Example #1
0
// Read 978MHz from SDR.
func sdrReader() {
	var err error
	var dev *rtl.Context

	log.Printf("===== UAT Device name: %s =====\n", rtl.GetDeviceName(uatSDR))
	if dev, err = rtl.Open(uatSDR); err != nil {
		log.Printf("\tOpen Failed, exiting\n")
		uatSDR = -1
		return
	}
	defer dev.Close()
	m, p, s, err := dev.GetUsbStrings()
	if err != nil {
		log.Printf("\tGetUsbStrings Failed - error: %s\n", err)
	} else {
		log.Printf("\tGetUsbStrings - %s %s %s\n", m, p, s)
	}
	log.Printf("\tGetTunerType: %s\n", dev.GetTunerType())

	//---------- Set Tuner Gain ----------
	tgain := 480

	err = dev.SetTunerGainMode(true)
	if err != nil {
		log.Printf("\tSetTunerGainMode Failed - error: %s\n", err)
	} else {
		log.Printf("\tSetTunerGainMode Successful\n")
	}

	err = dev.SetTunerGain(tgain)
	if err != nil {
		log.Printf("\tSetTunerGain Failed - error: %s\n", err)
	} else {
		log.Printf("\tSetTunerGain Successful\n")
	}

	//---------- Get/Set Sample Rate ----------
	samplerate := 2083334
	err = dev.SetSampleRate(samplerate)
	if err != nil {
		log.Printf("\tSetSampleRate Failed - error: %s\n", err)
	} else {
		log.Printf("\tSetSampleRate - rate: %d\n", samplerate)
	}
	log.Printf("\tGetSampleRate: %d\n", dev.GetSampleRate())

	//---------- Get/Set Xtal Freq ----------
	rtlFreq, tunerFreq, err := dev.GetXtalFreq()
	if err != nil {
		log.Printf("\tGetXtalFreq Failed - error: %s\n", err)
	} else {
		log.Printf("\tGetXtalFreq - Rtl: %d, Tuner: %d\n", rtlFreq, tunerFreq)
	}

	newRTLFreq := 28800000
	newTunerFreq := 28800000
	err = dev.SetXtalFreq(newRTLFreq, newTunerFreq)
	if err != nil {
		log.Printf("\tSetXtalFreq Failed - error: %s\n", err)
	} else {
		log.Printf("\tSetXtalFreq - Center freq: %d, Tuner freq: %d\n",
			newRTLFreq, newTunerFreq)
	}

	//---------- Get/Set Center Freq ----------
	err = dev.SetCenterFreq(978000000)
	if err != nil {
		log.Printf("\tSetCenterFreq 978MHz Failed, error: %s\n", err)
	} else {
		log.Printf("\tSetCenterFreq 978MHz Successful\n")
	}

	log.Printf("\tGetCenterFreq: %d\n", dev.GetCenterFreq())

	//---------- Set Bandwidth ----------
	bw := 1000000
	log.Printf("\tSetting Bandwidth: %d\n", bw)
	if err = dev.SetTunerBw(bw); err != nil {
		log.Printf("\tSetTunerBw %d Failed, error: %s\n", bw, err)
	} else {
		log.Printf("\tSetTunerBw %d Successful\n", bw)
	}

	if err = dev.ResetBuffer(); err == nil {
		log.Printf("\tResetBuffer Successful\n")
	} else {
		log.Printf("\tResetBuffer Failed - error: %s\n", err)
	}
	//---------- Get/Set Freq Correction ----------
	freqCorr := dev.GetFreqCorrection()
	log.Printf("\tGetFreqCorrection: %d\n", freqCorr)
	err = dev.SetFreqCorrection(globalSettings.PPM)
	if err != nil {
		log.Printf("\tSetFreqCorrection %d Failed, error: %s\n", globalSettings.PPM, err)
	} else {
		log.Printf("\tSetFreqCorrection %d Successful\n", globalSettings.PPM)
	}

	for uatSDR != -1 {
		var buffer = make([]uint8, rtl.DefaultBufLength)
		nRead, err := dev.ReadSync(buffer, rtl.DefaultBufLength)
		if err != nil {
			log.Printf("\tReadSync Failed - error: %s\n", err)
			uatSDR = -1
			break
		} else {
			//			log.Printf("\tReadSync %d\n", nRead)
			buf := buffer[:nRead]
			godump978.InChan <- buf
		}
	}
}
Example #2
0
func main() {
	runtime.GOMAXPROCS(3)
	var status int
	var dev *rtl.Context

	if c := rtl.GetDeviceCount(); c == 0 {
		log.Fatal("No devices found, exiting.\n")
	} else {
		for i := 0; i < c; i++ {
			m, p, s, status := rtl.GetDeviceUsbStrings(i)
			log.Printf("GetDeviceUsbStrings %s - %s %s %s\n",
				rtl.Status[status], m, p, s)
		}
	}

	log.Printf("===== Device name: %s =====\n", rtl.GetDeviceName(0))
	log.Printf("===== Running tests using device indx: %d =====\n", 0)

	if dev, status = rtl.Open(0); status != rtl.Success {
		log.Fatal("\tOpen Failed, exiting\n")
	}
	defer dev.Close()
	go sig_abort(dev)

	m, p, s, status := dev.GetUsbStrings()
	log.Printf("\tGetUsbStrings %s - %s %s %s\n", rtl.Status[status], m, p, s)

	g, status := dev.GetTunerGains()
	log.Printf("\tGetTunerGains %s\n", rtl.Status[status])
	if status == rtl.Success {
		fmt.Printf("\tGains: ")
		for _, j := range g {
			fmt.Printf("%d ", j)
		}
		fmt.Printf("\n")
	}

	log.Printf("\tSetSampleRate %s - rate: %d\n",
		rtl.Status[dev.SetSampleRate(rtl.DefaultSampleRate)], rtl.DefaultSampleRate)
	log.Printf("\tGetSampleRate: %d\n", dev.GetSampleRate())

	// status = dev.SetXtalFreq(rtl_freq, tuner_freq)
	// log.Printf("\tSetXtalFreq %s - Center freq: %d, Tuner freq: %d\n",
	// 	rtl.Status[status], rtl_freq, tuner_freq)

	rtl_freq, tuner_freq, status := dev.GetXtalFreq()
	log.Printf("\tGetXtalFreq %s - Rtl: %d, Tuner: %d\n",
		rtl.Status[status], rtl_freq, tuner_freq)

	status = dev.SetCenterFreq(850000000)
	if status < 0 {
		log.Println("\tSetCenterFreq 850MHz Failed, error code: %d\n", status)
	} else {
		log.Println("\tSetCenterFreq 850MHz Successful")
	}

	log.Printf("\tGetCenterFreq: %d\n", dev.GetCenterFreq())
	log.Printf("\tGetFreqCorrection: %d\n", dev.GetFreqCorrection())
	log.Printf("\tGetTunerType: %s\n", rtl.TunerType[dev.GetTunerType()])
	log.Printf("\tSetTunerGainMode: %s\n", rtl.TunerType[dev.SetTunerGainMode(rtl.GainAuto)])
	log.Printf("\tGetTunerGain: %d\n", dev.GetTunerGain())

	/*
		func (c *Context) SetFreqCorrection(ppm int) (err int)
		func (c *Context) SetTunerGain(gain int) (err int)
		func (c *Context) SetTunerIfGain(stage, gain int) (err int)
		func (c *Context) SetAgcMode(on int) (err int)
		func (c *Context) SetDirectSampling(on int) (err int)
	*/

	if status = dev.SetTestMode(1); status < 1 {
		log.Printf("\tSetTestMode 'On' Failed - error code: %d\n", status)
	} else {
		log.Printf("\tSetTestMode 'On' Successful\n")
	}

	log.Printf("\tResetBuffer %s\n", rtl.Status[dev.ResetBuffer()])

	var buffer []byte = make([]uint8, rtl.DefaultBufLength)
	n_read, status := dev.ReadSync(buffer, rtl.DefaultBufLength)
	log.Printf("\tReadSync %s\n", rtl.Status[status])
	if status == rtl.Success && n_read < rtl.DefaultBufLength {
		log.Println("ReadSync short read, %d samples lost\n", rtl.DefaultBufLength-n_read)
	}

	if status = dev.SetTestMode(1); status < 1 {
		log.Printf("\tSetTestMode 'Off' Fail - error code: %d\n", status)
	} else {
		log.Printf("\tSetTestMode 'Off' Success\n")
	}

	// Note, ReadAsync blocks until CancelAsync is called, so spawn
	// a goroutine running in its own system thread that'll wait
	// for the async-read callback to signal when it's done.
	IQch := make(chan bool)
	go async_stop(dev, IQch)
	var userctx rtl.UserCtx = IQch
	status = dev.ReadAsync(rtlsdr_cb, &userctx, rtl.DefaultAsyncBufNumber, rtl.DefaultBufLength)
	log.Printf("\tReadAsync %s\n", rtl.Status[status])

	log.Printf("Exiting...\n")
}
Example #3
0
func main() {
	var err error
	var dev *rtl.Context

	//---------- Device Check ----------
	if c := rtl.GetDeviceCount(); c == 0 {
		log.Fatal("No devices found, exiting.\n")
	} else {
		for i := 0; i < c; i++ {
			m, p, s, err := rtl.GetDeviceUsbStrings(i)
			if err == nil {
				err = errors.New("")
			}
			log.Printf("GetDeviceUsbStrings %s - %s %s %s\n",
				err, m, p, s)
		}
	}

	log.Printf("===== Device name: %s =====\n", rtl.GetDeviceName(0))
	log.Printf("===== Running tests using device indx: 0 =====\n")

	//---------- Open Device ----------
	if dev, err = rtl.Open(0); err != nil {
		log.Fatal("\tOpen Failed, exiting\n")
	}
	defer dev.Close()
	go sigAbort(dev)

	//---------- Device Strings ----------
	m, p, s, err := dev.GetUsbStrings()
	if err != nil {
		log.Printf("\tGetUsbStrings Failed - error: %s\n", err)
	} else {
		log.Printf("\tGetUsbStrings - %s %s %s\n", m, p, s)
	}

	log.Printf("\tGetTunerType: %s\n", dev.GetTunerType())

	//---------- Set Tuner Gain ----------
	tgain := 480

	err = dev.SetTunerGainMode(true)
	if err != nil {
		log.Printf("\tSetTunerGainMode Failed - error: %s\n", err)
	} else {
		log.Printf("\tSetTunerGainMode Successful\n")
	}

	err = dev.SetTunerGain(tgain)
	if err != nil {
		log.Printf("\tSetTunerGain Failed - error: %s\n", err)
	} else {
		log.Printf("\tSetTunerGain Successful\n")
	}

	//---------- Get/Set Sample Rate ----------
	samplerate := 2083334
	err = dev.SetSampleRate(samplerate)
	if err != nil {
		log.Printf("\tSetSampleRate Failed - error: %s\n", err)
	} else {
		log.Printf("\tSetSampleRate - rate: %d\n", samplerate)
	}
	log.Printf("\tGetSampleRate: %d\n", dev.GetSampleRate())

	//---------- Get/Set Xtal Freq ----------
	rtlFreq, tunerFreq, err := dev.GetXtalFreq()
	if err != nil {
		log.Printf("\tGetXtalFreq Failed - error: %s\n", err)
	} else {
		log.Printf("\tGetXtalFreq - Rtl: %d, Tuner: %d\n", rtlFreq, tunerFreq)
	}

	newRTLFreq := 28800000
	newTunerFreq := 28800000
	err = dev.SetXtalFreq(newRTLFreq, newTunerFreq)
	if err != nil {
		log.Printf("\tSetXtalFreq Failed - error: %s\n", err)
	} else {
		log.Printf("\tSetXtalFreq - Center freq: %d, Tuner freq: %d\n",
			newRTLFreq, newTunerFreq)
	}

	//---------- Get/Set Center Freq ----------
	err = dev.SetCenterFreq(978000000)
	if err != nil {
		log.Printf("\tSetCenterFreq 978MHz Failed, error: %s\n", err)
	} else {
		log.Printf("\tSetCenterFreq 978MHz Successful\n")
	}

	log.Printf("\tGetCenterFreq: %d\n", dev.GetCenterFreq())

	//---------- Set Bandwidth ----------
	bw := 1000000
	log.Printf("\tSetting Bandwidth: %d\n", bw)
	if err = dev.SetTunerBw(bw); err != nil {
		log.Printf("\tSetTunerBw %d Failed, error: %s\n", bw, err)
	} else {
		log.Printf("\tSetTunerBw %d Successful\n", bw)
	}

	/*
		//---------- Get/Set Freq Correction ----------
		freqCorr := dev.GetFreqCorrection()
		log.Printf("\tGetFreqCorrection: %d\n", freqCorr)
		err = dev.SetFreqCorrection(0) // 10ppm
		if err != nil {
			log.Printf("\tSetFreqCorrection %d Failed, error: %s\n", 0, err)
		} else {
			log.Printf("\tSetFreqCorrection %d Successful\n", 0)
		}


		//---------- Get/Set AGC Mode ----------
		if err = dev.SetAgcMode(false); err == nil {
			log.Printf("\tSetAgcMode off Successful\n")
		} else {
			log.Printf("\tSetAgcMode Failed, error: %s\n", err)
		}

		//---------- Get/Set Direct Sampling ----------
		if mode, err := dev.GetDirectSampling(); err == nil {
			log.Printf("\tGetDirectSampling Successful, mode: %s\n",
				rtl.SamplingModes[mode])
		} else {
			log.Printf("\tSetTestMode 'On' Failed - error: %s\n", err)
		}

		if err = dev.SetDirectSampling(rtl.SamplingNone); err == nil {
			log.Printf("\tSetDirectSampling 'On' Successful\n")
		} else {
			log.Printf("\tSetDirectSampling 'On' Failed - error: %s\n", err)
		}
	*/

	//---------- Get/Set Tuner IF Gain ----------
	// if err = SetTunerIfGain(stage, gain: int); err == nil {
	// 	log.Printf("\SetTunerIfGain Successful\n")
	// } else {
	// 	log.Printf("\tSetTunerIfGain Failed - error: %s\n", err)
	// }

	/*
		//---------- Get/Set test mode ----------
		if err = dev.SetTestMode(true); err == nil {
			log.Printf("\tSetTestMode 'On' Successful\n")
		} else {
			log.Printf("\tSetTestMode 'On' Failed - error: %s\n", err)
		}

		if err = dev.SetTestMode(false); err == nil {
			log.Printf("\tSetTestMode 'Off' Successful\n")
		} else {
			log.Printf("\tSetTestMode 'Off' Fail - error: %s\n", err)
		}

	*/

	//---------- Get/Set misc. streaming ----------
	godump978.Dump978Init()
	go printUAT()
	go godump978.ProcessDataFromChannel()

	if err = dev.ResetBuffer(); err == nil {
		log.Printf("\tResetBuffer Successful\n")
	} else {
		log.Printf("\tResetBuffer Failed - error: %s\n", err)
	}

	for {
		var buffer = make([]uint8, rtl.DefaultBufLength)
		nRead, err := dev.ReadSync(buffer, rtl.DefaultBufLength)
		if err != nil {
			log.Printf("\tReadSync Failed - error: %s\n", err)
		} else {
			log.Printf("\tReadSync %d\n", nRead)
			//			buf := buffer[:nRead]
			//			godump978.InChan <- buf
		}
	}
}