Example #1
0
func setInterfaceIPv6(nlh *netlink.Handle, iface netlink.Link, i *nwIface) error {
	if i.AddressIPv6() == nil {
		return nil
	}
	ipAddr := &netlink.Addr{IPNet: i.AddressIPv6(), Label: "", Flags: syscall.IFA_F_NODAD}
	return nlh.AddrAdd(iface, ipAddr)
}
Example #2
0
func setHairpinMode(nlh *netlink.Handle, link netlink.Link, enable bool) error {
	err := nlh.LinkSetHairpin(link, enable)
	if err != nil && err != syscall.EINVAL {
		// If error is not EINVAL something else went wrong, bail out right away
		return fmt.Errorf("unable to set hairpin mode on %s via netlink: %v",
			link.Attrs().Name, err)
	}

	// Hairpin mode successfully set up
	if err == nil {
		return nil
	}

	// The netlink method failed with EINVAL which is probably because of an older
	// kernel. Try one more time via the sysfs method.
	path := filepath.Join("/sys/class/net", link.Attrs().Name, "brport/hairpin_mode")

	var val []byte
	if enable {
		val = []byte{'1', '\n'}
	} else {
		val = []byte{'0', '\n'}
	}

	if err := ioutil.WriteFile(path, val, 0644); err != nil {
		return fmt.Errorf("unable to set hairpin mode on %s via sysfs: %v", link.Attrs().Name, err)
	}

	return nil
}
Example #3
0
func setInterfaceMaster(nlh *netlink.Handle, iface netlink.Link, i *nwIface) error {
	if i.DstMaster() == "" {
		return nil
	}

	return nlh.LinkSetMaster(iface, &netlink.Bridge{
		LinkAttrs: netlink.LinkAttrs{Name: i.DstMaster()}})
}
Example #4
0
func setInterfaceIP(nlh *netlink.Handle, iface netlink.Link, i *nwIface) error {
	if i.Address() == nil {
		return nil
	}

	ipAddr := &netlink.Addr{IPNet: i.Address(), Label: ""}
	return nlh.AddrAdd(iface, ipAddr)
}
Example #5
0
func setInterfaceLinkLocalIPs(nlh *netlink.Handle, iface netlink.Link, i *nwIface) error {
	for _, llIP := range i.LinkLocalAddresses() {
		ipAddr := &netlink.Addr{IPNet: llIP}
		if err := nlh.AddrAdd(iface, ipAddr); err != nil {
			return err
		}
	}
	return nil
}
Example #6
0
func setInterfaceIPAliases(nlh *netlink.Handle, iface netlink.Link, i *nwIface) error {
	for _, si := range i.IPAliases() {
		ipAddr := &netlink.Addr{IPNet: si}
		if err := nlh.AddrAdd(iface, ipAddr); err != nil {
			return err
		}
	}
	return nil
}
Example #7
0
func setInterfaceIP(nlh *netlink.Handle, iface netlink.Link, i *nwIface) error {
	if i.Address() == nil {
		return nil
	}
	if err := checkRouteConflict(nlh, i.Address(), netlink.FAMILY_V4); err != nil {
		return err
	}
	ipAddr := &netlink.Addr{IPNet: i.Address(), Label: ""}
	return nlh.AddrAdd(iface, ipAddr)
}
Example #8
0
func setInterfaceIPv6(nlh *netlink.Handle, iface netlink.Link, i *nwIface) error {
	if i.AddressIPv6() == nil {
		return nil
	}
	if err := checkRouteConflict(nlh, i.AddressIPv6(), netlink.FAMILY_V6); err != nil {
		return err
	}
	ipAddr := &netlink.Addr{IPNet: i.AddressIPv6(), Label: "", Flags: syscall.IFA_F_NODAD}
	return nlh.AddrAdd(iface, ipAddr)
}
Example #9
0
func setInterfaceRoutes(nlh *netlink.Handle, iface netlink.Link, i *nwIface) error {
	for _, route := range i.Routes() {
		err := nlh.RouteAdd(&netlink.Route{
			Scope:     netlink.SCOPE_LINK,
			LinkIndex: iface.Attrs().Index,
			Dst:       route,
		})
		if err != nil {
			return err
		}
	}
	return nil
}
Example #10
0
func setInterfaceIPv6(nlh *netlink.Handle, iface netlink.Link, i *nwIface) error {
	if i.AddressIPv6() == nil {
		return nil
	}
	if err := checkRouteConflict(nlh, i.AddressIPv6(), netlink.FAMILY_V6); err != nil {
		return err
	}
	if err := setIPv6(i.ns.path, i.DstName(), true); err != nil {
		return fmt.Errorf("failed to enable ipv6: %v", err)
	}
	ipAddr := &netlink.Addr{IPNet: i.AddressIPv6(), Label: "", Flags: syscall.IFA_F_NODAD}
	return nlh.AddrAdd(iface, ipAddr)
}
Example #11
0
func checkRouteConflict(nlh *netlink.Handle, address *net.IPNet, family int) error {
	routes, err := nlh.RouteList(nil, family)
	if err != nil {
		return err
	}
	for _, route := range routes {
		if route.Dst != nil {
			if route.Dst.Contains(address.IP) || address.Contains(route.Dst.IP) {
				return fmt.Errorf("cannot program address %v in sandbox interface because it conflicts with existing route %s",
					address, route)
			}
		}
	}
	return nil
}
Example #12
0
// newInterface creates a new bridge interface structure. It attempts to find
// an already existing device identified by the configuration BridgeName field,
// or the default bridge name when unspecified, but doesn't attempt to create
// one when missing
func newInterface(nlh *netlink.Handle, config *networkConfiguration) *bridgeInterface {
	var err error
	i := &bridgeInterface{nlh: nlh}

	// Initialize the bridge name to the default if unspecified.
	if config.BridgeName == "" {
		config.BridgeName = DefaultBridgeName
	}

	// Attempt to find an existing bridge named with the specified name.
	i.Link, err = nlh.LinkByName(config.BridgeName)
	if err != nil {
		logrus.Debugf("Did not find any interface with name %s: %v", config.BridgeName, err)
	}
	return i
}
Example #13
0
// newInterface creates a new bridge interface structure. It attempts to find
// an already existing device identified by the configuration BridgeName field,
// or the default bridge name when unspecified, but doesn't attempt to create
// one when missing
func newInterface(nlh *netlink.Handle, config *networkConfiguration) (*bridgeInterface, error) {
	var err error
	i := &bridgeInterface{nlh: nlh}

	// Initialize the bridge name to the default if unspecified.
	if config.BridgeName == "" {
		config.BridgeName = DefaultBridgeName
	}

	// Attempt to find an existing bridge named with the specified name.
	i.Link, err = nlh.LinkByName(config.BridgeName)
	if err != nil {
		logrus.Debugf("Did not find any interface with name %s: %v", config.BridgeName, err)
	} else if _, ok := i.Link.(*netlink.Bridge); !ok {
		return nil, fmt.Errorf("existing interface %s is not a bridge", i.Link.Attrs().Name)
	}
	return i, nil
}
Example #14
0
func addToBridge(nlh *netlink.Handle, ifaceName, bridgeName string) error {
	link, err := nlh.LinkByName(ifaceName)
	if err != nil {
		return fmt.Errorf("could not find interface %s: %v", ifaceName, err)
	}
	if err = nlh.LinkSetMaster(link,
		&netlink.Bridge{LinkAttrs: netlink.LinkAttrs{Name: bridgeName}}); err != nil {
		logrus.Debugf("Failed to add %s to bridge via netlink.Trying ioctl: %v", ifaceName, err)
		iface, err := net.InterfaceByName(ifaceName)
		if err != nil {
			return fmt.Errorf("could not find network interface %s: %v", ifaceName, err)
		}

		master, err := net.InterfaceByName(bridgeName)
		if err != nil {
			return fmt.Errorf("could not find bridge %s: %v", bridgeName, err)
		}

		return ioctlAddToBridge(iface, master)
	}
	return nil
}
func newInfo(hnd *netlink.Handle, t *testing.T) (Sandbox, error) {
	veth := &netlink.Veth{
		LinkAttrs: netlink.LinkAttrs{Name: vethName1, TxQLen: 0},
		PeerName:  vethName2}
	if err := hnd.LinkAdd(veth); err != nil {
		return nil, err
	}

	// Store the sandbox side pipe interface
	// This is needed for cleanup on DeleteEndpoint()
	intf1 := &nwIface{}
	intf1.srcName = vethName2
	intf1.dstName = sboxIfaceName

	ip4, addr, err := net.ParseCIDR("192.168.1.100/24")
	if err != nil {
		return nil, err
	}
	intf1.address = addr
	intf1.address.IP = ip4

	ip6, addrv6, err := net.ParseCIDR("2001:DB8::ABCD/48")
	if err != nil {
		return nil, err
	}
	intf1.addressIPv6 = addrv6
	intf1.addressIPv6.IP = ip6

	_, route, err := net.ParseCIDR("192.168.2.1/32")
	if err != nil {
		return nil, err
	}

	intf1.routes = []*net.IPNet{route}

	intf2 := &nwIface{}
	intf2.srcName = "testbridge"
	intf2.dstName = sboxIfaceName
	intf2.bridge = true

	veth = &netlink.Veth{
		LinkAttrs: netlink.LinkAttrs{Name: vethName3, TxQLen: 0},
		PeerName:  vethName4}

	if err := hnd.LinkAdd(veth); err != nil {
		return nil, err
	}

	intf3 := &nwIface{}
	intf3.srcName = vethName4
	intf3.dstName = sboxIfaceName
	intf3.master = "testbridge"

	info := &networkNamespace{iFaces: []*nwIface{intf1, intf2, intf3}}

	info.gw = net.ParseIP("192.168.1.1")
	// sinfo.GatewayIPv6 = net.ParseIP("2001:DB8::1")
	info.gwv6 = net.ParseIP("fe80::1")

	return info, nil
}
Example #16
0
func setInterfaceName(nlh *netlink.Handle, iface netlink.Link, i *nwIface) error {
	return nlh.LinkSetName(iface, i.DstName())
}
Example #17
0
func setInterfaceMAC(nlh *netlink.Handle, iface netlink.Link, i *nwIface) error {
	if i.MacAddress() == nil {
		return nil
	}
	return nlh.LinkSetHardwareAddr(iface, i.MacAddress())
}