Example #1
0
File: ggen.go Project: ckeyer/gosrc
func savex(dr int, x *gc.Node, oldx *gc.Node, res *gc.Node, t *gc.Type) {
	r := gc.GetReg(dr)
	gc.Nodreg(x, gc.Types[gc.TINT32], dr)

	// save current ax and dx if they are live
	// and not the destination
	*oldx = gc.Node{}

	if r > 0 && !gc.Samereg(x, res) {
		gc.Tempname(oldx, gc.Types[gc.TINT32])
		gmove(x, oldx)
	}

	gc.Regalloc(x, t, x)
}
Example #2
0
File: ggen.go Project: ckeyer/gosrc
/*
 * register dr is one of the special ones (AX, CX, DI, SI, etc.).
 * we need to use it.  if it is already allocated as a temporary
 * (r > 1; can only happen if a routine like sgen passed a
 * special as cgen's res and then cgen used regalloc to reuse
 * it as its own temporary), then move it for now to another
 * register.  caller must call restx to move it back.
 * the move is not necessary if dr == res, because res is
 * known to be dead.
 */
func savex(dr int, x *gc.Node, oldx *gc.Node, res *gc.Node, t *gc.Type) {
	r := uint8(gc.GetReg(dr))

	// save current ax and dx if they are live
	// and not the destination
	*oldx = gc.Node{}

	gc.Nodreg(x, t, dr)
	if r > 1 && !gc.Samereg(x, res) {
		gc.Regalloc(oldx, gc.Types[gc.TINT64], nil)
		x.Type = gc.Types[gc.TINT64]
		gmove(x, oldx)
		x.Type = t
		// TODO(marvin): Fix Node.EType type union.
		oldx.Etype = gc.EType(r) // squirrel away old r value
		gc.SetReg(dr, 1)
	}
}
Example #3
0
File: ggen.go Project: ckeyer/gosrc
/*
 * generate shift according to op, one of:
 *	res = nl << nr
 *	res = nl >> nr
 */
func cgen_shift(op gc.Op, bounded bool, nl *gc.Node, nr *gc.Node, res *gc.Node) {
	a := optoas(op, nl.Type)

	if nr.Op == gc.OLITERAL {
		var n1 gc.Node
		gc.Regalloc(&n1, nl.Type, res)
		gc.Cgen(nl, &n1)
		sc := uint64(nr.Int())
		if sc >= uint64(nl.Type.Width*8) {
			// large shift gets 2 shifts by width-1
			var n3 gc.Node
			gc.Nodconst(&n3, gc.Types[gc.TUINT32], nl.Type.Width*8-1)

			gins(a, &n3, &n1)
			gins(a, &n3, &n1)
		} else {
			gins(a, nr, &n1)
		}
		gmove(&n1, res)
		gc.Regfree(&n1)
		return
	}

	if nl.Ullman >= gc.UINF {
		var n4 gc.Node
		gc.Tempname(&n4, nl.Type)
		gc.Cgen(nl, &n4)
		nl = &n4
	}

	if nr.Ullman >= gc.UINF {
		var n5 gc.Node
		gc.Tempname(&n5, nr.Type)
		gc.Cgen(nr, &n5)
		nr = &n5
	}

	rcx := gc.GetReg(x86.REG_CX)
	var n1 gc.Node
	gc.Nodreg(&n1, gc.Types[gc.TUINT32], x86.REG_CX)

	// Allow either uint32 or uint64 as shift type,
	// to avoid unnecessary conversion from uint32 to uint64
	// just to do the comparison.
	tcount := gc.Types[gc.Simtype[nr.Type.Etype]]

	if tcount.Etype < gc.TUINT32 {
		tcount = gc.Types[gc.TUINT32]
	}

	gc.Regalloc(&n1, nr.Type, &n1) // to hold the shift type in CX
	var n3 gc.Node
	gc.Regalloc(&n3, tcount, &n1) // to clear high bits of CX

	var cx gc.Node
	gc.Nodreg(&cx, gc.Types[gc.TUINT64], x86.REG_CX)

	var oldcx gc.Node
	if rcx > 0 && !gc.Samereg(&cx, res) {
		gc.Regalloc(&oldcx, gc.Types[gc.TUINT64], nil)
		gmove(&cx, &oldcx)
	}

	cx.Type = tcount

	var n2 gc.Node
	if gc.Samereg(&cx, res) {
		gc.Regalloc(&n2, nl.Type, nil)
	} else {
		gc.Regalloc(&n2, nl.Type, res)
	}
	if nl.Ullman >= nr.Ullman {
		gc.Cgen(nl, &n2)
		gc.Cgen(nr, &n1)
		gmove(&n1, &n3)
	} else {
		gc.Cgen(nr, &n1)
		gmove(&n1, &n3)
		gc.Cgen(nl, &n2)
	}

	gc.Regfree(&n3)

	// test and fix up large shifts
	if !bounded {
		gc.Nodconst(&n3, tcount, nl.Type.Width*8)
		gins(optoas(gc.OCMP, tcount), &n1, &n3)
		p1 := gc.Gbranch(optoas(gc.OLT, tcount), nil, +1)
		if op == gc.ORSH && gc.Issigned[nl.Type.Etype] {
			gc.Nodconst(&n3, gc.Types[gc.TUINT32], nl.Type.Width*8-1)
			gins(a, &n3, &n2)
		} else {
			gc.Nodconst(&n3, nl.Type, 0)
			gmove(&n3, &n2)
		}

		gc.Patch(p1, gc.Pc)
	}

	gins(a, &n1, &n2)

	if oldcx.Op != 0 {
		cx.Type = gc.Types[gc.TUINT64]
		gmove(&oldcx, &cx)
		gc.Regfree(&oldcx)
	}

	gmove(&n2, res)

	gc.Regfree(&n1)
	gc.Regfree(&n2)
}
Example #4
0
File: ggen.go Project: ckeyer/gosrc
/*
 * generate shift according to op, one of:
 *	res = nl << nr
 *	res = nl >> nr
 */
func cgen_shift(op gc.Op, bounded bool, nl *gc.Node, nr *gc.Node, res *gc.Node) {
	if nl.Type.Width > 4 {
		gc.Fatalf("cgen_shift %v", nl.Type)
	}

	w := int(nl.Type.Width * 8)

	a := optoas(op, nl.Type)

	if nr.Op == gc.OLITERAL {
		var n2 gc.Node
		gc.Tempname(&n2, nl.Type)
		gc.Cgen(nl, &n2)
		var n1 gc.Node
		gc.Regalloc(&n1, nl.Type, res)
		gmove(&n2, &n1)
		sc := uint64(nr.Int())
		if sc >= uint64(nl.Type.Width*8) {
			// large shift gets 2 shifts by width-1
			gins(a, ncon(uint32(w)-1), &n1)

			gins(a, ncon(uint32(w)-1), &n1)
		} else {
			gins(a, nr, &n1)
		}
		gmove(&n1, res)
		gc.Regfree(&n1)
		return
	}

	var oldcx gc.Node
	var cx gc.Node
	gc.Nodreg(&cx, gc.Types[gc.TUINT32], x86.REG_CX)
	if gc.GetReg(x86.REG_CX) > 1 && !gc.Samereg(&cx, res) {
		gc.Tempname(&oldcx, gc.Types[gc.TUINT32])
		gmove(&cx, &oldcx)
	}

	var n1 gc.Node
	var nt gc.Node
	if nr.Type.Width > 4 {
		gc.Tempname(&nt, nr.Type)
		n1 = nt
	} else {
		gc.Nodreg(&n1, gc.Types[gc.TUINT32], x86.REG_CX)
		gc.Regalloc(&n1, nr.Type, &n1) // to hold the shift type in CX
	}

	var n2 gc.Node
	if gc.Samereg(&cx, res) {
		gc.Regalloc(&n2, nl.Type, nil)
	} else {
		gc.Regalloc(&n2, nl.Type, res)
	}
	if nl.Ullman >= nr.Ullman {
		gc.Cgen(nl, &n2)
		gc.Cgen(nr, &n1)
	} else {
		gc.Cgen(nr, &n1)
		gc.Cgen(nl, &n2)
	}

	// test and fix up large shifts
	if bounded {
		if nr.Type.Width > 4 {
			// delayed reg alloc
			gc.Nodreg(&n1, gc.Types[gc.TUINT32], x86.REG_CX)

			gc.Regalloc(&n1, gc.Types[gc.TUINT32], &n1) // to hold the shift type in CX
			var lo gc.Node
			var hi gc.Node
			split64(&nt, &lo, &hi)
			gmove(&lo, &n1)
			splitclean()
		}
	} else {
		var p1 *obj.Prog
		if nr.Type.Width > 4 {
			// delayed reg alloc
			gc.Nodreg(&n1, gc.Types[gc.TUINT32], x86.REG_CX)

			gc.Regalloc(&n1, gc.Types[gc.TUINT32], &n1) // to hold the shift type in CX
			var lo gc.Node
			var hi gc.Node
			split64(&nt, &lo, &hi)
			gmove(&lo, &n1)
			gins(optoas(gc.OCMP, gc.Types[gc.TUINT32]), &hi, ncon(0))
			p2 := gc.Gbranch(optoas(gc.ONE, gc.Types[gc.TUINT32]), nil, +1)
			gins(optoas(gc.OCMP, gc.Types[gc.TUINT32]), &n1, ncon(uint32(w)))
			p1 = gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TUINT32]), nil, +1)
			splitclean()
			gc.Patch(p2, gc.Pc)
		} else {
			gins(optoas(gc.OCMP, nr.Type), &n1, ncon(uint32(w)))
			p1 = gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TUINT32]), nil, +1)
		}

		if op == gc.ORSH && gc.Issigned[nl.Type.Etype] {
			gins(a, ncon(uint32(w)-1), &n2)
		} else {
			gmove(ncon(0), &n2)
		}

		gc.Patch(p1, gc.Pc)
	}

	gins(a, &n1, &n2)

	if oldcx.Op != 0 {
		gmove(&oldcx, &cx)
	}

	gmove(&n2, res)

	gc.Regfree(&n1)
	gc.Regfree(&n2)
}
Example #5
0
File: ggen.go Project: ckeyer/gosrc
/*
 * generate division.
 * caller must set:
 *	ax = allocated AX register
 *	dx = allocated DX register
 * generates one of:
 *	res = nl / nr
 *	res = nl % nr
 * according to op.
 */
func dodiv(op gc.Op, nl *gc.Node, nr *gc.Node, res *gc.Node, ax *gc.Node, dx *gc.Node) {
	// Have to be careful about handling
	// most negative int divided by -1 correctly.
	// The hardware will trap.
	// Also the byte divide instruction needs AH,
	// which we otherwise don't have to deal with.
	// Easiest way to avoid for int8, int16: use int32.
	// For int32 and int64, use explicit test.
	// Could use int64 hw for int32.
	t := nl.Type

	t0 := t
	check := false
	if gc.Issigned[t.Etype] {
		check = true
		if gc.Isconst(nl, gc.CTINT) && nl.Int() != -1<<uint64(t.Width*8-1) {
			check = false
		} else if gc.Isconst(nr, gc.CTINT) && nr.Int() != -1 {
			check = false
		}
	}

	if t.Width < 4 {
		if gc.Issigned[t.Etype] {
			t = gc.Types[gc.TINT32]
		} else {
			t = gc.Types[gc.TUINT32]
		}
		check = false
	}

	var t1 gc.Node
	gc.Tempname(&t1, t)
	var t2 gc.Node
	gc.Tempname(&t2, t)
	if t0 != t {
		var t3 gc.Node
		gc.Tempname(&t3, t0)
		var t4 gc.Node
		gc.Tempname(&t4, t0)
		gc.Cgen(nl, &t3)
		gc.Cgen(nr, &t4)

		// Convert.
		gmove(&t3, &t1)

		gmove(&t4, &t2)
	} else {
		gc.Cgen(nl, &t1)
		gc.Cgen(nr, &t2)
	}

	var n1 gc.Node
	if !gc.Samereg(ax, res) && !gc.Samereg(dx, res) {
		gc.Regalloc(&n1, t, res)
	} else {
		gc.Regalloc(&n1, t, nil)
	}
	gmove(&t2, &n1)
	gmove(&t1, ax)
	var p2 *obj.Prog
	var n4 gc.Node
	if gc.Nacl {
		// Native Client does not relay the divide-by-zero trap
		// to the executing program, so we must insert a check
		// for ourselves.
		gc.Nodconst(&n4, t, 0)

		gins(optoas(gc.OCMP, t), &n1, &n4)
		p1 := gc.Gbranch(optoas(gc.ONE, t), nil, +1)
		if panicdiv == nil {
			panicdiv = gc.Sysfunc("panicdivide")
		}
		gc.Ginscall(panicdiv, -1)
		gc.Patch(p1, gc.Pc)
	}

	if check {
		gc.Nodconst(&n4, t, -1)
		gins(optoas(gc.OCMP, t), &n1, &n4)
		p1 := gc.Gbranch(optoas(gc.ONE, t), nil, +1)
		if op == gc.ODIV {
			// a / (-1) is -a.
			gins(optoas(gc.OMINUS, t), nil, ax)

			gmove(ax, res)
		} else {
			// a % (-1) is 0.
			gc.Nodconst(&n4, t, 0)

			gmove(&n4, res)
		}

		p2 = gc.Gbranch(obj.AJMP, nil, 0)
		gc.Patch(p1, gc.Pc)
	}

	if !gc.Issigned[t.Etype] {
		var nz gc.Node
		gc.Nodconst(&nz, t, 0)
		gmove(&nz, dx)
	} else {
		gins(optoas(gc.OEXTEND, t), nil, nil)
	}
	gins(optoas(op, t), &n1, nil)
	gc.Regfree(&n1)

	if op == gc.ODIV {
		gmove(ax, res)
	} else {
		gmove(dx, res)
	}
	if check {
		gc.Patch(p2, gc.Pc)
	}
}