Exemple #1
0
// Fill calls fn with the available capacity remaining (capacity-fill) and
// fills the bucket with the number of tokens returned by fn. If the remaining
// capacity is 0, Fill returns 0, nil. If the remaining capacity is < 0, Fill
// returns 0, ErrBucketOverflow.
//
// If fn returns an error, it will be returned by Fill along with the remaining
// capacity.
//
// fn is provided the remaining capacity as a soft maximum, fn is allowed to
// use more than the remaining capacity without incurring spillage, though this
// will cause subsequent calls to Fill to return ErrBucketOverflow until the
// next drain.
//
// If the bucket is closed when Fill is called, fn will not be executed and
// Fill will return with an error.
func (b *Bucket) Fill(fn func(int64) (int64, error)) (int64, error) {
	if b.closed() {
		log.Errorf("trafficshape: fill on closed bucket")
		return 0, errFillClosedBucket
	}

	fill := atomic.LoadInt64(&b.fill)
	capacity := atomic.LoadInt64(&b.capacity)

	switch {
	case fill < capacity:
		log.Debugf("trafficshape: under capacity (%d/%d)", fill, capacity)

		n, err := fn(capacity - fill)
		fill = atomic.AddInt64(&b.fill, n)

		return n, err
	case fill > capacity:
		log.Debugf("trafficshape: bucket overflow (%d/%d)", fill, capacity)

		return 0, ErrBucketOverflow
	}

	log.Debugf("trafficshape: bucket full (%d/%d)", fill, capacity)
	return 0, nil
}
Exemple #2
0
func (p *Proxy) connect(req *http.Request) (*http.Response, net.Conn, error) {
	if p.proxyURL != nil {
		log.Debugf("martian: CONNECT with downstream proxy: %s", p.proxyURL.Host)

		conn, err := net.Dial("tcp", p.proxyURL.Host)
		if err != nil {
			return nil, nil, err
		}
		pbw := bufio.NewWriter(conn)
		pbr := bufio.NewReader(conn)

		req.Write(pbw)
		pbw.Flush()

		res, err := http.ReadResponse(pbr, req)
		if err != nil {
			return nil, nil, err
		}

		return res, conn, nil
	}

	log.Debugf("martian: CONNECT to host directly: %s", req.URL.Host)

	conn, err := net.Dial("tcp", req.URL.Host)
	if err != nil {
		return nil, nil, err
	}

	return proxyutil.NewResponse(200, nil, req), conn, nil
}
Exemple #3
0
// loop drains the fill at interval and returns when the bucket is closed.
func (b *Bucket) loop() {
	log.Debugf("trafficshape: started drain loop")
	defer log.Debugf("trafficshape: stopped drain loop")

	for {
		select {
		case t := <-b.t.C:
			atomic.StoreInt64(&b.fill, 0)
			log.Debugf("trafficshape: fill reset @ %s", t)
		case <-b.closec:
			log.Debugf("trafficshape: bucket closed")
			return
		}
	}
}
Exemple #4
0
func (p *Proxy) handleLoop(conn net.Conn) {
	p.conns.Add(1)
	defer p.conns.Done()
	defer conn.Close()

	s, err := newSession()
	if err != nil {
		log.Errorf("martian: failed to create session: %v", err)
		return
	}

	ctx, err := withSession(s)
	if err != nil {
		log.Errorf("martian: failed to create context: %v", err)
		return
	}

	brw := bufio.NewReadWriter(bufio.NewReader(conn), bufio.NewWriter(conn))

	for {
		deadline := time.Now().Add(p.timeout)
		conn.SetDeadline(deadline)

		if err := p.handle(ctx, conn, brw); isCloseable(err) {
			log.Debugf("martian: closing connection: %v", conn.RemoteAddr())
			return
		}
	}
}
Exemple #5
0
func (p *Proxy) roundTrip(ctx *Context, req *http.Request) (*http.Response, error) {
	if ctx.SkippingRoundTrip() {
		log.Debugf("martian: skipping round trip")
		return proxyutil.NewResponse(200, nil, req), nil
	}

	return p.roundTripper.RoundTrip(req)
}
Exemple #6
0
// Close stops the drain loop and marks the bucket as closed.
func (b *Bucket) Close() error {
	log.Debugf("trafficshape: closing bucket")

	b.t.Stop()
	close(b.closec)

	return nil
}
Exemple #7
0
// Close closes the read and write buckets along with the underlying listener.
func (l *Listener) Close() error {
	defer log.Debugf("trafficshape: closed read/write buckets and connection")

	l.rb.Close()
	l.wb.Close()

	return l.Listener.Close()
}
Exemple #8
0
// ServeHTTP configures latency and bandwidth constraints.
//
// The "latency" query string parameter accepts a duration string in any format
// supported by time.ParseDuration.
// The "up" and "down" query string parameters accept integers as bits per
// second to be used for read and write throughput.
func (h *Handler) ServeHTTP(rw http.ResponseWriter, req *http.Request) {
	log.Debugf("trafficshape: configuration request")

	latency := req.FormValue("latency")
	if latency != "" {
		d, err := time.ParseDuration(latency)
		if err != nil {
			log.Errorf("trafficshape: invalid latency parameter: %v", err)
			http.Error(rw, fmt.Sprintf("invalid duration: %s", latency), 400)
			return
		}

		h.l.SetLatency(d)
	}

	up := req.FormValue("up")
	if up != "" {
		br, err := strconv.ParseInt(up, 10, 64)
		if err != nil {
			log.Errorf("trafficshape: invalid up parameter: %v", err)
			http.Error(rw, fmt.Sprintf("invalid upstream: %s", up), 400)
			return
		}

		h.l.SetWriteBitrate(br)
	}

	down := req.FormValue("down")
	if down != "" {
		br, err := strconv.ParseInt(down, 10, 64)
		if err != nil {
			log.Errorf("trafficshape: invalid down parameter: %v", err)
			http.Error(rw, fmt.Sprintf("invalid downstream: %s", down), 400)
			return
		}

		h.l.SetReadBitrate(br)
	}

	log.Debugf("trafficshape: configured successfully")
}
Exemple #9
0
func (p *Proxy) roundTrip(ctx *session.Context, req *http.Request) (*http.Response, error) {
	if ctx.SkippingRoundTrip() {
		log.Debugf("martian: skipping round trip")
		return proxyutil.NewResponse(200, nil, req), nil
	}

	if tr, ok := p.roundTripper.(*http.Transport); ok {
		tr.Proxy = http.ProxyURL(p.proxyURL)
	}

	return p.roundTripper.RoundTrip(req)
}
Exemple #10
0
// Serve accepts connections from the listener and handles the requests.
func (p *Proxy) Serve(l net.Listener) error {
	defer l.Close()

	var delay time.Duration
	for {
		if p.Closing() {
			return nil
		}

		conn, err := l.Accept()
		if err != nil {
			if nerr, ok := err.(net.Error); ok && nerr.Temporary() {
				if delay == 0 {
					delay = 5 * time.Millisecond
				} else {
					delay *= 2
				}
				if max := time.Second; delay > max {
					delay = max
				}

				log.Debugf("martian: temporary error on accept: %v", err)
				time.Sleep(delay)
				continue
			}

			log.Errorf("martian: failed to accept: %v", err)
			return err
		}
		delay = 0
		log.Debugf("martian: accepted connection from %s", conn.RemoteAddr())

		if tconn, ok := conn.(*net.TCPConn); ok {
			tconn.SetKeepAlive(true)
			tconn.SetKeepAlivePeriod(3 * time.Minute)
		}

		go p.handleLoop(conn)
	}
}
Exemple #11
0
// FillThrottle calls fn with the available capacity remaining (capacity-fill)
// and fills the bucket with the number of tokens returned by fn. If the
// remaining capacity is <= 0, FillThrottle will wait for the next drain before
// running fn.
//
// If fn returns an error, it will be returned by FillThrottle along with the
// number of tokens processed by fn.
//
// fn is provided the remaining capacity as a soft maximum, fn is allowed to
// use more than the remaining capacity without incurring spillage.
//
// If the bucket is closed when FillThrottle is called, or while waiting for
// the next drain, fn will not be executed and FillThrottle will return with an
// error.
func (b *Bucket) FillThrottle(fn func(int64) (int64, error)) (int64, error) {
	for {
		if b.closed() {
			log.Errorf("trafficshape: fill on closed bucket")
			return 0, errFillClosedBucket
		}

		fill := atomic.LoadInt64(&b.fill)
		capacity := atomic.LoadInt64(&b.capacity)

		if fill < capacity {
			log.Debugf("trafficshape: under capacity (%d/%d)", fill, capacity)

			n, err := fn(capacity - fill)
			fill = atomic.AddInt64(&b.fill, n)

			return n, err
		}

		log.Debugf("trafficshape: bucket full (%d/%d)", fill, capacity)
	}
}
Exemple #12
0
// ReadFrom reads data from r until EOF or error, optionally simulating
// connection latency and throttling read throughput based on desired bandwidth
// constraints.
func (c *conn) ReadFrom(r io.Reader) (int64, error) {
	c.ronce.Do(c.sleepLatency)

	var total int64
	for {
		n, err := c.rb.FillThrottle(func(remaining int64) (int64, error) {
			return io.CopyN(c.Conn, r, remaining)
		})

		total += n

		if err == io.EOF {
			log.Debugf("trafficshape: exhausted reader successfully")
			return total, nil
		} else if err != nil {
			log.Errorf("trafficshape: failed copying from reader: %v", err)
			return total, err
		}
	}
}
Exemple #13
0
// Accept waits for and returns the next connection to the listener.
func (l *Listener) Accept() (net.Conn, error) {
	oc, err := l.Listener.Accept()
	if err != nil {
		log.Errorf("trafficshape: failed accepting connection: %v", err)
		return nil, err
	}

	if tconn, ok := oc.(*net.TCPConn); ok {
		log.Debugf("trafficshape: setting keep-alive for TCP connection")
		tconn.SetKeepAlive(true)
		tconn.SetKeepAlivePeriod(3 * time.Minute)
	}

	lc := &conn{
		Conn:    oc,
		latency: l.Latency(),
		rb:      l.rb,
		wb:      l.wb,
	}

	return lc, nil
}
Exemple #14
0
func (c *Config) cert(hostname string) (*tls.Certificate, error) {
	// Remove the port if it exists.
	host, _, err := net.SplitHostPort(hostname)
	if err == nil {
		hostname = host
	}

	c.certmu.RLock()
	tlsc, ok := c.certs[hostname]
	c.certmu.RUnlock()

	if ok {
		log.Debugf("mitm: cache hit for %s", hostname)

		// Check validity of the certificate for hostname match, expiry, etc. In
		// particular, if the cached certificate has expired, create a new one.
		if _, err := tlsc.Leaf.Verify(x509.VerifyOptions{
			DNSName: hostname,
			Roots:   c.roots,
		}); err == nil {
			return tlsc, nil
		}

		log.Debugf("mitm: invalid certificate in cache for %s", hostname)
	}

	log.Debugf("mitm: cache miss for %s", hostname)

	serial, err := rand.Int(rand.Reader, MaxSerialNumber)
	if err != nil {
		return nil, err
	}

	tmpl := &x509.Certificate{
		SerialNumber: serial,
		Subject: pkix.Name{
			CommonName:   hostname,
			Organization: []string{c.org},
		},
		SubjectKeyId:          c.keyID,
		KeyUsage:              x509.KeyUsageKeyEncipherment | x509.KeyUsageDigitalSignature,
		ExtKeyUsage:           []x509.ExtKeyUsage{x509.ExtKeyUsageServerAuth},
		BasicConstraintsValid: true,
		NotBefore:             time.Now().Add(-c.validity),
		NotAfter:              time.Now().Add(c.validity),
	}

	if ip := net.ParseIP(hostname); ip != nil {
		tmpl.IPAddresses = []net.IP{ip}
	} else {
		tmpl.DNSNames = []string{hostname}
	}

	raw, err := x509.CreateCertificate(rand.Reader, tmpl, c.ca, c.priv.Public(), c.capriv)
	if err != nil {
		return nil, err
	}

	// Parse certificate bytes so that we have a leaf certificate.
	x509c, err := x509.ParseCertificate(raw)
	if err != nil {
		return nil, err
	}

	tlsc = &tls.Certificate{
		Certificate: [][]byte{raw, c.ca.Raw},
		PrivateKey:  c.priv,
		Leaf:        x509c,
	}

	c.certmu.Lock()
	c.certs[hostname] = tlsc
	c.certmu.Unlock()

	return tlsc, nil
}
Exemple #15
0
// SetCapacity sets the capacity for the bucket and resets the fill to zero.
func (b *Bucket) SetCapacity(capacity int64) {
	log.Debugf("trafficshape: set capacity: %d", capacity)

	atomic.StoreInt64(&b.capacity, capacity)
	atomic.StoreInt64(&b.fill, 0)
}
Exemple #16
0
func (c *conn) sleepLatency() {
	log.Debugf("trafficshape: simulating latency: %s", c.latency)
	time.Sleep(c.latency)
}
Exemple #17
0
// ModifyResponse logs a debug line.
func (nm *noopModifier) ModifyResponse(*http.Response) error {
	log.Debugf("%s: no response modifier configured", nm.id)
	return nil
}
Exemple #18
0
// StartWithCertificate runs a proxy on addr and configures a cert for MITM
func StartWithCertificate(proxyAddr string, cert string, key string) (*Martian, error) {
	flag.Set("logtostderr", "true")

	signal.Ignore(syscall.SIGPIPE)

	l, err := net.Listen("tcp", proxyAddr)
	if err != nil {
		return nil, err
	}

	mlog.Debugf("mobileproxy: started listener: %v", l.Addr())

	p := martian.NewProxy()

	mux := http.NewServeMux()
	p.SetMux(mux)

	if cert != "" && key != "" {
		tlsc, err := tls.X509KeyPair([]byte(cert), []byte(key))
		if err != nil {
			log.Fatal(err)
		}

		mlog.Debugf("mobileproxy: loaded cert and key")

		x509c, err := x509.ParseCertificate(tlsc.Certificate[0])
		if err != nil {
			log.Fatal(err)
		}

		mlog.Debugf("mobileproxy: parsed cert")

		mc, err := mitm.NewConfig(x509c, tlsc.PrivateKey)
		if err != nil {
			log.Fatal(err)
		}

		mc.SetValidity(12 * time.Hour)
		mc.SetOrganization("Martian Proxy")

		p.SetMITM(mc)

		mux.Handle("martian.proxy/authority.cer", martianhttp.NewAuthorityHandler(x509c))
		mlog.Debugf("mobileproxy: install cert from http://martian.proxy/authority.cer")
	}

	stack, fg := httpspec.NewStack("martian.mobileproxy")
	p.SetRequestModifier(stack)
	p.SetResponseModifier(stack)

	// add HAR logger
	hl := har.NewLogger()
	stack.AddRequestModifier(hl)
	stack.AddResponseModifier(hl)

	m := martianhttp.NewModifier()
	fg.AddRequestModifier(m)
	fg.AddResponseModifier(m)

	mlog.Debugf("mobileproxy: set martianhttp modifier")

	// Proxy specific handlers.
	// These handlers take precendence over proxy traffic and will not be intercepted.

	// Retrieve HAR logs
	mux.Handle("martian.proxy/logs", har.NewExportHandler(hl))
	mux.Handle("martian.proxy/logs/reset", har.NewResetHandler(hl))

	// Update modifiers.
	mux.Handle("martian.proxy/configure", m)
	mlog.Debugf("mobileproxy: configure with requests to http://martian.proxy/configure")

	// Verify assertions.
	vh := verify.NewHandler()
	vh.SetRequestVerifier(m)
	vh.SetResponseVerifier(m)
	mux.Handle("martian.proxy/verify", vh)
	mlog.Debugf("mobileproxy: check verifications with requests to http://martian.proxy/verify")

	// Reset verifications.
	rh := verify.NewResetHandler()
	rh.SetRequestVerifier(m)
	rh.SetResponseVerifier(m)
	mux.Handle("martian.proxy/verify/reset", rh)
	mlog.Debugf("mobileproxy: reset verifications with requests to http://martian.proxy/verify/reset")

	go p.Serve(l)
	mlog.Infof("mobileproxy: started proxy on listener")

	return &Martian{
		proxy:    p,
		listener: l,
		mux:      mux,
	}, nil
}
Exemple #19
0
func (p *Proxy) handle(ctx *session.Context, conn net.Conn, brw *bufio.ReadWriter) error {
	log.Debugf("martian: waiting for request: %v", conn.RemoteAddr())

	req, err := http.ReadRequest(brw.Reader)
	if err != nil {
		if isCloseable(err) {
			log.Debugf("martian: connection closed prematurely: %v", err)
		} else {
			log.Errorf("martian: failed to read request: %v", err)
		}

		// TODO: TCPConn.WriteClose() to avoid sending an RST to the client.

		return errClose
	}
	defer req.Body.Close()

	if h, pattern := p.mux.Handler(req); pattern != "" {
		defer brw.Flush()

		closing := req.Close || p.Closing()

		log.Infof("martian: intercepted configuration request: %s", req.URL)
		rw := newResponseWriter(brw, closing)
		defer rw.Close()

		h.ServeHTTP(rw, req)

		// Call WriteHeader to ensure a response is sent, since the handler isn't
		// required to call WriteHeader/Write.
		rw.WriteHeader(200)

		if closing {
			return errClose
		}

		return nil
	}

	ctx, err = session.FromContext(ctx)
	if err != nil {
		log.Errorf("martian: failed to derive context: %v", err)
		return err
	}

	SetContext(req, ctx)
	defer RemoveContext(req)

	if tconn, ok := conn.(*tls.Conn); ok {
		ctx.GetSession().MarkSecure()

		cs := tconn.ConnectionState()
		req.TLS = &cs
	}

	req.URL.Scheme = "http"
	if ctx.GetSession().IsSecure() {
		log.Debugf("martian: forcing HTTPS inside secure session")
		req.URL.Scheme = "https"
	}

	req.RemoteAddr = conn.RemoteAddr().String()
	if req.URL.Host == "" {
		req.URL.Host = req.Host
	}

	log.Infof("martian: received request: %s", req.URL)

	if req.Method == "CONNECT" {
		if err := p.reqmod.ModifyRequest(req); err != nil {
			log.Errorf("martian: error modifying CONNECT request: %v", err)
			proxyutil.Warning(req.Header, err)
		}

		if p.mitm != nil {
			log.Debugf("martian: attempting MITM for connection: %s", req.Host)
			res := proxyutil.NewResponse(200, nil, req)

			if err := p.resmod.ModifyResponse(res); err != nil {
				log.Errorf("martian: error modifying CONNECT response: %v", err)
				proxyutil.Warning(res.Header, err)
			}

			res.Write(brw)
			brw.Flush()

			log.Debugf("martian: completed MITM for connection: %s", req.Host)

			tlsconn := tls.Server(conn, p.mitm.TLSForHost(req.Host))
			brw.Writer.Reset(tlsconn)
			brw.Reader.Reset(tlsconn)

			return p.handle(ctx, tlsconn, brw)
		}

		log.Debugf("martian: attempting to establish CONNECT tunnel: %s", req.URL.Host)
		res, cconn, cerr := p.connect(req)
		if cerr != nil {
			log.Errorf("martian: failed to CONNECT: %v", err)
			res = proxyutil.NewResponse(502, nil, req)
			proxyutil.Warning(res.Header, cerr)

			if err := p.resmod.ModifyResponse(res); err != nil {
				log.Errorf("martian: error modifying CONNECT response: %v", err)
				proxyutil.Warning(res.Header, err)
			}

			res.Write(brw)
			return brw.Flush()
		}
		defer res.Body.Close()
		defer cconn.Close()

		if err := p.resmod.ModifyResponse(res); err != nil {
			log.Errorf("martian: error modifying CONNECT response: %v", err)
			proxyutil.Warning(res.Header, err)
		}

		res.Write(brw)
		brw.Flush()

		cbw := bufio.NewWriter(cconn)
		cbr := bufio.NewReader(cconn)
		defer cbw.Flush()

		copySync := func(w io.Writer, r io.Reader, donec chan<- bool) {
			io.Copy(w, r)
			donec <- true
		}

		donec := make(chan bool, 2)
		go copySync(cbw, brw, donec)
		go copySync(brw, cbr, donec)

		log.Debugf("martian: established CONNECT tunnel, proxying traffic")
		<-donec
		<-donec
		log.Debugf("martian: closed CONNECT tunnel")

		return errClose
	}

	if err := p.reqmod.ModifyRequest(req); err != nil {
		log.Errorf("martian: error modifying request: %v", err)
		proxyutil.Warning(req.Header, err)
	}

	res, err := p.roundTrip(ctx, req)
	if err != nil {
		log.Errorf("martian: failed to round trip: %v", err)
		res = proxyutil.NewResponse(502, nil, req)
		proxyutil.Warning(res.Header, err)
	}
	defer res.Body.Close()

	if err := p.resmod.ModifyResponse(res); err != nil {
		log.Errorf("martian: error modifying response: %v", err)
		proxyutil.Warning(res.Header, err)
	}

	var closing error
	if req.Close || p.Closing() {
		log.Debugf("martian: received close request: %v", req.RemoteAddr)
		res.Header.Add("Connection", "close")
		closing = errClose
	}

	log.Debugf("martian: sent response: %v", req.URL)
	res.Write(brw)
	brw.Flush()

	return closing
}
Exemple #20
0
func (p *Proxy) handle(ctx *Context, conn net.Conn, brw *bufio.ReadWriter) error {
	log.Debugf("martian: waiting for request: %v", conn.RemoteAddr())

	req, err := http.ReadRequest(brw.Reader)
	if err != nil {
		if isCloseable(err) {
			log.Debugf("martian: connection closed prematurely: %v", err)
		} else {
			log.Errorf("martian: failed to read request: %v", err)
		}

		// TODO: TCPConn.WriteClose() to avoid sending an RST to the client.

		return errClose
	}
	defer req.Body.Close()

	if h, pattern := p.mux.Handler(req); pattern != "" {
		defer brw.Flush()

		closing := req.Close || p.Closing()

		log.Infof("martian: intercepted configuration request: %s", req.URL)
		rw := newResponseWriter(brw, closing)
		defer rw.Close()

		h.ServeHTTP(rw, req)

		// Call WriteHeader to ensure a response is sent, since the handler isn't
		// required to call WriteHeader/Write.
		rw.WriteHeader(200)

		if closing {
			return errClose
		}

		return nil
	}

	ctx, err = withSession(ctx.Session())
	if err != nil {
		log.Errorf("martian: failed to build new context: %v", err)
		return err
	}

	link(req, ctx)
	defer unlink(req)

	if tconn, ok := conn.(*tls.Conn); ok {
		ctx.Session().MarkSecure()

		cs := tconn.ConnectionState()
		req.TLS = &cs
	}

	req.URL.Scheme = "http"
	if ctx.Session().IsSecure() {
		log.Debugf("martian: forcing HTTPS inside secure session")
		req.URL.Scheme = "https"
	}

	req.RemoteAddr = conn.RemoteAddr().String()
	if req.URL.Host == "" {
		req.URL.Host = req.Host
	}

	log.Infof("martian: received request: %s", req.URL)

	if req.Method == "CONNECT" {
		if err := p.reqmod.ModifyRequest(req); err != nil {
			log.Errorf("martian: error modifying CONNECT request: %v", err)
			proxyutil.Warning(req.Header, err)
		}

		if p.mitm != nil {
			log.Debugf("martian: attempting MITM for connection: %s", req.Host)
			res := proxyutil.NewResponse(200, nil, req)

			if err := p.resmod.ModifyResponse(res); err != nil {
				log.Errorf("martian: error modifying CONNECT response: %v", err)
				proxyutil.Warning(res.Header, err)
			}

			if err := res.Write(brw); err != nil {
				log.Errorf("martian: got error while writing response back to client: %v", err)
			}
			if err := brw.Flush(); err != nil {
				log.Errorf("martian: got error while flushing response back to client: %v", err)
			}

			log.Debugf("martian: completed MITM for connection: %s", req.Host)

			b := make([]byte, 1)
			if _, err := brw.Read(b); err != nil {
				log.Errorf("martian: error peeking message through CONNECT tunnel to determine type: %v", err)
			}

			// Drain all of the rest of the buffered data.
			buf := make([]byte, brw.Reader.Buffered())
			brw.Read(buf)

			// 22 is the TLS handshake.
			// https://tools.ietf.org/html/rfc5246#section-6.2.1
			if b[0] == 22 {
				// Prepend the previously read data to be read again by
				// http.ReadRequest.
				tlsconn := tls.Server(&peekedConn{conn, io.MultiReader(bytes.NewReader(b), bytes.NewReader(buf), conn)}, p.mitm.TLSForHost(req.Host))

				if err := tlsconn.Handshake(); err != nil {
					p.mitm.HandshakeErrorCallback(req, err)
					return err
				}

				brw.Writer.Reset(tlsconn)
				brw.Reader.Reset(tlsconn)

				return p.handle(ctx, tlsconn, brw)
			}

			// Prepend the previously read data to be read again by http.ReadRequest.
			brw.Reader.Reset(io.MultiReader(bytes.NewReader(b), bytes.NewReader(buf), conn))
			return p.handle(ctx, conn, brw)
		}

		log.Debugf("martian: attempting to establish CONNECT tunnel: %s", req.URL.Host)
		res, cconn, cerr := p.connect(req)
		if cerr != nil {
			log.Errorf("martian: failed to CONNECT: %v", err)
			res = proxyutil.NewResponse(502, nil, req)
			proxyutil.Warning(res.Header, cerr)

			if err := p.resmod.ModifyResponse(res); err != nil {
				log.Errorf("martian: error modifying CONNECT response: %v", err)
				proxyutil.Warning(res.Header, err)
			}

			if err := res.Write(brw); err != nil {
				log.Errorf("martian: got error while writing response back to client: %v", err)
			}
			err := brw.Flush()
			if err != nil {
				log.Errorf("martian: got error while flushing response back to client: %v", err)
			}
			return err
		}
		defer res.Body.Close()
		defer cconn.Close()

		if err := p.resmod.ModifyResponse(res); err != nil {
			log.Errorf("martian: error modifying CONNECT response: %v", err)
			proxyutil.Warning(res.Header, err)
		}

		if err := res.Write(brw); err != nil {
			log.Errorf("martian: got error while writing response back to client: %v", err)
		}
		if err := brw.Flush(); err != nil {
			log.Errorf("martian: got error while flushing response back to client: %v", err)
		}

		cbw := bufio.NewWriter(cconn)
		cbr := bufio.NewReader(cconn)
		defer cbw.Flush()

		copySync := func(w io.Writer, r io.Reader, donec chan<- bool) {
			if _, err := io.Copy(w, r); err != nil && err != io.EOF {
				log.Errorf("martian: failed to copy CONNECT tunnel: %v", err)
			}

			log.Debugf("martian: CONNECT tunnel finished copying")
			donec <- true
		}

		donec := make(chan bool, 2)
		go copySync(cbw, brw, donec)
		go copySync(brw, cbr, donec)

		log.Debugf("martian: established CONNECT tunnel, proxying traffic")
		<-donec
		<-donec
		log.Debugf("martian: closed CONNECT tunnel")

		return errClose
	}

	if err := p.reqmod.ModifyRequest(req); err != nil {
		log.Errorf("martian: error modifying request: %v", err)
		proxyutil.Warning(req.Header, err)
	}

	res, err := p.roundTrip(ctx, req)
	if err != nil {
		log.Errorf("martian: failed to round trip: %v", err)
		res = proxyutil.NewResponse(502, nil, req)
		proxyutil.Warning(res.Header, err)
	}
	defer res.Body.Close()

	if err := p.resmod.ModifyResponse(res); err != nil {
		log.Errorf("martian: error modifying response: %v", err)
		proxyutil.Warning(res.Header, err)
	}

	var closing error
	if req.Close || res.Close || p.Closing() {
		log.Debugf("martian: received close request: %v", req.RemoteAddr)
		res.Close = true
		closing = errClose
	}

	log.Debugf("martian: sent response: %v", req.URL)
	if err := res.Write(brw); err != nil {
		log.Errorf("martian: got error while writing response back to client: %v", err)
	}
	if err := brw.Flush(); err != nil {
		log.Errorf("martian: got error while flushing response back to client: %v", err)
	}

	return closing
}
Exemple #21
0
// ModifyRequest adds cookie to the request.
func (m *modifier) ModifyRequest(req *http.Request) error {
	req.AddCookie(m.cookie)
	log.Debugf("cookie: %s: append request cookie: %s", req.URL, m.cookie)

	return nil
}
Exemple #22
0
// ModifyResponse sets cookie on the response.
func (m *modifier) ModifyResponse(res *http.Response) error {
	res.Header.Add("Set-Cookie", m.cookie.String())
	log.Debugf("cookie: %s: append response cookie: %s", res.Request.URL, m.cookie)

	return nil
}
Exemple #23
0
// ModifyRequest logs a debug line.
func (nm *noopModifier) ModifyRequest(*http.Request) error {
	log.Debugf("%s: no request modifier configured", nm.id)
	return nil
}