func (l *Loop) InitBound() {
// The bounding rectangle of a loop is not necessarily the same as the
// bounding rectangle of its vertices. First, the loop may wrap entirely
// around the sphere (e.g. a loop that defines two revolutions of a
// candy-cane stripe). Second, the loop may include one or both poles.
// Note that a small clockwise loop near the equator contains both
// poles.
bounder := NewRectBounder()
for i := 0; i <= len(l.vertices); i++ {
bounder.AddPoint(l.vertex(i))
}
b := bounder.Bound()
// Note that we need to initialize l.bound with a temporary value since
// Contains() does a bounding rectangle check before doing anything
// else.
l.bound = FullRect()
if l.Contains(PointFromCoords(0, 0, 1)) {
b = Rect{
Lat: r1.Interval{b.Lat.Lo, math.Pi / 2},
Lng: s1.FullInterval(),
}
}
// If a loop contains the south pole, then either it wraps entirely
// around the sphere (full longitude range), or it also contains the
// north pole in which case b.Lng.IsFull() due to the test above.
// Either way, we only need to do the south pole containment test if
// b.Lng.IsFull()
if b.Lng.IsFull() && l.Contains(PointFromCoords(0, 0, -1)) {
b.Lat.Lo = -math.Pi / 2
}
l.bound = b
}
func (r *RectBounder) AddPoint(b *Point) {
ll := LatLngFromPoint(*b)
if r.bound.IsEmpty() {
r.bound = r.bound.AddPoint(ll)
} else {
// We can't just call bound.AddPoint(ll) here, since we need to
// ensure that all the longitudes between "a" and "b" are
// included.
r.bound = r.bound.Union(RectFromPointPair(r.latlng, ll))
// Check whether the min/max latitude occurs in the edge
// interior. We find the normal to the plane containing AB,
// and then a vector "dir" in this plane that also passes
// through the equator. We use RobustCrossProd to ensure that
// the edge normal is accurate even when the two points are
// very close together.
a_cross_b := r.a.PointCross(*b)
dir := a_cross_b.Cross(PointFromCoords(0, 0, 1).Vector)
da := dir.Dot(r.a.Vector)
db := dir.Dot(b.Vector)
if da*db < 0 {
// min/max latitude occurs in the edge interior.
abslat := math.Acos(math.Abs(a_cross_b.Z / a_cross_b.Norm()))
if da < 0 {
// It's possible that abslat < r.Lat.Lo due to
// numerical errors.
r.bound.Lat.Hi = math.Max(abslat, r.bound.Lat.Hi)
} else {
r.bound.Lat.Lo = math.Min(-abslat, r.bound.Lat.Lo)
}
// If the edge comes very close to the north or south
// pole then we may not be certain which side of the
// pole it is on. We handle this by expanding the
// longitude bounds if the maximum latitude is
// approximately Pi/2.
if abslat >= math.Pi/2-1e-15 {
r.bound.Lng = s1.FullInterval()
}
}
}
r.a = b
r.latlng = ll
}
"fmt"
"math"
"github.com/calendreco/gos2/r1"
"github.com/calendreco/gos2/s1"
)
// Rect represents a closed latitude-longitude rectangle.
type Rect struct {
Lat r1.Interval
Lng s1.Interval
}
var (
validRectLatRange = r1.Interval{-math.Pi / 2, math.Pi / 2}
validRectLngRange = s1.FullInterval()
)
// FullRect returns the full rectangle.
func FullRect() Rect { return Rect{validRectLatRange, validRectLngRange} }
func EmptyRect() Rect { return Rect{r1.EmptyInterval(), s1.EmptyInterval()} }
// RectFromLatLng constructs a rectangle containing a single point p.
func RectFromLatLng(p LatLng) Rect {
return Rect{
Lat: r1.Interval{p.Lat.Radians(), p.Lat.Radians()},
Lng: s1.Interval{p.Lng.Radians(), p.Lng.Radians()},
}
}
func (c Cell) RectBound() Rect {
if c.level > 0 {
// Except for cells at level 0, the latitude and longitude
// extremes are attained at the vertices. Furthermore, the
// latitude range is determined by one pair of diagonally
// opposite vertices and the longitude range is determined by
// the other pair.
//
// We first determine which corner (i,j) of the cell has the
// largest absolute latitude. To maximize latitude, we want to
// find the point in the cell that has the largest absolute
// z-coordinate and the smallest absolute x- and y-coordinates.
// To do this we look at each coordinate (u and v), and
// determine whether we want to minimize or maximize that
// coordinate based on the axis direction and the cell's (u,v)
// quadrant.
u := c.uv.X.Lo + c.uv.X.Hi
v := c.uv.Y.Lo + c.uv.Y.Hi
i, j := ijFromFaceZ(c.face, u, v)
// We grow the bounds slightly to make sure that the bounding
// rectangle also contains the normalized versions of the
// vertices. Note that the maximum result magnitude is Pi, with
// a floating-point exponent of 1. Therefore adding or
// subtracting 2**-51 will always change the result.
lat := r1.IntervalFromPointPair(c.Latitude(i, j), c.Latitude(1-i, 1-j))
lat = lat.Expanded(maxError).Intersection(validRectLatRange)
if lat.Lo == -M_PI_2 || lat.Hi == M_PI_2 {
return Rect{lat, s1.FullInterval()}
}
lng := s1.IntervalFromPointPair(c.Longitude(i, 1-j), c.Longitude(1-i, j))
return Rect{lat, lng.Expanded(maxError)}
}
// The 4 cells around the equator extend to +/-45 degrees latitude at
// the midpoints of their top and bottom edges. The two cells covering
// the poles extend down to +/-35.26 degrees at their vertices.
//
// The face centers are the +X, +Y, +Z, -X, -Y, -Z axes in that order.
switch c.face {
case 0:
return Rect{
r1.Interval{-M_PI_4, M_PI_4},
s1.Interval{-M_PI_4, M_PI_4},
}
case 1:
return Rect{
r1.Interval{-M_PI_4, M_PI_4},
s1.Interval{M_PI_4, 3 * M_PI_4},
}
case 2:
return Rect{
r1.Interval{poleMinLat, M_PI_2},
s1.Interval{-math.Pi, math.Pi},
}
case 3:
return Rect{
r1.Interval{-M_PI_4, M_PI_4},
s1.Interval{3 * M_PI_4, -3 * M_PI_4},
}
case 4:
return Rect{
r1.Interval{-M_PI_4, M_PI_4},
s1.Interval{-3 * M_PI_4, -M_PI_4},
}
default:
return Rect{
r1.Interval{-M_PI_2, -poleMinLat},
s1.Interval{-math.Pi, math.Pi},
}
}
}