func main() {
if len(os.Args) != 4 {
fmt.Fprintf(os.Stderr, "%v <device> <baud> <data>\n", os.Args[0])
os.Exit(1)
}
baud, err := strconv.Atoi(os.Args[2])
if err != nil {
fmt.Fprintf(os.Stderr, "baud must be numerical\n")
os.Exit(1)
}
c := &goserial.Config{Name: os.Args[1], Baud: baud}
s, err := goserial.OpenPort(c)
if err != nil {
fmt.Fprintf(os.Stderr, "Error connecting to device: %v\n", err)
os.Exit(2)
}
err = sendBytes(s, []byte(os.Args[3]))
if err != nil {
fmt.Fprintf(os.Stderr, "Error writing data: %v\n", err)
os.Exit(3)
}
}
func openSerialPortOrExit() io.ReadWriteCloser {
c := &goserial.Config{Name: serialPort, Baud: serialBaud}
ser, err := goserial.OpenPort(c)
if err != nil {
log.Printf("Could not connect to serial port %s.", serialPort)
log.Fatal(err)
}
return ser
}
func main() {
flag.Parse()
sink, err := carbon.DialClient(net.TCPAddr{net.IPv4(127, 0, 0, 1), 2003})
if err != nil {
log.Fatal(err)
}
routerAddr := net.UDPAddr{net.IPv4(192, 168, 1, 1), 161}
routerScrapers := scraper.ScrapingPoller{
Ticks: time.Tick(10 * time.Second),
Scrapers: []scraper.PolledScraper{
&snmp.Counter32Scraper{
Sender: sink.NewUint32Sender("network.router.wan.inBytes"),
Addr: routerAddr,
OID: []int{1, 3, 6, 1, 2, 1, 2, 2, 1, 10, 2},
},
&snmp.Counter32Scraper{
Sender: sink.NewUint32Sender("network.router.wan.outBytes"),
Addr: routerAddr,
OID: []int{1, 3, 6, 1, 2, 1, 2, 2, 1, 16, 2},
},
},
}
allScrapers := []scraper.PassiveScraper{
&routerScrapers,
}
// TODO: Use a serial port instead. For now this just reads and parses data
// from the given file for testing.
if *currentCostFile != "" {
serialConfig := &goserial.Config{
Name: *currentCostFile,
Baud: 57600,
Parity: goserial.ParityNone,
Size: goserial.ByteSize8,
StopBits: goserial.StopBits1,
}
if serial, err := goserial.OpenPort(serialConfig); err != nil {
log.Print(err)
} else {
defer serial.Close()
allScrapers = append(allScrapers, cc.NewScraper(cc.Config{
Serial: serial,
}))
}
}
for _, s := range allScrapers {
fmt.Printf("scraper: %s\n", s)
}
scraper.RunPassiveScrapers(allScrapers)
select {}
}
// Open a device and set various control parameters, such as baud rate.
func open(tty string) io.ReadWriteCloser {
c := &serial.Config{Name: tty, Baud: 115200}
// out, err = os.OpenFile(tty, os.O_RDWR, 0x666) // ,
out, err := serial.OpenPort(c)
if err != nil {
log.Fatalf("Unable to open %s: %v", tty, err)
}
return out
}
func sendLCDStr(serialConfigure *goserial.Config, str *lcdString, fin chan bool) {
for {
str = lcdStringBuffer
shiftCoord := len(str.c) * 16
for i := 0; i < shiftCoord+96+1; i++ {
serialPort, _ := goserial.OpenPort(serialConfigure)
packet := createPacket(*str, i-96)
writeLCDMatrix(packet, serialPort)
//time.Sleep(1 * time.Millisecond)
serialPort.Close()
}
}
fin <- true
}
// Axon listens to the dentrites on the deltaE channel, and embodies an artificial neurone. When the energy
// of the neurone reaches a maximum, it fires into the axon (the web dendites of adjacent neurones).
func axon(deltaE chan float32, config Configuration) {
// Find the device that represents the arduino serial connection.
c := &goserial.Config{Name: findArduino(), Baud: 9600}
s, _ := goserial.OpenPort(c)
// When connecting to an older revision arduino, you need to wait a little while it resets.
time.Sleep(1 * time.Second)
neurone := Neurone{-2.0, deltaE, waitLength, time.Now().UnixNano(), config}
state := wait
for {
state, neurone = state(neurone, s)
fmt.Printf("INFO: e[%f]\n", neurone.energy)
}
}
// NewSerialMessageReader opens the named serial port, configures it for
// reading Current Cost data, and returns a MessageReader for doing so.
func NewSerialMessageReader(serialPath string) (*MessageReader, error) {
serialConfig := &goserial.Config{
Name: serialPath,
Baud: 57600,
Parity: goserial.ParityNone,
Size: goserial.Byte8,
StopBits: goserial.StopBits1,
}
var serial io.ReadCloser
var err error
if serial, err = goserial.OpenPort(serialConfig); err != nil {
return nil, err
}
return NewMessageReader(serial), nil
}
func NewMcs() *Mcs {
m := new(Mcs)
m.Tree = typefaster.NewDiskTree(*treename)
m.Cnode = m.Tree.Root()
c := new(goserial.Config)
c.Name = "/dev/ttyAMA0"
c.Baud = 9600
s, err := goserial.OpenPort(c)
if err != nil {
log.Fatal(err)
}
n, err := s.Write([]byte{97})
if err != nil {
log.Fatal(err)
} else {
fmt.Println("serial write got back", n)
}
m.serial = s
return m
}
func NewUART(nr UARTNr, baud int, size UARTByteSize, parity UARTParityMode, stopBits UARTStopBits) (*UART, error) {
dt := fmt.Sprintf("ADAFRUIT-UART%d", nr)
err := LoadDeviceTree(dt)
if err != nil {
return nil, err
}
uart := &UART{nr: nr}
config := &goserial.Config{
Name: fmt.Sprintf("/dev/ttyO%d", nr),
Baud: baud,
Size: goserial.ByteSize(size),
Parity: goserial.ParityMode(parity),
StopBits: goserial.StopBits(stopBits),
}
uart.serial, err = goserial.OpenPort(config)
if err != nil {
return nil, err
}
return uart, nil
}
func (mod *SerialBee) Run(eventChan chan bees.Event) {
if mod.baudrate == 0 || mod.device == "" {
return
}
var err error
c := &goserial.Config{Name: mod.device, Baud: mod.baudrate}
mod.conn, err = goserial.OpenPort(c)
if err != nil {
log.Fatal(err)
}
time.Sleep(1 * time.Second)
for {
//FIXME: don't block
select {
case <-mod.SigChan:
return
default:
}
text := ""
c := []byte{0}
for {
_, err := mod.conn.Read(c)
if err != nil {
time.Sleep(1 * time.Second)
continue
}
if c[0] == 10 || c[0] == 13 {
break
}
text += string(c[0])
}
if len(text) > 0 {
text = strings.TrimSpace(text)
ev := bees.Event{
Bee: mod.Name(),
Name: "message",
Options: []bees.Placeholder{
bees.Placeholder{
Name: "port",
Type: "string",
Value: mod.device,
},
bees.Placeholder{
Name: "text",
Type: "string",
Value: text,
},
},
}
eventChan <- ev
}
time.Sleep(1 * time.Second)
}
}
