Example #1
0
func (m *InterfaceManager) setupAffectedSnaps(task *state.Task, affectingSnap string, affectedSnaps []string) error {
	st := task.State()

	// Setup security of the affected snaps.
	for _, affectedSnapName := range affectedSnaps {
		// the snap that triggered the change needs to be skipped
		if affectedSnapName == affectingSnap {
			continue
		}
		var snapst snapstate.SnapState
		if err := snapstate.Get(st, affectedSnapName, &snapst); err != nil {
			return err
		}
		affectedSnapInfo, err := snapst.CurrentInfo()
		if err != nil {
			return err
		}
		snap.AddImplicitSlots(affectedSnapInfo)
		opts := confinementOptions(snapst.Flags)
		if err := setupSnapSecurity(task, affectedSnapInfo, opts, m.repo); err != nil {
			return err
		}
	}
	return nil
}
Example #2
0
func (m *InterfaceManager) doDisconnect(task *state.Task, _ *tomb.Tomb) error {
	st := task.State()
	st.Lock()
	defer st.Unlock()

	plugRef, slotRef, err := getPlugAndSlotRefs(task)
	if err != nil {
		return err
	}

	conns, err := getConns(st)
	if err != nil {
		return err
	}

	var affectedConns []interfaces.ConnRef
	if plugRef.Snap != "" && plugRef.Name != "" && slotRef.Snap != "" && slotRef.Name != "" {
		if err := m.repo.Disconnect(plugRef.Snap, plugRef.Name, slotRef.Snap, slotRef.Name); err != nil {
			return err
		}
		affectedConns = []interfaces.ConnRef{{plugRef, slotRef}}
	} else if plugRef.Name != "" && slotRef.Snap == "" && slotRef.Name == "" {
		// NOTE: plugRef.Snap can be either empty or not, Connected handles both
		affectedConns, err = m.repo.Connected(plugRef.Snap, plugRef.Name)
		if err != nil {
			return err
		}
		m.repo.DisconnectAll(affectedConns)
	} else if plugRef.Snap == "" && plugRef.Name == "" && slotRef.Name != "" {
		// Symmetrically, slotRef.Snap can be either empty or not
		affectedConns, err = m.repo.Connected(slotRef.Snap, slotRef.Name)
		if err != nil {
			return err
		}
		m.repo.DisconnectAll(affectedConns)
	} else {
		return fmt.Errorf("internal error, unhandled disconnect case plug: %q, slot: %q", plugRef, slotRef)
	}
	affectedSnaps := snapNamesFromConns(affectedConns)
	for _, snapName := range affectedSnaps {
		var snapst snapstate.SnapState
		if err := snapstate.Get(st, snapName, &snapst); err != nil {
			return err
		}
		snapInfo, err := snapst.CurrentInfo()
		if err != nil {
			return err
		}
		opts := confinementOptions(snapst.Flags)
		if err := setupSnapSecurity(task, snapInfo, opts, m.repo); err != nil {
			return &state.Retry{}
		}
	}
	for _, conn := range affectedConns {
		delete(conns, conn.ID())
	}

	setConns(st, conns)
	return nil
}
Example #3
0
func (m *SnapManager) doUnlinkCurrentSnap(t *state.Task, _ *tomb.Tomb) error {
	st := t.State()

	st.Lock()
	defer st.Unlock()

	ss, snapst, err := snapSetupAndState(t)
	if err != nil {
		return err
	}

	oldInfo, err := snapst.CurrentInfo()
	if err != nil {
		return err
	}

	snapst.Active = false

	pb := &TaskProgressAdapter{task: t}
	st.Unlock() // pb itself will ask for locking
	err = m.backend.UnlinkSnap(oldInfo, pb)
	st.Lock()
	if err != nil {
		return err
	}

	// mark as inactive
	Set(st, ss.Name(), snapst)
	return nil
}
Example #4
0
func submitSerialRequest(t *state.Task, serialRequest string, client *http.Client) (*asserts.Serial, error) {
	st := t.State()
	st.Unlock()
	defer st.Lock()
	resp, err := client.Post(serialRequestURL, asserts.MediaType, bytes.NewBufferString(serialRequest))
	if err != nil {
		return nil, retryErr(t, "cannot deliver device serial request: %v", err)
	}
	defer resp.Body.Close()

	switch resp.StatusCode {
	case 200, 201:
	case 202:
		return nil, errPoll
	default:
		return nil, retryErr(t, "cannot deliver device serial request: unexpected status %d", resp.StatusCode)
	}

	// decode body with serial assertion
	dec := asserts.NewDecoder(resp.Body)
	got, err := dec.Decode()
	if err != nil { // assume broken i/o
		return nil, retryErr(t, "cannot read response to request for a serial: %v", err)
	}

	serial, ok := got.(*asserts.Serial)
	if !ok {
		return nil, fmt.Errorf("cannot use device serial assertion of type %q", got.Type().Name)
	}

	return serial, nil
}
Example #5
0
func (m *SnapManager) doSetupAliases(t *state.Task, _ *tomb.Tomb) error {
	st := t.State()
	st.Lock()
	defer st.Unlock()
	snapsup, snapst, err := snapSetupAndState(t)
	if err != nil {
		return err
	}
	snapName := snapsup.Name()
	curInfo, err := snapst.CurrentInfo()
	if err != nil {
		return err
	}
	aliasStatuses, err := getAliases(st, snapName)
	if err != nil && err != state.ErrNoState {
		return err
	}
	var aliases []*backend.Alias
	for alias, aliasStatus := range aliasStatuses {
		if aliasStatus == "enabled" {
			aliasApp := curInfo.Aliases[alias]
			if aliasApp == nil {
				// not a known alias anymore, skip
				continue
			}
			aliases = append(aliases, &backend.Alias{
				Name:   alias,
				Target: filepath.Base(aliasApp.WrapperPath()),
			})
		}
	}
	st.Unlock()
	defer st.Lock()
	return m.backend.UpdateAliases(aliases, nil)
}
Example #6
0
func (m *DeviceManager) doGenerateDeviceKey(t *state.Task, _ *tomb.Tomb) error {
	st := t.State()
	st.Lock()
	defer st.Unlock()

	device, err := auth.Device(st)
	if err != nil {
		return err
	}

	if device.KeyID != "" {
		// nothing to do
		return nil
	}

	keyPair, err := rsa.GenerateKey(rand.Reader, keyLength)
	if err != nil {
		return fmt.Errorf("cannot generate device key pair: %v", err)
	}

	privKey := asserts.RSAPrivateKey(keyPair)
	err = m.keypairMgr.Put(privKey)
	if err != nil {
		return fmt.Errorf("cannot store device key pair: %v", err)
	}

	device.KeyID = privKey.PublicKey().ID()
	err = auth.SetDevice(st, device)
	if err != nil {
		return err
	}
	t.SetStatus(state.DoneStatus)
	return nil
}
Example #7
0
func (p4 patch4T) mangle(task *state.Task) error {
	snapsup, snapst, err := p4.snapSetupAndState(task)
	if err != nil {
		return err
	}

	var hadCandidate bool
	if err := p4.getMaybe(task, "had-candidate", &hadCandidate); err != nil && err != state.ErrNoState {
		return err
	}

	if hadCandidate {
		change := task.Change()
		if change.Kind() != "revert-snap" {
			return fmt.Errorf("had-candidate true for task %s (%s) of non-revert change %s (%s)",
				task.ID(), task.Kind(), change.ID(), change.Kind())
		}
	}

	task.Clear("had-candidate")

	task.Set("old-candidate-index", snapst.LastIndex(snapsup.SideInfo.Revision))

	return nil
}
Example #8
0
func (m *InterfaceManager) undoSetupProfiles(task *state.Task, tomb *tomb.Tomb) error {
	st := task.State()
	st.Lock()
	defer st.Unlock()

	ss, err := snapstate.TaskSnapSetup(task)
	if err != nil {
		return err
	}
	snapName := ss.Name()

	// Get the name from SnapSetup and use it to find the current SideInfo
	// about the snap, if there is one.
	var snapst snapstate.SnapState
	err = snapstate.Get(st, snapName, &snapst)
	if err != nil && err != state.ErrNoState {
		return err
	}
	sideInfo := snapst.CurrentSideInfo()
	if sideInfo == nil {
		// The snap was not installed before so undo should remove security profiles.
		return m.removeProfilesForSnap(task, tomb, snapName)
	} else {
		// The snap was installed before so undo should setup the old security profiles.
		snapInfo, err := snap.ReadInfo(snapName, sideInfo)
		if err != nil {
			return err
		}
		return m.setupProfilesForSnap(task, tomb, snapInfo, snapst.DevMode)
	}
}
Example #9
0
func (m *SnapManager) doPrepareSnap(t *state.Task, _ *tomb.Tomb) error {
	st := t.State()
	st.Lock()
	ss, snapst, err := snapSetupAndState(t)
	st.Unlock()
	if err != nil {
		return err
	}

	if ss.Revision().Unset() {
		// Local revisions start at -1 and go down.
		revision := snapst.LocalRevision()
		if revision.Unset() || revision.N > 0 {
			revision = snap.R(-1)
		} else {
			revision.N--
		}
		if !revision.Local() {
			panic("internal error: invalid local revision built: " + revision.String())
		}
		ss.SideInfo.Revision = revision
	}

	st.Lock()
	t.Set("snap-setup", ss)
	st.Unlock()
	return nil
}
Example #10
0
func (m *SnapManager) doUnlinkSnap(t *state.Task, _ *tomb.Tomb) error {
	// invoked only if snap has a current active revision

	st := t.State()

	st.Lock()
	defer st.Unlock()

	ss, snapst, err := snapSetupAndState(t)
	if err != nil {
		return err
	}

	info, err := Info(t.State(), ss.Name(), ss.Revision())
	if err != nil {
		return err
	}

	pb := &TaskProgressAdapter{task: t}
	st.Unlock() // pb itself will ask for locking
	err = m.backend.UnlinkSnap(info, pb)
	st.Lock()
	if err != nil {
		return err
	}

	// mark as inactive
	snapst.Active = false
	Set(st, ss.Name(), snapst)
	return nil
}
Example #11
0
func (m *SnapManager) doClearSnapData(t *state.Task, _ *tomb.Tomb) error {
	t.State().Lock()
	ss, snapst, err := snapSetupAndState(t)
	t.State().Unlock()
	if err != nil {
		return err
	}

	t.State().Lock()
	info, err := Info(t.State(), ss.Name(), ss.Revision())
	t.State().Unlock()
	if err != nil {
		return err
	}

	if err = m.backend.RemoveSnapData(info); err != nil {
		return err
	}

	// Only remove data common between versions if this is the last version
	if len(snapst.Sequence) == 1 {
		if err = m.backend.RemoveSnapCommonData(info); err != nil {
			return err
		}
	}

	return nil
}
Example #12
0
func (m *SnapManager) undoUnlinkCurrentSnap(t *state.Task, _ *tomb.Tomb) error {
	st := t.State()

	st.Lock()
	defer st.Unlock()

	ss, snapst, err := snapSetupAndState(t)
	if err != nil {
		return err
	}

	oldInfo, err := snapst.CurrentInfo()
	if err != nil {
		return err
	}

	snapst.Active = true
	st.Unlock()
	err = m.backend.LinkSnap(oldInfo)
	st.Lock()
	if err != nil {
		return err
	}

	// mark as active again
	Set(st, ss.Name(), snapst)

	return nil

}
Example #13
0
func (m *SnapManager) cleanupCopySnapData(t *state.Task, _ *tomb.Tomb) error {
	st := t.State()

	st.Lock()
	defer st.Unlock()

	if t.Status() != state.DoneStatus {
		// it failed
		return nil
	}

	_, snapst, err := snapSetupAndState(t)
	if err != nil {
		return err
	}

	info, err := snapst.CurrentInfo()
	if err != nil {
		return err
	}

	m.backend.ClearTrashedData(info)

	return nil
}
Example #14
0
func (m *DeviceManager) doMarkSeeded(t *state.Task, _ *tomb.Tomb) error {
	st := t.State()
	st.Lock()
	defer st.Unlock()

	st.Set("seeded", true)
	return nil
}
Example #15
0
func (m *InterfaceManager) doSetupProfiles(task *state.Task, _ *tomb.Tomb) error {
	task.State().Lock()
	defer task.State().Unlock()

	// Get snap.Info from bits handed by the snap manager.
	ss, err := snapstate.TaskSnapSetup(task)
	if err != nil {
		return err
	}

	snapInfo, err := snap.ReadInfo(ss.Name(), ss.SideInfo)
	if err != nil {
		return err
	}
	snap.AddImplicitSlots(snapInfo)
	snapName := snapInfo.Name()

	// The snap may have been updated so perform the following operation to
	// ensure that we are always working on the correct state:
	//
	// - disconnect all connections to/from the given snap
	//   - remembering the snaps that were affected by this operation
	// - remove the (old) snap from the interfaces repository
	// - add the (new) snap to the interfaces repository
	// - restore connections based on what is kept in the state
	//   - if a connection cannot be restored then remove it from the state
	// - setup the security of all the affected snaps
	affectedSnaps, err := m.repo.DisconnectSnap(snapName)
	if err != nil {
		return err
	}
	// XXX: what about snap renames? We should remove the old name (or switch
	// to IDs in the interfaces repository)
	if err := m.repo.RemoveSnap(snapName); err != nil {
		return err
	}
	if err := m.repo.AddSnap(snapInfo); err != nil {
		if _, ok := err.(*interfaces.BadInterfacesError); ok {
			logger.Noticef("%s", err)
		} else {
			return err
		}
	}
	if err := m.reloadConnections(snapName); err != nil {
		return err
	}
	// FIXME: here we should not reconnect auto-connect plug/slot
	// pairs that were explicitly disconnected by the user
	if err := m.autoConnect(task, snapName, nil); err != nil {
		return err
	}
	if err := setupSnapSecurity(task, snapInfo, ss.DevModeAllowed(), m.repo); err != nil {
		return err
	}

	return m.setupAffectedSnaps(task, snapName, affectedSnaps)
}
Example #16
0
func checkTaskLogContains(c *C, task *state.Task, pattern *regexp.Regexp) {
	found := false
	for _, message := range task.Log() {
		if pattern.MatchString(message) {
			found = true
		}
	}

	c.Check(found, Equals, true, Commentf("Expected to find regex %q in task log: %v", pattern, task.Log()))
}
Example #17
0
func getPlugAndSlotRefs(task *state.Task) (interfaces.PlugRef, interfaces.SlotRef, error) {
	var plugRef interfaces.PlugRef
	var slotRef interfaces.SlotRef
	if err := task.Get("plug", &plugRef); err != nil {
		return plugRef, slotRef, err
	}
	if err := task.Get("slot", &slotRef); err != nil {
		return plugRef, slotRef, err
	}
	return plugRef, slotRef, nil
}
Example #18
0
func snapSetupAndState(t *state.Task) (*SnapSetup, *SnapState, error) {
	ss, err := TaskSnapSetup(t)
	if err != nil {
		return nil, nil, err
	}
	var snapst SnapState
	err = Get(t.State(), ss.Name(), &snapst)
	if err != nil && err != state.ErrNoState {
		return nil, nil, err
	}
	return ss, &snapst, nil
}
Example #19
0
func (m *SnapManager) doRemoveAliases(t *state.Task, _ *tomb.Tomb) error {
	st := t.State()
	st.Lock()
	defer st.Unlock()
	snapsup, _, err := snapSetupAndState(t)
	if err != nil {
		return err
	}
	snapName := snapsup.Name()
	st.Unlock()
	defer st.Lock()
	return m.backend.RemoveSnapAliases(snapName)
}
Example #20
0
func removeSnapSecurity(task *state.Task, snapName string) error {
	st := task.State()
	for _, backend := range backends.All {
		st.Unlock()
		err := backend.Remove(snapName)
		st.Lock()
		if err != nil {
			task.Errorf("cannot setup %s for snap %q: %s", backend.Name(), snapName, err)
			return err
		}
	}
	return nil
}
Example #21
0
func prepareSerialRequest(t *state.Task, privKey asserts.PrivateKey, device *auth.DeviceState, client *http.Client, cfg *serialRequestConfig) (string, error) {
	st := t.State()
	st.Unlock()
	defer st.Lock()

	req, err := http.NewRequest("POST", cfg.requestIDURL, nil)
	if err != nil {
		return "", fmt.Errorf("internal error: cannot create request-id request %q", cfg.requestIDURL)
	}
	cfg.applyHeaders(req)

	resp, err := client.Do(req)
	if err != nil {
		return "", retryErr(t, "cannot retrieve request-id for making a request for a serial: %v", err)
	}
	defer resp.Body.Close()
	if resp.StatusCode != 200 {
		return "", retryErr(t, "cannot retrieve request-id for making a request for a serial: unexpected status %d", resp.StatusCode)
	}

	dec := json.NewDecoder(resp.Body)
	var requestID requestIDResp
	err = dec.Decode(&requestID)
	if err != nil { // assume broken i/o
		return "", retryErr(t, "cannot read response with request-id for making a request for a serial: %v", err)
	}

	encodedPubKey, err := asserts.EncodePublicKey(privKey.PublicKey())
	if err != nil {
		return "", fmt.Errorf("internal error: cannot encode device public key: %v", err)

	}

	headers := map[string]interface{}{
		"brand-id":   device.Brand,
		"model":      device.Model,
		"request-id": requestID.RequestID,
		"device-key": string(encodedPubKey),
	}
	if cfg.proposedSerial != "" {
		headers["serial"] = cfg.proposedSerial
	}

	serialReq, err := asserts.SignWithoutAuthority(asserts.SerialRequestType, headers, cfg.body, privKey)
	if err != nil {
		return "", err
	}

	return string(asserts.Encode(serialReq)), nil
}
Example #22
0
func (m *InterfaceManager) doRemoveProfiles(task *state.Task, tomb *tomb.Tomb) error {
	st := task.State()
	st.Lock()
	defer st.Unlock()

	// Get SnapSetup for this snap. This is gives us the name of the snap.
	snapSetup, err := snapstate.TaskSnapSetup(task)
	if err != nil {
		return err
	}
	snapName := snapSetup.Name()

	return m.removeProfilesForSnap(task, tomb, snapName)
}
Example #23
0
func setupSnapSecurity(task *state.Task, snapInfo *snap.Info, devMode bool, repo *interfaces.Repository) error {
	st := task.State()
	snapName := snapInfo.Name()

	for _, backend := range backends.All {
		st.Unlock()
		err := backend.Setup(snapInfo, devMode, repo)
		st.Lock()
		if err != nil {
			task.Errorf("cannot setup %s for snap %q: %s", backend.Name(), snapName, err)
			return err
		}
	}
	return nil
}
Example #24
0
func (p4 patch4T) addRevertFlag(task *state.Task) error {
	var snapsup patch4SnapSetup
	err := p4.getMaybe(task, "snap-setup", &snapsup)
	switch err {
	case nil:
		snapsup.Flags |= patch4FlagRevert

		// save it back
		task.Set("snap-setup", &snapsup)
		return nil
	case state.ErrNoState:
		return nil
	default:
		return err
	}
}
Example #25
0
func (m *InterfaceManager) doSetupProfiles(task *state.Task, tomb *tomb.Tomb) error {
	task.State().Lock()
	defer task.State().Unlock()

	// Get snap.Info from bits handed by the snap manager.
	ss, err := snapstate.TaskSnapSetup(task)
	if err != nil {
		return err
	}

	snapInfo, err := snap.ReadInfo(ss.Name(), ss.SideInfo)
	if err != nil {
		return err
	}
	return m.setupProfilesForSnap(task, tomb, snapInfo, ss.DevModeAllowed())
}
Example #26
0
func (m *SnapManager) doDownloadSnap(t *state.Task, tomb *tomb.Tomb) error {
	st := t.State()
	st.Lock()
	snapsup, err := TaskSnapSetup(t)
	st.Unlock()
	if err != nil {
		return err
	}

	meter := &TaskProgressAdapter{task: t}

	st.Lock()
	theStore := Store(st)
	user, err := userFromUserID(st, snapsup.UserID)
	st.Unlock()
	if err != nil {
		return err
	}

	targetFn := snapsup.MountFile()
	if snapsup.DownloadInfo == nil {
		var storeInfo *snap.Info
		// COMPATIBILITY - this task was created from an older version
		// of snapd that did not store the DownloadInfo in the state
		// yet.
		storeInfo, err = theStore.Snap(snapsup.Name(), snapsup.Channel, snapsup.DevModeAllowed(), snapsup.Revision(), user)
		if err != nil {
			return err
		}
		err = theStore.Download(tomb.Context(nil), snapsup.Name(), targetFn, &storeInfo.DownloadInfo, meter, user)
		snapsup.SideInfo = &storeInfo.SideInfo
	} else {
		err = theStore.Download(tomb.Context(nil), snapsup.Name(), targetFn, snapsup.DownloadInfo, meter, user)
	}
	if err != nil {
		return err
	}

	snapsup.SnapPath = targetFn

	// update the snap setup for the follow up tasks
	st.Lock()
	t.Set("snap-setup", snapsup)
	st.Unlock()

	return nil
}
Example #27
0
// gget does the actual work of get and getMaybe
func (patch4T) gget(task *state.Task, key string, passThroughMissing bool, value interface{}) error {
	err := task.Get(key, value)
	if err == nil || (passThroughMissing && err == state.ErrNoState) {
		return err
	}
	change := task.Change()

	return fmt.Errorf("cannot get %q from task %s (%s) of change %s (%s): %v",
		key, task.ID(), task.Kind(), change.ID(), change.Kind(), err)
}
Example #28
0
func (m *SnapManager) doDownloadSnap(t *state.Task, _ *tomb.Tomb) error {
	st := t.State()
	st.Lock()
	ss, err := TaskSnapSetup(t)
	st.Unlock()
	if err != nil {
		return err
	}

	meter := &TaskProgressAdapter{task: t}

	st.Lock()
	theStore := Store(st)
	user, err := userFromUserID(st, ss.UserID)
	st.Unlock()
	if err != nil {
		return err
	}

	var downloadedSnapFile string
	if ss.DownloadInfo == nil {
		// COMPATIBILITY - this task was created from an older version
		// of snapd that did not store the DownloadInfo in the state
		// yet.
		storeInfo, err := theStore.Snap(ss.Name(), ss.Channel, ss.DevModeAllowed(), ss.Revision(), user)
		if err != nil {
			return err
		}
		downloadedSnapFile, err = theStore.Download(ss.Name(), &storeInfo.DownloadInfo, meter, user)
		ss.SideInfo = &storeInfo.SideInfo
	} else {
		downloadedSnapFile, err = theStore.Download(ss.Name(), ss.DownloadInfo, meter, user)
	}
	if err != nil {
		return err
	}

	ss.SnapPath = downloadedSnapFile
	// update the snap setup for the follow up tasks
	st.Lock()
	t.Set("snap-setup", ss)
	st.Unlock()

	return nil
}
Example #29
0
func (m *SnapManager) doSetAutoAliases(t *state.Task, _ *tomb.Tomb) error {
	st := t.State()
	st.Lock()
	defer st.Unlock()
	snapsup, snapst, err := snapSetupAndState(t)
	if err != nil {
		return err
	}
	snapName := snapsup.Name()
	curInfo, err := snapst.CurrentInfo()
	if err != nil {
		return err
	}
	aliasStatuses, err := getAliases(st, snapName)
	if err != nil && err != state.ErrNoState {
		return err
	}
	t.Set("old-aliases", aliasStatuses)
	if aliasStatuses == nil {
		aliasStatuses = make(map[string]string)
	}
	allNew, allRetired, err := AutoAliasesDelta(st, []string{snapName})
	if err != nil {
		return err
	}
	for _, alias := range allRetired[snapName] {
		delete(aliasStatuses, alias)
	}

	for _, alias := range allNew[snapName] {
		aliasApp := curInfo.Aliases[alias]
		if aliasApp == nil {
			// not a known alias anymore or yet, skip
			continue
		}
		// TODO: only mark/log conflict if this is an update instead of an install?
		err := checkAliasConflict(st, snapName, alias)
		if err != nil {
			return err
		}
		aliasStatuses[alias] = "auto"
	}
	setAliases(st, snapName, aliasStatuses)
	return nil
}
Example #30
0
func hookSetup(task *state.Task) (*HookSetup, *snapstate.SnapState, error) {
	var hooksup HookSetup
	err := task.Get("hook-setup", &hooksup)
	if err != nil {
		return nil, nil, fmt.Errorf("cannot extract hook setup from task: %s", err)
	}

	var snapst snapstate.SnapState
	err = snapstate.Get(task.State(), hooksup.Snap, &snapst)
	if err == state.ErrNoState {
		return nil, nil, fmt.Errorf("cannot find %q snap", hooksup.Snap)
	}
	if err != nil {
		return nil, nil, fmt.Errorf("cannot handle %q snap: %v", hooksup.Snap, err)
	}

	return &hooksup, &snapst, nil
}