Esempio n. 1
0
File: ipam.go Progetto: NeilW/rkt
// ConfigureIface takes the result of IPAM plugin and
// applies to the ifName interface
func ConfigureIface(ifName string, res *Result) error {
	link, err := netlink.LinkByName(ifName)
	if err != nil {
		return fmt.Errorf("failed to lookup %q: %v", ifName, err)
	}

	if err := netlink.LinkSetUp(link); err != nil {
		return fmt.Errorf("failed to set %q UP: %v", ifName, err)
	}

	// TODO(eyakubovich): IPv6
	addr := &netlink.Addr{IPNet: &res.IP4.IP, Label: ""}
	if err = netlink.AddrAdd(link, addr); err != nil {
		return fmt.Errorf("failed to add IP addr to %q: %v", ifName, err)
	}

	for _, r := range res.IP4.Routes {
		gw := r.GW
		if gw == nil {
			gw = res.IP4.Gateway
		}
		if err = ip.AddRoute(&r.Dst, gw, link); err != nil {
			// we skip over duplicate routes as we assume the first one wins
			if !os.IsExist(err) {
				return fmt.Errorf("failed to add route '%v via %v dev %v': %v", r.Dst, gw, ifName, err)
			}
		}
	}

	return nil
}
Esempio n. 2
0
File: ptp.go Progetto: matomesc/rkt
func setupHostVeth(vethName string, ipConf *types.IPConfig) error {
	// hostVeth moved namespaces and may have a new ifindex
	veth, err := netlink.LinkByName(vethName)
	if err != nil {
		return fmt.Errorf("failed to lookup %q: %v", vethName, err)
	}

	// TODO(eyakubovich): IPv6
	ipn := &net.IPNet{
		IP:   ipConf.Gateway,
		Mask: net.CIDRMask(32, 32),
	}
	addr := &netlink.Addr{IPNet: ipn, Label: ""}
	if err = netlink.AddrAdd(veth, addr); err != nil {
		return fmt.Errorf("failed to add IP addr (%#v) to veth: %v", ipn, err)
	}

	ipn = &net.IPNet{
		IP:   ipConf.IP.IP,
		Mask: net.CIDRMask(32, 32),
	}
	// dst happens to be the same as IP/net of host veth
	if err = ip.AddHostRoute(ipn, nil, veth); err != nil && !os.IsExist(err) {
		return fmt.Errorf("failed to add route on host: %v", err)
	}

	return nil
}
Esempio n. 3
0
// SetupVeth sets up a virtual ethernet link.
// Should be in container netns.
func SetupVeth(contVethName string, mtu int, hostNS *os.File) (hostVeth, contVeth netlink.Link, err error) {
	var hostVethName string
	hostVethName, contVeth, err = makeVeth(contVethName, mtu)
	if err != nil {
		return
	}

	if err = netlink.LinkSetUp(contVeth); err != nil {
		err = fmt.Errorf("failed to set %q up: %v", contVethName, err)
		return
	}

	hostVeth, err = netlink.LinkByName(hostVethName)
	if err != nil {
		err = fmt.Errorf("failed to lookup %q: %v", hostVethName, err)
		return
	}

	if err = netlink.LinkSetUp(hostVeth); err != nil {
		err = fmt.Errorf("failed to set %q up: %v", contVethName, err)
		return
	}

	if err = netlink.LinkSetNsFd(hostVeth, int(hostNS.Fd())); err != nil {
		err = fmt.Errorf("failed to move veth to host netns: %v", err)
		return
	}

	return
}
Esempio n. 4
0
// SetupVeth sets up a virtual ethernet link.
// Should be in container netns.
// TODO(eyakubovich): get rid of entropy and ask kernel to pick name via pattern
func SetupVeth(entropy, contVethName string, mtu int, hostNS *os.File) (hostVeth, contVeth netlink.Link, err error) {
	// NetworkManager (recent versions) will ignore veth devices that start with "veth"
	hostVethName := RandomVethName(entropy)
	hostVeth, err = makeVeth(hostVethName, contVethName, mtu)
	if err != nil {
		err = fmt.Errorf("failed to make veth pair: %v", err)
		return
	}

	if err = netlink.LinkSetUp(hostVeth); err != nil {
		err = fmt.Errorf("failed to set %q up: %v", hostVethName, err)
		return
	}

	contVeth, err = netlink.LinkByName(contVethName)
	if err != nil {
		err = fmt.Errorf("failed to lookup %q: %v", contVethName, err)
		return
	}

	if err = netlink.LinkSetUp(contVeth); err != nil {
		err = fmt.Errorf("failed to set %q up: %v", contVethName, err)
		return
	}

	if err = netlink.LinkSetNsFd(hostVeth, int(hostNS.Fd())); err != nil {
		err = fmt.Errorf("failed to move veth to host netns: %v", err)
		return
	}

	return
}
Esempio n. 5
0
func setupVeth(netns string, br *netlink.Bridge, ifName string, mtu int, pr *plugin.Result) error {
	var hostVethName string

	err := ns.WithNetNSPath(netns, func(hostNS *os.File) error {
		// create the veth pair in the container and move host end into host netns
		hostVeth, _, err := ip.SetupVeth(netns, ifName, mtu, hostNS)
		if err != nil {
			return err
		}

		if err = plugin.ConfigureIface(ifName, pr); err != nil {
			return err
		}

		hostVethName = hostVeth.Attrs().Name
		return nil
	})
	if err != nil {
		return err
	}

	// need to lookup hostVeth again as its index has changed during ns move
	hostVeth, err := netlink.LinkByName(hostVethName)
	if err != nil {
		return fmt.Errorf("failed to lookup %q: %v", hostVethName, err)
	}

	// connect host veth end to the bridge
	if err = netlink.LinkSetMaster(hostVeth, br); err != nil {
		return fmt.Errorf("failed to connect %q to bridge %v: %v", hostVethName, br.Attrs().Name, err)
	}

	return nil
}
Esempio n. 6
0
func createIpvlan(conf *NetConf, ifName string, netns *os.File) error {
	mode, err := modeFromString(conf.Mode)
	if err != nil {
		return err
	}

	m, err := netlink.LinkByName(conf.Master)
	if err != nil {
		return fmt.Errorf("failed to lookup master %q: %v", conf.Master, err)
	}

	mv := &netlink.IPVlan{
		LinkAttrs: netlink.LinkAttrs{
			MTU:         conf.MTU,
			Name:        ifName,
			ParentIndex: m.Attrs().Index,
			Namespace:   netlink.NsFd(int(netns.Fd())),
		},
		Mode: mode,
	}

	if err := netlink.LinkAdd(mv); err != nil {
		return fmt.Errorf("failed to create ipvlan: %v", err)
	}

	return err
}
Esempio n. 7
0
func renameLink(curName, newName string) error {
	link, err := netlink.LinkByName(curName)
	if err != nil {
		return err
	}

	return netlink.LinkSetName(link, newName)
}
Esempio n. 8
0
func bridgeByName(name string) (*netlink.Bridge, error) {
	l, err := netlink.LinkByName(name)
	if err != nil {
		return nil, fmt.Errorf("could not lookup %q: %v", name, err)
	}
	br, ok := l.(*netlink.Bridge)
	if !ok {
		return nil, fmt.Errorf("%q already exists but is not a bridge", name)
	}
	return br, nil
}
Esempio n. 9
0
func loUp() error {
	lo, err := netlink.LinkByName("lo")
	if err != nil {
		return fmt.Errorf("failed to lookup lo: %v", err)
	}

	if err := netlink.LinkSetUp(lo); err != nil {
		return fmt.Errorf("failed to set lo up: %v", err)
	}

	return nil
}
Esempio n. 10
0
// DelLinkByName removes an interface link.
func DelLinkByName(ifName string) error {
	iface, err := netlink.LinkByName(ifName)
	if err != nil {
		return fmt.Errorf("failed to lookup %q: %v", ifName, err)
	}

	if err = netlink.LinkDel(iface); err != nil {
		return fmt.Errorf("failed to delete %q: %v", ifName, err)
	}

	return nil
}
Esempio n. 11
0
func getDefaultGW(family int) (string, error) {
	l, err := netlink.LinkByName("lo")
	if err != nil {
		return "", err
	}

	routes, err := netlink.RouteList(l, family)
	if err != nil {
		return "", err
	}

	return routes[0].Gw.String(), nil
}
Esempio n. 12
0
File: kvm.go Progetto: matomesc/rkt
func (an activeNet) IfName() string {
	if an.conf.Type == "macvlan" {
		// macvtap device passed as parameter to lkvm binary have different
		// kind of name, path to /dev/tapN made with N as link index
		link, err := netlink.LinkByName(an.runtime.IfName)
		if err != nil {
			log.Printf("Cannot get interface '%v': %v", an.runtime.IfName, err)
			return ""
		}
		return fmt.Sprintf("/dev/tap%d", link.Attrs().Index)
	}
	return an.runtime.IfName
}
Esempio n. 13
0
// setupTapDevice creates persistent tap devices
// and returns a newly created netlink.Link structure
func setupTapDevice() (netlink.Link, error) {
	ifName, err := tuntap.CreatePersistentIface(tuntap.Tap)
	if err != nil {
		return nil, fmt.Errorf("tuntap persist %v", err)
	}
	link, err := netlink.LinkByName(ifName)
	if err != nil {
		return nil, fmt.Errorf("cannot find link %q: %v", ifName, err)
	}
	err = netlink.LinkSetUp(link)
	if err != nil {
		return nil, fmt.Errorf("cannot set link up %q: %v", ifName, err)
	}
	return link, nil
}
Esempio n. 14
0
// DelLinkByNameAddr remove an interface returns its IP address
// of the specified family
func DelLinkByNameAddr(ifName string, family int) (*net.IPNet, error) {
	iface, err := netlink.LinkByName(ifName)
	if err != nil {
		return nil, fmt.Errorf("failed to lookup %q: %v", ifName, err)
	}

	addrs, err := netlink.AddrList(iface, family)
	if err != nil || len(addrs) == 0 {
		return nil, fmt.Errorf("failed to get IP addresses for %q: %v", ifName, err)
	}

	if err = netlink.LinkDel(iface); err != nil {
		return nil, fmt.Errorf("failed to delete %q: %v", ifName, err)
	}

	return addrs[0].IPNet, nil
}
Esempio n. 15
0
File: kvm.go Progetto: harpe1999/rkt
// setupTapDevice creates persistent tap devices
// and returns a newly created netlink.Link structure
func setupTapDevice(podID types.UUID) (netlink.Link, error) {
	// network device names are limited to 16 characters
	// the suffix %d will be replaced by the kernel with a suitable number
	nameTemplate := fmt.Sprintf("rkt-%s-tap%%d", podID.String()[0:4])
	ifName, err := tuntap.CreatePersistentIface(nameTemplate, tuntap.Tap)
	if err != nil {
		return nil, fmt.Errorf("tuntap persist %v", err)
	}
	link, err := netlink.LinkByName(ifName)
	if err != nil {
		return nil, fmt.Errorf("cannot find link %q: %v", ifName, err)
	}
	err = netlink.LinkSetUp(link)
	if err != nil {
		return nil, fmt.Errorf("cannot set link up %q: %v", ifName, err)
	}
	return link, nil
}
Esempio n. 16
0
File: kvm.go Progetto: matomesc/rkt
// teardownKvmNets teardown every active networking from networking by
// removing tuntap interface and releasing its ip from IPAM plugin
func (n *Networking) teardownKvmNets() {
	for _, an := range n.nets {
		switch an.conf.Type {
		case "ptp", "bridge":
			// remove tuntap interface
			tuntap.RemovePersistentIface(an.runtime.IfName, tuntap.Tap)

		case "macvlan":
			link, err := netlink.LinkByName(an.runtime.IfName)
			if err != nil {
				log.Printf("Cannot find link `%v`: %v", an.runtime.IfName, err)
				continue
			} else {
				err := netlink.LinkDel(link)
				if err != nil {
					log.Printf("Cannot remove link `%v`: %v", an.runtime.IfName, err)
					continue
				}
			}

		default:
			log.Printf("Unsupported network type: %q", an.conf.Type)
			continue
		}
		// ugly hack again to directly call IPAM plugin to release IP
		an.conf.Type = an.conf.IPAM.Type

		_, err := n.execNetPlugin("DEL", &an, an.runtime.IfName)
		if err != nil {
			log.Printf("Error executing network plugin: %q", err)
		}
		// remove masquerading if it was prepared
		if an.conf.IPMasq {
			chain := getChainName(n.podID.String(), an.conf.Name)
			err := ip.TeardownIPMasq(&net.IPNet{
				IP:   an.runtime.IP,
				Mask: net.IPMask(an.runtime.Mask),
			}, chain)
			if err != nil {
				log.Printf("Error on removing masquerading: %q", err)
			}
		}
	}
}
Esempio n. 17
0
File: kvm.go Progetto: matomesc/rkt
// setupTapDevice creates persistent macvtap device
// and returns a newly created netlink.Link structure
func setupMacVTapDevice(podID types.UUID, config MacVTapNetConf) (netlink.Link, error) {
	master, err := netlink.LinkByName(config.Master)
	if err != nil {
		return nil, fmt.Errorf("Cannot find master device '%v': %v", config.Master, err)
	}
	var mode netlink.MacvlanMode
	switch config.Mode {
	// if not set - defaults to bridge mode as in:
	// https://github.com/coreos/rkt/blob/master/Documentation/networking.md#macvlan
	case "", "bridge":
		mode = netlink.MACVLAN_MODE_BRIDGE
	case "private":
		mode = netlink.MACVLAN_MODE_PRIVATE
	case "vepa":
		mode = netlink.MACVLAN_MODE_VEPA
	case "passthru":
		mode = netlink.MACVLAN_MODE_PASSTHRU
	default:
		return nil, fmt.Errorf("Unsupported macvtap mode: %v", config.Mode)
	}
	mtu := master.Attrs().MTU
	if config.MTU != 0 {
		mtu = config.MTU
	}
	nameTemplate := fmt.Sprintf("rkt-%s-vtap%%d", podID.String()[0:4])
	link := &netlink.Macvtap{
		Macvlan: netlink.Macvlan{
			LinkAttrs: netlink.LinkAttrs{
				Name:        nameTemplate,
				MTU:         mtu,
				ParentIndex: master.Attrs().Index,
			},
			Mode: mode,
		},
	}

	if err := netlink.LinkAdd(link); err != nil {
		return nil, fmt.Errorf("Cannot create macvtap interface: %v", err)
	}
	return link, nil
}
Esempio n. 18
0
func createMacvlan(conf *NetConf, ifName string, netns *os.File) error {
	mode, err := modeFromString(conf.Mode)
	if err != nil {
		return err
	}

	m, err := netlink.LinkByName(conf.Master)
	if err != nil {
		return fmt.Errorf("failed to lookup master %q: %v", conf.Master, err)
	}

	// due to kernel bug we have to create with tmpname or it might
	// collide with the name on the host and error out
	tmpName, err := ip.RandomVethName()
	if err != nil {
		return err
	}

	mv := &netlink.Macvlan{
		LinkAttrs: netlink.LinkAttrs{
			MTU:         conf.MTU,
			Name:        tmpName,
			ParentIndex: m.Attrs().Index,
			Namespace:   netlink.NsFd(int(netns.Fd())),
		},
		Mode: mode,
	}

	if err := netlink.LinkAdd(mv); err != nil {
		return fmt.Errorf("failed to create macvlan: %v", err)
	}

	return ns.WithNetNS(netns, false, func(_ *os.File) error {
		err := renameLink(tmpName, ifName)
		if err != nil {
			return fmt.Errorf("failed to rename macvlan to %q: %v", ifName, err)
		}
		return nil
	})
}
Esempio n. 19
0
// AcquireLease gets an DHCP lease and then maintains it in the background
// by periodically renewing it. The acquired lease can be released by
// calling DHCPLease.Stop()
func AcquireLease(clientID, netns, ifName string) (*DHCPLease, error) {
	errCh := make(chan error, 1)
	l := &DHCPLease{
		clientID: clientID,
		stop:     make(chan struct{}),
	}

	log.Printf("%v: acquiring lease", clientID)

	l.wg.Add(1)
	go func() {
		errCh <- ns.WithNetNSPath(netns, true, func(_ *os.File) error {
			defer l.wg.Done()

			link, err := netlink.LinkByName(ifName)
			if err != nil {
				return fmt.Errorf("error looking up %q: %v", ifName, err)
			}

			l.link = link

			if err = l.acquire(); err != nil {
				return err
			}

			log.Printf("%v: lease acquired, expiration is %v", l.clientID, l.expireTime)

			errCh <- nil

			l.maintain()
			return nil
		})
	}()

	if err := <-errCh; err != nil {
		return nil, err
	}

	return l, nil
}
Esempio n. 20
0
File: ptp.go Progetto: matomesc/rkt
func setupContainerVeth(netns, ifName string, mtu int, pr *types.Result) (string, error) {
	// The IPAM result will be something like IP=192.168.3.5/24, GW=192.168.3.1.
	// What we want is really a point-to-point link but veth does not support IFF_POINTOPONT.
	// Next best thing would be to let it ARP but set interface to 192.168.3.5/32 and
	// add a route like "192.168.3.0/24 via 192.168.3.1 dev $ifName".
	// Unfortunately that won't work as the GW will be outside the interface's subnet.

	// Our solution is to configure the interface with 192.168.3.5/24, then delete the
	// "192.168.3.0/24 dev $ifName" route that was automatically added. Then we add
	// "192.168.3.1/32 dev $ifName" and "192.168.3.0/24 via 192.168.3.1 dev $ifName".
	// In other words we force all traffic to ARP via the gateway except for GW itself.

	var hostVethName string
	err := ns.WithNetNSPath(netns, false, func(hostNS *os.File) error {
		hostVeth, _, err := ip.SetupVeth(ifName, mtu, hostNS)
		if err != nil {
			return err
		}

		if err = ipam.ConfigureIface(ifName, pr); err != nil {
			return err
		}

		contVeth, err := netlink.LinkByName(ifName)
		if err != nil {
			return fmt.Errorf("failed to look up %q: %v", ifName, err)
		}

		// Delete the route that was automatically added
		route := netlink.Route{
			LinkIndex: contVeth.Attrs().Index,
			Dst: &net.IPNet{
				IP:   pr.IP4.IP.IP.Mask(pr.IP4.IP.Mask),
				Mask: pr.IP4.IP.Mask,
			},
			Scope: netlink.SCOPE_NOWHERE,
		}

		if err := netlink.RouteDel(&route); err != nil {
			return fmt.Errorf("failed to delete route %v: %v", route, err)
		}

		for _, r := range []netlink.Route{
			netlink.Route{
				LinkIndex: contVeth.Attrs().Index,
				Dst: &net.IPNet{
					IP:   pr.IP4.Gateway,
					Mask: net.CIDRMask(32, 32),
				},
				Scope: netlink.SCOPE_LINK,
				Src:   pr.IP4.IP.IP,
			},
			netlink.Route{
				LinkIndex: contVeth.Attrs().Index,
				Dst: &net.IPNet{
					IP:   pr.IP4.IP.IP.Mask(pr.IP4.IP.Mask),
					Mask: pr.IP4.IP.Mask,
				},
				Scope: netlink.SCOPE_UNIVERSE,
				Gw:    pr.IP4.Gateway,
				Src:   pr.IP4.IP.IP,
			},
		} {
			if err := netlink.RouteAdd(&r); err != nil {
				return fmt.Errorf("failed to add route %v: %v", r, err)
			}
		}

		hostVethName = hostVeth.Attrs().Name

		return nil
	})
	return hostVethName, err
}