func TestAddPoint(t *testing.T) {
tests := []struct {
input Rect
point LatLng
want Rect
}{
{
Rect{r1.EmptyInterval(), s1.EmptyInterval()},
LatLngFromDegrees(0, 0),
rectFromDegrees(0, 0, 0, 0),
},
{
rectFromDegrees(0, 0, 0, 0),
LatLng{0 * s1.Radian, (-math.Pi / 2) * s1.Radian},
rectFromDegrees(0, -90, 0, 0),
},
{
rectFromDegrees(0, -90, 0, 0),
LatLng{(math.Pi / 4) * s1.Radian, (-math.Pi) * s1.Radian},
rectFromDegrees(0, -180, 45, 0),
},
{
rectFromDegrees(0, -180, 45, 0),
LatLng{(math.Pi / 2) * s1.Radian, 0 * s1.Radian},
rectFromDegrees(0, -180, 90, 0),
},
}
for _, test := range tests {
if got, want := test.input.AddPoint(test.point), test.want; !rectApproxEqual(got, want) {
t.Errorf("%v.AddPoint(%v) was %v, want %v", test.input, test.point, got, want)
}
}
}
func TestExpanded(t *testing.T) {
empty := Rect{FullRect().Lat, s1.EmptyInterval()}
tests := []struct {
input Rect
margin LatLng
want Rect
}{
{
rectFromDegrees(70, 150, 80, 170),
LatLngFromDegrees(20, 30),
rectFromDegrees(50, 120, 90, -160),
},
{
empty,
LatLngFromDegrees(20, 30),
empty,
},
{
FullRect(),
LatLngFromDegrees(20, 30),
FullRect(),
},
{
rectFromDegrees(-90, 170, 10, 20),
LatLngFromDegrees(30, 80),
rectFromDegrees(-90, -180, 40, 180),
},
}
for _, test := range tests {
if got, want := test.input.expanded(test.margin), test.want; !rectApproxEqual(got, want) {
t.Errorf("%v.Expanded(%v) was %v, want %v", test.input, test.margin, got, want)
}
}
}
// EmptyRect returns the empty rectangle.
func EmptyRect() Rect { return Rect{r1.EmptyInterval(), s1.EmptyInterval()} }
// RectBound returns the bounding rectangle of this cell.
func (c Cell) RectBound() Rect {
if c.level > 0 {
// Except for cells at level 0, the latitude and longitude extremes are
// attained at the vertices. Furthermore, the latitude range is
// determined by one pair of diagonally opposite vertices and the
// longitude range is determined by the other pair.
//
// We first determine which corner (i,j) of the cell has the largest
// absolute latitude. To maximize latitude, we want to find the point in
// the cell that has the largest absolute z-coordinate and the smallest
// absolute x- and y-coordinates. To do this we look at each coordinate
// (u and v), and determine whether we want to minimize or maximize that
// coordinate based on the axis direction and the cell's (u,v) quadrant.
u := c.uv.X.Lo + c.uv.X.Hi
v := c.uv.Y.Lo + c.uv.Y.Hi
var i, j int
if uAxis(int(c.face)).Z == 0 {
if u < 0 {
i = 1
}
} else if u > 0 {
i = 1
}
if vAxis(int(c.face)).Z == 0 {
if v < 0 {
j = 1
}
} else if v > 0 {
j = 1
}
lat := r1.IntervalFromPoint(c.latitude(i, j)).AddPoint(c.latitude(1-i, 1-j))
lng := s1.EmptyInterval().AddPoint(c.longitude(i, 1-j)).AddPoint(c.longitude(1-i, j))
// We grow the bounds slightly to make sure that the bounding rectangle
// contains LatLngFromPoint(P) for any point P inside the loop L defined by the
// four *normalized* vertices. Note that normalization of a vector can
// change its direction by up to 0.5 * dblEpsilon radians, and it is not
// enough just to add Normalize calls to the code above because the
// latitude/longitude ranges are not necessarily determined by diagonally
// opposite vertex pairs after normalization.
//
// We would like to bound the amount by which the latitude/longitude of a
// contained point P can exceed the bounds computed above. In the case of
// longitude, the normalization error can change the direction of rounding
// leading to a maximum difference in longitude of 2 * dblEpsilon. In
// the case of latitude, the normalization error can shift the latitude by
// up to 0.5 * dblEpsilon and the other sources of error can cause the
// two latitudes to differ by up to another 1.5 * dblEpsilon, which also
// leads to a maximum difference of 2 * dblEpsilon.
return Rect{lat, lng}.expanded(LatLng{s1.Angle(2 * dblEpsilon), s1.Angle(2 * dblEpsilon)}).PolarClosure()
}
// The 4 cells around the equator extend to +/-45 degrees latitude at the
// midpoints of their top and bottom edges. The two cells covering the
// poles extend down to +/-35.26 degrees at their vertices. The maximum
// error in this calculation is 0.5 * dblEpsilon.
var bound Rect
switch c.face {
case 0:
bound = Rect{r1.Interval{-math.Pi / 4, math.Pi / 4}, s1.Interval{-math.Pi / 4, math.Pi / 4}}
case 1:
bound = Rect{r1.Interval{-math.Pi / 4, math.Pi / 4}, s1.Interval{math.Pi / 4, 3 * math.Pi / 4}}
case 2:
bound = Rect{r1.Interval{poleMinLat, math.Pi / 2}, s1.FullInterval()}
case 3:
bound = Rect{r1.Interval{-math.Pi / 4, math.Pi / 4}, s1.Interval{3 * math.Pi / 4, -3 * math.Pi / 4}}
case 4:
bound = Rect{r1.Interval{-math.Pi / 4, math.Pi / 4}, s1.Interval{-3 * math.Pi / 4, -math.Pi / 4}}
default:
bound = Rect{r1.Interval{-math.Pi / 2, -poleMinLat}, s1.FullInterval()}
}
// Finally, we expand the bound to account for the error when a point P is
// converted to an LatLng to test for containment. (The bound should be
// large enough so that it contains the computed LatLng of any contained
// point, not just the infinite-precision version.) We don't need to expand
// longitude because longitude is calculated via a single call to math.Atan2,
// which is guaranteed to be semi-monotonic.
return bound.expanded(LatLng{s1.Angle(dblEpsilon), s1.Angle(0)})
}
// AddPoint adds the given point to the chain. The Point must be unit length.
func (r *RectBounder) AddPoint(b Point) {
bLL := LatLngFromPoint(b)
if r.bound.IsEmpty() {
r.a = b
r.aLL = bLL
r.bound = r.bound.AddPoint(bLL)
return
}
// First compute the cross product N = A x B robustly. This is the normal
// to the great circle through A and B. We don't use RobustSign
// since that method returns an arbitrary vector orthogonal to A if the two
// vectors are proportional, and we want the zero vector in that case.
n := r.a.Sub(b.Vector).Cross(r.a.Add(b.Vector)) // N = 2 * (A x B)
// The relative error in N gets large as its norm gets very small (i.e.,
// when the two points are nearly identical or antipodal). We handle this
// by choosing a maximum allowable error, and if the error is greater than
// this we fall back to a different technique. Since it turns out that
// the other sources of error in converting the normal to a maximum
// latitude add up to at most 1.16 * dblEpsilon, and it is desirable to
// have the total error be a multiple of dblEpsilon, we have chosen to
// limit the maximum error in the normal to be 3.84 * dblEpsilon.
// It is possible to show that the error is less than this when
//
// n.Norm() >= 8 * sqrt(3) / (3.84 - 0.5 - sqrt(3)) * dblEpsilon
// = 1.91346e-15 (about 8.618 * dblEpsilon)
nNorm := n.Norm()
if nNorm < 1.91346e-15 {
// A and B are either nearly identical or nearly antipodal (to within
// 4.309 * dblEpsilon, or about 6 nanometers on the earth's surface).
if r.a.Dot(b.Vector) < 0 {
// The two points are nearly antipodal. The easiest solution is to
// assume that the edge between A and B could go in any direction
// around the sphere.
r.bound = FullRect()
} else {
// The two points are nearly identical (to within 4.309 * dblEpsilon).
// In this case we can just use the bounding rectangle of the points,
// since after the expansion done by GetBound this Rect is
// guaranteed to include the (lat,lng) values of all points along AB.
r.bound = r.bound.Union(RectFromLatLng(r.aLL).AddPoint(bLL))
}
r.a = b
r.aLL = bLL
return
}
// Compute the longitude range spanned by AB.
lngAB := s1.EmptyInterval().AddPoint(r.aLL.Lng.Radians()).AddPoint(bLL.Lng.Radians())
if lngAB.Length() >= math.Pi-2*dblEpsilon {
// The points lie on nearly opposite lines of longitude to within the
// maximum error of the calculation. The easiest solution is to assume
// that AB could go on either side of the pole.
lngAB = s1.FullInterval()
}
// Next we compute the latitude range spanned by the edge AB. We start
// with the range spanning the two endpoints of the edge:
latAB := r1.IntervalFromPoint(r.aLL.Lat.Radians()).AddPoint(bLL.Lat.Radians())
// This is the desired range unless the edge AB crosses the plane
// through N and the Z-axis (which is where the great circle through A
// and B attains its minimum and maximum latitudes). To test whether AB
// crosses this plane, we compute a vector M perpendicular to this
// plane and then project A and B onto it.
m := n.Cross(PointFromCoords(0, 0, 1).Vector)
mA := m.Dot(r.a.Vector)
mB := m.Dot(b.Vector)
// We want to test the signs of "mA" and "mB", so we need to bound
// the error in these calculations. It is possible to show that the
// total error is bounded by
//
// (1 + sqrt(3)) * dblEpsilon * nNorm + 8 * sqrt(3) * (dblEpsilon**2)
// = 6.06638e-16 * nNorm + 6.83174e-31
mError := 6.06638e-16*nNorm + 6.83174e-31
if mA*mB < 0 || math.Abs(mA) <= mError || math.Abs(mB) <= mError {
// Minimum/maximum latitude *may* occur in the edge interior.
//
// The maximum latitude is 90 degrees minus the latitude of N. We
// compute this directly using atan2 in order to get maximum accuracy
// near the poles.
//
// Our goal is compute a bound that contains the computed latitudes of
// all S2Points P that pass the point-in-polygon containment test.
// There are three sources of error we need to consider:
// - the directional error in N (at most 3.84 * dblEpsilon)
// - converting N to a maximum latitude
// - computing the latitude of the test point P
// The latter two sources of error are at most 0.955 * dblEpsilon
// individually, but it is possible to show by a more complex analysis
// that together they can add up to at most 1.16 * dblEpsilon, for a
// total error of 5 * dblEpsilon.
//
// We add 3 * dblEpsilon to the bound here, and GetBound() will pad
// the bound by another 2 * dblEpsilon.
maxLat := math.Min(
math.Atan2(math.Sqrt(n.X*n.X+n.Y*n.Y), math.Abs(n.Z))+3*dblEpsilon,
math.Pi/2)
// In order to get tight bounds when the two points are close together,
// we also bound the min/max latitude relative to the latitudes of the
// endpoints A and B. First we compute the distance between A and B,
// and then we compute the maximum change in latitude between any two
// points along the great circle that are separated by this distance.
// This gives us a latitude change "budget". Some of this budget must
// be spent getting from A to B; the remainder bounds the round-trip
// distance (in latitude) from A or B to the min or max latitude
// attained along the edge AB.
latBudget := 2 * math.Asin(0.5*(r.a.Sub(b.Vector)).Norm()*math.Sin(maxLat))
maxDelta := 0.5*(latBudget-latAB.Length()) + dblEpsilon
// Test whether AB passes through the point of maximum latitude or
// minimum latitude. If the dot product(s) are small enough then the
// result may be ambiguous.
if mA <= mError && mB >= -mError {
latAB.Hi = math.Min(maxLat, latAB.Hi+maxDelta)
}
if mB <= mError && mA >= -mError {
latAB.Lo = math.Max(-maxLat, latAB.Lo-maxDelta)
}
}
r.a = b
r.aLL = bLL
r.bound = r.bound.Union(Rect{latAB, lngAB})
}