Ejemplo n.º 1
0
// Run runs the specified APIServer.  This should never exit.
func Run(s *options.ServerRunOptions) error {
	// set defaults
	if err := s.GenericServerRunOptions.DefaultAdvertiseAddress(s.SecureServing, s.InsecureServing); err != nil {
		return err
	}
	serviceIPRange, apiServerServiceIP, err := master.DefaultServiceIPRange(s.ServiceClusterIPRange)
	if err != nil {
		return fmt.Errorf("error determining service IP ranges: %v", err)
	}
	if err := s.SecureServing.MaybeDefaultWithSelfSignedCerts(s.GenericServerRunOptions.AdvertiseAddress.String(), apiServerServiceIP); err != nil {
		return fmt.Errorf("error creating self-signed certificates: %v", err)
	}
	if err := s.CloudProvider.DefaultExternalHost(s.GenericServerRunOptions); err != nil {
		return fmt.Errorf("error setting the external host value: %v", err)
	}

	s.Authentication.ApplyAuthorization(s.Authorization)

	// validate options
	if errs := s.Validate(); len(errs) != 0 {
		return utilerrors.NewAggregate(errs)
	}

	// create config from options
	genericConfig := genericapiserver.NewConfig().
		ApplyOptions(s.GenericServerRunOptions).
		ApplyInsecureServingOptions(s.InsecureServing)

	if _, err := genericConfig.ApplySecureServingOptions(s.SecureServing); err != nil {
		return fmt.Errorf("failed to configure https: %s", err)
	}
	if err = s.Authentication.Apply(genericConfig); err != nil {
		return fmt.Errorf("failed to configure authentication: %s", err)
	}

	capabilities.Initialize(capabilities.Capabilities{
		AllowPrivileged: s.AllowPrivileged,
		// TODO(vmarmol): Implement support for HostNetworkSources.
		PrivilegedSources: capabilities.PrivilegedSources{
			HostNetworkSources: []string{},
			HostPIDSources:     []string{},
			HostIPCSources:     []string{},
		},
		PerConnectionBandwidthLimitBytesPerSec: s.MaxConnectionBytesPerSec,
	})

	// Setup nodeTunneler if needed
	var nodeTunneler tunneler.Tunneler
	var proxyDialerFn utilnet.DialFunc
	if len(s.SSHUser) > 0 {
		// Get ssh key distribution func, if supported
		var installSSHKey tunneler.InstallSSHKey
		cloud, err := cloudprovider.InitCloudProvider(s.CloudProvider.CloudProvider, s.CloudProvider.CloudConfigFile)
		if err != nil {
			return fmt.Errorf("cloud provider could not be initialized: %v", err)
		}
		if cloud != nil {
			if instances, supported := cloud.Instances(); supported {
				installSSHKey = instances.AddSSHKeyToAllInstances
			}
		}
		if s.KubeletConfig.Port == 0 {
			return fmt.Errorf("must enable kubelet port if proxy ssh-tunneling is specified")
		}
		if s.KubeletConfig.ReadOnlyPort == 0 {
			return fmt.Errorf("must enable kubelet readonly port if proxy ssh-tunneling is specified")
		}
		// Set up the nodeTunneler
		// TODO(cjcullen): If we want this to handle per-kubelet ports or other
		// kubelet listen-addresses, we need to plumb through options.
		healthCheckPath := &url.URL{
			Scheme: "http",
			Host:   net.JoinHostPort("127.0.0.1", strconv.FormatUint(uint64(s.KubeletConfig.ReadOnlyPort), 10)),
			Path:   "healthz",
		}
		nodeTunneler = tunneler.New(s.SSHUser, s.SSHKeyfile, healthCheckPath, installSSHKey)

		// Use the nodeTunneler's dialer to connect to the kubelet
		s.KubeletConfig.Dial = nodeTunneler.Dial
		// Use the nodeTunneler's dialer when proxying to pods, services, and nodes
		proxyDialerFn = nodeTunneler.Dial
	}

	// Proxying to pods and services is IP-based... don't expect to be able to verify the hostname
	proxyTLSClientConfig := &tls.Config{InsecureSkipVerify: true}

	if s.Etcd.StorageConfig.DeserializationCacheSize == 0 {
		// When size of cache is not explicitly set, estimate its size based on
		// target memory usage.
		glog.V(2).Infof("Initializing deserialization cache size based on %dMB limit", s.GenericServerRunOptions.TargetRAMMB)

		// This is the heuristics that from memory capacity is trying to infer
		// the maximum number of nodes in the cluster and set cache sizes based
		// on that value.
		// From our documentation, we officially recomment 120GB machines for
		// 2000 nodes, and we scale from that point. Thus we assume ~60MB of
		// capacity per node.
		// TODO: We may consider deciding that some percentage of memory will
		// be used for the deserialization cache and divide it by the max object
		// size to compute its size. We may even go further and measure
		// collective sizes of the objects in the cache.
		clusterSize := s.GenericServerRunOptions.TargetRAMMB / 60
		s.Etcd.StorageConfig.DeserializationCacheSize = 25 * clusterSize
		if s.Etcd.StorageConfig.DeserializationCacheSize < 1000 {
			s.Etcd.StorageConfig.DeserializationCacheSize = 1000
		}
	}

	storageGroupsToEncodingVersion, err := s.GenericServerRunOptions.StorageGroupsToEncodingVersion()
	if err != nil {
		return fmt.Errorf("error generating storage version map: %s", err)
	}
	storageFactory, err := kubeapiserver.BuildDefaultStorageFactory(
		s.Etcd.StorageConfig, s.GenericServerRunOptions.DefaultStorageMediaType, api.Codecs,
		genericapiserver.NewDefaultResourceEncodingConfig(), storageGroupsToEncodingVersion,
		// FIXME: this GroupVersionResource override should be configurable
		[]schema.GroupVersionResource{batch.Resource("cronjobs").WithVersion("v2alpha1")},
		master.DefaultAPIResourceConfigSource(), s.GenericServerRunOptions.RuntimeConfig)
	if err != nil {
		return fmt.Errorf("error in initializing storage factory: %s", err)
	}
	storageFactory.AddCohabitatingResources(autoscaling.Resource("horizontalpodautoscalers"), extensions.Resource("horizontalpodautoscalers"))
	for _, override := range s.Etcd.EtcdServersOverrides {
		tokens := strings.Split(override, "#")
		if len(tokens) != 2 {
			glog.Errorf("invalid value of etcd server overrides: %s", override)
			continue
		}

		apiresource := strings.Split(tokens[0], "/")
		if len(apiresource) != 2 {
			glog.Errorf("invalid resource definition: %s", tokens[0])
			continue
		}
		group := apiresource[0]
		resource := apiresource[1]
		groupResource := schema.GroupResource{Group: group, Resource: resource}

		servers := strings.Split(tokens[1], ";")
		storageFactory.SetEtcdLocation(groupResource, servers)
	}

	// Default to the private server key for service account token signing
	if len(s.Authentication.ServiceAccounts.KeyFiles) == 0 && s.SecureServing.ServerCert.CertKey.KeyFile != "" {
		if kubeauthenticator.IsValidServiceAccountKeyFile(s.SecureServing.ServerCert.CertKey.KeyFile) {
			s.Authentication.ServiceAccounts.KeyFiles = []string{s.SecureServing.ServerCert.CertKey.KeyFile}
		} else {
			glog.Warning("No TLS key provided, service account token authentication disabled")
		}
	}

	authenticatorConfig := s.Authentication.ToAuthenticationConfig()
	if s.Authentication.ServiceAccounts.Lookup {
		// If we need to look up service accounts and tokens,
		// go directly to etcd to avoid recursive auth insanity
		storageConfig, err := storageFactory.NewConfig(api.Resource("serviceaccounts"))
		if err != nil {
			return fmt.Errorf("unable to get serviceaccounts storage: %v", err)
		}
		authenticatorConfig.ServiceAccountTokenGetter = serviceaccountcontroller.NewGetterFromStorageInterface(storageConfig, storageFactory.ResourcePrefix(api.Resource("serviceaccounts")), storageFactory.ResourcePrefix(api.Resource("secrets")))
	}

	apiAuthenticator, securityDefinitions, err := authenticatorConfig.New()
	if err != nil {
		return fmt.Errorf("invalid Authentication Config: %v", err)
	}

	privilegedLoopbackToken := uuid.NewRandom().String()
	selfClientConfig, err := genericapiserver.NewSelfClientConfig(genericConfig.SecureServingInfo, genericConfig.InsecureServingInfo, privilegedLoopbackToken)
	if err != nil {
		return fmt.Errorf("failed to create clientset: %v", err)
	}
	client, err := internalclientset.NewForConfig(selfClientConfig)
	if err != nil {
		kubeAPIVersions := os.Getenv("KUBE_API_VERSIONS")
		if len(kubeAPIVersions) == 0 {
			return fmt.Errorf("failed to create clientset: %v", err)
		}

		// KUBE_API_VERSIONS is used in test-update-storage-objects.sh, disabling a number of API
		// groups. This leads to a nil client above and undefined behaviour further down.
		// TODO: get rid of KUBE_API_VERSIONS or define sane behaviour if set
		glog.Errorf("Failed to create clientset with KUBE_API_VERSIONS=%q. KUBE_API_VERSIONS is only for testing. Things will break.", kubeAPIVersions)
	}
	sharedInformers := informers.NewSharedInformerFactory(nil, client, 10*time.Minute)

	authorizationConfig := s.Authorization.ToAuthorizationConfig(sharedInformers)
	apiAuthorizer, err := authorizationConfig.New()
	if err != nil {
		return fmt.Errorf("invalid Authorization Config: %v", err)
	}

	admissionControlPluginNames := strings.Split(s.GenericServerRunOptions.AdmissionControl, ",")
	pluginInitializer := kubeadmission.NewPluginInitializer(client, sharedInformers, apiAuthorizer)
	admissionConfigProvider, err := kubeadmission.ReadAdmissionConfiguration(admissionControlPluginNames, s.GenericServerRunOptions.AdmissionControlConfigFile)
	if err != nil {
		return fmt.Errorf("failed to read plugin config: %v", err)
	}
	admissionController, err := admission.NewFromPlugins(admissionControlPluginNames, admissionConfigProvider, pluginInitializer)
	if err != nil {
		return fmt.Errorf("failed to initialize plugins: %v", err)
	}

	proxyTransport := utilnet.SetTransportDefaults(&http.Transport{
		Dial:            proxyDialerFn,
		TLSClientConfig: proxyTLSClientConfig,
	})
	kubeVersion := version.Get()

	genericConfig.Version = &kubeVersion
	genericConfig.LoopbackClientConfig = selfClientConfig
	genericConfig.Authenticator = apiAuthenticator
	genericConfig.Authorizer = apiAuthorizer
	genericConfig.AdmissionControl = admissionController
	genericConfig.OpenAPIConfig = genericapiserver.DefaultOpenAPIConfig(generatedopenapi.OpenAPIDefinitions)
	genericConfig.OpenAPIConfig.SecurityDefinitions = securityDefinitions
	genericConfig.OpenAPIConfig.Info.Title = "Kubernetes"
	genericConfig.SwaggerConfig = genericapiserver.DefaultSwaggerConfig()
	genericConfig.EnableMetrics = true
	genericConfig.LongRunningFunc = filters.BasicLongRunningRequestCheck(
		sets.NewString("watch", "proxy"),
		sets.NewString("attach", "exec", "proxy", "log", "portforward"),
	)

	config := &master.Config{
		GenericConfig: genericConfig,

		APIResourceConfigSource: storageFactory.APIResourceConfigSource,
		StorageFactory:          storageFactory,
		EnableWatchCache:        s.GenericServerRunOptions.EnableWatchCache,
		EnableCoreControllers:   true,
		DeleteCollectionWorkers: s.GenericServerRunOptions.DeleteCollectionWorkers,
		EventTTL:                s.EventTTL,
		KubeletClientConfig:     s.KubeletConfig,
		EnableUISupport:         true,
		EnableLogsSupport:       true,
		ProxyTransport:          proxyTransport,

		Tunneler: nodeTunneler,

		ServiceIPRange:       serviceIPRange,
		APIServerServiceIP:   apiServerServiceIP,
		APIServerServicePort: 443,

		ServiceNodePortRange:      s.ServiceNodePortRange,
		KubernetesServiceNodePort: s.KubernetesServiceNodePort,

		MasterCount: s.MasterCount,
	}

	if s.GenericServerRunOptions.EnableWatchCache {
		glog.V(2).Infof("Initializing cache sizes based on %dMB limit", s.GenericServerRunOptions.TargetRAMMB)
		cachesize.InitializeWatchCacheSizes(s.GenericServerRunOptions.TargetRAMMB)
		cachesize.SetWatchCacheSizes(s.GenericServerRunOptions.WatchCacheSizes)
	}

	m, err := config.Complete().New()
	if err != nil {
		return err
	}

	sharedInformers.Start(wait.NeverStop)
	m.GenericAPIServer.PrepareRun().Run(wait.NeverStop)
	return nil
}
Ejemplo n.º 2
0
// Run runs the specified APIServer.  This should never exit.
func Run(s *options.ServerRunOptions) error {
	genericvalidation.VerifyEtcdServersList(s.GenericServerRunOptions)
	genericapiserver.DefaultAndValidateRunOptions(s.GenericServerRunOptions)
	genericConfig := genericapiserver.NewConfig(). // create the new config
							ApplyOptions(s.GenericServerRunOptions). // apply the options selected
							Complete()                               // set default values based on the known values

	serviceIPRange, apiServerServiceIP, err := genericapiserver.DefaultServiceIPRange(s.GenericServerRunOptions.ServiceClusterIPRange)
	if err != nil {
		glog.Fatalf("Error determining service IP ranges: %v", err)
	}
	if err := genericConfig.MaybeGenerateServingCerts(apiServerServiceIP); err != nil {
		glog.Fatalf("Failed to generate service certificate: %v", err)
	}

	capabilities.Initialize(capabilities.Capabilities{
		AllowPrivileged: s.AllowPrivileged,
		// TODO(vmarmol): Implement support for HostNetworkSources.
		PrivilegedSources: capabilities.PrivilegedSources{
			HostNetworkSources: []string{},
			HostPIDSources:     []string{},
			HostIPCSources:     []string{},
		},
		PerConnectionBandwidthLimitBytesPerSec: s.MaxConnectionBytesPerSec,
	})

	// Setup tunneler if needed
	var tunneler genericapiserver.Tunneler
	var proxyDialerFn apiserver.ProxyDialerFunc
	if len(s.SSHUser) > 0 {
		// Get ssh key distribution func, if supported
		var installSSH genericapiserver.InstallSSHKey
		cloud, err := cloudprovider.InitCloudProvider(s.GenericServerRunOptions.CloudProvider, s.GenericServerRunOptions.CloudConfigFile)
		if err != nil {
			glog.Fatalf("Cloud provider could not be initialized: %v", err)
		}
		if cloud != nil {
			if instances, supported := cloud.Instances(); supported {
				installSSH = instances.AddSSHKeyToAllInstances
			}
		}
		if s.KubeletConfig.Port == 0 {
			glog.Fatalf("Must enable kubelet port if proxy ssh-tunneling is specified.")
		}
		// Set up the tunneler
		// TODO(cjcullen): If we want this to handle per-kubelet ports or other
		// kubelet listen-addresses, we need to plumb through options.
		healthCheckPath := &url.URL{
			Scheme: "https",
			Host:   net.JoinHostPort("127.0.0.1", strconv.FormatUint(uint64(s.KubeletConfig.Port), 10)),
			Path:   "healthz",
		}
		tunneler = genericapiserver.NewSSHTunneler(s.SSHUser, s.SSHKeyfile, healthCheckPath, installSSH)

		// Use the tunneler's dialer to connect to the kubelet
		s.KubeletConfig.Dial = tunneler.Dial
		// Use the tunneler's dialer when proxying to pods, services, and nodes
		proxyDialerFn = tunneler.Dial
	}

	// Proxying to pods and services is IP-based... don't expect to be able to verify the hostname
	proxyTLSClientConfig := &tls.Config{InsecureSkipVerify: true}

	if s.GenericServerRunOptions.StorageConfig.DeserializationCacheSize == 0 {
		// When size of cache is not explicitly set, estimate its size based on
		// target memory usage.
		glog.V(2).Infof("Initalizing deserialization cache size based on %dMB limit", s.GenericServerRunOptions.TargetRAMMB)

		// This is the heuristics that from memory capacity is trying to infer
		// the maximum number of nodes in the cluster and set cache sizes based
		// on that value.
		// From our documentation, we officially recomment 120GB machines for
		// 2000 nodes, and we scale from that point. Thus we assume ~60MB of
		// capacity per node.
		// TODO: We may consider deciding that some percentage of memory will
		// be used for the deserialization cache and divide it by the max object
		// size to compute its size. We may even go further and measure
		// collective sizes of the objects in the cache.
		clusterSize := s.GenericServerRunOptions.TargetRAMMB / 60
		s.GenericServerRunOptions.StorageConfig.DeserializationCacheSize = 25 * clusterSize
		if s.GenericServerRunOptions.StorageConfig.DeserializationCacheSize < 1000 {
			s.GenericServerRunOptions.StorageConfig.DeserializationCacheSize = 1000
		}
	}

	storageGroupsToEncodingVersion, err := s.GenericServerRunOptions.StorageGroupsToEncodingVersion()
	if err != nil {
		glog.Fatalf("error generating storage version map: %s", err)
	}
	storageFactory, err := genericapiserver.BuildDefaultStorageFactory(
		s.GenericServerRunOptions.StorageConfig, s.GenericServerRunOptions.DefaultStorageMediaType, api.Codecs,
		genericapiserver.NewDefaultResourceEncodingConfig(), storageGroupsToEncodingVersion,
		// FIXME: this GroupVersionResource override should be configurable
		[]schema.GroupVersionResource{batch.Resource("cronjobs").WithVersion("v2alpha1")},
		master.DefaultAPIResourceConfigSource(), s.GenericServerRunOptions.RuntimeConfig)
	if err != nil {
		glog.Fatalf("error in initializing storage factory: %s", err)
	}
	storageFactory.AddCohabitatingResources(batch.Resource("jobs"), extensions.Resource("jobs"))
	storageFactory.AddCohabitatingResources(autoscaling.Resource("horizontalpodautoscalers"), extensions.Resource("horizontalpodautoscalers"))
	for _, override := range s.GenericServerRunOptions.EtcdServersOverrides {
		tokens := strings.Split(override, "#")
		if len(tokens) != 2 {
			glog.Errorf("invalid value of etcd server overrides: %s", override)
			continue
		}

		apiresource := strings.Split(tokens[0], "/")
		if len(apiresource) != 2 {
			glog.Errorf("invalid resource definition: %s", tokens[0])
			continue
		}
		group := apiresource[0]
		resource := apiresource[1]
		groupResource := schema.GroupResource{Group: group, Resource: resource}

		servers := strings.Split(tokens[1], ";")
		storageFactory.SetEtcdLocation(groupResource, servers)
	}

	// Default to the private server key for service account token signing
	if len(s.ServiceAccountKeyFiles) == 0 && s.GenericServerRunOptions.TLSPrivateKeyFile != "" {
		if authenticator.IsValidServiceAccountKeyFile(s.GenericServerRunOptions.TLSPrivateKeyFile) {
			s.ServiceAccountKeyFiles = []string{s.GenericServerRunOptions.TLSPrivateKeyFile}
		} else {
			glog.Warning("No TLS key provided, service account token authentication disabled")
		}
	}

	var serviceAccountGetter serviceaccount.ServiceAccountTokenGetter
	if s.ServiceAccountLookup {
		// If we need to look up service accounts and tokens,
		// go directly to etcd to avoid recursive auth insanity
		storageConfig, err := storageFactory.NewConfig(api.Resource("serviceaccounts"))
		if err != nil {
			glog.Fatalf("Unable to get serviceaccounts storage: %v", err)
		}
		serviceAccountGetter = serviceaccountcontroller.NewGetterFromStorageInterface(storageConfig, storageFactory.ResourcePrefix(api.Resource("serviceaccounts")), storageFactory.ResourcePrefix(api.Resource("secrets")))
	}

	apiAuthenticator, securityDefinitions, err := authenticator.New(authenticator.AuthenticatorConfig{
		Anonymous:                   s.GenericServerRunOptions.AnonymousAuth,
		AnyToken:                    s.GenericServerRunOptions.EnableAnyToken,
		BasicAuthFile:               s.GenericServerRunOptions.BasicAuthFile,
		ClientCAFile:                s.GenericServerRunOptions.ClientCAFile,
		TokenAuthFile:               s.GenericServerRunOptions.TokenAuthFile,
		OIDCIssuerURL:               s.GenericServerRunOptions.OIDCIssuerURL,
		OIDCClientID:                s.GenericServerRunOptions.OIDCClientID,
		OIDCCAFile:                  s.GenericServerRunOptions.OIDCCAFile,
		OIDCUsernameClaim:           s.GenericServerRunOptions.OIDCUsernameClaim,
		OIDCGroupsClaim:             s.GenericServerRunOptions.OIDCGroupsClaim,
		ServiceAccountKeyFiles:      s.ServiceAccountKeyFiles,
		ServiceAccountLookup:        s.ServiceAccountLookup,
		ServiceAccountTokenGetter:   serviceAccountGetter,
		KeystoneURL:                 s.GenericServerRunOptions.KeystoneURL,
		KeystoneCAFile:              s.GenericServerRunOptions.KeystoneCAFile,
		WebhookTokenAuthnConfigFile: s.WebhookTokenAuthnConfigFile,
		WebhookTokenAuthnCacheTTL:   s.WebhookTokenAuthnCacheTTL,
		RequestHeaderConfig:         s.GenericServerRunOptions.AuthenticationRequestHeaderConfig(),
	})

	if err != nil {
		glog.Fatalf("Invalid Authentication Config: %v", err)
	}

	privilegedLoopbackToken := uuid.NewRandom().String()
	selfClientConfig, err := s.GenericServerRunOptions.NewSelfClientConfig(privilegedLoopbackToken)
	if err != nil {
		glog.Fatalf("Failed to create clientset: %v", err)
	}
	client, err := s.GenericServerRunOptions.NewSelfClient(privilegedLoopbackToken)
	if err != nil {
		glog.Errorf("Failed to create clientset: %v", err)
	}
	sharedInformers := informers.NewSharedInformerFactory(nil, client, 10*time.Minute)

	authorizationConfig := authorizer.AuthorizationConfig{
		PolicyFile:                  s.GenericServerRunOptions.AuthorizationPolicyFile,
		WebhookConfigFile:           s.GenericServerRunOptions.AuthorizationWebhookConfigFile,
		WebhookCacheAuthorizedTTL:   s.GenericServerRunOptions.AuthorizationWebhookCacheAuthorizedTTL,
		WebhookCacheUnauthorizedTTL: s.GenericServerRunOptions.AuthorizationWebhookCacheUnauthorizedTTL,
		RBACSuperUser:               s.GenericServerRunOptions.AuthorizationRBACSuperUser,
		InformerFactory:             sharedInformers,
	}
	authorizationModeNames := strings.Split(s.GenericServerRunOptions.AuthorizationMode, ",")
	apiAuthorizer, err := authorizer.NewAuthorizerFromAuthorizationConfig(authorizationModeNames, authorizationConfig)
	if err != nil {
		glog.Fatalf("Invalid Authorization Config: %v", err)
	}

	admissionControlPluginNames := strings.Split(s.GenericServerRunOptions.AdmissionControl, ",")

	// TODO(dims): We probably need to add an option "EnableLoopbackToken"
	if apiAuthenticator != nil {
		var uid = uuid.NewRandom().String()
		tokens := make(map[string]*user.DefaultInfo)
		tokens[privilegedLoopbackToken] = &user.DefaultInfo{
			Name:   user.APIServerUser,
			UID:    uid,
			Groups: []string{user.SystemPrivilegedGroup},
		}

		tokenAuthenticator := authenticator.NewAuthenticatorFromTokens(tokens)
		apiAuthenticator = authenticatorunion.New(tokenAuthenticator, apiAuthenticator)

		tokenAuthorizer := authorizer.NewPrivilegedGroups(user.SystemPrivilegedGroup)
		apiAuthorizer = authorizerunion.New(tokenAuthorizer, apiAuthorizer)
	}

	pluginInitializer := admission.NewPluginInitializer(sharedInformers, apiAuthorizer)

	admissionController, err := admission.NewFromPlugins(client, admissionControlPluginNames, s.GenericServerRunOptions.AdmissionControlConfigFile, pluginInitializer)
	if err != nil {
		glog.Fatalf("Failed to initialize plugins: %v", err)
	}

	proxyTransport := utilnet.SetTransportDefaults(&http.Transport{
		Dial:            proxyDialerFn,
		TLSClientConfig: proxyTLSClientConfig,
	})
	kubeVersion := version.Get()

	genericConfig.Version = &kubeVersion
	genericConfig.LoopbackClientConfig = selfClientConfig
	genericConfig.Authenticator = apiAuthenticator
	genericConfig.Authorizer = apiAuthorizer
	genericConfig.AdmissionControl = admissionController
	genericConfig.APIResourceConfigSource = storageFactory.APIResourceConfigSource
	genericConfig.OpenAPIConfig.Info.Title = "Kubernetes"
	genericConfig.OpenAPIConfig.Definitions = generatedopenapi.OpenAPIDefinitions
	genericConfig.EnableOpenAPISupport = true
	genericConfig.EnableMetrics = true
	genericConfig.OpenAPIConfig.SecurityDefinitions = securityDefinitions

	config := &master.Config{
		GenericConfig: genericConfig.Config,

		StorageFactory:          storageFactory,
		EnableWatchCache:        s.GenericServerRunOptions.EnableWatchCache,
		EnableCoreControllers:   true,
		DeleteCollectionWorkers: s.GenericServerRunOptions.DeleteCollectionWorkers,
		EventTTL:                s.EventTTL,
		KubeletClientConfig:     s.KubeletConfig,
		EnableUISupport:         true,
		EnableLogsSupport:       true,
		ProxyTransport:          proxyTransport,

		Tunneler: tunneler,

		ServiceIPRange:       serviceIPRange,
		APIServerServiceIP:   apiServerServiceIP,
		APIServerServicePort: 443,

		ServiceNodePortRange:      s.GenericServerRunOptions.ServiceNodePortRange,
		KubernetesServiceNodePort: s.GenericServerRunOptions.KubernetesServiceNodePort,

		MasterCount: s.GenericServerRunOptions.MasterCount,
	}

	if s.GenericServerRunOptions.EnableWatchCache {
		glog.V(2).Infof("Initalizing cache sizes based on %dMB limit", s.GenericServerRunOptions.TargetRAMMB)
		cachesize.InitializeWatchCacheSizes(s.GenericServerRunOptions.TargetRAMMB)
		cachesize.SetWatchCacheSizes(s.GenericServerRunOptions.WatchCacheSizes)
	}

	m, err := config.Complete().New()
	if err != nil {
		return err
	}

	sharedInformers.Start(wait.NeverStop)
	m.GenericAPIServer.PrepareRun().Run(wait.NeverStop)
	return nil
}