Example #1
0
// prepare is the internal version of Prepare - it prepares the
// environment but does not open it.
func (p *environProvider) prepare(cfg *config.Config) (*config.Config, error) {
	ecfg, err := p.newConfig(cfg)
	if err != nil {
		return nil, err
	}
	p.mu.Lock()
	defer p.mu.Unlock()
	name := cfg.Name()
	if ecfg.stateId() != noStateId {
		return cfg, nil
	}
	// The environment has not been prepared,
	// so create it and set its state identifier accordingly.
	if ecfg.stateServer() && len(p.state) != 0 {
		for _, old := range p.state {
			panic(fmt.Errorf("cannot share a state between two dummy environs; old %q; new %q", old.name, name))
		}
	}
	state := newState(name, p.ops, p.statePolicy)
	p.maxStateId++
	state.id = p.maxStateId
	p.state[state.id] = state
	// Add the state id to the configuration we use to
	// in the returned environment.
	return cfg.Apply(map[string]interface{}{
		"state-id": fmt.Sprint(state.id),
	})
}
Example #2
0
func (maasEnvironProvider) Open(cfg *config.Config) (environs.Environ, error) {
	logger.Debugf("opening environment %q.", cfg.Name())
	env, err := NewEnviron(cfg)
	if err != nil {
		return nil, err
	}
	return env, nil
}
Example #3
0
// Open is specified in the EnvironProvider interface.
func (prov azureEnvironProvider) Open(cfg *config.Config) (environs.Environ, error) {
	logger.Debugf("opening environment %q.", cfg.Name())
	// We can't return NewEnviron(cfg) directly here because otherwise,
	// when err is not nil, we end up with a non-nil returned environ and
	// this breaks the loop in cmd/jujud/upgrade.go:run() (see
	// http://golang.org/doc/faq#nil_error for the gory details).
	environ, err := NewEnviron(cfg)
	if err != nil {
		return nil, err
	}
	return environ, nil
}
Example #4
0
// Initialize sets up an initial empty state and returns it.
// This needs to be performed only once for a given environment.
// It returns unauthorizedError if access is unauthorized.
func Initialize(info *Info, cfg *config.Config, opts DialOpts, policy Policy) (rst *State, err error) {
	st, err := Open(info, opts, policy)
	if err != nil {
		return nil, err
	}
	defer func() {
		if err != nil {
			st.Close()
		}
	}()
	// A valid environment is used as a signal that the
	// state has already been initalized. If this is the case
	// do nothing.
	if _, err := st.Environment(); err == nil {
		return st, nil
	} else if !errors.IsNotFound(err) {
		return nil, err
	}
	logger.Infof("initializing environment")
	if err := checkEnvironConfig(cfg); err != nil {
		return nil, err
	}
	uuid, err := utils.NewUUID()
	if err != nil {
		return nil, fmt.Errorf("environment UUID cannot be created: %v", err)
	}
	ops := []txn.Op{
		createConstraintsOp(st, environGlobalKey, constraints.Value{}),
		createSettingsOp(st, environGlobalKey, cfg.AllAttrs()),
		createEnvironmentOp(st, cfg.Name(), uuid.String()),
		{
			C:      st.stateServers.Name,
			Id:     environGlobalKey,
			Insert: &stateServersDoc{},
		}, {
			C:      st.stateServers.Name,
			Id:     apiHostPortsKey,
			Insert: &apiHostPortsDoc{},
		},
	}
	if err := st.runTransaction(ops); err == txn.ErrAborted {
		// The config was created in the meantime.
		return st, nil
	} else if err != nil {
		return nil, err
	}
	return st, nil
}
Example #5
0
// newEnviron create a new Joyent environ instance from config.
func newEnviron(cfg *config.Config) (*joyentEnviron, error) {
	env := new(joyentEnviron)
	if err := env.SetConfig(cfg); err != nil {
		return nil, err
	}
	env.name = cfg.Name()
	var err error
	env.storage, err = newStorage(env.ecfg, "")
	if err != nil {
		return nil, err
	}
	env.compute, err = newCompute(env.ecfg)
	if err != nil {
		return nil, err
	}
	return env, nil
}
Example #6
0
// ensureCertificate generates a new CA certificate and
// attaches it to the given environment configuration,
// unless the configuration already has one.
func ensureCertificate(cfg *config.Config) (*config.Config, error) {
	_, hasCACert := cfg.CACert()
	_, hasCAKey := cfg.CAPrivateKey()
	if hasCACert && hasCAKey {
		return cfg, nil
	}
	if hasCACert && !hasCAKey {
		return nil, fmt.Errorf("environment configuration with a certificate but no CA private key")
	}

	caCert, caKey, err := cert.NewCA(cfg.Name(), time.Now().UTC().AddDate(10, 0, 0))
	if err != nil {
		return nil, err
	}
	return cfg.Apply(map[string]interface{}{
		"ca-cert":        string(caCert),
		"ca-private-key": string(caKey),
	})
}
Example #7
0
// Prepare prepares a new environment based on the provided configuration.
// If the environment is already prepared, it behaves like New.
func Prepare(cfg *config.Config, ctx BootstrapContext, store configstore.Storage) (Environ, error) {
	p, err := Provider(cfg.Type())
	if err != nil {
		return nil, err
	}
	info, err := store.CreateInfo(cfg.Name())
	if err == configstore.ErrEnvironInfoAlreadyExists {
		logger.Infof("environment info already exists; using New not Prepare")
		info, err := store.ReadInfo(cfg.Name())
		if err != nil {
			return nil, fmt.Errorf("error reading environment info %q: %v", cfg.Name(), err)
		}
		if !info.Initialized() {
			return nil, fmt.Errorf("found uninitialized environment info for %q; environment preparation probably in progress or interrupted", cfg.Name())
		}
		if len(info.BootstrapConfig()) == 0 {
			return nil, fmt.Errorf("found environment info but no bootstrap config")
		}
		cfg, err = config.New(config.NoDefaults, info.BootstrapConfig())
		if err != nil {
			return nil, fmt.Errorf("cannot parse bootstrap config: %v", err)
		}
		return New(cfg)
	}
	if err != nil {
		return nil, fmt.Errorf("cannot create new info for environment %q: %v", cfg.Name(), err)
	}
	env, err := prepare(ctx, cfg, info, p)
	if err != nil {
		if err := info.Destroy(); err != nil {
			logger.Warningf("cannot destroy newly created environment info: %v", err)
		}
		return nil, err
	}
	info.SetBootstrapConfig(env.Config().AllAttrs())
	if err := info.Write(); err != nil {
		return nil, fmt.Errorf("cannot create environment info %q: %v", env.Config().Name(), err)
	}
	return env, nil
}
Example #8
0
// Open implements environs.EnvironProvider.Open.
func (environProvider) Open(cfg *config.Config) (environs.Environ, error) {
	logger.Infof("opening environment %q", cfg.Name())
	if _, ok := cfg.AgentVersion(); !ok {
		newCfg, err := cfg.Apply(map[string]interface{}{
			"agent-version": version.Current.Number.String(),
		})
		if err != nil {
			return nil, err
		}
		cfg = newCfg
	}
	// Set the "namespace" attribute. We do this here, and not in Prepare,
	// for backwards compatibility: older versions did not store the namespace
	// in config.
	if namespace, _ := cfg.UnknownAttrs()["namespace"].(string); namespace == "" {
		username := os.Getenv("USER")
		if username == "" {
			u, err := userCurrent()
			if err != nil {
				return nil, fmt.Errorf("failed to determine username for namespace: %v", err)
			}
			username = u.Username
		}
		var err error
		namespace = fmt.Sprintf("%s-%s", username, cfg.Name())
		cfg, err = cfg.Apply(map[string]interface{}{"namespace": namespace})
		if err != nil {
			return nil, fmt.Errorf("failed to create namespace: %v", err)
		}
	}
	// Do the initial validation on the config.
	localConfig, err := providerInstance.newConfig(cfg)
	if err != nil {
		return nil, err
	}
	if err := VerifyPrerequisites(localConfig.container()); err != nil {
		return nil, fmt.Errorf("failed verification of local provider prerequisites: %v", err)
	}
	environ := &localEnviron{name: cfg.Name()}
	if err := environ.SetConfig(cfg); err != nil {
		return nil, fmt.Errorf("failure setting config: %v", err)
	}
	return environ, nil
}
Example #9
0
// Validate implements environs.EnvironProvider.Validate.
func (provider environProvider) Validate(cfg, old *config.Config) (valid *config.Config, err error) {
	// Check for valid changes for the base config values.
	if err := config.Validate(cfg, old); err != nil {
		return nil, err
	}
	validated, err := cfg.ValidateUnknownAttrs(configFields, configDefaults)
	if err != nil {
		return nil, fmt.Errorf("failed to validate unknown attrs: %v", err)
	}
	localConfig := newEnvironConfig(cfg, validated)
	// Before potentially creating directories, make sure that the
	// root directory has not changed.
	containerType := localConfig.container()
	if old != nil {
		oldLocalConfig, err := provider.newConfig(old)
		if err != nil {
			return nil, fmt.Errorf("old config is not a valid local config: %v", old)
		}
		if containerType != oldLocalConfig.container() {
			return nil, fmt.Errorf("cannot change container from %q to %q",
				oldLocalConfig.container(), containerType)
		}
		if localConfig.rootDir() != oldLocalConfig.rootDir() {
			return nil, fmt.Errorf("cannot change root-dir from %q to %q",
				oldLocalConfig.rootDir(),
				localConfig.rootDir())
		}
		if localConfig.networkBridge() != oldLocalConfig.networkBridge() {
			return nil, fmt.Errorf("cannot change network-bridge from %q to %q",
				oldLocalConfig.rootDir(),
				localConfig.rootDir())
		}
		if localConfig.storagePort() != oldLocalConfig.storagePort() {
			return nil, fmt.Errorf("cannot change storage-port from %v to %v",
				oldLocalConfig.storagePort(),
				localConfig.storagePort())
		}
	}
	// Currently only supported containers are "lxc" and "kvm".
	if containerType != instance.LXC && containerType != instance.KVM {
		return nil, fmt.Errorf("unsupported container type: %q", containerType)
	}
	dir, err := utils.NormalizePath(localConfig.rootDir())
	if err != nil {
		return nil, err
	}
	if dir == "." {
		dir = osenv.JujuHomePath(cfg.Name())
	}
	// Always assign the normalized path.
	localConfig.attrs["root-dir"] = dir

	if containerType != instance.KVM {
		fastOptionAvailable := useFastLXC(containerType)
		if _, found := localConfig.attrs["lxc-clone"]; !found {
			localConfig.attrs["lxc-clone"] = fastOptionAvailable
		}
	}

	// Apply the coerced unknown values back into the config.
	return cfg.Apply(localConfig.attrs)
}