// maybeAcceptTransaction is the internal function which implements the public
// MaybeAcceptTransaction. See the comment for MaybeAcceptTransaction for
// more details.
//
// This function MUST be called with the mempool lock held (for writes).
func (mp *txMemPool) maybeAcceptTransaction(tx *coinutil.Tx, isNew, rateLimit bool) ([]*wire.ShaHash, error) {
txHash := tx.Sha()
// Don't accept the transaction if it already exists in the pool. This
// applies to orphan transactions as well. This check is intended to
// be a quick check to weed out duplicates.
if mp.haveTransaction(txHash) {
str := fmt.Sprintf("already have transaction %v", txHash)
return nil, txRuleError(wire.RejectDuplicate, str)
}
// Perform preliminary sanity checks on the transaction. This makes
// use of btcchain which contains the invariant rules for what
// transactions are allowed into blocks.
err := blockchain.CheckTransactionSanity(tx)
if err != nil {
if cerr, ok := err.(blockchain.RuleError); ok {
return nil, chainRuleError(cerr)
}
return nil, err
}
// A standalone transaction must not be a coinbase transaction.
if blockchain.IsCoinBase(tx) {
str := fmt.Sprintf("transaction %v is an individual coinbase",
txHash)
return nil, txRuleError(wire.RejectInvalid, str)
}
// Don't accept transactions with a lock time after the maximum int32
// value for now. This is an artifact of older bitcoind clients which
// treated this field as an int32 and would treat anything larger
// incorrectly (as negative).
if tx.MsgTx().LockTime > math.MaxInt32 {
str := fmt.Sprintf("transaction %v has a lock time after "+
"2038 which is not accepted yet", txHash)
return nil, txRuleError(wire.RejectNonstandard, str)
}
// Get the current height of the main chain. A standalone transaction
// will be mined into the next block at best, so it's height is at least
// one more than the current height.
_, curHeight, err := mp.cfg.NewestSha()
if err != nil {
// This is an unexpected error so don't turn it into a rule
// error.
return nil, err
}
nextBlockHeight := curHeight + 1
// Don't allow non-standard transactions if the network parameters
// forbid their relaying.
if !activeNetParams.RelayNonStdTxs {
err := checkTransactionStandard(tx, nextBlockHeight,
mp.cfg.TimeSource, mp.cfg.MinRelayTxFee)
if err != nil {
// Attempt to extract a reject code from the error so
// it can be retained. When not possible, fall back to
// a non standard error.
rejectCode, found := extractRejectCode(err)
if !found {
rejectCode = wire.RejectNonstandard
}
str := fmt.Sprintf("transaction %v is not standard: %v",
txHash, err)
return nil, txRuleError(rejectCode, str)
}
}
// The transaction may not use any of the same outputs as other
// transactions already in the pool as that would ultimately result in a
// double spend. This check is intended to be quick and therefore only
// detects double spends within the transaction pool itself. The
// transaction could still be double spending coins from the main chain
// at this point. There is a more in-depth check that happens later
// after fetching the referenced transaction inputs from the main chain
// which examines the actual spend data and prevents double spends.
err = mp.checkPoolDoubleSpend(tx)
if err != nil {
return nil, err
}
// Fetch all of the transactions referenced by the inputs to this
// transaction. This function also attempts to fetch the transaction
// itself to be used for detecting a duplicate transaction without
// needing to do a separate lookup.
txStore, err := mp.fetchInputTransactions(tx, false)
if err != nil {
if cerr, ok := err.(blockchain.RuleError); ok {
return nil, chainRuleError(cerr)
}
return nil, err
}
// Don't allow the transaction if it exists in the main chain and is not
// not already fully spent.
if txD, exists := txStore[*txHash]; exists && txD.Err == nil {
for _, isOutputSpent := range txD.Spent {
if !isOutputSpent {
return nil, txRuleError(wire.RejectDuplicate,
"transaction already exists")
}
}
}
delete(txStore, *txHash)
// Transaction is an orphan if any of the referenced input transactions
// don't exist. Adding orphans to the orphan pool is not handled by
// this function, and the caller should use maybeAddOrphan if this
// behavior is desired.
var missingParents []*wire.ShaHash
for _, txD := range txStore {
if txD.Err == database.ErrTxShaMissing {
missingParents = append(missingParents, txD.Hash)
}
}
if len(missingParents) > 0 {
return missingParents, nil
}
// Perform several checks on the transaction inputs using the invariant
// rules in btcchain for what transactions are allowed into blocks.
// Also returns the fees associated with the transaction which will be
// used later.
txFee, err := blockchain.CheckTransactionInputs(tx, nextBlockHeight, txStore)
if err != nil {
if cerr, ok := err.(blockchain.RuleError); ok {
return nil, chainRuleError(cerr)
}
return nil, err
}
// Don't allow transactions with non-standard inputs if the network
// parameters forbid their relaying.
if !activeNetParams.RelayNonStdTxs {
err := checkInputsStandard(tx, txStore)
if err != nil {
// Attempt to extract a reject code from the error so
// it can be retained. When not possible, fall back to
// a non standard error.
rejectCode, found := extractRejectCode(err)
if !found {
rejectCode = wire.RejectNonstandard
}
str := fmt.Sprintf("transaction %v has a non-standard "+
"input: %v", txHash, err)
return nil, txRuleError(rejectCode, str)
}
}
// NOTE: if you modify this code to accept non-standard transactions,
// you should add code here to check that the transaction does a
// reasonable number of ECDSA signature verifications.
// Don't allow transactions with an excessive number of signature
// operations which would result in making it impossible to mine. Since
// the coinbase address itself can contain signature operations, the
// maximum allowed signature operations per transaction is less than
// the maximum allowed signature operations per block.
numSigOps, err := blockchain.CountP2SHSigOps(tx, false, txStore)
if err != nil {
if cerr, ok := err.(blockchain.RuleError); ok {
return nil, chainRuleError(cerr)
}
return nil, err
}
numSigOps += blockchain.CountSigOps(tx)
if numSigOps > maxSigOpsPerTx {
str := fmt.Sprintf("transaction %v has too many sigops: %d > %d",
txHash, numSigOps, maxSigOpsPerTx)
return nil, txRuleError(wire.RejectNonstandard, str)
}
// Don't allow transactions with fees too low to get into a mined block.
//
// Most miners allow a free transaction area in blocks they mine to go
// alongside the area used for high-priority transactions as well as
// transactions with fees. A transaction size of up to 1000 bytes is
// considered safe to go into this section. Further, the minimum fee
// calculated below on its own would encourage several small
// transactions to avoid fees rather than one single larger transaction
// which is more desirable. Therefore, as long as the size of the
// transaction does not exceeed 1000 less than the reserved space for
// high-priority transactions, don't require a fee for it.
serializedSize := int64(tx.MsgTx().SerializeSize())
minFee := calcMinRequiredTxRelayFee(serializedSize, mp.cfg.MinRelayTxFee)
if serializedSize >= (defaultBlockPrioritySize-1000) && txFee < minFee {
str := fmt.Sprintf("transaction %v has %d fees which is under "+
"the required amount of %d", txHash, txFee,
minFee)
return nil, txRuleError(wire.RejectInsufficientFee, str)
}
// Require that free transactions have sufficient priority to be mined
// in the next block. Transactions which are being added back to the
// memory pool from blocks that have been disconnected during a reorg
// are exempted.
if isNew && !mp.cfg.DisableRelayPriority && txFee < minFee {
currentPriority := calcPriority(tx.MsgTx(), txStore,
nextBlockHeight)
if currentPriority <= minHighPriority {
str := fmt.Sprintf("transaction %v has insufficient "+
"priority (%g <= %g)", txHash,
currentPriority, minHighPriority)
return nil, txRuleError(wire.RejectInsufficientFee, str)
}
}
// Free-to-relay transactions are rate limited here to prevent
// penny-flooding with tiny transactions as a form of attack.
if rateLimit && txFee < minFee {
nowUnix := time.Now().Unix()
// we decay passed data with an exponentially decaying ~10
// minutes window - matches bitcoind handling.
mp.pennyTotal *= math.Pow(1.0-1.0/600.0,
float64(nowUnix-mp.lastPennyUnix))
mp.lastPennyUnix = nowUnix
// Are we still over the limit?
if mp.pennyTotal >= mp.cfg.FreeTxRelayLimit*10*1000 {
str := fmt.Sprintf("transaction %v has been rejected "+
"by the rate limiter due to low fees", txHash)
return nil, txRuleError(wire.RejectInsufficientFee, str)
}
oldTotal := mp.pennyTotal
mp.pennyTotal += float64(serializedSize)
txmpLog.Tracef("rate limit: curTotal %v, nextTotal: %v, "+
"limit %v", oldTotal, mp.pennyTotal,
mp.cfg.FreeTxRelayLimit*10*1000)
}
// Verify crypto signatures for each input and reject the transaction if
// any don't verify.
err = blockchain.ValidateTransactionScripts(tx, txStore,
txscript.StandardVerifyFlags, mp.cfg.SigCache)
if err != nil {
if cerr, ok := err.(blockchain.RuleError); ok {
return nil, chainRuleError(cerr)
}
return nil, err
}
// Add to transaction pool.
mp.addTransaction(txStore, tx, curHeight, txFee)
txmpLog.Debugf("Accepted transaction %v (pool size: %v)", txHash,
len(mp.pool))
return nil, nil
}
// NewBlockTemplate returns a new block template that is ready to be solved
// using the transactions from the passed transaction source pool and a coinbase
// that either pays to the passed address if it is not nil, or a coinbase that
// is redeemable by anyone if the passed address is nil. The nil address
// functionality is useful since there are cases such as the getblocktemplate
// RPC where external mining software is responsible for creating their own
// coinbase which will replace the one generated for the block template. Thus
// the need to have configured address can be avoided.
//
// The transactions selected and included are prioritized according to several
// factors. First, each transaction has a priority calculated based on its
// value, age of inputs, and size. Transactions which consist of larger
// amounts, older inputs, and small sizes have the highest priority. Second, a
// fee per kilobyte is calculated for each transaction. Transactions with a
// higher fee per kilobyte are preferred. Finally, the block generation related
// policy settings are all taken into account.
//
// Transactions which only spend outputs from other transactions already in the
// block chain are immediately added to a priority queue which either
// prioritizes based on the priority (then fee per kilobyte) or the fee per
// kilobyte (then priority) depending on whether or not the BlockPrioritySize
// policy setting allots space for high-priority transactions. Transactions
// which spend outputs from other transactions in the source pool are added to a
// dependency map so they can be added to the priority queue once the
// transactions they depend on have been included.
//
// Once the high-priority area (if configured) has been filled with
// transactions, or the priority falls below what is considered high-priority,
// the priority queue is updated to prioritize by fees per kilobyte (then
// priority).
//
// When the fees per kilobyte drop below the TxMinFreeFee policy setting, the
// transaction will be skipped unless the BlockMinSize policy setting is
// nonzero, in which case the block will be filled with the low-fee/free
// transactions until the block size reaches that minimum size.
//
// Any transactions which would cause the block to exceed the BlockMaxSize
// policy setting, exceed the maximum allowed signature operations per block, or
// otherwise cause the block to be invalid are skipped.
//
// Given the above, a block generated by this function is of the following form:
//
// ----------------------------------- -- --
// | Coinbase Transaction | | |
// |-----------------------------------| | |
// | | | | ----- policy.BlockPrioritySize
// | High-priority Transactions | | |
// | | | |
// |-----------------------------------| | --
// | | |
// | | |
// | | |--- policy.BlockMaxSize
// | Transactions prioritized by fee | |
// | until <= policy.TxMinFreeFee | |
// | | |
// | | |
// | | |
// |-----------------------------------| |
// | Low-fee/Non high-priority (free) | |
// | transactions (while block size | |
// | <= policy.BlockMinSize) | |
// ----------------------------------- --
func NewBlockTemplate(policy *mining.Policy, server *server, payToAddress coinutil.Address) (*BlockTemplate, error) {
var txSource mining.TxSource = server.txMemPool
blockManager := server.blockManager
timeSource := server.timeSource
chainState := &blockManager.chainState
// Extend the most recently known best block.
chainState.Lock()
prevHash := chainState.newestHash
nextBlockHeight := chainState.newestHeight + 1
chainState.Unlock()
// Create a standard coinbase transaction paying to the provided
// address. NOTE: The coinbase value will be updated to include the
// fees from the selected transactions later after they have actually
// been selected. It is created here to detect any errors early
// before potentially doing a lot of work below. The extra nonce helps
// ensure the transaction is not a duplicate transaction (paying the
// same value to the same public key address would otherwise be an
// identical transaction for block version 1).
extraNonce := uint64(0)
coinbaseScript, err := standardCoinbaseScript(nextBlockHeight, extraNonce)
if err != nil {
return nil, err
}
coinbaseTx, err := createCoinbaseTx(coinbaseScript, nextBlockHeight,
payToAddress)
if err != nil {
return nil, err
}
numCoinbaseSigOps := int64(blockchain.CountSigOps(coinbaseTx))
// Get the current source transactions and create a priority queue to
// hold the transactions which are ready for inclusion into a block
// along with some priority related and fee metadata. Reserve the same
// number of items that are available for the priority queue. Also,
// choose the initial sort order for the priority queue based on whether
// or not there is an area allocated for high-priority transactions.
sourceTxns := txSource.MiningDescs()
sortedByFee := policy.BlockPrioritySize == 0
priorityQueue := newTxPriorityQueue(len(sourceTxns), sortedByFee)
// Create a slice to hold the transactions to be included in the
// generated block with reserved space. Also create a transaction
// store to house all of the input transactions so multiple lookups
// can be avoided.
blockTxns := make([]*coinutil.Tx, 0, len(sourceTxns))
blockTxns = append(blockTxns, coinbaseTx)
blockTxStore := make(blockchain.TxStore)
// dependers is used to track transactions which depend on another
// transaction in the source pool. This, in conjunction with the
// dependsOn map kept with each dependent transaction helps quickly
// determine which dependent transactions are now eligible for inclusion
// in the block once each transaction has been included.
dependers := make(map[wire.ShaHash]*list.List)
// Create slices to hold the fees and number of signature operations
// for each of the selected transactions and add an entry for the
// coinbase. This allows the code below to simply append details about
// a transaction as it is selected for inclusion in the final block.
// However, since the total fees aren't known yet, use a dummy value for
// the coinbase fee which will be updated later.
txFees := make([]int64, 0, len(sourceTxns))
txSigOpCounts := make([]int64, 0, len(sourceTxns))
txFees = append(txFees, -1) // Updated once known
txSigOpCounts = append(txSigOpCounts, numCoinbaseSigOps)
minrLog.Debugf("Considering %d transactions for inclusion to new block",
len(sourceTxns))
mempoolLoop:
for _, txDesc := range sourceTxns {
// A block can't have more than one coinbase or contain
// non-finalized transactions.
tx := txDesc.Tx
if blockchain.IsCoinBase(tx) {
minrLog.Tracef("Skipping coinbase tx %s", tx.Sha())
continue
}
if !blockchain.IsFinalizedTransaction(tx, nextBlockHeight,
timeSource.AdjustedTime()) {
minrLog.Tracef("Skipping non-finalized tx %s", tx.Sha())
continue
}
// Fetch all of the transactions referenced by the inputs to
// this transaction. NOTE: This intentionally does not fetch
// inputs from the mempool since a transaction which depends on
// other transactions in the mempool must come after those
// dependencies in the final generated block.
txStore, err := blockManager.FetchTransactionStore(tx)
if err != nil {
minrLog.Warnf("Unable to fetch transaction store for "+
"tx %s: %v", tx.Sha(), err)
continue
}
// Setup dependencies for any transactions which reference
// other transactions in the mempool so they can be properly
// ordered below.
prioItem := &txPrioItem{tx: tx}
for _, txIn := range tx.MsgTx().TxIn {
originHash := &txIn.PreviousOutPoint.Hash
originIndex := txIn.PreviousOutPoint.Index
txData, exists := txStore[*originHash]
if !exists || txData.Err != nil || txData.Tx == nil {
if !txSource.HaveTransaction(originHash) {
minrLog.Tracef("Skipping tx %s because "+
"it references tx %s which is "+
"not available", tx.Sha,
originHash)
continue mempoolLoop
}
// The transaction is referencing another
// transaction in the source pool, so setup an
// ordering dependency.
depList, exists := dependers[*originHash]
if !exists {
depList = list.New()
dependers[*originHash] = depList
}
depList.PushBack(prioItem)
if prioItem.dependsOn == nil {
prioItem.dependsOn = make(
map[wire.ShaHash]struct{})
}
prioItem.dependsOn[*originHash] = struct{}{}
// Skip the check below. We already know the
// referenced transaction is available.
continue
}
// Ensure the output index in the referenced transaction
// is available.
msgTx := txData.Tx.MsgTx()
if originIndex > uint32(len(msgTx.TxOut)) {
minrLog.Tracef("Skipping tx %s because "+
"it references output %d of tx %s "+
"which is out of bounds", tx.Sha,
originIndex, originHash)
continue mempoolLoop
}
}
// Calculate the final transaction priority using the input
// value age sum as well as the adjusted transaction size. The
// formula is: sum(inputValue * inputAge) / adjustedTxSize
prioItem.priority = calcPriority(tx.MsgTx(), txStore, nextBlockHeight)
// Calculate the fee in Satoshi/kB.
txSize := tx.MsgTx().SerializeSize()
prioItem.feePerKB = (txDesc.Fee * 1000) / int64(txSize)
prioItem.fee = txDesc.Fee
// Add the transaction to the priority queue to mark it ready
// for inclusion in the block unless it has dependencies.
if prioItem.dependsOn == nil {
heap.Push(priorityQueue, prioItem)
}
// Merge the store which contains all of the input transactions
// for this transaction into the input transaction store. This
// allows the code below to avoid a second lookup.
mergeTxStore(blockTxStore, txStore)
}
minrLog.Tracef("Priority queue len %d, dependers len %d",
priorityQueue.Len(), len(dependers))
// The starting block size is the size of the block header plus the max
// possible transaction count size, plus the size of the coinbase
// transaction.
blockSize := blockHeaderOverhead + uint32(coinbaseTx.MsgTx().SerializeSize())
blockSigOps := numCoinbaseSigOps
totalFees := int64(0)
// Choose which transactions make it into the block.
for priorityQueue.Len() > 0 {
// Grab the highest priority (or highest fee per kilobyte
// depending on the sort order) transaction.
prioItem := heap.Pop(priorityQueue).(*txPrioItem)
tx := prioItem.tx
// Grab the list of transactions which depend on this one (if
// any) and remove the entry for this transaction as it will
// either be included or skipped, but in either case the deps
// are no longer needed.
deps := dependers[*tx.Sha()]
delete(dependers, *tx.Sha())
// Enforce maximum block size. Also check for overflow.
txSize := uint32(tx.MsgTx().SerializeSize())
blockPlusTxSize := blockSize + txSize
if blockPlusTxSize < blockSize || blockPlusTxSize >= policy.BlockMaxSize {
minrLog.Tracef("Skipping tx %s because it would exceed "+
"the max block size", tx.Sha())
logSkippedDeps(tx, deps)
continue
}
// Enforce maximum signature operations per block. Also check
// for overflow.
numSigOps := int64(blockchain.CountSigOps(tx))
if blockSigOps+numSigOps < blockSigOps ||
blockSigOps+numSigOps > blockchain.MaxSigOpsPerBlock {
minrLog.Tracef("Skipping tx %s because it would "+
"exceed the maximum sigops per block", tx.Sha())
logSkippedDeps(tx, deps)
continue
}
numP2SHSigOps, err := blockchain.CountP2SHSigOps(tx, false,
blockTxStore)
if err != nil {
minrLog.Tracef("Skipping tx %s due to error in "+
"CountP2SHSigOps: %v", tx.Sha(), err)
logSkippedDeps(tx, deps)
continue
}
numSigOps += int64(numP2SHSigOps)
if blockSigOps+numSigOps < blockSigOps ||
blockSigOps+numSigOps > blockchain.MaxSigOpsPerBlock {
minrLog.Tracef("Skipping tx %s because it would "+
"exceed the maximum sigops per block (p2sh)",
tx.Sha())
logSkippedDeps(tx, deps)
continue
}
// Skip free transactions once the block is larger than the
// minimum block size.
if sortedByFee &&
prioItem.feePerKB < int64(policy.TxMinFreeFee) &&
blockPlusTxSize >= policy.BlockMinSize {
minrLog.Tracef("Skipping tx %s with feePerKB %.2f "+
"< TxMinFreeFee %d and block size %d >= "+
"minBlockSize %d", tx.Sha(), prioItem.feePerKB,
policy.TxMinFreeFee, blockPlusTxSize,
policy.BlockMinSize)
logSkippedDeps(tx, deps)
continue
}
// Prioritize by fee per kilobyte once the block is larger than
// the priority size or there are no more high-priority
// transactions.
if !sortedByFee && (blockPlusTxSize >= policy.BlockPrioritySize ||
prioItem.priority <= minHighPriority) {
minrLog.Tracef("Switching to sort by fees per "+
"kilobyte blockSize %d >= BlockPrioritySize "+
"%d || priority %.2f <= minHighPriority %.2f",
blockPlusTxSize, policy.BlockPrioritySize,
prioItem.priority, minHighPriority)
sortedByFee = true
priorityQueue.SetLessFunc(txPQByFee)
// Put the transaction back into the priority queue and
// skip it so it is re-priortized by fees if it won't
// fit into the high-priority section or the priority is
// too low. Otherwise this transaction will be the
// final one in the high-priority section, so just fall
// though to the code below so it is added now.
if blockPlusTxSize > policy.BlockPrioritySize ||
prioItem.priority < minHighPriority {
heap.Push(priorityQueue, prioItem)
continue
}
}
// Ensure the transaction inputs pass all of the necessary
// preconditions before allowing it to be added to the block.
_, err = blockchain.CheckTransactionInputs(tx, nextBlockHeight,
blockTxStore)
if err != nil {
minrLog.Tracef("Skipping tx %s due to error in "+
"CheckTransactionInputs: %v", tx.Sha(), err)
logSkippedDeps(tx, deps)
continue
}
err = blockchain.ValidateTransactionScripts(tx, blockTxStore,
txscript.StandardVerifyFlags, server.sigCache)
if err != nil {
minrLog.Tracef("Skipping tx %s due to error in "+
"ValidateTransactionScripts: %v", tx.Sha(), err)
logSkippedDeps(tx, deps)
continue
}
// Spend the transaction inputs in the block transaction store
// and add an entry for it to ensure any transactions which
// reference this one have it available as an input and can
// ensure they aren't double spending.
spendTransaction(blockTxStore, tx, nextBlockHeight)
// Add the transaction to the block, increment counters, and
// save the fees and signature operation counts to the block
// template.
blockTxns = append(blockTxns, tx)
blockSize += txSize
blockSigOps += numSigOps
totalFees += prioItem.fee
txFees = append(txFees, prioItem.fee)
txSigOpCounts = append(txSigOpCounts, numSigOps)
minrLog.Tracef("Adding tx %s (priority %.2f, feePerKB %.2f)",
prioItem.tx.Sha(), prioItem.priority, prioItem.feePerKB)
// Add transactions which depend on this one (and also do not
// have any other unsatisified dependencies) to the priority
// queue.
if deps != nil {
for e := deps.Front(); e != nil; e = e.Next() {
// Add the transaction to the priority queue if
// there are no more dependencies after this
// one.
item := e.Value.(*txPrioItem)
delete(item.dependsOn, *tx.Sha())
if len(item.dependsOn) == 0 {
heap.Push(priorityQueue, item)
}
}
}
}
// Now that the actual transactions have been selected, update the
// block size for the real transaction count and coinbase value with
// the total fees accordingly.
blockSize -= wire.MaxVarIntPayload -
uint32(wire.VarIntSerializeSize(uint64(len(blockTxns))))
coinbaseTx.MsgTx().TxOut[0].Value += totalFees
txFees[0] = -totalFees
// Calculate the required difficulty for the block. The timestamp
// is potentially adjusted to ensure it comes after the median time of
// the last several blocks per the chain consensus rules.
ts, err := medianAdjustedTime(chainState, timeSource)
if err != nil {
return nil, err
}
requiredDifficulty, err := blockManager.CalcNextRequiredDifficulty(ts)
if err != nil {
return nil, err
}
// Create a new block ready to be solved.
merkles := blockchain.BuildMerkleTreeStore(blockTxns)
var msgBlock wire.MsgBlock
msgBlock.Header = wire.BlockHeader{
Version: generatedBlockVersion,
PrevBlock: *prevHash,
MerkleRoot: *merkles[len(merkles)-1],
Timestamp: ts,
Bits: requiredDifficulty,
}
for _, tx := range blockTxns {
if err := msgBlock.AddTransaction(tx.MsgTx()); err != nil {
return nil, err
}
}
// Finally, perform a full check on the created block against the chain
// consensus rules to ensure it properly connects to the current best
// chain with no issues.
block := coinutil.NewBlock(&msgBlock)
block.SetHeight(nextBlockHeight)
if err := blockManager.CheckConnectBlock(block); err != nil {
return nil, err
}
minrLog.Debugf("Created new block template (%d transactions, %d in "+
"fees, %d signature operations, %d bytes, target difficulty "+
"%064x)", len(msgBlock.Transactions), totalFees, blockSigOps,
blockSize, blockchain.CompactToBig(msgBlock.Header.Bits))
return &BlockTemplate{
block: &msgBlock,
fees: txFees,
sigOpCounts: txSigOpCounts,
height: nextBlockHeight,
validPayAddress: payToAddress != nil,
}, nil
}