// This is the approximate behavior of AWS SQS API. It seems a little weird in many cases, however, it works.
func ParseCreateQueueAttributes(sqsQuery *urlutils.SQSQuery) (*QueueAttributes, *sqserr.SQSError) {
var err *sqserr.SQSError
out := NewQueueAttributes()
attrs, err := urlutils.ParseNNotationAttr("Attribute.", sqsQuery.ParamsList, nil, NewReqQueueAttr)
if err != nil {
return nil, err
}
attrsSize := len(attrs)
for i := 1; i <= attrsSize; i++ {
v, ok := attrs[i]
if !ok {
return nil, sqserr.MalformedInputError("End of list found where not expected")
}
reqAttr, _ := v.(*ReqQueueAttr)
if reqAttr.Name == "" {
return nil, sqserr.MalformedInputError("End of list found where not expected")
}
if reqAttr.Value == "" {
return nil, sqserr.EmptyValueError("No Value Found for " + reqAttr.Name)
}
err = out.HandleAttribute(reqAttr.Name, reqAttr.Value)
if err != nil {
return nil, err
}
}
return out, nil
}
func SendMessageBatch(pq *pqueue.PQueue, sqsQuery *urlutils.SQSQuery) sqs_response.SQSResponse {
attrs, _ := urlutils.ParseNNotationAttr(
"SendMessageBatchRequestEntry.", sqsQuery.ParamsList, nil, NewReqQueueAttr)
attrsLen := len(attrs)
checker, err := validation.NewBatchIdValidation(attrsLen)
if err != nil {
return err
}
// map used to detect duplicated ids.
attrList := make([]*MessageBatchParams, 0, attrsLen)
for i := 1; i <= attrsLen; i++ {
a, ok := attrs[i]
if !ok {
return sqserr.MissingParameterError("The request is missing sequence %d", i)
}
p, _ := a.(*MessageBatchParams)
if err = checker.Validate(p.Id); err != nil {
return err
}
if err := validation.ValidateBatchRequestId(p.Id); err != nil {
return err
}
attrList = append(attrList, p)
}
batchResponse := &SendMessageBatchResponse{
RequestId: "rreer",
}
for _, a := range attrList {
resp := send_message.PushAMessage(pq, sqsQuery.SenderId, a.ParamsList)
if resp.HttpCode() == 200 {
batchResponse.ResultEntry = append(batchResponse.ResultEntry, resp.BatchResult(a.Id))
} else {
batchResponse.ErrorEntry = append(batchResponse.ErrorEntry, resp.BatchResult(a.Id))
}
}
return batchResponse
}
func ChangeMessageVisibilityBatch(pq *pqueue.PQueue, sqsQuery *urlutils.SQSQuery) sqs_response.SQSResponse {
attrs, _ := urlutils.ParseNNotationAttr(
"ChangeMessageVisibilityBatchRequestEntry.", sqsQuery.ParamsList,
nil, NewVisibilityBatchParams)
attrsLen := len(attrs)
checker, err := validation.NewBatchIdValidation(attrsLen)
if err != nil {
return err
}
attrList := make([]*VisibilityBatchParams, 0, attrsLen)
for i := 1; i <= attrsLen; i++ {
a, ok := attrs[i]
if !ok {
return sqserr.MissingParameterError("The request is missing sequence %d", i)
}
p, _ := a.(*VisibilityBatchParams)
if err = checker.Validate(p.Id); err != nil {
return err
}
attrList = append(attrList, p)
}
output := &ChangeMessageVisibilityBatchResponse{
RequestId: "visibilitybatch",
}
for _, batchItem := range attrList {
resp := pq.UpdateLockByRcpt(batchItem.ReceiptHandle, batchItem.VisibilityTimeout)
if resp == mpqerr.ERR_INVALID_RECEIPT {
e := sqserr.InvalidReceiptHandleError("The input receipt handle is not a valid receipt handle.")
output.ErrorEntry = append(output.ErrorEntry, e.BatchResult(batchItem.Id))
} else {
output.ResultEntry = append(output.ResultEntry, &OkChange{Id: batchItem.Id})
}
}
return output
}
func SetQueueAttributes(pq *pqueue.PQueue, sqsQuery *urlutils.SQSQuery) sqs_response.SQSResponse {
attrs, err := urlutils.ParseNNotationAttr("MessageAttribute.", sqsQuery.ParamsList, nil, NewAttribute)
if err != nil {
return err
}
attrsLen := len(attrs)
params := &pqueue.PQueueParams{}
for i := 1; i < attrsLen; i++ {
a, ok := attrs[i]
if !ok {
return sqserr.InvalidParameterValueError("The request must contain non-empty message attribute name.")
}
attr, _ := a.(*Attribute)
err = nil
switch attr.Name {
case "DelaySeconds":
if v, e := strconv.ParseInt(attr.Value, 10, 0); e == nil {
v := v * 1000
if v >= 0 && v <= conf.CFG_PQ.MaxDeliveryDelay {
params.DeliveryDelay = &v
continue
}
}
return sqserr.InvalidAttributeValueError(AttrErrText, attr.Name)
case "MaximumMessageSize":
if v, e := strconv.ParseInt(attr.Value, 10, 0); e == nil {
if v >= 1024 && v <= conf.CFG_PQ.MaxMessageSize {
params.MaxMsgSize = &v
continue
}
}
return sqserr.InvalidAttributeValueError(AttrErrText, attr.Name)
case "MessageRetentionPeriod":
if v, e := strconv.ParseInt(attr.Value, 10, 0); e == nil {
if v >= 60 && v <= 1209600 {
v := v * 1000
params.MsgTTL = &v
continue
}
}
return sqserr.InvalidAttributeValueError(AttrErrText, attr.Name)
case "ReceiveMessageWaitTimeSeconds":
if v, e := strconv.ParseInt(attr.Value, 10, 0); e == nil {
v := v * 1000
if v >= 60000 && v <= conf.CFG_PQ.MaxPopWaitTimeout {
params.PopWaitTimeout = &v
continue
}
}
return sqserr.InvalidAttributeValueError(AttrErrText, attr.Name)
case "VisibilityTimeout":
if v, e := strconv.ParseInt(attr.Value, 10, 0); e == nil {
v := v * 1000
if v > 0 && v <= conf.CFG_PQ.MaxLockTimeout {
params.PopLockTimeout = &v
continue
}
}
return sqserr.InvalidAttributeValueError(AttrErrText, attr.Name)
// These parameters are just ignored.
case "Policy":
case "ApproximateNumberOfMessages":
case "ApproximateNumberOfMessagesDelayed":
case "ApproximateNumberOfMessagesNotVisible":
case "CreatedTimestamp":
case "LastModifiedTimestamp":
case "QueueArn":
// Any unexpected attribute will produce unexpected attribute error.
default:
return sqserr.InvalidAttributeNameError("Unknown Attribute: %s", attr.Name)
}
}
pq.SetParams(params)
return &SetQueueAttributesResponse{
RequestId: "req",
}
}
func PushAMessage(pq *pqueue.PQueue, senderId string, paramList []string) sqs_response.SQSResponse {
out := &MessageParams{
DelaySeconds: -1,
MessageBody: "",
}
attrs, err := urlutils.ParseNNotationAttr("MessageAttribute.", paramList, out.Parse, NewReqQueueAttr)
if err != nil {
return err
}
attrsLen := len(attrs)
outAttrs := make(map[string]*sqsmsg.UserAttribute)
for i := 1; i <= attrsLen; i++ {
a, ok := attrs[i]
if !ok {
return sqserr.InvalidParameterValueError("The request must contain non-empty message attribute name.")
}
reqMsgAttr, _ := a.(*ReqMsgAttr)
sqs_err := validation.ValidateMessageAttrName(reqMsgAttr.Name)
if sqs_err != nil {
return sqs_err
}
sqs_err = validation.ValidateMessageAttrName(reqMsgAttr.DataType)
if sqs_err != nil {
return sqs_err
}
if reqMsgAttr.BinaryValue != "" && reqMsgAttr.StringValue != "" {
return sqserr.InvalidParameterValueError(
"Message attribute name '%s' has multiple values.", reqMsgAttr.Name)
}
if _, ok := outAttrs[reqMsgAttr.Name]; ok {
return sqserr.InvalidParameterValueError(
"Message attribute name '%s' already exists.", reqMsgAttr.Name)
}
if strings.HasPrefix(reqMsgAttr.DataType, "Number") {
if _, err := strconv.Atoi(reqMsgAttr.StringValue); err != nil {
return sqserr.InvalidParameterValueError(
"Could not cast message attribute '%s' value to number.", reqMsgAttr.Name)
}
}
if reqMsgAttr.BinaryValue != "" {
if reqMsgAttr.DataType != "Binary" {
return sqserr.InvalidParameterValueError(
"The message attribute '%s' with type 'Binary' must use field 'Binary'", reqMsgAttr.Name)
}
outAttrs[reqMsgAttr.Name] = &sqsmsg.UserAttribute{
Type: reqMsgAttr.DataType,
Value: reqMsgAttr.BinaryValue,
}
continue
}
if reqMsgAttr.StringValue != "" {
if reqMsgAttr.DataType != "String" && reqMsgAttr.DataType != "Number" {
return sqserr.InvalidParameterValueError(
"The message attribute '%s' with type 'String' must use field 'String'", reqMsgAttr.Name)
}
outAttrs[reqMsgAttr.Name] = &sqsmsg.UserAttribute{
Type: reqMsgAttr.DataType,
Value: reqMsgAttr.StringValue,
}
}
}
msgId := IdGen.RandId()
if out.DelaySeconds < 0 {
out.DelaySeconds = pq.Config().DeliveryDelay
} else if out.DelaySeconds > conf.CFG_PQ.MaxDeliveryDelay {
return sqserr.InvalidParameterValueError(
"Delay secods must be between 0 and %d", conf.CFG_PQ.MaxDeliveryDelay/1000)
}
bodyMd5str := fmt.Sprintf("%x", md5.Sum(enc.UnsafeStringToBytes(out.MessageBody)))
attrMd5 := CalcAttrMd5(outAttrs)
msgPayload := sqsmsg.SQSMessagePayload{
UserAttributes: outAttrs,
MD5OfMessageBody: bodyMd5str,
MD5OfMessageAttributes: attrMd5,
SenderId: senderId,
SentTimestamp: strconv.FormatInt(utils.Uts(), 10),
Payload: out.MessageBody,
}
d, marshalErr := msgPayload.Marshal()
if marshalErr != nil {
log.Error("Failed to serialize message payload: %v", err)
}
payload := enc.UnsafeBytesToString(d)
resp := pq.Push(msgId, payload, pq.Config().MsgTtl, out.DelaySeconds, 1)
if resp.IsError() {
e, _ := resp.(error)
return sqserr.InvalidParameterValueError(e.Error())
}
return &SendMessageResponse{
MessageId: msgId,
MD5OfMessageBody: bodyMd5str,
MD5OfMessageAttributes: attrMd5,
RequestId: "req",
}
}
