Exemple #1
0
// SetContainerLinkLayerDevices sets the link-layer devices of the given
// containerMachine, setting each device linked to the corresponding
// BridgeDevice of the host machine m.
func (m *Machine) SetContainerLinkLayerDevices(containerMachine *Machine) error {
	allDevices, err := m.AllLinkLayerDevices()
	if err != nil {
		return errors.Annotate(err, "cannot get host machine devices")
	}

	bridgeDevicesByName := make(map[string]*LinkLayerDevice)
	bridgeDeviceNames := make([]string, 0, len(allDevices))

	for _, hostDevice := range allDevices {
		deviceType, name := hostDevice.Type(), hostDevice.Name()
		// Since the default bridges (for each container type) are
		// machine-local, and there's neither a way (at least not yet) nor any
		// point in allocating addresses from the (machine-local) subnets
		// configured on those bridges, we need to ignore them below.
		if deviceType == BridgeDevice {
			switch name {
			case container.DefaultLxdBridge, container.DefaultKvmBridge:
				logger.Debugf("skipping host bridge %q", name)
				continue
			}
			bridgeDevicesByName[name] = hostDevice
			bridgeDeviceNames = append(bridgeDeviceNames, name)
		}
	}

	sortedBridgeDeviceNames := network.NaturallySortDeviceNames(bridgeDeviceNames...)
	logger.Debugf("using host machine %q bridge devices: %v", m.Id(), sortedBridgeDeviceNames)
	containerDevicesArgs := make([]LinkLayerDeviceArgs, len(bridgeDeviceNames))

	for i, hostBridgeName := range sortedBridgeDeviceNames {
		hostBridge := bridgeDevicesByName[hostBridgeName]
		containerDevicesArgs[i] = LinkLayerDeviceArgs{
			Name:        fmt.Sprintf("eth%d", i),
			Type:        EthernetDevice,
			MACAddress:  generateMACAddress(),
			MTU:         hostBridge.MTU(),
			IsUp:        true,
			IsAutoStart: true,
			ParentName:  hostBridge.globalKey(),
		}
	}
	logger.Debugf("prepared container %q network config: %+v", containerMachine.Id(), containerDevicesArgs)

	if err := containerMachine.SetLinkLayerDevices(containerDevicesArgs...); err != nil {
		return errors.Trace(err)
	}

	logger.Debugf("container %q network config set", containerMachine.Id())
	return nil
}
Exemple #2
0
func (*DeviceNamesSuite) TestNaturallySortDeviceNames(c *gc.C) {
	for i, test := range []struct {
		message  string
		input    []string
		expected []string
	}{{
		message:  "empty input, empty output",
		input:    []string{},
		expected: []string{},
	}, {
		message: "nil input, nil output",
	}, {
		message:  "one input",
		input:    []string{"a"},
		expected: []string{"a"},
	}, {
		message:  "two values, no numbers",
		input:    []string{"b", "a"},
		expected: []string{"a", "b"},
	}, {
		message:  "two values, mixed content",
		input:    []string{"b1", "a1"},
		expected: []string{"a1", "b1"},
	}, {
		message:  "identical values, numbers only",
		input:    []string{"1", "1", "1", "1"},
		expected: []string{"1", "1", "1", "1"},
	}, {
		message:  "identical values, mixed content",
		input:    []string{"a1", "a1", "a1", "a1"},
		expected: []string{"a1", "a1", "a1", "a1"},
	}, {
		message:  "reversed input",
		input:    []string{"a10", "a9", "a8", "a7", "a6", "a5", "a4", "a3", "a2", "a1", "a0"},
		expected: []string{"a0", "a1", "a2", "a3", "a4", "a5", "a6", "a7", "a8", "a9", "a10"},
	}, {
		message:  "multiple numbers per value",
		input:    []string{"a10.11", "a10.10", "a10.1"},
		expected: []string{"a10.1", "a10.10", "a10.11"},
	}, {
		message:  "value with leading zero",
		input:    []string{"a50", "a51.", "a50.31", "a50.4", "a5.034e1", "a50.300"},
		expected: []string{"a5.034e1", "a50", "a50.4", "a50.31", "a50.300", "a51."},
	}, {
		message:  "value with multiple leading zeros",
		input:    []string{"a50", "a51.", "a0050.31", "a50.4", "a5.034e1", "a00050.300"},
		expected: []string{"a00050.300", "a0050.31", "a5.034e1", "a50", "a50.4", "a51."},
	}, {
		message:  "strings with numbers in ascending order",
		input:    []string{"a2", "a5", "a9", "a1", "a4", "a10", "a6"},
		expected: []string{"a1", "a2", "a4", "a5", "a6", "a9", "a10"},
	}, {
		message:  "values that look like version numbers",
		input:    []string{"1.9.9a", "1.11", "1.9.9b", "1.11.4", "1.10.1"},
		expected: []string{"1.9.9a", "1.9.9b", "1.10.1", "1.11", "1.11.4"},
	}, {
		message:  "bridge device names",
		input:    []string{"br-eth10", "br-eth2", "br-eth1"},
		expected: []string{"br-eth1", "br-eth2", "br-eth10"},
	}, {
		message:  "bridge device names with VLAN numbers",
		input:    []string{"br-eth10.10", "br-eth2.10", "br-eth200", "br-eth1.100", "br-eth1.10"},
		expected: []string{"br-eth1.10", "br-eth1.100", "br-eth2.10", "br-eth10.10", "br-eth200"},
	}, {
		message:  "bridge device names with leading zero",
		input:    []string{"br-eth0", "br-eth10.10", "br-eth2.10", "br-eth1.100", "br-eth1.10", "br-eth10"},
		expected: []string{"br-eth0", "br-eth1.10", "br-eth1.100", "br-eth2.10", "br-eth10", "br-eth10.10"},
	}} {
		c.Logf("%v: %s", i, test.message)
		result := network.NaturallySortDeviceNames(test.input...)
		c.Assert(result, gc.HasLen, len(test.input))
		c.Assert(result, gc.DeepEquals, test.expected)
	}
}