func main() {
	gbot := gobot.NewGobot()

	firmataAdaptor := firmata.NewFirmataAdaptor("firmata", "/dev/ttyACM0")
	servo1 := gpio.NewServoDriver(firmataAdaptor, "servo", "5")
	servo2 := gpio.NewServoDriver(firmataAdaptor, "servo", "3")

	leapAdaptor := leap.NewLeapMotionAdaptor("leap", "127.0.0.1:6437")
	leapDriver := leap.NewLeapMotionDriver(leapAdaptor, "leap")

	work := func() {
		x := 90.0
		z := 90.0
		gobot.On(leapDriver.Events["Message"], func(data interface{}) {
			if len(data.(leap.Frame).Hands) > 0 {
				hand := data.(leap.Frame).Hands[0]
				x = gobot.ToScale(gobot.FromScale(hand.X(), -300, 300), 30, 150)
				z = gobot.ToScale(gobot.FromScale(hand.Z(), -300, 300), 30, 150)
			}
		})
		gobot.Every(10*time.Millisecond, func() {
			servo1.Move(uint8(x))
			servo2.Move(uint8(z))
			fmt.Println("Current Angle: ", servo1.CurrentAngle, ",", servo2.CurrentAngle)
		})
	}

	gbot.Robots = append(gbot.Robots,
		gobot.NewRobot("pwmBot", []gobot.Connection{firmataAdaptor, leapAdaptor}, []gobot.Device{servo1, servo2, leapDriver}, work))
	gbot.Start()
}
func (m *Motion) moveCam(p *rocproto.Packet) error {

	if p.Cam == nil {
		return errors.New(fmt.Sprintf("Mouvement error: moving camera ==>	%v", p))
	}
	x := uint8(gobot.ToScale(gobot.FromScale(p.Cam.X, -90, 90), 0, 180))
	y := uint8(gobot.ToScale(gobot.FromScale(p.Cam.Y, -35, 35), 90, 180))
	m.X = float64(x)
	m.Y = float64(y)
	m.servoX.Move(x)
	m.servoY.Move(y)
	return m.getCamPos(p)
}
func main() {
	gbot := gobot.NewGobot()

	firmataAdaptor := firmata.NewFirmataAdaptor("firmata", "/dev/ttyACM0")
	sensor := gpio.NewAnalogSensorDriver(firmataAdaptor, "sensor", "0")
	led := gpio.NewLedDriver(firmataAdaptor, "led", "3")

	work := func() {
		sensor.On(gpio.Data, func(data interface{}) {
			brightness := uint8(
				gobot.ToScale(gobot.FromScale(float64(data.(int)), 0, 1024), 0, 255),
			)
			fmt.Println("sensor", data)
			fmt.Println("brightness", brightness)
			led.Brightness(brightness)
		})
	}

	robot := gobot.NewRobot("sensorBot",
		[]gobot.Connection{firmataAdaptor},
		[]gobot.Device{sensor, led},
		work,
	)

	gbot.AddRobot(robot)

	gbot.Start()
}
Exemple #4
0
func main() {
	gbot := gobot.NewGobot()

	edisonAdaptor := edison.NewEdisonAdaptor("edison")
	blinkm := i2c.NewBlinkMDriver(edisonAdaptor, "blinkm")
	sensor := gpio.NewAnalogSensorDriver(edisonAdaptor, "sensor", "2")

	work := func() {
		gobot.On(sensor.Event("data"), func(data interface{}) {
			brightness := uint8(
				gobot.ToScale(gobot.FromScale(float64(data.(int)), 0, 4096), 0, 255),
			)
			fmt.Println("sensor", data)
			fmt.Println("brightness", brightness)
			blinkm.Rgb(0, brightness, 0)
		})
	}

	robot := gobot.NewRobot("sensorBot",
		[]gobot.Connection{edisonAdaptor},
		[]gobot.Device{blinkm, sensor},
		work,
	)

	gbot.AddRobot(robot)

	gbot.Start()
}
func main() {
	gbot := gobot.NewGobot()

	e := edison.NewEdisonAdaptor("edison")
	sensor := gpio.NewAnalogSensorDriver(e, "sensor", "0")
	led := gpio.NewLedDriver(e, "led", "3")

	work := func() {
		sensor.On(gpio.Data, func(data interface{}) {
			brightness := uint8(
				gobot.ToScale(gobot.FromScale(float64(data.(int)), 0, 4096), 0, 255),
			)
			fmt.Println("sensor", data)
			fmt.Println("brightness", brightness)
			led.Brightness(brightness)
		})
	}

	robot := gobot.NewRobot("sensorBot",
		[]gobot.Connection{e},
		[]gobot.Device{sensor, led},
		work,
	)

	gbot.AddRobot(robot)

	gbot.Start()
}
func main() {
	gbot := gobot.NewGobot()

	beagleboneAdaptor := beaglebone.NewBeagleboneAdaptor("beaglebone")
	sensor := gpio.NewAnalogSensorDriver(beagleboneAdaptor, "sensor", "P9_33")
	led := gpio.NewLedDriver(beagleboneAdaptor, "led", "P9_14")

	work := func() {
		sensor.On(sensor.Event("data"), func(data interface{}) {
			brightness := uint8(
				gobot.ToScale(gobot.FromScale(float64(data.(int)), 0, 1024), 0, 255),
			)
			fmt.Println("sensor", data)
			fmt.Println("brightness", brightness)
			led.Brightness(brightness)
		})
	}

	robot := gobot.NewRobot("sensorBot",
		[]gobot.Connection{beagleboneAdaptor},
		[]gobot.Device{sensor, led},
		work,
	)

	gbot.AddRobot(robot)

	gbot.Start()
}
Exemple #7
0
func (r *RaspiAdaptor) ServoWrite(pin string, angle byte) (err error) {
	sysfsPin, err := r.pwmPin(pin)
	if err != nil {
		return err
	}

	val := (gobot.ToScale(gobot.FromScale(float64(angle), 0, 180), 0, 200) / 1000.0) + 0.05

	return r.piBlaster(fmt.Sprintf("%v=%v\n", sysfsPin, val))
}
func (m *Motion) move(p *rocproto.Packet) error {

	var r int64 = 50

	if p.Mv == nil {
		return errors.New(fmt.Sprintf("Mouvement error, using motors ==>	%v", p))
	}
	theta := int64(p.Mv.Angle * 180 / math.Pi)
	theta = ((theta + 180) % 360) - 180
	v_a := r * (45 - theta%90) / 45        // falloff of main motor
	v_b := misc.Min(100, 2*r+v_a, 2*r-v_a) // compensation of other motor
	lR, rR := thrust(theta, v_a, v_b)
	lS := gobot.ToScale(gobot.FromScale(CALCSPEED*(float64(lR)/100), -90, 90), 0, 180)
	rS := gobot.ToScale(gobot.FromScale(CALCSPEED*(float64(rR)/100), -90, 90), 0, 180)
	p.Mv.Speed = float64(lR+rR) / 2
	gobot.Publish(m.Event("move"), *p.Mv)
	m.resetTime <- true
	m.motorL.Move(uint8(lS))
	m.motorR.Move(uint8(90 - (rS - 90)))
	fmt.Println(lS, 90-(rS-90))
	return nil
}
Exemple #9
0
/*
This function is used if only the rotary port is in play.
func mapValueToColor(i int) (int, int, int) {
	// Masking to account for very sensitive rotary
	red := ((i & (1 << 1)) << 2) | ((i & (1 << 4)) << 0) | ((i & (1 << 7)) >> 2)
	green := ((i & (1 << 2)) << 1) | ((i & (1 << 5)) >> 1) | ((i & (1 << 8)) >> 3)
	blue := ((i & (1 << 3)) << 0) | ((i & (1 << 6)) >> 2) | ((i & (1 << 9)) >> 4)

	return red, green, blue
}
*/
func main() {
	gbot := gobot.NewGobot()

	board := edison.NewEdisonAdaptor("edison")
	screen := i2c.NewGroveLcdDriver(board, "screen")
	sensorRotary := gpio.NewGroveRotaryDriver(board, "sensor", "0")
	sensorLight := gpio.NewGroveLightSensorDriver(board, "light", "1")
	sensorTemp := gpio.NewGroveTemperatureSensorDriver(board, "temp", "2")

	work := func() {
		var r, g, b int

		gobot.On(sensorRotary.Event("data"), func(data interface{}) {
			r = data.(int) >> 2
		})

		gobot.On(sensorLight.Event("data"), func(data interface{}) {
			fmt.Printf("%d\n", data)
			g = data.(int) * 255 / 790
		})

		gobot.Every(time.Millisecond*500, func() {
			b = int(gobot.ToScale(gobot.FromScale(sensorTemp.Temperature(), 25, 35), 0, 255))
			screen.Clear()
			screen.Home()
			screen.SetRGB(r, g, b)
			screen.Write(fmt.Sprintf("#%02X%02X%02X", r, g, b))
		})

	}

	robot := gobot.NewRobot("screenBot",
		[]gobot.Connection{board},
		[]gobot.Device{screen, sensorRotary, sensorLight, sensorTemp},
		work,
	)

	gbot.AddRobot(robot)

	gbot.Start()
}
func main() {
	gbot := gobot.NewGobot()
	beagleboneAdaptor := beaglebone.NewBeagleboneAdaptor("beaglebone")

	sensor := gpio.NewAnalogSensorDriver(beagleboneAdaptor, "sensor", "P9_33")
	led := gpio.NewLedDriver(beagleboneAdaptor, "led", "P9_14")

	work := func() {
		gobot.Every(100*time.Millisecond, func() {
			val := sensor.Read()
			brightness := uint8(gobot.ToScale(gobot.FromScale(float64(val), 0, 1024), 0, 255))
			fmt.Println("sensor", val)
			fmt.Println("brightness", brightness)
			led.Brightness(brightness)
		})
	}

	gbot.Robots = append(gbot.Robots,
		gobot.NewRobot("sensorBot", []gobot.Connection{beagleboneAdaptor}, []gobot.Device{sensor, led}, work))
	gbot.Start()
}
func (ia *AI) light() error {

	var err error
	d := &DataLux{iter: 0, iterMax: 0, lux: -1, iterMaxLux: 0}
	timeout := time.After(3 * time.Second)
	tick := time.NewTicker(100 * time.Millisecond)
	ia.toggle(true)
	defer ia.toggle(false)
	for {
		select {
		case <-timeout:
			d.iterMax = d.iter
			log.Println("Max lux is at: ", d.getAngle(), " degrees")
			coord := ia.getPos(nil).(rocproto.Coord)
			coord.Lat = coord.Lat + math.Cos(d.getAngle())
			coord.Long = coord.Long + math.Sin(d.getAngle())
			p := goPack.Prepare(uint32(rocproto.AiCodes_DLIGHT), rocproto.Packet_DATA, rocproto.Packet_CONTROL_SERVER, rocproto.Packet_VIDEO_CLIENT)
			p.Coord = &coord
			if err != nil {
				return err
			}
			tick.Stop()
			return ia.Send(p)
		case <-tick.C:
			v, err := ia.sensorLight.Read()
			if misc.CheckError(err, "reading light sensor in photoresistor.go", false) != nil {
				return err
			}
			d.iter += 1
			temp := gobot.ToScale(gobot.FromScale(float64(v), 0, 1024), 0, 255)
			//fmt.Println("Sensor data", temp)
			if diffIsCorrect(d.lux, temp) && temp > d.lux {
				d.lux = temp
				d.iterMaxLux = d.iter
			}
		}
	}
}
Exemple #12
0
func ExampleToScale() {
	fmt.Println(gobot.ToScale(500, 0, 10))
	// Output:
	// 10
}
Exemple #13
0
func scale(position float64) uint8 {
	return uint8(gobot.ToScale(gobot.FromScale(position, 0, 1), 0, 255))
}