Example #1
0
// Refresh obtains a fresh token for the Service Principal.
func (spt *ServicePrincipalToken) Refresh() error {
	p := map[string]interface{}{
		"tenantID":    spt.tenantID,
		"requestType": "token",
	}

	v := url.Values{}
	v.Set("client_id", spt.clientID)
	v.Set("grant_type", "client_credentials")
	v.Set("resource", spt.resource)

	err := spt.secret.SetAuthenticationValues(spt, &v)
	if err != nil {
		return err
	}

	req, err := autorest.Prepare(&http.Request{},
		autorest.AsPost(),
		autorest.AsFormURLEncoded(),
		autorest.WithBaseURL(oauthURL),
		autorest.WithPathParameters(p),
		autorest.WithFormData(v))
	if err != nil {
		return err
	}

	resp, err := autorest.SendWithSender(spt.sender, req)
	if err != nil {
		return autorest.NewErrorWithError(err,
			"azure.ServicePrincipalToken", "Refresh", resp.StatusCode, "Failure sending request for Service Principal %s",
			spt.clientID)
	}

	var newToken Token

	err = autorest.Respond(resp,
		autorest.WithErrorUnlessOK(),
		autorest.ByUnmarshallingJSON(&newToken),
		autorest.ByClosing())
	if err != nil {
		return autorest.NewErrorWithError(err,
			"azure.ServicePrincipalToken", "Refresh", resp.StatusCode, "Failure handling response to Service Principal %s request",
			spt.clientID)
	}

	spt.Token = newToken

	return nil
}
Example #2
0
// Update updates the account type or tags for a storage account. It can also
// be used to add a custom domain (note that custom domains cannot be added
// via the Create operation). Only one custom domain is supported per storage
// account. In order to replace a custom domain, the old value must be
// cleared before a new value may be set. To clear a custom domain, simply
// update the custom domain with empty string. Then call update again with
// the new cutsom domain name. The update API can only be used to update one
// of tags, accountType, or customDomain per call. To update multiple of
// these properties, call the API multiple times with one change per call.
// This call does not change the storage keys for the account. If you want to
// change storage account keys, use the RegenerateKey operation. The location
// and name of the storage account cannot be changed after creation.
//
// resourceGroupName is the name of the resource group within the user's
// subscription. accountName is the name of the storage account within the
// specified resource group. Storage account names must be between 3 and 24
// characters in length and use numbers and lower-case letters only.
// parameters is the parameters to update on the account. Note that only one
// property can be changed at a time using this API.
func (client AccountsClient) Update(resourceGroupName string, accountName string, parameters AccountUpdateParameters) (result Account, ae error) {
	req, err := client.UpdatePreparer(resourceGroupName, accountName, parameters)
	if err != nil {
		return result, autorest.NewErrorWithError(err, "storage/AccountsClient", "Update", autorest.UndefinedStatusCode, "Failure preparing request")
	}

	resp, err := client.UpdateSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "storage/AccountsClient", "Update", resp.StatusCode, "Failure sending request")
	}

	result, err = client.UpdateResponder(resp)
	if err != nil {
		ae = autorest.NewErrorWithError(err, "storage/AccountsClient", "Update", resp.StatusCode, "Failure responding to request")
	}

	return
}
Example #3
0
// RegenerateKey regenerates the access keys for the specified storage account.
//
// resourceGroupName is the name of the resource group within the user's
// subscription. accountName is the name of the storage account within the
// specified resource group. Storage account names must be between 3 and 24
// characters in length and use numbers and lower-case letters only.
// regenerateKey is specifies name of the key which should be regenerated.
// key1 or key2 for the default keys
func (client AccountsClient) RegenerateKey(resourceGroupName string, accountName string, regenerateKey AccountRegenerateKeyParameters) (result AccountKeys, ae error) {
	req, err := client.RegenerateKeyPreparer(resourceGroupName, accountName, regenerateKey)
	if err != nil {
		return result, autorest.NewErrorWithError(err, "storage/AccountsClient", "RegenerateKey", autorest.UndefinedStatusCode, "Failure preparing request")
	}

	resp, err := client.RegenerateKeySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "storage/AccountsClient", "RegenerateKey", resp.StatusCode, "Failure sending request")
	}

	result, err = client.RegenerateKeyResponder(resp)
	if err != nil {
		ae = autorest.NewErrorWithError(err, "storage/AccountsClient", "RegenerateKey", resp.StatusCode, "Failure responding to request")
	}

	return
}
Example #4
0
// CheckNameAvailability checks that account name is valid and is not in use.
//
// accountName is the name of the storage account within the specified
// resource group. Storage account names must be between 3 and 24 characters
// in length and use numbers and lower-case letters only.
func (client AccountsClient) CheckNameAvailability(accountName AccountCheckNameAvailabilityParameters) (result CheckNameAvailabilityResult, ae error) {
	req, err := client.CheckNameAvailabilityPreparer(accountName)
	if err != nil {
		return result, autorest.NewErrorWithError(err, "storage/AccountsClient", "CheckNameAvailability", autorest.UndefinedStatusCode, "Failure preparing request")
	}

	resp, err := client.CheckNameAvailabilitySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "storage/AccountsClient", "CheckNameAvailability", resp.StatusCode, "Failure sending request")
	}

	result, err = client.CheckNameAvailabilityResponder(resp)
	if err != nil {
		ae = autorest.NewErrorWithError(err, "storage/AccountsClient", "CheckNameAvailability", resp.StatusCode, "Failure responding to request")
	}

	return
}
Example #5
0
// ListKeys lists the access keys for the specified storage account.
//
// resourceGroupName is the name of the resource group. accountName is the
// name of the storage account.
func (client AccountsClient) ListKeys(resourceGroupName string, accountName string) (result AccountKeys, ae error) {
	req, err := client.ListKeysPreparer(resourceGroupName, accountName)
	if err != nil {
		return result, autorest.NewErrorWithError(err, "storage/AccountsClient", "ListKeys", autorest.UndefinedStatusCode, "Failure preparing request")
	}

	resp, err := client.ListKeysSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "storage/AccountsClient", "ListKeys", resp.StatusCode, "Failure sending request")
	}

	result, err = client.ListKeysResponder(resp)
	if err != nil {
		ae = autorest.NewErrorWithError(err, "storage/AccountsClient", "ListKeys", resp.StatusCode, "Failure responding to request")
	}

	return
}
Example #6
0
// List lists all the storage accounts available under the subscription. Note
// that storage keys are not returned; use the ListKeys operation for this.
func (client AccountsClient) List() (result AccountListResult, ae error) {
	req, err := client.ListPreparer()
	if err != nil {
		return result, autorest.NewErrorWithError(err, "storage/AccountsClient", "List", autorest.UndefinedStatusCode, "Failure preparing request")
	}

	resp, err := client.ListSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "storage/AccountsClient", "List", resp.StatusCode, "Failure sending request")
	}

	result, err = client.ListResponder(resp)
	if err != nil {
		ae = autorest.NewErrorWithError(err, "storage/AccountsClient", "List", resp.StatusCode, "Failure responding to request")
	}

	return
}
Example #7
0
// WithAuthorization returns a PrepareDecorator that adds an HTTP Authorization header whose
// value is "Bearer " followed by the AccessToken of the ServicePrincipalToken.
//
// By default, the token will automatically refresh if nearly expired (as determined by the
// RefreshWithin interval). Use the AutoRefresh method to enable or disable automatically refreshing
// tokens.
func (spt *ServicePrincipalToken) WithAuthorization() autorest.PrepareDecorator {
	return func(p autorest.Preparer) autorest.Preparer {
		return autorest.PreparerFunc(func(r *http.Request) (*http.Request, error) {
			if spt.autoRefresh {
				err := spt.EnsureFresh()
				if err != nil {
					return r, autorest.NewErrorWithError(err,
						"azure.ServicePrincipalToken", "WithAuthorization", autorest.UndefinedStatusCode, "Failed to refresh Service Principal Token for request to %s",
						r.URL)
				}
			}
			return (autorest.WithBearerAuthorization(spt.AccessToken)(p)).Prepare(r)
		})
	}
}