Esempio n. 1
0
/*
 * generate division.
 * generates one of:
 *	res = nl / nr
 *	res = nl % nr
 * according to op.
 */
func dodiv(op gc.Op, nl *gc.Node, nr *gc.Node, res *gc.Node) {
	t := nl.Type

	t0 := t

	if t.Width < 8 {
		if t.IsSigned() {
			t = gc.Types[gc.TINT64]
		} else {
			t = gc.Types[gc.TUINT64]
		}
	}

	a := optoas(gc.ODIV, t)

	var tl gc.Node
	gc.Regalloc(&tl, t0, nil)
	var tr gc.Node
	gc.Regalloc(&tr, t0, nil)
	if nl.Ullman >= nr.Ullman {
		gc.Cgen(nl, &tl)
		gc.Cgen(nr, &tr)
	} else {
		gc.Cgen(nr, &tr)
		gc.Cgen(nl, &tl)
	}

	if t != t0 {
		// Convert
		tl2 := tl

		tr2 := tr
		tl.Type = t
		tr.Type = t
		gmove(&tl2, &tl)
		gmove(&tr2, &tr)
	}

	// Handle divide-by-zero panic.
	p1 := ginsbranch(mips.ABNE, nil, &tr, nil, 0)
	if panicdiv == nil {
		panicdiv = gc.Sysfunc("panicdivide")
	}
	gc.Ginscall(panicdiv, -1)
	gc.Patch(p1, gc.Pc)

	gins3(a, &tr, &tl, nil)
	gc.Regfree(&tr)
	if op == gc.ODIV {
		var lo gc.Node
		gc.Nodreg(&lo, gc.Types[gc.TUINT64], mips.REG_LO)
		gins(mips.AMOVV, &lo, &tl)
	} else { // remainder in REG_HI
		var hi gc.Node
		gc.Nodreg(&hi, gc.Types[gc.TUINT64], mips.REG_HI)
		gins(mips.AMOVV, &hi, &tl)
	}
	gmove(&tl, res)
	gc.Regfree(&tl)
}
Esempio n. 2
0
/*
 * generate array index into res.
 * n might be any size; res is 32-bit.
 * returns Prog* to patch to panic call.
 */
func cgenindex(n *gc.Node, res *gc.Node, bounded bool) *obj.Prog {
	if !gc.Is64(n.Type) {
		gc.Cgen(n, res)
		return nil
	}

	var tmp gc.Node
	gc.Tempname(&tmp, gc.Types[gc.TINT64])
	gc.Cgen(n, &tmp)
	var lo gc.Node
	var hi gc.Node
	split64(&tmp, &lo, &hi)
	gmove(&lo, res)
	if bounded {
		splitclean()
		return nil
	}

	var n1 gc.Node
	gc.Regalloc(&n1, gc.Types[gc.TINT32], nil)
	var n2 gc.Node
	gc.Regalloc(&n2, gc.Types[gc.TINT32], nil)
	var zero gc.Node
	gc.Nodconst(&zero, gc.Types[gc.TINT32], 0)
	gmove(&hi, &n1)
	gmove(&zero, &n2)
	gins(arm.ACMP, &n1, &n2)
	gc.Regfree(&n2)
	gc.Regfree(&n1)
	splitclean()
	return gc.Gbranch(arm.ABNE, nil, -1)
}
Esempio n. 3
0
/*
 * generate high multiply:
 *   res = (nl*nr) >> width
 */
func cgen_hmul(nl *gc.Node, nr *gc.Node, res *gc.Node) {
	t := nl.Type
	a := optoas(gc.OHMUL, t)
	if nl.Ullman < nr.Ullman {
		nl, nr = nr, nl
	}

	var n1 gc.Node
	gc.Cgenr(nl, &n1, res)
	var n2 gc.Node
	gc.Cgenr(nr, &n2, nil)
	var ax, oldax, dx, olddx gc.Node
	savex(x86.REG_AX, &ax, &oldax, res, gc.Types[gc.TUINT64])
	savex(x86.REG_DX, &dx, &olddx, res, gc.Types[gc.TUINT64])
	gmove(&n1, &ax)
	gins(a, &n2, nil)
	gc.Regfree(&n2)
	gc.Regfree(&n1)

	if t.Width == 1 {
		// byte multiply behaves differently.
		var byteAH, byteDX gc.Node
		gc.Nodreg(&byteAH, t, x86.REG_AH)
		gc.Nodreg(&byteDX, t, x86.REG_DX)
		gmove(&byteAH, &byteDX)
	}
	gmove(&dx, res)

	restx(&ax, &oldax)
	restx(&dx, &olddx)
}
Esempio n. 4
0
func ginscmp(op gc.Op, t *gc.Type, n1, n2 *gc.Node, likely int) *obj.Prog {
	if t.IsInteger() && n1.Op == gc.OLITERAL && n1.Int64() == 0 && n2.Op != gc.OLITERAL {
		op = gc.Brrev(op)
		n1, n2 = n2, n1
	}
	var r1, r2, g1, g2 gc.Node
	gc.Regalloc(&r1, t, n1)
	gc.Regalloc(&g1, n1.Type, &r1)
	gc.Cgen(n1, &g1)
	gmove(&g1, &r1)
	if t.IsInteger() && n2.Op == gc.OLITERAL && n2.Int64() == 0 {
		gins(arm.ACMP, &r1, n2)
	} else {
		gc.Regalloc(&r2, t, n2)
		gc.Regalloc(&g2, n1.Type, &r2)
		gc.Cgen(n2, &g2)
		gmove(&g2, &r2)
		gins(optoas(gc.OCMP, t), &r1, &r2)
		gc.Regfree(&g2)
		gc.Regfree(&r2)
	}
	gc.Regfree(&g1)
	gc.Regfree(&r1)
	return gc.Gbranch(optoas(op, t), nil, likely)
}
Esempio n. 5
0
func ginscmp(op gc.Op, t *gc.Type, n1, n2 *gc.Node, likely int) *obj.Prog {
	if t.IsInteger() && n1.Op == gc.OLITERAL && n2.Op != gc.OLITERAL {
		// Reverse comparison to place constant last.
		op = gc.Brrev(op)
		n1, n2 = n2, n1
	}

	var r1, r2, g1, g2 gc.Node
	gc.Regalloc(&r1, t, n1)
	gc.Regalloc(&g1, n1.Type, &r1)
	gc.Cgen(n1, &g1)
	gmove(&g1, &r1)
	if t.IsInteger() && gc.Isconst(n2, gc.CTINT) {
		ginscon2(optoas(gc.OCMP, t), &r1, n2.Int64())
	} else {
		gc.Regalloc(&r2, t, n2)
		gc.Regalloc(&g2, n1.Type, &r2)
		gc.Cgen(n2, &g2)
		gmove(&g2, &r2)
		gcmp(optoas(gc.OCMP, t), &r1, &r2)
		gc.Regfree(&g2)
		gc.Regfree(&r2)
	}
	gc.Regfree(&g1)
	gc.Regfree(&r1)
	return gc.Gbranch(optoas(op, t), nil, likely)
}
Esempio n. 6
0
/*
 * generate byte multiply:
 *	res = nl * nr
 * there is no 2-operand byte multiply instruction so
 * we do a full-width multiplication and truncate afterwards.
 */
func cgen_bmul(op gc.Op, nl *gc.Node, nr *gc.Node, res *gc.Node) bool {
	if optoas(op, nl.Type) != x86.AIMULB {
		return false
	}

	// copy from byte to full registers
	t := gc.Types[gc.TUINT32]

	if nl.Type.IsSigned() {
		t = gc.Types[gc.TINT32]
	}

	// largest ullman on left.
	if nl.Ullman < nr.Ullman {
		nl, nr = nr, nl
	}

	var nt gc.Node
	gc.Tempname(&nt, nl.Type)
	gc.Cgen(nl, &nt)
	var n1 gc.Node
	gc.Regalloc(&n1, t, res)
	gc.Cgen(nr, &n1)
	var n2 gc.Node
	gc.Regalloc(&n2, t, nil)
	gmove(&nt, &n2)
	a := optoas(op, t)
	gins(a, &n2, &n1)
	gc.Regfree(&n2)
	gmove(&n1, res)
	gc.Regfree(&n1)

	return true
}
Esempio n. 7
0
func sudoclean() {
	if clean[cleani-1].Op != gc.OEMPTY {
		gc.Regfree(&clean[cleani-1])
	}
	if clean[cleani-2].Op != gc.OEMPTY {
		gc.Regfree(&clean[cleani-2])
	}
	cleani -= 2
}
Esempio n. 8
0
/*
 * generate high multiply:
 *   res = (nl*nr) >> width
 */
func cgen_hmul(nl *gc.Node, nr *gc.Node, res *gc.Node) {
	// largest ullman on left.
	if nl.Ullman < nr.Ullman {
		nl, nr = nr, nl
	}

	t := nl.Type
	w := t.Width * 8
	var n1 gc.Node
	gc.Cgenr(nl, &n1, res)
	var n2 gc.Node
	gc.Cgenr(nr, &n2, nil)
	switch gc.Simtype[t.Etype] {
	case gc.TINT8,
		gc.TINT16,
		gc.TINT32:
		gins3(optoas(gc.OMUL, t), &n2, &n1, nil)
		var lo gc.Node
		gc.Nodreg(&lo, gc.Types[gc.TUINT64], mips.REG_LO)
		gins(mips.AMOVV, &lo, &n1)
		p := gins(mips.ASRAV, nil, &n1)
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = w

	case gc.TUINT8,
		gc.TUINT16,
		gc.TUINT32:
		gins3(optoas(gc.OMUL, t), &n2, &n1, nil)
		var lo gc.Node
		gc.Nodreg(&lo, gc.Types[gc.TUINT64], mips.REG_LO)
		gins(mips.AMOVV, &lo, &n1)
		p := gins(mips.ASRLV, nil, &n1)
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = w

	case gc.TINT64,
		gc.TUINT64:
		if t.IsSigned() {
			gins3(mips.AMULV, &n2, &n1, nil)
		} else {
			gins3(mips.AMULVU, &n2, &n1, nil)
		}
		var hi gc.Node
		gc.Nodreg(&hi, gc.Types[gc.TUINT64], mips.REG_HI)
		gins(mips.AMOVV, &hi, &n1)

	default:
		gc.Fatalf("cgen_hmul %v", t)
	}

	gc.Cgen(&n1, res)
	gc.Regfree(&n1)
	gc.Regfree(&n2)
}
Esempio n. 9
0
/*
 * generate high multiply
 *  res = (nl * nr) >> wordsize
 */
func cgen_hmul(nl *gc.Node, nr *gc.Node, res *gc.Node) {
	if nl.Ullman < nr.Ullman {
		nl, nr = nr, nl
	}

	t := nl.Type
	w := t.Width * 8
	var n1 gc.Node
	gc.Regalloc(&n1, t, res)
	gc.Cgen(nl, &n1)
	var n2 gc.Node
	gc.Regalloc(&n2, t, nil)
	gc.Cgen(nr, &n2)
	switch gc.Simtype[t.Etype] {
	case gc.TINT8,
		gc.TINT16:
		gins(optoas(gc.OMUL, t), &n2, &n1)
		gshift(arm.AMOVW, &n1, arm.SHIFT_AR, int32(w), &n1)

	case gc.TUINT8,
		gc.TUINT16:
		gins(optoas(gc.OMUL, t), &n2, &n1)
		gshift(arm.AMOVW, &n1, arm.SHIFT_LR, int32(w), &n1)

		// perform a long multiplication.
	case gc.TINT32,
		gc.TUINT32:
		var p *obj.Prog
		if t.IsSigned() {
			p = gins(arm.AMULL, &n2, nil)
		} else {
			p = gins(arm.AMULLU, &n2, nil)
		}

		// n2 * n1 -> (n1 n2)
		p.Reg = n1.Reg

		p.To.Type = obj.TYPE_REGREG
		p.To.Reg = n1.Reg
		p.To.Offset = int64(n2.Reg)

	default:
		gc.Fatalf("cgen_hmul %v", t)
	}

	gc.Cgen(&n1, res)
	gc.Regfree(&n1)
	gc.Regfree(&n2)
}
Esempio n. 10
0
/*
 * generate
 *	as $c, n
 */
func ginscon(as obj.As, c int64, n2 *gc.Node) {
	var n1 gc.Node

	switch as {
	case x86.AADDL,
		x86.AMOVL,
		x86.ALEAL:
		gc.Nodconst(&n1, gc.Types[gc.TINT32], c)

	default:
		gc.Nodconst(&n1, gc.Types[gc.TINT64], c)
	}

	if as != x86.AMOVQ && (c < -(1<<31) || c >= 1<<31) {
		// cannot have 64-bit immediate in ADD, etc.
		// instead, MOV into register first.
		var ntmp gc.Node
		gc.Regalloc(&ntmp, gc.Types[gc.TINT64], nil)

		gins(x86.AMOVQ, &n1, &ntmp)
		gins(as, &ntmp, n2)
		gc.Regfree(&ntmp)
		return
	}

	gins(as, &n1, n2)
}
Esempio n. 11
0
/*
 * generate
 *	as n, $c (CMP/CMPU)
 */
func ginscon2(as obj.As, n2 *gc.Node, c int64) {
	var n1 gc.Node

	gc.Nodconst(&n1, gc.Types[gc.TINT64], c)

	switch as {
	default:
		gc.Fatalf("ginscon2")

	case ppc64.ACMP:
		if -ppc64.BIG <= c && c <= ppc64.BIG {
			rawgins(as, n2, &n1)
			return
		}

	case ppc64.ACMPU:
		if 0 <= c && c <= 2*ppc64.BIG {
			rawgins(as, n2, &n1)
			return
		}
	}

	// MOV n1 into register first
	var ntmp gc.Node
	gc.Regalloc(&ntmp, gc.Types[gc.TINT64], nil)

	rawgins(ppc64.AMOVD, &n1, &ntmp)
	rawgins(as, n2, &ntmp)
	gc.Regfree(&ntmp)
}
Esempio n. 12
0
// RightShiftWithCarry generates a constant unsigned
// right shift with carry.
//
// res = n >> shift // with carry
func RightShiftWithCarry(n *gc.Node, shift uint, res *gc.Node) {
	// Extra 1 is for carry bit.
	maxshift := uint(n.Type.Width*8 + 1)
	if shift == 0 {
		gmove(n, res)
	} else if shift < maxshift {
		// 1. clear rightmost bit of target
		var n1 gc.Node
		gc.Nodconst(&n1, n.Type, 1)
		gins(optoas(gc.ORSH, n.Type), &n1, n)
		gins(optoas(gc.OLSH, n.Type), &n1, n)
		// 2. add carry flag to target
		var n2 gc.Node
		gc.Nodconst(&n1, n.Type, 0)
		gc.Regalloc(&n2, n.Type, nil)
		gins(optoas(gc.OAS, n.Type), &n1, &n2)
		gins(arm64.AADC, &n2, n)
		// 3. right rotate 1 bit
		gc.Nodconst(&n1, n.Type, 1)
		gins(arm64.AROR, &n1, n)

		// ARM64 backend doesn't eliminate shifts by 0. It is manually checked here.
		if shift > 1 {
			var n3 gc.Node
			gc.Nodconst(&n3, n.Type, int64(shift-1))
			cgen_shift(gc.ORSH, true, n, &n3, res)
		} else {
			gmove(n, res)
		}
		gc.Regfree(&n2)
	} else {
		gc.Fatalf("RightShiftWithCarry: shift(%v) is bigger than max size(%v)", shift, maxshift)
	}
}
Esempio n. 13
0
func ginscmp(op gc.Op, t *gc.Type, n1, n2 *gc.Node, likely int) *obj.Prog {
	if t.IsInteger() || t.Etype == gc.Tptr {
		if (n1.Op == gc.OLITERAL || n1.Op == gc.OADDR && n1.Left.Op == gc.ONAME) && n2.Op != gc.OLITERAL {
			// Reverse comparison to place constant (including address constant) last.
			op = gc.Brrev(op)
			n1, n2 = n2, n1
		}
	}

	// General case.
	var r1, r2, g1, g2 gc.Node

	// A special case to make write barriers more efficient.
	// Comparing the first field of a named struct can be done directly.
	base := n1
	if n1.Op == gc.ODOT && n1.Left.Type.IsStruct() && n1.Left.Type.Field(0).Sym == n1.Sym {
		base = n1.Left
	}

	if base.Op == gc.ONAME && base.Class != gc.PAUTOHEAP || n1.Op == gc.OINDREG {
		r1 = *n1
	} else {
		gc.Regalloc(&r1, t, n1)
		gc.Regalloc(&g1, n1.Type, &r1)
		gc.Cgen(n1, &g1)
		gmove(&g1, &r1)
	}
	if n2.Op == gc.OLITERAL && t.IsInteger() || n2.Op == gc.OADDR && n2.Left.Op == gc.ONAME && n2.Left.Class == gc.PEXTERN {
		r2 = *n2
	} else {
		gc.Regalloc(&r2, t, n2)
		gc.Regalloc(&g2, n1.Type, &r2)
		gc.Cgen(n2, &g2)
		gmove(&g2, &r2)
	}
	gins(optoas(gc.OCMP, t), &r1, &r2)
	if r1.Op == gc.OREGISTER {
		gc.Regfree(&g1)
		gc.Regfree(&r1)
	}
	if r2.Op == gc.OREGISTER {
		gc.Regfree(&g2)
		gc.Regfree(&r2)
	}
	return gc.Gbranch(optoas(op, t), nil, likely)
}
Esempio n. 14
0
func restx(x *gc.Node, oldx *gc.Node) {
	if oldx.Op != 0 {
		x.Type = gc.Types[gc.TINT64]
		gc.SetReg(int(x.Reg), int(oldx.Etype))
		gmove(oldx, x)
		gc.Regfree(oldx)
	}
}
Esempio n. 15
0
func restx(x *gc.Node, oldx *gc.Node) {
	gc.Regfree(x)

	if oldx.Op != 0 {
		x.Type = gc.Types[gc.TINT32]
		gmove(oldx, x)
	}
}
Esempio n. 16
0
/*
 * generate high multiply:
 *   res = (nl*nr) >> width
 */
func cgen_hmul(nl *gc.Node, nr *gc.Node, res *gc.Node) {
	// largest ullman on left.
	if nl.Ullman < nr.Ullman {
		nl, nr = nr, nl
	}

	t := nl.Type
	w := t.Width * 8
	var n1 gc.Node
	gc.Cgenr(nl, &n1, res)
	var n2 gc.Node
	gc.Cgenr(nr, &n2, nil)
	switch gc.Simtype[t.Etype] {
	case gc.TINT8,
		gc.TINT16,
		gc.TINT32:
		gins(optoas(gc.OMUL, t), &n2, &n1)
		p := gins(arm64.AASR, nil, &n1)
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = w

	case gc.TUINT8,
		gc.TUINT16,
		gc.TUINT32:
		gins(optoas(gc.OMUL, t), &n2, &n1)
		p := gins(arm64.ALSR, nil, &n1)
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = w

	case gc.TINT64,
		gc.TUINT64:
		if t.IsSigned() {
			gins(arm64.ASMULH, &n2, &n1)
		} else {
			gins(arm64.AUMULH, &n2, &n1)
		}

	default:
		gc.Fatalf("cgen_hmul %v", t)
	}

	gc.Cgen(&n1, res)
	gc.Regfree(&n1)
	gc.Regfree(&n2)
}
Esempio n. 17
0
/*
 * generate
 *	as $c, n
 */
func ginscon(as obj.As, c int64, n *gc.Node) {
	var n1 gc.Node
	gc.Nodconst(&n1, gc.Types[gc.TINT32], c)
	var n2 gc.Node
	gc.Regalloc(&n2, gc.Types[gc.TINT32], nil)
	gmove(&n1, &n2)
	gins(as, &n2, n)
	gc.Regfree(&n2)
}
Esempio n. 18
0
func splitclean() {
	if nsclean <= 0 {
		gc.Fatalf("splitclean")
	}
	nsclean--
	if sclean[nsclean].Op != gc.OEMPTY {
		gc.Regfree(&sclean[nsclean])
	}
}
Esempio n. 19
0
/*
 * generate high multiply:
 *   res = (nl*nr) >> width
 */
func cgen_hmul(nl *gc.Node, nr *gc.Node, res *gc.Node) {
	// largest ullman on left.
	if nl.Ullman < nr.Ullman {
		nl, nr = nr, nl
	}

	t := nl.Type
	w := int(t.Width) * 8
	var n1 gc.Node
	gc.Cgenr(nl, &n1, res)
	var n2 gc.Node
	gc.Cgenr(nr, &n2, nil)
	switch gc.Simtype[t.Etype] {
	case gc.TINT8,
		gc.TINT16,
		gc.TINT32:
		gins(optoas(gc.OMUL, t), &n2, &n1)
		p := gins(s390x.ASRAD, nil, &n1)
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = int64(w)

	case gc.TUINT8,
		gc.TUINT16,
		gc.TUINT32:
		gins(optoas(gc.OMUL, t), &n2, &n1)
		p := gins(s390x.ASRD, nil, &n1)
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = int64(w)

	case gc.TINT64:
		gins(s390x.AMULHD, &n2, &n1)

	case gc.TUINT64:
		gins(s390x.AMULHDU, &n2, &n1)

	default:
		gc.Fatalf("cgen_hmul %v", t)
	}

	gc.Cgen(&n1, res)
	gc.Regfree(&n1)
	gc.Regfree(&n2)
}
Esempio n. 20
0
/*
 * generate byte multiply:
 *	res = nl * nr
 * there is no 2-operand byte multiply instruction so
 * we do a full-width multiplication and truncate afterwards.
 */
func cgen_bmul(op gc.Op, nl *gc.Node, nr *gc.Node, res *gc.Node) bool {
	if optoas(op, nl.Type) != x86.AIMULB {
		return false
	}

	// largest ullman on left.
	if nl.Ullman < nr.Ullman {
		nl, nr = nr, nl
	}

	// generate operands in "8-bit" registers.
	var n1b gc.Node
	gc.Regalloc(&n1b, nl.Type, res)

	gc.Cgen(nl, &n1b)
	var n2b gc.Node
	gc.Regalloc(&n2b, nr.Type, nil)
	gc.Cgen(nr, &n2b)

	// perform full-width multiplication.
	t := gc.Types[gc.TUINT64]

	if nl.Type.IsSigned() {
		t = gc.Types[gc.TINT64]
	}
	var n1 gc.Node
	gc.Nodreg(&n1, t, int(n1b.Reg))
	var n2 gc.Node
	gc.Nodreg(&n2, t, int(n2b.Reg))
	a := optoas(op, t)
	gins(a, &n2, &n1)

	// truncate.
	gmove(&n1, res)

	gc.Regfree(&n1b)
	gc.Regfree(&n2b)
	return true
}
Esempio n. 21
0
// res = runtime.getg()
func getg(res *gc.Node) {
	var n1 gc.Node
	gc.Regalloc(&n1, res.Type, res)
	mov := optoas(gc.OAS, gc.Types[gc.Tptr])
	p := gins(mov, nil, &n1)
	p.From.Type = obj.TYPE_REG
	p.From.Reg = x86.REG_TLS
	p = gins(mov, nil, &n1)
	p.From = p.To
	p.From.Type = obj.TYPE_MEM
	p.From.Index = x86.REG_TLS
	p.From.Scale = 1
	gmove(&n1, res)
	gc.Regfree(&n1)
}
Esempio n. 22
0
/*
 * generate
 *	as $c, n
 */
func ginscon(as obj.As, c int64, n2 *gc.Node) {
	var n1 gc.Node

	gc.Nodconst(&n1, gc.Types[gc.TINT64], c)

	if as != arm64.AMOVD && (c < -arm64.BIG || c > arm64.BIG) || as == arm64.AMUL || n2 != nil && n2.Op != gc.OREGISTER {
		// cannot have more than 16-bit of immediate in ADD, etc.
		// instead, MOV into register first.
		var ntmp gc.Node
		gc.Regalloc(&ntmp, gc.Types[gc.TINT64], nil)

		gins(arm64.AMOVD, &n1, &ntmp)
		gins(as, &ntmp, n2)
		gc.Regfree(&ntmp)
		return
	}

	rawgins(as, &n1, n2)
}
Esempio n. 23
0
/*
 * generate
 *	as $c, n
 */
func ginscon(as obj.As, c int64, n2 *gc.Node) {
	var n1 gc.Node

	gc.Nodconst(&n1, gc.Types[gc.TINT64], c)

	if as != mips.AMOVV && (c < -mips.BIG || c > mips.BIG) || n2.Op != gc.OREGISTER || as == mips.AMUL || as == mips.AMULU || as == mips.AMULV || as == mips.AMULVU {
		// cannot have more than 16-bit of immediate in ADD, etc.
		// instead, MOV into register first.
		var ntmp gc.Node
		gc.Regalloc(&ntmp, gc.Types[gc.TINT64], nil)

		rawgins(mips.AMOVV, &n1, &ntmp)
		rawgins(as, &ntmp, n2)
		gc.Regfree(&ntmp)
		return
	}

	rawgins(as, &n1, n2)
}
Esempio n. 24
0
/*
 * generate high multiply:
 *   res = (nl*nr) >> width
 */
func cgen_hmul(nl *gc.Node, nr *gc.Node, res *gc.Node) {
	var n1 gc.Node
	var n2 gc.Node

	t := nl.Type
	a := optoas(gc.OHMUL, t)

	// gen nl in n1.
	gc.Tempname(&n1, t)
	gc.Cgen(nl, &n1)

	// gen nr in n2.
	gc.Regalloc(&n2, t, res)
	gc.Cgen(nr, &n2)

	var ax, oldax, dx, olddx gc.Node
	savex(x86.REG_AX, &ax, &oldax, res, gc.Types[gc.TUINT32])
	savex(x86.REG_DX, &dx, &olddx, res, gc.Types[gc.TUINT32])

	gmove(&n2, &ax)
	gins(a, &n1, nil)
	gc.Regfree(&n2)

	if t.Width == 1 {
		// byte multiply behaves differently.
		var byteAH, byteDX gc.Node
		gc.Nodreg(&byteAH, t, x86.REG_AH)
		gc.Nodreg(&byteDX, t, x86.REG_DX)
		gmove(&byteAH, &byteDX)
	}

	gmove(&dx, res)

	restx(&ax, &oldax)
	restx(&dx, &olddx)
}
Esempio n. 25
0
// clearfat clears (i.e. replaces with zeros) the value pointed to by nl.
func clearfat(nl *gc.Node) {
	if gc.Debug['g'] != 0 {
		fmt.Printf("clearfat %v (%v, size: %d)\n", nl, nl.Type, nl.Type.Width)
	}

	// Avoid taking the address for simple enough types.
	if gc.Componentgen(nil, nl) {
		return
	}

	var dst gc.Node
	gc.Regalloc(&dst, gc.Types[gc.Tptr], nil)
	gc.Agen(nl, &dst)

	var boff int64
	w := nl.Type.Width
	if w > clearLoopCutoff {
		// Generate a loop clearing 256 bytes per iteration using XCs.
		var end gc.Node
		gc.Regalloc(&end, gc.Types[gc.Tptr], nil)
		p := gins(s390x.AMOVD, &dst, &end)
		p.From.Type = obj.TYPE_ADDR
		p.From.Offset = w - (w % 256)

		p = gins(s390x.AXC, &dst, &dst)
		p.From.Type = obj.TYPE_MEM
		p.From.Offset = 0
		p.To.Type = obj.TYPE_MEM
		p.To.Offset = 0
		p.From3 = new(obj.Addr)
		p.From3.Offset = 256
		p.From3.Type = obj.TYPE_CONST
		pl := p

		ginscon(s390x.AADD, 256, &dst)
		gins(s390x.ACMP, &dst, &end)
		gc.Patch(gc.Gbranch(s390x.ABNE, nil, 0), pl)
		gc.Regfree(&end)
		w = w % 256
	}

	// Generate instructions to clear the remaining memory.
	for w > 0 {
		n := w

		// Can clear at most 256 bytes per instruction.
		if n > 256 {
			n = 256
		}

		switch n {
		// Handle very small clears using moves.
		case 8, 4, 2, 1:
			ins := s390x.AMOVB
			switch n {
			case 8:
				ins = s390x.AMOVD
			case 4:
				ins = s390x.AMOVW
			case 2:
				ins = s390x.AMOVH
			}
			p := gins(ins, nil, &dst)
			p.From.Type = obj.TYPE_CONST
			p.From.Offset = 0
			p.To.Type = obj.TYPE_MEM
			p.To.Offset = boff

		// Handle clears that would require multiple moves with a XC.
		default:
			p := gins(s390x.AXC, &dst, &dst)
			p.From.Type = obj.TYPE_MEM
			p.From.Offset = boff
			p.To.Type = obj.TYPE_MEM
			p.To.Offset = boff
			p.From3 = new(obj.Addr)
			p.From3.Offset = n
			p.From3.Type = obj.TYPE_CONST
		}

		boff += n
		w -= n
	}

	gc.Regfree(&dst)
}
Esempio n. 26
0
/*
 * generate shift according to op, one of:
 *	res = nl << nr
 *	res = nl >> nr
 */
func cgen_shift(op gc.Op, bounded bool, nl *gc.Node, nr *gc.Node, res *gc.Node) {
	a := optoas(op, nl.Type)

	if nr.Op == gc.OLITERAL {
		var n1 gc.Node
		gc.Regalloc(&n1, nl.Type, res)
		gc.Cgen(nl, &n1)
		sc := uint64(nr.Int64())
		if sc >= uint64(nl.Type.Width*8) {
			// large shift gets 2 shifts by width-1
			var n3 gc.Node
			gc.Nodconst(&n3, gc.Types[gc.TUINT32], nl.Type.Width*8-1)

			gins(a, &n3, &n1)
			gins(a, &n3, &n1)
		} else {
			gins(a, nr, &n1)
		}
		gmove(&n1, res)
		gc.Regfree(&n1)
		return
	}

	if nl.Ullman >= gc.UINF {
		var n4 gc.Node
		gc.Tempname(&n4, nl.Type)
		gc.Cgen(nl, &n4)
		nl = &n4
	}

	if nr.Ullman >= gc.UINF {
		var n5 gc.Node
		gc.Tempname(&n5, nr.Type)
		gc.Cgen(nr, &n5)
		nr = &n5
	}

	// Allow either uint32 or uint64 as shift type,
	// to avoid unnecessary conversion from uint32 to uint64
	// just to do the comparison.
	tcount := gc.Types[gc.Simtype[nr.Type.Etype]]

	if tcount.Etype < gc.TUINT32 {
		tcount = gc.Types[gc.TUINT32]
	}

	var n1 gc.Node
	gc.Regalloc(&n1, nr.Type, nil) // to hold the shift type in CX
	var n3 gc.Node
	gc.Regalloc(&n3, tcount, &n1) // to clear high bits of CX

	var n2 gc.Node
	gc.Regalloc(&n2, nl.Type, res)

	if nl.Ullman >= nr.Ullman {
		gc.Cgen(nl, &n2)
		gc.Cgen(nr, &n1)
		gmove(&n1, &n3)
	} else {
		gc.Cgen(nr, &n1)
		gmove(&n1, &n3)
		gc.Cgen(nl, &n2)
	}

	gc.Regfree(&n3)

	// test and fix up large shifts
	if !bounded {
		gc.Nodconst(&n3, tcount, nl.Type.Width*8)
		gins(optoas(gc.OCMP, tcount), &n1, &n3)
		p1 := gc.Gbranch(optoas(gc.OLT, tcount), nil, 1)
		if op == gc.ORSH && nl.Type.IsSigned() {
			gc.Nodconst(&n3, gc.Types[gc.TUINT32], nl.Type.Width*8-1)
			gins(a, &n3, &n2)
		} else {
			gc.Nodconst(&n3, nl.Type, 0)
			gmove(&n3, &n2)
		}

		gc.Patch(p1, gc.Pc)
	}

	gins(a, &n1, &n2)

	gmove(&n2, res)

	gc.Regfree(&n1)
	gc.Regfree(&n2)
}
Esempio n. 27
0
/*
 * generate comparison of nl, nr, both 64-bit.
 * nl is memory; nr is constant or memory.
 */
func cmp64(nl *gc.Node, nr *gc.Node, op gc.Op, likely int, to *obj.Prog) {
	var lo1 gc.Node
	var hi1 gc.Node
	var lo2 gc.Node
	var hi2 gc.Node
	var rr gc.Node

	split64(nl, &lo1, &hi1)
	split64(nr, &lo2, &hi2)

	// compare most significant word;
	// if they differ, we're done.
	t := hi1.Type

	if nl.Op == gc.OLITERAL || nr.Op == gc.OLITERAL {
		gins(x86.ACMPL, &hi1, &hi2)
	} else {
		gc.Regalloc(&rr, gc.Types[gc.TINT32], nil)
		gins(x86.AMOVL, &hi1, &rr)
		gins(x86.ACMPL, &rr, &hi2)
		gc.Regfree(&rr)
	}

	var br *obj.Prog
	switch op {
	default:
		gc.Fatalf("cmp64 %v %v", op, t)

		// cmp hi
	// jne L
	// cmp lo
	// jeq to
	// L:
	case gc.OEQ:
		br = gc.Gbranch(x86.AJNE, nil, -likely)

		// cmp hi
	// jne to
	// cmp lo
	// jne to
	case gc.ONE:
		gc.Patch(gc.Gbranch(x86.AJNE, nil, likely), to)

		// cmp hi
	// jgt to
	// jlt L
	// cmp lo
	// jge to (or jgt to)
	// L:
	case gc.OGE,
		gc.OGT:
		gc.Patch(gc.Gbranch(optoas(gc.OGT, t), nil, likely), to)

		br = gc.Gbranch(optoas(gc.OLT, t), nil, -likely)

		// cmp hi
	// jlt to
	// jgt L
	// cmp lo
	// jle to (or jlt to)
	// L:
	case gc.OLE,
		gc.OLT:
		gc.Patch(gc.Gbranch(optoas(gc.OLT, t), nil, likely), to)

		br = gc.Gbranch(optoas(gc.OGT, t), nil, -likely)
	}

	// compare least significant word
	t = lo1.Type

	if nl.Op == gc.OLITERAL || nr.Op == gc.OLITERAL {
		gins(x86.ACMPL, &lo1, &lo2)
	} else {
		gc.Regalloc(&rr, gc.Types[gc.TINT32], nil)
		gins(x86.AMOVL, &lo1, &rr)
		gins(x86.ACMPL, &rr, &lo2)
		gc.Regfree(&rr)
	}

	// jump again
	gc.Patch(gc.Gbranch(optoas(op, t), nil, likely), to)

	// point first branch down here if appropriate
	if br != nil {
		gc.Patch(br, gc.Pc)
	}

	splitclean()
	splitclean()
}
Esempio n. 28
0
/*
 * generate division.
 * generates one of:
 *	res = nl / nr
 *	res = nl % nr
 * according to op.
 */
func dodiv(op gc.Op, nl *gc.Node, nr *gc.Node, res *gc.Node) {
	// Have to be careful about handling
	// most negative int divided by -1 correctly.
	// The hardware will generate undefined result.
	// Also need to explicitly trap on division on zero,
	// the hardware will silently generate undefined result.
	// DIVW will leave unpredicable result in higher 32-bit,
	// so always use DIVD/DIVDU.
	t := nl.Type

	t0 := t
	check := 0
	if t.IsSigned() {
		check = 1
		if gc.Isconst(nl, gc.CTINT) && nl.Int64() != -(1<<uint64(t.Width*8-1)) {
			check = 0
		} else if gc.Isconst(nr, gc.CTINT) && nr.Int64() != -1 {
			check = 0
		}
	}

	if t.Width < 8 {
		if t.IsSigned() {
			t = gc.Types[gc.TINT64]
		} else {
			t = gc.Types[gc.TUINT64]
		}
		check = 0
	}

	a := optoas(gc.ODIV, t)

	var tl gc.Node
	gc.Regalloc(&tl, t0, nil)
	var tr gc.Node
	gc.Regalloc(&tr, t0, nil)
	if nl.Ullman >= nr.Ullman {
		gc.Cgen(nl, &tl)
		gc.Cgen(nr, &tr)
	} else {
		gc.Cgen(nr, &tr)
		gc.Cgen(nl, &tl)
	}

	if t != t0 {
		// Convert
		tl2 := tl

		tr2 := tr
		tl.Type = t
		tr.Type = t
		gmove(&tl2, &tl)
		gmove(&tr2, &tr)
	}

	// Handle divide-by-zero panic.
	p1 := gins(optoas(gc.OCMP, t), &tr, nil)

	p1.To.Type = obj.TYPE_REG
	p1.To.Reg = s390x.REGZERO
	p1 = gc.Gbranch(optoas(gc.ONE, t), nil, +1)
	if panicdiv == nil {
		panicdiv = gc.Sysfunc("panicdivide")
	}
	gc.Ginscall(panicdiv, -1)
	gc.Patch(p1, gc.Pc)

	var p2 *obj.Prog
	if check != 0 {
		var nm1 gc.Node
		gc.Nodconst(&nm1, t, -1)
		gins(optoas(gc.OCMP, t), &tr, &nm1)
		p1 := gc.Gbranch(optoas(gc.ONE, t), nil, +1)
		if op == gc.ODIV {
			// a / (-1) is -a.
			gins(optoas(gc.OMINUS, t), nil, &tl)

			gmove(&tl, res)
		} else {
			// a % (-1) is 0.
			var nz gc.Node
			gc.Nodconst(&nz, t, 0)

			gmove(&nz, res)
		}

		p2 = gc.Gbranch(obj.AJMP, nil, 0)
		gc.Patch(p1, gc.Pc)
	}

	p1 = gins(a, &tr, &tl)
	if op == gc.ODIV {
		gc.Regfree(&tr)
		gmove(&tl, res)
	} else {
		// A%B = A-(A/B*B)
		var tm gc.Node
		gc.Regalloc(&tm, t, nil)

		// patch div to use the 3 register form
		// TODO(minux): add gins3?
		p1.Reg = p1.To.Reg

		p1.To.Reg = tm.Reg
		gins(optoas(gc.OMUL, t), &tr, &tm)
		gc.Regfree(&tr)
		gins(optoas(gc.OSUB, t), &tm, &tl)
		gc.Regfree(&tm)
		gmove(&tl, res)
	}

	gc.Regfree(&tl)
	if check != 0 {
		gc.Patch(p2, gc.Pc)
	}
}
Esempio n. 29
0
// blockcopy copies w bytes from &n to &res
func blockcopy(n, res *gc.Node, osrc, odst, w int64) {
	var dst gc.Node
	var src gc.Node
	if n.Ullman >= res.Ullman {
		gc.Agenr(n, &dst, res) // temporarily use dst
		gc.Regalloc(&src, gc.Types[gc.Tptr], nil)
		gins(s390x.AMOVD, &dst, &src)
		if res.Op == gc.ONAME {
			gc.Gvardef(res)
		}
		gc.Agen(res, &dst)
	} else {
		if res.Op == gc.ONAME {
			gc.Gvardef(res)
		}
		gc.Agenr(res, &dst, res)
		gc.Agenr(n, &src, nil)
	}
	defer gc.Regfree(&src)
	defer gc.Regfree(&dst)

	var tmp gc.Node
	gc.Regalloc(&tmp, gc.Types[gc.Tptr], nil)
	defer gc.Regfree(&tmp)

	offset := int64(0)
	dir := _FORWARDS
	if osrc < odst && odst < osrc+w {
		// Reverse. Can't use MVC, fall back onto basic moves.
		dir = _BACKWARDS
		const copiesPerIter = 2
		if w >= 8*copiesPerIter {
			cnt := w - (w % (8 * copiesPerIter))
			ginscon(s390x.AADD, w, &src)
			ginscon(s390x.AADD, w, &dst)

			var end gc.Node
			gc.Regalloc(&end, gc.Types[gc.Tptr], nil)
			p := gins(s390x.ASUB, nil, &end)
			p.From.Type = obj.TYPE_CONST
			p.From.Offset = cnt
			p.Reg = src.Reg

			var label *obj.Prog
			for i := 0; i < copiesPerIter; i++ {
				offset := int64(-8 * (i + 1))
				p := gins(s390x.AMOVD, &src, &tmp)
				p.From.Type = obj.TYPE_MEM
				p.From.Offset = offset
				if i == 0 {
					label = p
				}
				p = gins(s390x.AMOVD, &tmp, &dst)
				p.To.Type = obj.TYPE_MEM
				p.To.Offset = offset
			}

			ginscon(s390x.ASUB, 8*copiesPerIter, &src)
			ginscon(s390x.ASUB, 8*copiesPerIter, &dst)
			gins(s390x.ACMP, &src, &end)
			gc.Patch(gc.Gbranch(s390x.ABNE, nil, 0), label)
			gc.Regfree(&end)

			w -= cnt
		} else {
			offset = w
		}
	}

	if dir == _FORWARDS && w > 1024 {
		// Loop over MVCs
		cnt := w - (w % 256)

		var end gc.Node
		gc.Regalloc(&end, gc.Types[gc.Tptr], nil)
		add := gins(s390x.AADD, nil, &end)
		add.From.Type = obj.TYPE_CONST
		add.From.Offset = cnt
		add.Reg = src.Reg

		mvc := gins(s390x.AMVC, &src, &dst)
		mvc.From.Type = obj.TYPE_MEM
		mvc.From.Offset = 0
		mvc.To.Type = obj.TYPE_MEM
		mvc.To.Offset = 0
		mvc.From3 = new(obj.Addr)
		mvc.From3.Type = obj.TYPE_CONST
		mvc.From3.Offset = 256

		ginscon(s390x.AADD, 256, &src)
		ginscon(s390x.AADD, 256, &dst)
		gins(s390x.ACMP, &src, &end)
		gc.Patch(gc.Gbranch(s390x.ABNE, nil, 0), mvc)
		gc.Regfree(&end)

		w -= cnt
	}

	for w > 0 {
		cnt := w
		// If in reverse we can only do 8, 4, 2 or 1 bytes at a time.
		if dir == _BACKWARDS {
			switch {
			case cnt >= 8:
				cnt = 8
			case cnt >= 4:
				cnt = 4
			case cnt >= 2:
				cnt = 2
			}
		} else if cnt > 256 {
			cnt = 256
		}

		switch cnt {
		case 8, 4, 2, 1:
			op := s390x.AMOVB
			switch cnt {
			case 8:
				op = s390x.AMOVD
			case 4:
				op = s390x.AMOVW
			case 2:
				op = s390x.AMOVH
			}
			load := gins(op, &src, &tmp)
			load.From.Type = obj.TYPE_MEM
			load.From.Offset = offset

			store := gins(op, &tmp, &dst)
			store.To.Type = obj.TYPE_MEM
			store.To.Offset = offset

			if dir == _BACKWARDS {
				load.From.Offset -= cnt
				store.To.Offset -= cnt
			}

		default:
			p := gins(s390x.AMVC, &src, &dst)
			p.From.Type = obj.TYPE_MEM
			p.From.Offset = offset
			p.To.Type = obj.TYPE_MEM
			p.To.Offset = offset
			p.From3 = new(obj.Addr)
			p.From3.Type = obj.TYPE_CONST
			p.From3.Offset = cnt
		}

		switch dir {
		case _FORWARDS:
			offset += cnt
		case _BACKWARDS:
			offset -= cnt
		}
		w -= cnt
	}
}
Esempio n. 30
0
func gmove(f *gc.Node, t *gc.Node) {
	if gc.Debug['M'] != 0 {
		fmt.Printf("gmove %v -> %v\n", f, t)
	}

	ft := gc.Simsimtype(f.Type)
	tt := gc.Simsimtype(t.Type)
	cvt := t.Type

	if gc.Iscomplex[ft] || gc.Iscomplex[tt] {
		gc.Complexmove(f, t)
		return
	}

	// cannot have two memory operands;
	// except 64-bit, which always copies via registers anyway.
	var a obj.As
	var r1 gc.Node
	if !gc.Is64(f.Type) && !gc.Is64(t.Type) && gc.Ismem(f) && gc.Ismem(t) {
		goto hard
	}

	// convert constant to desired type
	if f.Op == gc.OLITERAL {
		var con gc.Node
		switch tt {
		default:
			f.Convconst(&con, t.Type)

		case gc.TINT16,
			gc.TINT8:
			var con gc.Node
			f.Convconst(&con, gc.Types[gc.TINT32])
			var r1 gc.Node
			gc.Regalloc(&r1, con.Type, t)
			gins(arm.AMOVW, &con, &r1)
			gmove(&r1, t)
			gc.Regfree(&r1)
			return

		case gc.TUINT16,
			gc.TUINT8:
			var con gc.Node
			f.Convconst(&con, gc.Types[gc.TUINT32])
			var r1 gc.Node
			gc.Regalloc(&r1, con.Type, t)
			gins(arm.AMOVW, &con, &r1)
			gmove(&r1, t)
			gc.Regfree(&r1)
			return
		}

		f = &con
		ft = gc.Simsimtype(con.Type)

		// constants can't move directly to memory
		if gc.Ismem(t) && !gc.Is64(t.Type) {
			goto hard
		}
	}

	// value -> value copy, only one memory operand.
	// figure out the instruction to use.
	// break out of switch for one-instruction gins.
	// goto rdst for "destination must be register".
	// goto hard for "convert to cvt type first".
	// otherwise handle and return.

	switch uint32(ft)<<16 | uint32(tt) {
	default:
		// should not happen
		gc.Fatalf("gmove %v -> %v", f, t)
		return

		/*
		 * integer copy and truncate
		 */
	case gc.TINT8<<16 | gc.TINT8: // same size
		if !gc.Ismem(f) {
			a = arm.AMOVB
			break
		}
		fallthrough

	case gc.TUINT8<<16 | gc.TINT8,
		gc.TINT16<<16 | gc.TINT8, // truncate
		gc.TUINT16<<16 | gc.TINT8,
		gc.TINT32<<16 | gc.TINT8,
		gc.TUINT32<<16 | gc.TINT8:
		a = arm.AMOVBS

	case gc.TUINT8<<16 | gc.TUINT8:
		if !gc.Ismem(f) {
			a = arm.AMOVB
			break
		}
		fallthrough

	case gc.TINT8<<16 | gc.TUINT8,
		gc.TINT16<<16 | gc.TUINT8,
		gc.TUINT16<<16 | gc.TUINT8,
		gc.TINT32<<16 | gc.TUINT8,
		gc.TUINT32<<16 | gc.TUINT8:
		a = arm.AMOVBU

	case gc.TINT64<<16 | gc.TINT8, // truncate low word
		gc.TUINT64<<16 | gc.TINT8:
		a = arm.AMOVBS

		goto trunc64

	case gc.TINT64<<16 | gc.TUINT8,
		gc.TUINT64<<16 | gc.TUINT8:
		a = arm.AMOVBU
		goto trunc64

	case gc.TINT16<<16 | gc.TINT16: // same size
		if !gc.Ismem(f) {
			a = arm.AMOVH
			break
		}
		fallthrough

	case gc.TUINT16<<16 | gc.TINT16,
		gc.TINT32<<16 | gc.TINT16, // truncate
		gc.TUINT32<<16 | gc.TINT16:
		a = arm.AMOVHS

	case gc.TUINT16<<16 | gc.TUINT16:
		if !gc.Ismem(f) {
			a = arm.AMOVH
			break
		}
		fallthrough

	case gc.TINT16<<16 | gc.TUINT16,
		gc.TINT32<<16 | gc.TUINT16,
		gc.TUINT32<<16 | gc.TUINT16:
		a = arm.AMOVHU

	case gc.TINT64<<16 | gc.TINT16, // truncate low word
		gc.TUINT64<<16 | gc.TINT16:
		a = arm.AMOVHS

		goto trunc64

	case gc.TINT64<<16 | gc.TUINT16,
		gc.TUINT64<<16 | gc.TUINT16:
		a = arm.AMOVHU
		goto trunc64

	case gc.TINT32<<16 | gc.TINT32, // same size
		gc.TINT32<<16 | gc.TUINT32,
		gc.TUINT32<<16 | gc.TINT32,
		gc.TUINT32<<16 | gc.TUINT32:
		a = arm.AMOVW

	case gc.TINT64<<16 | gc.TINT32, // truncate
		gc.TUINT64<<16 | gc.TINT32,
		gc.TINT64<<16 | gc.TUINT32,
		gc.TUINT64<<16 | gc.TUINT32:
		var flo gc.Node
		var fhi gc.Node
		split64(f, &flo, &fhi)

		var r1 gc.Node
		gc.Regalloc(&r1, t.Type, nil)
		gins(arm.AMOVW, &flo, &r1)
		gins(arm.AMOVW, &r1, t)
		gc.Regfree(&r1)
		splitclean()
		return

	case gc.TINT64<<16 | gc.TINT64, // same size
		gc.TINT64<<16 | gc.TUINT64,
		gc.TUINT64<<16 | gc.TINT64,
		gc.TUINT64<<16 | gc.TUINT64:
		var fhi gc.Node
		var flo gc.Node
		split64(f, &flo, &fhi)

		var tlo gc.Node
		var thi gc.Node
		split64(t, &tlo, &thi)
		var r1 gc.Node
		gc.Regalloc(&r1, flo.Type, nil)
		var r2 gc.Node
		gc.Regalloc(&r2, fhi.Type, nil)
		gins(arm.AMOVW, &flo, &r1)
		gins(arm.AMOVW, &fhi, &r2)
		gins(arm.AMOVW, &r1, &tlo)
		gins(arm.AMOVW, &r2, &thi)
		gc.Regfree(&r1)
		gc.Regfree(&r2)
		splitclean()
		splitclean()
		return

		/*
		 * integer up-conversions
		 */
	case gc.TINT8<<16 | gc.TINT16, // sign extend int8
		gc.TINT8<<16 | gc.TUINT16,
		gc.TINT8<<16 | gc.TINT32,
		gc.TINT8<<16 | gc.TUINT32:
		a = arm.AMOVBS

		goto rdst

	case gc.TINT8<<16 | gc.TINT64, // convert via int32
		gc.TINT8<<16 | gc.TUINT64:
		cvt = gc.Types[gc.TINT32]

		goto hard

	case gc.TUINT8<<16 | gc.TINT16, // zero extend uint8
		gc.TUINT8<<16 | gc.TUINT16,
		gc.TUINT8<<16 | gc.TINT32,
		gc.TUINT8<<16 | gc.TUINT32:
		a = arm.AMOVBU

		goto rdst

	case gc.TUINT8<<16 | gc.TINT64, // convert via uint32
		gc.TUINT8<<16 | gc.TUINT64:
		cvt = gc.Types[gc.TUINT32]

		goto hard

	case gc.TINT16<<16 | gc.TINT32, // sign extend int16
		gc.TINT16<<16 | gc.TUINT32:
		a = arm.AMOVHS

		goto rdst

	case gc.TINT16<<16 | gc.TINT64, // convert via int32
		gc.TINT16<<16 | gc.TUINT64:
		cvt = gc.Types[gc.TINT32]

		goto hard

	case gc.TUINT16<<16 | gc.TINT32, // zero extend uint16
		gc.TUINT16<<16 | gc.TUINT32:
		a = arm.AMOVHU

		goto rdst

	case gc.TUINT16<<16 | gc.TINT64, // convert via uint32
		gc.TUINT16<<16 | gc.TUINT64:
		cvt = gc.Types[gc.TUINT32]

		goto hard

	case gc.TINT32<<16 | gc.TINT64, // sign extend int32
		gc.TINT32<<16 | gc.TUINT64:
		var tlo gc.Node
		var thi gc.Node
		split64(t, &tlo, &thi)

		var r1 gc.Node
		gc.Regalloc(&r1, tlo.Type, nil)
		var r2 gc.Node
		gc.Regalloc(&r2, thi.Type, nil)
		gmove(f, &r1)
		p1 := gins(arm.AMOVW, &r1, &r2)
		p1.From.Type = obj.TYPE_SHIFT
		p1.From.Offset = 2<<5 | 31<<7 | int64(r1.Reg)&15 // r1->31
		p1.From.Reg = 0

		//print("gmove: %v\n", p1);
		gins(arm.AMOVW, &r1, &tlo)

		gins(arm.AMOVW, &r2, &thi)
		gc.Regfree(&r1)
		gc.Regfree(&r2)
		splitclean()
		return

	case gc.TUINT32<<16 | gc.TINT64, // zero extend uint32
		gc.TUINT32<<16 | gc.TUINT64:
		var thi gc.Node
		var tlo gc.Node
		split64(t, &tlo, &thi)

		gmove(f, &tlo)
		var r1 gc.Node
		gc.Regalloc(&r1, thi.Type, nil)
		gins(arm.AMOVW, ncon(0), &r1)
		gins(arm.AMOVW, &r1, &thi)
		gc.Regfree(&r1)
		splitclean()
		return

		//	case CASE(TFLOAT64, TUINT64):
	/*
	* float to integer
	 */
	case gc.TFLOAT32<<16 | gc.TINT8,
		gc.TFLOAT32<<16 | gc.TUINT8,
		gc.TFLOAT32<<16 | gc.TINT16,
		gc.TFLOAT32<<16 | gc.TUINT16,
		gc.TFLOAT32<<16 | gc.TINT32,
		gc.TFLOAT32<<16 | gc.TUINT32,

		//	case CASE(TFLOAT32, TUINT64):

		gc.TFLOAT64<<16 | gc.TINT8,
		gc.TFLOAT64<<16 | gc.TUINT8,
		gc.TFLOAT64<<16 | gc.TINT16,
		gc.TFLOAT64<<16 | gc.TUINT16,
		gc.TFLOAT64<<16 | gc.TINT32,
		gc.TFLOAT64<<16 | gc.TUINT32:
		fa := arm.AMOVF

		a := arm.AMOVFW
		if ft == gc.TFLOAT64 {
			fa = arm.AMOVD
			a = arm.AMOVDW
		}

		ta := arm.AMOVW
		switch tt {
		case gc.TINT8:
			ta = arm.AMOVBS

		case gc.TUINT8:
			ta = arm.AMOVBU

		case gc.TINT16:
			ta = arm.AMOVHS

		case gc.TUINT16:
			ta = arm.AMOVHU
		}

		var r1 gc.Node
		gc.Regalloc(&r1, gc.Types[ft], f)
		var r2 gc.Node
		gc.Regalloc(&r2, gc.Types[tt], t)
		gins(fa, f, &r1)        // load to fpu
		p1 := gins(a, &r1, &r1) // convert to w
		switch tt {
		case gc.TUINT8,
			gc.TUINT16,
			gc.TUINT32:
			p1.Scond |= arm.C_UBIT
		}

		gins(arm.AMOVW, &r1, &r2) // copy to cpu
		gins(ta, &r2, t)          // store
		gc.Regfree(&r1)
		gc.Regfree(&r2)
		return

		/*
		 * integer to float
		 */
	case gc.TINT8<<16 | gc.TFLOAT32,
		gc.TUINT8<<16 | gc.TFLOAT32,
		gc.TINT16<<16 | gc.TFLOAT32,
		gc.TUINT16<<16 | gc.TFLOAT32,
		gc.TINT32<<16 | gc.TFLOAT32,
		gc.TUINT32<<16 | gc.TFLOAT32,
		gc.TINT8<<16 | gc.TFLOAT64,
		gc.TUINT8<<16 | gc.TFLOAT64,
		gc.TINT16<<16 | gc.TFLOAT64,
		gc.TUINT16<<16 | gc.TFLOAT64,
		gc.TINT32<<16 | gc.TFLOAT64,
		gc.TUINT32<<16 | gc.TFLOAT64:
		fa := arm.AMOVW

		switch ft {
		case gc.TINT8:
			fa = arm.AMOVBS

		case gc.TUINT8:
			fa = arm.AMOVBU

		case gc.TINT16:
			fa = arm.AMOVHS

		case gc.TUINT16:
			fa = arm.AMOVHU
		}

		a := arm.AMOVWF
		ta := arm.AMOVF
		if tt == gc.TFLOAT64 {
			a = arm.AMOVWD
			ta = arm.AMOVD
		}

		var r1 gc.Node
		gc.Regalloc(&r1, gc.Types[ft], f)
		var r2 gc.Node
		gc.Regalloc(&r2, gc.Types[tt], t)
		gins(fa, f, &r1)          // load to cpu
		gins(arm.AMOVW, &r1, &r2) // copy to fpu
		p1 := gins(a, &r2, &r2)   // convert
		switch ft {
		case gc.TUINT8,
			gc.TUINT16,
			gc.TUINT32:
			p1.Scond |= arm.C_UBIT
		}

		gins(ta, &r2, t) // store
		gc.Regfree(&r1)
		gc.Regfree(&r2)
		return

	case gc.TUINT64<<16 | gc.TFLOAT32,
		gc.TUINT64<<16 | gc.TFLOAT64:
		gc.Fatalf("gmove UINT64, TFLOAT not implemented")
		return

		/*
		 * float to float
		 */
	case gc.TFLOAT32<<16 | gc.TFLOAT32:
		a = arm.AMOVF

	case gc.TFLOAT64<<16 | gc.TFLOAT64:
		a = arm.AMOVD

	case gc.TFLOAT32<<16 | gc.TFLOAT64:
		var r1 gc.Node
		gc.Regalloc(&r1, gc.Types[gc.TFLOAT64], t)
		gins(arm.AMOVF, f, &r1)
		gins(arm.AMOVFD, &r1, &r1)
		gins(arm.AMOVD, &r1, t)
		gc.Regfree(&r1)
		return

	case gc.TFLOAT64<<16 | gc.TFLOAT32:
		var r1 gc.Node
		gc.Regalloc(&r1, gc.Types[gc.TFLOAT64], t)
		gins(arm.AMOVD, f, &r1)
		gins(arm.AMOVDF, &r1, &r1)
		gins(arm.AMOVF, &r1, t)
		gc.Regfree(&r1)
		return
	}

	gins(a, f, t)
	return

	// TODO(kaib): we almost always require a register dest anyway, this can probably be
	// removed.
	// requires register destination
rdst:
	{
		gc.Regalloc(&r1, t.Type, t)

		gins(a, f, &r1)
		gmove(&r1, t)
		gc.Regfree(&r1)
		return
	}

	// requires register intermediate
hard:
	gc.Regalloc(&r1, cvt, t)

	gmove(f, &r1)
	gmove(&r1, t)
	gc.Regfree(&r1)
	return

	// truncate 64 bit integer
trunc64:
	var fhi gc.Node
	var flo gc.Node
	split64(f, &flo, &fhi)

	gc.Regalloc(&r1, t.Type, nil)
	gins(a, &flo, &r1)
	gins(a, &r1, t)
	gc.Regfree(&r1)
	splitclean()
	return
}