func ssaGenValue(s *gc.SSAGenState, v *ssa.Value) {
s.SetLineno(v.Line)
if gc.Thearch.Use387 {
if ssaGenValue387(s, v) {
return // v was handled by 387 generation.
}
}
switch v.Op {
case ssa.Op386ADDL:
r := gc.SSARegNum(v)
r1 := gc.SSARegNum(v.Args[0])
r2 := gc.SSARegNum(v.Args[1])
switch {
case r == r1:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = r2
p.To.Type = obj.TYPE_REG
p.To.Reg = r
case r == r2:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = r1
p.To.Type = obj.TYPE_REG
p.To.Reg = r
default:
p := gc.Prog(x86.ALEAL)
p.From.Type = obj.TYPE_MEM
p.From.Reg = r1
p.From.Scale = 1
p.From.Index = r2
p.To.Type = obj.TYPE_REG
p.To.Reg = r
}
// 2-address opcode arithmetic
case ssa.Op386SUBL,
ssa.Op386MULL,
ssa.Op386ANDL,
ssa.Op386ORL,
ssa.Op386XORL,
ssa.Op386SHLL,
ssa.Op386SHRL, ssa.Op386SHRW, ssa.Op386SHRB,
ssa.Op386SARL, ssa.Op386SARW, ssa.Op386SARB,
ssa.Op386ADDSS, ssa.Op386ADDSD, ssa.Op386SUBSS, ssa.Op386SUBSD,
ssa.Op386MULSS, ssa.Op386MULSD, ssa.Op386DIVSS, ssa.Op386DIVSD,
ssa.Op386PXOR,
ssa.Op386ADCL,
ssa.Op386SBBL:
r := gc.SSARegNum(v)
if r != gc.SSARegNum(v.Args[0]) {
v.Fatalf("input[0] and output not in same register %s", v.LongString())
}
opregreg(v.Op.Asm(), r, gc.SSARegNum(v.Args[1]))
case ssa.Op386ADDLcarry, ssa.Op386SUBLcarry:
// output 0 is carry/borrow, output 1 is the low 32 bits.
r := gc.SSARegNum1(v)
if r != gc.SSARegNum(v.Args[0]) {
v.Fatalf("input[0] and output[1] not in same register %s", v.LongString())
}
opregreg(v.Op.Asm(), r, gc.SSARegNum(v.Args[1]))
case ssa.Op386ADDLconstcarry, ssa.Op386SUBLconstcarry:
// output 0 is carry/borrow, output 1 is the low 32 bits.
r := gc.SSARegNum1(v)
if r != gc.SSARegNum(v.Args[0]) {
v.Fatalf("input[0] and output[1] not in same register %s", v.LongString())
}
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_CONST
p.From.Offset = v.AuxInt
p.To.Type = obj.TYPE_REG
p.To.Reg = r
case ssa.Op386DIVL, ssa.Op386DIVW,
ssa.Op386DIVLU, ssa.Op386DIVWU,
ssa.Op386MODL, ssa.Op386MODW,
ssa.Op386MODLU, ssa.Op386MODWU:
// Arg[0] is already in AX as it's the only register we allow
// and AX is the only output
x := gc.SSARegNum(v.Args[1])
// CPU faults upon signed overflow, which occurs when most
// negative int is divided by -1.
var j *obj.Prog
if v.Op == ssa.Op386DIVL || v.Op == ssa.Op386DIVW ||
v.Op == ssa.Op386MODL || v.Op == ssa.Op386MODW {
var c *obj.Prog
switch v.Op {
case ssa.Op386DIVL, ssa.Op386MODL:
c = gc.Prog(x86.ACMPL)
j = gc.Prog(x86.AJEQ)
gc.Prog(x86.ACDQ) //TODO: fix
case ssa.Op386DIVW, ssa.Op386MODW:
c = gc.Prog(x86.ACMPW)
j = gc.Prog(x86.AJEQ)
gc.Prog(x86.ACWD)
}
c.From.Type = obj.TYPE_REG
c.From.Reg = x
c.To.Type = obj.TYPE_CONST
c.To.Offset = -1
j.To.Type = obj.TYPE_BRANCH
}
// for unsigned ints, we sign extend by setting DX = 0
// signed ints were sign extended above
if v.Op == ssa.Op386DIVLU || v.Op == ssa.Op386MODLU ||
v.Op == ssa.Op386DIVWU || v.Op == ssa.Op386MODWU {
c := gc.Prog(x86.AXORL)
c.From.Type = obj.TYPE_REG
c.From.Reg = x86.REG_DX
c.To.Type = obj.TYPE_REG
c.To.Reg = x86.REG_DX
}
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = x
// signed division, rest of the check for -1 case
if j != nil {
j2 := gc.Prog(obj.AJMP)
j2.To.Type = obj.TYPE_BRANCH
var n *obj.Prog
if v.Op == ssa.Op386DIVL || v.Op == ssa.Op386DIVW {
// n * -1 = -n
n = gc.Prog(x86.ANEGL)
n.To.Type = obj.TYPE_REG
n.To.Reg = x86.REG_AX
} else {
// n % -1 == 0
n = gc.Prog(x86.AXORL)
n.From.Type = obj.TYPE_REG
n.From.Reg = x86.REG_DX
n.To.Type = obj.TYPE_REG
n.To.Reg = x86.REG_DX
}
j.To.Val = n
j2.To.Val = s.Pc()
}
case ssa.Op386HMULL, ssa.Op386HMULW, ssa.Op386HMULB,
ssa.Op386HMULLU, ssa.Op386HMULWU, ssa.Op386HMULBU:
// the frontend rewrites constant division by 8/16/32 bit integers into
// HMUL by a constant
// SSA rewrites generate the 64 bit versions
// Arg[0] is already in AX as it's the only register we allow
// and DX is the only output we care about (the high bits)
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[1])
// IMULB puts the high portion in AH instead of DL,
// so move it to DL for consistency
if v.Type.Size() == 1 {
m := gc.Prog(x86.AMOVB)
m.From.Type = obj.TYPE_REG
m.From.Reg = x86.REG_AH
m.To.Type = obj.TYPE_REG
m.To.Reg = x86.REG_DX
}
case ssa.Op386MULLQU:
// AX * args[1], high 32 bits in DX (result[0]), low 32 bits in AX (result[1]).
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[1])
case ssa.Op386ADDLconst:
r := gc.SSARegNum(v)
a := gc.SSARegNum(v.Args[0])
if r == a {
if v.AuxInt == 1 {
p := gc.Prog(x86.AINCL)
p.To.Type = obj.TYPE_REG
p.To.Reg = r
return
}
if v.AuxInt == -1 {
p := gc.Prog(x86.ADECL)
p.To.Type = obj.TYPE_REG
p.To.Reg = r
return
}
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_CONST
p.From.Offset = v.AuxInt
p.To.Type = obj.TYPE_REG
p.To.Reg = r
return
}
p := gc.Prog(x86.ALEAL)
p.From.Type = obj.TYPE_MEM
p.From.Reg = a
p.From.Offset = v.AuxInt
p.To.Type = obj.TYPE_REG
p.To.Reg = r
case ssa.Op386MULLconst:
r := gc.SSARegNum(v)
if r != gc.SSARegNum(v.Args[0]) {
v.Fatalf("input[0] and output not in same register %s", v.LongString())
}
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_CONST
p.From.Offset = v.AuxInt
p.To.Type = obj.TYPE_REG
p.To.Reg = r
// TODO: Teach doasm to compile the three-address multiply imul $c, r1, r2
// then we don't need to use resultInArg0 for these ops.
//p.From3 = new(obj.Addr)
//p.From3.Type = obj.TYPE_REG
//p.From3.Reg = gc.SSARegNum(v.Args[0])
case ssa.Op386SUBLconst,
ssa.Op386ADCLconst,
ssa.Op386SBBLconst,
ssa.Op386ANDLconst,
ssa.Op386ORLconst,
ssa.Op386XORLconst,
ssa.Op386SHLLconst,
ssa.Op386SHRLconst, ssa.Op386SHRWconst, ssa.Op386SHRBconst,
ssa.Op386SARLconst, ssa.Op386SARWconst, ssa.Op386SARBconst,
ssa.Op386ROLLconst, ssa.Op386ROLWconst, ssa.Op386ROLBconst:
r := gc.SSARegNum(v)
if r != gc.SSARegNum(v.Args[0]) {
v.Fatalf("input[0] and output not in same register %s", v.LongString())
}
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_CONST
p.From.Offset = v.AuxInt
p.To.Type = obj.TYPE_REG
p.To.Reg = r
case ssa.Op386SBBLcarrymask:
r := gc.SSARegNum(v)
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = r
p.To.Type = obj.TYPE_REG
p.To.Reg = r
case ssa.Op386LEAL1, ssa.Op386LEAL2, ssa.Op386LEAL4, ssa.Op386LEAL8:
r := gc.SSARegNum(v.Args[0])
i := gc.SSARegNum(v.Args[1])
p := gc.Prog(x86.ALEAL)
switch v.Op {
case ssa.Op386LEAL1:
p.From.Scale = 1
if i == x86.REG_SP {
r, i = i, r
}
case ssa.Op386LEAL2:
p.From.Scale = 2
case ssa.Op386LEAL4:
p.From.Scale = 4
case ssa.Op386LEAL8:
p.From.Scale = 8
}
p.From.Type = obj.TYPE_MEM
p.From.Reg = r
p.From.Index = i
gc.AddAux(&p.From, v)
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.Op386LEAL:
p := gc.Prog(x86.ALEAL)
p.From.Type = obj.TYPE_MEM
p.From.Reg = gc.SSARegNum(v.Args[0])
gc.AddAux(&p.From, v)
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.Op386CMPL, ssa.Op386CMPW, ssa.Op386CMPB,
ssa.Op386TESTL, ssa.Op386TESTW, ssa.Op386TESTB:
opregreg(v.Op.Asm(), gc.SSARegNum(v.Args[1]), gc.SSARegNum(v.Args[0]))
case ssa.Op386UCOMISS, ssa.Op386UCOMISD:
// Go assembler has swapped operands for UCOMISx relative to CMP,
// must account for that right here.
opregreg(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]))
case ssa.Op386CMPLconst, ssa.Op386CMPWconst, ssa.Op386CMPBconst:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[0])
p.To.Type = obj.TYPE_CONST
p.To.Offset = v.AuxInt
case ssa.Op386TESTLconst, ssa.Op386TESTWconst, ssa.Op386TESTBconst:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_CONST
p.From.Offset = v.AuxInt
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v.Args[0])
case ssa.Op386MOVLconst:
x := gc.SSARegNum(v)
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_CONST
p.From.Offset = v.AuxInt
p.To.Type = obj.TYPE_REG
p.To.Reg = x
// If flags are live at this instruction, suppress the
// MOV $0,AX -> XOR AX,AX optimization.
if v.Aux != nil {
p.Mark |= x86.PRESERVEFLAGS
}
case ssa.Op386MOVSSconst, ssa.Op386MOVSDconst:
x := gc.SSARegNum(v)
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_FCONST
p.From.Val = math.Float64frombits(uint64(v.AuxInt))
p.To.Type = obj.TYPE_REG
p.To.Reg = x
case ssa.Op386MOVSSconst1, ssa.Op386MOVSDconst1:
var literal string
if v.Op == ssa.Op386MOVSDconst1 {
literal = fmt.Sprintf("$f64.%016x", uint64(v.AuxInt))
} else {
literal = fmt.Sprintf("$f32.%08x", math.Float32bits(float32(math.Float64frombits(uint64(v.AuxInt)))))
}
p := gc.Prog(x86.ALEAL)
p.From.Type = obj.TYPE_MEM
p.From.Name = obj.NAME_EXTERN
p.From.Sym = obj.Linklookup(gc.Ctxt, literal, 0)
p.From.Sym.Local = true
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.Op386MOVSSconst2, ssa.Op386MOVSDconst2:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_MEM
p.From.Reg = gc.SSARegNum(v.Args[0])
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.Op386MOVSSload, ssa.Op386MOVSDload, ssa.Op386MOVLload, ssa.Op386MOVWload, ssa.Op386MOVBload, ssa.Op386MOVBLSXload, ssa.Op386MOVWLSXload:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_MEM
p.From.Reg = gc.SSARegNum(v.Args[0])
gc.AddAux(&p.From, v)
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.Op386MOVSDloadidx8:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_MEM
p.From.Reg = gc.SSARegNum(v.Args[0])
gc.AddAux(&p.From, v)
p.From.Scale = 8
p.From.Index = gc.SSARegNum(v.Args[1])
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.Op386MOVLloadidx4, ssa.Op386MOVSSloadidx4:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_MEM
p.From.Reg = gc.SSARegNum(v.Args[0])
gc.AddAux(&p.From, v)
p.From.Scale = 4
p.From.Index = gc.SSARegNum(v.Args[1])
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.Op386MOVWloadidx2:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_MEM
p.From.Reg = gc.SSARegNum(v.Args[0])
gc.AddAux(&p.From, v)
p.From.Scale = 2
p.From.Index = gc.SSARegNum(v.Args[1])
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.Op386MOVBloadidx1, ssa.Op386MOVWloadidx1, ssa.Op386MOVLloadidx1, ssa.Op386MOVSSloadidx1, ssa.Op386MOVSDloadidx1:
r := gc.SSARegNum(v.Args[0])
i := gc.SSARegNum(v.Args[1])
if i == x86.REG_SP {
r, i = i, r
}
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_MEM
p.From.Reg = r
p.From.Scale = 1
p.From.Index = i
gc.AddAux(&p.From, v)
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.Op386MOVSSstore, ssa.Op386MOVSDstore, ssa.Op386MOVLstore, ssa.Op386MOVWstore, ssa.Op386MOVBstore:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[1])
p.To.Type = obj.TYPE_MEM
p.To.Reg = gc.SSARegNum(v.Args[0])
gc.AddAux(&p.To, v)
case ssa.Op386MOVSDstoreidx8:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[2])
p.To.Type = obj.TYPE_MEM
p.To.Reg = gc.SSARegNum(v.Args[0])
p.To.Scale = 8
p.To.Index = gc.SSARegNum(v.Args[1])
gc.AddAux(&p.To, v)
case ssa.Op386MOVSSstoreidx4, ssa.Op386MOVLstoreidx4:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[2])
p.To.Type = obj.TYPE_MEM
p.To.Reg = gc.SSARegNum(v.Args[0])
p.To.Scale = 4
p.To.Index = gc.SSARegNum(v.Args[1])
gc.AddAux(&p.To, v)
case ssa.Op386MOVWstoreidx2:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[2])
p.To.Type = obj.TYPE_MEM
p.To.Reg = gc.SSARegNum(v.Args[0])
p.To.Scale = 2
p.To.Index = gc.SSARegNum(v.Args[1])
gc.AddAux(&p.To, v)
case ssa.Op386MOVBstoreidx1, ssa.Op386MOVWstoreidx1, ssa.Op386MOVLstoreidx1, ssa.Op386MOVSSstoreidx1, ssa.Op386MOVSDstoreidx1:
r := gc.SSARegNum(v.Args[0])
i := gc.SSARegNum(v.Args[1])
if i == x86.REG_SP {
r, i = i, r
}
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[2])
p.To.Type = obj.TYPE_MEM
p.To.Reg = r
p.To.Scale = 1
p.To.Index = i
gc.AddAux(&p.To, v)
case ssa.Op386MOVLstoreconst, ssa.Op386MOVWstoreconst, ssa.Op386MOVBstoreconst:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_CONST
sc := v.AuxValAndOff()
p.From.Offset = sc.Val()
p.To.Type = obj.TYPE_MEM
p.To.Reg = gc.SSARegNum(v.Args[0])
gc.AddAux2(&p.To, v, sc.Off())
case ssa.Op386MOVLstoreconstidx1, ssa.Op386MOVLstoreconstidx4, ssa.Op386MOVWstoreconstidx1, ssa.Op386MOVWstoreconstidx2, ssa.Op386MOVBstoreconstidx1:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_CONST
sc := v.AuxValAndOff()
p.From.Offset = sc.Val()
r := gc.SSARegNum(v.Args[0])
i := gc.SSARegNum(v.Args[1])
switch v.Op {
case ssa.Op386MOVBstoreconstidx1, ssa.Op386MOVWstoreconstidx1, ssa.Op386MOVLstoreconstidx1:
p.To.Scale = 1
if i == x86.REG_SP {
r, i = i, r
}
case ssa.Op386MOVWstoreconstidx2:
p.To.Scale = 2
case ssa.Op386MOVLstoreconstidx4:
p.To.Scale = 4
}
p.To.Type = obj.TYPE_MEM
p.To.Reg = r
p.To.Index = i
gc.AddAux2(&p.To, v, sc.Off())
case ssa.Op386MOVWLSX, ssa.Op386MOVBLSX, ssa.Op386MOVWLZX, ssa.Op386MOVBLZX,
ssa.Op386CVTSL2SS, ssa.Op386CVTSL2SD,
ssa.Op386CVTTSS2SL, ssa.Op386CVTTSD2SL,
ssa.Op386CVTSS2SD, ssa.Op386CVTSD2SS:
opregreg(v.Op.Asm(), gc.SSARegNum(v), gc.SSARegNum(v.Args[0]))
case ssa.Op386DUFFZERO:
p := gc.Prog(obj.ADUFFZERO)
p.To.Type = obj.TYPE_ADDR
p.To.Sym = gc.Linksym(gc.Pkglookup("duffzero", gc.Runtimepkg))
p.To.Offset = v.AuxInt
case ssa.Op386DUFFCOPY:
p := gc.Prog(obj.ADUFFCOPY)
p.To.Type = obj.TYPE_ADDR
p.To.Sym = gc.Linksym(gc.Pkglookup("duffcopy", gc.Runtimepkg))
p.To.Offset = v.AuxInt
case ssa.OpCopy, ssa.Op386MOVLconvert: // TODO: use MOVLreg for reg->reg copies instead of OpCopy?
if v.Type.IsMemory() {
return
}
x := gc.SSARegNum(v.Args[0])
y := gc.SSARegNum(v)
if x != y {
opregreg(moveByType(v.Type), y, x)
}
case ssa.OpLoadReg:
if v.Type.IsFlags() {
v.Unimplementedf("load flags not implemented: %v", v.LongString())
return
}
p := gc.Prog(loadByType(v.Type))
n, off := gc.AutoVar(v.Args[0])
p.From.Type = obj.TYPE_MEM
p.From.Node = n
p.From.Sym = gc.Linksym(n.Sym)
p.From.Offset = off
if n.Class == gc.PPARAM || n.Class == gc.PPARAMOUT {
p.From.Name = obj.NAME_PARAM
p.From.Offset += n.Xoffset
} else {
p.From.Name = obj.NAME_AUTO
}
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.OpStoreReg:
if v.Type.IsFlags() {
v.Unimplementedf("store flags not implemented: %v", v.LongString())
return
}
p := gc.Prog(storeByType(v.Type))
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[0])
n, off := gc.AutoVar(v)
p.To.Type = obj.TYPE_MEM
p.To.Node = n
p.To.Sym = gc.Linksym(n.Sym)
p.To.Offset = off
if n.Class == gc.PPARAM || n.Class == gc.PPARAMOUT {
p.To.Name = obj.NAME_PARAM
p.To.Offset += n.Xoffset
} else {
p.To.Name = obj.NAME_AUTO
}
case ssa.OpPhi:
gc.CheckLoweredPhi(v)
case ssa.OpInitMem:
// memory arg needs no code
case ssa.OpArg:
// input args need no code
case ssa.Op386LoweredGetClosurePtr:
// Closure pointer is DX.
gc.CheckLoweredGetClosurePtr(v)
case ssa.Op386LoweredGetG:
r := gc.SSARegNum(v)
// See the comments in cmd/internal/obj/x86/obj6.go
// near CanUse1InsnTLS for a detailed explanation of these instructions.
if x86.CanUse1InsnTLS(gc.Ctxt) {
// MOVL (TLS), r
p := gc.Prog(x86.AMOVL)
p.From.Type = obj.TYPE_MEM
p.From.Reg = x86.REG_TLS
p.To.Type = obj.TYPE_REG
p.To.Reg = r
} else {
// MOVL TLS, r
// MOVL (r)(TLS*1), r
p := gc.Prog(x86.AMOVL)
p.From.Type = obj.TYPE_REG
p.From.Reg = x86.REG_TLS
p.To.Type = obj.TYPE_REG
p.To.Reg = r
q := gc.Prog(x86.AMOVL)
q.From.Type = obj.TYPE_MEM
q.From.Reg = r
q.From.Index = x86.REG_TLS
q.From.Scale = 1
q.To.Type = obj.TYPE_REG
q.To.Reg = r
}
case ssa.Op386CALLstatic:
if v.Aux.(*gc.Sym) == gc.Deferreturn.Sym {
// Deferred calls will appear to be returning to
// the CALL deferreturn(SB) that we are about to emit.
// However, the stack trace code will show the line
// of the instruction byte before the return PC.
// To avoid that being an unrelated instruction,
// insert an actual hardware NOP that will have the right line number.
// This is different from obj.ANOP, which is a virtual no-op
// that doesn't make it into the instruction stream.
ginsnop()
}
p := gc.Prog(obj.ACALL)
p.To.Type = obj.TYPE_MEM
p.To.Name = obj.NAME_EXTERN
p.To.Sym = gc.Linksym(v.Aux.(*gc.Sym))
if gc.Maxarg < v.AuxInt {
gc.Maxarg = v.AuxInt
}
case ssa.Op386CALLclosure:
p := gc.Prog(obj.ACALL)
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v.Args[0])
if gc.Maxarg < v.AuxInt {
gc.Maxarg = v.AuxInt
}
case ssa.Op386CALLdefer:
p := gc.Prog(obj.ACALL)
p.To.Type = obj.TYPE_MEM
p.To.Name = obj.NAME_EXTERN
p.To.Sym = gc.Linksym(gc.Deferproc.Sym)
if gc.Maxarg < v.AuxInt {
gc.Maxarg = v.AuxInt
}
case ssa.Op386CALLgo:
p := gc.Prog(obj.ACALL)
p.To.Type = obj.TYPE_MEM
p.To.Name = obj.NAME_EXTERN
p.To.Sym = gc.Linksym(gc.Newproc.Sym)
if gc.Maxarg < v.AuxInt {
gc.Maxarg = v.AuxInt
}
case ssa.Op386CALLinter:
p := gc.Prog(obj.ACALL)
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v.Args[0])
if gc.Maxarg < v.AuxInt {
gc.Maxarg = v.AuxInt
}
case ssa.Op386NEGL,
ssa.Op386BSWAPL,
ssa.Op386NOTL:
r := gc.SSARegNum(v)
if r != gc.SSARegNum(v.Args[0]) {
v.Fatalf("input[0] and output not in same register %s", v.LongString())
}
p := gc.Prog(v.Op.Asm())
p.To.Type = obj.TYPE_REG
p.To.Reg = r
case ssa.Op386BSFL, ssa.Op386BSFW,
ssa.Op386BSRL, ssa.Op386BSRW,
ssa.Op386SQRTSD:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[0])
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.OpSP, ssa.OpSB, ssa.OpSelect0, ssa.OpSelect1:
// nothing to do
case ssa.Op386SETEQ, ssa.Op386SETNE,
ssa.Op386SETL, ssa.Op386SETLE,
ssa.Op386SETG, ssa.Op386SETGE,
ssa.Op386SETGF, ssa.Op386SETGEF,
ssa.Op386SETB, ssa.Op386SETBE,
ssa.Op386SETORD, ssa.Op386SETNAN,
ssa.Op386SETA, ssa.Op386SETAE:
p := gc.Prog(v.Op.Asm())
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.Op386SETNEF:
p := gc.Prog(v.Op.Asm())
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
q := gc.Prog(x86.ASETPS)
q.To.Type = obj.TYPE_REG
q.To.Reg = x86.REG_AX
opregreg(x86.AORL, gc.SSARegNum(v), x86.REG_AX)
case ssa.Op386SETEQF:
p := gc.Prog(v.Op.Asm())
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
q := gc.Prog(x86.ASETPC)
q.To.Type = obj.TYPE_REG
q.To.Reg = x86.REG_AX
opregreg(x86.AANDL, gc.SSARegNum(v), x86.REG_AX)
case ssa.Op386InvertFlags:
v.Fatalf("InvertFlags should never make it to codegen %v", v.LongString())
case ssa.Op386FlagEQ, ssa.Op386FlagLT_ULT, ssa.Op386FlagLT_UGT, ssa.Op386FlagGT_ULT, ssa.Op386FlagGT_UGT:
v.Fatalf("Flag* ops should never make it to codegen %v", v.LongString())
case ssa.Op386REPSTOSL:
gc.Prog(x86.AREP)
gc.Prog(x86.ASTOSL)
case ssa.Op386REPMOVSL:
gc.Prog(x86.AREP)
gc.Prog(x86.AMOVSL)
case ssa.OpVarDef:
gc.Gvardef(v.Aux.(*gc.Node))
case ssa.OpVarKill:
gc.Gvarkill(v.Aux.(*gc.Node))
case ssa.OpVarLive:
gc.Gvarlive(v.Aux.(*gc.Node))
case ssa.OpKeepAlive:
if !v.Args[0].Type.IsPtrShaped() {
v.Fatalf("keeping non-pointer alive %v", v.Args[0])
}
n, off := gc.AutoVar(v.Args[0])
if n == nil {
v.Fatalf("KeepLive with non-spilled value %s %s", v, v.Args[0])
}
if off != 0 {
v.Fatalf("KeepLive with non-zero offset spill location %s:%d", n, off)
}
gc.Gvarlive(n)
case ssa.Op386LoweredNilCheck:
// Optimization - if the subsequent block has a load or store
// at the same address, we don't need to issue this instruction.
mem := v.Args[1]
for _, w := range v.Block.Succs[0].Block().Values {
if w.Op == ssa.OpPhi {
if w.Type.IsMemory() {
mem = w
}
continue
}
if len(w.Args) == 0 || !w.Args[len(w.Args)-1].Type.IsMemory() {
// w doesn't use a store - can't be a memory op.
continue
}
if w.Args[len(w.Args)-1] != mem {
v.Fatalf("wrong store after nilcheck v=%s w=%s", v, w)
}
switch w.Op {
case ssa.Op386MOVLload, ssa.Op386MOVWload, ssa.Op386MOVBload,
ssa.Op386MOVLstore, ssa.Op386MOVWstore, ssa.Op386MOVBstore,
ssa.Op386MOVBLSXload, ssa.Op386MOVWLSXload,
ssa.Op386MOVSSload, ssa.Op386MOVSDload,
ssa.Op386MOVSSstore, ssa.Op386MOVSDstore:
if w.Args[0] == v.Args[0] && w.Aux == nil && w.AuxInt >= 0 && w.AuxInt < minZeroPage {
if gc.Debug_checknil != 0 && int(v.Line) > 1 {
gc.Warnl(v.Line, "removed nil check")
}
return
}
case ssa.Op386MOVLstoreconst, ssa.Op386MOVWstoreconst, ssa.Op386MOVBstoreconst:
off := ssa.ValAndOff(v.AuxInt).Off()
if w.Args[0] == v.Args[0] && w.Aux == nil && off >= 0 && off < minZeroPage {
if gc.Debug_checknil != 0 && int(v.Line) > 1 {
gc.Warnl(v.Line, "removed nil check")
}
return
}
}
if w.Type.IsMemory() {
if w.Op == ssa.OpVarDef || w.Op == ssa.OpVarKill || w.Op == ssa.OpVarLive {
// these ops are OK
mem = w
continue
}
// We can't delay the nil check past the next store.
break
}
}
// Issue a load which will fault if the input is nil.
// TODO: We currently use the 2-byte instruction TESTB AX, (reg).
// Should we use the 3-byte TESTB $0, (reg) instead? It is larger
// but it doesn't have false dependency on AX.
// Or maybe allocate an output register and use MOVL (reg),reg2 ?
// That trades clobbering flags for clobbering a register.
p := gc.Prog(x86.ATESTB)
p.From.Type = obj.TYPE_REG
p.From.Reg = x86.REG_AX
p.To.Type = obj.TYPE_MEM
p.To.Reg = gc.SSARegNum(v.Args[0])
gc.AddAux(&p.To, v)
if gc.Debug_checknil != 0 && v.Line > 1 { // v.Line==1 in generated wrappers
gc.Warnl(v.Line, "generated nil check")
}
case ssa.Op386FCHS:
v.Fatalf("FCHS in non-387 mode")
default:
v.Unimplementedf("genValue not implemented: %s", v.LongString())
}
}
func ssaGenValue(s *gc.SSAGenState, v *ssa.Value) {
s.SetLineno(v.Line)
switch v.Op {
case ssa.OpInitMem:
// memory arg needs no code
case ssa.OpArg:
// input args need no code
case ssa.OpSP, ssa.OpSB, ssa.OpGetG:
// nothing to do
case ssa.OpCopy, ssa.OpARMMOVWconvert, ssa.OpARMMOVWreg:
if v.Type.IsMemory() {
return
}
x := gc.SSARegNum(v.Args[0])
y := gc.SSARegNum(v)
if x == y {
return
}
as := arm.AMOVW
if v.Type.IsFloat() {
switch v.Type.Size() {
case 4:
as = arm.AMOVF
case 8:
as = arm.AMOVD
default:
panic("bad float size")
}
}
p := gc.Prog(as)
p.From.Type = obj.TYPE_REG
p.From.Reg = x
p.To.Type = obj.TYPE_REG
p.To.Reg = y
case ssa.OpARMMOVWnop:
if gc.SSARegNum(v) != gc.SSARegNum(v.Args[0]) {
v.Fatalf("input[0] and output not in same register %s", v.LongString())
}
// nothing to do
case ssa.OpLoadReg:
if v.Type.IsFlags() {
v.Unimplementedf("load flags not implemented: %v", v.LongString())
return
}
p := gc.Prog(loadByType(v.Type))
n, off := gc.AutoVar(v.Args[0])
p.From.Type = obj.TYPE_MEM
p.From.Node = n
p.From.Sym = gc.Linksym(n.Sym)
p.From.Offset = off
if n.Class == gc.PPARAM || n.Class == gc.PPARAMOUT {
p.From.Name = obj.NAME_PARAM
p.From.Offset += n.Xoffset
} else {
p.From.Name = obj.NAME_AUTO
}
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.OpPhi:
gc.CheckLoweredPhi(v)
case ssa.OpStoreReg:
if v.Type.IsFlags() {
v.Unimplementedf("store flags not implemented: %v", v.LongString())
return
}
p := gc.Prog(storeByType(v.Type))
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[0])
n, off := gc.AutoVar(v)
p.To.Type = obj.TYPE_MEM
p.To.Node = n
p.To.Sym = gc.Linksym(n.Sym)
p.To.Offset = off
if n.Class == gc.PPARAM || n.Class == gc.PPARAMOUT {
p.To.Name = obj.NAME_PARAM
p.To.Offset += n.Xoffset
} else {
p.To.Name = obj.NAME_AUTO
}
case ssa.OpARMDIV,
ssa.OpARMDIVU,
ssa.OpARMMOD,
ssa.OpARMMODU:
// Note: for software division the assembler rewrite these
// instructions to sequence of instructions:
// - it puts numerator in R11 and denominator in g.m.divmod
// and call (say) _udiv
// - _udiv saves R0-R3 on stack and call udiv, restores R0-R3
// before return
// - udiv does the actual work
//TODO: set approperiate regmasks and call udiv directly?
// need to be careful for negative case
// Or, as soft div is already expensive, we don't care?
fallthrough
case ssa.OpARMADD,
ssa.OpARMADC,
ssa.OpARMSUB,
ssa.OpARMSBC,
ssa.OpARMRSB,
ssa.OpARMAND,
ssa.OpARMOR,
ssa.OpARMXOR,
ssa.OpARMBIC,
ssa.OpARMMUL,
ssa.OpARMADDF,
ssa.OpARMADDD,
ssa.OpARMSUBF,
ssa.OpARMSUBD,
ssa.OpARMMULF,
ssa.OpARMMULD,
ssa.OpARMDIVF,
ssa.OpARMDIVD:
r := gc.SSARegNum(v)
r1 := gc.SSARegNum(v.Args[0])
r2 := gc.SSARegNum(v.Args[1])
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = r2
p.Reg = r1
p.To.Type = obj.TYPE_REG
p.To.Reg = r
case ssa.OpARMADDS,
ssa.OpARMSUBS:
r := gc.SSARegNum1(v)
r1 := gc.SSARegNum(v.Args[0])
r2 := gc.SSARegNum(v.Args[1])
p := gc.Prog(v.Op.Asm())
p.Scond = arm.C_SBIT
p.From.Type = obj.TYPE_REG
p.From.Reg = r2
p.Reg = r1
p.To.Type = obj.TYPE_REG
p.To.Reg = r
case ssa.OpARMSLL,
ssa.OpARMSRL,
ssa.OpARMSRA:
r := gc.SSARegNum(v)
r1 := gc.SSARegNum(v.Args[0])
r2 := gc.SSARegNum(v.Args[1])
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = r2
p.Reg = r1
p.To.Type = obj.TYPE_REG
p.To.Reg = r
case ssa.OpARMSRAcond:
// ARM shift instructions uses only the low-order byte of the shift amount
// generate conditional instructions to deal with large shifts
// flag is already set
// SRA.HS $31, Rarg0, Rdst // shift 31 bits to get the sign bit
// SRA.LO Rarg1, Rarg0, Rdst
r := gc.SSARegNum(v)
r1 := gc.SSARegNum(v.Args[0])
r2 := gc.SSARegNum(v.Args[1])
p := gc.Prog(arm.ASRA)
p.Scond = arm.C_SCOND_HS
p.From.Type = obj.TYPE_CONST
p.From.Offset = 31
p.Reg = r1
p.To.Type = obj.TYPE_REG
p.To.Reg = r
p = gc.Prog(arm.ASRA)
p.Scond = arm.C_SCOND_LO
p.From.Type = obj.TYPE_REG
p.From.Reg = r2
p.Reg = r1
p.To.Type = obj.TYPE_REG
p.To.Reg = r
case ssa.OpARMADDconst,
ssa.OpARMADCconst,
ssa.OpARMSUBconst,
ssa.OpARMSBCconst,
ssa.OpARMRSBconst,
ssa.OpARMRSCconst,
ssa.OpARMANDconst,
ssa.OpARMORconst,
ssa.OpARMXORconst,
ssa.OpARMBICconst,
ssa.OpARMSLLconst,
ssa.OpARMSRLconst,
ssa.OpARMSRAconst:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_CONST
p.From.Offset = v.AuxInt
p.Reg = gc.SSARegNum(v.Args[0])
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.OpARMADDSconst,
ssa.OpARMSUBSconst,
ssa.OpARMRSBSconst:
p := gc.Prog(v.Op.Asm())
p.Scond = arm.C_SBIT
p.From.Type = obj.TYPE_CONST
p.From.Offset = v.AuxInt
p.Reg = gc.SSARegNum(v.Args[0])
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum1(v)
case ssa.OpARMSRRconst:
genshift(arm.AMOVW, 0, gc.SSARegNum(v.Args[0]), gc.SSARegNum(v), arm.SHIFT_RR, v.AuxInt)
case ssa.OpARMADDshiftLL,
ssa.OpARMADCshiftLL,
ssa.OpARMSUBshiftLL,
ssa.OpARMSBCshiftLL,
ssa.OpARMRSBshiftLL,
ssa.OpARMRSCshiftLL,
ssa.OpARMANDshiftLL,
ssa.OpARMORshiftLL,
ssa.OpARMXORshiftLL,
ssa.OpARMBICshiftLL:
genshift(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]), gc.SSARegNum(v), arm.SHIFT_LL, v.AuxInt)
case ssa.OpARMADDSshiftLL,
ssa.OpARMSUBSshiftLL,
ssa.OpARMRSBSshiftLL:
p := genshift(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]), gc.SSARegNum1(v), arm.SHIFT_LL, v.AuxInt)
p.Scond = arm.C_SBIT
case ssa.OpARMADDshiftRL,
ssa.OpARMADCshiftRL,
ssa.OpARMSUBshiftRL,
ssa.OpARMSBCshiftRL,
ssa.OpARMRSBshiftRL,
ssa.OpARMRSCshiftRL,
ssa.OpARMANDshiftRL,
ssa.OpARMORshiftRL,
ssa.OpARMXORshiftRL,
ssa.OpARMBICshiftRL:
genshift(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]), gc.SSARegNum(v), arm.SHIFT_LR, v.AuxInt)
case ssa.OpARMADDSshiftRL,
ssa.OpARMSUBSshiftRL,
ssa.OpARMRSBSshiftRL:
p := genshift(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]), gc.SSARegNum1(v), arm.SHIFT_LR, v.AuxInt)
p.Scond = arm.C_SBIT
case ssa.OpARMADDshiftRA,
ssa.OpARMADCshiftRA,
ssa.OpARMSUBshiftRA,
ssa.OpARMSBCshiftRA,
ssa.OpARMRSBshiftRA,
ssa.OpARMRSCshiftRA,
ssa.OpARMANDshiftRA,
ssa.OpARMORshiftRA,
ssa.OpARMXORshiftRA,
ssa.OpARMBICshiftRA:
genshift(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]), gc.SSARegNum(v), arm.SHIFT_AR, v.AuxInt)
case ssa.OpARMADDSshiftRA,
ssa.OpARMSUBSshiftRA,
ssa.OpARMRSBSshiftRA:
p := genshift(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]), gc.SSARegNum1(v), arm.SHIFT_AR, v.AuxInt)
p.Scond = arm.C_SBIT
case ssa.OpARMMVNshiftLL:
genshift(v.Op.Asm(), 0, gc.SSARegNum(v.Args[0]), gc.SSARegNum(v), arm.SHIFT_LL, v.AuxInt)
case ssa.OpARMMVNshiftRL:
genshift(v.Op.Asm(), 0, gc.SSARegNum(v.Args[0]), gc.SSARegNum(v), arm.SHIFT_LR, v.AuxInt)
case ssa.OpARMMVNshiftRA:
genshift(v.Op.Asm(), 0, gc.SSARegNum(v.Args[0]), gc.SSARegNum(v), arm.SHIFT_AR, v.AuxInt)
case ssa.OpARMMVNshiftLLreg:
genregshift(v.Op.Asm(), 0, gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]), gc.SSARegNum(v), arm.SHIFT_LL)
case ssa.OpARMMVNshiftRLreg:
genregshift(v.Op.Asm(), 0, gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]), gc.SSARegNum(v), arm.SHIFT_LR)
case ssa.OpARMMVNshiftRAreg:
genregshift(v.Op.Asm(), 0, gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]), gc.SSARegNum(v), arm.SHIFT_AR)
case ssa.OpARMADDshiftLLreg,
ssa.OpARMADCshiftLLreg,
ssa.OpARMSUBshiftLLreg,
ssa.OpARMSBCshiftLLreg,
ssa.OpARMRSBshiftLLreg,
ssa.OpARMRSCshiftLLreg,
ssa.OpARMANDshiftLLreg,
ssa.OpARMORshiftLLreg,
ssa.OpARMXORshiftLLreg,
ssa.OpARMBICshiftLLreg:
genregshift(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]), gc.SSARegNum(v.Args[2]), gc.SSARegNum(v), arm.SHIFT_LL)
case ssa.OpARMADDSshiftLLreg,
ssa.OpARMSUBSshiftLLreg,
ssa.OpARMRSBSshiftLLreg:
p := genregshift(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]), gc.SSARegNum(v.Args[2]), gc.SSARegNum1(v), arm.SHIFT_LL)
p.Scond = arm.C_SBIT
case ssa.OpARMADDshiftRLreg,
ssa.OpARMADCshiftRLreg,
ssa.OpARMSUBshiftRLreg,
ssa.OpARMSBCshiftRLreg,
ssa.OpARMRSBshiftRLreg,
ssa.OpARMRSCshiftRLreg,
ssa.OpARMANDshiftRLreg,
ssa.OpARMORshiftRLreg,
ssa.OpARMXORshiftRLreg,
ssa.OpARMBICshiftRLreg:
genregshift(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]), gc.SSARegNum(v.Args[2]), gc.SSARegNum(v), arm.SHIFT_LR)
case ssa.OpARMADDSshiftRLreg,
ssa.OpARMSUBSshiftRLreg,
ssa.OpARMRSBSshiftRLreg:
p := genregshift(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]), gc.SSARegNum(v.Args[2]), gc.SSARegNum1(v), arm.SHIFT_LR)
p.Scond = arm.C_SBIT
case ssa.OpARMADDshiftRAreg,
ssa.OpARMADCshiftRAreg,
ssa.OpARMSUBshiftRAreg,
ssa.OpARMSBCshiftRAreg,
ssa.OpARMRSBshiftRAreg,
ssa.OpARMRSCshiftRAreg,
ssa.OpARMANDshiftRAreg,
ssa.OpARMORshiftRAreg,
ssa.OpARMXORshiftRAreg,
ssa.OpARMBICshiftRAreg:
genregshift(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]), gc.SSARegNum(v.Args[2]), gc.SSARegNum(v), arm.SHIFT_AR)
case ssa.OpARMADDSshiftRAreg,
ssa.OpARMSUBSshiftRAreg,
ssa.OpARMRSBSshiftRAreg:
p := genregshift(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]), gc.SSARegNum(v.Args[2]), gc.SSARegNum1(v), arm.SHIFT_AR)
p.Scond = arm.C_SBIT
case ssa.OpARMHMUL,
ssa.OpARMHMULU:
// 32-bit high multiplication
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[0])
p.Reg = gc.SSARegNum(v.Args[1])
p.To.Type = obj.TYPE_REGREG
p.To.Reg = gc.SSARegNum(v)
p.To.Offset = arm.REGTMP // throw away low 32-bit into tmp register
case ssa.OpARMMULLU:
// 32-bit multiplication, results 64-bit, high 32-bit in out0, low 32-bit in out1
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[0])
p.Reg = gc.SSARegNum(v.Args[1])
p.To.Type = obj.TYPE_REGREG
p.To.Reg = gc.SSARegNum0(v) // high 32-bit
p.To.Offset = int64(gc.SSARegNum1(v)) // low 32-bit
case ssa.OpARMMULA:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[0])
p.Reg = gc.SSARegNum(v.Args[1])
p.To.Type = obj.TYPE_REGREG2
p.To.Reg = gc.SSARegNum(v) // result
p.To.Offset = int64(gc.SSARegNum(v.Args[2])) // addend
case ssa.OpARMMOVWconst:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_CONST
p.From.Offset = v.AuxInt
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.OpARMMOVFconst,
ssa.OpARMMOVDconst:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_FCONST
p.From.Val = math.Float64frombits(uint64(v.AuxInt))
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.OpARMCMP,
ssa.OpARMCMN,
ssa.OpARMTST,
ssa.OpARMTEQ,
ssa.OpARMCMPF,
ssa.OpARMCMPD:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
// Special layout in ARM assembly
// Comparing to x86, the operands of ARM's CMP are reversed.
p.From.Reg = gc.SSARegNum(v.Args[1])
p.Reg = gc.SSARegNum(v.Args[0])
case ssa.OpARMCMPconst,
ssa.OpARMCMNconst,
ssa.OpARMTSTconst,
ssa.OpARMTEQconst:
// Special layout in ARM assembly
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_CONST
p.From.Offset = v.AuxInt
p.Reg = gc.SSARegNum(v.Args[0])
case ssa.OpARMCMPF0,
ssa.OpARMCMPD0:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[0])
case ssa.OpARMCMPshiftLL:
genshift(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]), 0, arm.SHIFT_LL, v.AuxInt)
case ssa.OpARMCMPshiftRL:
genshift(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]), 0, arm.SHIFT_LR, v.AuxInt)
case ssa.OpARMCMPshiftRA:
genshift(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]), 0, arm.SHIFT_AR, v.AuxInt)
case ssa.OpARMCMPshiftLLreg:
genregshift(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]), gc.SSARegNum(v.Args[2]), 0, arm.SHIFT_LL)
case ssa.OpARMCMPshiftRLreg:
genregshift(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]), gc.SSARegNum(v.Args[2]), 0, arm.SHIFT_LR)
case ssa.OpARMCMPshiftRAreg:
genregshift(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]), gc.SSARegNum(v.Args[2]), 0, arm.SHIFT_AR)
case ssa.OpARMMOVWaddr:
p := gc.Prog(arm.AMOVW)
p.From.Type = obj.TYPE_ADDR
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
var wantreg string
// MOVW $sym+off(base), R
// the assembler expands it as the following:
// - base is SP: add constant offset to SP (R13)
// when constant is large, tmp register (R11) may be used
// - base is SB: load external address from constant pool (use relocation)
switch v.Aux.(type) {
default:
v.Fatalf("aux is of unknown type %T", v.Aux)
case *ssa.ExternSymbol:
wantreg = "SB"
gc.AddAux(&p.From, v)
case *ssa.ArgSymbol, *ssa.AutoSymbol:
wantreg = "SP"
gc.AddAux(&p.From, v)
case nil:
// No sym, just MOVW $off(SP), R
wantreg = "SP"
p.From.Reg = arm.REGSP
p.From.Offset = v.AuxInt
}
if reg := gc.SSAReg(v.Args[0]); reg.Name() != wantreg {
v.Fatalf("bad reg %s for symbol type %T, want %s", reg.Name(), v.Aux, wantreg)
}
case ssa.OpARMMOVBload,
ssa.OpARMMOVBUload,
ssa.OpARMMOVHload,
ssa.OpARMMOVHUload,
ssa.OpARMMOVWload,
ssa.OpARMMOVFload,
ssa.OpARMMOVDload:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_MEM
p.From.Reg = gc.SSARegNum(v.Args[0])
gc.AddAux(&p.From, v)
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.OpARMMOVBstore,
ssa.OpARMMOVHstore,
ssa.OpARMMOVWstore,
ssa.OpARMMOVFstore,
ssa.OpARMMOVDstore:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[1])
p.To.Type = obj.TYPE_MEM
p.To.Reg = gc.SSARegNum(v.Args[0])
gc.AddAux(&p.To, v)
case ssa.OpARMMOVWloadidx:
// this is just shift 0 bits
fallthrough
case ssa.OpARMMOVWloadshiftLL:
p := genshift(v.Op.Asm(), 0, gc.SSARegNum(v.Args[1]), gc.SSARegNum(v), arm.SHIFT_LL, v.AuxInt)
p.From.Reg = gc.SSARegNum(v.Args[0])
case ssa.OpARMMOVWloadshiftRL:
p := genshift(v.Op.Asm(), 0, gc.SSARegNum(v.Args[1]), gc.SSARegNum(v), arm.SHIFT_LR, v.AuxInt)
p.From.Reg = gc.SSARegNum(v.Args[0])
case ssa.OpARMMOVWloadshiftRA:
p := genshift(v.Op.Asm(), 0, gc.SSARegNum(v.Args[1]), gc.SSARegNum(v), arm.SHIFT_AR, v.AuxInt)
p.From.Reg = gc.SSARegNum(v.Args[0])
case ssa.OpARMMOVWstoreidx:
// this is just shift 0 bits
fallthrough
case ssa.OpARMMOVWstoreshiftLL:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[2])
p.To.Type = obj.TYPE_SHIFT
p.To.Reg = gc.SSARegNum(v.Args[0])
p.To.Offset = int64(makeshift(gc.SSARegNum(v.Args[1]), arm.SHIFT_LL, v.AuxInt))
case ssa.OpARMMOVWstoreshiftRL:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[2])
p.To.Type = obj.TYPE_SHIFT
p.To.Reg = gc.SSARegNum(v.Args[0])
p.To.Offset = int64(makeshift(gc.SSARegNum(v.Args[1]), arm.SHIFT_LR, v.AuxInt))
case ssa.OpARMMOVWstoreshiftRA:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[2])
p.To.Type = obj.TYPE_SHIFT
p.To.Reg = gc.SSARegNum(v.Args[0])
p.To.Offset = int64(makeshift(gc.SSARegNum(v.Args[1]), arm.SHIFT_AR, v.AuxInt))
case ssa.OpARMMOVBreg,
ssa.OpARMMOVBUreg,
ssa.OpARMMOVHreg,
ssa.OpARMMOVHUreg:
a := v.Args[0]
for a.Op == ssa.OpCopy || a.Op == ssa.OpARMMOVWreg || a.Op == ssa.OpARMMOVWnop {
a = a.Args[0]
}
if a.Op == ssa.OpLoadReg {
t := a.Type
switch {
case v.Op == ssa.OpARMMOVBreg && t.Size() == 1 && t.IsSigned(),
v.Op == ssa.OpARMMOVBUreg && t.Size() == 1 && !t.IsSigned(),
v.Op == ssa.OpARMMOVHreg && t.Size() == 2 && t.IsSigned(),
v.Op == ssa.OpARMMOVHUreg && t.Size() == 2 && !t.IsSigned():
// arg is a proper-typed load, already zero/sign-extended, don't extend again
if gc.SSARegNum(v) == gc.SSARegNum(v.Args[0]) {
return
}
p := gc.Prog(arm.AMOVW)
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[0])
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
return
default:
}
}
fallthrough
case ssa.OpARMMVN,
ssa.OpARMSQRTD,
ssa.OpARMNEGF,
ssa.OpARMNEGD,
ssa.OpARMMOVWF,
ssa.OpARMMOVWD,
ssa.OpARMMOVFW,
ssa.OpARMMOVDW,
ssa.OpARMMOVFD,
ssa.OpARMMOVDF:
p := gc.Prog(v.Op.Asm())
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[0])
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.OpARMMOVWUF,
ssa.OpARMMOVWUD,
ssa.OpARMMOVFWU,
ssa.OpARMMOVDWU:
p := gc.Prog(v.Op.Asm())
p.Scond = arm.C_UBIT
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[0])
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.OpARMCMOVWHSconst:
p := gc.Prog(arm.AMOVW)
p.Scond = arm.C_SCOND_HS
p.From.Type = obj.TYPE_CONST
p.From.Offset = v.AuxInt
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.OpARMCMOVWLSconst:
p := gc.Prog(arm.AMOVW)
p.Scond = arm.C_SCOND_LS
p.From.Type = obj.TYPE_CONST
p.From.Offset = v.AuxInt
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.OpARMCALLstatic:
if v.Aux.(*gc.Sym) == gc.Deferreturn.Sym {
// Deferred calls will appear to be returning to
// the CALL deferreturn(SB) that we are about to emit.
// However, the stack trace code will show the line
// of the instruction byte before the return PC.
// To avoid that being an unrelated instruction,
// insert an actual hardware NOP that will have the right line number.
// This is different from obj.ANOP, which is a virtual no-op
// that doesn't make it into the instruction stream.
ginsnop()
}
p := gc.Prog(obj.ACALL)
p.To.Type = obj.TYPE_MEM
p.To.Name = obj.NAME_EXTERN
p.To.Sym = gc.Linksym(v.Aux.(*gc.Sym))
if gc.Maxarg < v.AuxInt {
gc.Maxarg = v.AuxInt
}
case ssa.OpARMCALLclosure:
p := gc.Prog(obj.ACALL)
p.To.Type = obj.TYPE_MEM
p.To.Offset = 0
p.To.Reg = gc.SSARegNum(v.Args[0])
if gc.Maxarg < v.AuxInt {
gc.Maxarg = v.AuxInt
}
case ssa.OpARMCALLdefer:
p := gc.Prog(obj.ACALL)
p.To.Type = obj.TYPE_MEM
p.To.Name = obj.NAME_EXTERN
p.To.Sym = gc.Linksym(gc.Deferproc.Sym)
if gc.Maxarg < v.AuxInt {
gc.Maxarg = v.AuxInt
}
case ssa.OpARMCALLgo:
p := gc.Prog(obj.ACALL)
p.To.Type = obj.TYPE_MEM
p.To.Name = obj.NAME_EXTERN
p.To.Sym = gc.Linksym(gc.Newproc.Sym)
if gc.Maxarg < v.AuxInt {
gc.Maxarg = v.AuxInt
}
case ssa.OpARMCALLinter:
p := gc.Prog(obj.ACALL)
p.To.Type = obj.TYPE_MEM
p.To.Offset = 0
p.To.Reg = gc.SSARegNum(v.Args[0])
if gc.Maxarg < v.AuxInt {
gc.Maxarg = v.AuxInt
}
case ssa.OpARMDUFFZERO:
p := gc.Prog(obj.ADUFFZERO)
p.To.Type = obj.TYPE_MEM
p.To.Name = obj.NAME_EXTERN
p.To.Sym = gc.Linksym(gc.Pkglookup("duffzero", gc.Runtimepkg))
p.To.Offset = v.AuxInt
case ssa.OpARMDUFFCOPY:
p := gc.Prog(obj.ADUFFCOPY)
p.To.Type = obj.TYPE_MEM
p.To.Name = obj.NAME_EXTERN
p.To.Sym = gc.Linksym(gc.Pkglookup("duffcopy", gc.Runtimepkg))
p.To.Offset = v.AuxInt
case ssa.OpARMLoweredNilCheck:
// Optimization - if the subsequent block has a load or store
// at the same address, we don't need to issue this instruction.
mem := v.Args[1]
for _, w := range v.Block.Succs[0].Block().Values {
if w.Op == ssa.OpPhi {
if w.Type.IsMemory() {
mem = w
}
continue
}
if len(w.Args) == 0 || !w.Args[len(w.Args)-1].Type.IsMemory() {
// w doesn't use a store - can't be a memory op.
continue
}
if w.Args[len(w.Args)-1] != mem {
v.Fatalf("wrong store after nilcheck v=%s w=%s", v, w)
}
switch w.Op {
case ssa.OpARMMOVBload, ssa.OpARMMOVBUload, ssa.OpARMMOVHload, ssa.OpARMMOVHUload,
ssa.OpARMMOVWload, ssa.OpARMMOVFload, ssa.OpARMMOVDload,
ssa.OpARMMOVBstore, ssa.OpARMMOVHstore, ssa.OpARMMOVWstore,
ssa.OpARMMOVFstore, ssa.OpARMMOVDstore:
// arg0 is ptr, auxint is offset
if w.Args[0] == v.Args[0] && w.Aux == nil && w.AuxInt >= 0 && w.AuxInt < minZeroPage {
if gc.Debug_checknil != 0 && int(v.Line) > 1 {
gc.Warnl(v.Line, "removed nil check")
}
return
}
case ssa.OpARMDUFFZERO, ssa.OpARMLoweredZero:
// arg0 is ptr
if w.Args[0] == v.Args[0] {
if gc.Debug_checknil != 0 && int(v.Line) > 1 {
gc.Warnl(v.Line, "removed nil check")
}
return
}
case ssa.OpARMDUFFCOPY, ssa.OpARMLoweredMove:
// arg0 is dst ptr, arg1 is src ptr
if w.Args[0] == v.Args[0] || w.Args[1] == v.Args[0] {
if gc.Debug_checknil != 0 && int(v.Line) > 1 {
gc.Warnl(v.Line, "removed nil check")
}
return
}
default:
}
if w.Type.IsMemory() {
if w.Op == ssa.OpVarDef || w.Op == ssa.OpVarKill || w.Op == ssa.OpVarLive {
// these ops are OK
mem = w
continue
}
// We can't delay the nil check past the next store.
break
}
}
// Issue a load which will fault if arg is nil.
p := gc.Prog(arm.AMOVB)
p.From.Type = obj.TYPE_MEM
p.From.Reg = gc.SSARegNum(v.Args[0])
gc.AddAux(&p.From, v)
p.To.Type = obj.TYPE_REG
p.To.Reg = arm.REGTMP
if gc.Debug_checknil != 0 && v.Line > 1 { // v.Line==1 in generated wrappers
gc.Warnl(v.Line, "generated nil check")
}
case ssa.OpARMLoweredZero:
// MOVW.P Rarg2, 4(R1)
// CMP Rarg1, R1
// BLE -2(PC)
// arg1 is the address of the last element to zero
// arg2 is known to be zero
// auxint is alignment
var sz int64
var mov obj.As
switch {
case v.AuxInt%4 == 0:
sz = 4
mov = arm.AMOVW
case v.AuxInt%2 == 0:
sz = 2
mov = arm.AMOVH
default:
sz = 1
mov = arm.AMOVB
}
p := gc.Prog(mov)
p.Scond = arm.C_PBIT
p.From.Type = obj.TYPE_REG
p.From.Reg = gc.SSARegNum(v.Args[2])
p.To.Type = obj.TYPE_MEM
p.To.Reg = arm.REG_R1
p.To.Offset = sz
p2 := gc.Prog(arm.ACMP)
p2.From.Type = obj.TYPE_REG
p2.From.Reg = gc.SSARegNum(v.Args[1])
p2.Reg = arm.REG_R1
p3 := gc.Prog(arm.ABLE)
p3.To.Type = obj.TYPE_BRANCH
gc.Patch(p3, p)
case ssa.OpARMLoweredMove:
// MOVW.P 4(R1), Rtmp
// MOVW.P Rtmp, 4(R2)
// CMP Rarg2, R1
// BLE -3(PC)
// arg2 is the address of the last element of src
// auxint is alignment
var sz int64
var mov obj.As
switch {
case v.AuxInt%4 == 0:
sz = 4
mov = arm.AMOVW
case v.AuxInt%2 == 0:
sz = 2
mov = arm.AMOVH
default:
sz = 1
mov = arm.AMOVB
}
p := gc.Prog(mov)
p.Scond = arm.C_PBIT
p.From.Type = obj.TYPE_MEM
p.From.Reg = arm.REG_R1
p.From.Offset = sz
p.To.Type = obj.TYPE_REG
p.To.Reg = arm.REGTMP
p2 := gc.Prog(mov)
p2.Scond = arm.C_PBIT
p2.From.Type = obj.TYPE_REG
p2.From.Reg = arm.REGTMP
p2.To.Type = obj.TYPE_MEM
p2.To.Reg = arm.REG_R2
p2.To.Offset = sz
p3 := gc.Prog(arm.ACMP)
p3.From.Type = obj.TYPE_REG
p3.From.Reg = gc.SSARegNum(v.Args[2])
p3.Reg = arm.REG_R1
p4 := gc.Prog(arm.ABLE)
p4.To.Type = obj.TYPE_BRANCH
gc.Patch(p4, p)
case ssa.OpVarDef:
gc.Gvardef(v.Aux.(*gc.Node))
case ssa.OpVarKill:
gc.Gvarkill(v.Aux.(*gc.Node))
case ssa.OpVarLive:
gc.Gvarlive(v.Aux.(*gc.Node))
case ssa.OpKeepAlive:
if !v.Args[0].Type.IsPtrShaped() {
v.Fatalf("keeping non-pointer alive %v", v.Args[0])
}
n, off := gc.AutoVar(v.Args[0])
if n == nil {
v.Fatalf("KeepLive with non-spilled value %s %s", v, v.Args[0])
}
if off != 0 {
v.Fatalf("KeepLive with non-zero offset spill location %s:%d", n, off)
}
gc.Gvarlive(n)
case ssa.OpARMEqual,
ssa.OpARMNotEqual,
ssa.OpARMLessThan,
ssa.OpARMLessEqual,
ssa.OpARMGreaterThan,
ssa.OpARMGreaterEqual,
ssa.OpARMLessThanU,
ssa.OpARMLessEqualU,
ssa.OpARMGreaterThanU,
ssa.OpARMGreaterEqualU:
// generate boolean values
// use conditional move
p := gc.Prog(arm.AMOVW)
p.From.Type = obj.TYPE_CONST
p.From.Offset = 0
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
p = gc.Prog(arm.AMOVW)
p.Scond = condBits[v.Op]
p.From.Type = obj.TYPE_CONST
p.From.Offset = 1
p.To.Type = obj.TYPE_REG
p.To.Reg = gc.SSARegNum(v)
case ssa.OpSelect0, ssa.OpSelect1:
// nothing to do
case ssa.OpARMLoweredGetClosurePtr:
// Closure pointer is R7 (arm.REGCTXT).
gc.CheckLoweredGetClosurePtr(v)
case ssa.OpARMFlagEQ,
ssa.OpARMFlagLT_ULT,
ssa.OpARMFlagLT_UGT,
ssa.OpARMFlagGT_ULT,
ssa.OpARMFlagGT_UGT:
v.Fatalf("Flag* ops should never make it to codegen %v", v.LongString())
case ssa.OpARMInvertFlags:
v.Fatalf("InvertFlags should never make it to codegen %v", v.LongString())
default:
v.Unimplementedf("genValue not implemented: %s", v.LongString())
}
}
