// Run runs the specified ProxyServer. This should never exit.
func (s *ProxyServer) Run(_ []string) error {
if err := util.ApplyOomScoreAdj(0, s.OOMScoreAdj); err != nil {
glog.Info(err)
}
serviceConfig := config.NewServiceConfig()
endpointsConfig := config.NewEndpointsConfig()
protocol := iptables.ProtocolIpv4
if net.IP(s.BindAddress).To4() == nil {
protocol = iptables.ProtocolIpv6
}
loadBalancer := proxy.NewLoadBalancerRR()
proxier := proxy.NewProxier(loadBalancer, net.IP(s.BindAddress), iptables.New(exec.New(), protocol))
if proxier == nil {
glog.Fatalf("failed to create proxier, aborting")
}
// Wire proxier to handle changes to services
serviceConfig.RegisterHandler(proxier)
// And wire loadBalancer to handle changes to endpoints to services
endpointsConfig.RegisterHandler(loadBalancer)
// Note: RegisterHandler() calls need to happen before creation of Sources because sources
// only notify on changes, and the initial update (on process start) may be lost if no handlers
// are registered yet.
// define api config source
if s.ClientConfig.Host != "" {
glog.Infof("Using API calls to get config %v", s.ClientConfig.Host)
client, err := client.New(&s.ClientConfig)
if err != nil {
glog.Fatalf("Invalid API configuration: %v", err)
}
config.NewSourceAPI(
client.Services(api.NamespaceAll),
client.Endpoints(api.NamespaceAll),
30*time.Second,
serviceConfig.Channel("api"),
endpointsConfig.Channel("api"),
)
}
if s.HealthzPort > 0 {
go util.Forever(func() {
err := http.ListenAndServe(s.BindAddress.String()+":"+strconv.Itoa(s.HealthzPort), nil)
if err != nil {
glog.Errorf("Starting health server failed: %v", err)
}
}, 5*time.Second)
}
// Just loop forever for now...
proxier.SyncLoop()
return nil
}
// RunProxy starts the proxy
func (c *NodeConfig) RunProxy() {
// initialize kube proxy
serviceConfig := pconfig.NewServiceConfig()
endpointsConfig := pconfig.NewEndpointsConfig()
loadBalancer := proxy.NewLoadBalancerRR()
endpointsConfig.RegisterHandler(loadBalancer)
host, _, err := net.SplitHostPort(c.BindAddress)
if err != nil {
glog.Fatalf("The provided value to bind to must be an ip:port %q", c.BindAddress)
}
ip := net.ParseIP(host)
if ip == nil {
glog.Fatalf("The provided value to bind to must be an ip:port: %q", c.BindAddress)
}
protocol := iptables.ProtocolIpv4
if ip.To4() == nil {
protocol = iptables.ProtocolIpv6
}
go util.Forever(func() {
proxier, err := proxy.NewProxier(loadBalancer, ip, iptables.New(kexec.New(), protocol), util.PortRange{})
if err != nil {
switch {
// conflicting use of iptables, retry
case proxy.IsProxyLocked(err):
glog.Errorf("Unable to start proxy, will retry: %v", err)
return
// on a system without iptables
case strings.Contains(err.Error(), "executable file not found in path"):
glog.V(4).Infof("kube-proxy initialization error: %v", err)
glog.Warningf("WARNING: Could not find the iptables command. The service proxy requires iptables and will be disabled.")
case err == proxy.ErrProxyOnLocalhost:
glog.Warningf("WARNING: The service proxy cannot bind to localhost and will be disabled.")
case strings.Contains(err.Error(), "you must be root"):
glog.Warningf("WARNING: Could not modify iptables. You must run this process as root to use the service proxy.")
default:
glog.Warningf("WARNING: Could not modify iptables. You must run this process as root to use the service proxy: %v", err)
}
select {}
}
pconfig.NewSourceAPI(
c.Client.Services(kapi.NamespaceAll),
c.Client.Endpoints(kapi.NamespaceAll),
30*time.Second,
serviceConfig.Channel("api"),
endpointsConfig.Channel("api"))
serviceConfig.RegisterHandler(proxier)
glog.Infof("Started Kubernetes Proxy on %s", host)
select {}
}, 5*time.Second)
}
func main() {
flag.Parse()
util.InitLogs()
defer util.FlushLogs()
verflag.PrintAndExitIfRequested()
serviceConfig := config.NewServiceConfig()
endpointsConfig := config.NewEndpointsConfig()
// define api config source
if *master != "" {
glog.Infof("Using api calls to get config %v", *master)
//TODO: add auth info
client, err := client.New(*master, nil)
if err != nil {
glog.Fatalf("Invalid -master: %v", err)
}
config.NewSourceAPI(
client,
30*time.Second,
serviceConfig.Channel("api"),
endpointsConfig.Channel("api"),
)
}
// Create a configuration source that handles configuration from etcd.
if len(etcdServerList) > 0 && *master == "" {
glog.Infof("Using etcd servers %v", etcdServerList)
// Set up logger for etcd client
etcd.SetLogger(util.NewLogger("etcd "))
etcdClient := etcd.NewClient(etcdServerList)
config.NewConfigSourceEtcd(etcdClient,
serviceConfig.Channel("etcd"),
endpointsConfig.Channel("etcd"))
}
// And create a configuration source that reads from a local file
config.NewConfigSourceFile(*configFile,
serviceConfig.Channel("file"),
endpointsConfig.Channel("file"))
glog.Infof("Using configuration file %s", *configFile)
loadBalancer := proxy.NewLoadBalancerRR()
proxier := proxy.NewProxier(loadBalancer)
// Wire proxier to handle changes to services
serviceConfig.RegisterHandler(proxier)
// And wire loadBalancer to handle changes to endpoints to services
endpointsConfig.RegisterHandler(loadBalancer)
// Just loop forever for now...
select {}
}
func main() {
client.BindClientConfigFlags(flag.CommandLine, clientConfig)
flag.Set("logtostderr", "true")
flag.Parse()
cmd := exec.Command("haproxy", "-f", configPath, "-p", "/var/run/haproxy.pid")
cmd.Stdout = os.Stdout
cmd.Stderr = os.Stderr
err := cmd.Run()
if err != nil {
if o, err := cmd.CombinedOutput(); err != nil {
glog.Error(string(o))
}
glog.Fatalf("haproxy process died, : %v", err)
}
glog.Info("started haproxy")
clientConfig.TLSClientConfig = loadTLSConfigOrDie()
//clientConfig.Version = "v1beta3"
clientConfig.Version = "v1"
kubeClient, err := client.New(clientConfig)
if err != nil {
glog.Fatalf("Invalid API configuration: %v", err)
}
cu := configUpdater{
make([]api.Endpoints, 0),
make([]api.Service, 0),
make(chan []api.Endpoints),
make(chan []api.Service),
template.Must(template.ParseFiles(templatePath)),
make(chan struct{}, 1),
}
endpointsConfig := config.NewEndpointsConfig()
serviceConfig := config.NewServiceConfig()
endpointsConfig.RegisterHandler(cu.eu)
serviceConfig.RegisterHandler(cu.su)
config.NewSourceAPI(
kubeClient.Services(api.NamespaceAll),
kubeClient.Endpoints(api.NamespaceAll),
30*time.Second,
serviceConfig.Channel("api"),
endpointsConfig.Channel("api"),
)
glog.Info("started watch")
go util.Forever(cu.reloadLoop, 1*time.Second)
util.Forever(cu.syncLoop, 1*time.Second)
}
func NewKubernetesWatcher(kr *KubernetesRegistry) *KubernetesWatcher {
serviceConfig := config.NewServiceConfig()
endpointsConfig := config.NewEndpointsConfig()
config.NewSourceAPI(
kr.Client.Services(api.NamespaceAll),
kr.Client.Endpoints(api.NamespaceAll),
time.Second*10,
serviceConfig.Channel("api"),
endpointsConfig.Channel("api"),
)
ks := &KubernetesWatcher{
Registry: kr,
}
serviceConfig.RegisterHandler(ks)
return ks
}
func WatchKubernetes(nclient *nginxProxy, filter func(map[string]string) bool) {
c, err := newClient()
if err != nil {
panic(err.Error())
}
serviceConfig := config.NewServiceConfig()
endpointsConfig := config.NewEndpointsConfig()
config.NewSourceAPI(
c.Services(api.NamespaceAll),
c.Endpoints(api.NamespaceAll),
syncInterval,
serviceConfig.Channel("api"),
endpointsConfig.Channel("api"),
)
ks := NewKubernetesSync(nclient, filter)
// Wire skydns to handle changes to services
serviceConfig.RegisterHandler(ks)
}
func WatchKubernetes(eclient *etcd.Client) {
serviceConfig := pconfig.NewServiceConfig()
endpointsConfig := pconfig.NewEndpointsConfig()
if clientConfig.Host != "" {
log.Printf("using api calls to get Kubernetes config %v\n", clientConfig.Host)
client, err := client.New(clientConfig)
if err != nil {
log.Fatalf("Kubernetes requested, but received invalid API configuration: %v", err)
}
pconfig.NewSourceAPI(
client.Services(api.NamespaceAll),
client.Endpoints(api.NamespaceAll),
syncInterval,
serviceConfig.Channel("api"),
endpointsConfig.Channel("api"),
)
}
ks := NewKubernetesSync(eclient)
// Wire skydns to handle changes to services
serviceConfig.RegisterHandler(ks)
}
func main() {
flag.Parse()
util.InitLogs()
defer util.FlushLogs()
verflag.PrintAndExitIfRequested()
serviceConfig := config.NewServiceConfig()
endpointsConfig := config.NewEndpointsConfig()
// define api config source
if clientConfig.Host != "" {
glog.Infof("Using api calls to get config %v", clientConfig.Host)
client, err := client.New(clientConfig)
if err != nil {
glog.Fatalf("Invalid API configuration: %v", err)
}
config.NewSourceAPI(
client.Services(api.NamespaceAll),
client.Endpoints(api.NamespaceAll),
30*time.Second,
serviceConfig.Channel("api"),
endpointsConfig.Channel("api"),
)
} else {
var etcdClient *etcd.Client
// Set up etcd client
if len(etcdServerList) > 0 {
// Set up logger for etcd client
etcd.SetLogger(util.NewLogger("etcd "))
etcdClient = etcd.NewClient(etcdServerList)
} else if *etcdConfigFile != "" {
// Set up logger for etcd client
etcd.SetLogger(util.NewLogger("etcd "))
var err error
etcdClient, err = etcd.NewClientFromFile(*etcdConfigFile)
if err != nil {
glog.Fatalf("Error with etcd config file: %v", err)
}
}
// Create a configuration source that handles configuration from etcd.
if etcdClient != nil {
glog.Infof("Using etcd servers %v", etcdClient.GetCluster())
config.NewConfigSourceEtcd(etcdClient,
serviceConfig.Channel("etcd"),
endpointsConfig.Channel("etcd"))
}
}
loadBalancer := proxy.NewLoadBalancerRR()
proxier := proxy.NewProxier(loadBalancer, net.IP(bindAddress), iptables.New(exec.New()))
// Wire proxier to handle changes to services
serviceConfig.RegisterHandler(proxier)
// And wire loadBalancer to handle changes to endpoints to services
endpointsConfig.RegisterHandler(loadBalancer)
// Just loop forever for now...
proxier.SyncLoop()
}
func main() {
util.InitFlags()
util.InitLogs()
defer util.FlushLogs()
if err := util.ApplyOomScoreAdj(*oomScoreAdj); err != nil {
glog.Info(err)
}
verflag.PrintAndExitIfRequested()
serviceConfig := config.NewServiceConfig()
endpointsConfig := config.NewEndpointsConfig()
protocol := iptables.ProtocolIpv4
if net.IP(bindAddress).To4() == nil {
protocol = iptables.ProtocolIpv6
}
loadBalancer := proxy.NewLoadBalancerRR()
proxier := proxy.NewProxier(loadBalancer, net.IP(bindAddress), iptables.New(exec.New(), protocol))
if proxier == nil {
glog.Fatalf("failed to create proxier, aborting")
}
// Wire proxier to handle changes to services
serviceConfig.RegisterHandler(proxier)
// And wire loadBalancer to handle changes to endpoints to services
endpointsConfig.RegisterHandler(loadBalancer)
// Note: RegisterHandler() calls need to happen before creation of Sources because sources
// only notify on changes, and the initial update (on process start) may be lost if no handlers
// are registered yet.
// define api config source
if clientConfig.Host != "" {
glog.Infof("Using api calls to get config %v", clientConfig.Host)
client, err := client.New(clientConfig)
if err != nil {
glog.Fatalf("Invalid API configuration: %v", err)
}
config.NewSourceAPI(
client.Services(api.NamespaceAll),
client.Endpoints(api.NamespaceAll),
30*time.Second,
serviceConfig.Channel("api"),
endpointsConfig.Channel("api"),
)
} else {
var etcdClient *etcd.Client
// Set up etcd client
if len(etcdServerList) > 0 {
// Set up logger for etcd client
etcd.SetLogger(util.NewLogger("etcd "))
etcdClient = etcd.NewClient(etcdServerList)
} else if *etcdConfigFile != "" {
// Set up logger for etcd client
etcd.SetLogger(util.NewLogger("etcd "))
var err error
etcdClient, err = etcd.NewClientFromFile(*etcdConfigFile)
if err != nil {
glog.Fatalf("Error with etcd config file: %v", err)
}
}
// Create a configuration source that handles configuration from etcd.
if etcdClient != nil {
glog.Infof("Using etcd servers %v", etcdClient.GetCluster())
config.NewConfigSourceEtcd(etcdClient,
serviceConfig.Channel("etcd"),
endpointsConfig.Channel("etcd"))
}
}
if *healthz_port > 0 {
go util.Forever(func() {
err := http.ListenAndServe(bindAddress.String()+":"+strconv.Itoa(*healthz_port), nil)
if err != nil {
glog.Errorf("Starting health server failed: %v", err)
}
}, 5*time.Second)
}
// Just loop forever for now...
proxier.SyncLoop()
}
// Run runs the specified ProxyServer. This should never exit.
func (s *ProxyServer) Run(_ []string) error {
// TODO(vmarmol): Use container config for this.
if err := util.ApplyOomScoreAdj(0, s.OOMScoreAdj); err != nil {
glog.Info(err)
}
// Run in its own container.
if err := util.RunInResourceContainer(s.ResourceContainer); err != nil {
glog.Warningf("Failed to start in resource-only container %q: %v", s.ResourceContainer, err)
} else {
glog.Infof("Running in resource-only container %q", s.ResourceContainer)
}
serviceConfig := config.NewServiceConfig()
endpointsConfig := config.NewEndpointsConfig()
protocol := iptables.ProtocolIpv4
if net.IP(s.BindAddress).To4() == nil {
protocol = iptables.ProtocolIpv6
}
loadBalancer := proxy.NewLoadBalancerRR()
proxier := proxy.NewProxier(loadBalancer, net.IP(s.BindAddress), iptables.New(exec.New(), protocol))
if proxier == nil {
glog.Fatalf("failed to create proxier, aborting")
}
// Wire proxier to handle changes to services
serviceConfig.RegisterHandler(proxier)
// And wire loadBalancer to handle changes to endpoints to services
endpointsConfig.RegisterHandler(loadBalancer)
// Note: RegisterHandler() calls need to happen before creation of Sources because sources
// only notify on changes, and the initial update (on process start) may be lost if no handlers
// are registered yet.
// define api config source
if s.Kubeconfig == "" && s.Master == "" {
glog.Warningf("Neither --kubeconfig nor --master was specified. Using default API client. This might not work.")
}
// This creates a client, first loading any specified kubeconfig
// file, and then overriding the Master flag, if non-empty.
kubeconfig, err := clientcmd.NewNonInteractiveDeferredLoadingClientConfig(
&clientcmd.ClientConfigLoadingRules{ExplicitPath: s.Kubeconfig},
&clientcmd.ConfigOverrides{ClusterInfo: clientcmdapi.Cluster{Server: s.Master}}).ClientConfig()
if err != nil {
return err
}
client, err := client.New(kubeconfig)
if err != nil {
glog.Fatalf("Invalid API configuration: %v", err)
}
config.NewSourceAPI(
client.Services(api.NamespaceAll),
client.Endpoints(api.NamespaceAll),
30*time.Second,
serviceConfig.Channel("api"),
endpointsConfig.Channel("api"),
)
if s.HealthzPort > 0 {
go util.Forever(func() {
err := http.ListenAndServe(s.HealthzBindAddress.String()+":"+strconv.Itoa(s.HealthzPort), nil)
if err != nil {
glog.Errorf("Starting health server failed: %v", err)
}
}, 5*time.Second)
}
// Just loop forever for now...
proxier.SyncLoop()
return nil
}