Example #1
0
File: ggen.go Project: rsc/tmp
/*
 * generate byte multiply:
 *	res = nl * nr
 * there is no 2-operand byte multiply instruction so
 * we do a full-width multiplication and truncate afterwards.
 */
func cgen_bmul(op int, nl *gc.Node, nr *gc.Node, res *gc.Node) bool {
	if optoas(op, nl.Type) != x86.AIMULB {
		return false
	}

	// largest ullman on left.
	if nl.Ullman < nr.Ullman {
		tmp := nl
		nl = nr
		nr = tmp
	}

	// generate operands in "8-bit" registers.
	var n1b gc.Node
	gc.Regalloc(&n1b, nl.Type, res)

	gc.Cgen(nl, &n1b)
	var n2b gc.Node
	gc.Regalloc(&n2b, nr.Type, nil)
	gc.Cgen(nr, &n2b)

	// perform full-width multiplication.
	t := gc.Types[gc.TUINT64]

	if gc.Issigned[nl.Type.Etype] {
		t = gc.Types[gc.TINT64]
	}
	var n1 gc.Node
	gc.Nodreg(&n1, t, int(n1b.Reg))
	var n2 gc.Node
	gc.Nodreg(&n2, t, int(n2b.Reg))
	a := optoas(op, t)
	gins(a, &n2, &n1)

	// truncate.
	gmove(&n1, res)

	gc.Regfree(&n1b)
	gc.Regfree(&n2b)
	return true
}
Example #2
0
File: ggen.go Project: rsc/tmp
/*
 * generate division.
 * generates one of:
 *	res = nl / nr
 *	res = nl % nr
 * according to op.
 */
func dodiv(op int, nl *gc.Node, nr *gc.Node, res *gc.Node) {
	// Have to be careful about handling
	// most negative int divided by -1 correctly.
	// The hardware will trap.
	// Also the byte divide instruction needs AH,
	// which we otherwise don't have to deal with.
	// Easiest way to avoid for int8, int16: use int32.
	// For int32 and int64, use explicit test.
	// Could use int64 hw for int32.
	t := nl.Type

	t0 := t
	check := 0
	if gc.Issigned[t.Etype] {
		check = 1
		if gc.Isconst(nl, gc.CTINT) && gc.Mpgetfix(nl.Val.U.Xval) != -(1<<uint64(t.Width*8-1)) {
			check = 0
		} else if gc.Isconst(nr, gc.CTINT) && gc.Mpgetfix(nr.Val.U.Xval) != -1 {
			check = 0
		}
	}

	if t.Width < 4 {
		if gc.Issigned[t.Etype] {
			t = gc.Types[gc.TINT32]
		} else {
			t = gc.Types[gc.TUINT32]
		}
		check = 0
	}

	a := optoas(op, t)

	var n3 gc.Node
	gc.Regalloc(&n3, t0, nil)
	var ax gc.Node
	var oldax gc.Node
	if nl.Ullman >= nr.Ullman {
		savex(x86.REG_AX, &ax, &oldax, res, t0)
		gc.Cgen(nl, &ax)
		gc.Regalloc(&ax, t0, &ax) // mark ax live during cgen
		gc.Cgen(nr, &n3)
		gc.Regfree(&ax)
	} else {
		gc.Cgen(nr, &n3)
		savex(x86.REG_AX, &ax, &oldax, res, t0)
		gc.Cgen(nl, &ax)
	}

	if t != t0 {
		// Convert
		ax1 := ax

		n31 := n3
		ax.Type = t
		n3.Type = t
		gmove(&ax1, &ax)
		gmove(&n31, &n3)
	}

	var n4 gc.Node
	if gc.Nacl {
		// Native Client does not relay the divide-by-zero trap
		// to the executing program, so we must insert a check
		// for ourselves.
		gc.Nodconst(&n4, t, 0)

		gins(optoas(gc.OCMP, t), &n3, &n4)
		p1 := gc.Gbranch(optoas(gc.ONE, t), nil, +1)
		if panicdiv == nil {
			panicdiv = gc.Sysfunc("panicdivide")
		}
		gc.Ginscall(panicdiv, -1)
		gc.Patch(p1, gc.Pc)
	}

	var p2 *obj.Prog
	if check != 0 {
		gc.Nodconst(&n4, t, -1)
		gins(optoas(gc.OCMP, t), &n3, &n4)
		p1 := gc.Gbranch(optoas(gc.ONE, t), nil, +1)
		if op == gc.ODIV {
			// a / (-1) is -a.
			gins(optoas(gc.OMINUS, t), nil, &ax)

			gmove(&ax, res)
		} else {
			// a % (-1) is 0.
			gc.Nodconst(&n4, t, 0)

			gmove(&n4, res)
		}

		p2 = gc.Gbranch(obj.AJMP, nil, 0)
		gc.Patch(p1, gc.Pc)
	}

	var olddx gc.Node
	var dx gc.Node
	savex(x86.REG_DX, &dx, &olddx, res, t)
	if !gc.Issigned[t.Etype] {
		gc.Nodconst(&n4, t, 0)
		gmove(&n4, &dx)
	} else {
		gins(optoas(gc.OEXTEND, t), nil, nil)
	}
	gins(a, &n3, nil)
	gc.Regfree(&n3)
	if op == gc.ODIV {
		gmove(&ax, res)
	} else {
		gmove(&dx, res)
	}
	restx(&dx, &olddx)
	if check != 0 {
		gc.Patch(p2, gc.Pc)
	}
	restx(&ax, &oldax)
}
Example #3
0
File: ggen.go Project: rsc/tmp
/*
 * generate shift according to op, one of:
 *	res = nl << nr
 *	res = nl >> nr
 */
func cgen_shift(op int, bounded bool, nl *gc.Node, nr *gc.Node, res *gc.Node) {
	a := optoas(op, nl.Type)

	if nr.Op == gc.OLITERAL {
		var n1 gc.Node
		gc.Regalloc(&n1, nl.Type, res)
		gc.Cgen(nl, &n1)
		sc := uint64(gc.Mpgetfix(nr.Val.U.Xval))
		if sc >= uint64(nl.Type.Width*8) {
			// large shift gets 2 shifts by width-1
			var n3 gc.Node
			gc.Nodconst(&n3, gc.Types[gc.TUINT32], nl.Type.Width*8-1)

			gins(a, &n3, &n1)
			gins(a, &n3, &n1)
		} else {
			gins(a, nr, &n1)
		}
		gmove(&n1, res)
		gc.Regfree(&n1)
		return
	}

	if nl.Ullman >= gc.UINF {
		var n4 gc.Node
		gc.Tempname(&n4, nl.Type)
		gc.Cgen(nl, &n4)
		nl = &n4
	}

	if nr.Ullman >= gc.UINF {
		var n5 gc.Node
		gc.Tempname(&n5, nr.Type)
		gc.Cgen(nr, &n5)
		nr = &n5
	}

	rcx := int(reg[x86.REG_CX])
	var n1 gc.Node
	gc.Nodreg(&n1, gc.Types[gc.TUINT32], x86.REG_CX)

	// Allow either uint32 or uint64 as shift type,
	// to avoid unnecessary conversion from uint32 to uint64
	// just to do the comparison.
	tcount := gc.Types[gc.Simtype[nr.Type.Etype]]

	if tcount.Etype < gc.TUINT32 {
		tcount = gc.Types[gc.TUINT32]
	}

	gc.Regalloc(&n1, nr.Type, &n1) // to hold the shift type in CX
	var n3 gc.Node
	gc.Regalloc(&n3, tcount, &n1) // to clear high bits of CX

	var cx gc.Node
	gc.Nodreg(&cx, gc.Types[gc.TUINT64], x86.REG_CX)

	var oldcx gc.Node
	if rcx > 0 && !gc.Samereg(&cx, res) {
		gc.Regalloc(&oldcx, gc.Types[gc.TUINT64], nil)
		gmove(&cx, &oldcx)
	}

	cx.Type = tcount

	var n2 gc.Node
	if gc.Samereg(&cx, res) {
		gc.Regalloc(&n2, nl.Type, nil)
	} else {
		gc.Regalloc(&n2, nl.Type, res)
	}
	if nl.Ullman >= nr.Ullman {
		gc.Cgen(nl, &n2)
		gc.Cgen(nr, &n1)
		gmove(&n1, &n3)
	} else {
		gc.Cgen(nr, &n1)
		gmove(&n1, &n3)
		gc.Cgen(nl, &n2)
	}

	gc.Regfree(&n3)

	// test and fix up large shifts
	if !bounded {
		gc.Nodconst(&n3, tcount, nl.Type.Width*8)
		gins(optoas(gc.OCMP, tcount), &n1, &n3)
		p1 := gc.Gbranch(optoas(gc.OLT, tcount), nil, +1)
		if op == gc.ORSH && gc.Issigned[nl.Type.Etype] {
			gc.Nodconst(&n3, gc.Types[gc.TUINT32], nl.Type.Width*8-1)
			gins(a, &n3, &n2)
		} else {
			gc.Nodconst(&n3, nl.Type, 0)
			gmove(&n3, &n2)
		}

		gc.Patch(p1, gc.Pc)
	}

	gins(a, &n1, &n2)

	if oldcx.Op != 0 {
		cx.Type = gc.Types[gc.TUINT64]
		gmove(&oldcx, &cx)
		gc.Regfree(&oldcx)
	}

	gmove(&n2, res)

	gc.Regfree(&n1)
	gc.Regfree(&n2)
}
Example #4
0
File: gsubr.go Project: rsc/tmp
/*
 * generate code to compute address of n,
 * a reference to a (perhaps nested) field inside
 * an array or struct.
 * return 0 on failure, 1 on success.
 * on success, leaves usable address in a.
 *
 * caller is responsible for calling sudoclean
 * after successful sudoaddable,
 * to release the register used for a.
 */
func sudoaddable(as int, n *gc.Node, a *obj.Addr) bool {
	if n.Type == nil {
		return false
	}

	*a = obj.Addr{}

	switch n.Op {
	case gc.OLITERAL:
		if !gc.Isconst(n, gc.CTINT) {
			break
		}
		v := gc.Mpgetfix(n.Val.U.Xval)
		if v >= 32000 || v <= -32000 {
			break
		}
		switch as {
		default:
			return false

		case x86.AADDB,
			x86.AADDW,
			x86.AADDL,
			x86.AADDQ,
			x86.ASUBB,
			x86.ASUBW,
			x86.ASUBL,
			x86.ASUBQ,
			x86.AANDB,
			x86.AANDW,
			x86.AANDL,
			x86.AANDQ,
			x86.AORB,
			x86.AORW,
			x86.AORL,
			x86.AORQ,
			x86.AXORB,
			x86.AXORW,
			x86.AXORL,
			x86.AXORQ,
			x86.AINCB,
			x86.AINCW,
			x86.AINCL,
			x86.AINCQ,
			x86.ADECB,
			x86.ADECW,
			x86.ADECL,
			x86.ADECQ,
			x86.AMOVB,
			x86.AMOVW,
			x86.AMOVL,
			x86.AMOVQ:
			break
		}

		cleani += 2
		reg := &clean[cleani-1]
		reg1 := &clean[cleani-2]
		reg.Op = gc.OEMPTY
		reg1.Op = gc.OEMPTY
		gc.Naddr(a, n)
		return true

	case gc.ODOT,
		gc.ODOTPTR:
		cleani += 2
		reg := &clean[cleani-1]
		reg1 := &clean[cleani-2]
		reg.Op = gc.OEMPTY
		reg1.Op = gc.OEMPTY
		var nn *gc.Node
		var oary [10]int64
		o := gc.Dotoffset(n, oary[:], &nn)
		if nn == nil {
			sudoclean()
			return false
		}

		if nn.Addable && o == 1 && oary[0] >= 0 {
			// directly addressable set of DOTs
			n1 := *nn

			n1.Type = n.Type
			n1.Xoffset += oary[0]
			gc.Naddr(a, &n1)
			return true
		}

		gc.Regalloc(reg, gc.Types[gc.Tptr], nil)
		n1 := *reg
		n1.Op = gc.OINDREG
		if oary[0] >= 0 {
			gc.Agen(nn, reg)
			n1.Xoffset = oary[0]
		} else {
			gc.Cgen(nn, reg)
			gc.Cgen_checknil(reg)
			n1.Xoffset = -(oary[0] + 1)
		}

		for i := 1; i < o; i++ {
			if oary[i] >= 0 {
				gc.Fatal("can't happen")
			}
			gins(movptr, &n1, reg)
			gc.Cgen_checknil(reg)
			n1.Xoffset = -(oary[i] + 1)
		}

		a.Type = obj.TYPE_NONE
		a.Index = obj.TYPE_NONE
		gc.Fixlargeoffset(&n1)
		gc.Naddr(a, &n1)
		return true

	case gc.OINDEX:
		return false
	}

	return false
}