Esempio n. 1
0
// createContainerPlatformSpecificSettings performs platform specific container create functionality
func (daemon *Daemon) createContainerPlatformSpecificSettings(container *container.Container, config *runconfig.Config, hostConfig *runconfig.HostConfig, img *image.Image) error {
	if err := daemon.Mount(container); err != nil {
		return err
	}
	defer daemon.Unmount(container)

	for spec := range config.Volumes {
		name := stringid.GenerateNonCryptoID()
		destination := filepath.Clean(spec)

		// Skip volumes for which we already have something mounted on that
		// destination because of a --volume-from.
		if container.IsDestinationMounted(destination) {
			continue
		}
		path, err := container.GetResourcePath(destination)
		if err != nil {
			return err
		}

		stat, err := os.Stat(path)
		if err == nil && !stat.IsDir() {
			return derr.ErrorCodeMountOverFile.WithArgs(path)
		}

		volumeDriver := hostConfig.VolumeDriver
		if destination != "" && img != nil {
			if _, ok := img.ContainerConfig.Volumes[destination]; ok {
				// check for whether bind is not specified and then set to local
				if _, ok := container.MountPoints[destination]; !ok {
					volumeDriver = volume.DefaultDriverName
				}
			}
		}

		v, err := daemon.createVolume(name, volumeDriver, nil)
		if err != nil {
			return err
		}

		if err := label.Relabel(v.Path(), container.MountLabel, true); err != nil {
			return err
		}

		// never attempt to copy existing content in a container FS to a shared volume
		if v.DriverName() == volume.DefaultDriverName {
			if err := container.CopyImagePathContent(v, destination); err != nil {
				return err
			}
		}

		container.AddMountPointWithVolume(destination, v, true)
	}
	return nil
}
Esempio n. 2
0
// verifyVolumesInfo ports volumes configured for the containers pre docker 1.7.
// It reads the container configuration and creates valid mount points for the old volumes.
func (daemon *Daemon) verifyVolumesInfo(container *container.Container) error {
	// Inspect old structures only when we're upgrading from old versions
	// to versions >= 1.7 and the MountPoints has not been populated with volumes data.
	type volumes struct {
		Volumes   map[string]string
		VolumesRW map[string]bool
	}
	cfgPath, err := container.ConfigPath()
	if err != nil {
		return err
	}
	f, err := os.Open(cfgPath)
	if err != nil {
		return errors.Wrap(err, "could not open container config")
	}
	defer f.Close()
	var cv volumes
	if err := json.NewDecoder(f).Decode(&cv); err != nil {
		return errors.Wrap(err, "could not decode container config")
	}

	if len(container.MountPoints) == 0 && len(cv.Volumes) > 0 {
		for destination, hostPath := range cv.Volumes {
			vfsPath := filepath.Join(daemon.root, "vfs", "dir")
			rw := cv.VolumesRW != nil && cv.VolumesRW[destination]

			if strings.HasPrefix(hostPath, vfsPath) {
				id := filepath.Base(hostPath)
				v, err := daemon.volumes.CreateWithRef(id, volume.DefaultDriverName, container.ID, nil, nil)
				if err != nil {
					return err
				}
				if err := migrateVolume(id, hostPath); err != nil {
					return err
				}
				container.AddMountPointWithVolume(destination, v, true)
			} else { // Bind mount
				m := volume.MountPoint{Source: hostPath, Destination: destination, RW: rw}
				container.MountPoints[destination] = &m
			}
		}
		return container.ToDisk()
	}
	return nil
}
Esempio n. 3
0
// createContainerPlatformSpecificSettings performs platform specific container create functionality
func (daemon *Daemon) createContainerPlatformSpecificSettings(container *container.Container, config *containertypes.Config, hostConfig *containertypes.HostConfig) error {
	if err := daemon.Mount(container); err != nil {
		return err
	}
	defer daemon.Unmount(container)

	rootUID, rootGID := daemon.GetRemappedUIDGID()
	if err := container.SetupWorkingDirectory(rootUID, rootGID); err != nil {
		return err
	}

	for spec := range config.Volumes {
		name := stringid.GenerateNonCryptoID()
		destination := filepath.Clean(spec)

		// Skip volumes for which we already have something mounted on that
		// destination because of a --volume-from.
		if container.IsDestinationMounted(destination) {
			continue
		}
		path, err := container.GetResourcePath(destination)
		if err != nil {
			return err
		}

		stat, err := os.Stat(path)
		if err == nil && !stat.IsDir() {
			return fmt.Errorf("cannot mount volume over existing file, file exists %s", path)
		}

		v, err := daemon.volumes.CreateWithRef(name, hostConfig.VolumeDriver, container.ID, nil, nil)
		if err != nil {
			return err
		}

		if err := label.Relabel(v.Path(), container.MountLabel, true); err != nil {
			return err
		}

		container.AddMountPointWithVolume(destination, v, true)
	}
	return daemon.populateVolumes(container)
}
Esempio n. 4
0
// createContainerPlatformSpecificSettings performs platform specific container create functionality
func (daemon *Daemon) createContainerPlatformSpecificSettings(container *container.Container, config *containertypes.Config, hostConfig *containertypes.HostConfig) error {
	for spec := range config.Volumes {

		mp, err := volume.ParseMountSpec(spec, hostConfig.VolumeDriver)
		if err != nil {
			return fmt.Errorf("Unrecognised volume spec: %v", err)
		}

		// If the mountpoint doesn't have a name, generate one.
		if len(mp.Name) == 0 {
			mp.Name = stringid.GenerateNonCryptoID()
		}

		// Skip volumes for which we already have something mounted on that
		// destination because of a --volume-from.
		if container.IsDestinationMounted(mp.Destination) {
			continue
		}

		volumeDriver := hostConfig.VolumeDriver

		// Create the volume in the volume driver. If it doesn't exist,
		// a new one will be created.
		v, err := daemon.volumes.CreateWithRef(mp.Name, volumeDriver, container.ID, nil, nil)
		if err != nil {
			return err
		}

		// FIXME Windows: This code block is present in the Linux version and
		// allows the contents to be copied to the container FS prior to it
		// being started. However, the function utilizes the FollowSymLinkInScope
		// path which does not cope with Windows volume-style file paths. There
		// is a separate effort to resolve this (@swernli), so this processing
		// is deferred for now. A case where this would be useful is when
		// a dockerfile includes a VOLUME statement, but something is created
		// in that directory during the dockerfile processing. What this means
		// on Windows for TP5 is that in that scenario, the contents will not
		// copied, but that's (somewhat) OK as HCS will bomb out soon after
		// at it doesn't support mapped directories which have contents in the
		// destination path anyway.
		//
		// Example for repro later:
		//   FROM windowsservercore
		//   RUN mkdir c:\myvol
		//   RUN copy c:\windows\system32\ntdll.dll c:\myvol
		//   VOLUME "c:\myvol"
		//
		// Then
		//   docker build -t vol .
		//   docker run -it --rm vol cmd  <-- This is where HCS will error out.
		//
		//	// never attempt to copy existing content in a container FS to a shared volume
		//	if v.DriverName() == volume.DefaultDriverName {
		//		if err := container.CopyImagePathContent(v, mp.Destination); err != nil {
		//			return err
		//		}
		//	}

		// Add it to container.MountPoints
		container.AddMountPointWithVolume(mp.Destination, v, mp.RW)
	}
	return nil
}