func testExceedMaxStreamsLimit(t *testing.T, e env) {
// Only allows 1 live stream per server transport.
s, cc := setUp(nil, 1, "", e)
tc := testpb.NewTestServiceClient(cc)
defer tearDown(s, cc)
done := make(chan struct{})
ch := make(chan int)
go func() {
for {
select {
case <-time.After(5 * time.Millisecond):
ch <- 0
case <-time.After(5 * time.Second):
close(done)
return
}
}
}()
// Loop until a stream creation hangs due to the new max stream setting.
for {
select {
case <-ch:
ctx, _ := context.WithTimeout(context.Background(), time.Second)
if _, err := tc.StreamingInputCall(ctx); err != nil {
if grpc.Code(err) == codes.DeadlineExceeded {
return
}
t.Fatalf("%v.StreamingInputCall(_) = %v, want <nil>", tc, err)
}
case <-done:
t.Fatalf("Client has not received the max stream setting in 5 seconds.")
}
}
}
func testTimeoutOnDeadServer(t *testing.T, e env) {
s, cc := setUp(nil, math.MaxUint32, "", e)
tc := testpb.NewTestServiceClient(cc)
if ok := cc.WaitForStateChange(time.Second, grpc.Idle); !ok {
t.Fatalf("cc.WaitForStateChange(_, %s) = %t, want true", grpc.Idle, ok)
}
if ok := cc.WaitForStateChange(time.Second, grpc.Connecting); !ok {
t.Fatalf("cc.WaitForStateChange(_, %s) = %t, want true", grpc.Connecting, ok)
}
if cc.State() != grpc.Ready {
t.Fatalf("cc.State() = %s, want %s", cc.State(), grpc.Ready)
}
if ok := cc.WaitForStateChange(time.Millisecond, grpc.Ready); ok {
t.Fatalf("cc.WaitForStateChange(_, %s) = %t, want false", grpc.Ready, ok)
}
s.Stop()
// Set -1 as the timeout to make sure if transportMonitor gets error
// notification in time the failure path of the 1st invoke of
// ClientConn.wait hits the deadline exceeded error.
ctx, _ := context.WithTimeout(context.Background(), -1)
if _, err := tc.EmptyCall(ctx, &testpb.Empty{}); grpc.Code(err) != codes.DeadlineExceeded {
t.Fatalf("TestService/EmptyCall(%v, _) = _, error %v, want _, error code: %d", ctx, err, codes.DeadlineExceeded)
}
if ok := cc.WaitForStateChange(time.Second, grpc.Ready); !ok {
t.Fatalf("cc.WaitForStateChange(_, %s) = %t, want true", grpc.Ready, ok)
}
state := cc.State()
if state != grpc.Connecting && state != grpc.TransientFailure {
t.Fatalf("cc.State() = %s, want %s or %s", state, grpc.Connecting, grpc.TransientFailure)
}
cc.Close()
}
func healthCheck(t time.Duration, cc *grpc.ClientConn, serviceName string) (*healthpb.HealthCheckResponse, error) {
ctx, _ := context.WithTimeout(context.Background(), t)
hc := healthpb.NewHealthCheckClient(cc)
req := &healthpb.HealthCheckRequest{
Service: serviceName,
}
return hc.Check(ctx, req)
}
func ExampleWithTimeout() {
// Pass a context with a timeout to tell a blocking function that it
// should abandon its work after the timeout elapses.
ctx, _ := context.WithTimeout(context.Background(), 100*time.Millisecond)
select {
case <-time.After(200 * time.Millisecond):
fmt.Println("overslept")
case <-ctx.Done():
fmt.Println(ctx.Err()) // prints "context deadline exceeded"
}
// Output:
// context deadline exceeded
}
// TODO(zhaoq): Have a better test coverage of timeout and cancellation mechanism.
func testRPCTimeout(t *testing.T, e env) {
s, cc := setUp(nil, math.MaxUint32, "", e)
tc := testpb.NewTestServiceClient(cc)
defer tearDown(s, cc)
argSize := 2718
respSize := 314
req := &testpb.SimpleRequest{
ResponseType: testpb.PayloadType_COMPRESSABLE.Enum(),
ResponseSize: proto.Int32(int32(respSize)),
Payload: newPayload(testpb.PayloadType_COMPRESSABLE, int32(argSize)),
}
for i := -1; i <= 10; i++ {
ctx, _ := context.WithTimeout(context.Background(), time.Duration(i)*time.Millisecond)
reply, err := tc.UnaryCall(ctx, req)
if grpc.Code(err) != codes.DeadlineExceeded {
t.Fatalf(`TestService/UnaryCallv(_, _) = %v, %v; want <nil>, error code: %d`, reply, err, codes.DeadlineExceeded)
}
}
}
func TestLargeMessageSuspension(t *testing.T) {
server, ct := setUp(t, 0, math.MaxUint32, suspended)
callHdr := &CallHdr{
Host: "localhost",
Method: "foo.Large",
}
// Set a long enough timeout for writing a large message out.
ctx, _ := context.WithTimeout(context.Background(), time.Second)
s, err := ct.NewStream(ctx, callHdr)
if err != nil {
t.Fatalf("failed to open stream: %v", err)
}
// Write should not be done successfully due to flow control.
err = ct.Write(s, expectedRequestLarge, &Options{Last: true, Delay: false})
expectedErr := StreamErrorf(codes.DeadlineExceeded, "%v", context.DeadlineExceeded)
if err == nil || err != expectedErr {
t.Fatalf("Write got %v, want %v", err, expectedErr)
}
ct.Close()
server.stop()
}
func doTimeoutOnSleepingServer(tc testpb.TestServiceClient) {
ctx, _ := context.WithTimeout(context.Background(), 1*time.Millisecond)
stream, err := tc.FullDuplexCall(ctx)
if err != nil {
if grpc.Code(err) == codes.DeadlineExceeded {
grpclog.Println("TimeoutOnSleepingServer done")
return
}
grpclog.Fatalf("%v.FullDuplexCall(_) = _, %v", tc, err)
}
pl := newPayload(testpb.PayloadType_COMPRESSABLE, 27182)
req := &testpb.StreamingOutputCallRequest{
ResponseType: testpb.PayloadType_COMPRESSABLE.Enum(),
Payload: pl,
}
if err := stream.Send(req); err != nil {
grpclog.Fatalf("%v.Send(%v) = %v", stream, req, err)
}
if _, err := stream.Recv(); grpc.Code(err) != codes.DeadlineExceeded {
grpclog.Fatalf("%v.Recv() = _, %v, want error code %d", stream, err, codes.DeadlineExceeded)
}
grpclog.Println("TimeoutOnSleepingServer done")
}
// operateHeader takes action on the decoded headers. It returns the current
// stream if there are remaining headers on the wire (in the following
// Continuation frame).
func (t *http2Server) operateHeaders(hDec *hpackDecoder, s *Stream, frame headerFrame, endStream bool, handle func(*Stream), wg *sync.WaitGroup) (pendingStream *Stream) {
defer func() {
if pendingStream == nil {
hDec.state = decodeState{}
}
}()
endHeaders, err := hDec.decodeServerHTTP2Headers(frame)
if s == nil {
// s has been closed.
return nil
}
if err != nil {
grpclog.Printf("transport: http2Server.operateHeader found %v", err)
if se, ok := err.(StreamError); ok {
t.controlBuf.put(&resetStream{s.id, statusCodeConvTab[se.Code]})
}
return nil
}
if endStream {
// s is just created by the caller. No lock needed.
s.state = streamReadDone
}
if !endHeaders {
return s
}
t.mu.Lock()
if t.state != reachable {
t.mu.Unlock()
return nil
}
if uint32(len(t.activeStreams)) >= t.maxStreams {
t.mu.Unlock()
t.controlBuf.put(&resetStream{s.id, http2.ErrCodeRefusedStream})
return nil
}
s.sendQuotaPool = newQuotaPool(int(t.streamSendQuota))
t.activeStreams[s.id] = s
t.mu.Unlock()
s.windowHandler = func(n int) {
t.updateWindow(s, uint32(n))
}
if hDec.state.timeoutSet {
s.ctx, s.cancel = context.WithTimeout(context.TODO(), hDec.state.timeout)
} else {
s.ctx, s.cancel = context.WithCancel(context.TODO())
}
// Attach Auth info if there is any.
if t.authInfo != nil {
s.ctx = credentials.NewContext(s.ctx, t.authInfo)
}
// Cache the current stream to the context so that the server application
// can find out. Required when the server wants to send some metadata
// back to the client (unary call only).
s.ctx = newContextWithStream(s.ctx, s)
// Attach the received metadata to the context.
if len(hDec.state.mdata) > 0 {
s.ctx = metadata.NewContext(s.ctx, hDec.state.mdata)
}
s.dec = &recvBufferReader{
ctx: s.ctx,
recv: s.buf,
}
s.method = hDec.state.method
wg.Add(1)
go func() {
handle(s)
wg.Done()
}()
return nil
}
