// RunBuildController starts the build sync loop for builds and buildConfig processing.
func (c *MasterConfig) RunBuildController(informers shared.InformerFactory) error {
// initialize build controller
dockerImage := c.ImageFor("docker-builder")
stiImage := c.ImageFor("sti-builder")
storageVersion := c.Options.EtcdStorageConfig.OpenShiftStorageVersion
groupVersion := unversioned.GroupVersion{Group: "", Version: storageVersion}
codec := kapi.Codecs.LegacyCodec(groupVersion)
admissionControl := admission.InitPlugin("SecurityContextConstraint", clientadapter.FromUnversionedClient(c.PrivilegedLoopbackKubernetesClient), "")
if wantsInformers, ok := admissionControl.(cmdadmission.WantsInformers); ok {
wantsInformers.SetInformers(informers)
}
buildDefaults, err := builddefaults.NewBuildDefaults(c.Options.AdmissionConfig.PluginConfig)
if err != nil {
return err
}
buildOverrides, err := buildoverrides.NewBuildOverrides(c.Options.AdmissionConfig.PluginConfig)
if err != nil {
return err
}
osclient, kclient := c.BuildControllerClients()
factory := buildcontrollerfactory.BuildControllerFactory{
KubeClient: kclient,
OSClient: osclient,
BuildUpdater: buildclient.NewOSClientBuildClient(osclient),
BuildLister: buildclient.NewOSClientBuildClient(osclient),
DockerBuildStrategy: &buildstrategy.DockerBuildStrategy{
Image: dockerImage,
// TODO: this will be set to --storage-version (the internal schema we use)
Codec: codec,
},
SourceBuildStrategy: &buildstrategy.SourceBuildStrategy{
Image: stiImage,
// TODO: this will be set to --storage-version (the internal schema we use)
Codec: codec,
AdmissionControl: admissionControl,
},
CustomBuildStrategy: &buildstrategy.CustomBuildStrategy{
// TODO: this will be set to --storage-version (the internal schema we use)
Codec: codec,
},
BuildDefaults: buildDefaults,
BuildOverrides: buildOverrides,
}
controller := factory.Create()
controller.Run()
deleteController := factory.CreateDeleteController()
deleteController.Run()
return nil
}
func BuildKubernetesMasterConfig(options configapi.MasterConfig, requestContextMapper kapi.RequestContextMapper, kubeClient *kclient.Client) (*MasterConfig, error) {
if options.KubernetesMasterConfig == nil {
return nil, errors.New("insufficient information to build KubernetesMasterConfig")
}
// Connect and setup etcd interfaces
etcdClient, err := etcd.EtcdClient(options.EtcdClientInfo)
if err != nil {
return nil, err
}
kubeletClientConfig := configapi.GetKubeletClientConfig(options)
kubeletClient, err := kclient.NewKubeletClient(kubeletClientConfig)
if err != nil {
return nil, fmt.Errorf("unable to configure Kubelet client: %v", err)
}
// in-order list of plug-ins that should intercept admission decisions
// TODO: Push node environment support to upstream in future
_, portString, err := net.SplitHostPort(options.ServingInfo.BindAddress)
if err != nil {
return nil, err
}
port, err := strconv.Atoi(portString)
if err != nil {
return nil, err
}
portRange, err := util.ParsePortRange(options.KubernetesMasterConfig.ServicesNodePortRange)
if err != nil {
return nil, err
}
podEvictionTimeout, err := time.ParseDuration(options.KubernetesMasterConfig.PodEvictionTimeout)
if err != nil {
return nil, fmt.Errorf("unable to parse PodEvictionTimeout: %v", err)
}
server := app.NewAPIServer()
server.EventTTL = 2 * time.Hour
server.ServiceClusterIPRange = net.IPNet(flagtypes.DefaultIPNet(options.KubernetesMasterConfig.ServicesSubnet))
server.ServiceNodePortRange = *portRange
server.AdmissionControl = strings.Join(AdmissionPlugins, ",")
// resolve extended arguments
// TODO: this should be done in config validation (along with the above) so we can provide
// proper errors
if err := cmdflags.Resolve(options.KubernetesMasterConfig.APIServerArguments, server.AddFlags); len(err) > 0 {
return nil, kerrors.NewAggregate(err)
}
cmserver := cmapp.NewCMServer()
cmserver.PodEvictionTimeout = podEvictionTimeout
// resolve extended arguments
// TODO: this should be done in config validation (along with the above) so we can provide
// proper errors
if err := cmdflags.Resolve(options.KubernetesMasterConfig.ControllerArguments, cmserver.AddFlags); len(err) > 0 {
return nil, kerrors.NewAggregate(err)
}
cloud, err := cloudprovider.InitCloudProvider(cmserver.CloudProvider, cmserver.CloudConfigFile)
if err != nil {
return nil, err
}
if cloud != nil {
glog.V(2).Infof("Successfully initialized cloud provider: %q from the config file: %q\n", server.CloudProvider, server.CloudConfigFile)
}
plugins := []admission.Interface{}
for _, pluginName := range strings.Split(server.AdmissionControl, ",") {
switch pluginName {
case saadmit.PluginName:
// we need to set some custom parameters on the service account admission controller, so create that one by hand
saAdmitter := saadmit.NewServiceAccount(kubeClient)
saAdmitter.LimitSecretReferences = options.ServiceAccountConfig.LimitSecretReferences
saAdmitter.Run()
plugins = append(plugins, saAdmitter)
default:
plugin := admission.InitPlugin(pluginName, kubeClient, server.AdmissionControlConfigFile)
if plugin != nil {
plugins = append(plugins, plugin)
}
}
}
admissionController := admission.NewChainHandler(plugins...)
var proxyClientCerts []tls.Certificate
if len(options.KubernetesMasterConfig.ProxyClientInfo.CertFile) > 0 {
clientCert, err := tls.LoadX509KeyPair(
options.KubernetesMasterConfig.ProxyClientInfo.CertFile,
options.KubernetesMasterConfig.ProxyClientInfo.KeyFile,
)
if err != nil {
return nil, err
}
proxyClientCerts = append(proxyClientCerts, clientCert)
}
// TODO you have to know every APIGroup you're enabling or upstream will panic. It's alternative to panicing is Fataling
// It needs a refactor to return errors
storageDestinations := master.NewStorageDestinations()
// storageVersions is a map from API group to allowed versions that must be a version exposed by the REST API or it breaks.
// We need to fix the upstream to stop using the storage version as a preferred api version.
storageVersions := map[string]string{}
enabledKubeVersions := configapi.GetEnabledAPIVersionsForGroup(*options.KubernetesMasterConfig, configapi.APIGroupKube)
enabledKubeVersionSet := sets.NewString(enabledKubeVersions...)
if len(enabledKubeVersions) > 0 {
databaseStorage, err := master.NewEtcdStorage(etcdClient, kapilatest.InterfacesForLegacyGroup, options.EtcdStorageConfig.KubernetesStorageVersion, options.EtcdStorageConfig.KubernetesStoragePrefix)
if err != nil {
return nil, fmt.Errorf("Error setting up Kubernetes server storage: %v", err)
}
storageDestinations.AddAPIGroup(configapi.APIGroupKube, databaseStorage)
storageVersions[configapi.APIGroupKube] = options.EtcdStorageConfig.KubernetesStorageVersion
}
enabledExtensionsVersions := configapi.GetEnabledAPIVersionsForGroup(*options.KubernetesMasterConfig, configapi.APIGroupExtensions)
if len(enabledExtensionsVersions) > 0 {
groupMeta, err := kapilatest.Group(configapi.APIGroupExtensions)
if err != nil {
return nil, fmt.Errorf("Error setting up Kubernetes extensions server storage: %v", err)
}
// TODO expose storage version options for api groups
databaseStorage, err := master.NewEtcdStorage(etcdClient, groupMeta.InterfacesFor, groupMeta.GroupVersion, options.EtcdStorageConfig.KubernetesStoragePrefix)
if err != nil {
return nil, fmt.Errorf("Error setting up Kubernetes extensions server storage: %v", err)
}
storageDestinations.AddAPIGroup(configapi.APIGroupExtensions, databaseStorage)
storageVersions[configapi.APIGroupExtensions] = enabledExtensionsVersions[0]
}
m := &master.Config{
PublicAddress: net.ParseIP(options.KubernetesMasterConfig.MasterIP),
ReadWritePort: port,
StorageDestinations: storageDestinations,
StorageVersions: storageVersions,
EventTTL: server.EventTTL,
//MinRequestTimeout: server.MinRequestTimeout,
ServiceClusterIPRange: (*net.IPNet)(&server.ServiceClusterIPRange),
ServiceNodePortRange: server.ServiceNodePortRange,
RequestContextMapper: requestContextMapper,
KubeletClient: kubeletClient,
APIPrefix: KubeAPIPrefix,
APIGroupPrefix: KubeAPIGroupPrefix,
EnableCoreControllers: true,
MasterCount: options.KubernetesMasterConfig.MasterCount,
Authorizer: apiserver.NewAlwaysAllowAuthorizer(),
AdmissionControl: admissionController,
EnableExp: len(enabledExtensionsVersions) > 0,
DisableV1: !enabledKubeVersionSet.Has("v1"),
// Set the TLS options for proxying to pods and services
// Proxying to nodes uses the kubeletClient TLS config (so can provide a different cert, and verify the node hostname)
ProxyTLSClientConfig: &tls.Config{
// Proxying to pods and services cannot verify hostnames, since they are contacted on randomly allocated IPs
InsecureSkipVerify: true,
Certificates: proxyClientCerts,
},
}
// set for consistency -- Origin only used m.EnableExp
cmserver.EnableExperimental = m.EnableExp
if options.DNSConfig != nil {
_, dnsPortStr, err := net.SplitHostPort(options.DNSConfig.BindAddress)
if err != nil {
return nil, fmt.Errorf("unable to parse DNS bind address %s: %v", options.DNSConfig.BindAddress, err)
}
dnsPort, err := strconv.Atoi(dnsPortStr)
if err != nil {
return nil, fmt.Errorf("invalid DNS port: %v", err)
}
m.ExtraServicePorts = append(m.ExtraServicePorts,
kapi.ServicePort{Name: "dns", Port: dnsPort, Protocol: kapi.ProtocolUDP, TargetPort: util.NewIntOrStringFromInt(dnsPort)},
kapi.ServicePort{Name: "dns-tcp", Port: dnsPort, Protocol: kapi.ProtocolTCP, TargetPort: util.NewIntOrStringFromInt(dnsPort)},
)
m.ExtraEndpointPorts = append(m.ExtraEndpointPorts,
kapi.EndpointPort{Name: "dns", Port: dnsPort, Protocol: kapi.ProtocolUDP},
kapi.EndpointPort{Name: "dns-tcp", Port: dnsPort, Protocol: kapi.ProtocolTCP},
)
}
kmaster := &MasterConfig{
Options: *options.KubernetesMasterConfig,
KubeClient: kubeClient,
Master: m,
ControllerManager: cmserver,
CloudProvider: cloud,
}
return kmaster, nil
}
func BuildKubernetesMasterConfig(options configapi.MasterConfig, requestContextMapper kapi.RequestContextMapper, kubeClient *kclient.Client) (*MasterConfig, error) {
if options.KubernetesMasterConfig == nil {
return nil, errors.New("insufficient information to build KubernetesMasterConfig")
}
// Connect and setup etcd interfaces
etcdClient, err := etcd.EtcdClient(options.EtcdClientInfo)
if err != nil {
return nil, err
}
databaseStorage, err := master.NewEtcdStorage(etcdClient, kapilatest.InterfacesFor, options.EtcdStorageConfig.KubernetesStorageVersion, options.EtcdStorageConfig.KubernetesStoragePrefix)
if err != nil {
return nil, fmt.Errorf("Error setting up Kubernetes server storage: %v", err)
}
kubeletClientConfig := configapi.GetKubeletClientConfig(options)
kubeletClient, err := kclient.NewKubeletClient(kubeletClientConfig)
if err != nil {
return nil, fmt.Errorf("unable to configure Kubelet client: %v", err)
}
// in-order list of plug-ins that should intercept admission decisions
// TODO: Push node environment support to upstream in future
_, portString, err := net.SplitHostPort(options.ServingInfo.BindAddress)
if err != nil {
return nil, err
}
port, err := strconv.Atoi(portString)
if err != nil {
return nil, err
}
portRange, err := util.ParsePortRange(options.KubernetesMasterConfig.ServicesNodePortRange)
if err != nil {
return nil, err
}
podEvictionTimeout, err := time.ParseDuration(options.KubernetesMasterConfig.PodEvictionTimeout)
if err != nil {
return nil, fmt.Errorf("unable to parse PodEvictionTimeout: %v", err)
}
server := app.NewAPIServer()
server.EventTTL = 2 * time.Hour
server.ServiceClusterIPRange = net.IPNet(flagtypes.DefaultIPNet(options.KubernetesMasterConfig.ServicesSubnet))
server.ServiceNodePortRange = *portRange
server.AdmissionControl = strings.Join(AdmissionPlugins, ",")
// resolve extended arguments
// TODO: this should be done in config validation (along with the above) so we can provide
// proper errors
if err := cmdflags.Resolve(options.KubernetesMasterConfig.APIServerArguments, server.AddFlags); len(err) > 0 {
return nil, kerrors.NewAggregate(err)
}
cmserver := cmapp.NewCMServer()
cmserver.PodEvictionTimeout = podEvictionTimeout
// resolve extended arguments
// TODO: this should be done in config validation (along with the above) so we can provide
// proper errors
if err := cmdflags.Resolve(options.KubernetesMasterConfig.ControllerArguments, cmserver.AddFlags); len(err) > 0 {
return nil, kerrors.NewAggregate(err)
}
cloud, err := cloudprovider.InitCloudProvider(cmserver.CloudProvider, cmserver.CloudConfigFile)
if err != nil {
return nil, err
}
plugins := []admission.Interface{}
for _, pluginName := range strings.Split(server.AdmissionControl, ",") {
switch pluginName {
case saadmit.PluginName:
// we need to set some custom parameters on the service account admission controller, so create that one by hand
saAdmitter := saadmit.NewServiceAccount(kubeClient)
saAdmitter.LimitSecretReferences = options.ServiceAccountConfig.LimitSecretReferences
saAdmitter.Run()
plugins = append(plugins, saAdmitter)
default:
plugin := admission.InitPlugin(pluginName, kubeClient, server.AdmissionControlConfigFile)
if plugin != nil {
plugins = append(plugins, plugin)
}
}
}
admissionController := admission.NewChainHandler(plugins...)
var proxyClientCerts []tls.Certificate
if len(options.KubernetesMasterConfig.ProxyClientInfo.CertFile) > 0 {
clientCert, err := tls.LoadX509KeyPair(
options.KubernetesMasterConfig.ProxyClientInfo.CertFile,
options.KubernetesMasterConfig.ProxyClientInfo.KeyFile,
)
if err != nil {
return nil, err
}
proxyClientCerts = append(proxyClientCerts, clientCert)
}
m := &master.Config{
PublicAddress: net.ParseIP(options.KubernetesMasterConfig.MasterIP),
ReadWritePort: port,
DatabaseStorage: databaseStorage,
ExpDatabaseStorage: databaseStorage,
EventTTL: server.EventTTL,
//MinRequestTimeout: server.MinRequestTimeout,
ServiceClusterIPRange: (*net.IPNet)(&server.ServiceClusterIPRange),
ServiceNodePortRange: server.ServiceNodePortRange,
RequestContextMapper: requestContextMapper,
KubeletClient: kubeletClient,
APIPrefix: KubeAPIPrefix,
EnableCoreControllers: true,
MasterCount: options.KubernetesMasterConfig.MasterCount,
Authorizer: apiserver.NewAlwaysAllowAuthorizer(),
AdmissionControl: admissionController,
EnableV1Beta3: configapi.HasKubernetesAPILevel(*options.KubernetesMasterConfig, "v1beta3"),
DisableV1: !configapi.HasKubernetesAPILevel(*options.KubernetesMasterConfig, "v1"),
// Set the TLS options for proxying to pods and services
// Proxying to nodes uses the kubeletClient TLS config (so can provide a different cert, and verify the node hostname)
ProxyTLSClientConfig: &tls.Config{
// Proxying to pods and services cannot verify hostnames, since they are contacted on randomly allocated IPs
InsecureSkipVerify: true,
Certificates: proxyClientCerts,
},
}
kmaster := &MasterConfig{
Options: *options.KubernetesMasterConfig,
KubeClient: kubeClient,
Master: m,
ControllerManager: cmserver,
CloudProvider: cloud,
}
return kmaster, nil
}
// BuildMasterConfig builds and returns the OpenShift master configuration based on the
// provided options
func BuildMasterConfig(options configapi.MasterConfig) (*MasterConfig, error) {
client, err := etcd.EtcdClient(options.EtcdClientInfo)
if err != nil {
return nil, err
}
etcdClient, err := etcd.MakeNewEtcdClient(options.EtcdClientInfo)
if err != nil {
return nil, err
}
groupVersion := unversioned.GroupVersion{Group: "", Version: options.EtcdStorageConfig.OpenShiftStorageVersion}
etcdHelper, err := NewEtcdStorage(etcdClient, groupVersion, options.EtcdStorageConfig.OpenShiftStoragePrefix)
if err != nil {
return nil, fmt.Errorf("Error setting up server storage: %v", err)
}
clientCAs, err := configapi.GetClientCertCAPool(options)
if err != nil {
return nil, err
}
apiClientCAs, err := configapi.GetAPIClientCertCAPool(options)
if err != nil {
return nil, err
}
privilegedLoopbackKubeClient, _, err := configapi.GetKubeClient(options.MasterClients.OpenShiftLoopbackKubeConfig)
if err != nil {
return nil, err
}
privilegedLoopbackOpenShiftClient, privilegedLoopbackClientConfig, err := configapi.GetOpenShiftClient(options.MasterClients.OpenShiftLoopbackKubeConfig)
if err != nil {
return nil, err
}
imageTemplate := variable.NewDefaultImageTemplate()
imageTemplate.Format = options.ImageConfig.Format
imageTemplate.Latest = options.ImageConfig.Latest
policyCache, policyClient := newReadOnlyCacheAndClient(etcdHelper)
requestContextMapper := kapi.NewRequestContextMapper()
groupCache := usercache.NewGroupCache(groupregistry.NewRegistry(groupstorage.NewREST(etcdHelper)))
projectCache := projectcache.NewProjectCache(privilegedLoopbackKubeClient.Namespaces(), options.ProjectConfig.DefaultNodeSelector)
kubeletClientConfig := configapi.GetKubeletClientConfig(options)
// in-order list of plug-ins that should intercept admission decisions (origin only intercepts)
admissionControlPluginNames := []string{"OriginNamespaceLifecycle", "BuildByStrategy"}
if len(options.AdmissionConfig.PluginOrderOverride) > 0 {
admissionControlPluginNames = options.AdmissionConfig.PluginOrderOverride
}
pluginInitializer := oadmission.PluginInitializer{
OpenshiftClient: privilegedLoopbackOpenShiftClient,
ProjectCache: projectCache,
}
plugins := []admission.Interface{}
for _, pluginName := range admissionControlPluginNames {
configFile, err := pluginconfig.GetPluginConfig(options.AdmissionConfig.PluginConfig[pluginName])
if err != nil {
return nil, err
}
plugin := admission.InitPlugin(pluginName, privilegedLoopbackKubeClient, configFile)
if plugin != nil {
plugins = append(plugins, plugin)
}
}
pluginInitializer.Initialize(plugins)
// ensure that plugins have been properly initialized
if err := oadmission.Validate(plugins); err != nil {
return nil, err
}
admissionController := admission.NewChainHandler(plugins...)
serviceAccountTokenGetter, err := newServiceAccountTokenGetter(options, etcdClient)
if err != nil {
return nil, err
}
plug, plugStart := newControllerPlug(options, client)
authorizer := newAuthorizer(policyClient, options.ProjectConfig.ProjectRequestMessage)
config := &MasterConfig{
Options: options,
Authenticator: newAuthenticator(options, etcdHelper, serviceAccountTokenGetter, apiClientCAs, groupCache),
Authorizer: authorizer,
AuthorizationAttributeBuilder: newAuthorizationAttributeBuilder(requestContextMapper),
PolicyCache: policyCache,
GroupCache: groupCache,
ProjectAuthorizationCache: newProjectAuthorizationCache(authorizer, privilegedLoopbackKubeClient, policyClient),
ProjectCache: projectCache,
RequestContextMapper: requestContextMapper,
AdmissionControl: admissionController,
TLS: configapi.UseTLS(options.ServingInfo.ServingInfo),
ControllerPlug: plug,
ControllerPlugStart: plugStart,
ImageFor: imageTemplate.ExpandOrDie,
EtcdHelper: etcdHelper,
KubeletClientConfig: kubeletClientConfig,
ClientCAs: clientCAs,
APIClientCAs: apiClientCAs,
PrivilegedLoopbackClientConfig: *privilegedLoopbackClientConfig,
PrivilegedLoopbackOpenShiftClient: privilegedLoopbackOpenShiftClient,
PrivilegedLoopbackKubernetesClient: privilegedLoopbackKubeClient,
}
return config, nil
}
func BuildKubernetesMasterConfig(options configapi.MasterConfig, requestContextMapper kapi.RequestContextMapper, kubeClient *kclient.Client, pluginInitializer oadmission.PluginInitializer) (*MasterConfig, error) {
if options.KubernetesMasterConfig == nil {
return nil, errors.New("insufficient information to build KubernetesMasterConfig")
}
// Connect and setup etcd interfaces
etcdClient, err := etcd.MakeNewEtcdClient(options.EtcdClientInfo)
if err != nil {
return nil, err
}
kubeletClientConfig := configapi.GetKubeletClientConfig(options)
kubeletClient, err := kubeletclient.NewStaticKubeletClient(kubeletClientConfig)
if err != nil {
return nil, fmt.Errorf("unable to configure Kubelet client: %v", err)
}
// in-order list of plug-ins that should intercept admission decisions
// TODO: Push node environment support to upstream in future
_, portString, err := net.SplitHostPort(options.ServingInfo.BindAddress)
if err != nil {
return nil, err
}
port, err := strconv.Atoi(portString)
if err != nil {
return nil, err
}
portRange, err := knet.ParsePortRange(options.KubernetesMasterConfig.ServicesNodePortRange)
if err != nil {
return nil, err
}
podEvictionTimeout, err := time.ParseDuration(options.KubernetesMasterConfig.PodEvictionTimeout)
if err != nil {
return nil, fmt.Errorf("unable to parse PodEvictionTimeout: %v", err)
}
// Defaults are tested in TestAPIServerDefaults
server := apiserveroptions.NewAPIServer()
// Adjust defaults
server.EventTTL = 2 * time.Hour
server.ServiceClusterIPRange = net.IPNet(flagtypes.DefaultIPNet(options.KubernetesMasterConfig.ServicesSubnet))
server.ServiceNodePortRange = *portRange
server.AdmissionControl = strings.Join(AdmissionPlugins, ",")
server.EnableLogsSupport = false // don't expose server logs
// resolve extended arguments
// TODO: this should be done in config validation (along with the above) so we can provide
// proper errors
if err := cmdflags.Resolve(options.KubernetesMasterConfig.APIServerArguments, server.AddFlags); len(err) > 0 {
return nil, kerrors.NewAggregate(err)
}
if len(options.KubernetesMasterConfig.AdmissionConfig.PluginOrderOverride) > 0 {
server.AdmissionControl = strings.Join(options.KubernetesMasterConfig.AdmissionConfig.PluginOrderOverride, ",")
}
// Defaults are tested in TestCMServerDefaults
cmserver := cmapp.NewCMServer()
// Adjust defaults
cmserver.Address = "" // no healthz endpoint
cmserver.Port = 0 // no healthz endpoint
cmserver.PodEvictionTimeout = unversioned.Duration{Duration: podEvictionTimeout}
// resolve extended arguments
// TODO: this should be done in config validation (along with the above) so we can provide
// proper errors
if err := cmdflags.Resolve(options.KubernetesMasterConfig.ControllerArguments, cmserver.AddFlags); len(err) > 0 {
return nil, kerrors.NewAggregate(err)
}
cloud, err := cloudprovider.InitCloudProvider(cmserver.CloudProvider, cmserver.CloudConfigFile)
if err != nil {
return nil, err
}
if cloud != nil {
glog.V(2).Infof("Successfully initialized cloud provider: %q from the config file: %q\n", server.CloudProvider, server.CloudConfigFile)
}
plugins := []admission.Interface{}
for _, pluginName := range strings.Split(server.AdmissionControl, ",") {
switch pluginName {
case serviceadmit.ExternalIPPluginName:
// this needs to be moved upstream to be part of core config
reject, admit, err := serviceadmit.ParseCIDRRules(options.NetworkConfig.ExternalIPNetworkCIDRs)
if err != nil {
// should have been caught with validation
return nil, err
}
plugins = append(plugins, serviceadmit.NewExternalIPRanger(reject, admit))
case saadmit.PluginName:
// we need to set some custom parameters on the service account admission controller, so create that one by hand
saAdmitter := saadmit.NewServiceAccount(internalclientset.FromUnversionedClient(kubeClient))
saAdmitter.LimitSecretReferences = options.ServiceAccountConfig.LimitSecretReferences
saAdmitter.Run()
plugins = append(plugins, saAdmitter)
default:
configFile, err := pluginconfig.GetPluginConfigFile(options.KubernetesMasterConfig.AdmissionConfig.PluginConfig, pluginName, server.AdmissionControlConfigFile)
if err != nil {
return nil, err
}
plugin := admission.InitPlugin(pluginName, internalclientset.FromUnversionedClient(kubeClient), configFile)
if plugin != nil {
plugins = append(plugins, plugin)
}
}
}
pluginInitializer.Initialize(plugins)
// ensure that plugins have been properly initialized
if err := oadmission.Validate(plugins); err != nil {
return nil, err
}
admissionController := admission.NewChainHandler(plugins...)
var proxyClientCerts []tls.Certificate
if len(options.KubernetesMasterConfig.ProxyClientInfo.CertFile) > 0 {
clientCert, err := tls.LoadX509KeyPair(
options.KubernetesMasterConfig.ProxyClientInfo.CertFile,
options.KubernetesMasterConfig.ProxyClientInfo.KeyFile,
)
if err != nil {
return nil, err
}
proxyClientCerts = append(proxyClientCerts, clientCert)
}
// TODO you have to know every APIGroup you're enabling or upstream will panic. It's alternative to panicing is Fataling
// It needs a refactor to return errors
storageDestinations := genericapiserver.NewStorageDestinations()
// storageVersions is a map from API group to allowed versions that must be a version exposed by the REST API or it breaks.
// We need to fix the upstream to stop using the storage version as a preferred api version.
storageVersions := map[string]string{}
enabledKubeVersions := configapi.GetEnabledAPIVersionsForGroup(*options.KubernetesMasterConfig, configapi.APIGroupKube)
if len(enabledKubeVersions) > 0 {
kubeStorageVersion := unversioned.GroupVersion{Group: configapi.APIGroupKube, Version: options.EtcdStorageConfig.KubernetesStorageVersion}
databaseStorage, err := NewEtcdStorage(etcdClient, kubeStorageVersion, options.EtcdStorageConfig.KubernetesStoragePrefix)
if err != nil {
return nil, fmt.Errorf("Error setting up Kubernetes server storage: %v", err)
}
storageDestinations.AddAPIGroup(configapi.APIGroupKube, databaseStorage)
storageVersions[configapi.APIGroupKube] = options.EtcdStorageConfig.KubernetesStorageVersion
}
// enable this if extensions API is enabled (or batch or autoscaling, since they persist to extensions/v1beta1 for now)
// TODO: replace this with a loop over configured storage versions
extensionsEnabled := len(configapi.GetEnabledAPIVersionsForGroup(*options.KubernetesMasterConfig, configapi.APIGroupExtensions)) > 0
batchEnabled := len(configapi.GetEnabledAPIVersionsForGroup(*options.KubernetesMasterConfig, configapi.APIGroupBatch)) > 0
autoscalingEnabled := len(configapi.GetEnabledAPIVersionsForGroup(*options.KubernetesMasterConfig, configapi.APIGroupAutoscaling)) > 0
if extensionsEnabled || autoscalingEnabled || batchEnabled {
// TODO: replace this with a configured storage version for extensions once configuration exposes this
extensionsStorageVersion := unversioned.GroupVersion{Group: extensions.GroupName, Version: "v1beta1"}
databaseStorage, err := NewEtcdStorage(etcdClient, extensionsStorageVersion, options.EtcdStorageConfig.KubernetesStoragePrefix)
if err != nil {
return nil, fmt.Errorf("Error setting up Kubernetes extensions server storage: %v", err)
}
storageDestinations.AddAPIGroup(configapi.APIGroupExtensions, databaseStorage)
storageVersions[configapi.APIGroupExtensions] = extensionsStorageVersion.String()
}
// Preserve previous behavior of using the first non-loopback address
// TODO: Deprecate this behavior and just require a valid value to be passed in
publicAddress := net.ParseIP(options.KubernetesMasterConfig.MasterIP)
if publicAddress == nil || publicAddress.IsUnspecified() || publicAddress.IsLoopback() {
hostIP, err := knet.ChooseHostInterface()
if err != nil {
glog.Fatalf("Unable to find suitable network address.error='%v'. Set the masterIP directly to avoid this error.", err)
}
publicAddress = hostIP
glog.Infof("Will report %v as public IP address.", publicAddress)
}
m := &master.Config{
Config: &genericapiserver.Config{
PublicAddress: publicAddress,
ReadWritePort: port,
Authorizer: apiserver.NewAlwaysAllowAuthorizer(),
AdmissionControl: admissionController,
StorageDestinations: storageDestinations,
StorageVersions: storageVersions,
ServiceClusterIPRange: (*net.IPNet)(&server.ServiceClusterIPRange),
ServiceNodePortRange: server.ServiceNodePortRange,
RequestContextMapper: requestContextMapper,
APIGroupVersionOverrides: getAPIGroupVersionOverrides(options),
APIPrefix: KubeAPIPrefix,
APIGroupPrefix: KubeAPIGroupPrefix,
MasterCount: options.KubernetesMasterConfig.MasterCount,
// Set the TLS options for proxying to pods and services
// Proxying to nodes uses the kubeletClient TLS config (so can provide a different cert, and verify the node hostname)
ProxyTLSClientConfig: &tls.Config{
// Proxying to pods and services cannot verify hostnames, since they are contacted on randomly allocated IPs
InsecureSkipVerify: true,
Certificates: proxyClientCerts,
},
Serializer: kapi.Codecs,
},
EventTTL: server.EventTTL,
//MinRequestTimeout: server.MinRequestTimeout,
KubeletClient: kubeletClient,
EnableCoreControllers: true,
}
if options.DNSConfig != nil {
_, dnsPortStr, err := net.SplitHostPort(options.DNSConfig.BindAddress)
if err != nil {
return nil, fmt.Errorf("unable to parse DNS bind address %s: %v", options.DNSConfig.BindAddress, err)
}
dnsPort, err := strconv.Atoi(dnsPortStr)
if err != nil {
return nil, fmt.Errorf("invalid DNS port: %v", err)
}
m.ExtraServicePorts = append(m.ExtraServicePorts,
kapi.ServicePort{Name: "dns", Port: 53, Protocol: kapi.ProtocolUDP, TargetPort: intstr.FromInt(dnsPort)},
kapi.ServicePort{Name: "dns-tcp", Port: 53, Protocol: kapi.ProtocolTCP, TargetPort: intstr.FromInt(dnsPort)},
)
m.ExtraEndpointPorts = append(m.ExtraEndpointPorts,
kapi.EndpointPort{Name: "dns", Port: dnsPort, Protocol: kapi.ProtocolUDP},
kapi.EndpointPort{Name: "dns-tcp", Port: dnsPort, Protocol: kapi.ProtocolTCP},
)
}
kmaster := &MasterConfig{
Options: *options.KubernetesMasterConfig,
KubeClient: kubeClient,
Master: m,
ControllerManager: cmserver,
CloudProvider: cloud,
}
return kmaster, nil
}
// BuildMasterConfig builds and returns the OpenShift master configuration based on the
// provided options
func BuildMasterConfig(options configapi.MasterConfig) (*MasterConfig, error) {
client, err := etcd.EtcdClient(options.EtcdClientInfo)
if err != nil {
return nil, err
}
etcdClient, err := etcd.MakeNewEtcdClient(options.EtcdClientInfo)
if err != nil {
return nil, err
}
groupVersion := unversioned.GroupVersion{Group: "", Version: options.EtcdStorageConfig.OpenShiftStorageVersion}
etcdHelper, err := NewEtcdStorage(etcdClient, groupVersion, options.EtcdStorageConfig.OpenShiftStoragePrefix)
if err != nil {
return nil, fmt.Errorf("Error setting up server storage: %v", err)
}
restOptsGetter := restoptions.NewConfigGetter(options)
clientCAs, err := configapi.GetClientCertCAPool(options)
if err != nil {
return nil, err
}
apiClientCAs, err := configapi.GetAPIClientCertCAPool(options)
if err != nil {
return nil, err
}
privilegedLoopbackKubeClient, _, err := configapi.GetKubeClient(options.MasterClients.OpenShiftLoopbackKubeConfig)
if err != nil {
return nil, err
}
privilegedLoopbackOpenShiftClient, privilegedLoopbackClientConfig, err := configapi.GetOpenShiftClient(options.MasterClients.OpenShiftLoopbackKubeConfig)
if err != nil {
return nil, err
}
customListerWatchers := shared.DefaultListerWatcherOverrides{}
if err := addAuthorizationListerWatchers(customListerWatchers, restOptsGetter); err != nil {
return nil, err
}
informerFactory := shared.NewInformerFactory(privilegedLoopbackKubeClient, privilegedLoopbackOpenShiftClient, customListerWatchers, 10*time.Minute)
imageTemplate := variable.NewDefaultImageTemplate()
imageTemplate.Format = options.ImageConfig.Format
imageTemplate.Latest = options.ImageConfig.Latest
requestContextMapper := kapi.NewRequestContextMapper()
groupStorage, err := groupstorage.NewREST(restOptsGetter)
if err != nil {
return nil, err
}
groupCache := usercache.NewGroupCache(groupregistry.NewRegistry(groupStorage))
projectCache := projectcache.NewProjectCache(privilegedLoopbackKubeClient.Namespaces(), options.ProjectConfig.DefaultNodeSelector)
clusterQuotaMappingController := clusterquotamapping.NewClusterQuotaMappingController(informerFactory.Namespaces(), informerFactory.ClusterResourceQuotas())
kubeletClientConfig := configapi.GetKubeletClientConfig(options)
// in-order list of plug-ins that should intercept admission decisions (origin only intercepts)
admissionControlPluginNames := []string{
"ProjectRequestLimit",
"OriginNamespaceLifecycle",
"PodNodeConstraints",
"JenkinsBootstrapper",
"BuildByStrategy",
imageadmission.PluginName,
quotaadmission.PluginName,
}
if len(options.AdmissionConfig.PluginOrderOverride) > 0 {
admissionControlPluginNames = options.AdmissionConfig.PluginOrderOverride
}
quotaRegistry := quota.NewOriginQuotaRegistry(privilegedLoopbackOpenShiftClient)
ruleResolver := rulevalidation.NewDefaultRuleResolver(
informerFactory.Policies().Lister(),
informerFactory.PolicyBindings().Lister(),
informerFactory.ClusterPolicies().Lister().ClusterPolicies(),
informerFactory.ClusterPolicyBindings().Lister().ClusterPolicyBindings(),
)
authorizer := newAuthorizer(ruleResolver, informerFactory, options.ProjectConfig.ProjectRequestMessage)
pluginInitializer := oadmission.PluginInitializer{
OpenshiftClient: privilegedLoopbackOpenShiftClient,
ProjectCache: projectCache,
OriginQuotaRegistry: quotaRegistry,
Authorizer: authorizer,
JenkinsPipelineConfig: options.JenkinsPipelineConfig,
RESTClientConfig: *privilegedLoopbackClientConfig,
}
plugins := []admission.Interface{}
clientsetClient := clientadapter.FromUnversionedClient(privilegedLoopbackKubeClient)
for _, pluginName := range admissionControlPluginNames {
configFile, err := pluginconfig.GetPluginConfig(options.AdmissionConfig.PluginConfig[pluginName])
if err != nil {
return nil, err
}
plugin := admission.InitPlugin(pluginName, clientsetClient, configFile)
if plugin != nil {
plugins = append(plugins, plugin)
}
}
pluginInitializer.Initialize(plugins)
// ensure that plugins have been properly initialized
if err := oadmission.Validate(plugins); err != nil {
return nil, err
}
admissionController := admission.NewChainHandler(plugins...)
// TODO: look up storage by resource
serviceAccountTokenGetter, err := newServiceAccountTokenGetter(options, etcdClient)
if err != nil {
return nil, err
}
authenticator, err := newAuthenticator(options, restOptsGetter, serviceAccountTokenGetter, apiClientCAs, groupCache)
if err != nil {
return nil, err
}
plug, plugStart := newControllerPlug(options, client)
config := &MasterConfig{
Options: options,
RESTOptionsGetter: restOptsGetter,
RuleResolver: ruleResolver,
Authenticator: authenticator,
Authorizer: authorizer,
AuthorizationAttributeBuilder: newAuthorizationAttributeBuilder(requestContextMapper),
GroupCache: groupCache,
ProjectAuthorizationCache: newProjectAuthorizationCache(authorizer, privilegedLoopbackKubeClient, informerFactory),
ProjectCache: projectCache,
ClusterQuotaMappingController: clusterQuotaMappingController,
RequestContextMapper: requestContextMapper,
AdmissionControl: admissionController,
TLS: configapi.UseTLS(options.ServingInfo.ServingInfo),
ControllerPlug: plug,
ControllerPlugStart: plugStart,
ImageFor: imageTemplate.ExpandOrDie,
EtcdHelper: etcdHelper,
KubeletClientConfig: kubeletClientConfig,
ClientCAs: clientCAs,
APIClientCAs: apiClientCAs,
PluginInitializer: pluginInitializer,
PrivilegedLoopbackClientConfig: *privilegedLoopbackClientConfig,
PrivilegedLoopbackOpenShiftClient: privilegedLoopbackOpenShiftClient,
PrivilegedLoopbackKubernetesClient: privilegedLoopbackKubeClient,
Informers: informerFactory,
}
return config, nil
}
func newAdmissionChain(pluginNames []string, admissionConfigFilename string, pluginConfig map[string]configapi.AdmissionPluginConfig, options configapi.MasterConfig, kubeClientSet *internalclientset.Clientset, pluginInitializer oadmission.PluginInitializer) (admission.Interface, error) {
plugins := []admission.Interface{}
for _, pluginName := range pluginNames {
switch pluginName {
case lifecycle.PluginName:
// We need to include our infrastructure and shared resource namespaces in the immortal namespaces list
immortalNamespaces := sets.NewString(kapi.NamespaceDefault)
if len(options.PolicyConfig.OpenShiftSharedResourcesNamespace) > 0 {
immortalNamespaces.Insert(options.PolicyConfig.OpenShiftSharedResourcesNamespace)
}
if len(options.PolicyConfig.OpenShiftInfrastructureNamespace) > 0 {
immortalNamespaces.Insert(options.PolicyConfig.OpenShiftInfrastructureNamespace)
}
plugins = append(plugins, lifecycle.NewLifecycle(kubeClientSet, immortalNamespaces))
case serviceadmit.ExternalIPPluginName:
// this needs to be moved upstream to be part of core config
reject, admit, err := serviceadmit.ParseRejectAdmitCIDRRules(options.NetworkConfig.ExternalIPNetworkCIDRs)
if err != nil {
// should have been caught with validation
return nil, err
}
plugins = append(plugins, serviceadmit.NewExternalIPRanger(reject, admit))
case serviceadmit.RestrictedEndpointsPluginName:
// we need to set some customer parameters, so create by hand
restrictedNetworks, err := serviceadmit.ParseSimpleCIDRRules([]string{options.NetworkConfig.ClusterNetworkCIDR, options.NetworkConfig.ServiceNetworkCIDR})
if err != nil {
// should have been caught with validation
return nil, err
}
plugins = append(plugins, serviceadmit.NewRestrictedEndpointsAdmission(restrictedNetworks))
case saadmit.PluginName:
// we need to set some custom parameters on the service account admission controller, so create that one by hand
saAdmitter := saadmit.NewServiceAccount(kubeClientSet)
saAdmitter.LimitSecretReferences = options.ServiceAccountConfig.LimitSecretReferences
saAdmitter.Run()
plugins = append(plugins, saAdmitter)
default:
configFile, err := pluginconfig.GetPluginConfigFile(pluginConfig, pluginName, admissionConfigFilename)
if err != nil {
return nil, err
}
plugin := admission.InitPlugin(pluginName, kubeClientSet, configFile)
if plugin != nil {
plugins = append(plugins, plugin)
}
}
}
pluginInitializer.Initialize(plugins)
// ensure that plugins have been properly initialized
if err := oadmission.Validate(plugins); err != nil {
return nil, err
}
return admission.NewChainHandler(plugins...), nil
}
func BuildKubernetesMasterConfig(options configapi.MasterConfig, requestContextMapper kapi.RequestContextMapper, kubeClient *kclient.Client, informers shared.InformerFactory, pluginInitializer oadmission.PluginInitializer) (*MasterConfig, error) {
if options.KubernetesMasterConfig == nil {
return nil, errors.New("insufficient information to build KubernetesMasterConfig")
}
kubeletClientConfig := configapi.GetKubeletClientConfig(options)
kubeletClient, err := kubeletclient.NewStaticKubeletClient(kubeletClientConfig)
if err != nil {
return nil, fmt.Errorf("unable to configure Kubelet client: %v", err)
}
// in-order list of plug-ins that should intercept admission decisions
// TODO: Push node environment support to upstream in future
_, portString, err := net.SplitHostPort(options.ServingInfo.BindAddress)
if err != nil {
return nil, err
}
port, err := strconv.Atoi(portString)
if err != nil {
return nil, err
}
portRange, err := knet.ParsePortRange(options.KubernetesMasterConfig.ServicesNodePortRange)
if err != nil {
return nil, err
}
podEvictionTimeout, err := time.ParseDuration(options.KubernetesMasterConfig.PodEvictionTimeout)
if err != nil {
return nil, fmt.Errorf("unable to parse PodEvictionTimeout: %v", err)
}
// Defaults are tested in TestAPIServerDefaults
server := apiserveroptions.NewAPIServer()
// Adjust defaults
server.EventTTL = 2 * time.Hour
server.ServiceClusterIPRange = net.IPNet(flagtypes.DefaultIPNet(options.KubernetesMasterConfig.ServicesSubnet))
server.ServiceNodePortRange = *portRange
server.AdmissionControl = strings.Join(AdmissionPlugins, ",")
server.EnableLogsSupport = false // don't expose server logs
server.EnableProfiling = false
server.APIPrefix = KubeAPIPrefix
server.APIGroupPrefix = KubeAPIGroupPrefix
server.SecurePort = port
server.MasterCount = options.KubernetesMasterConfig.MasterCount
// resolve extended arguments
// TODO: this should be done in config validation (along with the above) so we can provide
// proper errors
if err := cmdflags.Resolve(options.KubernetesMasterConfig.APIServerArguments, server.AddFlags); len(err) > 0 {
return nil, kerrors.NewAggregate(err)
}
if len(options.KubernetesMasterConfig.AdmissionConfig.PluginOrderOverride) > 0 {
server.AdmissionControl = strings.Join(options.KubernetesMasterConfig.AdmissionConfig.PluginOrderOverride, ",")
}
// Defaults are tested in TestCMServerDefaults
cmserver := cmapp.NewCMServer()
// Adjust defaults
cmserver.Address = "" // no healthz endpoint
cmserver.Port = 0 // no healthz endpoint
cmserver.PodEvictionTimeout = unversioned.Duration{Duration: podEvictionTimeout}
cmserver.VolumeConfiguration.EnableDynamicProvisioning = options.VolumeConfig.DynamicProvisioningEnabled
// resolve extended arguments
// TODO: this should be done in config validation (along with the above) so we can provide
// proper errors
if err := cmdflags.Resolve(options.KubernetesMasterConfig.ControllerArguments, cmserver.AddFlags); len(err) > 0 {
return nil, kerrors.NewAggregate(err)
}
cloud, err := cloudprovider.InitCloudProvider(cmserver.CloudProvider, cmserver.CloudConfigFile)
if err != nil {
return nil, err
}
if cloud != nil {
glog.V(2).Infof("Successfully initialized cloud provider: %q from the config file: %q\n", server.CloudProvider, server.CloudConfigFile)
}
plugins := []admission.Interface{}
for _, pluginName := range strings.Split(server.AdmissionControl, ",") {
switch pluginName {
case lifecycle.PluginName:
// We need to include our infrastructure and shared resource namespaces in the immortal namespaces list
immortalNamespaces := sets.NewString(kapi.NamespaceDefault)
if len(options.PolicyConfig.OpenShiftSharedResourcesNamespace) > 0 {
immortalNamespaces.Insert(options.PolicyConfig.OpenShiftSharedResourcesNamespace)
}
if len(options.PolicyConfig.OpenShiftInfrastructureNamespace) > 0 {
immortalNamespaces.Insert(options.PolicyConfig.OpenShiftInfrastructureNamespace)
}
plugins = append(plugins, lifecycle.NewLifecycle(clientadapter.FromUnversionedClient(kubeClient), immortalNamespaces))
case serviceadmit.ExternalIPPluginName:
// this needs to be moved upstream to be part of core config
reject, admit, err := serviceadmit.ParseCIDRRules(options.NetworkConfig.ExternalIPNetworkCIDRs)
if err != nil {
// should have been caught with validation
return nil, err
}
plugins = append(plugins, serviceadmit.NewExternalIPRanger(reject, admit))
case saadmit.PluginName:
// we need to set some custom parameters on the service account admission controller, so create that one by hand
saAdmitter := saadmit.NewServiceAccount(clientadapter.FromUnversionedClient(kubeClient))
saAdmitter.LimitSecretReferences = options.ServiceAccountConfig.LimitSecretReferences
saAdmitter.Run()
plugins = append(plugins, saAdmitter)
default:
configFile, err := pluginconfig.GetPluginConfigFile(options.KubernetesMasterConfig.AdmissionConfig.PluginConfig, pluginName, server.AdmissionControlConfigFile)
if err != nil {
return nil, err
}
plugin := admission.InitPlugin(pluginName, clientadapter.FromUnversionedClient(kubeClient), configFile)
if plugin != nil {
plugins = append(plugins, plugin)
}
}
}
pluginInitializer.Initialize(plugins)
// ensure that plugins have been properly initialized
if err := oadmission.Validate(plugins); err != nil {
return nil, err
}
admissionController := admission.NewChainHandler(plugins...)
var proxyClientCerts []tls.Certificate
if len(options.KubernetesMasterConfig.ProxyClientInfo.CertFile) > 0 {
clientCert, err := tls.LoadX509KeyPair(
options.KubernetesMasterConfig.ProxyClientInfo.CertFile,
options.KubernetesMasterConfig.ProxyClientInfo.KeyFile,
)
if err != nil {
return nil, err
}
proxyClientCerts = append(proxyClientCerts, clientCert)
}
resourceEncodingConfig := genericapiserver.NewDefaultResourceEncodingConfig()
resourceEncodingConfig.SetVersionEncoding(
kapi.GroupName,
unversioned.GroupVersion{Group: kapi.GroupName, Version: options.EtcdStorageConfig.KubernetesStorageVersion},
kapi.SchemeGroupVersion,
)
resourceEncodingConfig.SetVersionEncoding(
extensions.GroupName,
unversioned.GroupVersion{Group: extensions.GroupName, Version: "v1beta1"},
extensions.SchemeGroupVersion,
)
resourceEncodingConfig.SetVersionEncoding(
batch.GroupName,
unversioned.GroupVersion{Group: batch.GroupName, Version: "v1"},
batch.SchemeGroupVersion,
)
resourceEncodingConfig.SetVersionEncoding(
autoscaling.GroupName,
unversioned.GroupVersion{Group: autoscaling.GroupName, Version: "v1"},
autoscaling.SchemeGroupVersion,
)
etcdConfig := storagebackend.Config{
Prefix: options.EtcdStorageConfig.KubernetesStoragePrefix,
ServerList: options.EtcdClientInfo.URLs,
KeyFile: options.EtcdClientInfo.ClientCert.KeyFile,
CertFile: options.EtcdClientInfo.ClientCert.CertFile,
CAFile: options.EtcdClientInfo.CA,
DeserializationCacheSize: genericapiserveroptions.DefaultDeserializationCacheSize,
}
storageFactory := genericapiserver.NewDefaultStorageFactory(etcdConfig, "", kapi.Codecs, resourceEncodingConfig, master.DefaultAPIResourceConfigSource())
// the order here is important, it defines which version will be used for storage
storageFactory.AddCohabitatingResources(extensions.Resource("jobs"), batch.Resource("jobs"))
storageFactory.AddCohabitatingResources(extensions.Resource("horizontalpodautoscalers"), autoscaling.Resource("horizontalpodautoscalers"))
// Preserve previous behavior of using the first non-loopback address
// TODO: Deprecate this behavior and just require a valid value to be passed in
publicAddress := net.ParseIP(options.KubernetesMasterConfig.MasterIP)
if publicAddress == nil || publicAddress.IsUnspecified() || publicAddress.IsLoopback() {
hostIP, err := knet.ChooseHostInterface()
if err != nil {
glog.Fatalf("Unable to find suitable network address.error='%v'. Set the masterIP directly to avoid this error.", err)
}
publicAddress = hostIP
glog.Infof("Will report %v as public IP address.", publicAddress)
}
m := &master.Config{
Config: &genericapiserver.Config{
PublicAddress: publicAddress,
ReadWritePort: port,
Authorizer: apiserver.NewAlwaysAllowAuthorizer(),
AdmissionControl: admissionController,
StorageFactory: storageFactory,
ServiceClusterIPRange: (*net.IPNet)(&server.ServiceClusterIPRange),
ServiceNodePortRange: server.ServiceNodePortRange,
RequestContextMapper: requestContextMapper,
APIResourceConfigSource: getAPIResourceConfig(options),
APIPrefix: server.APIPrefix,
APIGroupPrefix: server.APIGroupPrefix,
MasterCount: server.MasterCount,
// Set the TLS options for proxying to pods and services
// Proxying to nodes uses the kubeletClient TLS config (so can provide a different cert, and verify the node hostname)
ProxyTLSClientConfig: &tls.Config{
// Proxying to pods and services cannot verify hostnames, since they are contacted on randomly allocated IPs
InsecureSkipVerify: true,
Certificates: proxyClientCerts,
},
Serializer: kapi.Codecs,
EnableLogsSupport: server.EnableLogsSupport,
EnableProfiling: server.EnableProfiling,
EnableWatchCache: server.EnableWatchCache,
MasterServiceNamespace: server.MasterServiceNamespace,
ExternalHost: server.ExternalHost,
MinRequestTimeout: server.MinRequestTimeout,
KubernetesServiceNodePort: server.KubernetesServiceNodePort,
},
EventTTL: server.EventTTL,
KubeletClient: kubeletClient,
EnableCoreControllers: true,
DeleteCollectionWorkers: server.DeleteCollectionWorkers,
}
if server.EnableWatchCache {
cachesize.SetWatchCacheSizes(server.WatchCacheSizes)
}
if options.DNSConfig != nil {
_, dnsPortStr, err := net.SplitHostPort(options.DNSConfig.BindAddress)
if err != nil {
return nil, fmt.Errorf("unable to parse DNS bind address %s: %v", options.DNSConfig.BindAddress, err)
}
dnsPort, err := strconv.Atoi(dnsPortStr)
if err != nil {
return nil, fmt.Errorf("invalid DNS port: %v", err)
}
m.ExtraServicePorts = append(m.ExtraServicePorts,
kapi.ServicePort{Name: "dns", Port: 53, Protocol: kapi.ProtocolUDP, TargetPort: intstr.FromInt(dnsPort)},
kapi.ServicePort{Name: "dns-tcp", Port: 53, Protocol: kapi.ProtocolTCP, TargetPort: intstr.FromInt(dnsPort)},
)
m.ExtraEndpointPorts = append(m.ExtraEndpointPorts,
kapi.EndpointPort{Name: "dns", Port: int32(dnsPort), Protocol: kapi.ProtocolUDP},
kapi.EndpointPort{Name: "dns-tcp", Port: int32(dnsPort), Protocol: kapi.ProtocolTCP},
)
}
kmaster := &MasterConfig{
Options: *options.KubernetesMasterConfig,
KubeClient: kubeClient,
Master: m,
ControllerManager: cmserver,
CloudProvider: cloud,
Informers: informers,
}
return kmaster, nil
}