Exemple #1
1
Fichier : dt.go Projet : adg/dt
// lineDiff returns b with all lines added or changed from a highlighted.
// It discards spaces within lines when comparing lines, so subtle
// gofmt-induced alignment changes are not flagged as changes.
// It also handles single-line diffs specially, highlighting only the
// changes within those lines.
func lineDiff(a, b []byte) []byte {
	l := byteLines{bytes.Split(a, []byte("\n")), bytes.Split(b, []byte("\n"))}
	cs := diff.Diff(len(l.a), len(l.b), diff.Data(l))

	var buf bytes.Buffer
	n := 0
	for _, c := range cs {
		for _, b := range l.b[n:c.B] {
			buf.Write(b)
			buf.WriteByte('\n')
		}
		if c.Ins > 0 {
			if c.Ins == 1 && c.Del == 1 {
				buf.Write(byteDiff(l.a[c.A], l.b[c.B]))
				buf.WriteByte('\n')
			} else {
				for _, b := range l.b[c.B : c.B+c.Ins] {
					buf.Write(colorize(b))
					buf.WriteByte('\n')
				}
			}
		}
		n = c.B + c.Ins
	}
	for i, b := range l.b[n:] {
		if i > 0 {
			buf.WriteByte('\n')
		}
		buf.Write(b)
	}
	return buf.Bytes()
}
Exemple #2
1
func runDatCase(c []byte) int {
	var counter int
	defer func() {
		if e := recover(); e != nil {
			fmt.Println("ERROR while running test case:", e)
			counter++
		}
	}()
	parts := bytes.Split(c, []byte("#"))
	if len(parts) != 4 {
		counter++
	}
	if len(parts) != 4 && *verbose {
		fmt.Printf("Malformed test case: %d, %q\n", len(parts), string(c))
		return counter
	}
	fmt.Println("Running test case:", string(c))
	testData := make(map[string]string)
	for _, p := range parts[1:] {
		t := bytes.Split(p, []byte("\n"))
		testData[string(t[0])] = string(t[1])
	}
	p := h5.NewParserFromString(string(testData["data"]))
	err := p.Parse()
	if err != nil {
		fmt.Println("Test case:", string(c))
		fmt.Println("ERROR parsing: ", err)
		counter++
	} else {
		if *verbose {
			fmt.Println("SUCCESS!!!")
		}
	}
	return counter
}
Exemple #3
1
func LoadMap() error {
	contents, err := ioutil.ReadFile(fileMapPath)
	if err != nil {
		return fmt.Errorf("Could not read file %s: %s", fileMapPath, err.Error())
	}
	lines := bytes.Split(contents, []byte("\n"))

	newMap := make(map[string]string)
	for i, line := range lines {
		lineParts := bytes.Split(bytes.TrimSpace(line), []byte(" "))
		if len(lineParts[0]) == 0 {
			continue
		}

		user := string(lineParts[:1][0])
		host := string(lineParts[len(lineParts)-1:][0])

		if _, alreadyExists := newMap[user]; alreadyExists {
			return fmt.Errorf("User %s was defined more than once on line %d", user, i)
		}

		newMap[user] = host
	}

	if len(newMap) < minEntries {
		return fmt.Errorf("New Map only contains %d entries, which is less than the set minimum %d",
			len(newMap), minEntries)
	}

	fileMapLock.Lock()
	defer fileMapLock.Unlock()
	fileMap = newMap

	return nil
}
Exemple #4
1
func (fl *FriendsList) Parse(buf []byte) (f map[string]string, err error) {
	f = make(map[string]string)
	for _, l := range bytes.Split(buf, []byte("\n")) {
		if len(l) < 3 {
			continue
		}

		parts := bytes.Split(l, []byte(" "))
		if len(parts) != 2 {
			return f, fmt.Errorf("format error. too many parts. %s", parts)
		}

		user := string(parts[0])
		if len(user) < 1 {
			return f, fmt.Errorf("invalid user: %s", user)
		}

		perm := string(parts[1])
		if !validPerm(perm) {
			return f, fmt.Errorf("invalid perm: %s", perm)
		}
		f[user] = perm
	}

	// ok everything seems good
	return f, nil
}
Exemple #5
1
func loadPerms(path string) (mperms PermissionsList) {
	file, e := ioutil.ReadFile(path)
	if e != nil {
		fmt.Println("Could not get group permissions for", path, ":", e)
		return
	}
	lines := bytes.Split(file, []byte("\n"), -1)
	mperms = make(PermissionsList, len(lines))
	for i, line := range lines {
		parts := bytes.Split(line, []byte(" "), 2)
		perms := mperms[i]
		for _, perm := range parts[0] {
			switch perm {
			case 'r':
				perms.Read = true
			case 'w':
				perms.Write = true
			default:
				fmt.Println("WARNING: Unrecognized permission", perm)
			}
			perms.Path = string(parts[1])
			mperms[i] = perms
		}
	}
	sort.Sort(mperms)
	if !sort.IsSorted(mperms) {
		fmt.Println("Failed to sort!")
	}
	return
}
func parseGcovCoverageResults(target *core.BuildTarget, coverage *core.TestCoverage, data []byte) error {
	// The data we have is a sequence of .gcov files smashed together.
	lines := bytes.Split(data, []byte{'\n'})
	if len(lines) == 0 {
		return fmt.Errorf("Empty coverage file")
	}
	currentFilename := ""
	for lineno, line := range lines {
		fields := bytes.Split(line, []byte{':'})
		if len(fields) < 3 {
			continue
		}
		if bytes.Equal(fields[2], []byte("Source")) {
			if len(fields) < 4 {
				return fmt.Errorf("Bad source on line %d: %s", lineno, string(line))
			}
			currentFilename = string(fields[3])
			continue
		}
		covLine, err := strconv.Atoi(strings.TrimSpace(string(fields[1])))
		if err != nil {
			return fmt.Errorf("Bad line number on line %d: %s", lineno, string(line))
		} else if covLine > 0 {
			coverage.Files[currentFilename] = append(coverage.Files[currentFilename], translateGcovCount(bytes.TrimSpace(fields[0])))
		}
	}
	return nil
}
Exemple #7
0
// Reads a .dat file where the entries are matricies of numbers
// separated by empty new lines and individually aligned with
// whitespace between row entries and newlines between rows
func Read(file []byte) []matrix.Matrix {
	data := make([]matrix.Matrix, 0)
	for _, mat := range bytes.Split(file, []byte("\n\n")) {
		temp := make(matrix.Matrix, 0)
		didParse := true
	Element:
		for _, row := range bytes.Split(mat, []byte("\n")) {
			floatsAsStrings := strings.Fields(string(row))
			elms := make([]matrix.Element, 0)
			for _, s := range floatsAsStrings {
				f, err := strconv.ParseFloat(s, 64)
				if err != nil {
					didParse = false
					break Element
				}
				elms = append(elms, matrix.Element(f))
			}
			temp = append(temp, elms)
		}

		if didParse && len(temp[0]) > 0 {
			data = append(data, temp)
		}
	}
	return data
}
Exemple #8
0
func getWikiList() []wikiListItem {
	if len(WikiList) == 0 {
		body, err := ioutil.ReadFile("wiki5000.csv")
		if err != nil {
			log.Printf("Error loading wiki5000.csv: %s\n", err)
		}
		currentItem := new(wikiListItem)
		lines := bytes.Split(body, []byte{'\n'})
		for _, line := range lines {
			parts := bytes.Split(line, []byte{','})
			for i, p := range parts {
				switch i {
				case 0:
					currentItem.Rank, _ = strconv.Atoi(string(p))
				case 1:
					currentItem.Link = string(p)
				case 2:
					currentItem.Title = string(p)
				case 3:
					currentItem.Views, _ = strconv.Atoi(string(p))
				}
			}
			WikiList = append(WikiList, *currentItem)
			currentItem = new(wikiListItem)
		}
		return WikiList
	} else {
		return WikiList
	}
}
Exemple #9
0
func (v otrV3) parseFragmentPrefix(c *Conversation, data []byte) (rest []byte, ignore bool, ok bool) {
	if len(data) < 23 {
		return data, false, false
	}

	header := data[:23]
	headerPart := bytes.Split(header, fragmentSeparator)[0]
	itagParts := bytes.Split(headerPart, fragmentItagsSeparator)

	if len(itagParts) < 3 {
		return data, false, false
	}

	senderInstanceTag, err1 := parseItag(itagParts[1])
	if err1 != nil {
		return data, false, false
	}

	receiverInstanceTag, err2 := parseItag(itagParts[2])
	if err2 != nil {
		return data, false, false
	}

	if err := v.verifyInstanceTags(c, senderInstanceTag, receiverInstanceTag); err != nil {
		switch err {
		case errInvalidOTRMessage:
			return data, false, false
		case errReceivedMessageForOtherInstance:
			return data, true, true
		}
	}

	return data[23:], false, true
}
Exemple #10
0
func (blp *Blp) parseRotateEvent(line []byte) {
	blp.RotateEventCount++
	rem := bytes.Split(line, BINLOG_ROTATE_TO)
	rem2 := bytes.Split(rem[1], POS)
	rotateFilename := strings.TrimSpace(string(rem2[0]))
	rotatePos, err := strconv.ParseUint(string(rem2[1]), 10, 64)
	if err != nil {
		panic(NewBinlogParseError(CODE_ERROR, fmt.Sprintf("Error in extracting rotate pos %v from line %s", err, string(line))))
	}
	if !blp.globalState.usingRelayLogs {
		//If the file being parsed is a binlog,
		//then the rotate events only correspond to itself.
		blp.currentPosition.Position.MasterFilename = rotateFilename
		blp.currentPosition.Position.MasterPosition = rotatePos
	} else {
		//For relay logs, the rotate events could be that of relay log or the binlog,
		//the prefix of rotateFilename is used to test which case is it.
		logsDir, relayFile := path.Split(blp.currentPosition.Position.RelayFilename)
		currentPrefix := strings.Split(relayFile, ".")[0]
		rotatePrefix := strings.Split(rotateFilename, ".")[0]
		if currentPrefix == rotatePrefix {
			//relay log rotated
			blp.currentPosition.Position.RelayFilename = path.Join(logsDir, rotateFilename)
		} else {
			//master file rotated
			blp.currentPosition.Position.MasterFilename = rotateFilename
			blp.currentPosition.Position.MasterPosition = rotatePos
		}
	}
}
Exemple #11
0
func TestIterWords(t *testing.T) {
	tests := []struct {
		in  []byte
		out [][]byte
	}{
		{[]byte("hello world"), bytes.Split([]byte("hello:world"), []byte(":"))},
		{[]byte("    hello    world   "), bytes.Split([]byte("hello:world"), []byte(":"))},
	}

	for i, test := range tests {
		out := [][]byte{}
		f := func(word []byte) {
			out = append(out, word)
		}
		IterWords(test.in, f)
		if len(out) != len(test.out) {
			t.Logf("%d: wrong output length: got %d want %d", i, len(out), len(test.out))
		}
		for j := range out {
			if !bytes.Equal(out[j], test.out[j]) {
				t.Logf("%d:%d: don't match. got %q want %q", i, j, out[j], test.out[j])
				t.Fail()
			}
		}
	}
}
Exemple #12
0
func DiffBytes(origb, endb []byte) []Diff {
	origl := bytes.Split(origb, []byte("\n"), -1)
	endl := bytes.Split(endb, []byte("\n"), -1)

	// Check if the streams are at all different
	// Do length check first for efficiency reasons.
	if len(origl) == len(endl) {
		if bytes.Equal(origb, endb) {
			// Bytes are equal!
			return nil
		}
	}

	for i, _ := range origl {
		if i >= len(endl) {
			fmt.Println("Out of range panic coming up!")
			fmt.Println(origl, endl, i)
		}
		if bytes.Equal(origl[i], endl[i]) {
			continue
		}
		// Search forward for the line
		for j := i; j < len(endl); j++ {
			if bytes.Equal(origl[i], endl[j]) {
				fmt.Println("Found match for line", i, "at line", j)
			}
		}
		for j := i; j >= 0; j-- {
			if bytes.Equal(origl[i], endl[j]) {
				fmt.Println("Found match for line", i, "at line", j)
			}
		}
	}
	return nil
}
Exemple #13
0
// NewRequestHeader returns RequestHeader from bytes
func NewRequestHeader(b []byte) (*RequestHeader, error) {
	lines := bytes.Split(b, eol)
	reqline := bytes.Split(lines[0], []byte{' '})

	headers := [][][]byte{}
	bodySize := 0

	headerLines := lines[1:]
	for _, l := range headerLines {
		tokens := bytes.SplitN(l, []byte{':', ' '}, 2)
		if len(tokens) == 2 {
			headers = append(headers, tokens)
		}

		if bytes.Equal(bytes.ToLower(tokens[0]), []byte("content-length")) {
			size, err := strconv.Atoi(string(tokens[1]))
			if err != nil {
				return nil, err
			}
			bodySize = size
		}
	}

	r := &RequestHeader{
		ReqLineTokens: reqline,
		Headers:       headers,
		BodySize:      bodySize,
		BodyRead:      0,
	}
	return r, nil
}
Exemple #14
0
// agentsMap returns a mapping of agents used by the web app to their
// descriptions.
//
// Returns an error if they can't be retrieved correctly.
func agentsMap() ([]map[string]string, error) {
	command := "mancalai_cli"
	args := []string{"-tool", "compare", "-agents"}
	output, err := exec.Command(command, args...).Output()
	if err != nil {
		return nil, fmt.Errorf(
			"Couldn't complete command '%s'",
			command,
		)
	}
	lines := bytes.Split(output, []byte{'\n'})
	var agents []map[string]string
	separator := []byte{':', ' '}
	for _, line := range lines {
		if len(line) > 0 {
			nameAndDescription := bytes.Split(line, separator)
			name := nameAndDescription[0]
			description := nameAndDescription[1]
			agents = append(agents, map[string]string{
				"name":        string(name),
				"description": string(description),
			})
		}
	}
	return agents, nil
}
// equivalent does a linewise comparison of a and b.
// For each line:
//    got exactly equals want OR
//    want ends in " //substr" and is a substring of got OR
//    want ends in " //slashes" and runtime.GOOS == "windows" and got equals want with its slashes swapped for backslashes
// Otherwise equivalent returns false.
func equivalent(got, want []byte) bool {
	var (
		gotLines  = bytes.Split(got, newline)
		wantLines = bytes.Split(want, newline)
		substr    = []byte(" //substr")
		slashes   = []byte(" //slashes")
		slash     = []byte{'/'}
		gg, ww    []byte
	)

	if len(gotLines) != len(wantLines) {
		return false
	}

	for i := range gotLines {
		gg, ww = gotLines[i], wantLines[i]
		if bytes.HasSuffix(ww, slashes) {
			ww = bytes.Replace(ww[:len(ww)-len(slashes)], slash, []byte{filepath.Separator}, -1)
		}
		if !(bytes.Equal(gg, ww) || bytes.HasSuffix(ww, substr) && bytes.Contains(gg, ww[:len(ww)-len(substr)])) {
			return false
		}
	}
	return true
}
Exemple #16
0
func compare(want, have io.Reader) ([]int, bool, error) {
	w, err := ioutil.ReadAll(want)
	if err != nil {
		return nil, false, err
	}
	h, err := ioutil.ReadAll(have)
	if err != nil {
		return nil, false, err
	}
	wb := bytes.Split(w, []byte("\n"))
	hb := bytes.Split(h, []byte("\n"))

	if len(wb) != len(hb) {
		return nil, false, nil
	}

	var diff []int
	ok := true
	for i := 0; i < len(wb); i++ {
		if bytes.Compare(wb[i], hb[i]) != 0 {
			diff = append(diff, i)
			ok = false
		}
	}

	return diff, ok, nil
}
Exemple #17
0
func netshInterfaceIPv6ShowAddress(name string) ([]string, error) {
	// TODO: need to test ipv6 netmask too, but netsh does not outputs it
	out, err := runCmd("netsh", "interface", "ipv6", "show", "address", "interface=\""+name+"\"")
	if err != nil {
		return nil, err
	}
	addrs := make([]string, 0)
	lines := bytes.Split(out, []byte{'\r', '\n'})
	for _, line := range lines {
		if !bytes.HasPrefix(line, []byte("Address")) {
			continue
		}
		if !bytes.HasSuffix(line, []byte("Parameters")) {
			continue
		}
		f := bytes.Split(line, []byte{' '})
		if len(f) != 3 {
			continue
		}
		// remove scope ID if present
		f = bytes.Split(f[1], []byte{'%'})
		addrs = append(addrs, string(bytes.ToLower(bytes.TrimSpace(f[0]))))
	}
	return addrs, nil
}
Exemple #18
0
// TestHostKeyFile tests to read and write from HostKeyFile
func TestHostKeyFile(t *testing.T) {
	os.Remove(hostFileBackup)
	defer os.Remove(hostFileBackup)

	in := NewHostKeyFile(hostFile)
	out := NewHostKeyFile(hostFileBackup)

	hostKeys, err := in.GetHostKeys()
	if err != nil {
		t.Fatal("reading host file error:", err)
	}

	for i, v := range hostKeys {
		if err = out.PutHostKey(i, v); err != nil {
			t.Fatal("append error:", err)
		}
	}

	keysByte, _ := ioutil.ReadFile(hostFile)
	keysByteBackup, _ := ioutil.ReadFile(hostFileBackup)
	keyBytes := bytes.Split(keysByte, []byte{'\n'})
	keyBytesBackup := bytes.Split(keysByteBackup, []byte{'\n'})
	for _, keyByte := range keyBytes {
		find := false
		for _, keyByteBackup := range keyBytesBackup {
			find = bytes.Compare(keyByte, keyByteBackup) == 0
			if find {
				break
			}
		}
		if !find {
			t.Fatalf("host file difference")
		}
	}
}
Exemple #19
0
func saveHandler(w http.ResponseWriter, r *http.Request, title string) {
	page, _ := loadPage(title)
	boder := bytes.Split(page.Body, []byte("~![META]!~"))
	confer := bytes.Split(boder[0], []byte("::"))
	if strings.TrimSpace(r.FormValue("password_")) == strings.TrimSpace(string(confer[2])) {
		body := r.FormValue("body")
		public_edit := "false"
		public_view := "false"
		if r.FormValue("public_view") == "on" {
			public_view = "true"
		}
		if r.FormValue("public_edit") == "on" {
			public_edit = "true"
		}
		new_password := r.FormValue("new_password")
		body = public_view + "::" + public_edit + "::" + new_password + "\n~![META]!~\n" + body
		p := &Page{Title: title, Body: []byte(body)}
		err := p.save()
		if err != nil {
			http.Error(w, err.Error(), http.StatusInternalServerError)
			return
		}
		http.Redirect(w, r, "/view/"+title+"?password="******"&saved=succes", http.StatusFound)
	} else {
		http.Redirect(w, r, "/view/"+title+"?password="******"password_"))+"&saved=fail", http.StatusFound)
	}
}
func (server *CollectionServer) handlePacket(packet []byte) {
	server.metrics.UpdateCounter("statsd.packets_received", 1, 1)

	metrics := bytes.Split(packet, []byte("\n"))

	for _, metric := range metrics {
		parts := bytes.Split(metric, []byte(":"))
		key := string(parts[0])

		for _, bit := range parts[1:] {
			fields := bytes.Split(bit, []byte("|"))

			if len(fields) == 1 {
				server.metrics.UpdateCounter("statsd.bad_lines_seen", 1, 1)
				continue
			}

			sampleRate := float64(1)
			value, _ := strconv.ParseFloat(string(fields[0]), 64)

			if len(fields) == 3 {
				sampleRate, _ = strconv.ParseFloat(string(fields[2]), 64)
			}

			switch {
			case string(fields[1]) == "ms":
				server.metrics.UpdateTimer(key, value)
			case string(fields[1]) == "g":
				server.metrics.UpdateGauge(key, value)
			default:
				server.metrics.UpdateCounter(key, value, sampleRate)
			}
		}
	}
}
Exemple #21
0
// Records uses Jaro-Winkler distance to parse WHOIS queries.
// Other than .com domains may not be supported.
func Records(data []byte) record {
	lines := bytes.Split(data, []byte("\n"))
	query := make(map[string]string)
	var record record
	for _, line := range lines {
		if jwd.Calculate(strings.Split(string(line), ":")[0], "Referral") > 0.7 && bytes.Contains(line, []byte(":")) {
			record.Referral = strings.TrimSpace(strings.Split(string(line), ": ")[1])
		}
		if len(line) > 0 && bytes.Contains(line, []byte(":")) && len(bytes.TrimSpace(bytes.Split(line, []byte(":"))[1])) > 0 {
			this := string(line)
			if len(query[strings.TrimSpace(strings.Split(this, ":")[0])]) != 0 {
				n := query[strings.TrimSpace(strings.Split(this, ":")[0])]
				query[strings.TrimSpace(strings.Split(this, ":")[0])] = n + "," + strings.TrimSpace(strings.Split(this, ":")[1])
			} else {
				query[strings.TrimSpace(strings.Split(this, ":")[0])] = strings.TrimSpace(strings.Split(this, ":")[1])
			}
		}
	}
	record.Updated = find(query, "Updated")
	record.Created = find(query, "Created")
	record.Nameservers = strings.Split(find(query, "Nameservers"), ",")
	record.Status = strings.Split(find(query, "Status"), ",")
	record.Expiration = find(query, "Expiration")
	return record
}
Exemple #22
0
func (bl *Malwaredomains) Init(cacheDir string) (err error) {
	bl.domains = make(map[string]*MalwareDomain)

	domainsTxtFile, err := CacheGet(cacheDir, "http://mirror1.malwaredomains.com/files/domains.txt", 24)
	if err != nil {
		return err
	}

	b, _ := ioutil.ReadFile(domainsTxtFile)
	lines := bytes.Split(b, []byte("\n"))
	for _, line := range lines {
		if bytes.HasPrefix(line, []byte("#")) || len(line) == 0 {
			continue
		}

		f := bytes.Split(line, []byte("\t"))
		if len(f) < 5 {
			continue
		}
		fDomain := string(bytes.ToLower(f[2]))
		fType := string(f[3])
		fRef := string(f[4])

		bl.domains[fDomain] = &MalwareDomain{fDomain, fType, fRef}
	}

	return nil
}
Exemple #23
0
func decodeChangesetState(data []byte) (State, error) {
	// example
	// ---
	// last_run: 2016-07-02 22:46:01.422137422 Z
	// sequence: 1912325

	lines := bytes.Split(data, []byte("\n"))

	parts := bytes.Split(lines[1], []byte(":"))
	timeString := string(bytes.TrimSpace(bytes.Join(parts[1:], []byte(":"))))
	t, err := time.Parse(
		"2006-01-02 15:04:05.999999999 Z",
		timeString)
	if err != nil {
		return State{}, err
	}

	parts = bytes.Split(lines[2], []byte(":"))
	n, err := strconv.ParseUint(string(bytes.TrimSpace(parts[1])), 10, 64)
	if err != nil {
		return State{}, err
	}

	return State{
		SeqNum:    n,
		Timestamp: t,
	}, nil
}
Exemple #24
0
func computeInsertedDeletedLines(oldCodeR, newCodeR io.Reader) (id InsDel, err error) {
	var i, d int
	// TODO(flowlo): get rid of ReadAll
	var oldCode, newCode []byte
	if oldCode, err = ioutil.ReadAll(oldCodeR); err != nil {
		return
	}

	if newCode, err = ioutil.ReadAll(newCodeR); err != nil {
		return
	}
	currentFields := bytes.Split(newCode, []byte("\n"))
	oldFields := bytes.Split(oldCode, []byte("\n"))
	for _, val := range currentFields {
		if !bytes.Contains(oldCode, val) {
			i++
		}
	}
	for _, val := range oldFields {
		if !bytes.Contains(oldCode, val) {
			d++
		}
	}
	return InsDel{i, d}, nil
}
Exemple #25
0
// ParseMaps parses /proc/$$/maps into a useable data structure.
func (p Process) ParseMaps() (maps Mapping, err error) {
	// TODO: slurp or use a reader? /proc/$$/maps shouldn't be large...
	buf, err := ioutil.ReadFile(p.maps)
	if err != nil {
		return nil, err
	}

	lines := bytes.Split(buf, []byte{'\n'})

	var m Map
	for _, line := range lines {
		if len(line) == 0 {
			continue
		}

		parts := bytes.Split(line, []byte{' '})

		// 6 parts minimum, but no max since sometimes
		// there's a big space between inode and path.
		// Prior to 2.0 there was only 5, but I doubt anybody
		// has a kernel from ~2004 that runs Go.
		if len(parts) < 6 {
			return maps, errors.New("proc.ParseMaps not enough portions.")
		}

		// Convert the address ranges from hex to uintptr.
		addr := bytes.Split(parts[0], []byte{'-'})
		m.Start = hexToUintptr(addr[0])
		m.End = hexToUintptr(addr[1])

		// Convert 'rwxp' to permissions bitmask.
		for _, c := range parts[1] {
			switch c {
			case 'r':
				m.Perms |= Read
			case 'w':
				m.Perms |= Write
			case 'x':
				m.Perms |= Exec
			case 'p':
				m.Perms |= Priv
			case 's':
				m.Perms |= Shared
			}
		}

		m.Offset = hexToUintptr(parts[2])

		// Split dev into Major:Minor parts.
		dev := bytes.Split(parts[3], []byte{':'})
		m.Maj = parseUint(dev[0])
		m.Min = parseUint(dev[1])

		m.Inode = parseUint(parts[4])
		m.Path = string(parts[len(parts)-1])
		m.Type = p.ParseType(m.Path)
		maps = append(maps, m)
	}
	return maps, nil
}
Exemple #26
0
func ParseRoute(line []byte) (*Route, error) {
	route := &Route{}
	chunks := bytes.Split(line, []byte(","))
	urlParams := bytes.Split(chunks[0], []byte(" "))
	route.Method = strings.ToUpper(string(urlParams[0]))
	route.Path = string(urlParams[1])
	for i, chunk := range chunks {
		if i != 0 {
			chunkParts := bytes.Split(chunk, []byte(":"))
			if len(chunkParts) != 2 {
				return nil, fmt.Errorf("unexpected route parameters: %v", string(line))
			}
			name := string(bytes.TrimSpace(chunkParts[0]))
			value := string(bytes.TrimSpace(chunkParts[1]))
			if value[0] == '\'' && value[len(value)-1] == '\'' {
				value = value[1 : len(value)-1]
			}
			if name == "name" {
				route.Name = value
			}
			if name == "collection" && value == "true" {
				route.Collection = true
			}
			if name == "custom" && value == "true" {
				route.Custom = true
			}
		}
	}
	return route, nil
}
Exemple #27
0
func netshInterfaceIPv6ShowAddress(name string) ([]string, error) {
	// TODO: need to test ipv6 netmask too, but netsh does not outputs it
	out, err := runCmd("netsh", "interface", "ipv6", "show", "address", "interface=\""+name+"\"")
	if err != nil {
		return nil, err
	}
	addrs := make([]string, 0)
	lines := bytes.Split(out, []byte{'\r', '\n'})
	for _, line := range lines {
		if !bytes.HasPrefix(line, []byte("Address")) {
			continue
		}
		if !bytes.HasSuffix(line, []byte("Parameters")) {
			continue
		}
		f := bytes.Split(line, []byte{' '})
		if len(f) != 3 {
			continue
		}
		// remove scope ID if present
		f = bytes.Split(f[1], []byte{'%'})

		// netsh can create IPv4-embedded IPv6 addresses, like fe80::5efe:192.168.140.1.
		// Convert these to all hexadecimal fe80::5efe:c0a8:8c01 for later string comparisons.
		ipv4Tail := regexp.MustCompile(`:\d+\.\d+\.\d+\.\d+$`)
		if ipv4Tail.Match(f[0]) {
			f[0] = []byte(ParseIP(string(f[0])).String())
		}

		addrs = append(addrs, string(bytes.ToLower(bytes.TrimSpace(f[0]))))
	}
	return addrs, nil
}
Exemple #28
0
func (s *S) TestSimpleJsonMessageFormatterJsonInJson(c *check.C) {
	buf := bytes.Buffer{}
	encoder := json.NewEncoder(&buf)
	writer := SimpleJsonMessageEncoderWriter{encoder}
	for _, l := range bytes.Split([]byte(mockPullOutput), []byte("\n")) {
		writer.Write(l)
	}
	parts := bytes.Split(buf.Bytes(), []byte("\n"))
	parts = append([][]byte{[]byte(`{"message":"no json 1\n"}`)}, parts...)
	parts = append(parts, []byte(`{"message":"no json 2\n"}`))
	outBuf := bytes.Buffer{}
	streamWriter := NewStreamWriter(&outBuf, nil)
	streamWriter.Write(bytes.Join(parts, []byte("\n")))
	c.Assert(outBuf.String(), check.Equals, "no json 1\n"+
		"latest: Pulling from tsuru/static\n"+
		"a6aa3b66376f: Already exists\n"+
		"106572778bf7: Pulling fs layer\n"+
		"bac681833e51: Pulling fs layer\n"+
		"7302e23ef08a: Pulling fs layer\n"+
		"bac681833e51: Verifying Checksum\n"+
		"bac681833e51: Download complete\n"+
		"106572778bf7: Verifying Checksum\n"+
		"106572778bf7: Download complete\n"+
		"7302e23ef08a: Verifying Checksum\n"+
		"7302e23ef08a: Download complete\n"+
		"106572778bf7: Pull complete\n"+
		"bac681833e51: Pull complete\n"+
		"7302e23ef08a: Pull complete\n"+
		"Digest: sha256:b754472891aa7e33fc0214e3efa988174f2c2289285fcae868b7ec8b6675fc77\n"+
		"Status: Downloaded newer image for 192.168.50.4:5000/tsuru/static\n"+
		"no json 2\n")
}
Exemple #29
0
func decodeIntervalState(data []byte, interval string) (State, error) {
	// example
	// ---
	// #Sat Jul 16 06:14:03 UTC 2016
	// txnMaxQueried=836439235
	// sequenceNumber=2010580
	// timestamp=2016-07-16T06\:14\:02Z
	// txnReadyList=
	// txnMax=836439235
	// txnActiveList=836439008

	var (
		state State
		n     int
		err   error
	)

	for _, l := range bytes.Split(data, []byte("\n")) {
		parts := bytes.Split(l, []byte("="))

		if bytes.Equal(parts[0], []byte("sequenceNumber")) {
			n, err = strconv.Atoi(string(bytes.TrimSpace(parts[1])))
			if err != nil {
				return State{}, err
			}

			switch interval {
			case "minute":
				state.SeqNum = uint64(n)
			case "hour":
				state.SeqNum = uint64(n)
			case "day":
				state.SeqNum = uint64(n)
			default:
				panic("unsupported interval")
			}
		} else if bytes.Equal(parts[0], []byte("txnMax")) {
			state.TxnMax, err = strconv.Atoi(string(bytes.TrimSpace(parts[1])))
			if err != nil {
				return State{}, err
			}
		} else if bytes.Equal(parts[0], []byte("txnMaxQueried")) {
			state.TxnMaxQueried, err = strconv.Atoi(string(bytes.TrimSpace(parts[1])))
			if err != nil {
				return State{}, err
			}
		} else if bytes.Equal(parts[0], []byte("timestamp")) {
			timeString := string(bytes.TrimSpace(parts[1]))
			state.Timestamp, err = time.Parse(
				"2006-01-02T15\\:04\\:05Z",
				timeString)
			if err != nil {
				return State{}, err
			}
		}
	}

	return state, nil
}
Exemple #30
0
func (t *HTTPSTranslator) isConnectSucceeded(resp []byte) bool {
	lines := bytes.Split(resp, []byte("\r\n"))
	tokens := bytes.Split(lines[0], []byte(" "))
	if bytes.Equal(tokens[1], []byte("200")) {
		return true
	}
	return false
}