Exemple #1
0
func (g *configRESTOptionsGetter) loadWatchCacheSettings() error {
	if g.masterOptions.KubernetesMasterConfig == nil {
		return nil
	}

	server := apiserveroptions.NewAPIServer()
	if errs := cmdflags.Resolve(g.masterOptions.KubernetesMasterConfig.APIServerArguments, server.AddFlags); len(errs) > 0 {
		return kerrors.NewAggregate(errs)
	}

	g.cacheEnabled = server.EnableWatchCache

	errs := []error{}
	for _, c := range server.WatchCacheSizes {
		tokens := strings.Split(c, "#")
		if len(tokens) != 2 {
			errs = append(errs, fmt.Errorf("invalid watch cache size value '%s', expecting <resource>#<size> format (e.g. builds#100)", c))
			continue
		}

		resource := unversioned.ParseGroupResource(tokens[0])

		size, err := strconv.Atoi(tokens[1])
		if err != nil {
			errs = append(errs, fmt.Errorf("invalid watch cache size value '%s': %v", c, err))
			continue
		}

		g.cacheSizes[resource] = size
	}
	return kerrors.NewAggregate(errs)
}
func (g *configRESTOptionsGetter) loadSettings() error {
	server := apiserveroptions.NewAPIServer()
	if g.masterOptions.KubernetesMasterConfig != nil {
		if errs := cmdflags.Resolve(g.masterOptions.KubernetesMasterConfig.APIServerArguments, server.AddFlags); len(errs) > 0 {
			return kerrors.NewAggregate(errs)
		}
	}

	storageGroupsToEncodingVersion, err := server.StorageGroupsToEncodingVersion()
	if err != nil {
		return err
	}

	storageConfig := server.StorageConfig
	storageConfig.Prefix = g.masterOptions.EtcdStorageConfig.OpenShiftStoragePrefix
	storageConfig.ServerList = g.masterOptions.EtcdClientInfo.URLs
	storageConfig.KeyFile = g.masterOptions.EtcdClientInfo.ClientCert.KeyFile
	storageConfig.CertFile = g.masterOptions.EtcdClientInfo.ClientCert.CertFile
	storageConfig.CAFile = g.masterOptions.EtcdClientInfo.CA

	storageFactory, err := genericapiserver.BuildDefaultStorageFactory(
		storageConfig, server.DefaultStorageMediaType, kapi.Codecs,
		genericapiserver.NewDefaultResourceEncodingConfig(), storageGroupsToEncodingVersion,
		nil,
		g.defaultResourceConfig, server.RuntimeConfig)
	if err != nil {
		return err
	}
	storageFactory.DefaultResourcePrefixes = g.defaultResourcePrefixes
	g.storageFactory = storageFactory

	g.cacheEnabled = server.EnableWatchCache

	errs := []error{}
	for _, c := range server.WatchCacheSizes {
		tokens := strings.Split(c, "#")
		if len(tokens) != 2 {
			errs = append(errs, fmt.Errorf("invalid watch cache size value '%s', expecting <resource>#<size> format (e.g. builds#100)", c))
			continue
		}

		resource := unversioned.ParseGroupResource(tokens[0])

		size, err := strconv.Atoi(tokens[1])
		if err != nil {
			errs = append(errs, fmt.Errorf("invalid watch cache size value '%s': %v", c, err))
			continue
		}

		g.cacheSizes[resource] = size
	}
	return kerrors.NewAggregate(errs)
}
Exemple #3
0
func ValidateExtendedArguments(config api.ExtendedArguments, flagFunc func(*pflag.FlagSet)) fielderrors.ValidationErrorList {
	allErrs := fielderrors.ValidationErrorList{}

	// check extended arguments for errors
	for _, err := range cmdflags.Resolve(config, flagFunc) {
		switch t := err.(type) {
		case *fielderrors.ValidationError:
			allErrs = append(allErrs, t)
		default:
			allErrs = append(allErrs, fielderrors.NewFieldInvalid("????", config, err.Error()))
		}
	}

	return allErrs
}
Exemple #4
0
func BuildKubernetesMasterConfig(options configapi.MasterConfig, requestContextMapper kapi.RequestContextMapper, kubeClient *kclient.Client) (*MasterConfig, error) {
	if options.KubernetesMasterConfig == nil {
		return nil, errors.New("insufficient information to build KubernetesMasterConfig")
	}

	// Connect and setup etcd interfaces
	etcdClient, err := etcd.EtcdClient(options.EtcdClientInfo)
	if err != nil {
		return nil, err
	}

	kubeletClientConfig := configapi.GetKubeletClientConfig(options)
	kubeletClient, err := kclient.NewKubeletClient(kubeletClientConfig)
	if err != nil {
		return nil, fmt.Errorf("unable to configure Kubelet client: %v", err)
	}

	// in-order list of plug-ins that should intercept admission decisions
	// TODO: Push node environment support to upstream in future

	_, portString, err := net.SplitHostPort(options.ServingInfo.BindAddress)
	if err != nil {
		return nil, err
	}
	port, err := strconv.Atoi(portString)
	if err != nil {
		return nil, err
	}

	portRange, err := util.ParsePortRange(options.KubernetesMasterConfig.ServicesNodePortRange)
	if err != nil {
		return nil, err
	}

	podEvictionTimeout, err := time.ParseDuration(options.KubernetesMasterConfig.PodEvictionTimeout)
	if err != nil {
		return nil, fmt.Errorf("unable to parse PodEvictionTimeout: %v", err)
	}

	server := app.NewAPIServer()
	server.EventTTL = 2 * time.Hour
	server.ServiceClusterIPRange = net.IPNet(flagtypes.DefaultIPNet(options.KubernetesMasterConfig.ServicesSubnet))
	server.ServiceNodePortRange = *portRange
	server.AdmissionControl = strings.Join(AdmissionPlugins, ",")

	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubernetesMasterConfig.APIServerArguments, server.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	cmserver := cmapp.NewCMServer()
	cmserver.PodEvictionTimeout = podEvictionTimeout
	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubernetesMasterConfig.ControllerArguments, cmserver.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	cloud, err := cloudprovider.InitCloudProvider(cmserver.CloudProvider, cmserver.CloudConfigFile)
	if err != nil {
		return nil, err
	}
	if cloud != nil {
		glog.V(2).Infof("Successfully initialized cloud provider: %q from the config file: %q\n", server.CloudProvider, server.CloudConfigFile)
	}

	plugins := []admission.Interface{}
	for _, pluginName := range strings.Split(server.AdmissionControl, ",") {
		switch pluginName {
		case saadmit.PluginName:
			// we need to set some custom parameters on the service account admission controller, so create that one by hand
			saAdmitter := saadmit.NewServiceAccount(kubeClient)
			saAdmitter.LimitSecretReferences = options.ServiceAccountConfig.LimitSecretReferences
			saAdmitter.Run()
			plugins = append(plugins, saAdmitter)

		default:
			plugin := admission.InitPlugin(pluginName, kubeClient, server.AdmissionControlConfigFile)
			if plugin != nil {
				plugins = append(plugins, plugin)
			}

		}
	}
	admissionController := admission.NewChainHandler(plugins...)

	var proxyClientCerts []tls.Certificate
	if len(options.KubernetesMasterConfig.ProxyClientInfo.CertFile) > 0 {
		clientCert, err := tls.LoadX509KeyPair(
			options.KubernetesMasterConfig.ProxyClientInfo.CertFile,
			options.KubernetesMasterConfig.ProxyClientInfo.KeyFile,
		)
		if err != nil {
			return nil, err
		}
		proxyClientCerts = append(proxyClientCerts, clientCert)
	}

	// TODO you have to know every APIGroup you're enabling or upstream will panic.  It's alternative to panicing is Fataling
	// It needs a refactor to return errors
	storageDestinations := master.NewStorageDestinations()
	// storageVersions is a map from API group to allowed versions that must be a version exposed by the REST API or it breaks.
	// We need to fix the upstream to stop using the storage version as a preferred api version.
	storageVersions := map[string]string{}

	enabledKubeVersions := configapi.GetEnabledAPIVersionsForGroup(*options.KubernetesMasterConfig, configapi.APIGroupKube)
	enabledKubeVersionSet := sets.NewString(enabledKubeVersions...)
	if len(enabledKubeVersions) > 0 {
		databaseStorage, err := master.NewEtcdStorage(etcdClient, kapilatest.InterfacesForLegacyGroup, options.EtcdStorageConfig.KubernetesStorageVersion, options.EtcdStorageConfig.KubernetesStoragePrefix)
		if err != nil {
			return nil, fmt.Errorf("Error setting up Kubernetes server storage: %v", err)
		}
		storageDestinations.AddAPIGroup(configapi.APIGroupKube, databaseStorage)
		storageVersions[configapi.APIGroupKube] = options.EtcdStorageConfig.KubernetesStorageVersion
	}

	enabledExtensionsVersions := configapi.GetEnabledAPIVersionsForGroup(*options.KubernetesMasterConfig, configapi.APIGroupExtensions)
	if len(enabledExtensionsVersions) > 0 {
		groupMeta, err := kapilatest.Group(configapi.APIGroupExtensions)
		if err != nil {
			return nil, fmt.Errorf("Error setting up Kubernetes extensions server storage: %v", err)
		}
		// TODO expose storage version options for api groups
		databaseStorage, err := master.NewEtcdStorage(etcdClient, groupMeta.InterfacesFor, groupMeta.GroupVersion, options.EtcdStorageConfig.KubernetesStoragePrefix)
		if err != nil {
			return nil, fmt.Errorf("Error setting up Kubernetes extensions server storage: %v", err)
		}
		storageDestinations.AddAPIGroup(configapi.APIGroupExtensions, databaseStorage)
		storageVersions[configapi.APIGroupExtensions] = enabledExtensionsVersions[0]
	}

	m := &master.Config{
		PublicAddress: net.ParseIP(options.KubernetesMasterConfig.MasterIP),
		ReadWritePort: port,

		StorageDestinations: storageDestinations,
		StorageVersions:     storageVersions,

		EventTTL: server.EventTTL,
		//MinRequestTimeout: server.MinRequestTimeout,

		ServiceClusterIPRange: (*net.IPNet)(&server.ServiceClusterIPRange),
		ServiceNodePortRange:  server.ServiceNodePortRange,

		RequestContextMapper: requestContextMapper,

		KubeletClient:  kubeletClient,
		APIPrefix:      KubeAPIPrefix,
		APIGroupPrefix: KubeAPIGroupPrefix,

		EnableCoreControllers: true,

		MasterCount: options.KubernetesMasterConfig.MasterCount,

		Authorizer:       apiserver.NewAlwaysAllowAuthorizer(),
		AdmissionControl: admissionController,

		EnableExp: len(enabledExtensionsVersions) > 0,
		DisableV1: !enabledKubeVersionSet.Has("v1"),

		// Set the TLS options for proxying to pods and services
		// Proxying to nodes uses the kubeletClient TLS config (so can provide a different cert, and verify the node hostname)
		ProxyTLSClientConfig: &tls.Config{
			// Proxying to pods and services cannot verify hostnames, since they are contacted on randomly allocated IPs
			InsecureSkipVerify: true,
			Certificates:       proxyClientCerts,
		},
	}

	// set for consistency -- Origin only used m.EnableExp
	cmserver.EnableExperimental = m.EnableExp

	if options.DNSConfig != nil {
		_, dnsPortStr, err := net.SplitHostPort(options.DNSConfig.BindAddress)
		if err != nil {
			return nil, fmt.Errorf("unable to parse DNS bind address %s: %v", options.DNSConfig.BindAddress, err)
		}
		dnsPort, err := strconv.Atoi(dnsPortStr)
		if err != nil {
			return nil, fmt.Errorf("invalid DNS port: %v", err)
		}
		m.ExtraServicePorts = append(m.ExtraServicePorts,
			kapi.ServicePort{Name: "dns", Port: dnsPort, Protocol: kapi.ProtocolUDP, TargetPort: util.NewIntOrStringFromInt(dnsPort)},
			kapi.ServicePort{Name: "dns-tcp", Port: dnsPort, Protocol: kapi.ProtocolTCP, TargetPort: util.NewIntOrStringFromInt(dnsPort)},
		)
		m.ExtraEndpointPorts = append(m.ExtraEndpointPorts,
			kapi.EndpointPort{Name: "dns", Port: dnsPort, Protocol: kapi.ProtocolUDP},
			kapi.EndpointPort{Name: "dns-tcp", Port: dnsPort, Protocol: kapi.ProtocolTCP},
		)
	}

	kmaster := &MasterConfig{
		Options:    *options.KubernetesMasterConfig,
		KubeClient: kubeClient,

		Master:            m,
		ControllerManager: cmserver,
		CloudProvider:     cloud,
	}

	return kmaster, nil
}
Exemple #5
0
func BuildKubernetesMasterConfig(options configapi.MasterConfig, requestContextMapper kapi.RequestContextMapper, kubeClient *kclient.Client) (*MasterConfig, error) {
	if options.KubernetesMasterConfig == nil {
		return nil, errors.New("insufficient information to build KubernetesMasterConfig")
	}

	// Connect and setup etcd interfaces
	etcdClient, err := etcd.EtcdClient(options.EtcdClientInfo)
	if err != nil {
		return nil, err
	}
	databaseStorage, err := master.NewEtcdStorage(etcdClient, kapilatest.InterfacesFor, options.EtcdStorageConfig.KubernetesStorageVersion, options.EtcdStorageConfig.KubernetesStoragePrefix)
	if err != nil {
		return nil, fmt.Errorf("Error setting up Kubernetes server storage: %v", err)
	}

	kubeletClientConfig := configapi.GetKubeletClientConfig(options)
	kubeletClient, err := kclient.NewKubeletClient(kubeletClientConfig)
	if err != nil {
		return nil, fmt.Errorf("unable to configure Kubelet client: %v", err)
	}

	// in-order list of plug-ins that should intercept admission decisions
	// TODO: Push node environment support to upstream in future

	_, portString, err := net.SplitHostPort(options.ServingInfo.BindAddress)
	if err != nil {
		return nil, err
	}
	port, err := strconv.Atoi(portString)
	if err != nil {
		return nil, err
	}

	portRange, err := util.ParsePortRange(options.KubernetesMasterConfig.ServicesNodePortRange)
	if err != nil {
		return nil, err
	}

	podEvictionTimeout, err := time.ParseDuration(options.KubernetesMasterConfig.PodEvictionTimeout)
	if err != nil {
		return nil, fmt.Errorf("unable to parse PodEvictionTimeout: %v", err)
	}

	server := app.NewAPIServer()
	server.EventTTL = 2 * time.Hour
	server.ServiceClusterIPRange = net.IPNet(flagtypes.DefaultIPNet(options.KubernetesMasterConfig.ServicesSubnet))
	server.ServiceNodePortRange = *portRange
	server.AdmissionControl = strings.Join(AdmissionPlugins, ",")

	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubernetesMasterConfig.APIServerArguments, server.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	cmserver := cmapp.NewCMServer()
	cmserver.PodEvictionTimeout = podEvictionTimeout
	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubernetesMasterConfig.ControllerArguments, cmserver.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	cloud, err := cloudprovider.InitCloudProvider(cmserver.CloudProvider, cmserver.CloudConfigFile)
	if err != nil {
		return nil, err
	}

	plugins := []admission.Interface{}
	for _, pluginName := range strings.Split(server.AdmissionControl, ",") {
		switch pluginName {
		case saadmit.PluginName:
			// we need to set some custom parameters on the service account admission controller, so create that one by hand
			saAdmitter := saadmit.NewServiceAccount(kubeClient)
			saAdmitter.LimitSecretReferences = options.ServiceAccountConfig.LimitSecretReferences
			saAdmitter.Run()
			plugins = append(plugins, saAdmitter)

		default:
			plugin := admission.InitPlugin(pluginName, kubeClient, server.AdmissionControlConfigFile)
			if plugin != nil {
				plugins = append(plugins, plugin)
			}

		}
	}
	admissionController := admission.NewChainHandler(plugins...)

	var proxyClientCerts []tls.Certificate
	if len(options.KubernetesMasterConfig.ProxyClientInfo.CertFile) > 0 {
		clientCert, err := tls.LoadX509KeyPair(
			options.KubernetesMasterConfig.ProxyClientInfo.CertFile,
			options.KubernetesMasterConfig.ProxyClientInfo.KeyFile,
		)
		if err != nil {
			return nil, err
		}
		proxyClientCerts = append(proxyClientCerts, clientCert)
	}

	m := &master.Config{
		PublicAddress: net.ParseIP(options.KubernetesMasterConfig.MasterIP),
		ReadWritePort: port,

		DatabaseStorage:    databaseStorage,
		ExpDatabaseStorage: databaseStorage,

		EventTTL: server.EventTTL,
		//MinRequestTimeout: server.MinRequestTimeout,

		ServiceClusterIPRange: (*net.IPNet)(&server.ServiceClusterIPRange),
		ServiceNodePortRange:  server.ServiceNodePortRange,

		RequestContextMapper: requestContextMapper,

		KubeletClient: kubeletClient,
		APIPrefix:     KubeAPIPrefix,

		EnableCoreControllers: true,

		MasterCount: options.KubernetesMasterConfig.MasterCount,

		Authorizer:       apiserver.NewAlwaysAllowAuthorizer(),
		AdmissionControl: admissionController,

		EnableV1Beta3: configapi.HasKubernetesAPILevel(*options.KubernetesMasterConfig, "v1beta3"),
		DisableV1:     !configapi.HasKubernetesAPILevel(*options.KubernetesMasterConfig, "v1"),

		// Set the TLS options for proxying to pods and services
		// Proxying to nodes uses the kubeletClient TLS config (so can provide a different cert, and verify the node hostname)
		ProxyTLSClientConfig: &tls.Config{
			// Proxying to pods and services cannot verify hostnames, since they are contacted on randomly allocated IPs
			InsecureSkipVerify: true,
			Certificates:       proxyClientCerts,
		},
	}

	kmaster := &MasterConfig{
		Options:    *options.KubernetesMasterConfig,
		KubeClient: kubeClient,

		Master:            m,
		ControllerManager: cmserver,
		CloudProvider:     cloud,
	}

	return kmaster, nil
}
Exemple #6
0
func BuildKubernetesMasterConfig(options configapi.MasterConfig, requestContextMapper kapi.RequestContextMapper, kubeClient *kclient.Client, pluginInitializer oadmission.PluginInitializer) (*MasterConfig, error) {
	if options.KubernetesMasterConfig == nil {
		return nil, errors.New("insufficient information to build KubernetesMasterConfig")
	}

	// Connect and setup etcd interfaces
	etcdClient, err := etcd.MakeNewEtcdClient(options.EtcdClientInfo)
	if err != nil {
		return nil, err
	}

	kubeletClientConfig := configapi.GetKubeletClientConfig(options)
	kubeletClient, err := kubeletclient.NewStaticKubeletClient(kubeletClientConfig)
	if err != nil {
		return nil, fmt.Errorf("unable to configure Kubelet client: %v", err)
	}

	// in-order list of plug-ins that should intercept admission decisions
	// TODO: Push node environment support to upstream in future

	_, portString, err := net.SplitHostPort(options.ServingInfo.BindAddress)
	if err != nil {
		return nil, err
	}
	port, err := strconv.Atoi(portString)
	if err != nil {
		return nil, err
	}

	portRange, err := knet.ParsePortRange(options.KubernetesMasterConfig.ServicesNodePortRange)
	if err != nil {
		return nil, err
	}

	podEvictionTimeout, err := time.ParseDuration(options.KubernetesMasterConfig.PodEvictionTimeout)
	if err != nil {
		return nil, fmt.Errorf("unable to parse PodEvictionTimeout: %v", err)
	}

	// Defaults are tested in TestAPIServerDefaults
	server := apiserveroptions.NewAPIServer()
	// Adjust defaults
	server.EventTTL = 2 * time.Hour
	server.ServiceClusterIPRange = net.IPNet(flagtypes.DefaultIPNet(options.KubernetesMasterConfig.ServicesSubnet))
	server.ServiceNodePortRange = *portRange
	server.AdmissionControl = strings.Join(AdmissionPlugins, ",")
	server.EnableLogsSupport = false // don't expose server logs

	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubernetesMasterConfig.APIServerArguments, server.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	if len(options.KubernetesMasterConfig.AdmissionConfig.PluginOrderOverride) > 0 {
		server.AdmissionControl = strings.Join(options.KubernetesMasterConfig.AdmissionConfig.PluginOrderOverride, ",")
	}

	// Defaults are tested in TestCMServerDefaults
	cmserver := cmapp.NewCMServer()
	// Adjust defaults
	cmserver.Address = "" // no healthz endpoint
	cmserver.Port = 0     // no healthz endpoint
	cmserver.PodEvictionTimeout = unversioned.Duration{Duration: podEvictionTimeout}

	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubernetesMasterConfig.ControllerArguments, cmserver.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	cloud, err := cloudprovider.InitCloudProvider(cmserver.CloudProvider, cmserver.CloudConfigFile)
	if err != nil {
		return nil, err
	}
	if cloud != nil {
		glog.V(2).Infof("Successfully initialized cloud provider: %q from the config file: %q\n", server.CloudProvider, server.CloudConfigFile)
	}

	plugins := []admission.Interface{}
	for _, pluginName := range strings.Split(server.AdmissionControl, ",") {
		switch pluginName {
		case serviceadmit.ExternalIPPluginName:
			// this needs to be moved upstream to be part of core config
			reject, admit, err := serviceadmit.ParseCIDRRules(options.NetworkConfig.ExternalIPNetworkCIDRs)
			if err != nil {
				// should have been caught with validation
				return nil, err
			}
			plugins = append(plugins, serviceadmit.NewExternalIPRanger(reject, admit))
		case saadmit.PluginName:
			// we need to set some custom parameters on the service account admission controller, so create that one by hand
			saAdmitter := saadmit.NewServiceAccount(internalclientset.FromUnversionedClient(kubeClient))
			saAdmitter.LimitSecretReferences = options.ServiceAccountConfig.LimitSecretReferences
			saAdmitter.Run()
			plugins = append(plugins, saAdmitter)

		default:
			configFile, err := pluginconfig.GetPluginConfigFile(options.KubernetesMasterConfig.AdmissionConfig.PluginConfig, pluginName, server.AdmissionControlConfigFile)
			if err != nil {
				return nil, err
			}
			plugin := admission.InitPlugin(pluginName, internalclientset.FromUnversionedClient(kubeClient), configFile)
			if plugin != nil {
				plugins = append(plugins, plugin)
			}

		}
	}
	pluginInitializer.Initialize(plugins)
	// ensure that plugins have been properly initialized
	if err := oadmission.Validate(plugins); err != nil {
		return nil, err
	}
	admissionController := admission.NewChainHandler(plugins...)

	var proxyClientCerts []tls.Certificate
	if len(options.KubernetesMasterConfig.ProxyClientInfo.CertFile) > 0 {
		clientCert, err := tls.LoadX509KeyPair(
			options.KubernetesMasterConfig.ProxyClientInfo.CertFile,
			options.KubernetesMasterConfig.ProxyClientInfo.KeyFile,
		)
		if err != nil {
			return nil, err
		}
		proxyClientCerts = append(proxyClientCerts, clientCert)
	}

	// TODO you have to know every APIGroup you're enabling or upstream will panic.  It's alternative to panicing is Fataling
	// It needs a refactor to return errors
	storageDestinations := genericapiserver.NewStorageDestinations()
	// storageVersions is a map from API group to allowed versions that must be a version exposed by the REST API or it breaks.
	// We need to fix the upstream to stop using the storage version as a preferred api version.
	storageVersions := map[string]string{}

	enabledKubeVersions := configapi.GetEnabledAPIVersionsForGroup(*options.KubernetesMasterConfig, configapi.APIGroupKube)
	if len(enabledKubeVersions) > 0 {
		kubeStorageVersion := unversioned.GroupVersion{Group: configapi.APIGroupKube, Version: options.EtcdStorageConfig.KubernetesStorageVersion}
		databaseStorage, err := NewEtcdStorage(etcdClient, kubeStorageVersion, options.EtcdStorageConfig.KubernetesStoragePrefix)
		if err != nil {
			return nil, fmt.Errorf("Error setting up Kubernetes server storage: %v", err)
		}
		storageDestinations.AddAPIGroup(configapi.APIGroupKube, databaseStorage)
		storageVersions[configapi.APIGroupKube] = options.EtcdStorageConfig.KubernetesStorageVersion
	}

	// enable this if extensions API is enabled (or batch or autoscaling, since they persist to extensions/v1beta1 for now)
	// TODO: replace this with a loop over configured storage versions
	extensionsEnabled := len(configapi.GetEnabledAPIVersionsForGroup(*options.KubernetesMasterConfig, configapi.APIGroupExtensions)) > 0
	batchEnabled := len(configapi.GetEnabledAPIVersionsForGroup(*options.KubernetesMasterConfig, configapi.APIGroupBatch)) > 0
	autoscalingEnabled := len(configapi.GetEnabledAPIVersionsForGroup(*options.KubernetesMasterConfig, configapi.APIGroupAutoscaling)) > 0
	if extensionsEnabled || autoscalingEnabled || batchEnabled {
		// TODO: replace this with a configured storage version for extensions once configuration exposes this
		extensionsStorageVersion := unversioned.GroupVersion{Group: extensions.GroupName, Version: "v1beta1"}
		databaseStorage, err := NewEtcdStorage(etcdClient, extensionsStorageVersion, options.EtcdStorageConfig.KubernetesStoragePrefix)
		if err != nil {
			return nil, fmt.Errorf("Error setting up Kubernetes extensions server storage: %v", err)
		}
		storageDestinations.AddAPIGroup(configapi.APIGroupExtensions, databaseStorage)
		storageVersions[configapi.APIGroupExtensions] = extensionsStorageVersion.String()
	}

	// Preserve previous behavior of using the first non-loopback address
	// TODO: Deprecate this behavior and just require a valid value to be passed in
	publicAddress := net.ParseIP(options.KubernetesMasterConfig.MasterIP)
	if publicAddress == nil || publicAddress.IsUnspecified() || publicAddress.IsLoopback() {
		hostIP, err := knet.ChooseHostInterface()
		if err != nil {
			glog.Fatalf("Unable to find suitable network address.error='%v'. Set the masterIP directly to avoid this error.", err)
		}
		publicAddress = hostIP
		glog.Infof("Will report %v as public IP address.", publicAddress)
	}

	m := &master.Config{
		Config: &genericapiserver.Config{
			PublicAddress: publicAddress,
			ReadWritePort: port,

			Authorizer:       apiserver.NewAlwaysAllowAuthorizer(),
			AdmissionControl: admissionController,

			StorageDestinations: storageDestinations,
			StorageVersions:     storageVersions,

			ServiceClusterIPRange: (*net.IPNet)(&server.ServiceClusterIPRange),
			ServiceNodePortRange:  server.ServiceNodePortRange,

			RequestContextMapper: requestContextMapper,

			APIGroupVersionOverrides: getAPIGroupVersionOverrides(options),
			APIPrefix:                KubeAPIPrefix,
			APIGroupPrefix:           KubeAPIGroupPrefix,

			MasterCount: options.KubernetesMasterConfig.MasterCount,

			// Set the TLS options for proxying to pods and services
			// Proxying to nodes uses the kubeletClient TLS config (so can provide a different cert, and verify the node hostname)
			ProxyTLSClientConfig: &tls.Config{
				// Proxying to pods and services cannot verify hostnames, since they are contacted on randomly allocated IPs
				InsecureSkipVerify: true,
				Certificates:       proxyClientCerts,
			},

			Serializer: kapi.Codecs,
		},

		EventTTL: server.EventTTL,
		//MinRequestTimeout: server.MinRequestTimeout,

		KubeletClient: kubeletClient,

		EnableCoreControllers: true,
	}

	if options.DNSConfig != nil {
		_, dnsPortStr, err := net.SplitHostPort(options.DNSConfig.BindAddress)
		if err != nil {
			return nil, fmt.Errorf("unable to parse DNS bind address %s: %v", options.DNSConfig.BindAddress, err)
		}
		dnsPort, err := strconv.Atoi(dnsPortStr)
		if err != nil {
			return nil, fmt.Errorf("invalid DNS port: %v", err)
		}
		m.ExtraServicePorts = append(m.ExtraServicePorts,
			kapi.ServicePort{Name: "dns", Port: 53, Protocol: kapi.ProtocolUDP, TargetPort: intstr.FromInt(dnsPort)},
			kapi.ServicePort{Name: "dns-tcp", Port: 53, Protocol: kapi.ProtocolTCP, TargetPort: intstr.FromInt(dnsPort)},
		)
		m.ExtraEndpointPorts = append(m.ExtraEndpointPorts,
			kapi.EndpointPort{Name: "dns", Port: dnsPort, Protocol: kapi.ProtocolUDP},
			kapi.EndpointPort{Name: "dns-tcp", Port: dnsPort, Protocol: kapi.ProtocolTCP},
		)
	}

	kmaster := &MasterConfig{
		Options:    *options.KubernetesMasterConfig,
		KubeClient: kubeClient,

		Master:            m,
		ControllerManager: cmserver,
		CloudProvider:     cloud,
	}

	return kmaster, nil
}
Exemple #7
0
func BuildKubernetesNodeConfig(options configapi.NodeConfig) (*NodeConfig, error) {
	kubeClient, _, err := configapi.GetKubeClient(options.MasterKubeConfig)
	if err != nil {
		return nil, err
	}

	if options.NodeName == "localhost" {
		glog.Warningf(`Using "localhost" as node name will not resolve from all locations`)
	}

	var dnsIP net.IP
	if len(options.DNSIP) > 0 {
		dnsIP = net.ParseIP(options.DNSIP)
		if dnsIP == nil {
			return nil, fmt.Errorf("Invalid DNS IP: %s", options.DNSIP)
		}
	}

	clientCAs, err := util.CertPoolFromFile(options.ServingInfo.ClientCA)
	if err != nil {
		return nil, err
	}

	imageTemplate := variable.NewDefaultImageTemplate()
	imageTemplate.Format = options.ImageConfig.Format
	imageTemplate.Latest = options.ImageConfig.Latest

	var path string
	var fileCheckInterval int64
	if options.PodManifestConfig != nil {
		path = options.PodManifestConfig.Path
		fileCheckInterval = options.PodManifestConfig.FileCheckIntervalSeconds
	}

	var dockerExecHandler dockertools.ExecHandler

	switch options.DockerConfig.ExecHandlerName {
	case configapi.DockerExecHandlerNative:
		dockerExecHandler = &dockertools.NativeExecHandler{}
	case configapi.DockerExecHandlerNsenter:
		dockerExecHandler = &dockertools.NsenterExecHandler{}
	}

	kubeAddress, kubePortStr, err := net.SplitHostPort(options.ServingInfo.BindAddress)
	if err != nil {
		return nil, fmt.Errorf("cannot parse node address: %v", err)
	}
	kubePort, err := strconv.Atoi(kubePortStr)
	if err != nil {
		return nil, fmt.Errorf("cannot parse node port: %v", err)
	}

	address := util.IP{}
	if err := address.Set(kubeAddress); err != nil {
		return nil, err
	}

	// declare the OpenShift defaults from config
	server := kapp.NewKubeletServer()
	server.Config = path
	server.RootDirectory = options.VolumeDirectory
	server.HostnameOverride = options.NodeName
	server.AllowPrivileged = true
	server.RegisterNode = true
	server.Address = address
	server.Port = uint(kubePort)
	server.ReadOnlyPort = 0 // no read only access
	server.ClusterDNS = util.IP(dnsIP)
	server.ClusterDomain = options.DNSDomain
	server.NetworkPluginName = options.NetworkPluginName
	server.HostNetworkSources = strings.Join([]string{kubelet.ApiserverSource, kubelet.FileSource}, ",")
	server.HTTPCheckFrequency = 0 // no remote HTTP pod creation access
	server.FileCheckFrequency = time.Duration(fileCheckInterval) * time.Second
	server.PodInfraContainerImage = imageTemplate.ExpandOrDie("pod")

	// prevents kube from generating certs
	server.TLSCertFile = options.ServingInfo.ServerCert.CertFile
	server.TLSPrivateKeyFile = options.ServingInfo.ServerCert.KeyFile

	if value := cmdutil.Env("OPENSHIFT_CONTAINERIZED", ""); len(value) > 0 {
		server.Containerized = value == "true"
	}

	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubeletArguments, server.AddFlags); len(err) > 0 {
		return nil, errors.NewAggregate(err)
	}

	cfg, err := server.KubeletConfig()
	if err != nil {
		return nil, err
	}

	// provide any config overrides
	cfg.StreamingConnectionIdleTimeout = 5 * time.Minute // TODO: should be set
	cfg.KubeClient = kubeClient
	cfg.DockerExecHandler = dockerExecHandler

	// TODO: could be cleaner
	if configapi.UseTLS(options.ServingInfo) {
		cfg.TLSOptions = &kubelet.TLSOptions{
			Config: &tls.Config{
				// Change default from SSLv3 to TLSv1.0 (because of POODLE vulnerability)
				MinVersion: tls.VersionTLS10,
				// RequireAndVerifyClientCert lets us limit requests to ones with a valid client certificate
				ClientAuth: tls.RequireAndVerifyClientCert,
				ClientCAs:  clientCAs,
			},
			CertFile: options.ServingInfo.ServerCert.CertFile,
			KeyFile:  options.ServingInfo.ServerCert.KeyFile,
		}
	} else {
		cfg.TLSOptions = nil
	}

	config := &NodeConfig{
		BindAddress: options.ServingInfo.BindAddress,

		AllowDisabledDocker: options.AllowDisabledDocker,

		Client: kubeClient,

		VolumeDir: options.VolumeDirectory,

		KubeletServer: server,
		KubeletConfig: cfg,
	}

	return config, nil
}
func BuildKubernetesNodeConfig(options configapi.NodeConfig, enableProxy, enableDNS bool) (*NodeConfig, error) {
	originClient, _, err := configapi.GetOpenShiftClient(options.MasterKubeConfig, options.MasterClientConnectionOverrides)
	if err != nil {
		return nil, err
	}
	_, kubeClient, _, err := configapi.GetKubeClient(options.MasterKubeConfig, options.MasterClientConnectionOverrides)
	if err != nil {
		return nil, err
	}
	// Make a separate client for event reporting, to avoid event QPS blocking node calls
	_, eventClient, _, err := configapi.GetKubeClient(options.MasterKubeConfig, options.MasterClientConnectionOverrides)
	if err != nil {
		return nil, err
	}

	if options.NodeName == "localhost" {
		glog.Warningf(`Using "localhost" as node name will not resolve from all locations`)
	}

	clientCAs, err := kcrypto.CertPoolFromFile(options.ServingInfo.ClientCA)
	if err != nil {
		return nil, err
	}

	imageTemplate := variable.NewDefaultImageTemplate()
	imageTemplate.Format = options.ImageConfig.Format
	imageTemplate.Latest = options.ImageConfig.Latest

	var path string
	var fileCheckInterval int64
	if options.PodManifestConfig != nil {
		path = options.PodManifestConfig.Path
		fileCheckInterval = options.PodManifestConfig.FileCheckIntervalSeconds
	}

	kubeAddressStr, kubePortStr, err := net.SplitHostPort(options.ServingInfo.BindAddress)
	if err != nil {
		return nil, fmt.Errorf("cannot parse node address: %v", err)
	}
	kubePort, err := strconv.Atoi(kubePortStr)
	if err != nil {
		return nil, fmt.Errorf("cannot parse node port: %v", err)
	}

	if err = validateNetworkPluginName(originClient, options.NetworkConfig.NetworkPluginName); err != nil {
		return nil, err
	}

	// Defaults are tested in TestKubeletDefaults
	server := kubeletoptions.NewKubeletServer()
	// Adjust defaults
	server.RequireKubeConfig = true
	server.PodManifestPath = path
	server.RootDirectory = options.VolumeDirectory
	server.NodeIP = options.NodeIP
	server.HostnameOverride = options.NodeName
	server.AllowPrivileged = true
	server.RegisterNode = true
	server.Address = kubeAddressStr
	server.Port = int32(kubePort)
	server.ReadOnlyPort = 0        // no read only access
	server.CAdvisorPort = 0        // no unsecured cadvisor access
	server.HealthzPort = 0         // no unsecured healthz access
	server.HealthzBindAddress = "" // no unsecured healthz access
	server.ClusterDNS = options.DNSIP
	server.ClusterDomain = options.DNSDomain
	server.NetworkPluginName = options.NetworkConfig.NetworkPluginName
	server.HostNetworkSources = []string{kubelettypes.ApiserverSource, kubelettypes.FileSource}
	server.HostPIDSources = []string{kubelettypes.ApiserverSource, kubelettypes.FileSource}
	server.HostIPCSources = []string{kubelettypes.ApiserverSource, kubelettypes.FileSource}
	server.HTTPCheckFrequency = unversioned.Duration{Duration: time.Duration(0)} // no remote HTTP pod creation access
	server.FileCheckFrequency = unversioned.Duration{Duration: time.Duration(fileCheckInterval) * time.Second}
	server.PodInfraContainerImage = imageTemplate.ExpandOrDie("pod")
	server.CPUCFSQuota = true // enable cpu cfs quota enforcement by default
	server.MaxPods = 250
	server.PodsPerCore = 10
	server.SerializeImagePulls = false          // disable serialized image pulls by default
	server.EnableControllerAttachDetach = false // stay consistent with existing config, but admins should enable it
	if enableDNS {
		// if we are running local DNS, skydns will load the default recursive nameservers for us
		server.ResolverConfig = ""
	}
	server.DockerExecHandlerName = string(options.DockerConfig.ExecHandlerName)

	if sdnapi.IsOpenShiftNetworkPlugin(server.NetworkPluginName) {
		// set defaults for openshift-sdn
		server.HairpinMode = componentconfig.HairpinNone
		server.ConfigureCBR0 = false
	}

	// prevents kube from generating certs
	server.TLSCertFile = options.ServingInfo.ServerCert.CertFile
	server.TLSPrivateKeyFile = options.ServingInfo.ServerCert.KeyFile

	containerized := cmdutil.Env("OPENSHIFT_CONTAINERIZED", "") == "true"
	server.Containerized = containerized

	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubeletArguments, server.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	proxyconfig, err := buildKubeProxyConfig(options)
	if err != nil {
		return nil, err
	}

	// Initialize SDN before building kubelet config so it can modify options
	iptablesSyncPeriod, err := time.ParseDuration(options.IPTablesSyncPeriod)
	if err != nil {
		return nil, fmt.Errorf("Cannot parse the provided ip-tables sync period (%s) : %v", options.IPTablesSyncPeriod, err)
	}
	sdnPlugin, err := sdnplugin.NewNodePlugin(options.NetworkConfig.NetworkPluginName, originClient, kubeClient, options.NodeName, options.NodeIP, iptablesSyncPeriod, options.NetworkConfig.MTU)
	if err != nil {
		return nil, fmt.Errorf("SDN initialization failed: %v", err)
	}
	if sdnPlugin != nil {
		// SDN plugin pod setup/teardown is implemented as a CNI plugin
		server.NetworkPluginName = kubeletcni.CNIPluginName
		server.NetworkPluginDir = kubeletcni.DefaultNetDir
		server.HairpinMode = componentconfig.HairpinNone
		server.ConfigureCBR0 = false
	}

	deps, err := kubeletapp.UnsecuredKubeletDeps(server)
	if err != nil {
		return nil, err
	}

	// Initialize cloud provider
	cloud, err := buildCloudProvider(server)
	if err != nil {
		return nil, err
	}
	deps.Cloud = cloud

	// Replace the kubelet-created CNI plugin with the SDN plugin
	// Kubelet must be initialized with NetworkPluginName="cni" but
	// the SDN plugin (if available) needs to be the only one used
	if sdnPlugin != nil {
		deps.NetworkPlugins = []kubeletnetwork.NetworkPlugin{sdnPlugin}
	}

	// provide any config overrides
	//deps.NodeName = options.NodeName
	deps.KubeClient = kubeClient
	deps.EventClient = eventClient

	// Setup auth
	authnTTL, err := time.ParseDuration(options.AuthConfig.AuthenticationCacheTTL)
	if err != nil {
		return nil, err
	}
	authn, err := newAuthenticator(kubeClient.Authentication(), clientCAs, authnTTL, options.AuthConfig.AuthenticationCacheSize)
	if err != nil {
		return nil, err
	}

	authzAttr, err := newAuthorizerAttributesGetter(options.NodeName)
	if err != nil {
		return nil, err
	}

	authzTTL, err := time.ParseDuration(options.AuthConfig.AuthorizationCacheTTL)
	if err != nil {
		return nil, err
	}
	authz, err := newAuthorizer(originClient, authzTTL, options.AuthConfig.AuthorizationCacheSize)
	if err != nil {
		return nil, err
	}

	deps.Auth = kubeletserver.NewKubeletAuth(authn, authzAttr, authz)

	// TODO: could be cleaner
	if configapi.UseTLS(options.ServingInfo) {
		extraCerts, err := configapi.GetNamedCertificateMap(options.ServingInfo.NamedCertificates)
		if err != nil {
			return nil, err
		}
		deps.TLSOptions = &kubeletserver.TLSOptions{
			Config: crypto.SecureTLSConfig(&tls.Config{
				// RequestClientCert lets us request certs, but allow requests without client certs
				// Verification is done by the authn layer
				ClientAuth: tls.RequestClientCert,
				ClientCAs:  clientCAs,
				// Set SNI certificate func
				// Do not use NameToCertificate, since that requires certificates be included in the server's tlsConfig.Certificates list,
				// which we do not control when running with http.Server#ListenAndServeTLS
				GetCertificate: cmdutil.GetCertificateFunc(extraCerts),
			}),
			CertFile: options.ServingInfo.ServerCert.CertFile,
			KeyFile:  options.ServingInfo.ServerCert.KeyFile,
		}
	} else {
		deps.TLSOptions = nil
	}

	sdnProxy, err := sdnplugin.NewProxyPlugin(options.NetworkConfig.NetworkPluginName, originClient, kubeClient)
	if err != nil {
		return nil, fmt.Errorf("SDN proxy initialization failed: %v", err)
	}

	config := &NodeConfig{
		BindAddress: options.ServingInfo.BindAddress,

		AllowDisabledDocker: options.AllowDisabledDocker,
		Containerized:       containerized,

		Client: kubeClient,

		VolumeDir: options.VolumeDirectory,

		KubeletServer: server,
		KubeletDeps:   deps,

		ServicesReady: make(chan struct{}),

		ProxyConfig:    proxyconfig,
		EnableUnidling: options.EnableUnidling,

		SDNPlugin: sdnPlugin,
		SDNProxy:  sdnProxy,
	}

	if enableDNS {
		dnsConfig, err := dns.NewServerDefaults()
		if err != nil {
			return nil, fmt.Errorf("DNS configuration was not possible: %v", err)
		}
		if len(options.DNSIP) > 0 {
			dnsConfig.DnsAddr = options.DNSIP + ":53"
		}
		dnsConfig.Domain = server.ClusterDomain + "."
		dnsConfig.Local = "openshift.default.svc." + dnsConfig.Domain

		services, serviceStore := dns.NewCachedServiceAccessorAndStore()
		endpoints, endpointsStore := dns.NewCachedEndpointsAccessorAndStore()
		if !enableProxy {
			endpoints = deps.KubeClient
			endpointsStore = nil
		}

		// TODO: use kubeletConfig.ResolverConfig as an argument to etcd in the event the
		//   user sets it, instead of passing it to the kubelet.

		config.ServiceStore = serviceStore
		config.EndpointsStore = endpointsStore
		config.DNSServer = &dns.Server{
			Config:      dnsConfig,
			Services:    services,
			Endpoints:   endpoints,
			MetricsName: "node",
		}
	}

	return config, nil
}
func buildKubeProxyConfig(options configapi.NodeConfig) (*proxyoptions.ProxyServerConfig, error) {
	// get default config
	proxyconfig := proxyoptions.NewProxyConfig()

	// BindAddress - Override default bind address from our config
	addr := options.ServingInfo.BindAddress
	host, _, err := net.SplitHostPort(addr)
	if err != nil {
		return nil, fmt.Errorf("The provided value to bind to must be an ip:port %q", addr)
	}
	ip := net.ParseIP(host)
	if ip == nil {
		return nil, fmt.Errorf("The provided value to bind to must be an ip:port: %q", addr)
	}
	proxyconfig.BindAddress = ip.String()

	// HealthzPort, HealthzBindAddress - disable
	proxyconfig.HealthzPort = 0
	proxyconfig.HealthzBindAddress = ""

	// OOMScoreAdj, ResourceContainer - clear, we don't run in a container
	oomScoreAdj := int32(0)
	proxyconfig.OOMScoreAdj = &oomScoreAdj
	proxyconfig.ResourceContainer = ""

	// use the same client as the node
	proxyconfig.Master = ""
	proxyconfig.Kubeconfig = options.MasterKubeConfig

	// PortRange, use default
	// HostnameOverride, use default

	// ProxyMode, set to iptables
	proxyconfig.Mode = "iptables"

	// IptablesSyncPeriod, set to our config value
	syncPeriod, err := time.ParseDuration(options.IPTablesSyncPeriod)
	if err != nil {
		return nil, fmt.Errorf("Cannot parse the provided ip-tables sync period (%s) : %v", options.IPTablesSyncPeriod, err)
	}
	proxyconfig.IPTablesSyncPeriod = unversioned.Duration{
		Duration: syncPeriod,
	}

	// ConfigSyncPeriod, use default

	// NodeRef, build from config
	proxyconfig.NodeRef = &kapi.ObjectReference{
		Kind: "Node",
		Name: options.NodeName,
	}

	// MasqueradeAll, use default

	// CleanupAndExit, use default

	// KubeAPIQPS, use default, doesn't apply until we build a separate client
	// KubeAPIBurst, use default, doesn't apply until we build a separate client

	// UDPIdleTimeout, use default

	// Resolve cmd flags to add any user overrides
	if err := cmdflags.Resolve(options.ProxyArguments, proxyconfig.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	return proxyconfig, nil
}
Exemple #10
0
func BuildKubernetesNodeConfig(options configapi.NodeConfig) (*NodeConfig, error) {
	kubeClient, _, err := configapi.GetKubeClient(options.MasterKubeConfig)
	if err != nil {
		return nil, err
	}

	if options.NodeName == "localhost" {
		glog.Warningf(`Using "localhost" as node name will not resolve from all locations`)
	}

	var dnsIP net.IP
	if len(options.DNSIP) > 0 {
		dnsIP = net.ParseIP(options.DNSIP)
		if dnsIP == nil {
			return nil, fmt.Errorf("Invalid DNS IP: %s", options.DNSIP)
		}
	}

	clientCAs, err := util.CertPoolFromFile(options.ServingInfo.ClientCA)
	if err != nil {
		return nil, err
	}

	imageTemplate := variable.NewDefaultImageTemplate()
	imageTemplate.Format = options.ImageConfig.Format
	imageTemplate.Latest = options.ImageConfig.Latest

	var path string
	var fileCheckInterval int64
	if options.PodManifestConfig != nil {
		path = options.PodManifestConfig.Path
		fileCheckInterval = options.PodManifestConfig.FileCheckIntervalSeconds
	}

	var dockerExecHandler dockertools.ExecHandler

	switch options.DockerConfig.ExecHandlerName {
	case configapi.DockerExecHandlerNative:
		dockerExecHandler = &dockertools.NativeExecHandler{}
	case configapi.DockerExecHandlerNsenter:
		dockerExecHandler = &dockertools.NsenterExecHandler{}
	}

	kubeAddressStr, kubePortStr, err := net.SplitHostPort(options.ServingInfo.BindAddress)
	if err != nil {
		return nil, fmt.Errorf("cannot parse node address: %v", err)
	}
	kubePort, err := strconv.Atoi(kubePortStr)
	if err != nil {
		return nil, fmt.Errorf("cannot parse node port: %v", err)
	}
	kubeAddress := net.ParseIP(kubeAddressStr)
	if kubeAddress == nil {
		return nil, fmt.Errorf("Invalid DNS IP: %s", kubeAddressStr)
	}

	// declare the OpenShift defaults from config
	server := kapp.NewKubeletServer()
	server.Config = path
	server.RootDirectory = options.VolumeDirectory

	// kubelet finds the node IP address by doing net.ParseIP(hostname) and if that fails,
	// it does net.LookupIP(NodeName) and picks the first non-loopback address.
	// Pass node IP as hostname to make kubelet use the desired IP address.
	if len(options.NodeIP) > 0 {
		server.HostnameOverride = options.NodeIP
	} else {
		server.HostnameOverride = options.NodeName
	}
	server.AllowPrivileged = true
	server.RegisterNode = true
	server.Address = kubeAddress
	server.Port = uint(kubePort)
	server.ReadOnlyPort = 0 // no read only access
	server.CAdvisorPort = 0 // no unsecured cadvisor access
	server.HealthzPort = 0  // no unsecured healthz access
	server.ClusterDNS = dnsIP
	server.ClusterDomain = options.DNSDomain
	server.NetworkPluginName = options.NetworkConfig.NetworkPluginName
	server.HostNetworkSources = strings.Join([]string{kubelettypes.ApiserverSource, kubelettypes.FileSource}, ",")
	server.HostPIDSources = strings.Join([]string{kubelettypes.ApiserverSource, kubelettypes.FileSource}, ",")
	server.HostIPCSources = strings.Join([]string{kubelettypes.ApiserverSource, kubelettypes.FileSource}, ",")
	server.HTTPCheckFrequency = 0 // no remote HTTP pod creation access
	server.FileCheckFrequency = time.Duration(fileCheckInterval) * time.Second
	server.PodInfraContainerImage = imageTemplate.ExpandOrDie("pod")
	server.CPUCFSQuota = true // enable cpu cfs quota enforcement by default

	// prevents kube from generating certs
	server.TLSCertFile = options.ServingInfo.ServerCert.CertFile
	server.TLSPrivateKeyFile = options.ServingInfo.ServerCert.KeyFile

	if value := cmdutil.Env("OPENSHIFT_CONTAINERIZED", ""); len(value) > 0 {
		server.Containerized = value == "true"
	}

	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubeletArguments, server.AddFlags); len(err) > 0 {
		return nil, errors.NewAggregate(err)
	}

	cfg, err := server.UnsecuredKubeletConfig()
	if err != nil {
		return nil, err
	}

	// provide any config overrides
	cfg.NodeName = options.NodeName
	cfg.StreamingConnectionIdleTimeout = 5 * time.Minute // TODO: should be set
	cfg.KubeClient = kubeClient
	cfg.DockerExecHandler = dockerExecHandler

	// Setup auth
	osClient, osClientConfig, err := configapi.GetOpenShiftClient(options.MasterKubeConfig)
	if err != nil {
		return nil, err
	}
	authnTTL, err := time.ParseDuration(options.AuthConfig.AuthenticationCacheTTL)
	if err != nil {
		return nil, err
	}
	authn, err := newAuthenticator(clientCAs, clientcmd.AnonymousClientConfig(*osClientConfig), authnTTL, options.AuthConfig.AuthenticationCacheSize)
	if err != nil {
		return nil, err
	}

	authzAttr, err := newAuthorizerAttributesGetter(options.NodeName)
	if err != nil {
		return nil, err
	}

	authzTTL, err := time.ParseDuration(options.AuthConfig.AuthorizationCacheTTL)
	if err != nil {
		return nil, err
	}
	authz, err := newAuthorizer(osClient, authzTTL, options.AuthConfig.AuthorizationCacheSize)
	if err != nil {
		return nil, err
	}

	cfg.Auth = kubelet.NewKubeletAuth(authn, authzAttr, authz)

	// Make sure the node doesn't think it is in standalone mode
	// This is required for the node to enforce nodeSelectors on pods, to set hostIP on pod status updates, etc
	cfg.StandaloneMode = false

	// TODO: could be cleaner
	if configapi.UseTLS(options.ServingInfo) {
		extraCerts, err := configapi.GetNamedCertificateMap(options.ServingInfo.NamedCertificates)
		if err != nil {
			return nil, err
		}
		cfg.TLSOptions = &kubelet.TLSOptions{
			Config: crypto.SecureTLSConfig(&tls.Config{
				// RequestClientCert lets us request certs, but allow requests without client certs
				// Verification is done by the authn layer
				ClientAuth: tls.RequestClientCert,
				ClientCAs:  clientCAs,
				// Set SNI certificate func
				// Do not use NameToCertificate, since that requires certificates be included in the server's tlsConfig.Certificates list,
				// which we do not control when running with http.Server#ListenAndServeTLS
				GetCertificate: cmdutil.GetCertificateFunc(extraCerts),
			}),
			CertFile: options.ServingInfo.ServerCert.CertFile,
			KeyFile:  options.ServingInfo.ServerCert.KeyFile,
		}
	} else {
		cfg.TLSOptions = nil
	}

	// Prepare cloud provider
	cloud, err := cloudprovider.InitCloudProvider(server.CloudProvider, server.CloudConfigFile)
	if err != nil {
		return nil, err
	}
	if cloud != nil {
		glog.V(2).Infof("Successfully initialized cloud provider: %q from the config file: %q\n", server.CloudProvider, server.CloudConfigFile)
	}
	cfg.Cloud = cloud

	config := &NodeConfig{
		BindAddress: options.ServingInfo.BindAddress,

		AllowDisabledDocker: options.AllowDisabledDocker,

		Client: kubeClient,

		VolumeDir: options.VolumeDirectory,

		KubeletServer: server,
		KubeletConfig: cfg,

		IPTablesSyncPeriod: options.IPTablesSyncPeriod,
	}

	return config, nil
}
Exemple #11
0
func BuildKubernetesNodeConfig(options configapi.NodeConfig) (*NodeConfig, error) {
	originClient, _, err := configapi.GetOpenShiftClient(options.MasterKubeConfig)
	if err != nil {
		return nil, err
	}
	kubeClient, _, err := configapi.GetKubeClient(options.MasterKubeConfig)
	if err != nil {
		return nil, err
	}
	// Make a separate client for event reporting, to avoid event QPS blocking node calls
	eventClient, _, err := configapi.GetKubeClient(options.MasterKubeConfig)
	if err != nil {
		return nil, err
	}

	if options.NodeName == "localhost" {
		glog.Warningf(`Using "localhost" as node name will not resolve from all locations`)
	}

	clientCAs, err := util.CertPoolFromFile(options.ServingInfo.ClientCA)
	if err != nil {
		return nil, err
	}

	imageTemplate := variable.NewDefaultImageTemplate()
	imageTemplate.Format = options.ImageConfig.Format
	imageTemplate.Latest = options.ImageConfig.Latest

	var path string
	var fileCheckInterval int64
	if options.PodManifestConfig != nil {
		path = options.PodManifestConfig.Path
		fileCheckInterval = options.PodManifestConfig.FileCheckIntervalSeconds
	}

	var dockerExecHandler dockertools.ExecHandler

	switch options.DockerConfig.ExecHandlerName {
	case configapi.DockerExecHandlerNative:
		dockerExecHandler = &dockertools.NativeExecHandler{}
	case configapi.DockerExecHandlerNsenter:
		dockerExecHandler = &dockertools.NsenterExecHandler{}
	}

	kubeAddressStr, kubePortStr, err := net.SplitHostPort(options.ServingInfo.BindAddress)
	if err != nil {
		return nil, fmt.Errorf("cannot parse node address: %v", err)
	}
	kubePort, err := strconv.Atoi(kubePortStr)
	if err != nil {
		return nil, fmt.Errorf("cannot parse node port: %v", err)
	}

	// declare the OpenShift defaults from config
	server := kubeletoptions.NewKubeletServer()
	server.Config = path
	server.RootDirectory = options.VolumeDirectory
	server.NodeIP = options.NodeIP
	server.HostnameOverride = options.NodeName
	server.AllowPrivileged = true
	server.RegisterNode = true
	server.Address = kubeAddressStr
	server.Port = uint(kubePort)
	server.ReadOnlyPort = 0 // no read only access
	server.CAdvisorPort = 0 // no unsecured cadvisor access
	server.HealthzPort = 0  // no unsecured healthz access
	server.ClusterDNS = options.DNSIP
	server.ClusterDomain = options.DNSDomain
	server.NetworkPluginName = options.NetworkConfig.NetworkPluginName
	server.HostNetworkSources = strings.Join([]string{kubelettypes.ApiserverSource, kubelettypes.FileSource}, ",")
	server.HostPIDSources = strings.Join([]string{kubelettypes.ApiserverSource, kubelettypes.FileSource}, ",")
	server.HostIPCSources = strings.Join([]string{kubelettypes.ApiserverSource, kubelettypes.FileSource}, ",")
	server.HTTPCheckFrequency = unversioned.Duration{Duration: time.Duration(0)} // no remote HTTP pod creation access
	server.FileCheckFrequency = unversioned.Duration{Duration: time.Duration(fileCheckInterval) * time.Second}
	server.PodInfraContainerImage = imageTemplate.ExpandOrDie("pod")
	server.CPUCFSQuota = true // enable cpu cfs quota enforcement by default
	server.MaxPods = 110

	// prevents kube from generating certs
	server.TLSCertFile = options.ServingInfo.ServerCert.CertFile
	server.TLSPrivateKeyFile = options.ServingInfo.ServerCert.KeyFile

	containerized := cmdutil.Env("OPENSHIFT_CONTAINERIZED", "") == "true"
	server.Containerized = containerized

	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubeletArguments, server.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	proxyconfig, err := buildKubeProxyConfig(options)
	if err != nil {
		return nil, err
	}

	cfg, err := kubeletapp.UnsecuredKubeletConfig(server)
	if err != nil {
		return nil, err
	}

	// Replace the standard k8s emptyDir volume plugin with a wrapper version
	// which offers XFS quota functionality, but only if the node config
	// specifies an empty dir quota to apply to projects:
	if options.VolumeConfig.LocalQuota.PerFSGroup != nil {
		glog.V(2).Info("Replacing empty-dir volume plugin with quota wrapper")
		wrappedEmptyDirPlugin := false

		quotaApplicator, err := empty_dir.NewQuotaApplicator(options.VolumeDirectory)
		if err != nil {
			return nil, err
		}

		// Create a volume spec with emptyDir we can use to search for the
		// emptyDir plugin with CanSupport:
		emptyDirSpec := &volume.Spec{
			Volume: &kapi.Volume{
				VolumeSource: kapi.VolumeSource{
					EmptyDir: &kapi.EmptyDirVolumeSource{},
				},
			},
		}

		for idx, plugin := range cfg.VolumePlugins {
			// Can't really do type checking or use a constant here as they are not exported:
			if plugin.CanSupport(emptyDirSpec) {
				wrapper := empty_dir.EmptyDirQuotaPlugin{
					Wrapped:         plugin,
					Quota:           *options.VolumeConfig.LocalQuota.PerFSGroup,
					QuotaApplicator: quotaApplicator,
				}
				cfg.VolumePlugins[idx] = &wrapper
				wrappedEmptyDirPlugin = true
			}
		}
		// Because we can't look for the k8s emptyDir plugin by any means that would
		// survive a refactor, error out if we couldn't find it:
		if !wrappedEmptyDirPlugin {
			return nil, errors.New("unable to wrap emptyDir volume plugin for quota support")
		}
	} else {
		glog.V(2).Info("Skipping replacement of empty-dir volume plugin with quota wrapper, no local fsGroup quota specified")
	}

	// provide any config overrides
	cfg.NodeName = options.NodeName
	cfg.KubeClient = internalclientset.FromUnversionedClient(kubeClient)
	cfg.EventClient = internalclientset.FromUnversionedClient(eventClient)
	cfg.DockerExecHandler = dockerExecHandler

	// docker-in-docker (dind) deployments are used for testing
	// networking plugins.  Running openshift under dind won't work
	// with the real oom adjuster due to the state of the cgroups path
	// in a dind container that uses systemd for init.  Similarly,
	// cgroup manipulation of the nested docker daemon doesn't work
	// properly under centos/rhel and should be disabled by setting
	// the name of the container to an empty string.
	//
	// This workaround should become unnecessary once user namespaces
	if value := cmdutil.Env("OPENSHIFT_DIND", ""); value == "true" {
		glog.Warningf("Using FakeOOMAdjuster for docker-in-docker compatibility")
		cfg.OOMAdjuster = oom.NewFakeOOMAdjuster()
	}

	// Setup auth
	osClient, osClientConfig, err := configapi.GetOpenShiftClient(options.MasterKubeConfig)
	if err != nil {
		return nil, err
	}
	authnTTL, err := time.ParseDuration(options.AuthConfig.AuthenticationCacheTTL)
	if err != nil {
		return nil, err
	}
	authn, err := newAuthenticator(clientCAs, clientcmd.AnonymousClientConfig(osClientConfig), authnTTL, options.AuthConfig.AuthenticationCacheSize)
	if err != nil {
		return nil, err
	}

	authzAttr, err := newAuthorizerAttributesGetter(options.NodeName)
	if err != nil {
		return nil, err
	}

	authzTTL, err := time.ParseDuration(options.AuthConfig.AuthorizationCacheTTL)
	if err != nil {
		return nil, err
	}
	authz, err := newAuthorizer(osClient, authzTTL, options.AuthConfig.AuthorizationCacheSize)
	if err != nil {
		return nil, err
	}

	cfg.Auth = kubeletserver.NewKubeletAuth(authn, authzAttr, authz)

	// Make sure the node doesn't think it is in standalone mode
	// This is required for the node to enforce nodeSelectors on pods, to set hostIP on pod status updates, etc
	cfg.StandaloneMode = false

	// TODO: could be cleaner
	if configapi.UseTLS(options.ServingInfo) {
		extraCerts, err := configapi.GetNamedCertificateMap(options.ServingInfo.NamedCertificates)
		if err != nil {
			return nil, err
		}
		cfg.TLSOptions = &kubeletserver.TLSOptions{
			Config: crypto.SecureTLSConfig(&tls.Config{
				// RequestClientCert lets us request certs, but allow requests without client certs
				// Verification is done by the authn layer
				ClientAuth: tls.RequestClientCert,
				ClientCAs:  clientCAs,
				// Set SNI certificate func
				// Do not use NameToCertificate, since that requires certificates be included in the server's tlsConfig.Certificates list,
				// which we do not control when running with http.Server#ListenAndServeTLS
				GetCertificate: cmdutil.GetCertificateFunc(extraCerts),
			}),
			CertFile: options.ServingInfo.ServerCert.CertFile,
			KeyFile:  options.ServingInfo.ServerCert.KeyFile,
		}
	} else {
		cfg.TLSOptions = nil
	}

	// Prepare cloud provider
	cloud, err := cloudprovider.InitCloudProvider(server.CloudProvider, server.CloudConfigFile)
	if err != nil {
		return nil, err
	}
	if cloud != nil {
		glog.V(2).Infof("Successfully initialized cloud provider: %q from the config file: %q\n", server.CloudProvider, server.CloudConfigFile)
	}
	cfg.Cloud = cloud

	sdnPlugin, endpointFilter, err := factory.NewPlugin(options.NetworkConfig.NetworkPluginName, originClient, kubeClient, options.NodeName, options.NodeIP)
	if err != nil {
		return nil, fmt.Errorf("SDN initialization failed: %v", err)
	}
	if sdnPlugin != nil {
		cfg.NetworkPlugins = append(cfg.NetworkPlugins, sdnPlugin)
	}

	config := &NodeConfig{
		BindAddress: options.ServingInfo.BindAddress,

		AllowDisabledDocker: options.AllowDisabledDocker,
		Containerized:       containerized,

		Client: kubeClient,

		VolumeDir: options.VolumeDirectory,

		KubeletServer: server,
		KubeletConfig: cfg,

		ProxyConfig: proxyconfig,

		MTU: options.NetworkConfig.MTU,

		SDNPlugin:                 sdnPlugin,
		FilteringEndpointsHandler: endpointFilter,
	}

	return config, nil
}
Exemple #12
0
func BuildKubernetesNodeConfig(options configapi.NodeConfig) (*NodeConfig, error) {
	originClient, osClientConfig, err := configapi.GetOpenShiftClient(options.MasterKubeConfig)
	if err != nil {
		return nil, err
	}
	kubeClient, _, err := configapi.GetKubeClient(options.MasterKubeConfig)
	if err != nil {
		return nil, err
	}
	// Make a separate client for event reporting, to avoid event QPS blocking node calls
	eventClient, _, err := configapi.GetKubeClient(options.MasterKubeConfig)
	if err != nil {
		return nil, err
	}

	if options.NodeName == "localhost" {
		glog.Warningf(`Using "localhost" as node name will not resolve from all locations`)
	}

	clientCAs, err := kcrypto.CertPoolFromFile(options.ServingInfo.ClientCA)
	if err != nil {
		return nil, err
	}

	imageTemplate := variable.NewDefaultImageTemplate()
	imageTemplate.Format = options.ImageConfig.Format
	imageTemplate.Latest = options.ImageConfig.Latest

	var path string
	var fileCheckInterval int64
	if options.PodManifestConfig != nil {
		path = options.PodManifestConfig.Path
		fileCheckInterval = options.PodManifestConfig.FileCheckIntervalSeconds
	}

	var dockerExecHandler dockertools.ExecHandler

	switch options.DockerConfig.ExecHandlerName {
	case configapi.DockerExecHandlerNative:
		dockerExecHandler = &dockertools.NativeExecHandler{}
	case configapi.DockerExecHandlerNsenter:
		dockerExecHandler = &dockertools.NsenterExecHandler{}
	}

	kubeAddressStr, kubePortStr, err := net.SplitHostPort(options.ServingInfo.BindAddress)
	if err != nil {
		return nil, fmt.Errorf("cannot parse node address: %v", err)
	}
	kubePort, err := strconv.Atoi(kubePortStr)
	if err != nil {
		return nil, fmt.Errorf("cannot parse node port: %v", err)
	}

	// Defaults are tested in TestKubeletDefaults
	server := kubeletoptions.NewKubeletServer()
	// Adjust defaults
	server.Config = path
	server.RootDirectory = options.VolumeDirectory
	server.NodeIP = options.NodeIP
	server.HostnameOverride = options.NodeName
	server.AllowPrivileged = true
	server.RegisterNode = true
	server.Address = kubeAddressStr
	server.Port = uint(kubePort)
	server.ReadOnlyPort = 0        // no read only access
	server.CAdvisorPort = 0        // no unsecured cadvisor access
	server.HealthzPort = 0         // no unsecured healthz access
	server.HealthzBindAddress = "" // no unsecured healthz access
	server.ClusterDNS = options.DNSIP
	server.ClusterDomain = options.DNSDomain
	server.NetworkPluginName = options.NetworkConfig.NetworkPluginName
	server.HostNetworkSources = strings.Join([]string{kubelettypes.ApiserverSource, kubelettypes.FileSource}, ",")
	server.HostPIDSources = strings.Join([]string{kubelettypes.ApiserverSource, kubelettypes.FileSource}, ",")
	server.HostIPCSources = strings.Join([]string{kubelettypes.ApiserverSource, kubelettypes.FileSource}, ",")
	server.HTTPCheckFrequency = unversioned.Duration{Duration: time.Duration(0)} // no remote HTTP pod creation access
	server.FileCheckFrequency = unversioned.Duration{Duration: time.Duration(fileCheckInterval) * time.Second}
	server.PodInfraContainerImage = imageTemplate.ExpandOrDie("pod")
	server.CPUCFSQuota = true // enable cpu cfs quota enforcement by default
	server.MaxPods = 110
	server.SerializeImagePulls = false // disable serial image pulls by default

	switch server.NetworkPluginName {
	case ovs.SingleTenantPluginName, ovs.MultiTenantPluginName:
		// set defaults for openshift-sdn
		server.HairpinMode = componentconfig.HairpinNone
		server.ConfigureCBR0 = false
	}

	// prevents kube from generating certs
	server.TLSCertFile = options.ServingInfo.ServerCert.CertFile
	server.TLSPrivateKeyFile = options.ServingInfo.ServerCert.KeyFile

	containerized := cmdutil.Env("OPENSHIFT_CONTAINERIZED", "") == "true"
	server.Containerized = containerized

	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubeletArguments, server.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	proxyconfig, err := buildKubeProxyConfig(options)
	if err != nil {
		return nil, err
	}

	cfg, err := kubeletapp.UnsecuredKubeletConfig(server)
	if err != nil {
		return nil, err
	}

	// provide any config overrides
	cfg.NodeName = options.NodeName
	cfg.KubeClient = clientadapter.FromUnversionedClient(kubeClient)
	cfg.EventClient = clientadapter.FromUnversionedClient(eventClient)
	cfg.DockerExecHandler = dockerExecHandler

	// Setup auth
	authnTTL, err := time.ParseDuration(options.AuthConfig.AuthenticationCacheTTL)
	if err != nil {
		return nil, err
	}
	authn, err := newAuthenticator(clientCAs, clientcmd.AnonymousClientConfig(osClientConfig), authnTTL, options.AuthConfig.AuthenticationCacheSize)
	if err != nil {
		return nil, err
	}

	authzAttr, err := newAuthorizerAttributesGetter(options.NodeName)
	if err != nil {
		return nil, err
	}

	authzTTL, err := time.ParseDuration(options.AuthConfig.AuthorizationCacheTTL)
	if err != nil {
		return nil, err
	}
	authz, err := newAuthorizer(originClient, authzTTL, options.AuthConfig.AuthorizationCacheSize)
	if err != nil {
		return nil, err
	}

	cfg.Auth = kubeletserver.NewKubeletAuth(authn, authzAttr, authz)

	// Make sure the node doesn't think it is in standalone mode
	// This is required for the node to enforce nodeSelectors on pods, to set hostIP on pod status updates, etc
	cfg.StandaloneMode = false

	// TODO: could be cleaner
	if configapi.UseTLS(options.ServingInfo) {
		extraCerts, err := configapi.GetNamedCertificateMap(options.ServingInfo.NamedCertificates)
		if err != nil {
			return nil, err
		}
		cfg.TLSOptions = &kubeletserver.TLSOptions{
			Config: crypto.SecureTLSConfig(&tls.Config{
				// RequestClientCert lets us request certs, but allow requests without client certs
				// Verification is done by the authn layer
				ClientAuth: tls.RequestClientCert,
				ClientCAs:  clientCAs,
				// Set SNI certificate func
				// Do not use NameToCertificate, since that requires certificates be included in the server's tlsConfig.Certificates list,
				// which we do not control when running with http.Server#ListenAndServeTLS
				GetCertificate: cmdutil.GetCertificateFunc(extraCerts),
			}),
			CertFile: options.ServingInfo.ServerCert.CertFile,
			KeyFile:  options.ServingInfo.ServerCert.KeyFile,
		}
	} else {
		cfg.TLSOptions = nil
	}

	// Prepare cloud provider
	cloud, err := cloudprovider.InitCloudProvider(server.CloudProvider, server.CloudConfigFile)
	if err != nil {
		return nil, err
	}
	if cloud != nil {
		glog.V(2).Infof("Successfully initialized cloud provider: %q from the config file: %q\n", server.CloudProvider, server.CloudConfigFile)
	}
	cfg.Cloud = cloud

	sdnPlugin, err := factory.NewNodePlugin(options.NetworkConfig.NetworkPluginName, originClient, kubeClient, options.NodeName, options.NodeIP)
	if err != nil {
		return nil, fmt.Errorf("SDN initialization failed: %v", err)
	}
	if sdnPlugin != nil {
		cfg.NetworkPlugins = append(cfg.NetworkPlugins, sdnPlugin)
	}

	endpointFilter, err := factory.NewProxyPlugin(options.NetworkConfig.NetworkPluginName, originClient, kubeClient)
	if err != nil {
		return nil, fmt.Errorf("SDN proxy initialization failed: %v", err)
	}

	config := &NodeConfig{
		BindAddress: options.ServingInfo.BindAddress,

		AllowDisabledDocker: options.AllowDisabledDocker,
		Containerized:       containerized,

		Client: kubeClient,

		VolumeDir: options.VolumeDirectory,

		KubeletServer: server,
		KubeletConfig: cfg,

		ProxyConfig: proxyconfig,

		MTU: options.NetworkConfig.MTU,

		SDNPlugin:                 sdnPlugin,
		FilteringEndpointsHandler: endpointFilter,
	}

	return config, nil
}
// BuildDefaultAPIServer constructs the appropriate APIServer and StorageFactory for the kubernetes server.
// It returns an error if no KubernetesMasterConfig was defined.
func BuildDefaultAPIServer(options configapi.MasterConfig) (*apiserveroptions.APIServer, genericapiserver.StorageFactory, error) {
	if options.KubernetesMasterConfig == nil {
		return nil, nil, fmt.Errorf("no kubernetesMasterConfig defined, unable to load settings")
	}
	_, portString, err := net.SplitHostPort(options.ServingInfo.BindAddress)
	if err != nil {
		return nil, nil, err
	}
	port, err := strconv.Atoi(portString)
	if err != nil {
		return nil, nil, err
	}

	portRange, err := knet.ParsePortRange(options.KubernetesMasterConfig.ServicesNodePortRange)
	if err != nil {
		return nil, nil, err
	}

	// Defaults are tested in TestAPIServerDefaults
	server := apiserveroptions.NewAPIServer()
	// Adjust defaults
	server.EventTTL = 2 * time.Hour
	server.ServiceClusterIPRange = net.IPNet(flagtypes.DefaultIPNet(options.KubernetesMasterConfig.ServicesSubnet))
	server.ServiceNodePortRange = *portRange
	server.EnableLogsSupport = false // don't expose server logs
	server.EnableProfiling = false
	server.APIPrefix = KubeAPIPrefix
	server.APIGroupPrefix = KubeAPIGroupPrefix
	server.SecurePort = port
	server.MasterCount = options.KubernetesMasterConfig.MasterCount

	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubernetesMasterConfig.APIServerArguments, server.AddFlags); len(err) > 0 {
		return nil, nil, kerrors.NewAggregate(err)
	}

	resourceEncodingConfig := genericapiserver.NewDefaultResourceEncodingConfig()
	resourceEncodingConfig.SetVersionEncoding(
		kapi.GroupName,
		unversioned.GroupVersion{Group: kapi.GroupName, Version: options.EtcdStorageConfig.KubernetesStorageVersion},
		kapi.SchemeGroupVersion,
	)

	resourceEncodingConfig.SetVersionEncoding(
		extensions.GroupName,
		unversioned.GroupVersion{Group: extensions.GroupName, Version: "v1beta1"},
		extensions.SchemeGroupVersion,
	)

	resourceEncodingConfig.SetVersionEncoding(
		batch.GroupName,
		unversioned.GroupVersion{Group: batch.GroupName, Version: "v1"},
		batch.SchemeGroupVersion,
	)

	resourceEncodingConfig.SetVersionEncoding(
		autoscaling.GroupName,
		unversioned.GroupVersion{Group: autoscaling.GroupName, Version: "v1"},
		autoscaling.SchemeGroupVersion,
	)

	storageGroupsToEncodingVersion, err := server.StorageGroupsToEncodingVersion()
	if err != nil {
		return nil, nil, err
	}

	// use the stock storage config based on args, but override bits from our config where appropriate
	etcdConfig := server.StorageConfig
	etcdConfig.Prefix = options.EtcdStorageConfig.KubernetesStoragePrefix
	etcdConfig.ServerList = options.EtcdClientInfo.URLs
	etcdConfig.KeyFile = options.EtcdClientInfo.ClientCert.KeyFile
	etcdConfig.CertFile = options.EtcdClientInfo.ClientCert.CertFile
	etcdConfig.CAFile = options.EtcdClientInfo.CA

	storageFactory, err := genericapiserver.BuildDefaultStorageFactory(
		etcdConfig,
		server.DefaultStorageMediaType,
		kapi.Codecs,
		genericapiserver.NewDefaultResourceEncodingConfig(),
		storageGroupsToEncodingVersion,
		// FIXME: this GroupVersionResource override should be configurable
		[]unversioned.GroupVersionResource{batch.Resource("scheduledjobs").WithVersion("v2alpha1")},
		master.DefaultAPIResourceConfigSource(), server.RuntimeConfig,
	)
	if err != nil {
		return nil, nil, err
	}

	/*storageFactory := genericapiserver.NewDefaultStorageFactory(
		etcdConfig,
		server.DefaultStorageMediaType,
		kapi.Codecs,
		resourceEncodingConfig,
		master.DefaultAPIResourceConfigSource(),
	)*/
	// the order here is important, it defines which version will be used for storage
	storageFactory.AddCohabitatingResources(extensions.Resource("jobs"), batch.Resource("jobs"))
	storageFactory.AddCohabitatingResources(extensions.Resource("horizontalpodautoscalers"), autoscaling.Resource("horizontalpodautoscalers"))

	return server, storageFactory, nil
}
func BuildKubernetesMasterConfig(options configapi.MasterConfig, requestContextMapper kapi.RequestContextMapper, kubeClient *kclient.Client, informers shared.InformerFactory, admissionControl admission.Interface, originAuthenticator authenticator.Request) (*MasterConfig, error) {
	if options.KubernetesMasterConfig == nil {
		return nil, errors.New("insufficient information to build KubernetesMasterConfig")
	}

	kubeletClientConfig := configapi.GetKubeletClientConfig(options)
	kubeletClient, err := kubeletclient.NewStaticKubeletClient(kubeletClientConfig)
	if err != nil {
		return nil, fmt.Errorf("unable to configure Kubelet client: %v", err)
	}

	// in-order list of plug-ins that should intercept admission decisions
	// TODO: Push node environment support to upstream in future

	podEvictionTimeout, err := time.ParseDuration(options.KubernetesMasterConfig.PodEvictionTimeout)
	if err != nil {
		return nil, fmt.Errorf("unable to parse PodEvictionTimeout: %v", err)
	}

	// Defaults are tested in TestCMServerDefaults
	cmserver := cmapp.NewCMServer()
	// Adjust defaults
	cmserver.Address = ""                   // no healthz endpoint
	cmserver.Port = 0                       // no healthz endpoint
	cmserver.EnableGarbageCollector = false // disabled until we add the controller
	cmserver.PodEvictionTimeout = unversioned.Duration{Duration: podEvictionTimeout}
	cmserver.VolumeConfiguration.EnableDynamicProvisioning = options.VolumeConfig.DynamicProvisioningEnabled

	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubernetesMasterConfig.ControllerArguments, cmserver.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	schedulerserver := scheduleroptions.NewSchedulerServer()
	schedulerserver.PolicyConfigFile = options.KubernetesMasterConfig.SchedulerConfigFile
	if err := cmdflags.Resolve(options.KubernetesMasterConfig.SchedulerArguments, schedulerserver.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	cloud, err := cloudprovider.InitCloudProvider(cmserver.CloudProvider, cmserver.CloudConfigFile)
	if err != nil {
		return nil, err
	}
	if cloud != nil {
		glog.V(2).Infof("Successfully initialized cloud provider: %q from the config file: %q\n", cmserver.CloudProvider, cmserver.CloudConfigFile)
	}

	var proxyClientCerts []tls.Certificate
	if len(options.KubernetesMasterConfig.ProxyClientInfo.CertFile) > 0 {
		clientCert, err := tls.LoadX509KeyPair(
			options.KubernetesMasterConfig.ProxyClientInfo.CertFile,
			options.KubernetesMasterConfig.ProxyClientInfo.KeyFile,
		)
		if err != nil {
			return nil, err
		}
		proxyClientCerts = append(proxyClientCerts, clientCert)
	}

	server, storageFactory, err := BuildDefaultAPIServer(options)
	if err != nil {
		return nil, err
	}

	// Preserve previous behavior of using the first non-loopback address
	// TODO: Deprecate this behavior and just require a valid value to be passed in
	publicAddress := net.ParseIP(options.KubernetesMasterConfig.MasterIP)
	if publicAddress == nil || publicAddress.IsUnspecified() || publicAddress.IsLoopback() {
		hostIP, err := knet.ChooseHostInterface()
		if err != nil {
			glog.Fatalf("Unable to find suitable network address.error='%v'. Set the masterIP directly to avoid this error.", err)
		}
		publicAddress = hostIP
		glog.Infof("Will report %v as public IP address.", publicAddress)
	}

	m := &master.Config{
		Config: &genericapiserver.Config{

			PublicAddress: publicAddress,
			ReadWritePort: server.SecurePort,

			Authenticator:    originAuthenticator, // this is used to fulfill the tokenreviews endpoint which is used by node authentication
			Authorizer:       authorizer.NewAlwaysAllowAuthorizer(),
			AdmissionControl: admissionControl,

			StorageFactory: storageFactory,

			ServiceClusterIPRange: (*net.IPNet)(&server.ServiceClusterIPRange),
			ServiceNodePortRange:  server.ServiceNodePortRange,

			RequestContextMapper: requestContextMapper,

			APIResourceConfigSource: getAPIResourceConfig(options),
			APIPrefix:               server.APIPrefix,
			APIGroupPrefix:          server.APIGroupPrefix,

			MasterCount: server.MasterCount,

			// Set the TLS options for proxying to pods and services
			// Proxying to nodes uses the kubeletClient TLS config (so can provide a different cert, and verify the node hostname)
			ProxyTLSClientConfig: &tls.Config{
				// Proxying to pods and services cannot verify hostnames, since they are contacted on randomly allocated IPs
				InsecureSkipVerify: true,
				Certificates:       proxyClientCerts,
			},

			Serializer: kapi.Codecs,

			EnableLogsSupport:         server.EnableLogsSupport,
			EnableProfiling:           server.EnableProfiling,
			EnableWatchCache:          server.EnableWatchCache,
			MasterServiceNamespace:    server.MasterServiceNamespace,
			ExternalHost:              server.ExternalHost,
			MinRequestTimeout:         server.MinRequestTimeout,
			KubernetesServiceNodePort: server.KubernetesServiceNodePort,
		},

		EventTTL: server.EventTTL,

		KubeletClient: kubeletClient,

		EnableCoreControllers: true,

		DeleteCollectionWorkers: server.DeleteCollectionWorkers,
	}

	if server.EnableWatchCache {
		cachesize.SetWatchCacheSizes(server.WatchCacheSizes)
	}

	if options.DNSConfig != nil {
		_, dnsPortStr, err := net.SplitHostPort(options.DNSConfig.BindAddress)
		if err != nil {
			return nil, fmt.Errorf("unable to parse DNS bind address %s: %v", options.DNSConfig.BindAddress, err)
		}
		dnsPort, err := strconv.Atoi(dnsPortStr)
		if err != nil {
			return nil, fmt.Errorf("invalid DNS port: %v", err)
		}
		m.ExtraServicePorts = append(m.ExtraServicePorts,
			kapi.ServicePort{Name: "dns", Port: 53, Protocol: kapi.ProtocolUDP, TargetPort: intstr.FromInt(dnsPort)},
			kapi.ServicePort{Name: "dns-tcp", Port: 53, Protocol: kapi.ProtocolTCP, TargetPort: intstr.FromInt(dnsPort)},
		)
		m.ExtraEndpointPorts = append(m.ExtraEndpointPorts,
			kapi.EndpointPort{Name: "dns", Port: int32(dnsPort), Protocol: kapi.ProtocolUDP},
			kapi.EndpointPort{Name: "dns-tcp", Port: int32(dnsPort), Protocol: kapi.ProtocolTCP},
		)
	}

	kmaster := &MasterConfig{
		Options:    *options.KubernetesMasterConfig,
		KubeClient: kubeClient,

		Master:            m,
		ControllerManager: cmserver,
		CloudProvider:     cloud,
		SchedulerServer:   schedulerserver,
		Informers:         informers,
	}

	return kmaster, nil
}
func BuildKubernetesMasterConfig(options configapi.MasterConfig, requestContextMapper kapi.RequestContextMapper, kubeClient *kclient.Client) (*MasterConfig, error) {
	if options.KubernetesMasterConfig == nil {
		return nil, errors.New("insufficient information to build KubernetesMasterConfig")
	}

	// Connect and setup etcd interfaces
	etcdClient, err := etcd.GetAndTestEtcdClient(options.EtcdClientInfo)
	if err != nil {
		return nil, err
	}
	databaseStorage, err := master.NewEtcdStorage(etcdClient, kapilatest.InterfacesFor, options.EtcdStorageConfig.KubernetesStorageVersion, options.EtcdStorageConfig.KubernetesStoragePrefix)
	if err != nil {
		return nil, fmt.Errorf("Error setting up Kubernetes server storage: %v", err)
	}

	kubeletClientConfig := configapi.GetKubeletClientConfig(options)
	kubeletClient, err := kclient.NewKubeletClient(kubeletClientConfig)
	if err != nil {
		return nil, fmt.Errorf("unable to configure Kubelet client: %v", err)
	}

	// in-order list of plug-ins that should intercept admission decisions
	// TODO: Push node environment support to upstream in future

	_, portString, err := net.SplitHostPort(options.ServingInfo.BindAddress)
	if err != nil {
		return nil, err
	}
	port, err := strconv.Atoi(portString)
	if err != nil {
		return nil, err
	}

	portRange, err := util.ParsePortRange(options.KubernetesMasterConfig.ServicesNodePortRange)
	if err != nil {
		return nil, err
	}

	podEvictionTimeout, err := time.ParseDuration(options.KubernetesMasterConfig.PodEvictionTimeout)
	if err != nil {
		return nil, fmt.Errorf("unable to parse PodEvictionTimeout: %v", err)
	}

	server := app.NewAPIServer()
	server.EventTTL = 2 * time.Hour
	server.ServiceClusterIPRange = util.IPNet(flagtypes.DefaultIPNet(options.KubernetesMasterConfig.ServicesSubnet))
	server.ServiceNodePortRange = *portRange
	server.AdmissionControl = strings.Join([]string{
		"NamespaceExists", "NamespaceLifecycle", "OriginPodNodeEnvironment", "LimitRanger", "ServiceAccount", "SecurityContextConstraint", "ResourceQuota",
	}, ",")

	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubernetesMasterConfig.APIServerArguments, server.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	cmserver := cmapp.NewCMServer()
	cmserver.PodEvictionTimeout = podEvictionTimeout
	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubernetesMasterConfig.ControllerArguments, cmserver.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	cloud, err := cloudprovider.InitCloudProvider(cmserver.CloudProvider, cmserver.CloudConfigFile)
	if err != nil {
		return nil, err
	}

	admissionController := admission.NewFromPlugins(kubeClient, strings.Split(server.AdmissionControl, ","), server.AdmissionControlConfigFile)

	m := &master.Config{
		PublicAddress: net.ParseIP(options.KubernetesMasterConfig.MasterIP),
		ReadWritePort: port,

		DatabaseStorage:    databaseStorage,
		ExpDatabaseStorage: databaseStorage,

		EventTTL: server.EventTTL,
		//MinRequestTimeout: server.MinRequestTimeout,

		ServiceClusterIPRange: (*net.IPNet)(&server.ServiceClusterIPRange),
		ServiceNodePortRange:  server.ServiceNodePortRange,

		RequestContextMapper: requestContextMapper,

		KubeletClient: kubeletClient,
		APIPrefix:     KubeAPIPrefix,

		EnableCoreControllers: true,

		MasterCount: options.KubernetesMasterConfig.MasterCount,

		Authorizer:       apiserver.NewAlwaysAllowAuthorizer(),
		AdmissionControl: admissionController,

		EnableV1Beta3: configapi.HasKubernetesAPILevel(*options.KubernetesMasterConfig, "v1beta3"),
		DisableV1:     !configapi.HasKubernetesAPILevel(*options.KubernetesMasterConfig, "v1"),
	}

	kmaster := &MasterConfig{
		Options:    *options.KubernetesMasterConfig,
		KubeClient: kubeClient,

		Master:            m,
		ControllerManager: cmserver,
		CloudProvider:     cloud,
	}

	return kmaster, nil
}
Exemple #16
0
func BuildKubernetesMasterConfig(options configapi.MasterConfig, requestContextMapper kapi.RequestContextMapper, kubeClient *kclient.Client, informers shared.InformerFactory, pluginInitializer oadmission.PluginInitializer) (*MasterConfig, error) {
	if options.KubernetesMasterConfig == nil {
		return nil, errors.New("insufficient information to build KubernetesMasterConfig")
	}

	kubeletClientConfig := configapi.GetKubeletClientConfig(options)
	kubeletClient, err := kubeletclient.NewStaticKubeletClient(kubeletClientConfig)
	if err != nil {
		return nil, fmt.Errorf("unable to configure Kubelet client: %v", err)
	}

	// in-order list of plug-ins that should intercept admission decisions
	// TODO: Push node environment support to upstream in future

	_, portString, err := net.SplitHostPort(options.ServingInfo.BindAddress)
	if err != nil {
		return nil, err
	}
	port, err := strconv.Atoi(portString)
	if err != nil {
		return nil, err
	}

	portRange, err := knet.ParsePortRange(options.KubernetesMasterConfig.ServicesNodePortRange)
	if err != nil {
		return nil, err
	}

	podEvictionTimeout, err := time.ParseDuration(options.KubernetesMasterConfig.PodEvictionTimeout)
	if err != nil {
		return nil, fmt.Errorf("unable to parse PodEvictionTimeout: %v", err)
	}

	// Defaults are tested in TestAPIServerDefaults
	server := apiserveroptions.NewAPIServer()
	// Adjust defaults
	server.EventTTL = 2 * time.Hour
	server.ServiceClusterIPRange = net.IPNet(flagtypes.DefaultIPNet(options.KubernetesMasterConfig.ServicesSubnet))
	server.ServiceNodePortRange = *portRange
	server.AdmissionControl = strings.Join(AdmissionPlugins, ",")
	server.EnableLogsSupport = false // don't expose server logs
	server.EnableProfiling = false
	server.APIPrefix = KubeAPIPrefix
	server.APIGroupPrefix = KubeAPIGroupPrefix
	server.SecurePort = port
	server.MasterCount = options.KubernetesMasterConfig.MasterCount

	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubernetesMasterConfig.APIServerArguments, server.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	if len(options.KubernetesMasterConfig.AdmissionConfig.PluginOrderOverride) > 0 {
		server.AdmissionControl = strings.Join(options.KubernetesMasterConfig.AdmissionConfig.PluginOrderOverride, ",")
	}

	// Defaults are tested in TestCMServerDefaults
	cmserver := cmapp.NewCMServer()
	// Adjust defaults
	cmserver.Address = "" // no healthz endpoint
	cmserver.Port = 0     // no healthz endpoint
	cmserver.PodEvictionTimeout = unversioned.Duration{Duration: podEvictionTimeout}
	cmserver.VolumeConfiguration.EnableDynamicProvisioning = options.VolumeConfig.DynamicProvisioningEnabled

	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubernetesMasterConfig.ControllerArguments, cmserver.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	cloud, err := cloudprovider.InitCloudProvider(cmserver.CloudProvider, cmserver.CloudConfigFile)
	if err != nil {
		return nil, err
	}
	if cloud != nil {
		glog.V(2).Infof("Successfully initialized cloud provider: %q from the config file: %q\n", server.CloudProvider, server.CloudConfigFile)
	}

	plugins := []admission.Interface{}
	for _, pluginName := range strings.Split(server.AdmissionControl, ",") {
		switch pluginName {
		case lifecycle.PluginName:
			// We need to include our infrastructure and shared resource namespaces in the immortal namespaces list
			immortalNamespaces := sets.NewString(kapi.NamespaceDefault)
			if len(options.PolicyConfig.OpenShiftSharedResourcesNamespace) > 0 {
				immortalNamespaces.Insert(options.PolicyConfig.OpenShiftSharedResourcesNamespace)
			}
			if len(options.PolicyConfig.OpenShiftInfrastructureNamespace) > 0 {
				immortalNamespaces.Insert(options.PolicyConfig.OpenShiftInfrastructureNamespace)
			}
			plugins = append(plugins, lifecycle.NewLifecycle(clientadapter.FromUnversionedClient(kubeClient), immortalNamespaces))

		case serviceadmit.ExternalIPPluginName:
			// this needs to be moved upstream to be part of core config
			reject, admit, err := serviceadmit.ParseCIDRRules(options.NetworkConfig.ExternalIPNetworkCIDRs)
			if err != nil {
				// should have been caught with validation
				return nil, err
			}
			plugins = append(plugins, serviceadmit.NewExternalIPRanger(reject, admit))
		case saadmit.PluginName:
			// we need to set some custom parameters on the service account admission controller, so create that one by hand
			saAdmitter := saadmit.NewServiceAccount(clientadapter.FromUnversionedClient(kubeClient))
			saAdmitter.LimitSecretReferences = options.ServiceAccountConfig.LimitSecretReferences
			saAdmitter.Run()
			plugins = append(plugins, saAdmitter)

		default:
			configFile, err := pluginconfig.GetPluginConfigFile(options.KubernetesMasterConfig.AdmissionConfig.PluginConfig, pluginName, server.AdmissionControlConfigFile)
			if err != nil {
				return nil, err
			}
			plugin := admission.InitPlugin(pluginName, clientadapter.FromUnversionedClient(kubeClient), configFile)
			if plugin != nil {
				plugins = append(plugins, plugin)
			}

		}
	}
	pluginInitializer.Initialize(plugins)
	// ensure that plugins have been properly initialized
	if err := oadmission.Validate(plugins); err != nil {
		return nil, err
	}
	admissionController := admission.NewChainHandler(plugins...)

	var proxyClientCerts []tls.Certificate
	if len(options.KubernetesMasterConfig.ProxyClientInfo.CertFile) > 0 {
		clientCert, err := tls.LoadX509KeyPair(
			options.KubernetesMasterConfig.ProxyClientInfo.CertFile,
			options.KubernetesMasterConfig.ProxyClientInfo.KeyFile,
		)
		if err != nil {
			return nil, err
		}
		proxyClientCerts = append(proxyClientCerts, clientCert)
	}

	resourceEncodingConfig := genericapiserver.NewDefaultResourceEncodingConfig()
	resourceEncodingConfig.SetVersionEncoding(
		kapi.GroupName,
		unversioned.GroupVersion{Group: kapi.GroupName, Version: options.EtcdStorageConfig.KubernetesStorageVersion},
		kapi.SchemeGroupVersion,
	)

	resourceEncodingConfig.SetVersionEncoding(
		extensions.GroupName,
		unversioned.GroupVersion{Group: extensions.GroupName, Version: "v1beta1"},
		extensions.SchemeGroupVersion,
	)

	resourceEncodingConfig.SetVersionEncoding(
		batch.GroupName,
		unversioned.GroupVersion{Group: batch.GroupName, Version: "v1"},
		batch.SchemeGroupVersion,
	)

	resourceEncodingConfig.SetVersionEncoding(
		autoscaling.GroupName,
		unversioned.GroupVersion{Group: autoscaling.GroupName, Version: "v1"},
		autoscaling.SchemeGroupVersion,
	)

	etcdConfig := storagebackend.Config{
		Prefix:     options.EtcdStorageConfig.KubernetesStoragePrefix,
		ServerList: options.EtcdClientInfo.URLs,
		KeyFile:    options.EtcdClientInfo.ClientCert.KeyFile,
		CertFile:   options.EtcdClientInfo.ClientCert.CertFile,
		CAFile:     options.EtcdClientInfo.CA,
		DeserializationCacheSize: genericapiserveroptions.DefaultDeserializationCacheSize,
	}
	storageFactory := genericapiserver.NewDefaultStorageFactory(etcdConfig, "", kapi.Codecs, resourceEncodingConfig, master.DefaultAPIResourceConfigSource())
	// the order here is important, it defines which version will be used for storage
	storageFactory.AddCohabitatingResources(extensions.Resource("jobs"), batch.Resource("jobs"))
	storageFactory.AddCohabitatingResources(extensions.Resource("horizontalpodautoscalers"), autoscaling.Resource("horizontalpodautoscalers"))

	// Preserve previous behavior of using the first non-loopback address
	// TODO: Deprecate this behavior and just require a valid value to be passed in
	publicAddress := net.ParseIP(options.KubernetesMasterConfig.MasterIP)
	if publicAddress == nil || publicAddress.IsUnspecified() || publicAddress.IsLoopback() {
		hostIP, err := knet.ChooseHostInterface()
		if err != nil {
			glog.Fatalf("Unable to find suitable network address.error='%v'. Set the masterIP directly to avoid this error.", err)
		}
		publicAddress = hostIP
		glog.Infof("Will report %v as public IP address.", publicAddress)
	}

	m := &master.Config{
		Config: &genericapiserver.Config{

			PublicAddress: publicAddress,
			ReadWritePort: port,

			Authorizer:       apiserver.NewAlwaysAllowAuthorizer(),
			AdmissionControl: admissionController,

			StorageFactory: storageFactory,

			ServiceClusterIPRange: (*net.IPNet)(&server.ServiceClusterIPRange),
			ServiceNodePortRange:  server.ServiceNodePortRange,

			RequestContextMapper: requestContextMapper,

			APIResourceConfigSource: getAPIResourceConfig(options),
			APIPrefix:               server.APIPrefix,
			APIGroupPrefix:          server.APIGroupPrefix,

			MasterCount: server.MasterCount,

			// Set the TLS options for proxying to pods and services
			// Proxying to nodes uses the kubeletClient TLS config (so can provide a different cert, and verify the node hostname)
			ProxyTLSClientConfig: &tls.Config{
				// Proxying to pods and services cannot verify hostnames, since they are contacted on randomly allocated IPs
				InsecureSkipVerify: true,
				Certificates:       proxyClientCerts,
			},

			Serializer: kapi.Codecs,

			EnableLogsSupport:         server.EnableLogsSupport,
			EnableProfiling:           server.EnableProfiling,
			EnableWatchCache:          server.EnableWatchCache,
			MasterServiceNamespace:    server.MasterServiceNamespace,
			ExternalHost:              server.ExternalHost,
			MinRequestTimeout:         server.MinRequestTimeout,
			KubernetesServiceNodePort: server.KubernetesServiceNodePort,
		},

		EventTTL: server.EventTTL,

		KubeletClient: kubeletClient,

		EnableCoreControllers: true,

		DeleteCollectionWorkers: server.DeleteCollectionWorkers,
	}

	if server.EnableWatchCache {
		cachesize.SetWatchCacheSizes(server.WatchCacheSizes)
	}

	if options.DNSConfig != nil {
		_, dnsPortStr, err := net.SplitHostPort(options.DNSConfig.BindAddress)
		if err != nil {
			return nil, fmt.Errorf("unable to parse DNS bind address %s: %v", options.DNSConfig.BindAddress, err)
		}
		dnsPort, err := strconv.Atoi(dnsPortStr)
		if err != nil {
			return nil, fmt.Errorf("invalid DNS port: %v", err)
		}
		m.ExtraServicePorts = append(m.ExtraServicePorts,
			kapi.ServicePort{Name: "dns", Port: 53, Protocol: kapi.ProtocolUDP, TargetPort: intstr.FromInt(dnsPort)},
			kapi.ServicePort{Name: "dns-tcp", Port: 53, Protocol: kapi.ProtocolTCP, TargetPort: intstr.FromInt(dnsPort)},
		)
		m.ExtraEndpointPorts = append(m.ExtraEndpointPorts,
			kapi.EndpointPort{Name: "dns", Port: int32(dnsPort), Protocol: kapi.ProtocolUDP},
			kapi.EndpointPort{Name: "dns-tcp", Port: int32(dnsPort), Protocol: kapi.ProtocolTCP},
		)
	}

	kmaster := &MasterConfig{
		Options:    *options.KubernetesMasterConfig,
		KubeClient: kubeClient,

		Master:            m,
		ControllerManager: cmserver,
		CloudProvider:     cloud,
		Informers:         informers,
	}

	return kmaster, nil
}