// withSafeTTYAndInterrupts invokes the provided function after the terminal
// state has been stored, and then on any error or termination attempts to
// restore the terminal state to its prior behavior. It also eats signals
// for the duration of the function.
func withSafeTTYAndInterrupts(fn func() error) error {
ch := make(chan os.Signal, 1)
signal.Notify(ch, childSignals...)
defer signal.Stop(ch)
inFd := os.Stdin.Fd()
if !term.IsTerminal(inFd) {
if f, err := os.Open("/dev/tty"); err == nil {
defer f.Close()
inFd = f.Fd()
}
}
if term.IsTerminal(inFd) {
state, err := term.SaveState(inFd)
if err != nil {
return err
}
go func() {
if _, ok := <-ch; !ok {
return
}
term.RestoreTerminal(inFd, state)
}()
defer term.RestoreTerminal(inFd, state)
return fn()
}
return fn()
}
// PromptForPasswordString prompts for user input by disabling echo in terminal, useful for password prompt.
func PromptForPasswordString(r io.Reader, w io.Writer, format string, a ...interface{}) string {
if w == nil {
w = os.Stdout
}
if file, ok := r.(*os.File); ok {
inFd := file.Fd()
if term.IsTerminal(inFd) {
oldState, err := term.SaveState(inFd)
if err != nil {
glog.V(3).Infof("Unable to save terminal state")
return PromptForString(r, w, format, a...)
}
fmt.Fprintf(w, format, a...)
term.DisableEcho(inFd, oldState)
input := readInput(r)
defer term.RestoreTerminal(inFd, oldState)
fmt.Fprintf(w, "\n")
return input
}
glog.V(3).Infof("Stdin is not a terminal")
return PromptForString(r, w, format, a...)
}
return PromptForString(r, w, format, a...)
}
// Safe invokes the provided function and will attempt to ensure that when the
// function returns (or a termination signal is sent) that the terminal state
// is reset to the condition it was in prior to the function being invoked. If
// t.Raw is true the terminal will be put into raw mode prior to calling the function.
// If the input file descriptor is not a TTY and TryDev is true, the /dev/tty file
// will be opened (if available).
func (t TTY) Safe(fn SafeFunc) error {
in := t.In
var hasFd bool
var inFd uintptr
if desc, ok := in.(fd); ok && in != nil {
inFd = desc.Fd()
hasFd = true
}
if t.TryDev && (!hasFd || !term.IsTerminal(inFd)) {
if f, err := os.Open("/dev/tty"); err == nil {
defer f.Close()
inFd = f.Fd()
hasFd = true
}
}
if !hasFd || !term.IsTerminal(inFd) {
return fn()
}
var state *term.State
var err error
if t.Raw {
state, err = term.MakeRaw(inFd)
} else {
state, err = term.SaveState(inFd)
}
if err != nil {
return err
}
return interrupt.Chain(t.Parent, func() { term.RestoreTerminal(inFd, state) }).Run(fn)
}
// Safe invokes the provided function and will attempt to ensure that when the
// function returns (or a termination signal is sent) that the terminal state
// is reset to the condition it was in prior to the function being invoked. If
// t.Raw is true the terminal will be put into raw mode prior to calling the function.
// If the input file descriptor is not a TTY and TryDev is true, the /dev/tty file
// will be opened (if available).
func (t TTY) Safe(fn SafeFunc) error {
inFd, isTerminal := term.GetFdInfo(t.In)
if !isTerminal && t.TryDev {
if f, err := os.Open("/dev/tty"); err == nil {
defer f.Close()
inFd = f.Fd()
isTerminal = term.IsTerminal(inFd)
}
}
if !isTerminal {
return fn()
}
var state *term.State
var err error
if t.Raw {
state, err = term.MakeRaw(inFd)
} else {
state, err = term.SaveState(inFd)
}
if err != nil {
return err
}
return interrupt.Chain(t.Parent, func() {
if t.sizeQueue != nil {
t.sizeQueue.stop()
}
term.RestoreTerminal(inFd, state)
}).Run(fn)
}
func (cli *DockerCli) configureAuth(flUser, flPassword, serverAddress string, isDefaultRegistry bool) (types.AuthConfig, error) {
authconfig, err := getCredentials(cli.configFile, serverAddress)
if err != nil {
return authconfig, err
}
// Some links documenting this:
// - https://code.google.com/archive/p/mintty/issues/56
// - https://github.com/docker/docker/issues/15272
// - https://mintty.github.io/ (compatibility)
// Linux will hit this if you attempt `cat | docker login`, and Windows
// will hit this if you attempt docker login from mintty where stdin
// is a pipe, not a character based console.
if flPassword == "" && !cli.isTerminalIn {
return authconfig, fmt.Errorf("Error: Cannot perform an interactive logon from a non TTY device")
}
authconfig.Username = strings.TrimSpace(authconfig.Username)
if flUser = strings.TrimSpace(flUser); flUser == "" {
if isDefaultRegistry {
// if this is a defauly registry (docker hub), then display the following message.
fmt.Fprintln(cli.out, "Login with your Docker ID to push and pull images from Docker Hub. If you don't have a Docker ID, head over to https://hub.docker.com to create one.")
}
cli.promptWithDefault("Username", authconfig.Username)
flUser = readInput(cli.in, cli.out)
flUser = strings.TrimSpace(flUser)
if flUser == "" {
flUser = authconfig.Username
}
}
if flUser == "" {
return authconfig, fmt.Errorf("Error: Non-null Username Required")
}
if flPassword == "" {
oldState, err := term.SaveState(cli.inFd)
if err != nil {
return authconfig, err
}
fmt.Fprintf(cli.out, "Password: "******"\n")
term.RestoreTerminal(cli.inFd, oldState)
if flPassword == "" {
return authconfig, fmt.Errorf("Error: Password Required")
}
}
authconfig.Username = flUser
authconfig.Password = flPassword
authconfig.ServerAddress = serverAddress
authconfig.IdentityToken = ""
return authconfig, nil
}
func (cli *DockerCli) configureAuth(flUser, flPassword, flEmail, serverAddress string) (types.AuthConfig, error) {
authconfig, ok := cli.configFile.AuthConfigs[serverAddress]
if !ok {
authconfig = types.AuthConfig{}
}
if flUser == "" {
cli.promptWithDefault("Username", authconfig.Username)
flUser = readInput(cli.in, cli.out)
flUser = strings.TrimSpace(flUser)
if flUser == "" {
flUser = authconfig.Username
}
}
if flPassword == "" {
oldState, err := term.SaveState(cli.inFd)
if err != nil {
return authconfig, err
}
fmt.Fprintf(cli.out, "Password: "******"\n")
term.RestoreTerminal(cli.inFd, oldState)
if flPassword == "" {
return authconfig, fmt.Errorf("Error : Password Required")
}
}
// Assume that a different username means they may not want to use
// the email from the config file, so prompt it
if flUser != authconfig.Username {
if flEmail == "" {
cli.promptWithDefault("Email", authconfig.Email)
flEmail = readInput(cli.in, cli.out)
if flEmail == "" {
flEmail = authconfig.Email
}
}
} else {
// However, if they don't override the username use the
// email from the cmd line if specified. IOW, allow
// then to change/override them. And if not specified, just
// use what's in the config file
if flEmail == "" {
flEmail = authconfig.Email
}
}
authconfig.Username = flUser
authconfig.Password = flPassword
authconfig.Email = flEmail
authconfig.ServerAddress = serverAddress
cli.configFile.AuthConfigs[serverAddress] = authconfig
return authconfig, nil
}
func (cli *DockerCli) configureAuth(flUser, flPassword, serverAddress string, isDefaultRegistry bool) (types.AuthConfig, error) {
authconfig, err := getCredentials(cli.configFile, serverAddress)
if err != nil {
return authconfig, err
}
authconfig.Username = strings.TrimSpace(authconfig.Username)
if flUser = strings.TrimSpace(flUser); flUser == "" {
if isDefaultRegistry {
// if this is a defauly registry (docker hub), then display the following message.
fmt.Fprintln(cli.out, "Login with your Docker ID to push and pull images from Docker Hub. If you don't have a Docker ID, head over to https://hub.docker.com to create one.")
}
cli.promptWithDefault("Username", authconfig.Username)
flUser = readInput(cli.in, cli.out)
flUser = strings.TrimSpace(flUser)
if flUser == "" {
flUser = authconfig.Username
}
}
if flUser == "" {
return authconfig, fmt.Errorf("Error: Non-null Username Required")
}
if flPassword == "" {
oldState, err := term.SaveState(cli.inFd)
if err != nil {
return authconfig, err
}
fmt.Fprintf(cli.out, "Password: "******"\n")
term.RestoreTerminal(cli.inFd, oldState)
if flPassword == "" {
return authconfig, fmt.Errorf("Error: Password Required")
}
}
authconfig.Username = flUser
authconfig.Password = flPassword
authconfig.ServerAddress = serverAddress
authconfig.IdentityToken = ""
return authconfig, nil
}
func (p *process) startInteractive() error {
f, err := pty.Start(p.cmd)
if err != nil {
return err
}
p.pty = f
if p.wire.Input == os.Stdin {
// the current terminal shall pass everything to the console, make it ignores ctrl+C etc ...
// this is done by making the terminal raw. The state is saved to reset user's terminal settings
// when dock exits
state, err := term.SetRawTerminal(os.Stdin.Fd())
if err != nil {
return err
}
p.termState = &termState{
state: state,
fd: os.Stdin.Fd(),
}
} else {
// wire.Input is a socket (tcp, tls ...). Obvioulsy, we can't set the remote user's terminal in raw mode, however we can at least
// disable echo on the console
state, err := term.SaveState(p.pty.Fd())
if err != nil {
return err
}
if err := term.DisableEcho(p.pty.Fd(), state); err != nil {
return err
}
p.termState = &termState{
state: state,
fd: p.pty.Fd(),
}
}
p.resizePty()
go io.Copy(p.wire, f)
go io.Copy(f, p.wire)
return nil
}
func getPassphrase(role string, confirm bool) ([]byte, error) {
if pass := os.Getenv(fmt.Sprintf("TUF_%s_PASSPHRASE", strings.ToUpper(role))); pass != "" {
return []byte(pass), nil
}
state, err := term.SaveState(0)
if err != nil {
return nil, err
}
term.DisableEcho(0, state)
defer term.RestoreTerminal(0, state)
stdin := bufio.NewReader(os.Stdin)
fmt.Printf("Enter %s keys passphrase: ", role)
passphrase, err := stdin.ReadBytes('\n')
fmt.Println()
if err != nil {
return nil, err
}
passphrase = passphrase[0 : len(passphrase)-1]
if !confirm {
return passphrase, nil
}
fmt.Printf("Repeat %s keys passphrase: ", role)
confirmation, err := stdin.ReadBytes('\n')
fmt.Println()
if err != nil {
return nil, err
}
confirmation = confirmation[0 : len(confirmation)-1]
if !bytes.Equal(passphrase, confirmation) {
return nil, errors.New("The entered passphrases do not match")
}
return passphrase, nil
}
func (ps passwordStore) Basic(u *url.URL) (string, string) {
if ps.anonymous {
return "", ""
}
stdin := bufio.NewReader(os.Stdin)
fmt.Fprintf(os.Stdout, "Enter username: "******"error processing username input: %s", err)
return "", ""
}
username := strings.TrimSpace(string(userIn))
if term.IsTerminal(0) {
state, err := term.SaveState(0)
if err != nil {
logrus.Errorf("error saving terminal state, cannot retrieve password: %s", err)
return "", ""
}
term.DisableEcho(0, state)
defer term.RestoreTerminal(0, state)
}
fmt.Fprintf(os.Stdout, "Enter password: "******"error processing password input: %s", err)
return "", ""
}
password := strings.TrimSpace(string(userIn))
return username, password
}
// ConfigureAuth returns an AuthConfig from the specified user, password and server.
func ConfigureAuth(cli *DockerCli, flUser, flPassword, serverAddress string, isDefaultRegistry bool) (types.AuthConfig, error) {
// On Windows, force the use of the regular OS stdin stream. Fixes #14336/#14210
if runtime.GOOS == "windows" {
cli.in = NewInStream(os.Stdin)
}
if !isDefaultRegistry {
serverAddress = registry.ConvertToHostname(serverAddress)
}
authconfig, err := cli.CredentialsStore(serverAddress).Get(serverAddress)
if err != nil {
return authconfig, err
}
// Some links documenting this:
// - https://code.google.com/archive/p/mintty/issues/56
// - https://github.com/docker/docker/issues/15272
// - https://mintty.github.io/ (compatibility)
// Linux will hit this if you attempt `cat | docker login`, and Windows
// will hit this if you attempt docker login from mintty where stdin
// is a pipe, not a character based console.
if flPassword == "" && !cli.In().IsTerminal() {
return authconfig, fmt.Errorf("Error: Cannot perform an interactive login from a non TTY device")
}
authconfig.Username = strings.TrimSpace(authconfig.Username)
if flUser = strings.TrimSpace(flUser); flUser == "" {
if isDefaultRegistry {
// if this is a default registry (docker hub), then display the following message.
fmt.Fprintln(cli.Out(), "Login with your Docker ID to push and pull images from Docker Hub. If you don't have a Docker ID, head over to https://hub.docker.com to create one.")
}
promptWithDefault(cli.Out(), "Username", authconfig.Username)
flUser = readInput(cli.In(), cli.Out())
flUser = strings.TrimSpace(flUser)
if flUser == "" {
flUser = authconfig.Username
}
}
if flUser == "" {
return authconfig, fmt.Errorf("Error: Non-null Username Required")
}
if flPassword == "" {
oldState, err := term.SaveState(cli.In().FD())
if err != nil {
return authconfig, err
}
fmt.Fprintf(cli.Out(), "Password: "******"\n")
term.RestoreTerminal(cli.In().FD(), oldState)
if flPassword == "" {
return authconfig, fmt.Errorf("Error: Password Required")
}
}
authconfig.Username = flUser
authconfig.Password = flPassword
authconfig.ServerAddress = serverAddress
authconfig.IdentityToken = ""
return authconfig, nil
}
func (br *boundRetriever) requestPassphrase(keyName, alias string, createNew bool, numAttempts int) (string, bool, error) {
// Figure out if we should display a different string for this alias
displayAlias := alias
if val, ok := br.aliasMap[alias]; ok {
displayAlias = val
}
// If typing on the terminal, we do not want the terminal to echo the
// password that is typed (so it doesn't display)
if term.IsTerminal(os.Stdin.Fd()) {
state, err := term.SaveState(os.Stdin.Fd())
if err != nil {
return "", false, err
}
term.DisableEcho(os.Stdin.Fd(), state)
defer term.RestoreTerminal(os.Stdin.Fd(), state)
}
indexOfLastSeparator := strings.LastIndex(keyName, string(filepath.Separator))
if indexOfLastSeparator == -1 {
indexOfLastSeparator = 0
}
var shortName string
if len(keyName) > indexOfLastSeparator+idBytesToDisplay {
if indexOfLastSeparator > 0 {
keyNamePrefix := keyName[:indexOfLastSeparator]
keyNameID := keyName[indexOfLastSeparator+1 : indexOfLastSeparator+idBytesToDisplay+1]
shortName = keyNameID + " (" + keyNamePrefix + ")"
} else {
shortName = keyName[indexOfLastSeparator : indexOfLastSeparator+idBytesToDisplay]
}
}
withID := fmt.Sprintf(" with ID %s", shortName)
if shortName == "" {
withID = ""
}
switch {
case createNew:
fmt.Fprintf(br.out, "Enter passphrase for new %s key%s: ", displayAlias, withID)
case displayAlias == "yubikey":
fmt.Fprintf(br.out, "Enter the %s for the attached Yubikey: ", keyName)
default:
fmt.Fprintf(br.out, "Enter passphrase for %s key%s: ", displayAlias, withID)
}
stdin := bufio.NewReader(br.in)
passphrase, err := stdin.ReadBytes('\n')
fmt.Fprintln(br.out)
if err != nil {
return "", false, err
}
retPass := strings.TrimSpace(string(passphrase))
if createNew {
err = br.verifyAndConfirmPassword(stdin, retPass, displayAlias, withID)
if err != nil {
return "", false, err
}
}
br.cachePassword(alias, retPass)
return retPass, false, nil
}
func (*DockerTerm) SaveState(fd uintptr) (*term.State, error) {
return term.SaveState(fd)
}
// CmdLogin logs in or registers a user to a Docker registry service.
//
// If no server is specified, the user will be logged into or registered to the registry's index server.
//
// Usage: docker login SERVER
func (cli *DockerCli) CmdLogin(args ...string) error {
cmd := cli.Subcmd("login", []string{"[SERVER]"}, "Register or log in to a Docker registry server, if no server is\nspecified \""+registry.INDEXSERVER+"\" is the default.", true)
cmd.Require(flag.Max, 1)
var username, password, email string
cmd.StringVar(&username, []string{"u", "-username"}, "", "Username")
cmd.StringVar(&password, []string{"p", "-password"}, "", "Password")
cmd.StringVar(&email, []string{"e", "-email"}, "", "Email")
cmd.ParseFlags(args, true)
serverAddress := registry.INDEXSERVER
if len(cmd.Args()) > 0 {
serverAddress = cmd.Arg(0)
}
promptDefault := func(prompt string, configDefault string) {
if configDefault == "" {
fmt.Fprintf(cli.out, "%s: ", prompt)
} else {
fmt.Fprintf(cli.out, "%s (%s): ", prompt, configDefault)
}
}
readInput := func(in io.Reader, out io.Writer) string {
reader := bufio.NewReader(in)
line, _, err := reader.ReadLine()
if err != nil {
fmt.Fprintln(out, err.Error())
os.Exit(1)
}
return string(line)
}
authconfig, ok := cli.configFile.AuthConfigs[serverAddress]
if !ok {
authconfig = cliconfig.AuthConfig{}
}
if username == "" {
promptDefault("Username", authconfig.Username)
username = readInput(cli.in, cli.out)
username = strings.Trim(username, " ")
if username == "" {
username = authconfig.Username
}
}
// Assume that a different username means they may not want to use
// the password or email from the config file, so prompt them
if username != authconfig.Username {
if password == "" {
oldState, err := term.SaveState(cli.inFd)
if err != nil {
return err
}
fmt.Fprintf(cli.out, "Password: "******"\n")
term.RestoreTerminal(cli.inFd, oldState)
if password == "" {
return fmt.Errorf("Error : Password Required")
}
}
if email == "" {
promptDefault("Email", authconfig.Email)
email = readInput(cli.in, cli.out)
if email == "" {
email = authconfig.Email
}
}
} else {
// However, if they don't override the username use the
// password or email from the cmd line if specified. IOW, allow
// then to change/override them. And if not specified, just
// use what's in the config file
if password == "" {
password = authconfig.Password
}
if email == "" {
email = authconfig.Email
}
}
authconfig.Username = username
authconfig.Password = password
authconfig.Email = email
authconfig.ServerAddress = serverAddress
cli.configFile.AuthConfigs[serverAddress] = authconfig
serverResp, err := cli.call("POST", "/auth", cli.configFile.AuthConfigs[serverAddress], nil)
if serverResp.statusCode == 401 {
delete(cli.configFile.AuthConfigs, serverAddress)
if err2 := cli.configFile.Save(); err2 != nil {
fmt.Fprintf(cli.out, "WARNING: could not save config file: %v\n", err2)
}
return err
}
if err != nil {
return err
}
defer serverResp.body.Close()
var response types.AuthResponse
if err := json.NewDecoder(serverResp.body).Decode(&response); err != nil {
// Upon error, remove entry
delete(cli.configFile.AuthConfigs, serverAddress)
return err
}
if err := cli.configFile.Save(); err != nil {
return fmt.Errorf("Error saving config file: %v", err)
}
fmt.Fprintf(cli.out, "WARNING: login credentials saved in %s\n", cli.configFile.Filename())
if response.Status != "" {
fmt.Fprintf(cli.out, "%s\n", response.Status)
}
return nil
}
// PromptRetrieverWithInOut returns a new Retriever which will provide a
// prompt using the given in and out readers. The passphrase will be cached
// such that subsequent prompts will produce the same passphrase.
// aliasMap can be used to specify display names for TUF key aliases. If aliasMap
// is nil, a sensible default will be used.
func PromptRetrieverWithInOut(in io.Reader, out io.Writer, aliasMap map[string]string) Retriever {
userEnteredTargetsSnapshotsPass := false
targetsSnapshotsPass := ""
userEnteredRootsPass := false
rootsPass := ""
return func(keyName string, alias string, createNew bool, numAttempts int) (string, bool, error) {
if alias == tufRootAlias && createNew && numAttempts == 0 {
fmt.Fprintln(out, tufRootKeyGenerationWarning)
}
if numAttempts > 0 {
if !createNew {
fmt.Fprintln(out, "Passphrase incorrect. Please retry.")
}
}
// Figure out if we should display a different string for this alias
displayAlias := alias
if aliasMap != nil {
if val, ok := aliasMap[alias]; ok {
displayAlias = val
}
}
// First, check if we have a password cached for this alias.
if numAttempts == 0 {
if userEnteredTargetsSnapshotsPass && (alias == tufSnapshotAlias || alias == tufTargetsAlias) {
return targetsSnapshotsPass, false, nil
}
if userEnteredRootsPass && (alias == "root") {
return rootsPass, false, nil
}
}
if numAttempts > 3 && !createNew {
return "", true, ErrTooManyAttempts
}
state, err := term.SaveState(0)
if err != nil {
return "", false, err
}
term.DisableEcho(0, state)
defer term.RestoreTerminal(0, state)
stdin := bufio.NewReader(in)
indexOfLastSeparator := strings.LastIndex(keyName, string(filepath.Separator))
if indexOfLastSeparator == -1 {
indexOfLastSeparator = 0
}
var shortName string
if len(keyName) > indexOfLastSeparator+idBytesToDisplay {
if indexOfLastSeparator > 0 {
keyNamePrefix := keyName[:indexOfLastSeparator]
keyNameID := keyName[indexOfLastSeparator+1 : indexOfLastSeparator+idBytesToDisplay+1]
shortName = keyNameID + " (" + keyNamePrefix + ")"
} else {
shortName = keyName[indexOfLastSeparator : indexOfLastSeparator+idBytesToDisplay]
}
}
withID := fmt.Sprintf(" with ID %s", shortName)
if shortName == "" {
withID = ""
}
if createNew {
fmt.Fprintf(out, "Enter passphrase for new %s key%s: ", displayAlias, withID)
} else if displayAlias == "yubikey" {
fmt.Fprintf(out, "Enter the %s for the attached Yubikey: ", keyName)
} else {
fmt.Fprintf(out, "Enter passphrase for %s key%s: ", displayAlias, withID)
}
passphrase, err := stdin.ReadBytes('\n')
fmt.Fprintln(out)
if err != nil {
return "", false, err
}
retPass := strings.TrimSpace(string(passphrase))
if !createNew {
if alias == tufSnapshotAlias || alias == tufTargetsAlias {
userEnteredTargetsSnapshotsPass = true
targetsSnapshotsPass = retPass
}
if alias == tufRootAlias {
userEnteredRootsPass = true
rootsPass = retPass
}
return retPass, false, nil
}
if len(retPass) < 8 {
fmt.Fprintln(out, "Passphrase is too short. Please use a password manager to generate and store a good random passphrase.")
return "", false, ErrTooShort
}
fmt.Fprintf(out, "Repeat passphrase for new %s key%s: ", displayAlias, withID)
confirmation, err := stdin.ReadBytes('\n')
fmt.Fprintln(out)
if err != nil {
return "", false, err
}
confirmationStr := strings.TrimSpace(string(confirmation))
if retPass != confirmationStr {
fmt.Fprintln(out, "Passphrases do not match. Please retry.")
return "", false, ErrDontMatch
}
if alias == tufSnapshotAlias || alias == tufTargetsAlias {
userEnteredTargetsSnapshotsPass = true
targetsSnapshotsPass = retPass
}
if alias == tufRootAlias {
userEnteredRootsPass = true
rootsPass = retPass
}
return retPass, false, nil
}
}
// Decrypt a io.Reader with the given secretKeyring.
// You can optionally pass a defaultGPGKey to use for the
// decryption, otherwise it will use the first entity.
func Decrypt(f io.Reader, secretKeyring, defaultGPGKey string) (io.Reader, error) {
// Open the private key file
keyringFileBuffer, err := os.Open(secretKeyring)
if err != nil {
return nil, err
}
defer keyringFileBuffer.Close()
entityList, err := openpgp.ReadKeyRing(keyringFileBuffer)
if err != nil {
return nil, err
}
var entity *openpgp.Entity
if defaultGPGKey != "" {
// loop through their keys until we find the one they want
var foundKey bool
for _, e := range entityList {
// we can match on the fingerprint or the keyid because
// why not? I bet no one knows the difference
if e.PrimaryKey.KeyIdString() == defaultGPGKey ||
e.PrimaryKey.KeyIdShortString() == defaultGPGKey ||
fmt.Sprintf("%X", e.PrimaryKey.Fingerprint) == defaultGPGKey {
foundKey = true
entity = e
break
}
}
if !foundKey {
// we didn't find the key they specified
return nil, fmt.Errorf("Could not find private GPG Key with id: %s", defaultGPGKey)
}
} else {
// they didn't set a default key
// so let's hope it is the first one :/
// TODO(jessfraz): maybe prompt here if they have
// more than one private key
entity = entityList[0]
}
var identityString string
for _, identity := range entity.Identities {
identityString = fmt.Sprintf(" %s [%s]", identity.Name, entity.PrimaryKey.KeyIdString())
break
}
// Get the passphrase and read the private key.
// Have not touched the encrypted string yet
stdin, _, stderr := term.StdStreams()
stdinFd, _ := term.GetFdInfo(stdin)
oldState, err := term.SaveState(stdinFd)
if err != nil {
return nil, err
}
// prompt for passphrase
fmt.Fprintf(stderr, "GPG Passphrase for key%s: ", identityString)
term.DisableEcho(stdinFd, oldState)
// read what they inputed
passphrase := readInput(stdin, stderr)
fmt.Fprint(stderr, "\n\n")
// restore the terminal
term.RestoreTerminal(stdinFd, oldState)
logrus.Debugln("Decrypting private key using passphrase")
entity.PrivateKey.Decrypt(passphrase)
for _, subkey := range entity.Subkeys {
subkey.PrivateKey.Decrypt(passphrase)
}
logrus.Debugln("Finished decrypting private key using passphrase")
// base64 decode
dec := base64.NewDecoder(base64.StdEncoding, f)
// Decrypt it with the contents of the private key
md, err := openpgp.ReadMessage(dec, entityList, nil, nil)
if err != nil {
return nil, fmt.Errorf("GPG ReadMessage failed: %v", err)
}
// return the body contents
return md.UnverifiedBody, nil
}
// PromptRetrieverWithInOut returns a new Retriever which will provide a
// prompt using the given in and out readers. The passphrase will be cached
// such that subsequent prompts will produce the same passphrase.
func PromptRetrieverWithInOut(in io.Reader, out io.Writer) Retriever {
userEnteredTargetsSnapshotsPass := false
targetsSnapshotsPass := ""
userEnteredRootsPass := false
rootsPass := ""
return func(keyName string, alias string, createNew bool, numAttempts int) (string, bool, error) {
if alias == tufRootAlias && createNew && numAttempts == 0 {
fmt.Fprintln(out, tufRootKeyGenerationWarning)
}
if numAttempts > 0 {
if createNew {
fmt.Fprintln(out, "Passphrases do not match. Please retry.")
} else {
fmt.Fprintln(out, "Passphrase incorrect. Please retry.")
}
}
// First, check if we have a password cached for this alias.
if numAttempts == 0 {
if userEnteredTargetsSnapshotsPass && (alias == tufSnapshotAlias || alias == tufTargetsAlias) {
return targetsSnapshotsPass, false, nil
}
if userEnteredRootsPass && (alias == "root") {
return rootsPass, false, nil
}
}
if numAttempts > 3 && !createNew {
return "", true, errors.New("Too many attempts")
}
state, err := term.SaveState(0)
if err != nil {
return "", false, err
}
term.DisableEcho(0, state)
defer term.RestoreTerminal(0, state)
stdin := bufio.NewReader(in)
indexOfLastSeparator := strings.LastIndex(keyName, string(filepath.Separator))
if len(keyName) > indexOfLastSeparator+idBytesToDisplay+1 {
keyName = keyName[:indexOfLastSeparator+idBytesToDisplay+1]
}
if createNew {
fmt.Fprintf(out, "Enter passphrase for new %s key with id %s: ", alias, keyName)
} else {
fmt.Fprintf(out, "Enter key passphrase for %s key with id %s: ", alias, keyName)
}
passphrase, err := stdin.ReadBytes('\n')
fmt.Fprintln(out)
if err != nil {
return "", false, err
}
retPass := strings.TrimSpace(string(passphrase))
if !createNew {
if alias == tufSnapshotAlias || alias == tufTargetsAlias {
userEnteredTargetsSnapshotsPass = true
targetsSnapshotsPass = retPass
}
if alias == tufRootAlias {
userEnteredRootsPass = true
rootsPass = retPass
}
return retPass, false, nil
}
if len(retPass) < 8 {
fmt.Fprintln(out, "Please use a password manager to generate and store a good random passphrase.")
return "", false, errors.New("Passphrase too short")
}
fmt.Fprintf(out, "Repeat passphrase for new %s key with id %s: ", alias, keyName)
confirmation, err := stdin.ReadBytes('\n')
fmt.Fprintln(out)
if err != nil {
return "", false, err
}
confirmationStr := strings.TrimSpace(string(confirmation))
if retPass != confirmationStr {
return "", false, errors.New("The entered passphrases do not match")
}
if alias == tufSnapshotAlias || alias == tufTargetsAlias {
userEnteredTargetsSnapshotsPass = true
targetsSnapshotsPass = retPass
}
if alias == tufRootAlias {
userEnteredRootsPass = true
rootsPass = retPass
}
return retPass, false, nil
}
}
// CmdLogin logs in or registers a user to a Docker registry service.
//
// If no server is specified, the user will be logged into or registered to the registry's index server.
//
// Usage: docker login SERVER
func (cli *DockerCli) CmdLogin(args ...string) error {
cmd := Cli.Subcmd("login", []string{"[SERVER]"}, Cli.DockerCommands["login"].Description+".\nIf no server is specified \""+registry.IndexServer+"\" is the default.", true)
cmd.Require(flag.Max, 1)
var username, password, email string
cmd.StringVar(&username, []string{"u", "-username"}, "", "Username")
cmd.StringVar(&password, []string{"p", "-password"}, "", "Password")
cmd.StringVar(&email, []string{"e", "-email"}, "", "Email")
cmd.ParseFlags(args, true)
// On Windows, force the use of the regular OS stdin stream. Fixes #14336/#14210
if runtime.GOOS == "windows" {
cli.in = os.Stdin
}
serverAddress := registry.IndexServer
if len(cmd.Args()) > 0 {
serverAddress = cmd.Arg(0)
}
promptDefault := func(prompt string, configDefault string) {
if configDefault == "" {
fmt.Fprintf(cli.out, "%s: ", prompt)
} else {
fmt.Fprintf(cli.out, "%s (%s): ", prompt, configDefault)
}
}
readInput := func(in io.Reader, out io.Writer) string {
reader := bufio.NewReader(in)
line, _, err := reader.ReadLine()
if err != nil {
fmt.Fprintln(out, err.Error())
os.Exit(1)
}
return string(line)
}
authconfig, ok := cli.configFile.AuthConfigs[serverAddress]
if !ok {
authconfig = cliconfig.AuthConfig{}
}
if username == "" {
promptDefault("Username", authconfig.Username)
username = readInput(cli.in, cli.out)
username = strings.TrimSpace(username)
if username == "" {
username = authconfig.Username
}
}
// Assume that a different username means they may not want to use
// the password or email from the config file, so prompt them
if username != authconfig.Username {
if password == "" {
oldState, err := term.SaveState(cli.inFd)
if err != nil {
return err
}
fmt.Fprintf(cli.out, "Password: "******"\n")
term.RestoreTerminal(cli.inFd, oldState)
if password == "" {
return fmt.Errorf("Error : Password Required")
}
}
if email == "" {
promptDefault("Email", authconfig.Email)
email = readInput(cli.in, cli.out)
if email == "" {
email = authconfig.Email
}
}
} else {
// However, if they don't override the username use the
// password or email from the cmd line if specified. IOW, allow
// then to change/override them. And if not specified, just
// use what's in the config file
if password == "" {
password = authconfig.Password
}
if email == "" {
email = authconfig.Email
}
}
authconfig.Username = username
authconfig.Password = password
authconfig.Email = email
authconfig.ServerAddress = serverAddress
cli.configFile.AuthConfigs[serverAddress] = authconfig
auth := cli.configFile.AuthConfigs[serverAddress]
response, err := cli.client.RegistryLogin(auth)
if err != nil {
if lib.IsErrUnauthorized(err) {
delete(cli.configFile.AuthConfigs, serverAddress)
if err2 := cli.configFile.Save(); err2 != nil {
fmt.Fprintf(cli.out, "WARNING: could not save config file: %v\n", err2)
}
}
return err
}
if err := cli.configFile.Save(); err != nil {
return fmt.Errorf("Error saving config file: %v", err)
}
fmt.Fprintf(cli.out, "WARNING: login credentials saved in %s\n", cli.configFile.Filename())
if response.Status != "" {
fmt.Fprintf(cli.out, "%s\n", response.Status)
}
return nil
}