// startUser simulates a stream of user events until the stopper
// indicates it's time to exit.
func startUser(ctx Context, stopper *stop.Stopper) {
for {
userID := 1 + int(rand.ExpFloat64()/rate)
op := randomOp()
if err := stopper.RunTask(func() {
err := runUserOp(ctx, userID, op.typ)
stats.Lock()
_ = stats.hist.RecordValue(int64(userID))
stats.totalOps++
stats.opCounts[op.typ]++
switch {
case err == errNoUser:
stats.noUserOps++
case err == errNoPhoto:
stats.noPhotoOps++
case err != nil:
stats.failedOps++
log.Printf("failed to run %s op for %d: %s", op.name, userID, err)
}
stats.Unlock()
}); err != nil {
return
}
}
}
// processLoop processes the entries in the queue until the provided
// stopper signals exit.
//
// TODO(spencer): current load should factor into replica processing timer.
func (bq *baseQueue) processLoop(clock *hlc.Clock, stopper *stop.Stopper) {
stopper.RunWorker(func() {
ctx := bq.AnnotateCtx(context.Background())
defer func() {
bq.mu.Lock()
bq.mu.stopped = true
bq.mu.Unlock()
bq.AmbientContext.FinishEventLog()
}()
// nextTime is initially nil; we don't start any timers until the queue
// becomes non-empty.
var nextTime <-chan time.Time
immediately := make(chan time.Time)
close(immediately)
for {
select {
// Exit on stopper.
case <-stopper.ShouldStop():
return
// Incoming signal sets the next time to process if there were previously
// no replicas in the queue.
case <-bq.incoming:
if nextTime == nil {
// When a replica is added, wake up immediately. This is mainly
// to facilitate testing without unnecessary sleeps.
nextTime = immediately
// In case we're in a test, still block on the impl.
bq.impl.timer()
}
// Process replicas as the timer expires.
case <-nextTime:
repl := bq.pop()
if repl != nil {
if stopper.RunTask(func() {
annotatedCtx := repl.AnnotateCtx(ctx)
if err := bq.processReplica(annotatedCtx, repl, clock); err != nil {
// Maybe add failing replica to purgatory if the queue supports it.
bq.maybeAddToPurgatory(annotatedCtx, repl, err, clock, stopper)
}
}) != nil {
return
}
}
if bq.Length() == 0 {
nextTime = nil
} else {
nextTime = time.After(bq.impl.timer())
}
}
}
})
}
// scanLoop loops endlessly, scanning through replicas available via
// the replica set, or until the scanner is stopped. The iteration
// is paced to complete a full scan in approximately the scan interval.
func (rs *replicaScanner) scanLoop(clock *hlc.Clock, stopper *stop.Stopper) {
stopper.RunWorker(func() {
ctx := rs.AnnotateCtx(context.Background())
start := timeutil.Now()
// waitTimer is reset in each call to waitAndProcess.
defer rs.waitTimer.Stop()
for {
if rs.GetDisabled() {
if done := rs.waitEnabled(stopper); done {
return
}
continue
}
var shouldStop bool
count := 0
rs.replicas.Visit(func(repl *Replica) bool {
count++
shouldStop = rs.waitAndProcess(ctx, start, clock, stopper, repl)
return !shouldStop
})
if count == 0 {
// No replicas processed, just wait.
shouldStop = rs.waitAndProcess(ctx, start, clock, stopper, nil)
}
shouldStop = shouldStop || nil != stopper.RunTask(func() {
// Increment iteration count.
rs.mu.Lock()
defer rs.mu.Unlock()
rs.mu.scanCount++
rs.mu.total += timeutil.Since(start)
if log.V(6) {
log.Infof(ctx, "reset replica scan iteration")
}
// Reset iteration and start time.
start = timeutil.Now()
})
if shouldStop {
return
}
}
})
}
// maybeAddToPurgatory possibly adds the specified replica to the
// purgatory queue, which holds replicas which have failed
// processing. To be added, the failing error must implement
// purgatoryError and the queue implementation must have its own
// mechanism for signaling re-processing of replicas held in
// purgatory.
func (bq *baseQueue) maybeAddToPurgatory(
ctx context.Context, repl *Replica, triggeringErr error, clock *hlc.Clock, stopper *stop.Stopper,
) {
// Increment failures metric here to capture all error returns from
// process().
bq.failures.Inc(1)
// Check whether the failure is a purgatory error and whether the queue supports it.
if _, ok := triggeringErr.(purgatoryError); !ok || bq.impl.purgatoryChan() == nil {
log.Error(ctx, triggeringErr)
return
}
bq.mu.Lock()
defer bq.mu.Unlock()
// First, check whether the replica has already been re-added to queue.
if _, ok := bq.mu.replicas[repl.RangeID]; ok {
return
}
log.Error(ctx, errors.Wrap(triggeringErr, "purgatory"))
item := &replicaItem{value: repl.RangeID}
bq.mu.replicas[repl.RangeID] = item
defer func() {
bq.purgatory.Update(int64(len(bq.mu.purgatory)))
}()
// If purgatory already exists, just add to the map and we're done.
if bq.mu.purgatory != nil {
bq.mu.purgatory[repl.RangeID] = triggeringErr
return
}
// Otherwise, create purgatory and start processing.
bq.mu.purgatory = map[roachpb.RangeID]error{
repl.RangeID: triggeringErr,
}
stopper.RunWorker(func() {
ctx := bq.AnnotateCtx(context.Background())
ticker := time.NewTicker(purgatoryReportInterval)
for {
select {
case <-bq.impl.purgatoryChan():
// Remove all items from purgatory into a copied slice.
bq.mu.Lock()
ranges := make([]roachpb.RangeID, 0, len(bq.mu.purgatory))
for rangeID := range bq.mu.purgatory {
item := bq.mu.replicas[rangeID]
ranges = append(ranges, item.value)
bq.remove(item)
}
bq.mu.Unlock()
for _, id := range ranges {
repl, err := bq.store.GetReplica(id)
if err != nil {
log.Errorf(ctx, "range %s no longer exists on store: %s", id, err)
return
}
if stopper.RunTask(func() {
annotatedCtx := repl.AnnotateCtx(ctx)
if err := bq.processReplica(annotatedCtx, repl, clock); err != nil {
bq.maybeAddToPurgatory(annotatedCtx, repl, err, clock, stopper)
}
}) != nil {
return
}
}
bq.mu.Lock()
if len(bq.mu.purgatory) == 0 {
log.Infof(ctx, "purgatory is now empty")
bq.mu.purgatory = nil
bq.mu.Unlock()
return
}
bq.mu.Unlock()
case <-ticker.C:
// Report purgatory status.
bq.mu.Lock()
errMap := map[string]int{}
for _, err := range bq.mu.purgatory {
errMap[err.Error()]++
}
bq.mu.Unlock()
for errStr, count := range errMap {
log.Errorf(ctx, "%d replicas failing with %q", count, errStr)
}
case <-stopper.ShouldStop():
return
}
}
})
}
