func savex(dr int, x *gc.Node, oldx *gc.Node, res *gc.Node, t *gc.Type) {
r := int(reg[dr])
gc.Nodreg(x, gc.Types[gc.TINT32], dr)
// save current ax and dx if they are live
// and not the destination
*oldx = gc.Node{}
if r > 0 && !gc.Samereg(x, res) {
gc.Tempname(oldx, gc.Types[gc.TINT32])
gmove(x, oldx)
}
gc.Regalloc(x, t, x)
}
/*
* register dr is one of the special ones (AX, CX, DI, SI, etc.).
* we need to use it. if it is already allocated as a temporary
* (r > 1; can only happen if a routine like sgen passed a
* special as cgen's res and then cgen used regalloc to reuse
* it as its own temporary), then move it for now to another
* register. caller must call restx to move it back.
* the move is not necessary if dr == res, because res is
* known to be dead.
*/
func savex(dr int, x *gc.Node, oldx *gc.Node, res *gc.Node, t *gc.Type) {
r := int(reg[dr])
// save current ax and dx if they are live
// and not the destination
*oldx = gc.Node{}
gc.Nodreg(x, t, dr)
if r > 1 && !gc.Samereg(x, res) {
gc.Regalloc(oldx, gc.Types[gc.TINT64], nil)
x.Type = gc.Types[gc.TINT64]
gmove(x, oldx)
x.Type = t
oldx.Ostk = int32(r) // squirrel away old r value
reg[dr] = 1
}
}
/*
* generate shift according to op, one of:
* res = nl << nr
* res = nl >> nr
*/
func cgen_shift(op int, bounded bool, nl *gc.Node, nr *gc.Node, res *gc.Node) {
if nl.Type.Width > 4 {
gc.Fatal("cgen_shift %v", gc.Tconv(nl.Type, 0))
}
w := int(nl.Type.Width * 8)
a := optoas(op, nl.Type)
if nr.Op == gc.OLITERAL {
var n2 gc.Node
gc.Tempname(&n2, nl.Type)
gc.Cgen(nl, &n2)
var n1 gc.Node
gc.Regalloc(&n1, nl.Type, res)
gmove(&n2, &n1)
sc := uint64(gc.Mpgetfix(nr.Val.U.Xval))
if sc >= uint64(nl.Type.Width*8) {
// large shift gets 2 shifts by width-1
gins(a, ncon(uint32(w)-1), &n1)
gins(a, ncon(uint32(w)-1), &n1)
} else {
gins(a, nr, &n1)
}
gmove(&n1, res)
gc.Regfree(&n1)
return
}
var oldcx gc.Node
var cx gc.Node
gc.Nodreg(&cx, gc.Types[gc.TUINT32], x86.REG_CX)
if reg[x86.REG_CX] > 1 && !gc.Samereg(&cx, res) {
gc.Tempname(&oldcx, gc.Types[gc.TUINT32])
gmove(&cx, &oldcx)
}
var n1 gc.Node
var nt gc.Node
if nr.Type.Width > 4 {
gc.Tempname(&nt, nr.Type)
n1 = nt
} else {
gc.Nodreg(&n1, gc.Types[gc.TUINT32], x86.REG_CX)
gc.Regalloc(&n1, nr.Type, &n1) // to hold the shift type in CX
}
var n2 gc.Node
if gc.Samereg(&cx, res) {
gc.Regalloc(&n2, nl.Type, nil)
} else {
gc.Regalloc(&n2, nl.Type, res)
}
if nl.Ullman >= nr.Ullman {
gc.Cgen(nl, &n2)
gc.Cgen(nr, &n1)
} else {
gc.Cgen(nr, &n1)
gc.Cgen(nl, &n2)
}
// test and fix up large shifts
if bounded {
if nr.Type.Width > 4 {
// delayed reg alloc
gc.Nodreg(&n1, gc.Types[gc.TUINT32], x86.REG_CX)
gc.Regalloc(&n1, gc.Types[gc.TUINT32], &n1) // to hold the shift type in CX
var lo gc.Node
var hi gc.Node
split64(&nt, &lo, &hi)
gmove(&lo, &n1)
splitclean()
}
} else {
var p1 *obj.Prog
if nr.Type.Width > 4 {
// delayed reg alloc
gc.Nodreg(&n1, gc.Types[gc.TUINT32], x86.REG_CX)
gc.Regalloc(&n1, gc.Types[gc.TUINT32], &n1) // to hold the shift type in CX
var lo gc.Node
var hi gc.Node
split64(&nt, &lo, &hi)
gmove(&lo, &n1)
gins(optoas(gc.OCMP, gc.Types[gc.TUINT32]), &hi, ncon(0))
p2 := gc.Gbranch(optoas(gc.ONE, gc.Types[gc.TUINT32]), nil, +1)
gins(optoas(gc.OCMP, gc.Types[gc.TUINT32]), &n1, ncon(uint32(w)))
p1 = gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TUINT32]), nil, +1)
splitclean()
gc.Patch(p2, gc.Pc)
} else {
gins(optoas(gc.OCMP, nr.Type), &n1, ncon(uint32(w)))
p1 = gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TUINT32]), nil, +1)
}
if op == gc.ORSH && gc.Issigned[nl.Type.Etype] {
gins(a, ncon(uint32(w)-1), &n2)
} else {
gmove(ncon(0), &n2)
}
gc.Patch(p1, gc.Pc)
}
gins(a, &n1, &n2)
if oldcx.Op != 0 {
gmove(&oldcx, &cx)
}
gmove(&n2, res)
gc.Regfree(&n1)
gc.Regfree(&n2)
}
/*
* generate division.
* caller must set:
* ax = allocated AX register
* dx = allocated DX register
* generates one of:
* res = nl / nr
* res = nl % nr
* according to op.
*/
func dodiv(op int, nl *gc.Node, nr *gc.Node, res *gc.Node, ax *gc.Node, dx *gc.Node) {
// Have to be careful about handling
// most negative int divided by -1 correctly.
// The hardware will trap.
// Also the byte divide instruction needs AH,
// which we otherwise don't have to deal with.
// Easiest way to avoid for int8, int16: use int32.
// For int32 and int64, use explicit test.
// Could use int64 hw for int32.
t := nl.Type
t0 := t
check := 0
if gc.Issigned[t.Etype] {
check = 1
if gc.Isconst(nl, gc.CTINT) && gc.Mpgetfix(nl.Val.U.Xval) != -1<<uint64(t.Width*8-1) {
check = 0
} else if gc.Isconst(nr, gc.CTINT) && gc.Mpgetfix(nr.Val.U.Xval) != -1 {
check = 0
}
}
if t.Width < 4 {
if gc.Issigned[t.Etype] {
t = gc.Types[gc.TINT32]
} else {
t = gc.Types[gc.TUINT32]
}
check = 0
}
var t1 gc.Node
gc.Tempname(&t1, t)
var t2 gc.Node
gc.Tempname(&t2, t)
if t0 != t {
var t3 gc.Node
gc.Tempname(&t3, t0)
var t4 gc.Node
gc.Tempname(&t4, t0)
gc.Cgen(nl, &t3)
gc.Cgen(nr, &t4)
// Convert.
gmove(&t3, &t1)
gmove(&t4, &t2)
} else {
gc.Cgen(nl, &t1)
gc.Cgen(nr, &t2)
}
var n1 gc.Node
if !gc.Samereg(ax, res) && !gc.Samereg(dx, res) {
gc.Regalloc(&n1, t, res)
} else {
gc.Regalloc(&n1, t, nil)
}
gmove(&t2, &n1)
gmove(&t1, ax)
var p2 *obj.Prog
var n4 gc.Node
if gc.Nacl {
// Native Client does not relay the divide-by-zero trap
// to the executing program, so we must insert a check
// for ourselves.
gc.Nodconst(&n4, t, 0)
gins(optoas(gc.OCMP, t), &n1, &n4)
p1 := gc.Gbranch(optoas(gc.ONE, t), nil, +1)
if panicdiv == nil {
panicdiv = gc.Sysfunc("panicdivide")
}
gc.Ginscall(panicdiv, -1)
gc.Patch(p1, gc.Pc)
}
if check != 0 {
gc.Nodconst(&n4, t, -1)
gins(optoas(gc.OCMP, t), &n1, &n4)
p1 := gc.Gbranch(optoas(gc.ONE, t), nil, +1)
if op == gc.ODIV {
// a / (-1) is -a.
gins(optoas(gc.OMINUS, t), nil, ax)
gmove(ax, res)
} else {
// a % (-1) is 0.
gc.Nodconst(&n4, t, 0)
gmove(&n4, res)
}
p2 = gc.Gbranch(obj.AJMP, nil, 0)
gc.Patch(p1, gc.Pc)
}
if !gc.Issigned[t.Etype] {
var nz gc.Node
gc.Nodconst(&nz, t, 0)
gmove(&nz, dx)
} else {
gins(optoas(gc.OEXTEND, t), nil, nil)
}
gins(optoas(op, t), &n1, nil)
gc.Regfree(&n1)
if op == gc.ODIV {
gmove(ax, res)
} else {
gmove(dx, res)
}
if check != 0 {
gc.Patch(p2, gc.Pc)
}
}
/*
* generate shift according to op, one of:
* res = nl << nr
* res = nl >> nr
*/
func cgen_shift(op int, bounded bool, nl *gc.Node, nr *gc.Node, res *gc.Node) {
a := optoas(op, nl.Type)
if nr.Op == gc.OLITERAL {
var n1 gc.Node
gc.Regalloc(&n1, nl.Type, res)
gc.Cgen(nl, &n1)
sc := uint64(gc.Mpgetfix(nr.Val.U.Xval))
if sc >= uint64(nl.Type.Width*8) {
// large shift gets 2 shifts by width-1
var n3 gc.Node
gc.Nodconst(&n3, gc.Types[gc.TUINT32], nl.Type.Width*8-1)
gins(a, &n3, &n1)
gins(a, &n3, &n1)
} else {
gins(a, nr, &n1)
}
gmove(&n1, res)
gc.Regfree(&n1)
return
}
if nl.Ullman >= gc.UINF {
var n4 gc.Node
gc.Tempname(&n4, nl.Type)
gc.Cgen(nl, &n4)
nl = &n4
}
if nr.Ullman >= gc.UINF {
var n5 gc.Node
gc.Tempname(&n5, nr.Type)
gc.Cgen(nr, &n5)
nr = &n5
}
rcx := int(reg[x86.REG_CX])
var n1 gc.Node
gc.Nodreg(&n1, gc.Types[gc.TUINT32], x86.REG_CX)
// Allow either uint32 or uint64 as shift type,
// to avoid unnecessary conversion from uint32 to uint64
// just to do the comparison.
tcount := gc.Types[gc.Simtype[nr.Type.Etype]]
if tcount.Etype < gc.TUINT32 {
tcount = gc.Types[gc.TUINT32]
}
gc.Regalloc(&n1, nr.Type, &n1) // to hold the shift type in CX
var n3 gc.Node
gc.Regalloc(&n3, tcount, &n1) // to clear high bits of CX
var cx gc.Node
gc.Nodreg(&cx, gc.Types[gc.TUINT64], x86.REG_CX)
var oldcx gc.Node
if rcx > 0 && !gc.Samereg(&cx, res) {
gc.Regalloc(&oldcx, gc.Types[gc.TUINT64], nil)
gmove(&cx, &oldcx)
}
cx.Type = tcount
var n2 gc.Node
if gc.Samereg(&cx, res) {
gc.Regalloc(&n2, nl.Type, nil)
} else {
gc.Regalloc(&n2, nl.Type, res)
}
if nl.Ullman >= nr.Ullman {
gc.Cgen(nl, &n2)
gc.Cgen(nr, &n1)
gmove(&n1, &n3)
} else {
gc.Cgen(nr, &n1)
gmove(&n1, &n3)
gc.Cgen(nl, &n2)
}
gc.Regfree(&n3)
// test and fix up large shifts
if !bounded {
gc.Nodconst(&n3, tcount, nl.Type.Width*8)
gins(optoas(gc.OCMP, tcount), &n1, &n3)
p1 := gc.Gbranch(optoas(gc.OLT, tcount), nil, +1)
if op == gc.ORSH && gc.Issigned[nl.Type.Etype] {
gc.Nodconst(&n3, gc.Types[gc.TUINT32], nl.Type.Width*8-1)
gins(a, &n3, &n2)
} else {
gc.Nodconst(&n3, nl.Type, 0)
gmove(&n3, &n2)
}
gc.Patch(p1, gc.Pc)
}
gins(a, &n1, &n2)
if oldcx.Op != 0 {
cx.Type = gc.Types[gc.TUINT64]
gmove(&oldcx, &cx)
gc.Regfree(&oldcx)
}
gmove(&n2, res)
gc.Regfree(&n1)
gc.Regfree(&n2)
}