func (f *Font) DrawText2D(x int, y int, color [3]byte, scale float, txt string) (endw int, endh int) {
gl.LoadIdentity()
// gl.Translatef(0.0, 0.0, -2.0);
glEnable2D()
gl.Disable(gl.DEPTH_TEST)
texture, initial, intermediarya, intermediary, w, h := f.setupTextRendering(color, txt)
locX := gl.GLfloat(x)
locY := gl.GLfloat(y)
wi := gl.GLfloat(w) * gl.GLfloat(scale)
he := gl.GLfloat(h) * gl.GLfloat(scale)
/* Draw a quad at location */
gl.Begin(gl.QUADS)
/* Recall that the origin is in the lower-left corner
That is why the TexCoords specify different corners
than the Vertex coors seem to. */
gl.TexCoord2f(0.0, 1.0)
gl.Vertex2f(locX, locY)
gl.TexCoord2f(1.0, 1.0)
gl.Vertex2f(locX+wi, locY)
gl.TexCoord2f(1.0, 0.0)
gl.Vertex2f(locX+wi, locY+he)
gl.TexCoord2f(0.0, 0.0)
gl.Vertex2f(locX, locY+he)
gl.End()
endw, endh = f.teardownTextRendering(texture, initial, intermediarya, intermediary)
gl.Enable(gl.DEPTH_TEST)
glDisable2D()
return
}
// handle key press events
func handleKeyPress(keysym sdl.Keysym) {
switch keysym.Sym {
case sdl.K_f: // f key pages through filters
filter = (filter + 1) % 3
p("new filter:", filter)
case sdl.K_l: // l key toggles light
light = !light
if light {
p("light on")
gl.Enable(gl.LIGHTING)
} else {
p("light off")
gl.Disable(gl.LIGHTING)
}
case sdl.K_PAGEUP: // page up zooms into the scene
z -= 0.02
case sdl.K_PAGEDOWN: // zoom out of the scene
z += 0.02
case sdl.K_UP: // up arrow affects x rotation
xspeed -= 0.01
case sdl.K_DOWN: // down arrow affects x rotation
xspeed += 0.01
case sdl.K_RIGHT: // affect y rotation
yspeed += 0.01
case sdl.K_LEFT: // affect y rotation
yspeed -= 0.01
case sdl.K_ESCAPE:
Quit(0)
case sdl.K_F1:
sdl.WM_ToggleFullScreen(surface)
}
}
func main() {
var err os.Error
if err = glfw.Init(); err != nil {
fmt.Fprintf(os.Stderr, "%v\n", err)
return
}
defer glfw.Terminate()
// Open window with FSAA samples (if possible).
glfw.OpenWindowHint(glfw.FsaaSamples, 4)
if err = glfw.OpenWindow(400, 400, 0, 0, 0, 0, 0, 0, glfw.Windowed); err != nil {
fmt.Fprintf(os.Stderr, "%v\n", err)
return
}
defer glfw.CloseWindow()
glfw.SetWindowTitle("Aliasing Detector")
glfw.SetSwapInterval(1)
if samples := glfw.WindowParam(glfw.FsaaSamples); samples != 0 {
fmt.Fprintf(os.Stdout, "Context reports FSAA is supported with %d samples\n", samples)
} else {
fmt.Fprintf(os.Stdout, "Context reports FSAA is unsupported\n")
}
gl.MatrixMode(gl.PROJECTION)
glu.Perspective(0, 1, 0, 1)
for glfw.WindowParam(glfw.Opened) == 1 {
time := float32(glfw.Time())
gl.Clear(gl.COLOR_BUFFER_BIT)
gl.LoadIdentity()
gl.Translatef(0.5, 0, 0)
gl.Rotatef(time, 0, 0, 1)
gl.Enable(GL_MULTISAMPLE_ARB)
gl.Color3f(1, 1, 1)
gl.Rectf(-0.25, -0.25, 0.25, 0.25)
gl.LoadIdentity()
gl.Translatef(-0.5, 0, 0)
gl.Rotatef(time, 0, 0, 1)
gl.Disable(GL_MULTISAMPLE_ARB)
gl.Color3f(1, 1, 1)
gl.Rectf(-0.25, -0.25, 0.25, 0.25)
glfw.SwapBuffers()
}
}
func special(key, x, y int) {
switch key {
case glut.KEY_F1:
gl.BlendFunc(gl.SRC_ALPHA, gl.ONE_MINUS_SRC_ALPHA)
gl.Enable(gl.BLEND)
gl.Enable(gl.LINE_SMOOTH)
gl.Enable(gl.POINT_SMOOTH)
case glut.KEY_F2:
gl.Disable(gl.BLEND)
gl.Disable(gl.LINE_SMOOTH)
gl.Disable(gl.POINT_SMOOTH)
case glut.KEY_UP:
thrust = true
thrustTime = glut.Get(glut.ELAPSED_TIME)
case glut.KEY_LEFT:
left = true
leftTime = glut.Get(glut.ELAPSED_TIME)
case glut.KEY_RIGHT:
right = true
rightTime = glut.Get(glut.ELAPSED_TIME)
}
}
func resetZoom() {
// Reset viewport
gl.LoadIdentity()
gl.MatrixMode(gl.PROJECTION)
gl.LoadIdentity()
// Reset ortho view
gl.Ortho(left, right, bottom, top, 1, -1)
gl.Rotatef(180, 0, 0, 0)
gl.Translatef(float32(-*cx), float32(-*cy), 0)
gl.MatrixMode(gl.MODELVIEW)
gl.Disable(gl.DEPTH_TEST)
gl.LoadIdentity()
}
func reshape(w, h int) {
/* Because Gil specified "screen coordinates" (presumably with an
upper-left origin), this short bit of code sets up the coordinate
system to correspond to actual window coodrinates. This code
wouldn't be required if you chose a (more typical in 3D) abstract
coordinate system. */
gl.ClearColor(1, 1, 1, 1)
//fmt.Println(gl.GetString(gl.EXTENSIONS))
gl.Viewport(0, 0, w, h) /* Establish viewing area to cover entire window. */
gl.MatrixMode(gl.PROJECTION) /* Start modifying the projection matrix. */
gl.LoadIdentity() /* Reset project matrix. */
gl.Ortho(0, float64(w), 0, float64(h), -1, 1) /* Map abstract coords directly to window coords. */
gl.Scalef(1, -1, 1) /* Invert Y axis so increasing Y goes down. */
gl.Translatef(0, float32(-h), 0) /* Shift origin up to upper-left corner. */
gl.Enable(gl.BLEND)
gl.BlendFunc(gl.SRC_ALPHA, gl.ONE_MINUS_SRC_ALPHA)
gl.Disable(gl.DEPTH_TEST)
width, height = w, h
}
func (f *Font) teardownTextRendering(texture gl.GLuint, initial *sdl.Surface, intermediarya *sdl.Surface, intermediary *sdl.Surface) (endw int, endh int) {
//
gl.Disable(gl.BLEND)
/* Bad things happen if we delete the texture before it finishes */
gl.Finish()
/* return the deltas in the unused w,h part of the rect */
endw = int(initial.W)
endh = int(initial.H)
/* Clean up */
initial.Free()
intermediarya.Free()
intermediary.Free()
gl.DeleteTextures(1, &texture)
//
return
}
func drawWin(d float) {
gl.LoadIdentity()
// gl.LineWidth(5.0)
// gl.Enable(gl.POINT_SMOOTH)
// gl.Enable(gl.LINE_SMOOTH)
gl.Enable(gl.BLEND)
gl.BlendFunc(gl.SRC_ALPHA, gl.ONE_MINUS_SRC_ALPHA)
if d > 1.0 {
d = 1.0
}
c := WinColor
gl.Color4f(gl.GLfloat(c[0]), gl.GLfloat(c[1]), gl.GLfloat(c[2]), gl.GLfloat(d))
m := PlayArea * 4
t := 1.0 * m
b := -1.0 * m
r := 1.0 * m
l := -1.0 * m
gl.Begin(gl.POLYGON)
zo := -10.0
gl.Vertex3f(gl.GLfloat(l), gl.GLfloat(t), gl.GLfloat(zo))
gl.Vertex3f(gl.GLfloat(r), gl.GLfloat(t), gl.GLfloat(zo))
gl.Vertex3f(gl.GLfloat(r), gl.GLfloat(b), gl.GLfloat(zo))
gl.Vertex3f(gl.GLfloat(l), gl.GLfloat(b), gl.GLfloat(zo))
gl.Vertex3f(gl.GLfloat(l), gl.GLfloat(t), gl.GLfloat(zo))
gl.End()
gl.Disable(gl.BLEND)
}
func (f *Font) DrawText3D(pos Vector3, color [3]byte, scale float, txt string) (endw int, endh int) {
gl.LoadIdentity()
// gl.Translatef(gl.GLfloat(pos.X), gl.GLfloat(pos.Y), gl.GLfloat(-4.99));
gl.Translatef(gl.GLfloat(pos.X), gl.GLfloat(pos.Y), gl.GLfloat(-4.99))
gl.Scalef(gl.GLfloat(1.0/64.0*scale), gl.GLfloat(1.0/64.0*scale), gl.GLfloat(1.0))
gl.Disable(gl.DEPTH_TEST)
texture, initial, intermediarya, intermediary, w, h := f.setupTextRendering(color, txt)
wi := gl.GLfloat(w)
he := gl.GLfloat(h)
locX := gl.GLfloat(0) - wi*0.5
locY := gl.GLfloat(0) - he*0.5
/* Draw a quad at location */
gl.Begin(gl.QUADS)
/* Recall that the origin is in the lower-left corner
That is why the TexCoords specify different corners
than the Vertex coors seem to. */
gl.Color4f(1.0, 1.0, 0.0, 1.0)
gl.TexCoord2f(0.0, 1.0)
gl.Vertex3f(locX, locY, 0.0)
gl.TexCoord2f(1.0, 1.0)
gl.Vertex3f(locX+wi, locY, 0.0)
gl.TexCoord2f(1.0, 0.0)
gl.Vertex3f(locX+wi, locY+he, 0.0)
gl.TexCoord2f(0.0, 0.0)
gl.Vertex3f(locX, locY+he, 0.0)
gl.End()
endw, endh = f.teardownTextRendering(texture, initial, intermediarya, intermediary)
gl.Enable(gl.DEPTH_TEST)
return
}
func drawCircle(t *trigger) {
radius := float64(t.Size)
pos := t.Pos
gl.LoadIdentity()
gl.Color4f(gl.GLfloat(t.Col[0]), gl.GLfloat(t.Col[1]), gl.GLfloat(t.Col[2]), gl.GLfloat(t.Col[3]))
gl.LineWidth(2.0)
gl.Translatef(gl.GLfloat(pos.X), gl.GLfloat(pos.Y), gl.GLfloat(pos.Z))
gl.Enable(gl.BLEND)
gl.BlendFunc(gl.SRC_ALPHA, gl.ONE_MINUS_SRC_ALPHA)
gl.Begin(gl.POLYGON)
for i := 0; i < 360; i++ {
var degInRad float64 = float64(i) * DEG2RAD
gl.Vertex3f(gl.GLfloat(math.Cos(degInRad)*radius), gl.GLfloat(math.Sin(degInRad)*radius), gl.GLfloat(0.0))
}
gl.End()
gl.Disable(gl.BLEND)
}