Example #1
0
func (s *MemoryGroup) Apply(d *cgroupData) (err error) {
	path, err := d.path("memory")
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}
	if memoryAssigned(d.config) {
		if path != "" {
			if err := os.MkdirAll(path, 0755); err != nil {
				return err
			}
		}

		if err := s.Set(path, d.config); err != nil {
			return err
		}
	}

	defer func() {
		if err != nil {
			os.RemoveAll(path)
		}
	}()

	// We need to join memory cgroup after set memory limits, because
	// kmem.limit_in_bytes can only be set when the cgroup is empty.
	_, err = d.join("memory")
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}

	return nil
}
Example #2
0
func (s *MemoryGroup) Apply(d *cgroupData) (err error) {
	path, err := d.path("memory")
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}
	if memoryAssigned(d.config) {
		if path != "" {
			if err := os.MkdirAll(path, 0755); err != nil {
				return err
			}
		}
		// We have to set kernel memory here, as we can't change it once
		// processes have been attached.
		if err := s.SetKernelMemory(path, d.config); err != nil {
			return err
		}
	}

	defer func() {
		if err != nil {
			os.RemoveAll(path)
		}
	}()

	// We need to join memory cgroup after set memory limits, because
	// kmem.limit_in_bytes can only be set when the cgroup is empty.
	_, err = d.join("memory")
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}
	return nil
}
Example #3
0
func (m *Manager) Apply(pid int) (err error) {
	if m.Cgroups == nil {
		return nil
	}

	var c = m.Cgroups

	d, err := getCgroupData(m.Cgroups, pid)
	if err != nil {
		return err
	}

	if c.Paths != nil {
		paths := make(map[string]string)
		for name, path := range c.Paths {
			_, err := d.path(name)
			if err != nil {
				if cgroups.IsNotFound(err) {
					continue
				}
				return err
			}
			paths[name] = path
		}
		m.Paths = paths
		return cgroups.EnterPid(m.Paths, pid)
	}

	paths := make(map[string]string)
	defer func() {
		if err != nil {
			cgroups.RemovePaths(paths)
		}
	}()
	for _, sys := range subsystems {
		if err := sys.Apply(d); err != nil {
			return err
		}
		// TODO: Apply should, ideally, be reentrant or be broken up into a separate
		// create and join phase so that the cgroup hierarchy for a container can be
		// created then join consists of writing the process pids to cgroup.procs
		p, err := d.path(sys.Name())
		if err != nil {
			if cgroups.IsNotFound(err) {
				continue
			}
			return err
		}
		paths[sys.Name()] = p
	}
	m.Paths = paths
	return nil
}
Example #4
0
func (m *Manager) Apply(pid int) (err error) {
	if m.Cgroups == nil {
		return nil
	}

	var c = m.Cgroups

	d, err := getCgroupData(m.Cgroups, pid)
	if err != nil {
		return err
	}

	if c.Paths != nil {
		paths := make(map[string]string)
		for name, path := range c.Paths {
			_, err := d.path(name)
			if err != nil {
				if cgroups.IsNotFound(err) {
					continue
				}
				return err
			}
			paths[name] = path
		}
		m.Paths = paths
		return cgroups.EnterPid(m.Paths, pid)
	}

	m.mu.Lock()
	defer m.mu.Unlock()
	paths := make(map[string]string)
	for _, sys := range subsystems {
		if err := sys.Apply(d); err != nil {
			return err
		}
		// TODO: Apply should, ideally, be reentrant or be broken up into a separate
		// create and join phase so that the cgroup hierarchy for a container can be
		// created then join consists of writing the process pids to cgroup.procs
		p, err := d.path(sys.Name())
		if err != nil {
			// The non-presence of the devices subsystem is
			// considered fatal for security reasons.
			if cgroups.IsNotFound(err) && sys.Name() != "devices" {
				continue
			}
			return err
		}
		paths[sys.Name()] = p
	}
	m.Paths = paths
	return nil
}
Example #5
0
func joinNetPrio(c *configs.Cgroup, pid int) error {
	_, err := join(c, "net_prio", pid)
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}
	return nil
}
Example #6
0
func (s *FreezerGroup) Apply(d *cgroupData) error {
	_, err := d.join("freezer")
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}
	return nil
}
Example #7
0
func (m *Manager) Set(container *configs.Config) error {
	for _, sys := range subsystems {
		// We can't set this here, because after being applied, memcg doesn't
		// allow a non-empty cgroup from having its limits changed.
		if sys.Name() == "memory" {
			continue
		}

		// Generate fake cgroup data.
		d, err := getCgroupData(container.Cgroups, -1)
		if err != nil {
			return err
		}
		// Get the path, but don't error out if the cgroup wasn't found.
		path, err := d.path(sys.Name())
		if err != nil && !cgroups.IsNotFound(err) {
			return err
		}

		if err := sys.Set(path, container.Cgroups); err != nil {
			return err
		}
	}

	if m.Paths["cpu"] != "" {
		if err := CheckCpushares(m.Paths["cpu"], container.Cgroups.Resources.CpuShares); err != nil {
			return err
		}
	}
	return nil
}
Example #8
0
func (s *PerfEventGroup) Apply(d *cgroupData) error {
	// we just want to join this group even though we don't set anything
	if _, err := d.join("perf_event"); err != nil && !cgroups.IsNotFound(err) {
		return err
	}
	return nil
}
Example #9
0
func (s *MemoryGroup) Apply(d *data) error {
	path, err := d.path("memory")
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}
	if err := os.MkdirAll(path, 0755); err != nil && !os.IsExist(err) {
		return err
	}
	if err := s.Set(path, d.c); err != nil {
		return err
	}

	// We need to join memory cgroup after set memory limits, because
	// kmem.limit_in_bytes can only be set when the cgroup is empty.
	_, err = d.join("memory")
	if err != nil {
		return err
	}
	defer func() {
		if err != nil {
			os.RemoveAll(path)
		}
	}()

	return nil
}
Example #10
0
func joinPerfEvent(c *configs.Cgroup, pid int) error {
	_, err := join(c, "perf_event", pid)
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}
	return nil
}
Example #11
0
func joinHugetlb(c *configs.Cgroup, pid int) error {
	_, err := join(c, "hugetlb", pid)
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}
	return nil
}
Example #12
0
func joinPids(c *configs.Cgroup, pid int) error {
	_, err := join(c, "pids", pid)
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}
	return nil
}
Example #13
0
func (s *NetClsGroup) Apply(d *cgroupData) error {
	_, err := d.join("net_cls")
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}
	return nil
}
Example #14
0
func joinFreezer(c *configs.Cgroup, pid int) error {
	_, err := join(c, "freezer", pid)
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}
	return nil
}
Example #15
0
func (s *PidsGroup) Apply(d *cgroupData) error {
	_, err := d.join("pids")
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}
	return nil
}
Example #16
0
func (s *BlkioGroup) Apply(d *cgroupData) error {
	_, err := d.join("blkio")
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}
	return nil
}
Example #17
0
func (m *Manager) Set(container *configs.Config) error {
	// If Paths are set, then we are just joining cgroups paths
	// and there is no need to set any values.
	if m.Cgroups.Paths != nil {
		return nil
	}
	for _, sys := range subsystems {
		// Get the subsystem path, but don't error out for not found cgroups.
		path, err := getSubsystemPath(container.Cgroups, sys.Name())
		if err != nil && !cgroups.IsNotFound(err) {
			return err
		}

		if err := sys.Set(path, container.Cgroups); err != nil {
			return err
		}
	}

	if m.Paths["cpu"] != "" {
		if err := fs.CheckCpushares(m.Paths["cpu"], container.Cgroups.Resources.CpuShares); err != nil {
			return err
		}
	}
	return nil
}
Example #18
0
func (s *HugetlbGroup) Apply(d *cgroupData) error {
	_, err := d.join("hugetlb")
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}
	return nil
}
Example #19
0
func (s *CpusetGroup) Apply(d *cgroupData) error {
	dir, err := d.path("cpuset")
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}
	return s.ApplyDir(dir, d.config, d.pid)
}
func joinMemory(c *configs.Cgroup, pid int) error {
	path, err := getSubsystemPath(c, "memory")
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}

	// -1 disables memoryswap
	if c.MemorySwap > 0 {
		err = writeFile(path, "memory.memsw.limit_in_bytes", strconv.FormatInt(c.MemorySwap, 10))
		if err != nil {
			return err
		}
	}
	if c.OomKillDisable {
		if err := writeFile(path, "memory.oom_control", "1"); err != nil {
			return err
		}
	}

	if c.MemorySwappiness >= 0 && c.MemorySwappiness <= 100 {
		err = writeFile(path, "memory.swappiness", strconv.FormatInt(c.MemorySwappiness, 10))
		if err != nil {
			return err
		}
	} else if c.MemorySwappiness == -1 {
		return nil
	} else {
		return fmt.Errorf("invalid value:%d. valid memory swappiness range is 0-100", c.MemorySwappiness)
	}

	return nil
}
func joinCpu(c *configs.Cgroup, pid int) error {
	path, err := getSubsystemPath(c, "cpu")
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}
	if c.CpuQuota != 0 {
		if err = writeFile(path, "cpu.cfs_quota_us", strconv.FormatInt(c.CpuQuota, 10)); err != nil {
			return err
		}
	}
	if c.CpuPeriod != 0 {
		if err = writeFile(path, "cpu.cfs_period_us", strconv.FormatInt(c.CpuPeriod, 10)); err != nil {
			return err
		}
	}
	if c.CpuRtPeriod != 0 {
		if err = writeFile(path, "cpu.rt_period_us", strconv.FormatInt(c.CpuRtPeriod, 10)); err != nil {
			return err
		}
	}
	if c.CpuRtRuntime != 0 {
		if err = writeFile(path, "cpu.rt_runtime_us", strconv.FormatInt(c.CpuRtRuntime, 10)); err != nil {
			return err
		}
	}

	return nil
}
Example #22
0
func (m *Manager) Set(container *configs.Config) error {
	for _, sys := range subsystems {
		// Generate fake cgroup data.
		d, err := getCgroupData(container.Cgroups, -1)
		if err != nil {
			return err
		}
		// Get the path, but don't error out if the cgroup wasn't found.
		path, err := d.path(sys.Name())
		if err != nil && !cgroups.IsNotFound(err) {
			return err
		}

		if err := sys.Set(path, container.Cgroups); err != nil {
			return err
		}
	}

	if m.Paths["cpu"] != "" {
		if err := CheckCpushares(m.Paths["cpu"], container.Cgroups.Resources.CpuShares); err != nil {
			return err
		}
	}
	return nil
}
Example #23
0
func (s *CpuacctGroup) Apply(d *data) error {
	// we just want to join this group even though we don't set anything
	if _, err := d.join("cpuacct"); err != nil && !cgroups.IsNotFound(err) {
		return err
	}

	return nil
}
Example #24
0
func setKernelMemory(c *configs.Cgroup) error {
	path, err := getSubsystemPath(c, "memory")
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}

	return os.MkdirAll(path, 0755)
}
func joinHugetlb(c *configs.Cgroup, pid int) error {
	path, err := join(c, "hugetlb", pid)
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}

	hugetlb := subsystems["hugetlb"]
	return hugetlb.Set(path, c)
}
func joinNetCls(c *configs.Cgroup, pid int) error {
	path, err := join(c, "net_cls", pid)
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}
	netcls := subsystems["net_cls"]

	return netcls.Set(path, c)
}
func joinNetPrio(c *configs.Cgroup, pid int) error {
	path, err := join(c, "net_prio", pid)
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}
	netPrio := subsystems["net_prio"]

	return netPrio.Set(path, c)
}
func joinFreezer(c *configs.Cgroup, pid int) error {
	path, err := join(c, "freezer", pid)
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}

	freezer := subsystems["freezer"]
	return freezer.Set(path, c)
}
Example #29
0
File: cpu.go Project: nkwilson/runc
func (s *CpuGroup) Apply(d *cgroupData) error {
	// We always want to join the cpu group, to allow fair cpu scheduling
	// on a container basis
	path, err := d.path("cpu")
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}
	return s.ApplyDir(path, d.config, d.pid)
}
Example #30
0
func (s *CpuGroup) Apply(d *cgroupData) error {
	// We always want to join the cpu group, to allow fair cpu scheduling
	// on a container basis
	_, err := d.join("cpu")
	if err != nil && !cgroups.IsNotFound(err) {
		return err
	}
	return nil
}