Esempio n. 1
0
// AddServer creates a server with the specified arguments and appends it to
// the TestCluster.
func (tc *TestCluster) AddServer(t testing.TB, serverArgs base.TestServerArgs) {
	serverArgs.Stopper = stop.NewStopper()
	s, conn, _ := serverutils.StartServer(t, serverArgs)
	tc.Servers = append(tc.Servers, s.(*server.TestServer))
	tc.Conns = append(tc.Conns, conn)
	tc.mu.Lock()
	tc.mu.serverStoppers = append(tc.mu.serverStoppers, serverArgs.Stopper)
	tc.mu.Unlock()
}
Esempio n. 2
0
// Start starts the TestServer by bootstrapping an in-memory store
// (defaults to maximum of 100M). The server is started, launching the
// node RPC server and all HTTP endpoints. Use the value of
// TestServer.ServingAddr() after Start() for client connections.
// Use TestServer.Stopper().Stop() to shutdown the server after the test
// completes.
func (ts *TestServer) Start(params base.TestServerArgs) error {
	if ts.Cfg == nil {
		panic("Cfg not set")
	}

	if params.Stopper == nil {
		params.Stopper = stop.NewStopper()
	}

	if !params.PartOfCluster {
		// Change the replication requirements so we don't get log spam about ranges
		// not being replicated enough.
		cfg := config.DefaultZoneConfig()
		cfg.NumReplicas = 1
		fn := config.TestingSetDefaultZoneConfig(cfg)
		params.Stopper.AddCloser(stop.CloserFn(fn))
	}

	// Needs to be called before NewServer to ensure resolvers are initialized.
	if err := ts.Cfg.InitNode(); err != nil {
		return err
	}

	var err error
	ts.Server, err = NewServer(*ts.Cfg, params.Stopper)
	if err != nil {
		return err
	}

	// Our context must be shared with our server.
	ts.Cfg = &ts.Server.cfg

	if err := ts.Server.Start(context.Background()); err != nil {
		return err
	}

	// If enabled, wait for initial splits to complete before returning control.
	// If initial splits do not complete, the server is stopped before
	// returning.
	if stk, ok := ts.cfg.TestingKnobs.Store.(*storage.StoreTestingKnobs); ok &&
		stk.DisableSplitQueue {
		return nil
	}
	if err := ts.WaitForInitialSplits(); err != nil {
		ts.Stop()
		return err
	}

	return nil
}
Esempio n. 3
0
// makeTestConfigtFromParams creates a Config from a TestServerParams.
func makeTestConfigFromParams(params base.TestServerArgs) Config {
	cfg := makeTestConfig()
	cfg.TestingKnobs = params.Knobs
	if params.JoinAddr != "" {
		cfg.JoinList = []string{params.JoinAddr}
	}
	cfg.Insecure = params.Insecure
	cfg.SocketFile = params.SocketFile
	cfg.RetryOptions = params.RetryOptions
	if params.MetricsSampleInterval != 0 {
		cfg.MetricsSampleInterval = params.MetricsSampleInterval
	}
	if params.RaftTickInterval != 0 {
		cfg.RaftTickInterval = params.RaftTickInterval
	}
	if params.RaftElectionTimeoutTicks != 0 {
		cfg.RaftElectionTimeoutTicks = params.RaftElectionTimeoutTicks
	}
	if knobs := params.Knobs.Store; knobs != nil {
		if mo := knobs.(*storage.StoreTestingKnobs).MaxOffset; mo != 0 {
			cfg.MaxOffset = mo
		}
	}
	if params.ScanInterval != 0 {
		cfg.ScanInterval = params.ScanInterval
	}
	if params.ScanMaxIdleTime != 0 {
		cfg.ScanMaxIdleTime = params.ScanMaxIdleTime
	}
	if params.SSLCA != "" {
		cfg.SSLCA = params.SSLCA
	}
	if params.SSLCert != "" {
		cfg.SSLCert = params.SSLCert
	}
	if params.SSLCertKey != "" {
		cfg.SSLCertKey = params.SSLCertKey
	}
	if params.TimeSeriesQueryWorkerMax != 0 {
		cfg.TimeSeriesServerConfig.QueryWorkerMax = params.TimeSeriesQueryWorkerMax
	}
	if params.DisableEventLog {
		cfg.EventLogEnabled = false
	}
	cfg.JoinList = []string{params.JoinAddr}
	if cfg.Insecure {
		// Whenever we can (i.e. in insecure mode), use IsolatedTestAddr
		// to prevent issues that can occur when running a test under
		// stress.
		cfg.Addr = util.IsolatedTestAddr.String()
		cfg.AdvertiseAddr = util.IsolatedTestAddr.String()
		cfg.HTTPAddr = util.IsolatedTestAddr.String()
	} else {
		cfg.Addr = util.TestAddr.String()
		cfg.AdvertiseAddr = util.TestAddr.String()
		cfg.HTTPAddr = util.TestAddr.String()
	}
	if params.Addr != "" {
		cfg.Addr = params.Addr
		cfg.AdvertiseAddr = params.Addr
	}

	// Ensure we have the correct number of engines. Add in-memory ones where
	// needed. There must be at least one store/engine.
	if len(params.StoreSpecs) == 0 {
		params.StoreSpecs = []base.StoreSpec{base.DefaultTestStoreSpec}
	}
	// Validate the store specs.
	for _, storeSpec := range params.StoreSpecs {
		if storeSpec.InMemory {
			if storeSpec.SizePercent > 0 {
				panic(fmt.Sprintf("test server does not yet support in memory stores based on percentage of total memory: %s", storeSpec))
			}
		} else {
			// TODO(bram): This will require some cleanup of on disk files.
			panic(fmt.Sprintf("test server does not yet support on disk stores: %s", storeSpec))
		}
	}
	// Copy over the store specs.
	cfg.Stores = base.StoreSpecList{Specs: params.StoreSpecs}
	if cfg.TestingKnobs.Store == nil {
		cfg.TestingKnobs.Store = &storage.StoreTestingKnobs{}
	}
	cfg.TestingKnobs.Store.(*storage.StoreTestingKnobs).SkipMinSizeCheck = true

	return cfg
}
Esempio n. 4
0
// StartTestCluster starts up a TestCluster made up of `nodes` in-memory testing
// servers.
// The cluster should be stopped using cluster.Stop().
func StartTestCluster(t testing.TB, nodes int, args base.TestClusterArgs) *TestCluster {
	if nodes < 1 {
		t.Fatal("invalid cluster size: ", nodes)
	}
	if args.ServerArgs.JoinAddr != "" {
		t.Fatal("can't specify a join addr when starting a cluster")
	}
	if args.ServerArgs.Stopper != nil {
		t.Fatal("can't set individual server stoppers when starting a cluster")
	}
	storeKnobs := args.ServerArgs.Knobs.Store
	if storeKnobs != nil &&
		(storeKnobs.(*storage.StoreTestingKnobs).DisableSplitQueue ||
			storeKnobs.(*storage.StoreTestingKnobs).DisableReplicateQueue) {
		t.Fatal("can't disable an individual server's queues when starting a cluster; " +
			"the cluster controls replication")
	}

	switch args.ReplicationMode {
	case base.ReplicationAuto:
	case base.ReplicationManual:
		if args.ServerArgs.Knobs.Store == nil {
			args.ServerArgs.Knobs.Store = &storage.StoreTestingKnobs{}
		}
		storeKnobs := args.ServerArgs.Knobs.Store.(*storage.StoreTestingKnobs)
		storeKnobs.DisableSplitQueue = true
		storeKnobs.DisableReplicateQueue = true
	default:
		t.Fatal("unexpected replication mode")
	}

	tc := &TestCluster{}
	tc.stopper = stop.NewStopper()

	for i := 0; i < nodes; i++ {
		var serverArgs base.TestServerArgs
		if perNodeServerArgs, ok := args.ServerArgsPerNode[i]; ok {
			serverArgs = perNodeServerArgs
		} else {
			serverArgs = args.ServerArgs
		}
		serverArgs.PartOfCluster = true
		if i > 0 {
			serverArgs.JoinAddr = tc.Servers[0].ServingAddr()
		}
		tc.AddServer(t, serverArgs)
	}

	// Create a closer that will stop the individual server stoppers when the
	// cluster stopper is stopped.
	tc.stopper.AddCloser(stop.CloserFn(tc.stopServers))

	tc.WaitForStores(t, tc.Servers[0].Gossip())

	// TODO(peter): We should replace the hardcoded 3 with the default ZoneConfig
	// replication factor.
	if args.ReplicationMode == base.ReplicationAuto && nodes >= 3 {
		if err := tc.waitForFullReplication(); err != nil {
			t.Fatal(err)
		}
	}
	return tc
}