// reset our viewport after a window resize
func resizeWindow(width, height int) {
// protect against a divide by zero
if height == 0 {
height = 1
}
// Setup our viewport
gl.Viewport(0, 0, width, height)
// change to the projection matrix and set our viewing volume.
gl.MatrixMode(gl.PROJECTION)
gl.LoadIdentity()
// aspect ratio
aspect := gl.GLdouble(width / height)
// Set our perspective.
// This code is equivalent to using gluPerspective as in the original tutorial.
var fov, near, far gl.GLdouble
fov = 45.0
near = 0.1
far = 100.0
top := gl.GLdouble(math.Tan(float64(fov*math.Pi/360.0))) * near
bottom := -top
left := aspect * bottom
right := aspect * top
gl.Frustum(float64(left), float64(right), float64(bottom), float64(top), float64(near), float64(far))
// Make sure we're changing the model view and not the projection
gl.MatrixMode(gl.MODELVIEW)
// Reset the view
gl.LoadIdentity()
}
func main() {
var err os.Error
if err = glfw.Init(); err != nil {
fmt.Fprintf(os.Stderr, "%v\n", err)
return
}
defer glfw.Terminate()
// Open window with FSAA samples (if possible).
glfw.OpenWindowHint(glfw.FsaaSamples, 4)
if err = glfw.OpenWindow(400, 400, 0, 0, 0, 0, 0, 0, glfw.Windowed); err != nil {
fmt.Fprintf(os.Stderr, "%v\n", err)
return
}
defer glfw.CloseWindow()
glfw.SetWindowTitle("Aliasing Detector")
glfw.SetSwapInterval(1)
if samples := glfw.WindowParam(glfw.FsaaSamples); samples != 0 {
fmt.Fprintf(os.Stdout, "Context reports FSAA is supported with %d samples\n", samples)
} else {
fmt.Fprintf(os.Stdout, "Context reports FSAA is unsupported\n")
}
gl.MatrixMode(gl.PROJECTION)
glu.Perspective(0, 1, 0, 1)
for glfw.WindowParam(glfw.Opened) == 1 {
time := float32(glfw.Time())
gl.Clear(gl.COLOR_BUFFER_BIT)
gl.LoadIdentity()
gl.Translatef(0.5, 0, 0)
gl.Rotatef(time, 0, 0, 1)
gl.Enable(GL_MULTISAMPLE_ARB)
gl.Color3f(1, 1, 1)
gl.Rectf(-0.25, -0.25, 0.25, 0.25)
gl.LoadIdentity()
gl.Translatef(-0.5, 0, 0)
gl.Rotatef(time, 0, 0, 1)
gl.Disable(GL_MULTISAMPLE_ARB)
gl.Color3f(1, 1, 1)
gl.Rectf(-0.25, -0.25, 0.25, 0.25)
glfw.SwapBuffers()
}
}
/* new window size or exposure */
func reshape(width int, height int) {
h := float64(height) / float64(width)
gl.Viewport(0, 0, width, height)
gl.MatrixMode(gl.PROJECTION)
gl.LoadIdentity()
gl.Frustum(-1.0, 1.0, -h, h, 5.0, 60.0)
gl.MatrixMode(gl.MODELVIEW)
gl.LoadIdentity()
gl.Translatef(0.0, 0.0, -40.0)
}
func reshape(w, h int) {
if h == 0 {
h = 1
}
gl.Viewport(0, 0, w, h)
gl.MatrixMode(gl.PROJECTION)
gl.LoadIdentity()
glu.Perspective(45.0, float64(w)/float64(h), 0.1, 100.0)
gl.MatrixMode(gl.MODELVIEW)
gl.LoadIdentity()
resetZoom()
}
func resetZoom() {
// Reset viewport
gl.LoadIdentity()
gl.MatrixMode(gl.PROJECTION)
gl.LoadIdentity()
// Reset ortho view
gl.Ortho(left, right, bottom, top, 1, -1)
gl.Rotatef(180, 0, 0, 0)
gl.Translatef(float32(-*cx), float32(-*cy), 0)
gl.MatrixMode(gl.MODELVIEW)
gl.Disable(gl.DEPTH_TEST)
gl.LoadIdentity()
}
func glEnable2D() {
var vPort [4]gl.GLint
gl.GetIntegerv(gl.VIEWPORT, &vPort[0])
gl.MatrixMode(gl.PROJECTION)
gl.PushMatrix()
gl.LoadIdentity()
gl.Ortho(0.0, gl.GLdouble(vPort[2]), 0.0, gl.GLdouble(vPort[3]), -1.0, 1.0)
gl.MatrixMode(gl.MODELVIEW)
gl.PushMatrix()
gl.LoadIdentity()
}
// Here goes our drawing code
func drawGLScene() {
// Clear the screen and depth buffer
gl.Clear(gl.COLOR_BUFFER_BIT | gl.DEPTH_BUFFER_BIT)
// Move left 1.5 units and into the screen 6.0 units.
gl.LoadIdentity()
gl.Translatef(-1.5, 0.0, -6.0)
gl.Rotatef(float32(rtri), 0.0, 1.0, 0.0) // Rotate the triangle on the Y axis
gl.Begin(gl.TRIANGLES) // Draw triangles
gl.Color3f(1.0, 0.0, 0.0) // Set The Color To Red
gl.Vertex3f(0.0, 1.0, 0.0) // top
gl.Color3f(0.0, 1.0, 0.0) // Set The Color To Red
gl.Vertex3f(-1.0, -1.0, 0.0) // bottom left
gl.Color3f(0.0, 0.0, 1.0) // Set The Color To Red
gl.Vertex3f(1.0, -1.0, 0.0) // bottom right
gl.End() // finish drawing the triangle
// Move right 3 units
gl.LoadIdentity()
gl.Translatef(1.5, 0.0, -6.0)
gl.Color3f(0.5, 0.5, 1.0) // Set The Color To Blue One Time Only
gl.Rotatef(float32(rquad), 1.0, 0.0, 0.0) // rotate the quad on the X axis
gl.Begin(gl.QUADS) // draw quads
gl.Vertex3f(-1.0, 1.0, 0.0) // top left
gl.Vertex3f(1.0, 1.0, 0.0) // top right
gl.Vertex3f(1.0, -1.0, 0.0) // bottom right
gl.Vertex3f(-1.0, -1.0, 0.0) // bottom left
gl.End() // done drawing the quad
// Draw to the screen
sdl.GL_SwapBuffers()
rtri += 0.2 // Increase The Rotation Variable For The Triangle
rquad -= 0.15 // Decrease The Rotation Variable For The Quad
// Gather our frames per second
frames++
t := sdl.GetTicks()
if t-t0 >= 5000 {
seconds := (t - t0) / 1000.0
fps := frames / seconds
fmt.Println(frames, "frames in", seconds, "seconds =", fps, "FPS")
t0 = t
frames = 0
}
}
func (f *Font) DrawText2D(x int, y int, color [3]byte, scale float, txt string) (endw int, endh int) {
gl.LoadIdentity()
// gl.Translatef(0.0, 0.0, -2.0);
glEnable2D()
gl.Disable(gl.DEPTH_TEST)
texture, initial, intermediarya, intermediary, w, h := f.setupTextRendering(color, txt)
locX := gl.GLfloat(x)
locY := gl.GLfloat(y)
wi := gl.GLfloat(w) * gl.GLfloat(scale)
he := gl.GLfloat(h) * gl.GLfloat(scale)
/* Draw a quad at location */
gl.Begin(gl.QUADS)
/* Recall that the origin is in the lower-left corner
That is why the TexCoords specify different corners
than the Vertex coors seem to. */
gl.TexCoord2f(0.0, 1.0)
gl.Vertex2f(locX, locY)
gl.TexCoord2f(1.0, 1.0)
gl.Vertex2f(locX+wi, locY)
gl.TexCoord2f(1.0, 0.0)
gl.Vertex2f(locX+wi, locY+he)
gl.TexCoord2f(0.0, 0.0)
gl.Vertex2f(locX, locY+he)
gl.End()
endw, endh = f.teardownTextRendering(texture, initial, intermediarya, intermediary)
gl.Enable(gl.DEPTH_TEST)
glDisable2D()
return
}
func drawFrame() {
gl.LoadIdentity()
gl.LineWidth(5.0)
gl.Enable(gl.POINT_SMOOTH)
gl.Enable(gl.LINE_SMOOTH)
gl.Color4f(gl.GLfloat(FrameColor[0]), gl.GLfloat(FrameColor[1]), gl.GLfloat(FrameColor[2]), 0.1)
m := PlayArea
t := 1.0 * m
b := -1.0 * m
r := 1.0 * m
l := -1.0 * m
gl.Begin(gl.LINE_STRIP)
zo := -5.0
gl.Vertex3f(gl.GLfloat(l), gl.GLfloat(t), gl.GLfloat(zo))
gl.Vertex3f(gl.GLfloat(r), gl.GLfloat(t), gl.GLfloat(zo))
gl.Vertex3f(gl.GLfloat(r), gl.GLfloat(b), gl.GLfloat(zo))
gl.Vertex3f(gl.GLfloat(l), gl.GLfloat(b), gl.GLfloat(zo))
gl.Vertex3f(gl.GLfloat(l), gl.GLfloat(t), gl.GLfloat(zo))
gl.End()
}
func display() {
gl.Clear(gl.COLOR_BUFFER_BIT)
bitmap_output(40, 35, "This is written in a GLUT bitmap font.", glut.BITMAP_TIMES_ROMAN_24)
bitmap_output(30, 210, "More bitmap text is a fixed 9 by 15 font.", glut.BITMAP_9_BY_15)
bitmap_output(70, 240, " Helvetica is yet another bitmap font.", glut.BITMAP_HELVETICA_18)
gl.MatrixMode(gl.PROJECTION)
gl.PushMatrix()
gl.LoadIdentity()
glu.Perspective(40.0, 1.0, 0.1, 20.0)
gl.MatrixMode(gl.MODELVIEW)
gl.PushMatrix()
// Banthar's glu doesn't have this right now.
// glu.LookAt(0.0, 0.0, 4.0, /* eye is at (0,0,30) */
// 0.0, 0.0, 0.0, /* center is at (0,0,0) */
// 0.0, 1.0, 0.) /* up is in postivie Y direction */
gl.PushMatrix()
gl.Translatef(0, 0, -4)
gl.Rotatef(50, 0, 1, 0)
stroke_output(-2.5, 1.1, " This is written in a", glut.STROKE_ROMAN)
stroke_output(-2.5, 0, " GLUT stroke font.", glut.STROKE_ROMAN)
stroke_output(-2.5, -1.1, "using 3D perspective.", glut.STROKE_ROMAN)
gl.PopMatrix()
gl.MatrixMode(gl.MODELVIEW)
gl.PopMatrix()
gl.MatrixMode(gl.PROJECTION)
gl.PopMatrix()
gl.MatrixMode(gl.MODELVIEW)
gl.Flush()
}
func reshape(w, h int) {
gl.Viewport(0, 0, w, h)
gl.MatrixMode(gl.PROJECTION)
gl.LoadIdentity()
gl.Ortho(0, float64(w), 0, float64(h), -1, 1)
gl.Scalef(1, -1, 1)
gl.Translatef(0, float32(-h), 0)
gl.MatrixMode(gl.MODELVIEW)
}
func main() {
sdl.Init(sdl.INIT_VIDEO)
var screen = sdl.SetVideoMode(640, 480, 32, sdl.OPENGL)
if screen == nil {
panic("sdl error")
}
if gl.Init() != 0 {
panic("glew error")
}
pen := Pen{}
gl.MatrixMode(gl.PROJECTION)
gl.Viewport(0, 0, gl.GLsizei(screen.W), gl.GLsizei(screen.H))
gl.LoadIdentity()
gl.Ortho(0, gl.GLdouble(screen.W), gl.GLdouble(screen.H), 0, -1.0, 1.0)
gl.ClearColor(1, 1, 1, 0)
gl.Clear(gl.COLOR_BUFFER_BIT)
var running = true
for running {
e := &sdl.Event{}
for e.Poll() {
switch e.Type {
case sdl.QUIT:
running = false
break
case sdl.KEYDOWN:
running = false
break
case sdl.MOUSEMOTION:
me := e.MouseMotion()
if me.State != 0 {
pen.lineTo(Point{int(me.X), int(me.Y)})
} else {
pen.moveTo(Point{int(me.X), int(me.Y)})
}
break
}
}
sdl.GL_SwapBuffers()
sdl.Delay(25)
}
sdl.Quit()
}
func reshape(w, h int) {
gl.Viewport(0, 0, gl.GLsizei(w), gl.GLsizei(h))
gl.MatrixMode(gl.PROJECTION)
gl.LoadIdentity()
gl.Ortho(0, gl.GLdouble(w), 0, gl.GLdouble(h), -1, 1)
gl.Scalef(1, -1, 1)
gl.Translatef(0, gl.GLfloat(-h), 0)
gl.MatrixMode(gl.MODELVIEW)
}
func (self *Camera) Setup() {
d := self.Distance
Angle := self.Angle
Angle360 := Angle.Scale(1 / math.Pi * 180)
TargetPos := self.Target.Pos
gl.MatrixMode(gl.PROJECTION)
gl.LoadIdentity()
gl.Viewport(0, 0, 800, 600)
gl.Frustum(-1, 1, -1, 1, 4, 1000)
gl.MatrixMode(gl.MODELVIEW)
gl.LoadIdentity()
gl.Translatef(0, 0, -d)
gl.Rotatef(Angle360.Y, 1, 0, 0)
gl.Rotatef(Angle360.X, 0, 1, 0)
gl.Translatef(-TargetPos.X, -TargetPos.Y, -TargetPos.Z)
}
func draw() {
xtrans := -xpos
ztrans := -zpos
ytrans := -walkbias - 0.25
scenroty := 360.0 - yrot
// Clear the screen and depth buffer
gl.Clear(gl.COLOR_BUFFER_BIT | gl.DEPTH_BUFFER_BIT)
// reset the view
gl.LoadIdentity()
// Rotate up and down to look up and down
gl.Rotatef(lookupdown, 1.0, 0.0, 0.0)
// Rotate depending on direction player is facing
gl.Rotatef(scenroty, 0.0, 1.0, 0.0)
// translate the scene based on player position
gl.Translatef(xtrans, ytrans-1.75, ztrans)
for _, chunk := range chunks {
for y := 0; y < 16; y++ {
for x := 0; x < 16; x++ {
for z := 0; z <= 16; z++ {
if len(chunk.Data[y][x]) > z && chunk.Data[y][x][z] != "" {
gl.PushMatrix()
gl.Translated(
float64(16*chunk.X+x),
float64(z),
float64(16*chunk.Y+y))
gl.CallList(cubes[chunk.Data[y][x][z]])
gl.PopMatrix()
}
}
}
}
}
gl.PopMatrix()
sdl.GL_SwapBuffers()
Frames++
{
t := sdl.GetTicks()
if t-T0 >= 5000 {
seconds := (t - T0) / 1000.0
fps := Frames / seconds
print(Frames, " frames in ", seconds, " seconds = ", fps, " FPS\n")
T0 = t
Frames = 0
}
}
}
func main() {
sdl.Init(sdl.INIT_VIDEO)
var screen = sdl.SetVideoMode(640, 480, 32, sdl.OPENGL)
if screen == nil {
panic("sdl error")
}
if gl.Init() != 0 {
panic("gl error")
}
pen := Pen{}
gl.MatrixMode(gl.PROJECTION)
gl.Viewport(0, 0, int(screen.W), int(screen.H))
gl.LoadIdentity()
gl.Ortho(0, float64(screen.W), float64(screen.H), 0, -1.0, 1.0)
gl.ClearColor(1, 1, 1, 0)
gl.Clear(gl.COLOR_BUFFER_BIT)
var running = true
for running {
for e := sdl.PollEvent(); e != nil; e = sdl.PollEvent() {
switch ev := e.(type) {
case *sdl.QuitEvent:
running = false
case *sdl.KeyboardEvent:
if ev.Keysym.Sym == sdl.K_ESCAPE {
running = false
}
case *sdl.MouseMotionEvent:
if ev.State != 0 {
pen.lineTo(Point{int(ev.X), int(ev.Y)})
} else {
pen.moveTo(Point{int(ev.X), int(ev.Y)})
}
}
}
sdl.GL_SwapBuffers()
sdl.Delay(25)
}
sdl.Quit()
}
func reshape(w, h int) {
/* Because Gil specified "screen coordinates" (presumably with an
upper-left origin), this short bit of code sets up the coordinate
system to correspond to actual window coodrinates. This code
wouldn't be required if you chose a (more typical in 3D) abstract
coordinate system. */
gl.Viewport(0, 0, w, h) /* Establish viewing area to cover entire window. */
gl.MatrixMode(gl.PROJECTION) /* Start modifying the projection matrix. */
gl.LoadIdentity() /* Reset project matrix. */
gl.Ortho(0, float64(w), 0, float64(h), -1, 1) /* Map abstract coords directly to window coords. */
gl.Scalef(1, -1, 1) /* Invert Y axis so increasing Y goes down. */
gl.Translatef(0, float32(-h), 0) /* Shift origin up to upper-left corner. */
}
func ResizeWindow(w int32, h int32) {
// resizeWindow
gl.MatrixMode(gl.PROJECTION)
gl.Viewport(0, 0, gl.GLsizei(w), gl.GLsizei(h))
gl.LoadIdentity()
// glu.Perspective( 45.0, ratio, 0.1, 100.0)
aspect := gl.GLdouble(w) / gl.GLdouble(h)
zNear := gl.GLdouble(0.1)
zFar := gl.GLdouble(100.0)
gl.Frustum(-NearHeight*aspect,
NearHeight*aspect,
-NearHeight,
NearHeight, zNear, zFar)
gl.MatrixMode(gl.MODELVIEW)
gl.LoadIdentity()
WinW = int(w)
WinH = int(h)
}
// Here goes our drawing code
func drawGLScene(sector Sector) {
xtrans := gl.GLfloat(-xpos)
ztrans := gl.GLfloat(-zpos)
ytrans := gl.GLfloat(-walkbias - 0.25)
scenroty := gl.GLfloat(360.0 - yrot)
// Clear the screen and depth buffer
gl.Clear(gl.COLOR_BUFFER_BIT | gl.DEPTH_BUFFER_BIT)
// reset the view
gl.LoadIdentity()
// Rotate up and down to look up and down
gl.Rotatef(float32(lookupdown), 1.0, 0.0, 0.0)
// Rotate depending on direction player is facing
gl.Rotatef(float32(scenroty), 0.0, 1.0, 0.0)
// translate the scene based on player position
gl.Translatef(float32(xtrans), float32(ytrans), float32(ztrans))
gl.BindTexture(gl.TEXTURE_2D, uint(textures[filter]))
for _, vertices := range sector {
gl.Begin(gl.TRIANGLES)
for _, triangle := range *vertices {
gl.Normal3f(0.0, 0.0, 1.0)
gl.TexCoord2f(float32(triangle.u), float32(triangle.v))
gl.Vertex3f(float32(triangle.x), float32(triangle.y), float32(triangle.z))
}
gl.End()
}
// Draw to the screen
sdl.GL_SwapBuffers()
// Gather our frames per second
frames++
t := sdl.GetTicks()
if t-t0 >= 5000 {
seconds := (t - t0) / 1000.0
fps := frames / seconds
fmt.Println(frames, "frames in", seconds, "seconds =", fps, "FPS")
t0 = t
frames = 0
}
}
func initWindow() {
glut.IgnoreKeyRepeat(1)
glut.DisplayFunc(display)
glut.VisibilityFunc(visible)
glut.KeyboardFunc(key)
glut.KeyboardUpFunc(keyup)
glut.SpecialFunc(special)
glut.SpecialUpFunc(specialup)
glut.JoystickFunc(joystick, 100)
gl.MatrixMode(gl.PROJECTION)
gl.LoadIdentity()
gl.Ortho(0, 40, 0, 40, 0, 40)
gl.MatrixMode(gl.MODELVIEW)
gl.PointSize(3.0)
currentWindow = glut.GetWindow()
}
func reshape(w, h int) {
/* Because Gil specified "screen coordinates" (presumably with an
upper-left origin), this short bit of code sets up the coordinate
system to correspond to actual window coodrinates. This code
wouldn't be required if you chose a (more typical in 3D) abstract
coordinate system. */
gl.ClearColor(1, 1, 1, 1)
//fmt.Println(gl.GetString(gl.EXTENSIONS))
gl.Viewport(0, 0, w, h) /* Establish viewing area to cover entire window. */
gl.MatrixMode(gl.PROJECTION) /* Start modifying the projection matrix. */
gl.LoadIdentity() /* Reset project matrix. */
gl.Ortho(0, float64(w), 0, float64(h), -1, 1) /* Map abstract coords directly to window coords. */
gl.Scalef(1, -1, 1) /* Invert Y axis so increasing Y goes down. */
gl.Translatef(0, float32(-h), 0) /* Shift origin up to upper-left corner. */
gl.Enable(gl.BLEND)
gl.BlendFunc(gl.SRC_ALPHA, gl.ONE_MINUS_SRC_ALPHA)
gl.Disable(gl.DEPTH_TEST)
width, height = w, h
}
func drawMass(m *phys.Mass, dsz gl.GLfloat) {
gl.LoadIdentity()
// gl.Translatef( -1.5, 0.0, -6.0 )
v := m.Pos
gl.Translatef(gl.GLfloat(v.X), gl.GLfloat(v.Y), gl.GLfloat(v.Z))
/* Rotate The Triangle On The Y axis ( NEW ) */
// gl.Rotatef( rtri, 0.0, 1.0, 0.0 );
gl.Begin(gl.TRIANGLES) /* Drawing Using Triangles */
gl.Color3f(dsz, 0.0, 0.0) /* Red */
gl.Vertex3f(0.0, dsz, 0.0) /* Top Of Triangle (Front) */
gl.Color3f(0.0, dsz, 0.0) /* Green */
gl.Vertex3f(-dsz, -dsz, dsz) /* Left Of Triangle (Front) */
gl.Color3f(0.0, 0.0, dsz) /* Blue */
gl.Vertex3f(dsz, -dsz, dsz) /* Right Of Triangle (Front) */
gl.Color3f(dsz, 0.0, 0.0) /* Red */
gl.Vertex3f(0.0, dsz, 0.0) /* Top Of Triangle (Right) */
gl.Color3f(0.0, 0.0, dsz) /* Blue */
gl.Vertex3f(dsz, -dsz, dsz) /* Left Of Triangle (Right) */
gl.Color3f(0.0, dsz, 0.0) /* Green */
gl.Vertex3f(dsz, -dsz, -dsz) /* Right Of Triangle (Right) */
gl.Color3f(dsz, 0.0, 0.0) /* Red */
gl.Vertex3f(0.0, dsz, 0.0) /* Top Of Triangle (Back) */
gl.Color3f(0.0, dsz, 0.0) /* Green */
gl.Vertex3f(dsz, -dsz, -dsz) /* Left Of Triangle (Back) */
gl.Color3f(0.0, 0.0, dsz) /* Blue */
gl.Vertex3f(-dsz, -dsz, -dsz) /* Right Of Triangle (Back) */
gl.Color3f(dsz, 0.0, 0.0) /* Red */
gl.Vertex3f(0.0, dsz, 0.0) /* Top Of Triangle (Left) */
gl.Color3f(0.0, 0.0, dsz) /* Blue */
gl.Vertex3f(-dsz, -dsz, -dsz) /* Left Of Triangle (Left) */
gl.Color3f(0.0, dsz, 0.0) /* Green */
gl.Vertex3f(-dsz, -dsz, dsz) /* Right Of Triangle (Left) */
gl.End() /* Finished Drawing The Triangle */
}
func drawCube(v *Vector3) {
gl.LoadIdentity()
// gl.Translatef( -1.5, 0.0, -6.0 )
gl.Translatef(gl.GLfloat(v.X), gl.GLfloat(v.Y), gl.GLfloat(v.Z))
/* Rotate The Triangle On The Y axis ( NEW ) */
// gl.Rotatef( rtri, 0.0, 1.0, 0.0 );
gl.Begin(gl.TRIANGLES) /* Drawing Using Triangles */
gl.Color3f(1.0, 0.0, 0.0) /* Red */
gl.Vertex3f(0.0, 1.0, 0.0) /* Top Of Triangle (Front) */
gl.Color3f(0.0, 1.0, 0.0) /* Green */
gl.Vertex3f(-1.0, -1.0, 1.0) /* Left Of Triangle (Front) */
gl.Color3f(0.0, 0.0, 1.0) /* Blue */
gl.Vertex3f(1.0, -1.0, 1.0) /* Right Of Triangle (Front) */
gl.Color3f(1.0, 0.0, 0.0) /* Red */
gl.Vertex3f(0.0, 1.0, 0.0) /* Top Of Triangle (Right) */
gl.Color3f(0.0, 0.0, 1.0) /* Blue */
gl.Vertex3f(1.0, -1.0, 1.0) /* Left Of Triangle (Right) */
gl.Color3f(0.0, 1.0, 0.0) /* Green */
gl.Vertex3f(1.0, -1.0, -1.0) /* Right Of Triangle (Right) */
gl.Color3f(1.0, 0.0, 0.0) /* Red */
gl.Vertex3f(0.0, 1.0, 0.0) /* Top Of Triangle (Back) */
gl.Color3f(0.0, 1.0, 0.0) /* Green */
gl.Vertex3f(1.0, -1.0, -1.0) /* Left Of Triangle (Back) */
gl.Color3f(0.0, 0.0, 1.0) /* Blue */
gl.Vertex3f(-1.0, -1.0, -1.0) /* Right Of Triangle (Back) */
gl.Color3f(1.0, 0.0, 0.0) /* Red */
gl.Vertex3f(0.0, 1.0, 0.0) /* Top Of Triangle (Left) */
gl.Color3f(0.0, 0.0, 1.0) /* Blue */
gl.Vertex3f(-1.0, -1.0, -1.0) /* Left Of Triangle (Left) */
gl.Color3f(0.0, 1.0, 0.0) /* Green */
gl.Vertex3f(-1.0, -1.0, 1.0) /* Right Of Triangle (Left) */
gl.End() /* Finished Drawing The Triangle */
rtri = rtri + 0.2
}
// Here goes our drawing code
func drawGLScene() {
// Clear the screen and depth buffer
gl.Clear(gl.COLOR_BUFFER_BIT | gl.DEPTH_BUFFER_BIT)
// reset the view
gl.LoadIdentity()
// Draw to the screen
sdl.GL_SwapBuffers()
// Gather our frames per second
frames++
t := sdl.GetTicks()
if t-t0 >= 5000 {
seconds := (t - t0) / 1000.0
fps := frames / seconds
fmt.Println(frames, "frames in", seconds, "seconds =", fps, "FPS")
t0 = t
frames = 0
}
}
func drawWin(d float) {
gl.LoadIdentity()
// gl.LineWidth(5.0)
// gl.Enable(gl.POINT_SMOOTH)
// gl.Enable(gl.LINE_SMOOTH)
gl.Enable(gl.BLEND)
gl.BlendFunc(gl.SRC_ALPHA, gl.ONE_MINUS_SRC_ALPHA)
if d > 1.0 {
d = 1.0
}
c := WinColor
gl.Color4f(gl.GLfloat(c[0]), gl.GLfloat(c[1]), gl.GLfloat(c[2]), gl.GLfloat(d))
m := PlayArea * 4
t := 1.0 * m
b := -1.0 * m
r := 1.0 * m
l := -1.0 * m
gl.Begin(gl.POLYGON)
zo := -10.0
gl.Vertex3f(gl.GLfloat(l), gl.GLfloat(t), gl.GLfloat(zo))
gl.Vertex3f(gl.GLfloat(r), gl.GLfloat(t), gl.GLfloat(zo))
gl.Vertex3f(gl.GLfloat(r), gl.GLfloat(b), gl.GLfloat(zo))
gl.Vertex3f(gl.GLfloat(l), gl.GLfloat(b), gl.GLfloat(zo))
gl.Vertex3f(gl.GLfloat(l), gl.GLfloat(t), gl.GLfloat(zo))
gl.End()
gl.Disable(gl.BLEND)
}
func (f *Font) DrawText3D(pos Vector3, color [3]byte, scale float, txt string) (endw int, endh int) {
gl.LoadIdentity()
// gl.Translatef(gl.GLfloat(pos.X), gl.GLfloat(pos.Y), gl.GLfloat(-4.99));
gl.Translatef(gl.GLfloat(pos.X), gl.GLfloat(pos.Y), gl.GLfloat(-4.99))
gl.Scalef(gl.GLfloat(1.0/64.0*scale), gl.GLfloat(1.0/64.0*scale), gl.GLfloat(1.0))
gl.Disable(gl.DEPTH_TEST)
texture, initial, intermediarya, intermediary, w, h := f.setupTextRendering(color, txt)
wi := gl.GLfloat(w)
he := gl.GLfloat(h)
locX := gl.GLfloat(0) - wi*0.5
locY := gl.GLfloat(0) - he*0.5
/* Draw a quad at location */
gl.Begin(gl.QUADS)
/* Recall that the origin is in the lower-left corner
That is why the TexCoords specify different corners
than the Vertex coors seem to. */
gl.Color4f(1.0, 1.0, 0.0, 1.0)
gl.TexCoord2f(0.0, 1.0)
gl.Vertex3f(locX, locY, 0.0)
gl.TexCoord2f(1.0, 1.0)
gl.Vertex3f(locX+wi, locY, 0.0)
gl.TexCoord2f(1.0, 0.0)
gl.Vertex3f(locX+wi, locY+he, 0.0)
gl.TexCoord2f(0.0, 0.0)
gl.Vertex3f(locX, locY+he, 0.0)
gl.End()
endw, endh = f.teardownTextRendering(texture, initial, intermediarya, intermediary)
gl.Enable(gl.DEPTH_TEST)
return
}
// Here goes our drawing code
func drawGLScene() {
// Clear the screen and depth buffer
gl.Clear(gl.COLOR_BUFFER_BIT | gl.DEPTH_BUFFER_BIT)
// Move left 1.5 units and into the screen 6.0 units.
gl.LoadIdentity()
gl.Translatef(-1.5, 0.0, -6.0)
gl.Begin(gl.TRIANGLES) // Draw triangles
gl.Vertex3f(0.0, 1.0, 0.0) // top
gl.Vertex3f(-1.0, -1.0, 0.0) // bottom left
gl.Vertex3f(1.0, -1.0, 0.0) // bottom right
gl.End() // finish drawing the triangle
// Move right 3 units
gl.Translatef(3.0, 0.0, 0.0)
gl.Begin(gl.QUADS) // draw quads
gl.Vertex3f(-1.0, 1.0, 0.0) // top left
gl.Vertex3f(1.0, 1.0, 0.0) // top right
gl.Vertex3f(1.0, -1.0, 0.0) // bottom right
gl.Vertex3f(-1.0, -1.0, 0.0) // bottom left
gl.End() // done drawing the quad
// Draw to the screen
sdl.GL_SwapBuffers()
// Gather our frames per second
frames++
t := sdl.GetTicks()
if t-t0 >= 5000 {
seconds := (t - t0) / 1000.0
fps := frames / seconds
fmt.Println(frames, "frames in", seconds, "seconds =", fps, "FPS")
t0 = t
frames = 0
}
}
func drawCircle(t *trigger) {
radius := float64(t.Size)
pos := t.Pos
gl.LoadIdentity()
gl.Color4f(gl.GLfloat(t.Col[0]), gl.GLfloat(t.Col[1]), gl.GLfloat(t.Col[2]), gl.GLfloat(t.Col[3]))
gl.LineWidth(2.0)
gl.Translatef(gl.GLfloat(pos.X), gl.GLfloat(pos.Y), gl.GLfloat(pos.Z))
gl.Enable(gl.BLEND)
gl.BlendFunc(gl.SRC_ALPHA, gl.ONE_MINUS_SRC_ALPHA)
gl.Begin(gl.POLYGON)
for i := 0; i < 360; i++ {
var degInRad float64 = float64(i) * DEG2RAD
gl.Vertex3f(gl.GLfloat(math.Cos(degInRad)*radius), gl.GLfloat(math.Sin(degInRad)*radius), gl.GLfloat(0.0))
}
gl.End()
gl.Disable(gl.BLEND)
}
func main() {
runtime.LockOSThread()
flag.Parse()
buildPalette()
sdl.Init(sdl.INIT_VIDEO)
defer sdl.Quit()
sdl.GL_SetAttribute(sdl.GL_SWAP_CONTROL, 1)
if sdl.SetVideoMode(512, 512, 32, sdl.OPENGL) == nil {
panic("sdl error")
}
if gl.Init() != 0 {
panic("gl error")
}
sdl.WM_SetCaption("Gomandel", "Gomandel")
gl.Enable(gl.TEXTURE_2D)
gl.Viewport(0, 0, 512, 512)
gl.MatrixMode(gl.PROJECTION)
gl.LoadIdentity()
gl.Ortho(0, 512, 512, 0, -1, 1)
gl.ClearColor(0, 0, 0, 0)
//-----------------------------------------------------------------------------
var dndDragging bool = false
var dndStart Point
var dndEnd Point
var tex gl.Texture
var tc TexCoords
var lastProgress int
initialRect := Rect{-1.5, -1.5, 3, 3}
rect := initialRect
rc := new(MandelbrotRequest)
rc.MakeRequest(512, 512, rect)
rc.WaitFor(Small, &tex, &tc)
running := true
e := new(sdl.Event)
for running {
for e.Poll() {
switch e.Type {
case sdl.QUIT:
running = false
case sdl.MOUSEBUTTONDOWN:
dndDragging = true
sdl.GetMouseState(&dndStart.X, &dndStart.Y)
dndEnd = dndStart
case sdl.MOUSEBUTTONUP:
dndDragging = false
sdl.GetMouseState(&dndEnd.X, &dndEnd.Y)
if e.MouseButton().Button == 3 {
rect = initialRect
} else {
rect = rectFromSelection(dndStart, dndEnd, 512, 512, rect)
tc = texCoordsFromSelection(dndStart, dndEnd, 512, 512, tc)
}
// make request
rc.MakeRequest(512, 512, rect)
case sdl.MOUSEMOTION:
if dndDragging {
sdl.GetMouseState(&dndEnd.X, &dndEnd.Y)
}
}
}
// if we're waiting for a result, check if it's ready
p := rc.Update(&tex, &tc)
if p != -1 {
lastProgress = p
}
gl.Clear(gl.COLOR_BUFFER_BIT)
tex.Bind(gl.TEXTURE_2D)
drawQuad(0, 0, 512, 512, tc.TX, tc.TY, tc.TX2, tc.TY2)
gl.BindTexture(gl.TEXTURE_2D, 0)
if dndDragging {
drawSelection(dndStart, dndEnd)
}
drawProgress(512, 512, lastProgress, rc.Pending)
sdl.GL_SwapBuffers()
}
}
// Here goes our drawing code
func drawGLScene() {
// Clear the screen and depth buffer
gl.Clear(gl.COLOR_BUFFER_BIT | gl.DEPTH_BUFFER_BIT)
// Move left 1.5 units and into the screen 6.0 units.
gl.LoadIdentity()
gl.Translatef(0.0, 0.0, -7.0)
gl.Rotatef(float32(xrot), 1.0, 0.0, 0.0) /* Rotate On The X Axis */
gl.Rotatef(float32(yrot), 0.0, 1.0, 0.0) /* Rotate On The Y Axis */
gl.Rotatef(float32(zrot), 0.0, 0.0, 1.0) /* Rotate On The Z Axis */
/* Select Our Texture */
gl.BindTexture(gl.TEXTURE_2D, uint(texture))
gl.Begin(gl.QUADS) // Draw a quad
/* Front Face */
gl.TexCoord2f(0.0, 1.0)
gl.Vertex3f(-1.0, -1.0, 1.0) // Bottom left
gl.TexCoord2f(1.0, 1.0)
gl.Vertex3f(1.0, -1.0, 1.0) // Bottom right
gl.TexCoord2f(1.0, 0.0)
gl.Vertex3f(1.0, 1.0, 1.0) // Top right
gl.TexCoord2f(0.0, 0.0)
gl.Vertex3f(-1.0, 1.0, 1.0) // Top left
/* Back Face */
gl.TexCoord2f(0.0, 0.0)
gl.Vertex3f(-1.0, -1.0, -1.0) // Bottom right
gl.TexCoord2f(0.0, 1.0)
gl.Vertex3f(-1.0, 1.0, -1.0) // Top right
gl.TexCoord2f(1.0, 1.0)
gl.Vertex3f(1.0, 1.0, -1.0) // Top left
gl.TexCoord2f(1.0, 0.0)
gl.Vertex3f(1.0, -1.0, -1.0) // Bottom left
/* Top Face */
gl.TexCoord2f(1.0, 1.0)
gl.Vertex3f(-1.0, 1.0, -1.0) // Top left
gl.TexCoord2f(1.0, 0.0)
gl.Vertex3f(-1.0, 1.0, 1.0) // Bottom left
gl.TexCoord2f(0.0, 0.0)
gl.Vertex3f(1.0, 1.0, 1.0) // Bottom right
gl.TexCoord2f(0.0, 1.0)
gl.Vertex3f(1.0, 1.0, -1.0) // Top right
/* Bottom Face */
gl.TexCoord2f(0.0, 1.0)
gl.Vertex3f(-1.0, -1.0, -1.0) // Top right
gl.TexCoord2f(1.0, 1.0)
gl.Vertex3f(1.0, -1.0, -1.0) // Top left
gl.TexCoord2f(1.0, 0.0)
gl.Vertex3f(1.0, -1.0, 1.0) // Bottom left
gl.TexCoord2f(0.0, 0.0)
gl.Vertex3f(-1.0, -1.0, 1.0) // Bottom right
/* Right face */
gl.TexCoord2f(0.0, 0.0)
gl.Vertex3f(1.0, -1.0, -1.0) // Bottom right
gl.TexCoord2f(0.0, 1.0)
gl.Vertex3f(1.0, 1.0, -1.0) // Top right
gl.TexCoord2f(1.0, 1.0)
gl.Vertex3f(1.0, 1.0, 1.0) // Top left
gl.TexCoord2f(1.0, 0.0)
gl.Vertex3f(1.0, -1.0, 1.0) // Bottom left
/* Left Face */
gl.TexCoord2f(1.0, 0.0)
gl.Vertex3f(-1.0, -1.0, -1.0) // Bottom left
gl.TexCoord2f(0.0, 0.0)
gl.Vertex3f(-1.0, -1.0, 1.0) // Bottom right
gl.TexCoord2f(0.0, 1.0)
gl.Vertex3f(-1.0, 1.0, 1.0) // Top right
gl.TexCoord2f(1.0, 1.0)
gl.Vertex3f(-1.0, 1.0, -1.0) // Top left
gl.End() // done drawing the quad
// Draw to the screen
sdl.GL_SwapBuffers()
xrot += 0.3 /* X Axis Rotation */
yrot += 0.2 /* Y Axis Rotation */
zrot += 0.4 /* Z Axis Rotation */
// Gather our frames per second
frames++
t := sdl.GetTicks()
if t-t0 >= 5000 {
seconds := (t - t0) / 1000.0
fps := frames / seconds
fmt.Println(frames, "frames in", seconds, "seconds =", fps, "FPS")
t0 = t
frames = 0
}
}