Esempio n. 1
0
//var count  int = 0
func (r *Radio) Get(ctx *jas.Context) {
	ctx.Data = "radio response"
	r.count = r.count + 1
	if r.count > 2 {
		ctx.Data = "more response"
	}
}
Esempio n. 2
0
// GetAll dumps the entire database of nodes, including cached
// ones. If the form value `since` is supplied with a valid RFC3339
// timestamp, only nodes updated or cached more recently than that
// will be dumped. If 'geojson' is present, then the "data" field
// contains the dump in GeoJSON compliant form.
func (*Api) GetAll(ctx *jas.Context) {
	// We must invoke ParseForm() so that we can access ctx.Form.
	ctx.ParseForm()

	// In order to access this at the end, we need to declare nodes
	// here, so the results from the dump don't go out of scope.
	var nodes []*Node
	var err error

	// If the form value "since" was supplied, we will be doing a dump
	// based on update/retrieve time.
	if tstring := ctx.FormValue("since"); len(tstring) > 0 {
		var t time.Time
		t, err = time.Parse(time.RFC3339, tstring)
		if err != nil {
			ctx.Data = err.Error()
			ctx.Error = jas.NewRequestError("invalidTime")
			return
		}

		// Now, perform the time-based dump. Errors will be handled
		// outside the if block.
		nodes, err = Db.DumpChanges(t)
	} else {
		// If there was no "since," provide a simple full-database
		// dump.
		nodes, err = Db.DumpNodes()
	}

	// Handle any database errors here.
	if err != nil {
		ctx.Error = jas.NewInternalError(err)
		l.Err(err)
		return
	}

	// If the form value 'geojson' is included, dump in GeoJSON
	// form. Otherwise, just dump with normal marhshalling.
	if _, ok := ctx.Form["geojson"]; ok {
		ctx.Data = FeatureCollectionNodes(nodes)
	} else {
		mappedNodes, err := Db.CacheFormatNodes(nodes)
		if err != nil {
			ctx.Error = jas.NewInternalError(err)
			l.Err(err)
			return
		}
		ctx.Data = mappedNodes
	}
}
Esempio n. 3
0
func (*Hello) GetTuling(ctx *jas.Context) {
	var req TulingRequest
	req.Info = "新闻"
	resp := DoTulingQuery(req)
	resp.Print()
	ctx.Data = "success"
}
Esempio n. 4
0
// GetNode retrieves a single node from the database, removes
// sensitive data (such as an email address) and sets ctx.Data to it.
func (*Api) GetNode(ctx *jas.Context) {
	ip := IP(net.ParseIP(ctx.RequireString("address")))
	if ip == nil {
		// If this is encountered, the address was incorrectly
		// formatted.
		ctx.Error = jas.NewRequestError("addressInvalid")
		return
	}
	node, err := Db.GetNode(ip)
	if err != nil {
		// If there has been a database error, log it and report the
		// failure.
		ctx.Error = jas.NewInternalError(err)
		l.Err(err)
		return
	}
	if node == nil {
		// If there are simply no matching nodes, set the error and
		// return.
		ctx.Error = jas.NewRequestError("No matching node")
		return
	}

	// Remove any sensitive data.
	node.OwnerEmail = ""

	// Finally, set the data and exit.
	ctx.Data = node
}
Esempio n. 5
0
// GetVerify moves a node from the verification queue to the normal
// database, as identified by its long random ID.
func (*Api) GetVerify(ctx *jas.Context) {
	id := ctx.RequireInt("id")
	ip, verifyerr, err := Db.VerifyQueuedNode(id, ctx.Request)
	if verifyerr != nil {
		// If there was an error inverification, there was no internal
		// error, but the circumstances of the verification were
		// incorrect. It has not been removed from the database.
		ctx.Error = jas.NewRequestError(verifyerr.Error())
		return
	} else if err == sql.ErrNoRows {
		// If we encounter a ErrNoRows, then there was no node with
		// that ID. Report it.
		ctx.Error = jas.NewRequestError("invalid id")
		l.Noticef("%q attempted to verify invalid ID\n", ctx.RemoteAddr)
		return
	} else if err != nil {
		// If we encounter any other database error, it is an internal
		// error and needs to be logged.
		ctx.Error = jas.NewInternalError(err)
		l.Err(err)
		return
	}
	// If there was no error, inform the user that it was successful,
	// and log it.
	ctx.Data = "successful"
	l.Infof("Node %q verified", ip)
}
Esempio n. 6
0
func (*Sporocila) Get(ctx *jas.Context) { // `GET /sporocila/:offset`
	offset := ctx.RequireInt("offset")
	err, res := sporocilo.NajdiSporocila(int(offset))
	if err == nil {
		ctx.Data = res
	}
}
Esempio n. 7
0
func (*Weixin) Get(ctx *jas.Context) {
	fmt.Println("Get weixin")
	echostr := ctx.RequireString("echostr")
	nonce := ctx.RequireString("nonce")
	timestamp := ctx.RequireString("timestamp")
	sig := ctx.RequireString("signature")

	params := []string{nonce, timestamp, WEIXIN_TOKEN}
	sort.Sort(sort.StringSlice(params))
	data := ""
	for _, v := range params {
		data += v
	}
	sha1Sig := string(sha1s(data))

	ctx.Data = echostr
	if sig == sha1Sig {
		cfg := &jas.Config{}
		cfg.HijackWrite = func(writer io.Writer, ctx *jas.Context) int {
			len, _ := writer.Write([]byte(reflect.ValueOf(ctx.Data).String()))
			return len
		}
		//		ctx.SetConfig(cfg)
	}
}
Esempio n. 8
0
// GetAll dumps the entire database of nodes, including cached ones.
func (*Api) GetAll(ctx *jas.Context) {
	nodes, err := Db.DumpNodes()
	if err != nil {
		ctx.Error = jas.NewInternalError(err)
		l.Err(err)
		return
	}
	ctx.Data = nodes
}
Esempio n. 9
0
// GetStatus responds with a status summary of the map, including the
// map name, total number of nodes, number available (pingable), etc.
// (Not yet implemented.)
func (*Api) GetStatus(ctx *jas.Context) {
	localNodes := Db.LenNodes(false)
	ctx.Data = map[string]interface{}{
		"Name":        Conf.Name,
		"LocalNodes":  localNodes,
		"CachedNodes": Db.LenNodes(true) - localNodes,
		"CachedMaps":  len(Conf.ChildMaps),
	}
}
Esempio n. 10
0
// GetEcho responds with the remote address of the user
func (*Api) GetEcho(ctx *jas.Context) {
	if Conf.Verify.Netmask != nil {
		if !(*net.IPNet)(Conf.Verify.Netmask).Contains(net.IP(ctx.RemoteAddr)) {
			ctx.Data = ctx.RemoteAddr
		} else {
			ctx.Error = jas.NewRequestError("remote address not in subnet")
		}
	} else {
		ctx.Error = jas.NewRequestError("netmask not set")
	}
}
Esempio n. 11
0
func (*Machines) Post(ctx *jas.Context) {
	log.Println("Machines.Post")

	var machine models.Machine
	ctx.Unmarshal(&machine)

	u4, _ := uuid.NewV4()
	machine.UUID = u4.String()

	go machine.Save()
	ctx.Data = machine
}
Esempio n. 12
0
// GetNode retrieves a single node from the database, removes
// sensitive data (such as an email address) and sets ctx.Data to
// it. If `?geojson` is set, then it returns it in geojson.Feature
// form.
func (*Api) GetNode(ctx *jas.Context) {
	ip := IP(net.ParseIP(ctx.RequireStringLen(0, 40, "address")))
	if ip == nil {
		// If this is encountered, the address was incorrectly
		// formatted.
		ctx.Error = jas.NewRequestError("addressInvalid")
		return
	}
	node, err := Db.GetNode(ip)
	if err != nil {
		// If there has been a database error, log it and report the
		// failure.
		ctx.Error = jas.NewInternalError(err)
		l.Err(err)
		return
	}
	if node == nil {
		// If there are simply no matching nodes, set the error and
		// return.
		ctx.Error = jas.NewRequestError("No matching node")
		return
	}

	// We must invoke ParseForm() so that we can access ctx.Form.
	ctx.ParseForm()

	// If the form value 'geojson' is included, dump in GeoJSON
	// form. Otherwise, just dump with normal marhshalling.
	if _, ok := ctx.Form["geojson"]; ok {
		ctx.Data = node.Feature()
		return
	} else {
		// Only after removing any sensitive data, though.
		node.OwnerEmail = ""

		// Finally, set the data and exit.
		ctx.Data = node
	}
}
Esempio n. 13
0
func (*Sporocilo) Post(ctx *jas.Context) {
	nick := ctx.RequireString("nick")
	msg := ctx.RequireString("msg")
	title := ctx.RequireString("title")
	if nick != "" && msg != "" {
		err, res := sporocilo.ShraniSporocilo(nick, title, msg)
		if err == nil {
			b, _ := json.Marshal(res)
			log.Println(string(b))
			Notify(string(b))
			ctx.Data = res
		}
	}
}
Esempio n. 14
0
// PostDeleteNode removes a node with the given address from the
// database. This must be done from that node's address, or an admin
// address.
func (*Api) PostDeleteNode(ctx *jas.Context) {
	if Db.ReadOnly {
		// If the database is readonly, set that as the error and
		// return.
		ctx.Error = ReadOnlyError
		return
	}
	var err error

	// Require a token, because this is a very sensitive endpoint.
	RequireToken(ctx)

	// Retrieve the given IP address, check that it's sane, and check
	// that it exists in the *local* database.
	ip := IP(net.ParseIP(ctx.RequireStringLen(0, 40, "address")))
	if ip == nil {
		// If the address is invalid, return that error.
		ctx.Error = jas.NewRequestError("addressInvalid")
		return
	}

	// Check to make sure that the Node is the one sending the
	// address, or an admin. If not, return an error.
	if !net.IP(ip).Equal(net.ParseIP(ctx.RemoteAddr)) &&
		!IsAdmin(ctx.Request) {
		ctx.Error = jas.NewRequestError(
			RemoteAddressDoesNotMatchError.Error())
		return
	}

	// If all is well, then delete it.
	err = Db.DeleteNode(ip)
	if err == sql.ErrNoRows {
		// If there are no rows with that IP, explain that in the
		// error.
		//
		// I'm not actually sure this can happen. (DuoNoxSol)
		ctx.Error = jas.NewRequestError("no matching node")
	} else if err != nil {
		ctx.Error = jas.NewInternalError(err)
		l.Errf("Error deleting node: %s\n")
	} else {
		l.Infof("Node %q deleted\n", ip)
		ctx.Data = "deleted"
	}
}
Esempio n. 15
0
// PostNode creates a *Node from the submitted form and queues it for
// addition.
func (*Api) PostNode(ctx *jas.Context) {
	if Db.ReadOnly {
		// If the database is readonly, set that as the error and
		// return.
		ctx.Error = ReadOnlyError
		return
	}

	// Initialize the node and retrieve fields.
	node := new(Node)

	ip := IP(net.ParseIP(ctx.RequireString("address")))
	if ip == nil {
		// If the address is invalid, return that error.
		ctx.Error = jas.NewRequestError("addressInvalid")
		return
	}
	node.Addr = ip
	node.Latitude = ctx.RequireFloat("latitude")
	node.Longitude = ctx.RequireFloat("longitude")
	node.OwnerName = ctx.RequireString("name")
	node.OwnerEmail = ctx.RequireString("email")
	status, _ := ctx.FindInt("status")
	node.Status = int(status)

	// TODO(DuoNoxSol): Authenticate/limit node registration.

	err := Db.AddNode(node)
	if err != nil {
		// If there was an error, log it and report the failure.
		ctx.Error = jas.NewInternalError(err)
		l.Err(err)
		return
	}
	ctx.Data = "successful"
	l.Infof("Node %q registered\n", ip)
}
Esempio n. 16
0
func (*Hello) Get(ctx *jas.Context) {
	ctx.Data = "Hello World"
}
Esempio n. 17
0
// GetToken generates a short random token and stores it in an
// in-memory map with its generation time. (See CheckToken.)
func (*Api) GetToken(ctx *jas.Context) {
	tokenid := rand.Uint32()
	ActiveTokens[tokenid] = token{ctx.RemoteAddr, time.Now()}
	ctx.Data = tokenid
}
Esempio n. 18
0
// PostUpdateNode removes a Node of a given IP from the database and
// re-adds it with the supplied information. It is the equivalent of
// removing a Node from the database, then invoking PostNode() with
// its information, with the exception that it does not send a
// verification email, and requires that the request be sent by the
// Node that is being update.
func (*Api) PostUpdateNode(ctx *jas.Context) {
	if Db.ReadOnly {
		// If the database is readonly, set that as the error and
		// return.
		ctx.Error = ReadOnlyError
		return
	}
	var err error

	// Require a token, because this is a very sensitive endpoint.
	RequireToken(ctx)

	// Retrieve the given IP address, check that it's sane, and check
	// that it exists in the *local* database.
	ip := IP(net.ParseIP(ctx.RequireStringLen(0, 40, "address")))
	if ip == nil {
		// If the address is invalid, return that error.
		ctx.Error = jas.NewRequestError("addressInvalid")
		return
	}

	node, err := Db.GetNode(ip)
	if err != nil {
		ctx.Error = jas.NewInternalError(err.Error())
		return
	}

	if node == nil || len(node.OwnerEmail) == 0 {
		ctx.Error = jas.NewRequestError("no matching local node")
		return
	}

	// Check to make sure that the Node is the one sending the
	// address, or an admin. If not, return an error.
	if !net.IP(ip).Equal(net.ParseIP(ctx.RemoteAddr)) &&
		!IsAdmin(ctx.Request) {
		ctx.Error = jas.NewRequestError(
			RemoteAddressDoesNotMatchError.Error())
		return
	}

	node.Addr = ip
	node.Latitude = ctx.RequireFloat("latitude")
	node.Longitude = ctx.RequireFloat("longitude")
	node.OwnerName = html.EscapeString(ctx.RequireString("name"))
	node.Contact, err = ctx.FindString("contact")
	if err != nil {
		ctx.Error = jas.NewRequestError("someError")
		return
	}
	node.Contact = html.EscapeString(node.Contact)
	node.Details, err = ctx.FindString("details")
	if err != nil {
		ctx.Error = jas.NewRequestError("someError")
		return
	}
	node.Details = html.EscapeString(node.Details)

	// If Contact, Details, or OwnerName are too long to fit in
	// the database, produce an error.
	if len(node.Contact) > 255 {
		ctx.Error = jas.NewRequestError("contactTooLong")
		return
	}
	if len(node.Details) > 255 {
		ctx.Error = jas.NewRequestError("detailsTooLong")
		return
	}
	if len(node.OwnerName) > 255 {
		ctx.Error = jas.NewRequestError("ownerNameTooLong")
		return
	}

	// Validate the PGP ID, if given. It can be an lowercase hex
	// string of length 0, 8, or 16.
	pgpstr, _ := ctx.FindStringMatch(PGPRegexp, "pgp")
	if node.PGP, err = DecodePGPID([]byte(pgpstr)); err != nil {
		ctx.Error = jas.NewRequestError("pgpInvalid")
		return
	}
	status, _ := ctx.FindPositiveInt("status")
	node.Status = uint32(status)

	// Note that we do not perform a verification step here, or send
	// an email. Because the Node was already verified once, we can
	// assume that it remains usable.

	// Update the Node in the database, replacing the one of matching
	// IP.
	err = Db.UpdateNode(node)
	if err != nil {
		ctx.Error = jas.NewInternalError(err)
		l.Errf("Error updating %q: %s", node.Addr, err)
		return
	}

	// If we reach this point, all was successful.
	ctx.Data = "successful"
}
Esempio n. 19
0
func (*Radio) GetReceiverTypename(ctx *jas.Context) {
	ctx.Data = "receiver type name "
}
Esempio n. 20
0
func (*Radio) Typename(ctx *jas.Context) {
	name := ctx.GapSegment("")
	ctx.Data = string(name) + "type name"
	fmt.Println(name)
}
Esempio n. 21
0
// PostNode creates a *Node from the submitted form and queues it for
// addition with a positive 64 bit integer as an ID.
func (*Api) PostNode(ctx *jas.Context) {
	if Db.ReadOnly {
		// If the database is readonly, set that as the error and
		// return.
		ctx.Error = ReadOnlyError
		return
	}
	var err error

	// Require a token, because this is mildly sensitive.
	RequireToken(ctx)

	// Initialize the node and retrieve fields.
	node := new(Node)

	ip := IP(net.ParseIP(ctx.RequireStringLen(0, 40, "address")))
	if ip == nil {
		// If the address is invalid, return that error.
		ctx.Error = jas.NewRequestError("addressInvalid")
		return
	}
	node.Addr = ip
	node.Latitude = ctx.RequireFloat("latitude")
	node.Longitude = ctx.RequireFloat("longitude")
	node.OwnerName = html.EscapeString(ctx.RequireString("name"))
	node.OwnerEmail = ctx.RequireStringMatch(EmailRegexp, "email")

	node.Contact, _ = ctx.FindString("contact")
	node.Contact = html.EscapeString(node.Contact)

	node.Details, _ = ctx.FindString("details")
	node.Details = html.EscapeString(node.Details)

	// If Contact, Details, or OwnerName are too long to fit in
	// the database, produce an error.
	if len(node.Contact) > 255 {
		ctx.Error = jas.NewRequestError("contactTooLong")
		return
	}
	if len(node.Details) > 255 {
		ctx.Error = jas.NewRequestError("detailsTooLong")
		return
	}
	if len(node.OwnerName) > 255 {
		ctx.Error = jas.NewRequestError("ownerNameTooLong")
		return
	}

	// Validate the PGP ID, if given. It can be an lowercase hex
	// string of length 0, 8, or 16.
	pgpstr, _ := ctx.FindStringMatch(PGPRegexp, "pgp")
	if node.PGP, err = DecodePGPID([]byte(pgpstr)); err != nil {
		ctx.Error = jas.NewRequestError("pgpInvalid")
		return
	}
	status, _ := ctx.FindPositiveInt("status")
	node.Status = uint32(status)

	// Ensure that the node is correct and usable.
	if err = Db.VerifyRegistrant(node); err != nil {
		ctx.Error = jas.NewRequestError(err.Error())
		return
	}

	// TODO(DuoNoxSol): Authenticate/limit node registration.

	// If SMTP is missing from the config, we cannot continue.
	if Conf.SMTP == nil {
		ctx.Error = jas.NewInternalError(SMTPDisabledError)
		l.Err(SMTPDisabledError)
		return
	}

	// If SMTP verification is not explicitly disabled, and the
	// connecting address is not an admin, send an email.
	if !Conf.SMTP.VerifyDisabled && !IsAdmin(ctx.Request) {
		id := rand.Int63() // Pseudo-random positive int64

		emailsent := true
		if err := SendVerificationEmail(id, node.OwnerEmail); err != nil {
			// If the sending of the email fails, set the internal
			// error and log it, then set a bool so that email can be
			// resent. If email continues failing to send, it will
			// eventually expire and be removed from the database.
			ctx.Error = jas.NewInternalError(err)
			l.Err(err)
			emailsent = false
			// Note that we do *not* return here.
		}

		// Once we have attempted to send the email, queue the node
		// for verification. If the email has not been sent, it will
		// be recorded in the database.
		if err := Db.QueueNode(id, emailsent,
			Conf.VerificationExpiration, node); err != nil {
			// If there is a database failure, report it as an
			// internal error.
			ctx.Error = jas.NewInternalError(err)
			l.Err(err)
			return
		}

		// If the email could be sent successfully, report
		// it. Otherwise, report that it is in the queue, and the
		// email will be resent.
		if emailsent {
			ctx.Data = "verification email sent"
			l.Infof("Node %q entered, waiting for verification", ip)
		} else {
			ctx.Data = "verification email will be resent"
			l.Infof("Node %q entered, verification email will be resent",
				ip)
		}
	} else {
		err := Db.AddNode(node)
		if err != nil {
			// If there was an error, log it and report the failure.
			ctx.Error = jas.NewInternalError(err)
			l.Err(err)
			return
		}

		// Add the new node to the RSS feed.
		AddNodeToRSS(node, time.Now())

		ctx.Data = "node registered"
		l.Infof("Node %q registered\n", ip)
	}
}
Esempio n. 22
0
func (*Radio) GetReceiver(ctx *jas.Context) {
	ctx.Data = "receiver of Radio"
}
Esempio n. 23
0
// GetKey generates a CAPTCHA ID and returns it. This can be combined
// with the solution to the returned CAPTCHA to authenticate certain
// API functions. The CAPTCHAs can be accessed at /captcha/<id>.png or
// /captcha/<id>.wav.
func (*Api) GetKey(ctx *jas.Context) {
	ctx.Data = captcha.New()
}
Esempio n. 24
0
// Get responds on the root API handler ("/api/") with 303 SeeOther
// and a link to the API documentation on the project homepage.
func (*Api) Get(ctx *jas.Context) {
	ctx.Status = http.StatusSeeOther
	ctx.ResponseHeader.Set("Location", APIDocs)
	ctx.Data = http.StatusText(http.StatusSeeOther) + ": " + APIDocs
}
Esempio n. 25
0
func (*RadioId) GetReceiver(ctx *jas.Context) {
	id := ctx.Id
	_ = id
	ctx.Data = "ID  receiver " + string(id)
}
Esempio n. 26
0
// GetStatus responds with a status summary of the map, including the
// map name, total number of nodes, number available (pingable), etc.
// (Not yet implemented.)
func (*Api) GetStatus(ctx *jas.Context) {
	ctx.Data = apiStatus{
		Name:  Conf.Name,
		Nodes: Db.LenNodes(false),
	}
}
Esempio n. 27
0
func (*Hello) Get(ctx *jas.Context) { // `GET /v1/hello`
	ctx.Data = "hello world ,what are you doing?"
	//response: `{"data":"hello world","error":null}`
}
Esempio n. 28
0
func (*Receiver) Get(ctx *jas.Context) {
	ctx.Data = "you get a receiver!\n"
}
Esempio n. 29
0
func (*RadioId) PostReceiverId(ctx *jas.Context) {
	id := ctx.Id
	ctx.Data = "post Receiver id " + string(id)
}
Esempio n. 30
0
func (*Radio) Post(ctx *jas.Context) {
	ctx.Data = "POST sucessful"
}