Exemple #1
0
func (d *driver) CreateEndpoint(nid, eid string, epInfo driverapi.EndpointInfo, epOptions map[string]interface{}) error {
	var reqIface *api.EndpointInterface

	if epInfo == nil {
		return fmt.Errorf("must not be called with nil EndpointInfo")
	}

	iface := epInfo.Interface()
	if iface != nil {
		addr4 := iface.Address()
		addr6 := iface.AddressIPv6()
		reqIface = &api.EndpointInterface{
			Address:     addr4.String(),
			AddressIPv6: addr6.String(),
			MacAddress:  iface.MacAddress().String(),
		}
	}
	create := &api.CreateEndpointRequest{
		NetworkID:  nid,
		EndpointID: eid,
		Interface:  reqIface,
		Options:    epOptions,
	}
	var res api.CreateEndpointResponse
	if err := d.call("CreateEndpoint", create, &res); err != nil {
		return err
	}

	inIface, err := parseInterface(res)
	if err != nil {
		return err
	}
	if reqIface != nil && inIface != nil {
		// We're not supposed to add interface if there is already
		// one. Attempt to roll back
		return errorWithRollback("driver attempted to add interface ignoring the one provided", d.DeleteEndpoint(nid, eid))
	}

	if inIface != nil {
		var addr4, addr6 net.IPNet
		if inIface.Address != nil {
			addr4 = *(inIface.Address)
		}
		if inIface.AddressIPv6 != nil {
			addr6 = *(inIface.AddressIPv6)
		}
		if err := epInfo.AddInterface(inIface.MacAddress, addr4, addr6); err != nil {
			return errorWithRollback(fmt.Sprintf("failed to AddInterface %v: %s", inIface, err), d.DeleteEndpoint(nid, eid))
		}
	}
	return nil
}
func (d *driver) CreateEndpoint(nid, eid types.UUID, epInfo driverapi.EndpointInfo,
	epOptions map[string]interface{}) error {
	if err := validateID(nid, eid); err != nil {
		return err
	}

	n := d.network(nid)
	if n == nil {
		return fmt.Errorf("network id %q not found", nid)
	}

	ep := &endpoint{
		id: eid,
	}

	if epInfo != nil && (len(epInfo.Interfaces()) > 0) {
		addr := epInfo.Interfaces()[0].Address()
		ep.addr = &addr
		ep.mac = epInfo.Interfaces()[0].MacAddress()
		n.addEndpoint(ep)
		return nil
	}

	ipID, err := d.ipAllocator.GetID()
	if err != nil {
		return fmt.Errorf("could not allocate ip from subnet %s: %v",
			bridgeSubnet.String(), err)
	}

	ep.addr = &net.IPNet{
		Mask: bridgeSubnet.Mask,
	}
	ep.addr.IP = make([]byte, 4)

	binary.BigEndian.PutUint32(ep.addr.IP, bridgeSubnetInt+ipID)

	ep.mac = netutils.GenerateMACFromIP(ep.addr.IP)

	err = epInfo.AddInterface(1, ep.mac, *ep.addr, net.IPNet{})
	if err != nil {
		return fmt.Errorf("could not add interface to endpoint info: %v", err)
	}

	n.addEndpoint(ep)

	return nil
}
Exemple #3
0
func (d *driver) CreateEndpoint(nid, eid types.UUID, epInfo driverapi.EndpointInfo, epOptions map[string]interface{}) error {
	if epInfo == nil {
		return fmt.Errorf("must not be called with nil EndpointInfo")
	}

	reqIfaces := make([]*endpointInterface, len(epInfo.Interfaces()))
	for i, iface := range epInfo.Interfaces() {
		addr4 := iface.Address()
		addr6 := iface.AddressIPv6()
		reqIfaces[i] = &endpointInterface{
			ID:          iface.ID(),
			Address:     addr4.String(),
			AddressIPv6: addr6.String(),
			MacAddress:  iface.MacAddress().String(),
		}
	}
	create := &createEndpointRequest{
		NetworkID:  string(nid),
		EndpointID: string(eid),
		Interfaces: reqIfaces,
		Options:    epOptions,
	}
	var res createEndpointResponse
	if err := d.call("CreateEndpoint", create, &res); err != nil {
		return err
	}

	ifaces, err := res.parseInterfaces()
	if err != nil {
		return err
	}
	if len(reqIfaces) > 0 && len(ifaces) > 0 {
		// We're not supposed to add interfaces if there already are
		// some. Attempt to roll back
		return errorWithRollback("driver attempted to add more interfaces", d.DeleteEndpoint(nid, eid))
	}
	for _, iface := range ifaces {
		var addr4, addr6 net.IPNet
		if iface.Address != nil {
			addr4 = *(iface.Address)
		}
		if iface.AddressIPv6 != nil {
			addr6 = *(iface.AddressIPv6)
		}
		if err := epInfo.AddInterface(iface.ID, iface.MacAddress, addr4, addr6); err != nil {
			return errorWithRollback(fmt.Sprintf("failed to AddInterface %v: %s", iface, err), d.DeleteEndpoint(nid, eid))
		}
	}
	return nil
}
Exemple #4
0
func (d *driver) CreateEndpoint(nid, eid types.UUID, epInfo driverapi.EndpointInfo, epOptions map[string]interface{}) error {
	var (
		ipv6Addr *net.IPNet
		err      error
	)

	defer sandbox.InitOSContext()()

	if epInfo == nil {
		return errors.New("invalid endpoint info passed")
	}

	if len(epInfo.Interfaces()) != 0 {
		return errors.New("non empty interface list passed to bridge(local) driver")
	}

	// Get the network handler and make sure it exists
	d.Lock()
	n, ok := d.networks[nid]
	d.Unlock()

	if !ok {
		return types.NotFoundErrorf("network %s does not exist", nid)
	}
	if n == nil {
		return driverapi.ErrNoNetwork(nid)
	}

	// Sanity check
	n.Lock()
	if n.id != nid {
		n.Unlock()
		return InvalidNetworkIDError(nid)
	}
	n.Unlock()

	// Check if endpoint id is good and retrieve correspondent endpoint
	ep, err := n.getEndpoint(eid)
	if err != nil {
		return err
	}

	// Endpoint with that id exists either on desired or other sandbox
	if ep != nil {
		return driverapi.ErrEndpointExists(eid)
	}

	// Try to convert the options to endpoint configuration
	epConfig, err := parseEndpointOptions(epOptions)
	if err != nil {
		return err
	}

	// Create and add the endpoint
	n.Lock()
	endpoint := &bridgeEndpoint{id: eid, config: epConfig}
	n.endpoints[eid] = endpoint
	n.Unlock()

	// On failure make sure to remove the endpoint
	defer func() {
		if err != nil {
			n.Lock()
			delete(n.endpoints, eid)
			n.Unlock()
		}
	}()

	// Generate a name for what will be the host side pipe interface
	hostIfName, err := netutils.GenerateIfaceName(vethPrefix, vethLen)
	if err != nil {
		return err
	}

	// Generate a name for what will be the sandbox side pipe interface
	containerIfName, err := netutils.GenerateIfaceName(vethPrefix, vethLen)
	if err != nil {
		return err
	}

	// Generate and add the interface pipe host <-> sandbox
	veth := &netlink.Veth{
		LinkAttrs: netlink.LinkAttrs{Name: hostIfName, TxQLen: 0},
		PeerName:  containerIfName}
	if err = netlink.LinkAdd(veth); err != nil {
		return err
	}

	// Get the host side pipe interface handler
	host, err := netlink.LinkByName(hostIfName)
	if err != nil {
		return err
	}
	defer func() {
		if err != nil {
			netlink.LinkDel(host)
		}
	}()

	// Get the sandbox side pipe interface handler
	sbox, err := netlink.LinkByName(containerIfName)
	if err != nil {
		return err
	}
	defer func() {
		if err != nil {
			netlink.LinkDel(sbox)
		}
	}()

	n.Lock()
	config := n.config
	n.Unlock()

	// Add bridge inherited attributes to pipe interfaces
	if config.Mtu != 0 {
		err = netlink.LinkSetMTU(host, config.Mtu)
		if err != nil {
			return err
		}
		err = netlink.LinkSetMTU(sbox, config.Mtu)
		if err != nil {
			return err
		}
	}

	// Attach host side pipe interface into the bridge
	if err = addToBridge(hostIfName, config.BridgeName); err != nil {
		return fmt.Errorf("adding interface %s to bridge %s failed: %v", hostIfName, config.BridgeName, err)
	}

	if !config.EnableUserlandProxy {
		err = setHairpinMode(host, true)
		if err != nil {
			return err
		}
	}

	// v4 address for the sandbox side pipe interface
	ip4, err := ipAllocator.RequestIP(n.bridge.bridgeIPv4, nil)
	if err != nil {
		return err
	}
	ipv4Addr := &net.IPNet{IP: ip4, Mask: n.bridge.bridgeIPv4.Mask}

	// Down the interface before configuring mac address.
	if err = netlink.LinkSetDown(sbox); err != nil {
		return fmt.Errorf("could not set link down for container interface %s: %v", containerIfName, err)
	}

	// Set the sbox's MAC. If specified, use the one configured by user, otherwise generate one based on IP.
	mac := electMacAddress(epConfig, ip4)
	err = netlink.LinkSetHardwareAddr(sbox, mac)
	if err != nil {
		return fmt.Errorf("could not set mac address for container interface %s: %v", containerIfName, err)
	}
	endpoint.macAddress = mac

	// Up the host interface after finishing all netlink configuration
	if err = netlink.LinkSetUp(host); err != nil {
		return fmt.Errorf("could not set link up for host interface %s: %v", hostIfName, err)
	}

	// v6 address for the sandbox side pipe interface
	ipv6Addr = &net.IPNet{}
	if config.EnableIPv6 {
		var ip6 net.IP

		network := n.bridge.bridgeIPv6
		if config.FixedCIDRv6 != nil {
			network = config.FixedCIDRv6
		}

		ones, _ := network.Mask.Size()
		if ones <= 80 {
			ip6 = make(net.IP, len(network.IP))
			copy(ip6, network.IP)
			for i, h := range mac {
				ip6[i+10] = h
			}
		}

		ip6, err := ipAllocator.RequestIP(network, ip6)
		if err != nil {
			return err
		}

		ipv6Addr = &net.IPNet{IP: ip6, Mask: network.Mask}
	}

	// Create the sandbox side pipe interface
	endpoint.srcName = containerIfName
	endpoint.addr = ipv4Addr

	if config.EnableIPv6 {
		endpoint.addrv6 = ipv6Addr
	}

	err = epInfo.AddInterface(ifaceID, endpoint.macAddress, *ipv4Addr, *ipv6Addr)
	if err != nil {
		return err
	}

	// Program any required port mapping and store them in the endpoint
	endpoint.portMapping, err = n.allocatePorts(epConfig, endpoint, config.DefaultBindingIP, config.EnableUserlandProxy)
	if err != nil {
		return err
	}

	return nil
}
Exemple #5
0
func (d *driver) CreateEndpoint(nid, eid types.UUID, epInfo driverapi.EndpointInfo, epOptions map[string]interface{}) error {
	var (
		ipv6Addr *net.IPNet
		err      error
	)

	if epInfo == nil {
		return errors.New("invalid endpoint info passed")
	}

	if len(epInfo.Interfaces()) != 0 {
		return errors.New("non empty interface list passed to bridge(local) driver")
	}

	// Get the network handler and make sure it exists
	d.Lock()
	n := d.network
	config := n.config
	d.Unlock()
	if n == nil {
		return driverapi.ErrNoNetwork(nid)
	}

	// Sanity check
	n.Lock()
	if n.id != nid {
		n.Unlock()
		return InvalidNetworkIDError(nid)
	}
	n.Unlock()

	// Check if endpoint id is good and retrieve correspondent endpoint
	ep, err := n.getEndpoint(eid)
	if err != nil {
		return err
	}

	// Endpoint with that id exists either on desired or other sandbox
	if ep != nil {
		return driverapi.ErrEndpointExists(eid)
	}

	// Try to convert the options to endpoint configuration
	epConfig, err := parseEndpointOptions(epOptions)
	if err != nil {
		return err
	}

	// Create and add the endpoint
	n.Lock()
	endpoint := &bridgeEndpoint{id: eid, config: epConfig}
	n.endpoints[eid] = endpoint
	n.Unlock()

	// On failure make sure to remove the endpoint
	defer func() {
		if err != nil {
			n.Lock()
			delete(n.endpoints, eid)
			n.Unlock()
		}
	}()

	// Generate a name for what will be the host side pipe interface
	name1, err := generateIfaceName()
	if err != nil {
		return err
	}

	// Generate a name for what will be the sandbox side pipe interface
	name2, err := generateIfaceName()
	if err != nil {
		return err
	}

	// Generate and add the interface pipe host <-> sandbox
	veth := &netlink.Veth{
		LinkAttrs: netlink.LinkAttrs{Name: name1, TxQLen: 0},
		PeerName:  name2}
	if err = netlink.LinkAdd(veth); err != nil {
		return err
	}

	// Get the host side pipe interface handler
	host, err := netlink.LinkByName(name1)
	if err != nil {
		return err
	}
	defer func() {
		if err != nil {
			netlink.LinkDel(host)
		}
	}()

	// Get the sandbox side pipe interface handler
	sbox, err := netlink.LinkByName(name2)
	if err != nil {
		return err
	}
	defer func() {
		if err != nil {
			netlink.LinkDel(sbox)
		}
	}()

	// Add bridge inherited attributes to pipe interfaces
	if config.Mtu != 0 {
		err = netlink.LinkSetMTU(host, config.Mtu)
		if err != nil {
			return err
		}
		err = netlink.LinkSetMTU(sbox, config.Mtu)
		if err != nil {
			return err
		}
	}

	// Attach host side pipe interface into the bridge
	if err = netlink.LinkSetMaster(host,
		&netlink.Bridge{LinkAttrs: netlink.LinkAttrs{Name: config.BridgeName}}); err != nil {
		return err
	}

	if !config.EnableUserlandProxy {
		err = netlink.LinkSetHairpin(host, true)
		if err != nil {
			return err
		}
	}

	// v4 address for the sandbox side pipe interface
	ip4, err := ipAllocator.RequestIP(n.bridge.bridgeIPv4, nil)
	if err != nil {
		return err
	}
	ipv4Addr := &net.IPNet{IP: ip4, Mask: n.bridge.bridgeIPv4.Mask}

	// Set the sbox's MAC. If specified, use the one configured by user, otherwise generate one based on IP.
	mac := electMacAddress(epConfig, ip4)
	err = netlink.LinkSetHardwareAddr(sbox, mac)
	if err != nil {
		return err
	}
	endpoint.macAddress = mac

	// v6 address for the sandbox side pipe interface
	ipv6Addr = &net.IPNet{}
	if config.EnableIPv6 {
		var ip6 net.IP

		network := n.bridge.bridgeIPv6
		if config.FixedCIDRv6 != nil {
			network = config.FixedCIDRv6
		}

		ones, _ := network.Mask.Size()
		if ones <= 80 {
			ip6 = make(net.IP, len(network.IP))
			copy(ip6, network.IP)
			for i, h := range mac {
				ip6[i+10] = h
			}
		}

		ip6, err := ipAllocator.RequestIP(network, ip6)
		if err != nil {
			return err
		}

		ipv6Addr = &net.IPNet{IP: ip6, Mask: network.Mask}
	}

	// Create the sandbox side pipe interface
	intf := &sandbox.Interface{}
	intf.SrcName = name2
	intf.DstName = containerVethPrefix
	intf.Address = ipv4Addr

	if config.EnableIPv6 {
		intf.AddressIPv6 = ipv6Addr
	}

	// Store the interface in endpoint, this is needed for cleanup on DeleteEndpoint()
	endpoint.intf = intf

	err = epInfo.AddInterface(ifaceID, endpoint.macAddress, *ipv4Addr, *ipv6Addr)
	if err != nil {
		return err
	}

	// Program any required port mapping and store them in the endpoint
	endpoint.portMapping, err = allocatePorts(epConfig, intf, config.DefaultBindingIP, config.EnableUserlandProxy)
	if err != nil {
		return err
	}

	return nil
}