func exp2f4(x x86.M128) x86.M128 {
var ipart x86.M128i
var fpart, expipart, expfpart x86.M128
x = sse.MinPs(x, sse.Set1Ps(129))
x = sse.MaxPs(x, sse.Set1Ps(-126.99999))
/* ipart = int(x - 0.5) */
ipart = sse2.CvtpsEpi32(sse.SubPs(x, sse.Set1Ps(0.5)))
/* fpart = x - ipart */
fpart = sse.SubPs(x, sse2.Cvtepi32Ps(ipart))
/* expipart = (float) (1 << ipart) */
expipart = sse2.Castsi128Ps(sse2.SlliEpi32(sse2.AddEpi32(ipart, sse2.Set1Epi32(127)), 23))
/* minimax polynomial fit of 2**x, in range [-0.5, 0.5[ */
if EXP_poly_DEGREE == 5 {
expfpart = poly5(fpart, exp_p5_0, exp_p5_1, exp_p5_2, exp_p5_3, exp_p5_4, exp_p5_5)
} else if EXP_poly_DEGREE == 4 {
expfpart = poly4(fpart, exp_p4_0, exp_p4_1, exp_p4_2, exp_p4_3, exp_p4_4)
} else if EXP_poly_DEGREE == 3 {
expfpart = poly3(fpart, exp_p3_0, exp_p3_1, exp_p3_2, exp_p3_3)
} else if EXP_poly_DEGREE == 2 {
expfpart = poly2(fpart, exp_p2_0, exp_p2_1, exp_p2_2)
} else {
panic("invalid poly degree")
}
return sse.MulPs(expipart, expfpart)
}
// Mixed sse+sse2
// Applies a 3x3 matrix and sRGB gamma corrects input
// and writes it to output.
// https://github.com/rawstudio/rawstudio/blob/master/plugins/colorspace-transform/colorspace_transform_sse2.c#L205
func Transform8sRGB() {
w := 1048
h := 1024
var matrix [3][3]float32
// Input is a w * h * 4 components 16 bit per component image
var input = make([]byte, w*h*8)
// Output is 4 byte/pixel, RGBA image
var output = make([]byte, w*h*4)
// The matrix with values splatted to all registers
var matPs = make([]x86.M128, 3*3)
// Fill with values
matPs[0] = sse.Set1Ps(matrix[0][0])
matPs[1] = sse.Set1Ps(matrix[0][1])
matPs[2] = sse.Set1Ps(matrix[0][2])
matPs[3] = sse.Set1Ps(matrix[1][0])
matPs[4] = sse.Set1Ps(matrix[1][1])
matPs[5] = sse.Set1Ps(matrix[1][2])
matPs[6] = sse.Set1Ps(matrix[2][0])
matPs[7] = sse.Set1Ps(matrix[2][1])
matPs[8] = sse.Set1Ps(matrix[2][2])
for y := 0; y < h; y++ {
i := x86.BytesToM128i(input[y*w*8 : y*w*8+w*8])
o := x86.BytesToM128i(output[y*w*4 : y*w*4+w*4])
// Converts 4 pixels per loop
for x := 0; x < w/4; x++ {
/* Load and convert to float */
zero := sse2.SetzeroSi128()
in := i[x*2] // Load two pixels
in2 := i[x*2+1] // Load two pixels
p1 := sse2.UnpackloEpi16(in, zero)
p2 := sse2.UnpackhiEpi16(in, zero)
p3 := sse2.UnpackloEpi16(in2, zero)
p4 := sse2.UnpackhiEpi16(in2, zero)
p1f := sse2.Cvtepi32Ps(p1)
p2f := sse2.Cvtepi32Ps(p2)
p3f := sse2.Cvtepi32Ps(p3)
p4f := sse2.Cvtepi32Ps(p4)
/* Convert to planar */
g1g0r1r0 := sse.UnpackloPs(p1f, p2f)
b1b0 := sse.UnpackhiPs(p1f, p2f)
g3g2r3r2 := sse.UnpackloPs(p3f, p4f)
b3b2 := sse.UnpackhiPs(p3f, p4f)
r := sse.MovelhPs(g1g0r1r0, g3g2r3r2)
g := sse.MovehlPs(g3g2r3r2, g1g0r1r0)
b := sse.MovelhPs(b1b0, b3b2)
/* Apply matrix to convert to sRGB */
r = sseMatrix3Mul(matPs[0:3], r, g, b)
g = sseMatrix3Mul(matPs[3:6], r, g, b)
b = sseMatrix3Mul(matPs[6:9], r, g, b)
/* Normalize to 0->1 and clamp */
normalize := sse.Set1Ps(1.0 / 65535.0)
max_val := sse.Set1Ps(1.0)
min_val := sse.SetzeroPs()
r = sse.MinPs(max_val, sse.MaxPs(min_val, sse.MulPs(normalize, r)))
g = sse.MinPs(max_val, sse.MaxPs(min_val, sse.MulPs(normalize, g)))
b = sse.MinPs(max_val, sse.MaxPs(min_val, sse.MulPs(normalize, b)))
/* Apply Gamma */
/* Calculate values to be used if larger than junction point */
mul_over := sse.Set1Ps(1.055)
sub_over := sse.Set1Ps(0.055)
pow_over := sse.Set1Ps(1.0 / 2.4)
r_gam := sse.SubPs(sse.MulPs(mul_over, FastPowPs(r, pow_over)), sub_over)
g_gam := sse.SubPs(sse.MulPs(mul_over, FastPowPs(g, pow_over)), sub_over)
b_gam := sse.SubPs(sse.MulPs(mul_over, FastPowPs(b, pow_over)), sub_over)
/* Create mask for values smaller than junction point */
junction := sse.Set1Ps(0.0031308)
mask_r := sse.CmpltPs(r, junction)
mask_g := sse.CmpltPs(g, junction)
mask_b := sse.CmpltPs(b, junction)
/* Calculate value to be used if under junction */
mul_under := sse.Set1Ps(12.92)
r_mul := sse.AndPs(mask_r, sse.MulPs(mul_under, r))
g_mul := sse.AndPs(mask_g, sse.MulPs(mul_under, g))
b_mul := sse.AndPs(mask_b, sse.MulPs(mul_under, b))
/* Select the value to be used based on the junction mask and scale to 8 bit */
upscale := sse.Set1Ps(255.5)
r = sse.MulPs(upscale, sse.OrPs(r_mul, sse.AndnotPs(mask_r, r_gam)))
g = sse.MulPs(upscale, sse.OrPs(g_mul, sse.AndnotPs(mask_g, g_gam)))
b = sse.MulPs(upscale, sse.OrPs(b_mul, sse.AndnotPs(mask_b, b_gam)))
/* Convert to 8 bit unsigned and interleave*/
r_i := sse2.CvtpsEpi32(r)
g_i := sse2.CvtpsEpi32(g)
b_i := sse2.CvtpsEpi32(b)
r_i = sse2.PacksEpi32(r_i, r_i)
g_i = sse2.PacksEpi32(g_i, g_i)
b_i = sse2.PacksEpi32(b_i, b_i)
/* Set alpha value to 255 and store */
alpha_mask := sse2.Set1Epi32(0xff000000)
rg_i := sse2.UnpackloEpi16(r_i, g_i)
bb_i := sse2.UnpackloEpi16(b_i, b_i)
p1 = sse2.UnpackloEpi32(rg_i, bb_i)
p2 = sse2.UnpackhiEpi32(rg_i, bb_i)
p1 = sse2.OrSi128(alpha_mask, sse2.PackusEpi16(p1, p2))
o[x] = p1
}
}
}
// Float point example.
// If intrinsics where working, this would convert 4 RGB values to HSV.
// Converted from: https://github.com/rawstudio/rawstudio/blob/master/plugins/dcp/dcp-sse4.c#L74
func RGBtoHSV(r, g, b x86.M128) (h, s, v x86.M128) {
zeroPs := sse.SetzeroPs()
smallPs := sse.Set1Ps(verySmall)
onesPs := sse.Set1Ps(1.0)
// Any number > 1
add_v := sse.Set1Ps(2.0)
// Clamp
r = sse.MinPs(sse.MaxPs(r, smallPs), onesPs)
g = sse.MinPs(sse.MaxPs(g, smallPs), onesPs)
b = sse.MinPs(sse.MaxPs(b, smallPs), onesPs)
v = sse.MaxPs(b, sse.MaxPs(r, g))
h = zeroPs
m := sse.MinPs(b, sse.MinPs(r, g))
gap := sse.SubPs(v, m)
v_mask := sse.CmpeqPs(gap, zeroPs)
v = sse.AddPs(v, sse.AndPs(add_v, v_mask))
// Set gap to one where sat = 0, this will avoid divisions by zero, these values will not be used
onesPs = sse.AndPs(onesPs, v_mask)
gap = sse.OrPs(gap, onesPs)
// gap_inv = 1.0 / gap
gap_inv := sse.RcpPs(gap)
// if r == v
// h = (g - b) / gap;
mask := sse.CmpeqPs(r, v)
val := sse.MulPs(gap_inv, sse.SubPs(g, b))
// fill h
v = sse.AddPs(v, sse.AndPs(add_v, mask))
h = sse4.BlendvPs(h, val, mask)
// if g == v
// h = 2.0f + (b - r) / gap;
twoPs := sse.Set1Ps(2.0)
mask = sse.CmpeqPs(g, v)
val = sse.SubPs(b, r)
val = sse.MulPs(val, gap_inv)
val = sse.AddPs(val, twoPs)
v = sse.AddPs(v, sse.AndPs(add_v, mask))
h = sse4.BlendvPs(h, val, mask)
// If (b == v)
// h = 4.0f + (r - g) / gap;
fourPs := sse.AddPs(twoPs, twoPs)
mask = sse.CmpeqPs(b, v)
val = sse.AddPs(fourPs, sse.MulPs(gap_inv, sse.SubPs(r, g)))
v = sse.AddPs(v, sse.AndPs(add_v, mask))
h = sse4.BlendvPs(h, val, mask)
// Fill s, if gap > 0
v = sse.SubPs(v, add_v)
val = sse.MulPs(gap, sse.RcpPs(v))
s = sse.AndnotPs(v_mask, val)
// Check if h < 0
zeroPs = sse.SetzeroPs()
sixPs := sse.Set1Ps(6.0 - verySmall)
mask = sse.CmpltPs(h, zeroPs)
h = sse.AddPs(h, sse.AndPs(mask, sixPs))
return
}