// gmvc tries to move f to t using a mvc instruction.
// If successful it returns true, otherwise it returns false.
func gmvc(f, t *gc.Node) bool {
ft := int(gc.Simsimtype(f.Type))
tt := int(gc.Simsimtype(t.Type))
if ft != tt {
return false
}
if f.Op != gc.OINDREG || t.Op != gc.OINDREG {
return false
}
if f.Xoffset < 0 || f.Xoffset >= 4096 {
return false
}
if t.Xoffset < 0 || t.Xoffset >= 4096 {
return false
}
var len int64
switch ft {
case gc.TUINT8, gc.TINT8, gc.TBOOL:
len = 1
case gc.TUINT16, gc.TINT16:
len = 2
case gc.TUINT32, gc.TINT32, gc.TFLOAT32:
len = 4
case gc.TUINT64, gc.TINT64, gc.TFLOAT64, gc.TPTR64:
len = 8
case gc.TUNSAFEPTR:
len = int64(gc.Widthptr)
default:
return false
}
p := gc.Prog(s390x.AMVC)
gc.Naddr(&p.From, f)
gc.Naddr(&p.To, t)
p.From3 = new(obj.Addr)
p.From3.Offset = len
p.From3.Type = obj.TYPE_CONST
return true
}
/*
* generate move:
* t = f
* hard part is conversions.
*/
func gmove(f *gc.Node, t *gc.Node) {
if gc.Debug['M'] != 0 {
fmt.Printf("gmove %v -> %v\n", gc.Nconv(f, obj.FmtLong), gc.Nconv(t, obj.FmtLong))
}
ft := int(gc.Simsimtype(f.Type))
tt := int(gc.Simsimtype(t.Type))
cvt := (*gc.Type)(t.Type)
if gc.Iscomplex[ft] || gc.Iscomplex[tt] {
gc.Complexmove(f, t)
return
}
// cannot have two memory operands
var r1 gc.Node
var a int
if gc.Ismem(f) && gc.Ismem(t) {
goto hard
}
// convert constant to desired type
if f.Op == gc.OLITERAL {
var con gc.Node
switch tt {
default:
f.Convconst(&con, t.Type)
case gc.TINT32,
gc.TINT16,
gc.TINT8:
var con gc.Node
f.Convconst(&con, gc.Types[gc.TINT64])
var r1 gc.Node
gc.Regalloc(&r1, con.Type, t)
gins(arm64.AMOVD, &con, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
case gc.TUINT32,
gc.TUINT16,
gc.TUINT8:
var con gc.Node
f.Convconst(&con, gc.Types[gc.TUINT64])
var r1 gc.Node
gc.Regalloc(&r1, con.Type, t)
gins(arm64.AMOVD, &con, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
f = &con
ft = tt // so big switch will choose a simple mov
// constants can't move directly to memory.
if gc.Ismem(t) {
goto hard
}
}
// value -> value copy, first operand in memory.
// any floating point operand requires register
// src, so goto hard to copy to register first.
if gc.Ismem(f) && ft != tt && (gc.Isfloat[ft] || gc.Isfloat[tt]) {
cvt = gc.Types[ft]
goto hard
}
// value -> value copy, only one memory operand.
// figure out the instruction to use.
// break out of switch for one-instruction gins.
// goto rdst for "destination must be register".
// goto hard for "convert to cvt type first".
// otherwise handle and return.
switch uint32(ft)<<16 | uint32(tt) {
default:
gc.Fatalf("gmove %v -> %v", gc.Tconv(f.Type, obj.FmtLong), gc.Tconv(t.Type, obj.FmtLong))
/*
* integer copy and truncate
*/
case gc.TINT8<<16 | gc.TINT8, // same size
gc.TUINT8<<16 | gc.TINT8,
gc.TINT16<<16 | gc.TINT8,
// truncate
gc.TUINT16<<16 | gc.TINT8,
gc.TINT32<<16 | gc.TINT8,
gc.TUINT32<<16 | gc.TINT8,
gc.TINT64<<16 | gc.TINT8,
gc.TUINT64<<16 | gc.TINT8:
a = arm64.AMOVB
case gc.TINT8<<16 | gc.TUINT8, // same size
gc.TUINT8<<16 | gc.TUINT8,
gc.TINT16<<16 | gc.TUINT8,
// truncate
gc.TUINT16<<16 | gc.TUINT8,
gc.TINT32<<16 | gc.TUINT8,
gc.TUINT32<<16 | gc.TUINT8,
gc.TINT64<<16 | gc.TUINT8,
gc.TUINT64<<16 | gc.TUINT8:
a = arm64.AMOVBU
case gc.TINT16<<16 | gc.TINT16, // same size
gc.TUINT16<<16 | gc.TINT16,
gc.TINT32<<16 | gc.TINT16,
// truncate
gc.TUINT32<<16 | gc.TINT16,
gc.TINT64<<16 | gc.TINT16,
gc.TUINT64<<16 | gc.TINT16:
a = arm64.AMOVH
case gc.TINT16<<16 | gc.TUINT16, // same size
gc.TUINT16<<16 | gc.TUINT16,
gc.TINT32<<16 | gc.TUINT16,
// truncate
gc.TUINT32<<16 | gc.TUINT16,
gc.TINT64<<16 | gc.TUINT16,
gc.TUINT64<<16 | gc.TUINT16:
a = arm64.AMOVHU
case gc.TINT32<<16 | gc.TINT32, // same size
gc.TUINT32<<16 | gc.TINT32,
gc.TINT64<<16 | gc.TINT32,
// truncate
gc.TUINT64<<16 | gc.TINT32:
a = arm64.AMOVW
case gc.TINT32<<16 | gc.TUINT32, // same size
gc.TUINT32<<16 | gc.TUINT32,
gc.TINT64<<16 | gc.TUINT32,
gc.TUINT64<<16 | gc.TUINT32:
a = arm64.AMOVWU
case gc.TINT64<<16 | gc.TINT64, // same size
gc.TINT64<<16 | gc.TUINT64,
gc.TUINT64<<16 | gc.TINT64,
gc.TUINT64<<16 | gc.TUINT64:
a = arm64.AMOVD
/*
* integer up-conversions
*/
case gc.TINT8<<16 | gc.TINT16, // sign extend int8
gc.TINT8<<16 | gc.TUINT16,
gc.TINT8<<16 | gc.TINT32,
gc.TINT8<<16 | gc.TUINT32,
gc.TINT8<<16 | gc.TINT64,
gc.TINT8<<16 | gc.TUINT64:
a = arm64.AMOVB
goto rdst
case gc.TUINT8<<16 | gc.TINT16, // zero extend uint8
gc.TUINT8<<16 | gc.TUINT16,
gc.TUINT8<<16 | gc.TINT32,
gc.TUINT8<<16 | gc.TUINT32,
gc.TUINT8<<16 | gc.TINT64,
gc.TUINT8<<16 | gc.TUINT64:
a = arm64.AMOVBU
goto rdst
case gc.TINT16<<16 | gc.TINT32, // sign extend int16
gc.TINT16<<16 | gc.TUINT32,
gc.TINT16<<16 | gc.TINT64,
gc.TINT16<<16 | gc.TUINT64:
a = arm64.AMOVH
goto rdst
case gc.TUINT16<<16 | gc.TINT32, // zero extend uint16
gc.TUINT16<<16 | gc.TUINT32,
gc.TUINT16<<16 | gc.TINT64,
gc.TUINT16<<16 | gc.TUINT64:
a = arm64.AMOVHU
goto rdst
case gc.TINT32<<16 | gc.TINT64, // sign extend int32
gc.TINT32<<16 | gc.TUINT64:
a = arm64.AMOVW
goto rdst
case gc.TUINT32<<16 | gc.TINT64, // zero extend uint32
gc.TUINT32<<16 | gc.TUINT64:
a = arm64.AMOVWU
goto rdst
/*
* float to integer
*/
case gc.TFLOAT32<<16 | gc.TINT32:
a = arm64.AFCVTZSSW
goto rdst
case gc.TFLOAT64<<16 | gc.TINT32:
a = arm64.AFCVTZSDW
goto rdst
case gc.TFLOAT32<<16 | gc.TINT64:
a = arm64.AFCVTZSS
goto rdst
case gc.TFLOAT64<<16 | gc.TINT64:
a = arm64.AFCVTZSD
goto rdst
case gc.TFLOAT32<<16 | gc.TUINT32:
a = arm64.AFCVTZUSW
goto rdst
case gc.TFLOAT64<<16 | gc.TUINT32:
a = arm64.AFCVTZUDW
goto rdst
case gc.TFLOAT32<<16 | gc.TUINT64:
a = arm64.AFCVTZUS
goto rdst
case gc.TFLOAT64<<16 | gc.TUINT64:
a = arm64.AFCVTZUD
goto rdst
case gc.TFLOAT32<<16 | gc.TINT16,
gc.TFLOAT32<<16 | gc.TINT8,
gc.TFLOAT64<<16 | gc.TINT16,
gc.TFLOAT64<<16 | gc.TINT8:
cvt = gc.Types[gc.TINT32]
goto hard
case gc.TFLOAT32<<16 | gc.TUINT16,
gc.TFLOAT32<<16 | gc.TUINT8,
gc.TFLOAT64<<16 | gc.TUINT16,
gc.TFLOAT64<<16 | gc.TUINT8:
cvt = gc.Types[gc.TUINT32]
goto hard
/*
* integer to float
*/
case gc.TINT8<<16 | gc.TFLOAT32,
gc.TINT16<<16 | gc.TFLOAT32,
gc.TINT32<<16 | gc.TFLOAT32:
a = arm64.ASCVTFWS
goto rdst
case gc.TINT8<<16 | gc.TFLOAT64,
gc.TINT16<<16 | gc.TFLOAT64,
gc.TINT32<<16 | gc.TFLOAT64:
a = arm64.ASCVTFWD
goto rdst
case gc.TINT64<<16 | gc.TFLOAT32:
a = arm64.ASCVTFS
goto rdst
case gc.TINT64<<16 | gc.TFLOAT64:
a = arm64.ASCVTFD
goto rdst
case gc.TUINT8<<16 | gc.TFLOAT32,
gc.TUINT16<<16 | gc.TFLOAT32,
gc.TUINT32<<16 | gc.TFLOAT32:
a = arm64.AUCVTFWS
goto rdst
case gc.TUINT8<<16 | gc.TFLOAT64,
gc.TUINT16<<16 | gc.TFLOAT64,
gc.TUINT32<<16 | gc.TFLOAT64:
a = arm64.AUCVTFWD
goto rdst
case gc.TUINT64<<16 | gc.TFLOAT32:
a = arm64.AUCVTFS
goto rdst
case gc.TUINT64<<16 | gc.TFLOAT64:
a = arm64.AUCVTFD
goto rdst
/*
* float to float
*/
case gc.TFLOAT32<<16 | gc.TFLOAT32:
a = arm64.AFMOVS
case gc.TFLOAT64<<16 | gc.TFLOAT64:
a = arm64.AFMOVD
case gc.TFLOAT32<<16 | gc.TFLOAT64:
a = arm64.AFCVTSD
goto rdst
case gc.TFLOAT64<<16 | gc.TFLOAT32:
a = arm64.AFCVTDS
goto rdst
}
gins(a, f, t)
return
// requires register destination
rdst:
gc.Regalloc(&r1, t.Type, t)
gins(a, f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
// requires register intermediate
hard:
gc.Regalloc(&r1, cvt, t)
gmove(f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
/*
* generate move:
* t = f
* hard part is conversions.
*/
func gmove(f *gc.Node, t *gc.Node) {
if gc.Debug['M'] != 0 {
fmt.Printf("gmove %v -> %v\n", gc.Nconv(f, obj.FmtLong), gc.Nconv(t, obj.FmtLong))
}
ft := int(gc.Simsimtype(f.Type))
tt := int(gc.Simsimtype(t.Type))
cvt := (*gc.Type)(t.Type)
if gc.Iscomplex[ft] || gc.Iscomplex[tt] {
gc.Complexmove(f, t)
return
}
// cannot have two memory operands
var r2 gc.Node
var r1 gc.Node
var a int
if gc.Ismem(f) && gc.Ismem(t) {
goto hard
}
// convert constant to desired type
if f.Op == gc.OLITERAL {
var con gc.Node
switch tt {
default:
f.Convconst(&con, t.Type)
case gc.TINT32,
gc.TINT16,
gc.TINT8:
var con gc.Node
f.Convconst(&con, gc.Types[gc.TINT64])
var r1 gc.Node
gc.Regalloc(&r1, con.Type, t)
gins(ppc64.AMOVD, &con, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
case gc.TUINT32,
gc.TUINT16,
gc.TUINT8:
var con gc.Node
f.Convconst(&con, gc.Types[gc.TUINT64])
var r1 gc.Node
gc.Regalloc(&r1, con.Type, t)
gins(ppc64.AMOVD, &con, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
f = &con
ft = tt // so big switch will choose a simple mov
// constants can't move directly to memory.
if gc.Ismem(t) {
goto hard
}
}
// float constants come from memory.
//if(isfloat[tt])
// goto hard;
// 64-bit immediates are also from memory.
//if(isint[tt])
// goto hard;
//// 64-bit immediates are really 32-bit sign-extended
//// unless moving into a register.
//if(isint[tt]) {
// if(mpcmpfixfix(con.val.u.xval, minintval[TINT32]) < 0)
// goto hard;
// if(mpcmpfixfix(con.val.u.xval, maxintval[TINT32]) > 0)
// goto hard;
//}
// value -> value copy, only one memory operand.
// figure out the instruction to use.
// break out of switch for one-instruction gins.
// goto rdst for "destination must be register".
// goto hard for "convert to cvt type first".
// otherwise handle and return.
switch uint32(ft)<<16 | uint32(tt) {
default:
gc.Fatalf("gmove %v -> %v", gc.Tconv(f.Type, obj.FmtLong), gc.Tconv(t.Type, obj.FmtLong))
/*
* integer copy and truncate
*/
case gc.TINT8<<16 | gc.TINT8, // same size
gc.TUINT8<<16 | gc.TINT8,
gc.TINT16<<16 | gc.TINT8,
// truncate
gc.TUINT16<<16 | gc.TINT8,
gc.TINT32<<16 | gc.TINT8,
gc.TUINT32<<16 | gc.TINT8,
gc.TINT64<<16 | gc.TINT8,
gc.TUINT64<<16 | gc.TINT8:
a = ppc64.AMOVB
case gc.TINT8<<16 | gc.TUINT8, // same size
gc.TUINT8<<16 | gc.TUINT8,
gc.TINT16<<16 | gc.TUINT8,
// truncate
gc.TUINT16<<16 | gc.TUINT8,
gc.TINT32<<16 | gc.TUINT8,
gc.TUINT32<<16 | gc.TUINT8,
gc.TINT64<<16 | gc.TUINT8,
gc.TUINT64<<16 | gc.TUINT8:
a = ppc64.AMOVBZ
case gc.TINT16<<16 | gc.TINT16, // same size
gc.TUINT16<<16 | gc.TINT16,
gc.TINT32<<16 | gc.TINT16,
// truncate
gc.TUINT32<<16 | gc.TINT16,
gc.TINT64<<16 | gc.TINT16,
gc.TUINT64<<16 | gc.TINT16:
a = ppc64.AMOVH
case gc.TINT16<<16 | gc.TUINT16, // same size
gc.TUINT16<<16 | gc.TUINT16,
gc.TINT32<<16 | gc.TUINT16,
// truncate
gc.TUINT32<<16 | gc.TUINT16,
gc.TINT64<<16 | gc.TUINT16,
gc.TUINT64<<16 | gc.TUINT16:
a = ppc64.AMOVHZ
case gc.TINT32<<16 | gc.TINT32, // same size
gc.TUINT32<<16 | gc.TINT32,
gc.TINT64<<16 | gc.TINT32,
// truncate
gc.TUINT64<<16 | gc.TINT32:
a = ppc64.AMOVW
case gc.TINT32<<16 | gc.TUINT32, // same size
gc.TUINT32<<16 | gc.TUINT32,
gc.TINT64<<16 | gc.TUINT32,
gc.TUINT64<<16 | gc.TUINT32:
a = ppc64.AMOVWZ
case gc.TINT64<<16 | gc.TINT64, // same size
gc.TINT64<<16 | gc.TUINT64,
gc.TUINT64<<16 | gc.TINT64,
gc.TUINT64<<16 | gc.TUINT64:
a = ppc64.AMOVD
/*
* integer up-conversions
*/
case gc.TINT8<<16 | gc.TINT16, // sign extend int8
gc.TINT8<<16 | gc.TUINT16,
gc.TINT8<<16 | gc.TINT32,
gc.TINT8<<16 | gc.TUINT32,
gc.TINT8<<16 | gc.TINT64,
gc.TINT8<<16 | gc.TUINT64:
a = ppc64.AMOVB
goto rdst
case gc.TUINT8<<16 | gc.TINT16, // zero extend uint8
gc.TUINT8<<16 | gc.TUINT16,
gc.TUINT8<<16 | gc.TINT32,
gc.TUINT8<<16 | gc.TUINT32,
gc.TUINT8<<16 | gc.TINT64,
gc.TUINT8<<16 | gc.TUINT64:
a = ppc64.AMOVBZ
goto rdst
case gc.TINT16<<16 | gc.TINT32, // sign extend int16
gc.TINT16<<16 | gc.TUINT32,
gc.TINT16<<16 | gc.TINT64,
gc.TINT16<<16 | gc.TUINT64:
a = ppc64.AMOVH
goto rdst
case gc.TUINT16<<16 | gc.TINT32, // zero extend uint16
gc.TUINT16<<16 | gc.TUINT32,
gc.TUINT16<<16 | gc.TINT64,
gc.TUINT16<<16 | gc.TUINT64:
a = ppc64.AMOVHZ
goto rdst
case gc.TINT32<<16 | gc.TINT64, // sign extend int32
gc.TINT32<<16 | gc.TUINT64:
a = ppc64.AMOVW
goto rdst
case gc.TUINT32<<16 | gc.TINT64, // zero extend uint32
gc.TUINT32<<16 | gc.TUINT64:
a = ppc64.AMOVWZ
goto rdst
//warn("gmove: convert float to int not implemented: %N -> %N\n", f, t);
//return;
// algorithm is:
// if small enough, use native float64 -> int64 conversion.
// otherwise, subtract 2^63, convert, and add it back.
/*
* float to integer
*/
case gc.TFLOAT32<<16 | gc.TINT32,
gc.TFLOAT64<<16 | gc.TINT32,
gc.TFLOAT32<<16 | gc.TINT64,
gc.TFLOAT64<<16 | gc.TINT64,
gc.TFLOAT32<<16 | gc.TINT16,
gc.TFLOAT32<<16 | gc.TINT8,
gc.TFLOAT32<<16 | gc.TUINT16,
gc.TFLOAT32<<16 | gc.TUINT8,
gc.TFLOAT64<<16 | gc.TINT16,
gc.TFLOAT64<<16 | gc.TINT8,
gc.TFLOAT64<<16 | gc.TUINT16,
gc.TFLOAT64<<16 | gc.TUINT8,
gc.TFLOAT32<<16 | gc.TUINT32,
gc.TFLOAT64<<16 | gc.TUINT32,
gc.TFLOAT32<<16 | gc.TUINT64,
gc.TFLOAT64<<16 | gc.TUINT64:
bignodes()
var r1 gc.Node
gc.Regalloc(&r1, gc.Types[ft], f)
gmove(f, &r1)
if tt == gc.TUINT64 {
gc.Regalloc(&r2, gc.Types[gc.TFLOAT64], nil)
gmove(&bigf, &r2)
gins(ppc64.AFCMPU, &r1, &r2)
p1 := (*obj.Prog)(gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TFLOAT64]), nil, +1))
gins(ppc64.AFSUB, &r2, &r1)
gc.Patch(p1, gc.Pc)
gc.Regfree(&r2)
}
gc.Regalloc(&r2, gc.Types[gc.TFLOAT64], nil)
var r3 gc.Node
gc.Regalloc(&r3, gc.Types[gc.TINT64], t)
gins(ppc64.AFCTIDZ, &r1, &r2)
p1 := (*obj.Prog)(gins(ppc64.AFMOVD, &r2, nil))
p1.To.Type = obj.TYPE_MEM
p1.To.Reg = ppc64.REGSP
p1.To.Offset = -8
p1 = gins(ppc64.AMOVD, nil, &r3)
p1.From.Type = obj.TYPE_MEM
p1.From.Reg = ppc64.REGSP
p1.From.Offset = -8
gc.Regfree(&r2)
gc.Regfree(&r1)
if tt == gc.TUINT64 {
p1 := (*obj.Prog)(gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TFLOAT64]), nil, +1)) // use CR0 here again
gc.Nodreg(&r1, gc.Types[gc.TINT64], ppc64.REGTMP)
gins(ppc64.AMOVD, &bigi, &r1)
gins(ppc64.AADD, &r1, &r3)
gc.Patch(p1, gc.Pc)
}
gmove(&r3, t)
gc.Regfree(&r3)
return
//warn("gmove: convert int to float not implemented: %N -> %N\n", f, t);
//return;
// algorithm is:
// if small enough, use native int64 -> uint64 conversion.
// otherwise, halve (rounding to odd?), convert, and double.
/*
* integer to float
*/
case gc.TINT32<<16 | gc.TFLOAT32,
gc.TINT32<<16 | gc.TFLOAT64,
gc.TINT64<<16 | gc.TFLOAT32,
gc.TINT64<<16 | gc.TFLOAT64,
gc.TINT16<<16 | gc.TFLOAT32,
gc.TINT16<<16 | gc.TFLOAT64,
gc.TINT8<<16 | gc.TFLOAT32,
gc.TINT8<<16 | gc.TFLOAT64,
gc.TUINT16<<16 | gc.TFLOAT32,
gc.TUINT16<<16 | gc.TFLOAT64,
gc.TUINT8<<16 | gc.TFLOAT32,
gc.TUINT8<<16 | gc.TFLOAT64,
gc.TUINT32<<16 | gc.TFLOAT32,
gc.TUINT32<<16 | gc.TFLOAT64,
gc.TUINT64<<16 | gc.TFLOAT32,
gc.TUINT64<<16 | gc.TFLOAT64:
bignodes()
var r1 gc.Node
gc.Regalloc(&r1, gc.Types[gc.TINT64], nil)
gmove(f, &r1)
if ft == gc.TUINT64 {
gc.Nodreg(&r2, gc.Types[gc.TUINT64], ppc64.REGTMP)
gmove(&bigi, &r2)
gins(ppc64.ACMPU, &r1, &r2)
p1 := (*obj.Prog)(gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TUINT64]), nil, +1))
p2 := (*obj.Prog)(gins(ppc64.ASRD, nil, &r1))
p2.From.Type = obj.TYPE_CONST
p2.From.Offset = 1
gc.Patch(p1, gc.Pc)
}
gc.Regalloc(&r2, gc.Types[gc.TFLOAT64], t)
p1 := (*obj.Prog)(gins(ppc64.AMOVD, &r1, nil))
p1.To.Type = obj.TYPE_MEM
p1.To.Reg = ppc64.REGSP
p1.To.Offset = -8
p1 = gins(ppc64.AFMOVD, nil, &r2)
p1.From.Type = obj.TYPE_MEM
p1.From.Reg = ppc64.REGSP
p1.From.Offset = -8
gins(ppc64.AFCFID, &r2, &r2)
gc.Regfree(&r1)
if ft == gc.TUINT64 {
p1 := (*obj.Prog)(gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TUINT64]), nil, +1)) // use CR0 here again
gc.Nodreg(&r1, gc.Types[gc.TFLOAT64], ppc64.FREGTWO)
gins(ppc64.AFMUL, &r1, &r2)
gc.Patch(p1, gc.Pc)
}
gmove(&r2, t)
gc.Regfree(&r2)
return
/*
* float to float
*/
case gc.TFLOAT32<<16 | gc.TFLOAT32:
a = ppc64.AFMOVS
case gc.TFLOAT64<<16 | gc.TFLOAT64:
a = ppc64.AFMOVD
case gc.TFLOAT32<<16 | gc.TFLOAT64:
a = ppc64.AFMOVS
goto rdst
case gc.TFLOAT64<<16 | gc.TFLOAT32:
a = ppc64.AFRSP
goto rdst
}
gins(a, f, t)
return
// requires register destination
rdst:
{
gc.Regalloc(&r1, t.Type, t)
gins(a, f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
// requires register intermediate
hard:
gc.Regalloc(&r1, cvt, t)
gmove(f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
func gmove(f *gc.Node, t *gc.Node) {
if gc.Debug['M'] != 0 {
fmt.Printf("gmove %v -> %v\n", f, t)
}
ft := gc.Simsimtype(f.Type)
tt := gc.Simsimtype(t.Type)
cvt := t.Type
if gc.Iscomplex[ft] || gc.Iscomplex[tt] {
gc.Complexmove(f, t)
return
}
if gc.Isfloat[ft] || gc.Isfloat[tt] {
floatmove(f, t)
return
}
// cannot have two integer memory operands;
// except 64-bit, which always copies via registers anyway.
var r1 gc.Node
var a int
if gc.Isint[ft] && gc.Isint[tt] && !gc.Is64(f.Type) && !gc.Is64(t.Type) && gc.Ismem(f) && gc.Ismem(t) {
goto hard
}
// convert constant to desired type
if f.Op == gc.OLITERAL {
var con gc.Node
f.Convconst(&con, t.Type)
f = &con
ft = gc.Simsimtype(con.Type)
}
// value -> value copy, only one memory operand.
// figure out the instruction to use.
// break out of switch for one-instruction gins.
// goto rdst for "destination must be register".
// goto hard for "convert to cvt type first".
// otherwise handle and return.
switch uint32(ft)<<16 | uint32(tt) {
default:
// should not happen
gc.Fatalf("gmove %v -> %v", f, t)
return
/*
* integer copy and truncate
*/
case gc.TINT8<<16 | gc.TINT8, // same size
gc.TINT8<<16 | gc.TUINT8,
gc.TUINT8<<16 | gc.TINT8,
gc.TUINT8<<16 | gc.TUINT8:
a = x86.AMOVB
case gc.TINT16<<16 | gc.TINT8, // truncate
gc.TUINT16<<16 | gc.TINT8,
gc.TINT32<<16 | gc.TINT8,
gc.TUINT32<<16 | gc.TINT8,
gc.TINT16<<16 | gc.TUINT8,
gc.TUINT16<<16 | gc.TUINT8,
gc.TINT32<<16 | gc.TUINT8,
gc.TUINT32<<16 | gc.TUINT8:
a = x86.AMOVB
goto rsrc
case gc.TINT64<<16 | gc.TINT8, // truncate low word
gc.TUINT64<<16 | gc.TINT8,
gc.TINT64<<16 | gc.TUINT8,
gc.TUINT64<<16 | gc.TUINT8:
var flo gc.Node
var fhi gc.Node
split64(f, &flo, &fhi)
var r1 gc.Node
gc.Nodreg(&r1, t.Type, x86.REG_AX)
gmove(&flo, &r1)
gins(x86.AMOVB, &r1, t)
splitclean()
return
case gc.TINT16<<16 | gc.TINT16, // same size
gc.TINT16<<16 | gc.TUINT16,
gc.TUINT16<<16 | gc.TINT16,
gc.TUINT16<<16 | gc.TUINT16:
a = x86.AMOVW
case gc.TINT32<<16 | gc.TINT16, // truncate
gc.TUINT32<<16 | gc.TINT16,
gc.TINT32<<16 | gc.TUINT16,
gc.TUINT32<<16 | gc.TUINT16:
a = x86.AMOVW
goto rsrc
case gc.TINT64<<16 | gc.TINT16, // truncate low word
gc.TUINT64<<16 | gc.TINT16,
gc.TINT64<<16 | gc.TUINT16,
gc.TUINT64<<16 | gc.TUINT16:
var flo gc.Node
var fhi gc.Node
split64(f, &flo, &fhi)
var r1 gc.Node
gc.Nodreg(&r1, t.Type, x86.REG_AX)
gmove(&flo, &r1)
gins(x86.AMOVW, &r1, t)
splitclean()
return
case gc.TINT32<<16 | gc.TINT32, // same size
gc.TINT32<<16 | gc.TUINT32,
gc.TUINT32<<16 | gc.TINT32,
gc.TUINT32<<16 | gc.TUINT32:
a = x86.AMOVL
case gc.TINT64<<16 | gc.TINT32, // truncate
gc.TUINT64<<16 | gc.TINT32,
gc.TINT64<<16 | gc.TUINT32,
gc.TUINT64<<16 | gc.TUINT32:
var fhi gc.Node
var flo gc.Node
split64(f, &flo, &fhi)
var r1 gc.Node
gc.Nodreg(&r1, t.Type, x86.REG_AX)
gmove(&flo, &r1)
gins(x86.AMOVL, &r1, t)
splitclean()
return
case gc.TINT64<<16 | gc.TINT64, // same size
gc.TINT64<<16 | gc.TUINT64,
gc.TUINT64<<16 | gc.TINT64,
gc.TUINT64<<16 | gc.TUINT64:
var fhi gc.Node
var flo gc.Node
split64(f, &flo, &fhi)
var tlo gc.Node
var thi gc.Node
split64(t, &tlo, &thi)
if f.Op == gc.OLITERAL {
gins(x86.AMOVL, &flo, &tlo)
gins(x86.AMOVL, &fhi, &thi)
} else {
// Implementation of conversion-free x = y for int64 or uint64 x.
// This is generated by the code that copies small values out of closures,
// and that code has DX live, so avoid DX and just use AX twice.
var r1 gc.Node
gc.Nodreg(&r1, gc.Types[gc.TUINT32], x86.REG_AX)
gins(x86.AMOVL, &flo, &r1)
gins(x86.AMOVL, &r1, &tlo)
gins(x86.AMOVL, &fhi, &r1)
gins(x86.AMOVL, &r1, &thi)
}
splitclean()
splitclean()
return
/*
* integer up-conversions
*/
case gc.TINT8<<16 | gc.TINT16, // sign extend int8
gc.TINT8<<16 | gc.TUINT16:
a = x86.AMOVBWSX
goto rdst
case gc.TINT8<<16 | gc.TINT32,
gc.TINT8<<16 | gc.TUINT32:
a = x86.AMOVBLSX
goto rdst
case gc.TINT8<<16 | gc.TINT64, // convert via int32
gc.TINT8<<16 | gc.TUINT64:
cvt = gc.Types[gc.TINT32]
goto hard
case gc.TUINT8<<16 | gc.TINT16, // zero extend uint8
gc.TUINT8<<16 | gc.TUINT16:
a = x86.AMOVBWZX
goto rdst
case gc.TUINT8<<16 | gc.TINT32,
gc.TUINT8<<16 | gc.TUINT32:
a = x86.AMOVBLZX
goto rdst
case gc.TUINT8<<16 | gc.TINT64, // convert via uint32
gc.TUINT8<<16 | gc.TUINT64:
cvt = gc.Types[gc.TUINT32]
goto hard
case gc.TINT16<<16 | gc.TINT32, // sign extend int16
gc.TINT16<<16 | gc.TUINT32:
a = x86.AMOVWLSX
goto rdst
case gc.TINT16<<16 | gc.TINT64, // convert via int32
gc.TINT16<<16 | gc.TUINT64:
cvt = gc.Types[gc.TINT32]
goto hard
case gc.TUINT16<<16 | gc.TINT32, // zero extend uint16
gc.TUINT16<<16 | gc.TUINT32:
a = x86.AMOVWLZX
goto rdst
case gc.TUINT16<<16 | gc.TINT64, // convert via uint32
gc.TUINT16<<16 | gc.TUINT64:
cvt = gc.Types[gc.TUINT32]
goto hard
case gc.TINT32<<16 | gc.TINT64, // sign extend int32
gc.TINT32<<16 | gc.TUINT64:
var thi gc.Node
var tlo gc.Node
split64(t, &tlo, &thi)
var flo gc.Node
gc.Nodreg(&flo, tlo.Type, x86.REG_AX)
var fhi gc.Node
gc.Nodreg(&fhi, thi.Type, x86.REG_DX)
gmove(f, &flo)
gins(x86.ACDQ, nil, nil)
gins(x86.AMOVL, &flo, &tlo)
gins(x86.AMOVL, &fhi, &thi)
splitclean()
return
case gc.TUINT32<<16 | gc.TINT64, // zero extend uint32
gc.TUINT32<<16 | gc.TUINT64:
var tlo gc.Node
var thi gc.Node
split64(t, &tlo, &thi)
gmove(f, &tlo)
gins(x86.AMOVL, ncon(0), &thi)
splitclean()
return
}
gins(a, f, t)
return
// requires register source
rsrc:
gc.Regalloc(&r1, f.Type, t)
gmove(f, &r1)
gins(a, &r1, t)
gc.Regfree(&r1)
return
// requires register destination
rdst:
{
gc.Regalloc(&r1, t.Type, t)
gins(a, f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
// requires register intermediate
hard:
gc.Regalloc(&r1, cvt, t)
gmove(f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
func floatmove_sse(f *gc.Node, t *gc.Node) {
var r1 gc.Node
var cvt *gc.Type
var a int
ft := gc.Simsimtype(f.Type)
tt := gc.Simsimtype(t.Type)
switch uint32(ft)<<16 | uint32(tt) {
// should not happen
default:
gc.Fatalf("gmove %v -> %v", f, t)
return
// convert via int32.
/*
* float to integer
*/
case gc.TFLOAT32<<16 | gc.TINT16,
gc.TFLOAT32<<16 | gc.TINT8,
gc.TFLOAT32<<16 | gc.TUINT16,
gc.TFLOAT32<<16 | gc.TUINT8,
gc.TFLOAT64<<16 | gc.TINT16,
gc.TFLOAT64<<16 | gc.TINT8,
gc.TFLOAT64<<16 | gc.TUINT16,
gc.TFLOAT64<<16 | gc.TUINT8:
cvt = gc.Types[gc.TINT32]
goto hard
// convert via int64.
case gc.TFLOAT32<<16 | gc.TUINT32,
gc.TFLOAT64<<16 | gc.TUINT32:
cvt = gc.Types[gc.TINT64]
goto hardmem
case gc.TFLOAT32<<16 | gc.TINT32:
a = x86.ACVTTSS2SL
goto rdst
case gc.TFLOAT64<<16 | gc.TINT32:
a = x86.ACVTTSD2SL
goto rdst
// convert via int32 memory
/*
* integer to float
*/
case gc.TINT8<<16 | gc.TFLOAT32,
gc.TINT8<<16 | gc.TFLOAT64,
gc.TINT16<<16 | gc.TFLOAT32,
gc.TINT16<<16 | gc.TFLOAT64,
gc.TUINT16<<16 | gc.TFLOAT32,
gc.TUINT16<<16 | gc.TFLOAT64,
gc.TUINT8<<16 | gc.TFLOAT32,
gc.TUINT8<<16 | gc.TFLOAT64:
cvt = gc.Types[gc.TINT32]
goto hard
// convert via int64 memory
case gc.TUINT32<<16 | gc.TFLOAT32,
gc.TUINT32<<16 | gc.TFLOAT64:
cvt = gc.Types[gc.TINT64]
goto hardmem
case gc.TINT32<<16 | gc.TFLOAT32:
a = x86.ACVTSL2SS
goto rdst
case gc.TINT32<<16 | gc.TFLOAT64:
a = x86.ACVTSL2SD
goto rdst
/*
* float to float
*/
case gc.TFLOAT32<<16 | gc.TFLOAT32:
a = x86.AMOVSS
case gc.TFLOAT64<<16 | gc.TFLOAT64:
a = x86.AMOVSD
case gc.TFLOAT32<<16 | gc.TFLOAT64:
a = x86.ACVTSS2SD
goto rdst
case gc.TFLOAT64<<16 | gc.TFLOAT32:
a = x86.ACVTSD2SS
goto rdst
}
gins(a, f, t)
return
// requires register intermediate
hard:
gc.Regalloc(&r1, cvt, t)
gmove(f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
// requires memory intermediate
hardmem:
gc.Tempname(&r1, cvt)
gmove(f, &r1)
gmove(&r1, t)
return
// requires register destination
rdst:
gc.Regalloc(&r1, t.Type, t)
gins(a, f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
func floatmove_387(f *gc.Node, t *gc.Node) {
var r1 gc.Node
var a int
ft := gc.Simsimtype(f.Type)
tt := gc.Simsimtype(t.Type)
cvt := t.Type
switch uint32(ft)<<16 | uint32(tt) {
default:
goto fatal
/*
* float to integer
*/
case gc.TFLOAT32<<16 | gc.TINT16,
gc.TFLOAT32<<16 | gc.TINT32,
gc.TFLOAT32<<16 | gc.TINT64,
gc.TFLOAT64<<16 | gc.TINT16,
gc.TFLOAT64<<16 | gc.TINT32,
gc.TFLOAT64<<16 | gc.TINT64:
if t.Op == gc.OREGISTER {
goto hardmem
}
var r1 gc.Node
gc.Nodreg(&r1, gc.Types[ft], x86.REG_F0)
if f.Op != gc.OREGISTER {
if ft == gc.TFLOAT32 {
gins(x86.AFMOVF, f, &r1)
} else {
gins(x86.AFMOVD, f, &r1)
}
}
// set round to zero mode during conversion
var t1 gc.Node
memname(&t1, gc.Types[gc.TUINT16])
var t2 gc.Node
memname(&t2, gc.Types[gc.TUINT16])
gins(x86.AFSTCW, nil, &t1)
gins(x86.AMOVW, ncon(0xf7f), &t2)
gins(x86.AFLDCW, &t2, nil)
if tt == gc.TINT16 {
gins(x86.AFMOVWP, &r1, t)
} else if tt == gc.TINT32 {
gins(x86.AFMOVLP, &r1, t)
} else {
gins(x86.AFMOVVP, &r1, t)
}
gins(x86.AFLDCW, &t1, nil)
return
// convert via int32.
case gc.TFLOAT32<<16 | gc.TINT8,
gc.TFLOAT32<<16 | gc.TUINT16,
gc.TFLOAT32<<16 | gc.TUINT8,
gc.TFLOAT64<<16 | gc.TINT8,
gc.TFLOAT64<<16 | gc.TUINT16,
gc.TFLOAT64<<16 | gc.TUINT8:
var t1 gc.Node
gc.Tempname(&t1, gc.Types[gc.TINT32])
gmove(f, &t1)
switch tt {
default:
gc.Fatalf("gmove %v", t)
case gc.TINT8:
gins(x86.ACMPL, &t1, ncon(-0x80&(1<<32-1)))
p1 := gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TINT32]), nil, -1)
gins(x86.ACMPL, &t1, ncon(0x7f))
p2 := gc.Gbranch(optoas(gc.OGT, gc.Types[gc.TINT32]), nil, -1)
p3 := gc.Gbranch(obj.AJMP, nil, 0)
gc.Patch(p1, gc.Pc)
gc.Patch(p2, gc.Pc)
gmove(ncon(-0x80&(1<<32-1)), &t1)
gc.Patch(p3, gc.Pc)
gmove(&t1, t)
case gc.TUINT8:
gins(x86.ATESTL, ncon(0xffffff00), &t1)
p1 := gc.Gbranch(x86.AJEQ, nil, +1)
gins(x86.AMOVL, ncon(0), &t1)
gc.Patch(p1, gc.Pc)
gmove(&t1, t)
case gc.TUINT16:
gins(x86.ATESTL, ncon(0xffff0000), &t1)
p1 := gc.Gbranch(x86.AJEQ, nil, +1)
gins(x86.AMOVL, ncon(0), &t1)
gc.Patch(p1, gc.Pc)
gmove(&t1, t)
}
return
// convert via int64.
case gc.TFLOAT32<<16 | gc.TUINT32,
gc.TFLOAT64<<16 | gc.TUINT32:
cvt = gc.Types[gc.TINT64]
goto hardmem
/*
* integer to float
*/
case gc.TINT16<<16 | gc.TFLOAT32,
gc.TINT16<<16 | gc.TFLOAT64,
gc.TINT32<<16 | gc.TFLOAT32,
gc.TINT32<<16 | gc.TFLOAT64,
gc.TINT64<<16 | gc.TFLOAT32,
gc.TINT64<<16 | gc.TFLOAT64:
if t.Op != gc.OREGISTER {
goto hard
}
if f.Op == gc.OREGISTER {
cvt = f.Type
goto hardmem
}
switch ft {
case gc.TINT16:
a = x86.AFMOVW
case gc.TINT32:
a = x86.AFMOVL
default:
a = x86.AFMOVV
}
// convert via int32 memory
case gc.TINT8<<16 | gc.TFLOAT32,
gc.TINT8<<16 | gc.TFLOAT64,
gc.TUINT16<<16 | gc.TFLOAT32,
gc.TUINT16<<16 | gc.TFLOAT64,
gc.TUINT8<<16 | gc.TFLOAT32,
gc.TUINT8<<16 | gc.TFLOAT64:
cvt = gc.Types[gc.TINT32]
goto hardmem
// convert via int64 memory
case gc.TUINT32<<16 | gc.TFLOAT32,
gc.TUINT32<<16 | gc.TFLOAT64:
cvt = gc.Types[gc.TINT64]
goto hardmem
// The way the code generator uses floating-point
// registers, a move from F0 to F0 is intended as a no-op.
// On the x86, it's not: it pushes a second copy of F0
// on the floating point stack. So toss it away here.
// Also, F0 is the *only* register we ever evaluate
// into, so we should only see register/register as F0/F0.
/*
* float to float
*/
case gc.TFLOAT32<<16 | gc.TFLOAT32,
gc.TFLOAT64<<16 | gc.TFLOAT64:
if gc.Ismem(f) && gc.Ismem(t) {
goto hard
}
if f.Op == gc.OREGISTER && t.Op == gc.OREGISTER {
if f.Reg != x86.REG_F0 || t.Reg != x86.REG_F0 {
goto fatal
}
return
}
a = x86.AFMOVF
if ft == gc.TFLOAT64 {
a = x86.AFMOVD
}
if gc.Ismem(t) {
if f.Op != gc.OREGISTER || f.Reg != x86.REG_F0 {
gc.Fatalf("gmove %v", f)
}
a = x86.AFMOVFP
if ft == gc.TFLOAT64 {
a = x86.AFMOVDP
}
}
case gc.TFLOAT32<<16 | gc.TFLOAT64:
if gc.Ismem(f) && gc.Ismem(t) {
goto hard
}
if f.Op == gc.OREGISTER && t.Op == gc.OREGISTER {
if f.Reg != x86.REG_F0 || t.Reg != x86.REG_F0 {
goto fatal
}
return
}
if f.Op == gc.OREGISTER {
gins(x86.AFMOVDP, f, t)
} else {
gins(x86.AFMOVF, f, t)
}
return
case gc.TFLOAT64<<16 | gc.TFLOAT32:
if gc.Ismem(f) && gc.Ismem(t) {
goto hard
}
if f.Op == gc.OREGISTER && t.Op == gc.OREGISTER {
var r1 gc.Node
gc.Tempname(&r1, gc.Types[gc.TFLOAT32])
gins(x86.AFMOVFP, f, &r1)
gins(x86.AFMOVF, &r1, t)
return
}
if f.Op == gc.OREGISTER {
gins(x86.AFMOVFP, f, t)
} else {
gins(x86.AFMOVD, f, t)
}
return
}
gins(a, f, t)
return
// requires register intermediate
hard:
gc.Regalloc(&r1, cvt, t)
gmove(f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
// requires memory intermediate
hardmem:
gc.Tempname(&r1, cvt)
gmove(f, &r1)
gmove(&r1, t)
return
// should not happen
fatal:
gc.Fatalf("gmove %v -> %v", gc.Nconv(f, obj.FmtLong), gc.Nconv(t, obj.FmtLong))
return
}
func floatmove(f *gc.Node, t *gc.Node) {
var r1 gc.Node
ft := gc.Simsimtype(f.Type)
tt := gc.Simsimtype(t.Type)
cvt := t.Type
// cannot have two floating point memory operands.
if gc.Isfloat[ft] && gc.Isfloat[tt] && gc.Ismem(f) && gc.Ismem(t) {
goto hard
}
// convert constant to desired type
if f.Op == gc.OLITERAL {
var con gc.Node
f.Convconst(&con, t.Type)
f = &con
ft = gc.Simsimtype(con.Type)
// some constants can't move directly to memory.
if gc.Ismem(t) {
// float constants come from memory.
if gc.Isfloat[tt] {
goto hard
}
}
}
// value -> value copy, only one memory operand.
// figure out the instruction to use.
// break out of switch for one-instruction gins.
// goto rdst for "destination must be register".
// goto hard for "convert to cvt type first".
// otherwise handle and return.
switch uint32(ft)<<16 | uint32(tt) {
default:
if gc.Thearch.Use387 {
floatmove_387(f, t)
} else {
floatmove_sse(f, t)
}
return
// float to very long integer.
case gc.TFLOAT32<<16 | gc.TINT64,
gc.TFLOAT64<<16 | gc.TINT64:
if f.Op == gc.OREGISTER {
cvt = f.Type
goto hardmem
}
var r1 gc.Node
gc.Nodreg(&r1, gc.Types[ft], x86.REG_F0)
if ft == gc.TFLOAT32 {
gins(x86.AFMOVF, f, &r1)
} else {
gins(x86.AFMOVD, f, &r1)
}
// set round to zero mode during conversion
var t1 gc.Node
memname(&t1, gc.Types[gc.TUINT16])
var t2 gc.Node
memname(&t2, gc.Types[gc.TUINT16])
gins(x86.AFSTCW, nil, &t1)
gins(x86.AMOVW, ncon(0xf7f), &t2)
gins(x86.AFLDCW, &t2, nil)
if tt == gc.TINT16 {
gins(x86.AFMOVWP, &r1, t)
} else if tt == gc.TINT32 {
gins(x86.AFMOVLP, &r1, t)
} else {
gins(x86.AFMOVVP, &r1, t)
}
gins(x86.AFLDCW, &t1, nil)
return
case gc.TFLOAT32<<16 | gc.TUINT64,
gc.TFLOAT64<<16 | gc.TUINT64:
if !gc.Ismem(f) {
cvt = f.Type
goto hardmem
}
bignodes()
var f0 gc.Node
gc.Nodreg(&f0, gc.Types[ft], x86.REG_F0)
var f1 gc.Node
gc.Nodreg(&f1, gc.Types[ft], x86.REG_F0+1)
var ax gc.Node
gc.Nodreg(&ax, gc.Types[gc.TUINT16], x86.REG_AX)
if ft == gc.TFLOAT32 {
gins(x86.AFMOVF, f, &f0)
} else {
gins(x86.AFMOVD, f, &f0)
}
// if 0 > v { answer = 0 }
gins(x86.AFMOVD, &zerof, &f0)
gins(x86.AFUCOMP, &f0, &f1)
gins(x86.AFSTSW, nil, &ax)
gins(x86.ASAHF, nil, nil)
p1 := gc.Gbranch(optoas(gc.OGT, gc.Types[tt]), nil, 0)
// if 1<<64 <= v { answer = 0 too }
gins(x86.AFMOVD, &two64f, &f0)
gins(x86.AFUCOMP, &f0, &f1)
gins(x86.AFSTSW, nil, &ax)
gins(x86.ASAHF, nil, nil)
p2 := gc.Gbranch(optoas(gc.OGT, gc.Types[tt]), nil, 0)
gc.Patch(p1, gc.Pc)
gins(x86.AFMOVVP, &f0, t) // don't care about t, but will pop the stack
var thi gc.Node
var tlo gc.Node
split64(t, &tlo, &thi)
gins(x86.AMOVL, ncon(0), &tlo)
gins(x86.AMOVL, ncon(0), &thi)
splitclean()
p1 = gc.Gbranch(obj.AJMP, nil, 0)
gc.Patch(p2, gc.Pc)
// in range; algorithm is:
// if small enough, use native float64 -> int64 conversion.
// otherwise, subtract 2^63, convert, and add it back.
// set round to zero mode during conversion
var t1 gc.Node
memname(&t1, gc.Types[gc.TUINT16])
var t2 gc.Node
memname(&t2, gc.Types[gc.TUINT16])
gins(x86.AFSTCW, nil, &t1)
gins(x86.AMOVW, ncon(0xf7f), &t2)
gins(x86.AFLDCW, &t2, nil)
// actual work
gins(x86.AFMOVD, &two63f, &f0)
gins(x86.AFUCOMP, &f0, &f1)
gins(x86.AFSTSW, nil, &ax)
gins(x86.ASAHF, nil, nil)
p2 = gc.Gbranch(optoas(gc.OLE, gc.Types[tt]), nil, 0)
gins(x86.AFMOVVP, &f0, t)
p3 := gc.Gbranch(obj.AJMP, nil, 0)
gc.Patch(p2, gc.Pc)
gins(x86.AFMOVD, &two63f, &f0)
gins(x86.AFSUBDP, &f0, &f1)
gins(x86.AFMOVVP, &f0, t)
split64(t, &tlo, &thi)
gins(x86.AXORL, ncon(0x80000000), &thi) // + 2^63
gc.Patch(p3, gc.Pc)
splitclean()
// restore rounding mode
gins(x86.AFLDCW, &t1, nil)
gc.Patch(p1, gc.Pc)
return
/*
* integer to float
*/
case gc.TINT64<<16 | gc.TFLOAT32,
gc.TINT64<<16 | gc.TFLOAT64:
if t.Op == gc.OREGISTER {
goto hardmem
}
var f0 gc.Node
gc.Nodreg(&f0, t.Type, x86.REG_F0)
gins(x86.AFMOVV, f, &f0)
if tt == gc.TFLOAT32 {
gins(x86.AFMOVFP, &f0, t)
} else {
gins(x86.AFMOVDP, &f0, t)
}
return
// algorithm is:
// if small enough, use native int64 -> float64 conversion.
// otherwise, halve (rounding to odd?), convert, and double.
case gc.TUINT64<<16 | gc.TFLOAT32,
gc.TUINT64<<16 | gc.TFLOAT64:
var ax gc.Node
gc.Nodreg(&ax, gc.Types[gc.TUINT32], x86.REG_AX)
var dx gc.Node
gc.Nodreg(&dx, gc.Types[gc.TUINT32], x86.REG_DX)
var cx gc.Node
gc.Nodreg(&cx, gc.Types[gc.TUINT32], x86.REG_CX)
var t1 gc.Node
gc.Tempname(&t1, f.Type)
var tlo gc.Node
var thi gc.Node
split64(&t1, &tlo, &thi)
gmove(f, &t1)
gins(x86.ACMPL, &thi, ncon(0))
p1 := gc.Gbranch(x86.AJLT, nil, 0)
// native
var r1 gc.Node
gc.Nodreg(&r1, gc.Types[tt], x86.REG_F0)
gins(x86.AFMOVV, &t1, &r1)
if tt == gc.TFLOAT32 {
gins(x86.AFMOVFP, &r1, t)
} else {
gins(x86.AFMOVDP, &r1, t)
}
p2 := gc.Gbranch(obj.AJMP, nil, 0)
// simulated
gc.Patch(p1, gc.Pc)
gmove(&tlo, &ax)
gmove(&thi, &dx)
p1 = gins(x86.ASHRL, ncon(1), &ax)
p1.From.Index = x86.REG_DX // double-width shift DX -> AX
p1.From.Scale = 0
gins(x86.AMOVL, ncon(0), &cx)
gins(x86.ASETCC, nil, &cx)
gins(x86.AORL, &cx, &ax)
gins(x86.ASHRL, ncon(1), &dx)
gmove(&dx, &thi)
gmove(&ax, &tlo)
gc.Nodreg(&r1, gc.Types[tt], x86.REG_F0)
var r2 gc.Node
gc.Nodreg(&r2, gc.Types[tt], x86.REG_F0+1)
gins(x86.AFMOVV, &t1, &r1)
gins(x86.AFMOVD, &r1, &r1)
gins(x86.AFADDDP, &r1, &r2)
if tt == gc.TFLOAT32 {
gins(x86.AFMOVFP, &r1, t)
} else {
gins(x86.AFMOVDP, &r1, t)
}
gc.Patch(p2, gc.Pc)
splitclean()
return
}
// requires register intermediate
hard:
gc.Regalloc(&r1, cvt, t)
gmove(f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
// requires memory intermediate
hardmem:
gc.Tempname(&r1, cvt)
gmove(f, &r1)
gmove(&r1, t)
return
}
func bgen_float(n *gc.Node, wantTrue bool, likely int, to *obj.Prog) {
nl := n.Left
nr := n.Right
op := n.Op
if !wantTrue {
// brcom is not valid on floats when NaN is involved.
p1 := gc.Gbranch(obj.AJMP, nil, 0)
p2 := gc.Gbranch(obj.AJMP, nil, 0)
gc.Patch(p1, gc.Pc)
// No need to avoid re-genning ninit.
bgen_float(n, true, -likely, p2)
gc.Patch(gc.Gbranch(obj.AJMP, nil, 0), to)
gc.Patch(p2, gc.Pc)
return
}
if gc.Thearch.Use387 {
op = gc.Brrev(op) // because the args are stacked
if op == gc.OGE || op == gc.OGT {
// only < and <= work right with NaN; reverse if needed
nl, nr = nr, nl
op = gc.Brrev(op)
}
var ax, n2, tmp gc.Node
gc.Nodreg(&tmp, nr.Type, x86.REG_F0)
gc.Nodreg(&n2, nr.Type, x86.REG_F0+1)
gc.Nodreg(&ax, gc.Types[gc.TUINT16], x86.REG_AX)
if gc.Simsimtype(nr.Type) == gc.TFLOAT64 {
if nl.Ullman > nr.Ullman {
gc.Cgen(nl, &tmp)
gc.Cgen(nr, &tmp)
gins(x86.AFXCHD, &tmp, &n2)
} else {
gc.Cgen(nr, &tmp)
gc.Cgen(nl, &tmp)
}
gins(x86.AFUCOMPP, &tmp, &n2)
} else {
// TODO(rsc): The moves back and forth to memory
// here are for truncating the value to 32 bits.
// This handles 32-bit comparison but presumably
// all the other ops have the same problem.
// We need to figure out what the right general
// solution is, besides telling people to use float64.
var t1 gc.Node
gc.Tempname(&t1, gc.Types[gc.TFLOAT32])
var t2 gc.Node
gc.Tempname(&t2, gc.Types[gc.TFLOAT32])
gc.Cgen(nr, &t1)
gc.Cgen(nl, &t2)
gmove(&t2, &tmp)
gins(x86.AFCOMFP, &t1, &tmp)
}
gins(x86.AFSTSW, nil, &ax)
gins(x86.ASAHF, nil, nil)
} else {
// Not 387
if !nl.Addable {
nl = gc.CgenTemp(nl)
}
if !nr.Addable {
nr = gc.CgenTemp(nr)
}
var n2 gc.Node
gc.Regalloc(&n2, nr.Type, nil)
gmove(nr, &n2)
nr = &n2
if nl.Op != gc.OREGISTER {
var n3 gc.Node
gc.Regalloc(&n3, nl.Type, nil)
gmove(nl, &n3)
nl = &n3
}
if op == gc.OGE || op == gc.OGT {
// only < and <= work right with NopN; reverse if needed
nl, nr = nr, nl
op = gc.Brrev(op)
}
gins(foptoas(gc.OCMP, nr.Type, 0), nl, nr)
if nl.Op == gc.OREGISTER {
gc.Regfree(nl)
}
gc.Regfree(nr)
}
switch op {
case gc.OEQ:
// neither NE nor P
p1 := gc.Gbranch(x86.AJNE, nil, -likely)
p2 := gc.Gbranch(x86.AJPS, nil, -likely)
gc.Patch(gc.Gbranch(obj.AJMP, nil, 0), to)
gc.Patch(p1, gc.Pc)
gc.Patch(p2, gc.Pc)
case gc.ONE:
// either NE or P
gc.Patch(gc.Gbranch(x86.AJNE, nil, likely), to)
gc.Patch(gc.Gbranch(x86.AJPS, nil, likely), to)
default:
gc.Patch(gc.Gbranch(optoas(op, nr.Type), nil, likely), to)
}
}
func gmove(f *gc.Node, t *gc.Node) {
if gc.Debug['M'] != 0 {
fmt.Printf("gmove %v -> %v\n", f, t)
}
ft := gc.Simsimtype(f.Type)
tt := gc.Simsimtype(t.Type)
cvt := t.Type
if gc.Iscomplex[ft] || gc.Iscomplex[tt] {
gc.Complexmove(f, t)
return
}
// cannot have two memory operands;
// except 64-bit, which always copies via registers anyway.
var a int
var r1 gc.Node
if !gc.Is64(f.Type) && !gc.Is64(t.Type) && gc.Ismem(f) && gc.Ismem(t) {
goto hard
}
// convert constant to desired type
if f.Op == gc.OLITERAL {
var con gc.Node
switch tt {
default:
f.Convconst(&con, t.Type)
case gc.TINT16,
gc.TINT8:
var con gc.Node
f.Convconst(&con, gc.Types[gc.TINT32])
var r1 gc.Node
gc.Regalloc(&r1, con.Type, t)
gins(arm.AMOVW, &con, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
case gc.TUINT16,
gc.TUINT8:
var con gc.Node
f.Convconst(&con, gc.Types[gc.TUINT32])
var r1 gc.Node
gc.Regalloc(&r1, con.Type, t)
gins(arm.AMOVW, &con, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
f = &con
ft = gc.Simsimtype(con.Type)
// constants can't move directly to memory
if gc.Ismem(t) && !gc.Is64(t.Type) {
goto hard
}
}
// value -> value copy, only one memory operand.
// figure out the instruction to use.
// break out of switch for one-instruction gins.
// goto rdst for "destination must be register".
// goto hard for "convert to cvt type first".
// otherwise handle and return.
switch uint32(ft)<<16 | uint32(tt) {
default:
// should not happen
gc.Fatal("gmove %v -> %v", f, t)
return
/*
* integer copy and truncate
*/
case gc.TINT8<<16 | gc.TINT8: // same size
if !gc.Ismem(f) {
a = arm.AMOVB
break
}
fallthrough
case gc.TUINT8<<16 | gc.TINT8,
gc.TINT16<<16 | gc.TINT8, // truncate
gc.TUINT16<<16 | gc.TINT8,
gc.TINT32<<16 | gc.TINT8,
gc.TUINT32<<16 | gc.TINT8:
a = arm.AMOVBS
case gc.TUINT8<<16 | gc.TUINT8:
if !gc.Ismem(f) {
a = arm.AMOVB
break
}
fallthrough
case gc.TINT8<<16 | gc.TUINT8,
gc.TINT16<<16 | gc.TUINT8,
gc.TUINT16<<16 | gc.TUINT8,
gc.TINT32<<16 | gc.TUINT8,
gc.TUINT32<<16 | gc.TUINT8:
a = arm.AMOVBU
case gc.TINT64<<16 | gc.TINT8, // truncate low word
gc.TUINT64<<16 | gc.TINT8:
a = arm.AMOVBS
goto trunc64
case gc.TINT64<<16 | gc.TUINT8,
gc.TUINT64<<16 | gc.TUINT8:
a = arm.AMOVBU
goto trunc64
case gc.TINT16<<16 | gc.TINT16: // same size
if !gc.Ismem(f) {
a = arm.AMOVH
break
}
fallthrough
case gc.TUINT16<<16 | gc.TINT16,
gc.TINT32<<16 | gc.TINT16, // truncate
gc.TUINT32<<16 | gc.TINT16:
a = arm.AMOVHS
case gc.TUINT16<<16 | gc.TUINT16:
if !gc.Ismem(f) {
a = arm.AMOVH
break
}
fallthrough
case gc.TINT16<<16 | gc.TUINT16,
gc.TINT32<<16 | gc.TUINT16,
gc.TUINT32<<16 | gc.TUINT16:
a = arm.AMOVHU
case gc.TINT64<<16 | gc.TINT16, // truncate low word
gc.TUINT64<<16 | gc.TINT16:
a = arm.AMOVHS
goto trunc64
case gc.TINT64<<16 | gc.TUINT16,
gc.TUINT64<<16 | gc.TUINT16:
a = arm.AMOVHU
goto trunc64
case gc.TINT32<<16 | gc.TINT32, // same size
gc.TINT32<<16 | gc.TUINT32,
gc.TUINT32<<16 | gc.TINT32,
gc.TUINT32<<16 | gc.TUINT32:
a = arm.AMOVW
case gc.TINT64<<16 | gc.TINT32, // truncate
gc.TUINT64<<16 | gc.TINT32,
gc.TINT64<<16 | gc.TUINT32,
gc.TUINT64<<16 | gc.TUINT32:
var flo gc.Node
var fhi gc.Node
split64(f, &flo, &fhi)
var r1 gc.Node
gc.Regalloc(&r1, t.Type, nil)
gins(arm.AMOVW, &flo, &r1)
gins(arm.AMOVW, &r1, t)
gc.Regfree(&r1)
splitclean()
return
case gc.TINT64<<16 | gc.TINT64, // same size
gc.TINT64<<16 | gc.TUINT64,
gc.TUINT64<<16 | gc.TINT64,
gc.TUINT64<<16 | gc.TUINT64:
var fhi gc.Node
var flo gc.Node
split64(f, &flo, &fhi)
var tlo gc.Node
var thi gc.Node
split64(t, &tlo, &thi)
var r1 gc.Node
gc.Regalloc(&r1, flo.Type, nil)
var r2 gc.Node
gc.Regalloc(&r2, fhi.Type, nil)
gins(arm.AMOVW, &flo, &r1)
gins(arm.AMOVW, &fhi, &r2)
gins(arm.AMOVW, &r1, &tlo)
gins(arm.AMOVW, &r2, &thi)
gc.Regfree(&r1)
gc.Regfree(&r2)
splitclean()
splitclean()
return
/*
* integer up-conversions
*/
case gc.TINT8<<16 | gc.TINT16, // sign extend int8
gc.TINT8<<16 | gc.TUINT16,
gc.TINT8<<16 | gc.TINT32,
gc.TINT8<<16 | gc.TUINT32:
a = arm.AMOVBS
goto rdst
case gc.TINT8<<16 | gc.TINT64, // convert via int32
gc.TINT8<<16 | gc.TUINT64:
cvt = gc.Types[gc.TINT32]
goto hard
case gc.TUINT8<<16 | gc.TINT16, // zero extend uint8
gc.TUINT8<<16 | gc.TUINT16,
gc.TUINT8<<16 | gc.TINT32,
gc.TUINT8<<16 | gc.TUINT32:
a = arm.AMOVBU
goto rdst
case gc.TUINT8<<16 | gc.TINT64, // convert via uint32
gc.TUINT8<<16 | gc.TUINT64:
cvt = gc.Types[gc.TUINT32]
goto hard
case gc.TINT16<<16 | gc.TINT32, // sign extend int16
gc.TINT16<<16 | gc.TUINT32:
a = arm.AMOVHS
goto rdst
case gc.TINT16<<16 | gc.TINT64, // convert via int32
gc.TINT16<<16 | gc.TUINT64:
cvt = gc.Types[gc.TINT32]
goto hard
case gc.TUINT16<<16 | gc.TINT32, // zero extend uint16
gc.TUINT16<<16 | gc.TUINT32:
a = arm.AMOVHU
goto rdst
case gc.TUINT16<<16 | gc.TINT64, // convert via uint32
gc.TUINT16<<16 | gc.TUINT64:
cvt = gc.Types[gc.TUINT32]
goto hard
case gc.TINT32<<16 | gc.TINT64, // sign extend int32
gc.TINT32<<16 | gc.TUINT64:
var tlo gc.Node
var thi gc.Node
split64(t, &tlo, &thi)
var r1 gc.Node
gc.Regalloc(&r1, tlo.Type, nil)
var r2 gc.Node
gc.Regalloc(&r2, thi.Type, nil)
gmove(f, &r1)
p1 := gins(arm.AMOVW, &r1, &r2)
p1.From.Type = obj.TYPE_SHIFT
p1.From.Offset = 2<<5 | 31<<7 | int64(r1.Reg)&15 // r1->31
p1.From.Reg = 0
//print("gmove: %v\n", p1);
gins(arm.AMOVW, &r1, &tlo)
gins(arm.AMOVW, &r2, &thi)
gc.Regfree(&r1)
gc.Regfree(&r2)
splitclean()
return
case gc.TUINT32<<16 | gc.TINT64, // zero extend uint32
gc.TUINT32<<16 | gc.TUINT64:
var thi gc.Node
var tlo gc.Node
split64(t, &tlo, &thi)
gmove(f, &tlo)
var r1 gc.Node
gc.Regalloc(&r1, thi.Type, nil)
gins(arm.AMOVW, ncon(0), &r1)
gins(arm.AMOVW, &r1, &thi)
gc.Regfree(&r1)
splitclean()
return
// case CASE(TFLOAT64, TUINT64):
/*
* float to integer
*/
case gc.TFLOAT32<<16 | gc.TINT8,
gc.TFLOAT32<<16 | gc.TUINT8,
gc.TFLOAT32<<16 | gc.TINT16,
gc.TFLOAT32<<16 | gc.TUINT16,
gc.TFLOAT32<<16 | gc.TINT32,
gc.TFLOAT32<<16 | gc.TUINT32,
// case CASE(TFLOAT32, TUINT64):
gc.TFLOAT64<<16 | gc.TINT8,
gc.TFLOAT64<<16 | gc.TUINT8,
gc.TFLOAT64<<16 | gc.TINT16,
gc.TFLOAT64<<16 | gc.TUINT16,
gc.TFLOAT64<<16 | gc.TINT32,
gc.TFLOAT64<<16 | gc.TUINT32:
fa := arm.AMOVF
a := arm.AMOVFW
if ft == gc.TFLOAT64 {
fa = arm.AMOVD
a = arm.AMOVDW
}
ta := arm.AMOVW
switch tt {
case gc.TINT8:
ta = arm.AMOVBS
case gc.TUINT8:
ta = arm.AMOVBU
case gc.TINT16:
ta = arm.AMOVHS
case gc.TUINT16:
ta = arm.AMOVHU
}
var r1 gc.Node
gc.Regalloc(&r1, gc.Types[ft], f)
var r2 gc.Node
gc.Regalloc(&r2, gc.Types[tt], t)
gins(fa, f, &r1) // load to fpu
p1 := gins(a, &r1, &r1) // convert to w
switch tt {
case gc.TUINT8,
gc.TUINT16,
gc.TUINT32:
p1.Scond |= arm.C_UBIT
}
gins(arm.AMOVW, &r1, &r2) // copy to cpu
gins(ta, &r2, t) // store
gc.Regfree(&r1)
gc.Regfree(&r2)
return
/*
* integer to float
*/
case gc.TINT8<<16 | gc.TFLOAT32,
gc.TUINT8<<16 | gc.TFLOAT32,
gc.TINT16<<16 | gc.TFLOAT32,
gc.TUINT16<<16 | gc.TFLOAT32,
gc.TINT32<<16 | gc.TFLOAT32,
gc.TUINT32<<16 | gc.TFLOAT32,
gc.TINT8<<16 | gc.TFLOAT64,
gc.TUINT8<<16 | gc.TFLOAT64,
gc.TINT16<<16 | gc.TFLOAT64,
gc.TUINT16<<16 | gc.TFLOAT64,
gc.TINT32<<16 | gc.TFLOAT64,
gc.TUINT32<<16 | gc.TFLOAT64:
fa := arm.AMOVW
switch ft {
case gc.TINT8:
fa = arm.AMOVBS
case gc.TUINT8:
fa = arm.AMOVBU
case gc.TINT16:
fa = arm.AMOVHS
case gc.TUINT16:
fa = arm.AMOVHU
}
a := arm.AMOVWF
ta := arm.AMOVF
if tt == gc.TFLOAT64 {
a = arm.AMOVWD
ta = arm.AMOVD
}
var r1 gc.Node
gc.Regalloc(&r1, gc.Types[ft], f)
var r2 gc.Node
gc.Regalloc(&r2, gc.Types[tt], t)
gins(fa, f, &r1) // load to cpu
gins(arm.AMOVW, &r1, &r2) // copy to fpu
p1 := gins(a, &r2, &r2) // convert
switch ft {
case gc.TUINT8,
gc.TUINT16,
gc.TUINT32:
p1.Scond |= arm.C_UBIT
}
gins(ta, &r2, t) // store
gc.Regfree(&r1)
gc.Regfree(&r2)
return
case gc.TUINT64<<16 | gc.TFLOAT32,
gc.TUINT64<<16 | gc.TFLOAT64:
gc.Fatal("gmove UINT64, TFLOAT not implemented")
return
/*
* float to float
*/
case gc.TFLOAT32<<16 | gc.TFLOAT32:
a = arm.AMOVF
case gc.TFLOAT64<<16 | gc.TFLOAT64:
a = arm.AMOVD
case gc.TFLOAT32<<16 | gc.TFLOAT64:
var r1 gc.Node
gc.Regalloc(&r1, gc.Types[gc.TFLOAT64], t)
gins(arm.AMOVF, f, &r1)
gins(arm.AMOVFD, &r1, &r1)
gins(arm.AMOVD, &r1, t)
gc.Regfree(&r1)
return
case gc.TFLOAT64<<16 | gc.TFLOAT32:
var r1 gc.Node
gc.Regalloc(&r1, gc.Types[gc.TFLOAT64], t)
gins(arm.AMOVD, f, &r1)
gins(arm.AMOVDF, &r1, &r1)
gins(arm.AMOVF, &r1, t)
gc.Regfree(&r1)
return
}
gins(a, f, t)
return
// TODO(kaib): we almost always require a register dest anyway, this can probably be
// removed.
// requires register destination
rdst:
{
gc.Regalloc(&r1, t.Type, t)
gins(a, f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
// requires register intermediate
hard:
gc.Regalloc(&r1, cvt, t)
gmove(f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
// truncate 64 bit integer
trunc64:
var fhi gc.Node
var flo gc.Node
split64(f, &flo, &fhi)
gc.Regalloc(&r1, t.Type, nil)
gins(a, &flo, &r1)
gins(a, &r1, t)
gc.Regfree(&r1)
splitclean()
return
}
/*
* generate move:
* t = f
* hard part is conversions.
*/
func gmove(f *gc.Node, t *gc.Node) {
if gc.Debug['M'] != 0 {
fmt.Printf("gmove %v -> %v\n", gc.Nconv(f, obj.FmtLong), gc.Nconv(t, obj.FmtLong))
}
ft := gc.Simsimtype(f.Type)
tt := gc.Simsimtype(t.Type)
cvt := t.Type
if gc.Iscomplex[ft] || gc.Iscomplex[tt] {
gc.Complexmove(f, t)
return
}
// cannot have two memory operands
var a int
if gc.Ismem(f) && gc.Ismem(t) {
goto hard
}
// convert constant to desired type
if f.Op == gc.OLITERAL {
var con gc.Node
f.Convconst(&con, t.Type)
f = &con
ft = tt // so big switch will choose a simple mov
// some constants can't move directly to memory.
if gc.Ismem(t) {
// float constants come from memory.
if gc.Isfloat[tt] {
goto hard
}
// 64-bit immediates are really 32-bit sign-extended
// unless moving into a register.
if gc.Isint[tt] {
if i := con.Int(); int64(int32(i)) != i {
goto hard
}
}
}
}
// value -> value copy, only one memory operand.
// figure out the instruction to use.
// break out of switch for one-instruction gins.
// goto rdst for "destination must be register".
// goto hard for "convert to cvt type first".
// otherwise handle and return.
switch uint32(ft)<<16 | uint32(tt) {
default:
gc.Fatal("gmove %v -> %v", gc.Tconv(f.Type, obj.FmtLong), gc.Tconv(t.Type, obj.FmtLong))
/*
* integer copy and truncate
*/
case gc.TINT8<<16 | gc.TINT8, // same size
gc.TINT8<<16 | gc.TUINT8,
gc.TUINT8<<16 | gc.TINT8,
gc.TUINT8<<16 | gc.TUINT8,
gc.TINT16<<16 | gc.TINT8,
// truncate
gc.TUINT16<<16 | gc.TINT8,
gc.TINT32<<16 | gc.TINT8,
gc.TUINT32<<16 | gc.TINT8,
gc.TINT64<<16 | gc.TINT8,
gc.TUINT64<<16 | gc.TINT8,
gc.TINT16<<16 | gc.TUINT8,
gc.TUINT16<<16 | gc.TUINT8,
gc.TINT32<<16 | gc.TUINT8,
gc.TUINT32<<16 | gc.TUINT8,
gc.TINT64<<16 | gc.TUINT8,
gc.TUINT64<<16 | gc.TUINT8:
a = x86.AMOVB
case gc.TINT16<<16 | gc.TINT16, // same size
gc.TINT16<<16 | gc.TUINT16,
gc.TUINT16<<16 | gc.TINT16,
gc.TUINT16<<16 | gc.TUINT16,
gc.TINT32<<16 | gc.TINT16,
// truncate
gc.TUINT32<<16 | gc.TINT16,
gc.TINT64<<16 | gc.TINT16,
gc.TUINT64<<16 | gc.TINT16,
gc.TINT32<<16 | gc.TUINT16,
gc.TUINT32<<16 | gc.TUINT16,
gc.TINT64<<16 | gc.TUINT16,
gc.TUINT64<<16 | gc.TUINT16:
a = x86.AMOVW
case gc.TINT32<<16 | gc.TINT32, // same size
gc.TINT32<<16 | gc.TUINT32,
gc.TUINT32<<16 | gc.TINT32,
gc.TUINT32<<16 | gc.TUINT32:
a = x86.AMOVL
case gc.TINT64<<16 | gc.TINT32, // truncate
gc.TUINT64<<16 | gc.TINT32,
gc.TINT64<<16 | gc.TUINT32,
gc.TUINT64<<16 | gc.TUINT32:
a = x86.AMOVQL
case gc.TINT64<<16 | gc.TINT64, // same size
gc.TINT64<<16 | gc.TUINT64,
gc.TUINT64<<16 | gc.TINT64,
gc.TUINT64<<16 | gc.TUINT64:
a = x86.AMOVQ
/*
* integer up-conversions
*/
case gc.TINT8<<16 | gc.TINT16, // sign extend int8
gc.TINT8<<16 | gc.TUINT16:
a = x86.AMOVBWSX
goto rdst
case gc.TINT8<<16 | gc.TINT32,
gc.TINT8<<16 | gc.TUINT32:
a = x86.AMOVBLSX
goto rdst
case gc.TINT8<<16 | gc.TINT64,
gc.TINT8<<16 | gc.TUINT64:
a = x86.AMOVBQSX
goto rdst
case gc.TUINT8<<16 | gc.TINT16, // zero extend uint8
gc.TUINT8<<16 | gc.TUINT16:
a = x86.AMOVBWZX
goto rdst
case gc.TUINT8<<16 | gc.TINT32,
gc.TUINT8<<16 | gc.TUINT32:
a = x86.AMOVBLZX
goto rdst
case gc.TUINT8<<16 | gc.TINT64,
gc.TUINT8<<16 | gc.TUINT64:
a = x86.AMOVBQZX
goto rdst
case gc.TINT16<<16 | gc.TINT32, // sign extend int16
gc.TINT16<<16 | gc.TUINT32:
a = x86.AMOVWLSX
goto rdst
case gc.TINT16<<16 | gc.TINT64,
gc.TINT16<<16 | gc.TUINT64:
a = x86.AMOVWQSX
goto rdst
case gc.TUINT16<<16 | gc.TINT32, // zero extend uint16
gc.TUINT16<<16 | gc.TUINT32:
a = x86.AMOVWLZX
goto rdst
case gc.TUINT16<<16 | gc.TINT64,
gc.TUINT16<<16 | gc.TUINT64:
a = x86.AMOVWQZX
goto rdst
case gc.TINT32<<16 | gc.TINT64, // sign extend int32
gc.TINT32<<16 | gc.TUINT64:
a = x86.AMOVLQSX
goto rdst
// AMOVL into a register zeros the top of the register,
// so this is not always necessary, but if we rely on AMOVL
// the optimizer is almost certain to screw with us.
case gc.TUINT32<<16 | gc.TINT64, // zero extend uint32
gc.TUINT32<<16 | gc.TUINT64:
a = x86.AMOVLQZX
goto rdst
/*
* float to integer
*/
case gc.TFLOAT32<<16 | gc.TINT32:
a = x86.ACVTTSS2SL
goto rdst
case gc.TFLOAT64<<16 | gc.TINT32:
a = x86.ACVTTSD2SL
goto rdst
case gc.TFLOAT32<<16 | gc.TINT64:
a = x86.ACVTTSS2SQ
goto rdst
case gc.TFLOAT64<<16 | gc.TINT64:
a = x86.ACVTTSD2SQ
goto rdst
// convert via int32.
case gc.TFLOAT32<<16 | gc.TINT16,
gc.TFLOAT32<<16 | gc.TINT8,
gc.TFLOAT32<<16 | gc.TUINT16,
gc.TFLOAT32<<16 | gc.TUINT8,
gc.TFLOAT64<<16 | gc.TINT16,
gc.TFLOAT64<<16 | gc.TINT8,
gc.TFLOAT64<<16 | gc.TUINT16,
gc.TFLOAT64<<16 | gc.TUINT8:
cvt = gc.Types[gc.TINT32]
goto hard
// convert via int64.
case gc.TFLOAT32<<16 | gc.TUINT32,
gc.TFLOAT64<<16 | gc.TUINT32:
cvt = gc.Types[gc.TINT64]
goto hard
// algorithm is:
// if small enough, use native float64 -> int64 conversion.
// otherwise, subtract 2^63, convert, and add it back.
case gc.TFLOAT32<<16 | gc.TUINT64,
gc.TFLOAT64<<16 | gc.TUINT64:
a := x86.ACVTTSS2SQ
if ft == gc.TFLOAT64 {
a = x86.ACVTTSD2SQ
}
bignodes()
var r1 gc.Node
gc.Regalloc(&r1, gc.Types[ft], nil)
var r2 gc.Node
gc.Regalloc(&r2, gc.Types[tt], t)
var r3 gc.Node
gc.Regalloc(&r3, gc.Types[ft], nil)
var r4 gc.Node
gc.Regalloc(&r4, gc.Types[tt], nil)
gins(optoas(gc.OAS, f.Type), f, &r1)
gins(optoas(gc.OCMP, f.Type), &bigf, &r1)
p1 := gc.Gbranch(optoas(gc.OLE, f.Type), nil, +1)
gins(a, &r1, &r2)
p2 := gc.Gbranch(obj.AJMP, nil, 0)
gc.Patch(p1, gc.Pc)
gins(optoas(gc.OAS, f.Type), &bigf, &r3)
gins(optoas(gc.OSUB, f.Type), &r3, &r1)
gins(a, &r1, &r2)
gins(x86.AMOVQ, &bigi, &r4)
gins(x86.AXORQ, &r4, &r2)
gc.Patch(p2, gc.Pc)
gmove(&r2, t)
gc.Regfree(&r4)
gc.Regfree(&r3)
gc.Regfree(&r2)
gc.Regfree(&r1)
return
/*
* integer to float
*/
case gc.TINT32<<16 | gc.TFLOAT32:
a = x86.ACVTSL2SS
goto rdst
case gc.TINT32<<16 | gc.TFLOAT64:
a = x86.ACVTSL2SD
goto rdst
case gc.TINT64<<16 | gc.TFLOAT32:
a = x86.ACVTSQ2SS
goto rdst
case gc.TINT64<<16 | gc.TFLOAT64:
a = x86.ACVTSQ2SD
goto rdst
// convert via int32
case gc.TINT16<<16 | gc.TFLOAT32,
gc.TINT16<<16 | gc.TFLOAT64,
gc.TINT8<<16 | gc.TFLOAT32,
gc.TINT8<<16 | gc.TFLOAT64,
gc.TUINT16<<16 | gc.TFLOAT32,
gc.TUINT16<<16 | gc.TFLOAT64,
gc.TUINT8<<16 | gc.TFLOAT32,
gc.TUINT8<<16 | gc.TFLOAT64:
cvt = gc.Types[gc.TINT32]
goto hard
// convert via int64.
case gc.TUINT32<<16 | gc.TFLOAT32,
gc.TUINT32<<16 | gc.TFLOAT64:
cvt = gc.Types[gc.TINT64]
goto hard
// algorithm is:
// if small enough, use native int64 -> uint64 conversion.
// otherwise, halve (rounding to odd?), convert, and double.
case gc.TUINT64<<16 | gc.TFLOAT32,
gc.TUINT64<<16 | gc.TFLOAT64:
a := x86.ACVTSQ2SS
if tt == gc.TFLOAT64 {
a = x86.ACVTSQ2SD
}
var zero gc.Node
gc.Nodconst(&zero, gc.Types[gc.TUINT64], 0)
var one gc.Node
gc.Nodconst(&one, gc.Types[gc.TUINT64], 1)
var r1 gc.Node
gc.Regalloc(&r1, f.Type, f)
var r2 gc.Node
gc.Regalloc(&r2, t.Type, t)
var r3 gc.Node
gc.Regalloc(&r3, f.Type, nil)
var r4 gc.Node
gc.Regalloc(&r4, f.Type, nil)
gmove(f, &r1)
gins(x86.ACMPQ, &r1, &zero)
p1 := gc.Gbranch(x86.AJLT, nil, +1)
gins(a, &r1, &r2)
p2 := gc.Gbranch(obj.AJMP, nil, 0)
gc.Patch(p1, gc.Pc)
gmove(&r1, &r3)
gins(x86.ASHRQ, &one, &r3)
gmove(&r1, &r4)
gins(x86.AANDL, &one, &r4)
gins(x86.AORQ, &r4, &r3)
gins(a, &r3, &r2)
gins(optoas(gc.OADD, t.Type), &r2, &r2)
gc.Patch(p2, gc.Pc)
gmove(&r2, t)
gc.Regfree(&r4)
gc.Regfree(&r3)
gc.Regfree(&r2)
gc.Regfree(&r1)
return
/*
* float to float
*/
case gc.TFLOAT32<<16 | gc.TFLOAT32:
a = x86.AMOVSS
case gc.TFLOAT64<<16 | gc.TFLOAT64:
a = x86.AMOVSD
case gc.TFLOAT32<<16 | gc.TFLOAT64:
a = x86.ACVTSS2SD
goto rdst
case gc.TFLOAT64<<16 | gc.TFLOAT32:
a = x86.ACVTSD2SS
goto rdst
}
gins(a, f, t)
return
// requires register destination
rdst:
{
var r1 gc.Node
gc.Regalloc(&r1, t.Type, t)
gins(a, f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
// requires register intermediate
hard:
var r1 gc.Node
gc.Regalloc(&r1, cvt, t)
gmove(f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
/*
* generate move:
* t = f
* hard part is conversions.
*/
func gmove(f *gc.Node, t *gc.Node) {
if gc.Debug['M'] != 0 {
fmt.Printf("gmove %v -> %v\n", gc.Nconv(f, obj.FmtLong), gc.Nconv(t, obj.FmtLong))
}
ft := int(gc.Simsimtype(f.Type))
tt := int(gc.Simsimtype(t.Type))
cvt := t.Type
if gc.Iscomplex[ft] || gc.Iscomplex[tt] {
gc.Complexmove(f, t)
return
}
// cannot have two memory operands
var r2 gc.Node
var r1 gc.Node
var a int
if gc.Ismem(f) && gc.Ismem(t) {
goto hard
}
// convert constant to desired type
if f.Op == gc.OLITERAL {
var con gc.Node
switch tt {
default:
f.Convconst(&con, t.Type)
case gc.TINT32,
gc.TINT16,
gc.TINT8:
var con gc.Node
f.Convconst(&con, gc.Types[gc.TINT64])
var r1 gc.Node
gc.Regalloc(&r1, con.Type, t)
gins(mips.AMOVV, &con, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
case gc.TUINT32,
gc.TUINT16,
gc.TUINT8:
var con gc.Node
f.Convconst(&con, gc.Types[gc.TUINT64])
var r1 gc.Node
gc.Regalloc(&r1, con.Type, t)
gins(mips.AMOVV, &con, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
f = &con
ft = tt // so big switch will choose a simple mov
// constants can't move directly to memory.
if gc.Ismem(t) {
goto hard
}
}
// value -> value copy, first operand in memory.
// any floating point operand requires register
// src, so goto hard to copy to register first.
if gc.Ismem(f) && ft != tt && (gc.Isfloat[ft] || gc.Isfloat[tt]) {
cvt = gc.Types[ft]
goto hard
}
// value -> value copy, only one memory operand.
// figure out the instruction to use.
// break out of switch for one-instruction gins.
// goto rdst for "destination must be register".
// goto hard for "convert to cvt type first".
// otherwise handle and return.
switch uint32(ft)<<16 | uint32(tt) {
default:
gc.Fatalf("gmove %v -> %v", gc.Tconv(f.Type, obj.FmtLong), gc.Tconv(t.Type, obj.FmtLong))
/*
* integer copy and truncate
*/
case gc.TINT8<<16 | gc.TINT8, // same size
gc.TUINT8<<16 | gc.TINT8,
gc.TINT16<<16 | gc.TINT8, // truncate
gc.TUINT16<<16 | gc.TINT8,
gc.TINT32<<16 | gc.TINT8,
gc.TUINT32<<16 | gc.TINT8,
gc.TINT64<<16 | gc.TINT8,
gc.TUINT64<<16 | gc.TINT8:
a = mips.AMOVB
case gc.TINT8<<16 | gc.TUINT8, // same size
gc.TUINT8<<16 | gc.TUINT8,
gc.TINT16<<16 | gc.TUINT8, // truncate
gc.TUINT16<<16 | gc.TUINT8,
gc.TINT32<<16 | gc.TUINT8,
gc.TUINT32<<16 | gc.TUINT8,
gc.TINT64<<16 | gc.TUINT8,
gc.TUINT64<<16 | gc.TUINT8:
a = mips.AMOVBU
case gc.TINT16<<16 | gc.TINT16, // same size
gc.TUINT16<<16 | gc.TINT16,
gc.TINT32<<16 | gc.TINT16, // truncate
gc.TUINT32<<16 | gc.TINT16,
gc.TINT64<<16 | gc.TINT16,
gc.TUINT64<<16 | gc.TINT16:
a = mips.AMOVH
case gc.TINT16<<16 | gc.TUINT16, // same size
gc.TUINT16<<16 | gc.TUINT16,
gc.TINT32<<16 | gc.TUINT16, // truncate
gc.TUINT32<<16 | gc.TUINT16,
gc.TINT64<<16 | gc.TUINT16,
gc.TUINT64<<16 | gc.TUINT16:
a = mips.AMOVHU
case gc.TINT32<<16 | gc.TINT32, // same size
gc.TUINT32<<16 | gc.TINT32,
gc.TINT64<<16 | gc.TINT32, // truncate
gc.TUINT64<<16 | gc.TINT32:
a = mips.AMOVW
case gc.TINT32<<16 | gc.TUINT32, // same size
gc.TUINT32<<16 | gc.TUINT32,
gc.TINT64<<16 | gc.TUINT32, // truncate
gc.TUINT64<<16 | gc.TUINT32:
a = mips.AMOVWU
case gc.TINT64<<16 | gc.TINT64, // same size
gc.TINT64<<16 | gc.TUINT64,
gc.TUINT64<<16 | gc.TINT64,
gc.TUINT64<<16 | gc.TUINT64:
a = mips.AMOVV
/*
* integer up-conversions
*/
case gc.TINT8<<16 | gc.TINT16, // sign extend int8
gc.TINT8<<16 | gc.TUINT16,
gc.TINT8<<16 | gc.TINT32,
gc.TINT8<<16 | gc.TUINT32,
gc.TINT8<<16 | gc.TINT64,
gc.TINT8<<16 | gc.TUINT64:
a = mips.AMOVB
goto rdst
case gc.TUINT8<<16 | gc.TINT16, // zero extend uint8
gc.TUINT8<<16 | gc.TUINT16,
gc.TUINT8<<16 | gc.TINT32,
gc.TUINT8<<16 | gc.TUINT32,
gc.TUINT8<<16 | gc.TINT64,
gc.TUINT8<<16 | gc.TUINT64:
a = mips.AMOVBU
goto rdst
case gc.TINT16<<16 | gc.TINT32, // sign extend int16
gc.TINT16<<16 | gc.TUINT32,
gc.TINT16<<16 | gc.TINT64,
gc.TINT16<<16 | gc.TUINT64:
a = mips.AMOVH
goto rdst
case gc.TUINT16<<16 | gc.TINT32, // zero extend uint16
gc.TUINT16<<16 | gc.TUINT32,
gc.TUINT16<<16 | gc.TINT64,
gc.TUINT16<<16 | gc.TUINT64:
a = mips.AMOVHU
goto rdst
case gc.TINT32<<16 | gc.TINT64, // sign extend int32
gc.TINT32<<16 | gc.TUINT64:
a = mips.AMOVW
goto rdst
case gc.TUINT32<<16 | gc.TINT64, // zero extend uint32
gc.TUINT32<<16 | gc.TUINT64:
a = mips.AMOVWU
goto rdst
//warn("gmove: convert float to int not implemented: %N -> %N\n", f, t);
//return;
// algorithm is:
// if small enough, use native float64 -> int64 conversion.
// otherwise, subtract 2^63, convert, and add it back.
/*
* float to integer
*/
case gc.TFLOAT32<<16 | gc.TINT32,
gc.TFLOAT64<<16 | gc.TINT32,
gc.TFLOAT32<<16 | gc.TINT64,
gc.TFLOAT64<<16 | gc.TINT64,
gc.TFLOAT32<<16 | gc.TINT16,
gc.TFLOAT32<<16 | gc.TINT8,
gc.TFLOAT32<<16 | gc.TUINT16,
gc.TFLOAT32<<16 | gc.TUINT8,
gc.TFLOAT64<<16 | gc.TINT16,
gc.TFLOAT64<<16 | gc.TINT8,
gc.TFLOAT64<<16 | gc.TUINT16,
gc.TFLOAT64<<16 | gc.TUINT8,
gc.TFLOAT32<<16 | gc.TUINT32,
gc.TFLOAT64<<16 | gc.TUINT32,
gc.TFLOAT32<<16 | gc.TUINT64,
gc.TFLOAT64<<16 | gc.TUINT64:
bignodes()
gc.Regalloc(&r1, gc.Types[gc.TFLOAT64], nil)
gmove(f, &r1)
if tt == gc.TUINT64 {
gc.Regalloc(&r2, gc.Types[gc.TFLOAT64], nil)
gmove(&bigf, &r2)
gins3(mips.ACMPGED, &r1, &r2, nil)
p1 := gc.Gbranch(mips.ABFPF, nil, 0)
gins(mips.ASUBD, &r2, &r1)
gc.Patch(p1, gc.Pc)
gc.Regfree(&r2)
}
gc.Regalloc(&r2, gc.Types[gc.TINT64], t)
gins(mips.ATRUNCDV, &r1, &r1)
gins(mips.AMOVV, &r1, &r2)
gc.Regfree(&r1)
if tt == gc.TUINT64 {
p1 := gc.Gbranch(mips.ABFPF, nil, 0) // use FCR0 here again
gc.Nodreg(&r1, gc.Types[gc.TINT64], mips.REGTMP)
gmove(&bigi, &r1)
gins(mips.AADDVU, &r1, &r2)
gc.Patch(p1, gc.Pc)
}
gmove(&r2, t)
gc.Regfree(&r2)
return
//warn("gmove: convert int to float not implemented: %N -> %N\n", f, t);
//return;
// algorithm is:
// if small enough, use native int64 -> float64 conversion.
// otherwise, halve (rounding to odd?), convert, and double.
/*
* integer to float
*/
case gc.TINT32<<16 | gc.TFLOAT32,
gc.TINT32<<16 | gc.TFLOAT64,
gc.TINT64<<16 | gc.TFLOAT32,
gc.TINT64<<16 | gc.TFLOAT64,
gc.TINT16<<16 | gc.TFLOAT32,
gc.TINT16<<16 | gc.TFLOAT64,
gc.TINT8<<16 | gc.TFLOAT32,
gc.TINT8<<16 | gc.TFLOAT64,
gc.TUINT16<<16 | gc.TFLOAT32,
gc.TUINT16<<16 | gc.TFLOAT64,
gc.TUINT8<<16 | gc.TFLOAT32,
gc.TUINT8<<16 | gc.TFLOAT64,
gc.TUINT32<<16 | gc.TFLOAT32,
gc.TUINT32<<16 | gc.TFLOAT64,
gc.TUINT64<<16 | gc.TFLOAT32,
gc.TUINT64<<16 | gc.TFLOAT64:
bignodes()
var rtmp gc.Node
gc.Regalloc(&r1, gc.Types[gc.TINT64], nil)
gmove(f, &r1)
if ft == gc.TUINT64 {
gc.Nodreg(&rtmp, gc.Types[gc.TUINT64], mips.REGTMP)
gmove(&bigi, &rtmp)
gins(mips.AAND, &r1, &rtmp)
p1 := ginsbranch(mips.ABEQ, nil, &rtmp, nil, 0)
p2 := gins(mips.ASRLV, nil, &r1)
p2.From.Type = obj.TYPE_CONST
p2.From.Offset = 1
gc.Patch(p1, gc.Pc)
}
gc.Regalloc(&r2, gc.Types[gc.TFLOAT64], t)
gins(mips.AMOVV, &r1, &r2)
gins(mips.AMOVVD, &r2, &r2)
gc.Regfree(&r1)
if ft == gc.TUINT64 {
p1 := ginsbranch(mips.ABEQ, nil, &rtmp, nil, 0)
gc.Nodreg(&r1, gc.Types[gc.TFLOAT64], mips.FREGTWO)
gins(mips.AMULD, &r1, &r2)
gc.Patch(p1, gc.Pc)
}
gmove(&r2, t)
gc.Regfree(&r2)
return
/*
* float to float
*/
case gc.TFLOAT32<<16 | gc.TFLOAT32:
a = mips.AMOVF
case gc.TFLOAT64<<16 | gc.TFLOAT64:
a = mips.AMOVD
case gc.TFLOAT32<<16 | gc.TFLOAT64:
a = mips.AMOVFD
goto rdst
case gc.TFLOAT64<<16 | gc.TFLOAT32:
a = mips.AMOVDF
goto rdst
}
gins(a, f, t)
return
// requires register destination
rdst:
{
gc.Regalloc(&r1, t.Type, t)
gins(a, f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
// requires register intermediate
hard:
gc.Regalloc(&r1, cvt, t)
gmove(f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
/*
* generate move:
* t = f
* hard part is conversions.
*/
func gmove(f *gc.Node, t *gc.Node) {
if gc.Debug['M'] != 0 {
fmt.Printf("gmove %v -> %v\n", gc.Nconv(f, obj.FmtLong), gc.Nconv(t, obj.FmtLong))
}
ft := int(gc.Simsimtype(f.Type))
tt := int(gc.Simsimtype(t.Type))
cvt := (*gc.Type)(t.Type)
if gc.Iscomplex[ft] || gc.Iscomplex[tt] {
gc.Complexmove(f, t)
return
}
// cannot have two memory operands
var a int
if gc.Ismem(f) && gc.Ismem(t) {
if gmvc(f, t) {
return
}
goto hard
}
// convert constant to desired type
if f.Op == gc.OLITERAL {
var con gc.Node
f.Convconst(&con, t.Type)
f = &con
ft = tt // so big switch will choose a simple mov
// some constants can't move directly to memory.
if gc.Ismem(t) {
// float constants come from memory.
if gc.Isfloat[tt] {
goto hard
}
// all immediates are 16-bit sign-extended
// unless moving into a register.
if gc.Isint[tt] {
if i := con.Int(); int64(int16(i)) != i {
goto hard
}
}
}
}
// a float-to-int or int-to-float conversion requires the source operand in a register
if gc.Ismem(f) && ((gc.Isfloat[ft] && gc.Isint[tt]) || (gc.Isint[ft] && gc.Isfloat[tt])) {
cvt = (*gc.Type)(f.Type)
goto hard
}
// a float32-to-float64 or float64-to-float32 conversion requires the source operand in a register
if gc.Ismem(f) && gc.Isfloat[ft] && gc.Isfloat[tt] && (ft != tt) {
cvt = (*gc.Type)(f.Type)
goto hard
}
// float constants come from memory.
//if(isfloat[tt])
// goto hard;
// 64-bit immediates are also from memory.
//if(isint[tt])
// goto hard;
//// 64-bit immediates are really 32-bit sign-extended
//// unless moving into a register.
//if(isint[tt]) {
// if(mpcmpfixfix(con.val.u.xval, minintval[TINT32]) < 0)
// goto hard;
// if(mpcmpfixfix(con.val.u.xval, maxintval[TINT32]) > 0)
// goto hard;
//}
// value -> value copy, only one memory operand.
// figure out the instruction to use.
// break out of switch for one-instruction gins.
// goto rdst for "destination must be register".
// goto hard for "convert to cvt type first".
// otherwise handle and return.
switch uint32(ft)<<16 | uint32(tt) {
default:
gc.Fatalf("gmove %v -> %v", gc.Tconv(f.Type, obj.FmtLong), gc.Tconv(t.Type, obj.FmtLong))
/*
* integer copy and truncate
*/
case gc.TINT8<<16 | gc.TINT8, // same size
gc.TUINT8<<16 | gc.TINT8,
gc.TINT16<<16 | gc.TINT8,
// truncate
gc.TUINT16<<16 | gc.TINT8,
gc.TINT32<<16 | gc.TINT8,
gc.TUINT32<<16 | gc.TINT8,
gc.TINT64<<16 | gc.TINT8,
gc.TUINT64<<16 | gc.TINT8:
a = s390x.AMOVB
case gc.TINT8<<16 | gc.TUINT8, // same size
gc.TUINT8<<16 | gc.TUINT8,
gc.TINT16<<16 | gc.TUINT8,
// truncate
gc.TUINT16<<16 | gc.TUINT8,
gc.TINT32<<16 | gc.TUINT8,
gc.TUINT32<<16 | gc.TUINT8,
gc.TINT64<<16 | gc.TUINT8,
gc.TUINT64<<16 | gc.TUINT8:
a = s390x.AMOVBZ
case gc.TINT16<<16 | gc.TINT16, // same size
gc.TUINT16<<16 | gc.TINT16,
gc.TINT32<<16 | gc.TINT16,
// truncate
gc.TUINT32<<16 | gc.TINT16,
gc.TINT64<<16 | gc.TINT16,
gc.TUINT64<<16 | gc.TINT16:
a = s390x.AMOVH
case gc.TINT16<<16 | gc.TUINT16, // same size
gc.TUINT16<<16 | gc.TUINT16,
gc.TINT32<<16 | gc.TUINT16,
// truncate
gc.TUINT32<<16 | gc.TUINT16,
gc.TINT64<<16 | gc.TUINT16,
gc.TUINT64<<16 | gc.TUINT16:
a = s390x.AMOVHZ
case gc.TINT32<<16 | gc.TINT32, // same size
gc.TUINT32<<16 | gc.TINT32,
gc.TINT64<<16 | gc.TINT32,
// truncate
gc.TUINT64<<16 | gc.TINT32:
a = s390x.AMOVW
case gc.TINT32<<16 | gc.TUINT32, // same size
gc.TUINT32<<16 | gc.TUINT32,
gc.TINT64<<16 | gc.TUINT32,
gc.TUINT64<<16 | gc.TUINT32:
a = s390x.AMOVWZ
case gc.TINT64<<16 | gc.TINT64, // same size
gc.TINT64<<16 | gc.TUINT64,
gc.TUINT64<<16 | gc.TINT64,
gc.TUINT64<<16 | gc.TUINT64:
a = s390x.AMOVD
/*
* integer up-conversions
*/
case gc.TINT8<<16 | gc.TINT16, // sign extend int8
gc.TINT8<<16 | gc.TUINT16,
gc.TINT8<<16 | gc.TINT32,
gc.TINT8<<16 | gc.TUINT32,
gc.TINT8<<16 | gc.TINT64,
gc.TINT8<<16 | gc.TUINT64:
a = s390x.AMOVB
goto rdst
case gc.TUINT8<<16 | gc.TINT16, // zero extend uint8
gc.TUINT8<<16 | gc.TUINT16,
gc.TUINT8<<16 | gc.TINT32,
gc.TUINT8<<16 | gc.TUINT32,
gc.TUINT8<<16 | gc.TINT64,
gc.TUINT8<<16 | gc.TUINT64:
a = s390x.AMOVBZ
goto rdst
case gc.TINT16<<16 | gc.TINT32, // sign extend int16
gc.TINT16<<16 | gc.TUINT32,
gc.TINT16<<16 | gc.TINT64,
gc.TINT16<<16 | gc.TUINT64:
a = s390x.AMOVH
goto rdst
case gc.TUINT16<<16 | gc.TINT32, // zero extend uint16
gc.TUINT16<<16 | gc.TUINT32,
gc.TUINT16<<16 | gc.TINT64,
gc.TUINT16<<16 | gc.TUINT64:
a = s390x.AMOVHZ
goto rdst
case gc.TINT32<<16 | gc.TINT64, // sign extend int32
gc.TINT32<<16 | gc.TUINT64:
a = s390x.AMOVW
goto rdst
case gc.TUINT32<<16 | gc.TINT64, // zero extend uint32
gc.TUINT32<<16 | gc.TUINT64:
a = s390x.AMOVWZ
goto rdst
/*
* float to integer
*/
case gc.TFLOAT32<<16 | gc.TUINT8,
gc.TFLOAT32<<16 | gc.TUINT16:
cvt = gc.Types[gc.TUINT32]
goto hard
case gc.TFLOAT32<<16 | gc.TUINT32:
a = s390x.ACLFEBR
goto rdst
case gc.TFLOAT32<<16 | gc.TUINT64:
a = s390x.ACLGEBR
goto rdst
case gc.TFLOAT64<<16 | gc.TUINT8,
gc.TFLOAT64<<16 | gc.TUINT16:
cvt = gc.Types[gc.TUINT32]
goto hard
case gc.TFLOAT64<<16 | gc.TUINT32:
a = s390x.ACLFDBR
goto rdst
case gc.TFLOAT64<<16 | gc.TUINT64:
a = s390x.ACLGDBR
goto rdst
case gc.TFLOAT32<<16 | gc.TINT8,
gc.TFLOAT32<<16 | gc.TINT16:
cvt = gc.Types[gc.TINT32]
goto hard
case gc.TFLOAT32<<16 | gc.TINT32:
a = s390x.ACFEBRA
goto rdst
case gc.TFLOAT32<<16 | gc.TINT64:
a = s390x.ACGEBRA
goto rdst
case gc.TFLOAT64<<16 | gc.TINT8,
gc.TFLOAT64<<16 | gc.TINT16:
cvt = gc.Types[gc.TINT32]
goto hard
case gc.TFLOAT64<<16 | gc.TINT32:
a = s390x.ACFDBRA
goto rdst
case gc.TFLOAT64<<16 | gc.TINT64:
a = s390x.ACGDBRA
goto rdst
/*
* integer to float
*/
case gc.TUINT8<<16 | gc.TFLOAT32,
gc.TUINT16<<16 | gc.TFLOAT32:
cvt = gc.Types[gc.TUINT32]
goto hard
case gc.TUINT32<<16 | gc.TFLOAT32:
a = s390x.ACELFBR
goto rdst
case gc.TUINT64<<16 | gc.TFLOAT32:
a = s390x.ACELGBR
goto rdst
case gc.TUINT8<<16 | gc.TFLOAT64,
gc.TUINT16<<16 | gc.TFLOAT64:
cvt = gc.Types[gc.TUINT32]
goto hard
case gc.TUINT32<<16 | gc.TFLOAT64:
a = s390x.ACDLFBR
goto rdst
case gc.TUINT64<<16 | gc.TFLOAT64:
a = s390x.ACDLGBR
goto rdst
case gc.TINT8<<16 | gc.TFLOAT32,
gc.TINT16<<16 | gc.TFLOAT32:
cvt = gc.Types[gc.TINT32]
goto hard
case gc.TINT32<<16 | gc.TFLOAT32:
a = s390x.ACEFBRA
goto rdst
case gc.TINT64<<16 | gc.TFLOAT32:
a = s390x.ACEGBRA
goto rdst
case gc.TINT8<<16 | gc.TFLOAT64,
gc.TINT16<<16 | gc.TFLOAT64:
cvt = gc.Types[gc.TINT32]
goto hard
case gc.TINT32<<16 | gc.TFLOAT64:
a = s390x.ACDFBRA
goto rdst
case gc.TINT64<<16 | gc.TFLOAT64:
a = s390x.ACDGBRA
goto rdst
/*
* float to float
*/
case gc.TFLOAT32<<16 | gc.TFLOAT32:
a = s390x.AFMOVS
case gc.TFLOAT64<<16 | gc.TFLOAT64:
a = s390x.AFMOVD
case gc.TFLOAT32<<16 | gc.TFLOAT64:
a = s390x.ALDEBR
goto rdst
case gc.TFLOAT64<<16 | gc.TFLOAT32:
a = s390x.AFRSP
goto rdst
}
gins(a, f, t)
return
// requires register destination
rdst:
{
var r1 gc.Node
gc.Regalloc(&r1, t.Type, t)
gins(a, f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
// requires register intermediate
hard:
var r1 gc.Node
gc.Regalloc(&r1, cvt, t)
gmove(f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
// generate move:
// t = f
// hard part is conversions.
func gmove(f *gc.Node, t *gc.Node) {
if gc.Debug['M'] != 0 {
fmt.Printf("gmove %v -> %v\n", gc.Nconv(f, gc.FmtLong), gc.Nconv(t, gc.FmtLong))
}
ft := int(gc.Simsimtype(f.Type))
tt := int(gc.Simsimtype(t.Type))
cvt := t.Type
if gc.Iscomplex[ft] || gc.Iscomplex[tt] {
gc.Complexmove(f, t)
return
}
var a obj.As
// cannot have two memory operands
if gc.Ismem(f) && gc.Ismem(t) {
if gmvc(f, t) {
return
}
goto hard
}
// convert constant to desired type
if f.Op == gc.OLITERAL {
var con gc.Node
f.Convconst(&con, t.Type)
f = &con
ft = tt // so big switch will choose a simple mov
// some constants can't move directly to memory.
if gc.Ismem(t) {
// float constants come from memory.
if t.Type.IsFloat() {
goto hard
}
// all immediates are 16-bit sign-extended
// unless moving into a register.
if t.Type.IsInteger() {
if i := con.Int64(); int64(int16(i)) != i {
goto hard
}
}
// immediate moves to memory have a 12-bit unsigned displacement
if t.Xoffset < 0 || t.Xoffset >= 4096-8 {
goto hard
}
}
}
// a float-to-int or int-to-float conversion requires the source operand in a register
if gc.Ismem(f) && ((f.Type.IsFloat() && t.Type.IsInteger()) || (f.Type.IsInteger() && t.Type.IsFloat())) {
cvt = f.Type
goto hard
}
// a float32-to-float64 or float64-to-float32 conversion requires the source operand in a register
if gc.Ismem(f) && f.Type.IsFloat() && t.Type.IsFloat() && (ft != tt) {
cvt = f.Type
goto hard
}
// value -> value copy, only one memory operand.
// figure out the instruction to use.
// break out of switch for one-instruction gins.
// goto rdst for "destination must be register".
// goto hard for "convert to cvt type first".
// otherwise handle and return.
switch uint32(ft)<<16 | uint32(tt) {
default:
gc.Fatalf("gmove %v -> %v", gc.Tconv(f.Type, gc.FmtLong), gc.Tconv(t.Type, gc.FmtLong))
// integer copy and truncate
case gc.TINT8<<16 | gc.TINT8,
gc.TUINT8<<16 | gc.TINT8,
gc.TINT16<<16 | gc.TINT8,
gc.TUINT16<<16 | gc.TINT8,
gc.TINT32<<16 | gc.TINT8,
gc.TUINT32<<16 | gc.TINT8,
gc.TINT64<<16 | gc.TINT8,
gc.TUINT64<<16 | gc.TINT8:
a = s390x.AMOVB
case gc.TINT8<<16 | gc.TUINT8,
gc.TUINT8<<16 | gc.TUINT8,
gc.TINT16<<16 | gc.TUINT8,
gc.TUINT16<<16 | gc.TUINT8,
gc.TINT32<<16 | gc.TUINT8,
gc.TUINT32<<16 | gc.TUINT8,
gc.TINT64<<16 | gc.TUINT8,
gc.TUINT64<<16 | gc.TUINT8:
a = s390x.AMOVBZ
case gc.TINT16<<16 | gc.TINT16,
gc.TUINT16<<16 | gc.TINT16,
gc.TINT32<<16 | gc.TINT16,
gc.TUINT32<<16 | gc.TINT16,
gc.TINT64<<16 | gc.TINT16,
gc.TUINT64<<16 | gc.TINT16:
a = s390x.AMOVH
case gc.TINT16<<16 | gc.TUINT16,
gc.TUINT16<<16 | gc.TUINT16,
gc.TINT32<<16 | gc.TUINT16,
gc.TUINT32<<16 | gc.TUINT16,
gc.TINT64<<16 | gc.TUINT16,
gc.TUINT64<<16 | gc.TUINT16:
a = s390x.AMOVHZ
case gc.TINT32<<16 | gc.TINT32,
gc.TUINT32<<16 | gc.TINT32,
gc.TINT64<<16 | gc.TINT32,
gc.TUINT64<<16 | gc.TINT32:
a = s390x.AMOVW
case gc.TINT32<<16 | gc.TUINT32,
gc.TUINT32<<16 | gc.TUINT32,
gc.TINT64<<16 | gc.TUINT32,
gc.TUINT64<<16 | gc.TUINT32:
a = s390x.AMOVWZ
case gc.TINT64<<16 | gc.TINT64,
gc.TINT64<<16 | gc.TUINT64,
gc.TUINT64<<16 | gc.TINT64,
gc.TUINT64<<16 | gc.TUINT64:
a = s390x.AMOVD
// sign extend int8
case gc.TINT8<<16 | gc.TINT16,
gc.TINT8<<16 | gc.TUINT16,
gc.TINT8<<16 | gc.TINT32,
gc.TINT8<<16 | gc.TUINT32,
gc.TINT8<<16 | gc.TINT64,
gc.TINT8<<16 | gc.TUINT64:
a = s390x.AMOVB
goto rdst
// sign extend uint8
case gc.TUINT8<<16 | gc.TINT16,
gc.TUINT8<<16 | gc.TUINT16,
gc.TUINT8<<16 | gc.TINT32,
gc.TUINT8<<16 | gc.TUINT32,
gc.TUINT8<<16 | gc.TINT64,
gc.TUINT8<<16 | gc.TUINT64:
a = s390x.AMOVBZ
goto rdst
// sign extend int16
case gc.TINT16<<16 | gc.TINT32,
gc.TINT16<<16 | gc.TUINT32,
gc.TINT16<<16 | gc.TINT64,
gc.TINT16<<16 | gc.TUINT64:
a = s390x.AMOVH
goto rdst
// zero extend uint16
case gc.TUINT16<<16 | gc.TINT32,
gc.TUINT16<<16 | gc.TUINT32,
gc.TUINT16<<16 | gc.TINT64,
gc.TUINT16<<16 | gc.TUINT64:
a = s390x.AMOVHZ
goto rdst
// sign extend int32
case gc.TINT32<<16 | gc.TINT64,
gc.TINT32<<16 | gc.TUINT64:
a = s390x.AMOVW
goto rdst
// zero extend uint32
case gc.TUINT32<<16 | gc.TINT64,
gc.TUINT32<<16 | gc.TUINT64:
a = s390x.AMOVWZ
goto rdst
// float to integer
case gc.TFLOAT32<<16 | gc.TUINT8,
gc.TFLOAT32<<16 | gc.TUINT16:
cvt = gc.Types[gc.TUINT32]
goto hard
case gc.TFLOAT32<<16 | gc.TUINT32:
a = s390x.ACLFEBR
goto rdst
case gc.TFLOAT32<<16 | gc.TUINT64:
a = s390x.ACLGEBR
goto rdst
case gc.TFLOAT64<<16 | gc.TUINT8,
gc.TFLOAT64<<16 | gc.TUINT16:
cvt = gc.Types[gc.TUINT32]
goto hard
case gc.TFLOAT64<<16 | gc.TUINT32:
a = s390x.ACLFDBR
goto rdst
case gc.TFLOAT64<<16 | gc.TUINT64:
a = s390x.ACLGDBR
goto rdst
case gc.TFLOAT32<<16 | gc.TINT8,
gc.TFLOAT32<<16 | gc.TINT16:
cvt = gc.Types[gc.TINT32]
goto hard
case gc.TFLOAT32<<16 | gc.TINT32:
a = s390x.ACFEBRA
goto rdst
case gc.TFLOAT32<<16 | gc.TINT64:
a = s390x.ACGEBRA
goto rdst
case gc.TFLOAT64<<16 | gc.TINT8,
gc.TFLOAT64<<16 | gc.TINT16:
cvt = gc.Types[gc.TINT32]
goto hard
case gc.TFLOAT64<<16 | gc.TINT32:
a = s390x.ACFDBRA
goto rdst
case gc.TFLOAT64<<16 | gc.TINT64:
a = s390x.ACGDBRA
goto rdst
// integer to float
case gc.TUINT8<<16 | gc.TFLOAT32,
gc.TUINT16<<16 | gc.TFLOAT32:
cvt = gc.Types[gc.TUINT32]
goto hard
case gc.TUINT32<<16 | gc.TFLOAT32:
a = s390x.ACELFBR
goto rdst
case gc.TUINT64<<16 | gc.TFLOAT32:
a = s390x.ACELGBR
goto rdst
case gc.TUINT8<<16 | gc.TFLOAT64,
gc.TUINT16<<16 | gc.TFLOAT64:
cvt = gc.Types[gc.TUINT32]
goto hard
case gc.TUINT32<<16 | gc.TFLOAT64:
a = s390x.ACDLFBR
goto rdst
case gc.TUINT64<<16 | gc.TFLOAT64:
a = s390x.ACDLGBR
goto rdst
case gc.TINT8<<16 | gc.TFLOAT32,
gc.TINT16<<16 | gc.TFLOAT32:
cvt = gc.Types[gc.TINT32]
goto hard
case gc.TINT32<<16 | gc.TFLOAT32:
a = s390x.ACEFBRA
goto rdst
case gc.TINT64<<16 | gc.TFLOAT32:
a = s390x.ACEGBRA
goto rdst
case gc.TINT8<<16 | gc.TFLOAT64,
gc.TINT16<<16 | gc.TFLOAT64:
cvt = gc.Types[gc.TINT32]
goto hard
case gc.TINT32<<16 | gc.TFLOAT64:
a = s390x.ACDFBRA
goto rdst
case gc.TINT64<<16 | gc.TFLOAT64:
a = s390x.ACDGBRA
goto rdst
// float to float
case gc.TFLOAT32<<16 | gc.TFLOAT32:
a = s390x.AFMOVS
case gc.TFLOAT64<<16 | gc.TFLOAT64:
a = s390x.AFMOVD
case gc.TFLOAT32<<16 | gc.TFLOAT64:
a = s390x.ALDEBR
goto rdst
case gc.TFLOAT64<<16 | gc.TFLOAT32:
a = s390x.ALEDBR
goto rdst
}
gins(a, f, t)
return
// requires register destination
rdst:
if t != nil && t.Op == gc.OREGISTER {
gins(a, f, t)
return
} else {
var r1 gc.Node
gc.Regalloc(&r1, t.Type, t)
gins(a, f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
// requires register intermediate
hard:
var r1 gc.Node
gc.Regalloc(&r1, cvt, t)
gmove(f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}