Esempio n. 1
0
// InstallFlags adds command-line options to the top-level flag parser for
// the current process.
// Subsequent calls to `flag.Parse` will populate config with values parsed
// from the command-line.
func (config *Config) InstallFlags(cmd *flag.FlagSet, usageFn func(string) string) {
	// First handle install flags which are consistent cross-platform
	config.InstallCommonFlags(cmd, usageFn)

	// Then platform-specific install flags
	cmd.BoolVar(&config.EnableSelinuxSupport, []string{"-selinux-enabled"}, false, usageFn("Enable selinux support"))
	cmd.StringVar(&config.SocketGroup, []string{"G", "-group"}, "docker", usageFn("Group for the unix socket"))
	config.Ulimits = make(map[string]*ulimit.Ulimit)
	cmd.Var(opts.NewUlimitOpt(&config.Ulimits), []string{"-default-ulimit"}, usageFn("Set default ulimits for containers"))
	cmd.BoolVar(&config.Bridge.EnableIPTables, []string{"#iptables", "-iptables"}, true, usageFn("Enable addition of iptables rules"))
	cmd.BoolVar(&config.Bridge.EnableIPForward, []string{"#ip-forward", "-ip-forward"}, true, usageFn("Enable net.ipv4.ip_forward"))
	cmd.BoolVar(&config.Bridge.EnableIPMasq, []string{"-ip-masq"}, true, usageFn("Enable IP masquerading"))
	cmd.BoolVar(&config.Bridge.EnableIPv6, []string{"-ipv6"}, false, usageFn("Enable IPv6 networking"))
	cmd.StringVar(&config.Bridge.IP, []string{"#bip", "-bip"}, "", usageFn("Specify network bridge IP"))
	cmd.StringVar(&config.Bridge.Iface, []string{"b", "-bridge"}, "", usageFn("Attach containers to a network bridge"))
	cmd.StringVar(&config.Bridge.FixedCIDR, []string{"-fixed-cidr"}, "", usageFn("IPv4 subnet for fixed IPs"))
	cmd.StringVar(&config.Bridge.FixedCIDRv6, []string{"-fixed-cidr-v6"}, "", usageFn("IPv6 subnet for fixed IPs"))
	cmd.Var(opts.NewIPOpt(&config.Bridge.DefaultGatewayIPv4, ""), []string{"-default-gateway"}, usageFn("Container default gateway IPv4 address"))
	cmd.Var(opts.NewIPOpt(&config.Bridge.DefaultGatewayIPv6, ""), []string{"-default-gateway-v6"}, usageFn("Container default gateway IPv6 address"))
	cmd.BoolVar(&config.Bridge.InterContainerCommunication, []string{"#icc", "-icc"}, true, usageFn("Enable inter-container communication"))
	cmd.Var(opts.NewIPOpt(&config.Bridge.DefaultIP, "0.0.0.0"), []string{"#ip", "-ip"}, usageFn("Default IP when binding container ports"))
	cmd.BoolVar(&config.Bridge.EnableUserlandProxy, []string{"-userland-proxy"}, true, usageFn("Use userland proxy for loopback traffic"))
	cmd.BoolVar(&config.EnableCors, []string{"#api-enable-cors", "#-api-enable-cors"}, false, usageFn("Enable CORS headers in the remote API, this is deprecated by --api-cors-header"))
	cmd.StringVar(&config.CorsHeaders, []string{"-api-cors-header"}, "", usageFn("Set CORS headers in the remote API"))

	config.attachExperimentalFlags(cmd, usageFn)
}
Esempio n. 2
0
// InstallFlags adds flags to the pflag.FlagSet to configure the daemon
func (config *Config) InstallFlags(flags *pflag.FlagSet) {
	// First handle install flags which are consistent cross-platform
	config.InstallCommonFlags(flags)

	// Then install flags common to unix platforms
	config.InstallCommonUnixFlags(flags)

	config.Ulimits = make(map[string]*units.Ulimit)

	// Then platform-specific install flags
	flags.BoolVar(&config.EnableSelinuxSupport, "selinux-enabled", false, "Enable selinux support")
	flags.Var(opts.NewUlimitOpt(&config.Ulimits), "default-ulimit", "Default ulimits for containers")
	flags.BoolVar(&config.bridgeConfig.EnableIPTables, "iptables", true, "Enable addition of iptables rules")
	flags.BoolVar(&config.bridgeConfig.EnableIPForward, "ip-forward", true, "Enable net.ipv4.ip_forward")
	flags.BoolVar(&config.bridgeConfig.EnableIPMasq, "ip-masq", true, "Enable IP masquerading")
	flags.BoolVar(&config.bridgeConfig.EnableIPv6, "ipv6", false, "Enable IPv6 networking")
	flags.StringVar(&config.ExecRoot, "exec-root", defaultExecRoot, "Root directory for execution state files")
	flags.StringVar(&config.bridgeConfig.FixedCIDRv6, "fixed-cidr-v6", "", "IPv6 subnet for fixed IPs")
	flags.BoolVar(&config.bridgeConfig.EnableUserlandProxy, "userland-proxy", true, "Use userland proxy for loopback traffic")
	flags.StringVar(&config.bridgeConfig.UserlandProxyPath, "userland-proxy-path", "", "Path to the userland proxy binary")
	flags.BoolVar(&config.EnableCors, "api-enable-cors", false, "Enable CORS headers in the Engine API, this is deprecated by --api-cors-header")
	flags.MarkDeprecated("api-enable-cors", "Please use --api-cors-header")
	flags.StringVar(&config.CgroupParent, "cgroup-parent", "", "Set parent cgroup for all containers")
	flags.StringVar(&config.RemappedRoot, "userns-remap", "", "User/Group setting for user namespaces")
	flags.StringVar(&config.ContainerdAddr, "containerd", "", "Path to containerd socket")
	flags.BoolVar(&config.LiveRestoreEnabled, "live-restore", false, "Enable live restore of docker when containers are still running")
	flags.IntVar(&config.OOMScoreAdjust, "oom-score-adjust", -500, "Set the oom_score_adj for the daemon")
	flags.BoolVar(&config.Init, "init", false, "Run an init in the container to forward signals and reap processes")
	flags.StringVar(&config.InitPath, "init-path", "", "Path to the docker-init binary")
	flags.Int64Var(&config.CPURealtimePeriod, "cpu-rt-period", 0, "Limit the CPU real-time period in microseconds")
	flags.Int64Var(&config.CPURealtimeRuntime, "cpu-rt-runtime", 0, "Limit the CPU real-time runtime in microseconds")
	flags.StringVar(&config.SeccompProfile, "seccomp-profile", "", "Path to seccomp profile")

	config.attachExperimentalFlags(flags)
}
Esempio n. 3
0
// NewBuildCommand creates a new `docker build` command
func NewBuildCommand(dockerCli *command.DockerCli) *cobra.Command {
	ulimits := make(map[string]*units.Ulimit)
	options := buildOptions{
		tags:      opts.NewListOpts(validateTag),
		buildArgs: opts.NewListOpts(opts.ValidateEnv),
		ulimits:   opts.NewUlimitOpt(&ulimits),
		labels:    opts.NewListOpts(opts.ValidateEnv),
	}

	cmd := &cobra.Command{
		Use:   "build [OPTIONS] PATH | URL | -",
		Short: "Build an image from a Dockerfile",
		Args:  cli.ExactArgs(1),
		RunE: func(cmd *cobra.Command, args []string) error {
			options.context = args[0]
			return runBuild(dockerCli, options)
		},
	}

	flags := cmd.Flags()

	flags.VarP(&options.tags, "tag", "t", "Name and optionally a tag in the 'name:tag' format")
	flags.Var(&options.buildArgs, "build-arg", "Set build-time variables")
	flags.Var(options.ulimits, "ulimit", "Ulimit options")
	flags.StringVarP(&options.dockerfileName, "file", "f", "", "Name of the Dockerfile (Default is 'PATH/Dockerfile')")
	flags.StringVarP(&options.memory, "memory", "m", "", "Memory limit")
	flags.StringVar(&options.memorySwap, "memory-swap", "", "Swap limit equal to memory plus swap: '-1' to enable unlimited swap")
	flags.StringVar(&options.shmSize, "shm-size", "", "Size of /dev/shm, default value is 64MB")
	flags.Int64VarP(&options.cpuShares, "cpu-shares", "c", 0, "CPU shares (relative weight)")
	flags.Int64Var(&options.cpuPeriod, "cpu-period", 0, "Limit the CPU CFS (Completely Fair Scheduler) period")
	flags.Int64Var(&options.cpuQuota, "cpu-quota", 0, "Limit the CPU CFS (Completely Fair Scheduler) quota")
	flags.StringVar(&options.cpuSetCpus, "cpuset-cpus", "", "CPUs in which to allow execution (0-3, 0,1)")
	flags.StringVar(&options.cpuSetMems, "cpuset-mems", "", "MEMs in which to allow execution (0-3, 0,1)")
	flags.StringVar(&options.cgroupParent, "cgroup-parent", "", "Optional parent cgroup for the container")
	flags.StringVar(&options.isolation, "isolation", "", "Container isolation technology")
	flags.Var(&options.labels, "label", "Set metadata for an image")
	flags.BoolVar(&options.noCache, "no-cache", false, "Do not use cache when building the image")
	flags.BoolVar(&options.rm, "rm", true, "Remove intermediate containers after a successful build")
	flags.BoolVar(&options.forceRm, "force-rm", false, "Always remove intermediate containers")
	flags.BoolVarP(&options.quiet, "quiet", "q", false, "Suppress the build output and print image ID on success")
	flags.BoolVar(&options.pull, "pull", false, "Always attempt to pull a newer version of the image")
	flags.StringSliceVar(&options.cacheFrom, "cache-from", []string{}, "Images to consider as cache sources")
	flags.BoolVar(&options.compress, "compress", false, "Compress the build context using gzip")
	flags.StringSliceVar(&options.securityOpt, "security-opt", []string{}, "Security options")
	flags.StringVar(&options.networkMode, "network", "default", "Set the networking mode for the RUN instructions during build")

	command.AddTrustedFlags(flags, true)

	flags.BoolVar(&options.squash, "squash", false, "Squash newly built layers into a single new layer")
	flags.SetAnnotation("squash", "experimental", nil)
	flags.SetAnnotation("squash", "version", []string{"1.25"})

	return cmd
}
Esempio n. 4
0
// Parse parses the specified args for the specified command and generates a Config,
// a HostConfig and returns them with the specified command.
// If the specified args are not valid, it will return an error.
func Parse(cmd *flag.FlagSet, args []string) (*Config, *HostConfig, *flag.FlagSet, error) {
	var (
		// FIXME: use utils.ListOpts for attach and volumes?
		flAttach            = opts.NewListOpts(opts.ValidateAttach)
		flVolumes           = opts.NewListOpts(nil)
		flBlkioWeightDevice = opts.NewWeightdeviceOpt(opts.ValidateWeightDevice)
		flLinks             = opts.NewListOpts(opts.ValidateLink)
		flEnv               = opts.NewListOpts(opts.ValidateEnv)
		flLabels            = opts.NewListOpts(opts.ValidateEnv)
		flDevices           = opts.NewListOpts(opts.ValidateDevice)

		flUlimits = opts.NewUlimitOpt(nil)

		flPublish           = opts.NewListOpts(nil)
		flExpose            = opts.NewListOpts(nil)
		flDNS               = opts.NewListOpts(opts.ValidateIPAddress)
		flDNSSearch         = opts.NewListOpts(opts.ValidateDNSSearch)
		flDNSOptions        = opts.NewListOpts(nil)
		flExtraHosts        = opts.NewListOpts(opts.ValidateExtraHost)
		flVolumesFrom       = opts.NewListOpts(nil)
		flEnvFile           = opts.NewListOpts(nil)
		flCapAdd            = opts.NewListOpts(nil)
		flCapDrop           = opts.NewListOpts(nil)
		flGroupAdd          = opts.NewListOpts(nil)
		flSecurityOpt       = opts.NewListOpts(nil)
		flLabelsFile        = opts.NewListOpts(nil)
		flLoggingOpts       = opts.NewListOpts(nil)
		flPrivileged        = cmd.Bool([]string{"-privileged"}, false, "Give extended privileges to this container")
		flPidMode           = cmd.String([]string{"-pid"}, "", "PID namespace to use")
		flUTSMode           = cmd.String([]string{"-uts"}, "", "UTS namespace to use")
		flPublishAll        = cmd.Bool([]string{"P", "-publish-all"}, false, "Publish all exposed ports to random ports")
		flStdin             = cmd.Bool([]string{"i", "-interactive"}, false, "Keep STDIN open even if not attached")
		flTty               = cmd.Bool([]string{"t", "-tty"}, false, "Allocate a pseudo-TTY")
		flOomKillDisable    = cmd.Bool([]string{"-oom-kill-disable"}, false, "Disable OOM Killer")
		flContainerIDFile   = cmd.String([]string{"-cidfile"}, "", "Write the container ID to the file")
		flEntrypoint        = cmd.String([]string{"-entrypoint"}, "", "Overwrite the default ENTRYPOINT of the image")
		flHostname          = cmd.String([]string{"h", "-hostname"}, "", "Container host name")
		flMemoryString      = cmd.String([]string{"m", "-memory"}, "", "Memory limit")
		flMemoryReservation = cmd.String([]string{"-memory-reservation"}, "", "Memory soft limit")
		flMemorySwap        = cmd.String([]string{"-memory-swap"}, "", "Total memory (memory + swap), '-1' to disable swap")
		flKernelMemory      = cmd.String([]string{"-kernel-memory"}, "", "Kernel memory limit")
		flUser              = cmd.String([]string{"u", "-user"}, "", "Username or UID (format: <name|uid>[:<group|gid>])")
		flWorkingDir        = cmd.String([]string{"w", "-workdir"}, "", "Working directory inside the container")
		flCPUShares         = cmd.Int64([]string{"#c", "-cpu-shares"}, 0, "CPU shares (relative weight)")
		flCPUPeriod         = cmd.Int64([]string{"-cpu-period"}, 0, "Limit CPU CFS (Completely Fair Scheduler) period")
		flCPUQuota          = cmd.Int64([]string{"-cpu-quota"}, 0, "Limit CPU CFS (Completely Fair Scheduler) quota")
		flCpusetCpus        = cmd.String([]string{"-cpuset-cpus"}, "", "CPUs in which to allow execution (0-3, 0,1)")
		flCpusetMems        = cmd.String([]string{"-cpuset-mems"}, "", "MEMs in which to allow execution (0-3, 0,1)")
		flBlkioWeight       = cmd.Uint16([]string{"-blkio-weight"}, 0, "Block IO (relative weight), between 10 and 1000")
		flSwappiness        = cmd.Int64([]string{"-memory-swappiness"}, -1, "Tuning container memory swappiness (0 to 100)")
		flNetMode           = cmd.String([]string{"-net"}, "default", "Set the Network for the container")
		flMacAddress        = cmd.String([]string{"-mac-address"}, "", "Container MAC address (e.g. 92:d0:c6:0a:29:33)")
		flIpcMode           = cmd.String([]string{"-ipc"}, "", "IPC namespace to use")
		flRestartPolicy     = cmd.String([]string{"-restart"}, "no", "Restart policy to apply when a container exits")
		flReadonlyRootfs    = cmd.Bool([]string{"-read-only"}, false, "Mount the container's root filesystem as read only")
		flLoggingDriver     = cmd.String([]string{"-log-driver"}, "", "Logging driver for container")
		flCgroupParent      = cmd.String([]string{"-cgroup-parent"}, "", "Optional parent cgroup for the container")
		flVolumeDriver      = cmd.String([]string{"-volume-driver"}, "", "Optional volume driver for the container")
		flStopSignal        = cmd.String([]string{"-stop-signal"}, signal.DefaultStopSignal, fmt.Sprintf("Signal to stop a container, %v by default", signal.DefaultStopSignal))
		flIsolation         = cmd.String([]string{"-isolation"}, "", "Container isolation level")
		flShmSize           = cmd.String([]string{"-shm-size"}, "", "Size of /dev/shm, default value is 64MB")
	)

	cmd.Var(&flAttach, []string{"a", "-attach"}, "Attach to STDIN, STDOUT or STDERR")
	cmd.Var(&flBlkioWeightDevice, []string{"-blkio-weight-device"}, "Block IO weight (relative device weight)")
	cmd.Var(&flVolumes, []string{"v", "-volume"}, "Bind mount a volume")
	cmd.Var(&flLinks, []string{"-link"}, "Add link to another container")
	cmd.Var(&flDevices, []string{"-device"}, "Add a host device to the container")
	cmd.Var(&flLabels, []string{"l", "-label"}, "Set meta data on a container")
	cmd.Var(&flLabelsFile, []string{"-label-file"}, "Read in a line delimited file of labels")
	cmd.Var(&flEnv, []string{"e", "-env"}, "Set environment variables")
	cmd.Var(&flEnvFile, []string{"-env-file"}, "Read in a file of environment variables")
	cmd.Var(&flPublish, []string{"p", "-publish"}, "Publish a container's port(s) to the host")
	cmd.Var(&flExpose, []string{"-expose"}, "Expose a port or a range of ports")
	cmd.Var(&flDNS, []string{"-dns"}, "Set custom DNS servers")
	cmd.Var(&flDNSSearch, []string{"-dns-search"}, "Set custom DNS search domains")
	cmd.Var(&flDNSOptions, []string{"-dns-opt"}, "Set DNS options")
	cmd.Var(&flExtraHosts, []string{"-add-host"}, "Add a custom host-to-IP mapping (host:ip)")
	cmd.Var(&flVolumesFrom, []string{"-volumes-from"}, "Mount volumes from the specified container(s)")
	cmd.Var(&flCapAdd, []string{"-cap-add"}, "Add Linux capabilities")
	cmd.Var(&flCapDrop, []string{"-cap-drop"}, "Drop Linux capabilities")
	cmd.Var(&flGroupAdd, []string{"-group-add"}, "Add additional groups to join")
	cmd.Var(&flSecurityOpt, []string{"-security-opt"}, "Security Options")
	cmd.Var(flUlimits, []string{"-ulimit"}, "Ulimit options")
	cmd.Var(&flLoggingOpts, []string{"-log-opt"}, "Log driver options")

	cmd.Require(flag.Min, 1)

	if err := cmd.ParseFlags(args, true); err != nil {
		return nil, nil, cmd, err
	}

	var (
		attachStdin  = flAttach.Get("stdin")
		attachStdout = flAttach.Get("stdout")
		attachStderr = flAttach.Get("stderr")
	)

	// Validate the input mac address
	if *flMacAddress != "" {
		if _, err := opts.ValidateMACAddress(*flMacAddress); err != nil {
			return nil, nil, cmd, fmt.Errorf("%s is not a valid mac address", *flMacAddress)
		}
	}
	if *flStdin {
		attachStdin = true
	}
	// If -a is not set attach to the output stdio
	if flAttach.Len() == 0 {
		attachStdout = true
		attachStderr = true
	}

	var err error

	var flMemory int64
	if *flMemoryString != "" {
		flMemory, err = units.RAMInBytes(*flMemoryString)
		if err != nil {
			return nil, nil, cmd, err
		}
	}

	var MemoryReservation int64
	if *flMemoryReservation != "" {
		MemoryReservation, err = units.RAMInBytes(*flMemoryReservation)
		if err != nil {
			return nil, nil, cmd, err
		}
	}

	var memorySwap int64
	if *flMemorySwap != "" {
		if *flMemorySwap == "-1" {
			memorySwap = -1
		} else {
			memorySwap, err = units.RAMInBytes(*flMemorySwap)
			if err != nil {
				return nil, nil, cmd, err
			}
		}
	}

	var KernelMemory int64
	if *flKernelMemory != "" {
		KernelMemory, err = units.RAMInBytes(*flKernelMemory)
		if err != nil {
			return nil, nil, cmd, err
		}
	}

	swappiness := *flSwappiness
	if swappiness != -1 && (swappiness < 0 || swappiness > 100) {
		return nil, nil, cmd, fmt.Errorf("Invalid value: %d. Valid memory swappiness range is 0-100", swappiness)
	}

	var parsedShm *int64
	if *flShmSize != "" {
		shmSize, err := units.RAMInBytes(*flShmSize)
		if err != nil {
			return nil, nil, cmd, err
		}
		parsedShm = &shmSize
	}

	var binds []string
	// add any bind targets to the list of container volumes
	for bind := range flVolumes.GetMap() {
		if arr := volume.SplitN(bind, 2); len(arr) > 1 {
			// after creating the bind mount we want to delete it from the flVolumes values because
			// we do not want bind mounts being committed to image configs
			binds = append(binds, bind)
			flVolumes.Delete(bind)
		}
	}

	var (
		parsedArgs = cmd.Args()
		runCmd     *stringutils.StrSlice
		entrypoint *stringutils.StrSlice
		image      = cmd.Arg(0)
	)
	if len(parsedArgs) > 1 {
		runCmd = stringutils.NewStrSlice(parsedArgs[1:]...)
	}
	if *flEntrypoint != "" {
		entrypoint = stringutils.NewStrSlice(*flEntrypoint)
	}

	var (
		domainname string
		hostname   = *flHostname
		parts      = strings.SplitN(hostname, ".", 2)
	)
	if len(parts) > 1 {
		hostname = parts[0]
		domainname = parts[1]
	}

	ports, portBindings, err := nat.ParsePortSpecs(flPublish.GetAll())
	if err != nil {
		return nil, nil, cmd, err
	}

	// Merge in exposed ports to the map of published ports
	for _, e := range flExpose.GetAll() {
		if strings.Contains(e, ":") {
			return nil, nil, cmd, fmt.Errorf("Invalid port format for --expose: %s", e)
		}
		//support two formats for expose, original format <portnum>/[<proto>] or <startport-endport>/[<proto>]
		proto, port := nat.SplitProtoPort(e)
		//parse the start and end port and create a sequence of ports to expose
		//if expose a port, the start and end port are the same
		start, end, err := parsers.ParsePortRange(port)
		if err != nil {
			return nil, nil, cmd, fmt.Errorf("Invalid range format for --expose: %s, error: %s", e, err)
		}
		for i := start; i <= end; i++ {
			p, err := nat.NewPort(proto, strconv.FormatUint(i, 10))
			if err != nil {
				return nil, nil, cmd, err
			}
			if _, exists := ports[p]; !exists {
				ports[p] = struct{}{}
			}
		}
	}

	// parse device mappings
	deviceMappings := []DeviceMapping{}
	for _, device := range flDevices.GetAll() {
		deviceMapping, err := ParseDevice(device)
		if err != nil {
			return nil, nil, cmd, err
		}
		deviceMappings = append(deviceMappings, deviceMapping)
	}

	// collect all the environment variables for the container
	envVariables, err := readKVStrings(flEnvFile.GetAll(), flEnv.GetAll())
	if err != nil {
		return nil, nil, cmd, err
	}

	// collect all the labels for the container
	labels, err := readKVStrings(flLabelsFile.GetAll(), flLabels.GetAll())
	if err != nil {
		return nil, nil, cmd, err
	}

	ipcMode := IpcMode(*flIpcMode)
	if !ipcMode.Valid() {
		return nil, nil, cmd, fmt.Errorf("--ipc: invalid IPC mode")
	}

	pidMode := PidMode(*flPidMode)
	if !pidMode.Valid() {
		return nil, nil, cmd, fmt.Errorf("--pid: invalid PID mode")
	}

	utsMode := UTSMode(*flUTSMode)
	if !utsMode.Valid() {
		return nil, nil, cmd, fmt.Errorf("--uts: invalid UTS mode")
	}

	restartPolicy, err := ParseRestartPolicy(*flRestartPolicy)
	if err != nil {
		return nil, nil, cmd, err
	}

	loggingOpts, err := parseLoggingOpts(*flLoggingDriver, flLoggingOpts.GetAll())
	if err != nil {
		return nil, nil, cmd, err
	}

	resources := Resources{
		CgroupParent:      *flCgroupParent,
		Memory:            flMemory,
		MemoryReservation: MemoryReservation,
		MemorySwap:        memorySwap,
		MemorySwappiness:  flSwappiness,
		KernelMemory:      KernelMemory,
		CPUShares:         *flCPUShares,
		CPUPeriod:         *flCPUPeriod,
		CpusetCpus:        *flCpusetCpus,
		CpusetMems:        *flCpusetMems,
		CPUQuota:          *flCPUQuota,
		BlkioWeight:       *flBlkioWeight,
		BlkioWeightDevice: flBlkioWeightDevice.GetList(),
		Ulimits:           flUlimits.GetList(),
		Devices:           deviceMappings,
	}

	config := &Config{
		Hostname:     hostname,
		Domainname:   domainname,
		ExposedPorts: ports,
		User:         *flUser,
		Tty:          *flTty,
		// TODO: deprecated, it comes from -n, --networking
		// it's still needed internally to set the network to disabled
		// if e.g. bridge is none in daemon opts, and in inspect
		NetworkDisabled: false,
		OpenStdin:       *flStdin,
		AttachStdin:     attachStdin,
		AttachStdout:    attachStdout,
		AttachStderr:    attachStderr,
		Env:             envVariables,
		Cmd:             runCmd,
		Image:           image,
		Volumes:         flVolumes.GetMap(),
		MacAddress:      *flMacAddress,
		Entrypoint:      entrypoint,
		WorkingDir:      *flWorkingDir,
		Labels:          ConvertKVStringsToMap(labels),
		StopSignal:      *flStopSignal,
	}

	hostConfig := &HostConfig{
		Binds:           binds,
		ContainerIDFile: *flContainerIDFile,
		OomKillDisable:  *flOomKillDisable,
		Privileged:      *flPrivileged,
		PortBindings:    portBindings,
		Links:           flLinks.GetAll(),
		PublishAllPorts: *flPublishAll,
		// Make sure the dns fields are never nil.
		// New containers don't ever have those fields nil,
		// but pre created containers can still have those nil values.
		// See https://github.com/docker/docker/pull/17779
		// for a more detailed explanation on why we don't want that.
		DNS:            flDNS.GetAllOrEmpty(),
		DNSSearch:      flDNSSearch.GetAllOrEmpty(),
		DNSOptions:     flDNSOptions.GetAllOrEmpty(),
		ExtraHosts:     flExtraHosts.GetAll(),
		VolumesFrom:    flVolumesFrom.GetAll(),
		NetworkMode:    NetworkMode(*flNetMode),
		IpcMode:        ipcMode,
		PidMode:        pidMode,
		UTSMode:        utsMode,
		CapAdd:         stringutils.NewStrSlice(flCapAdd.GetAll()...),
		CapDrop:        stringutils.NewStrSlice(flCapDrop.GetAll()...),
		GroupAdd:       flGroupAdd.GetAll(),
		RestartPolicy:  restartPolicy,
		SecurityOpt:    flSecurityOpt.GetAll(),
		ReadonlyRootfs: *flReadonlyRootfs,
		LogConfig:      LogConfig{Type: *flLoggingDriver, Config: loggingOpts},
		VolumeDriver:   *flVolumeDriver,
		Isolation:      IsolationLevel(*flIsolation),
		ShmSize:        parsedShm,
		Resources:      resources,
	}

	// When allocating stdin in attached mode, close stdin at client disconnect
	if config.OpenStdin && config.AttachStdin {
		config.StdinOnce = true
	}
	return config, hostConfig, cmd, nil
}
Esempio n. 5
0
func Parse(cmd *flag.FlagSet, args []string) (*Config, *HostConfig, *flag.FlagSet, error) {
	var (
		// FIXME: use utils.ListOpts for attach and volumes?
		flAttach  = opts.NewListOpts(opts.ValidateAttach)
		flVolumes = opts.NewListOpts(opts.ValidatePath)
		flLinks   = opts.NewListOpts(opts.ValidateLink)
		flEnv     = opts.NewListOpts(opts.ValidateEnv)
		flLabels  = opts.NewListOpts(opts.ValidateEnv)
		flDevices = opts.NewListOpts(opts.ValidatePath)

		ulimits   = make(map[string]*ulimit.Ulimit)
		flUlimits = opts.NewUlimitOpt(ulimits)

		flPublish     = opts.NewListOpts(nil)
		flExpose      = opts.NewListOpts(nil)
		flDns         = opts.NewListOpts(opts.ValidateIPAddress)
		flDnsSearch   = opts.NewListOpts(opts.ValidateDnsSearch)
		flExtraHosts  = opts.NewListOpts(opts.ValidateExtraHost)
		flVolumesFrom = opts.NewListOpts(nil)
		flLxcOpts     = opts.NewListOpts(nil)
		flEnvFile     = opts.NewListOpts(nil)
		flCapAdd      = opts.NewListOpts(nil)
		flCapDrop     = opts.NewListOpts(nil)
		flGroupAdd    = opts.NewListOpts(nil)
		flSecurityOpt = opts.NewListOpts(nil)
		flLabelsFile  = opts.NewListOpts(nil)
		flLoggingOpts = opts.NewListOpts(nil)

		flNetwork         = cmd.Bool([]string{"#n", "#-networking"}, true, "Enable networking for this container")
		flPrivileged      = cmd.Bool([]string{"#privileged", "-privileged"}, false, "Give extended privileges to this container")
		flPidMode         = cmd.String([]string{"-pid"}, "", "PID namespace to use")
		flUTSMode         = cmd.String([]string{"-uts"}, "", "UTS namespace to use")
		flPublishAll      = cmd.Bool([]string{"P", "-publish-all"}, false, "Publish all exposed ports to random ports")
		flStdin           = cmd.Bool([]string{"i", "-interactive"}, false, "Keep STDIN open even if not attached")
		flTty             = cmd.Bool([]string{"t", "-tty"}, false, "Allocate a pseudo-TTY")
		flOomKillDisable  = cmd.Bool([]string{"-oom-kill-disable"}, false, "Disable OOM Killer")
		flSwappinessStr   = cmd.String([]string{"-memory-swappiness"}, "", "Tuning container memory swappiness (0 to 100)")
		flContainerIDFile = cmd.String([]string{"#cidfile", "-cidfile"}, "", "Write the container ID to the file")
		flEntrypoint      = cmd.String([]string{"#entrypoint", "-entrypoint"}, "", "Overwrite the default ENTRYPOINT of the image")
		flHostname        = cmd.String([]string{"h", "-hostname"}, "", "Container host name")
		flMemoryString    = cmd.String([]string{"m", "-memory"}, "", "Memory limit")
		flMemorySwap      = cmd.String([]string{"-memory-swap"}, "", "Total memory (memory + swap), '-1' to disable swap")
		flUser            = cmd.String([]string{"u", "-user"}, "", "Username or UID (format: <name|uid>[:<group|gid>])")
		flWorkingDir      = cmd.String([]string{"w", "-workdir"}, "", "Working directory inside the container")
		flCpuShares       = cmd.Int64([]string{"c", "-cpu-shares"}, 0, "CPU shares (relative weight)")
		flCpuPeriod       = cmd.Int64([]string{"-cpu-period"}, 0, "Limit CPU CFS (Completely Fair Scheduler) period")
		flCpusetCpus      = cmd.String([]string{"#-cpuset", "-cpuset-cpus"}, "", "CPUs in which to allow execution (0-3, 0,1)")
		flCpusetMems      = cmd.String([]string{"-cpuset-mems"}, "", "MEMs in which to allow execution (0-3, 0,1)")
		flCpuQuota        = cmd.Int64([]string{"-cpu-quota"}, 0, "Limit the CPU CFS quota")
		flBlkioWeight     = cmd.Int64([]string{"-blkio-weight"}, 0, "Block IO (relative weight), between 10 and 1000")
		flNetMode         = cmd.String([]string{"-net"}, "default", "Set the Network mode for the container")
		flMacAddress      = cmd.String([]string{"-mac-address"}, "", "Container MAC address (e.g. 92:d0:c6:0a:29:33)")
		flIpcMode         = cmd.String([]string{"-ipc"}, "", "IPC namespace to use")
		flRestartPolicy   = cmd.String([]string{"-restart"}, "no", "Restart policy to apply when a container exits")
		flReadonlyRootfs  = cmd.Bool([]string{"-read-only"}, false, "Mount the container's root filesystem as read only")
		flLoggingDriver   = cmd.String([]string{"-log-driver"}, "", "Logging driver for container")
		flCgroupParent    = cmd.String([]string{"-cgroup-parent"}, "", "Optional parent cgroup for the container")
	)

	cmd.Var(&flAttach, []string{"a", "-attach"}, "Attach to STDIN, STDOUT or STDERR")
	cmd.Var(&flVolumes, []string{"v", "-volume"}, "Bind mount a volume")
	cmd.Var(&flLinks, []string{"#link", "-link"}, "Add link to another container")
	cmd.Var(&flDevices, []string{"-device"}, "Add a host device to the container")
	cmd.Var(&flLabels, []string{"l", "-label"}, "Set meta data on a container")
	cmd.Var(&flLabelsFile, []string{"-label-file"}, "Read in a line delimited file of labels")
	cmd.Var(&flEnv, []string{"e", "-env"}, "Set environment variables")
	cmd.Var(&flEnvFile, []string{"-env-file"}, "Read in a file of environment variables")
	cmd.Var(&flPublish, []string{"p", "-publish"}, "Publish a container's port(s) to the host")
	cmd.Var(&flExpose, []string{"#expose", "-expose"}, "Expose a port or a range of ports")
	cmd.Var(&flDns, []string{"#dns", "-dns"}, "Set custom DNS servers")
	cmd.Var(&flDnsSearch, []string{"-dns-search"}, "Set custom DNS search domains")
	cmd.Var(&flExtraHosts, []string{"-add-host"}, "Add a custom host-to-IP mapping (host:ip)")
	cmd.Var(&flVolumesFrom, []string{"#volumes-from", "-volumes-from"}, "Mount volumes from the specified container(s)")
	cmd.Var(&flLxcOpts, []string{"#lxc-conf", "-lxc-conf"}, "Add custom lxc options")
	cmd.Var(&flCapAdd, []string{"-cap-add"}, "Add Linux capabilities")
	cmd.Var(&flCapDrop, []string{"-cap-drop"}, "Drop Linux capabilities")
	cmd.Var(&flGroupAdd, []string{"-group-add"}, "Add additional groups to join")
	cmd.Var(&flSecurityOpt, []string{"-security-opt"}, "Security Options")
	cmd.Var(flUlimits, []string{"-ulimit"}, "Ulimit options")
	cmd.Var(&flLoggingOpts, []string{"-log-opt"}, "Log driver options")

	expFlags := attachExperimentalFlags(cmd)

	cmd.Require(flag.Min, 1)

	if err := cmd.ParseFlags(args, true); err != nil {
		return nil, nil, cmd, err
	}

	var (
		attachStdin  = flAttach.Get("stdin")
		attachStdout = flAttach.Get("stdout")
		attachStderr = flAttach.Get("stderr")
	)

	netMode, err := parseNetMode(*flNetMode)
	if err != nil {
		return nil, nil, cmd, fmt.Errorf("--net: invalid net mode: %v", err)
	}

	vals := validateNM{
		netMode:      netMode,
		flHostname:   flHostname,
		flLinks:      flLinks,
		flDns:        flDns,
		flExtraHosts: flExtraHosts,
		flMacAddress: flMacAddress,
		flPublish:    flPublish,
		flPublishAll: flPublishAll,
		flExpose:     flExpose,
	}

	if err := validateNetMode(&vals); err != nil {
		return nil, nil, cmd, err
	}

	// Validate the input mac address
	if *flMacAddress != "" {
		if _, err := opts.ValidateMACAddress(*flMacAddress); err != nil {
			return nil, nil, cmd, fmt.Errorf("%s is not a valid mac address", *flMacAddress)
		}
	}
	if *flStdin {
		attachStdin = true
	}
	// If -a is not set attach to the output stdio
	if flAttach.Len() == 0 {
		attachStdout = true
		attachStderr = true
	}

	var flMemory int64
	if *flMemoryString != "" {
		parsedMemory, err := units.RAMInBytes(*flMemoryString)
		if err != nil {
			return nil, nil, cmd, err
		}
		flMemory = parsedMemory
	}

	var MemorySwap int64
	if *flMemorySwap != "" {
		if *flMemorySwap == "-1" {
			MemorySwap = -1
		} else {
			parsedMemorySwap, err := units.RAMInBytes(*flMemorySwap)
			if err != nil {
				return nil, nil, cmd, err
			}
			MemorySwap = parsedMemorySwap
		}
	}

	var parsedSwappiness int64
	var flSwappiness int64

	if *flSwappinessStr != "" {
		parsedSwappiness, err = strconv.ParseInt(*flSwappinessStr, 10, 64)
		if err != nil || parsedSwappiness < 0 || parsedSwappiness > 100 {
			return nil, nil, cmd, fmt.Errorf("invalid value:%s. valid memory swappiness range is 0-100", *flSwappinessStr)
		}
		flSwappiness = parsedSwappiness
	} else {
		flSwappiness = -1
	}

	var binds []string
	// add any bind targets to the list of container volumes
	for bind := range flVolumes.GetMap() {
		if arr := strings.Split(bind, ":"); len(arr) > 1 {
			if arr[1] == "/" {
				return nil, nil, cmd, fmt.Errorf("Invalid bind mount: destination can't be '/'")
			}
			// after creating the bind mount we want to delete it from the flVolumes values because
			// we do not want bind mounts being committed to image configs
			binds = append(binds, bind)
			flVolumes.Delete(bind)
		} else if bind == "/" {
			return nil, nil, cmd, fmt.Errorf("Invalid volume: path can't be '/'")
		}
	}

	var (
		parsedArgs = cmd.Args()
		runCmd     *Command
		entrypoint *Entrypoint
		image      = cmd.Arg(0)
	)
	if len(parsedArgs) > 1 {
		runCmd = NewCommand(parsedArgs[1:]...)
	}
	if *flEntrypoint != "" {
		entrypoint = NewEntrypoint(*flEntrypoint)
	}

	lc, err := parseKeyValueOpts(flLxcOpts)
	if err != nil {
		return nil, nil, cmd, err
	}
	lxcConf := NewLxcConfig(lc)

	var (
		domainname string
		hostname   = *flHostname
		parts      = strings.SplitN(hostname, ".", 2)
	)
	if len(parts) > 1 {
		hostname = parts[0]
		domainname = parts[1]
	}

	ports, portBindings, err := nat.ParsePortSpecs(flPublish.GetAll())
	if err != nil {
		return nil, nil, cmd, err
	}

	// Merge in exposed ports to the map of published ports
	for _, e := range flExpose.GetAll() {
		if strings.Contains(e, ":") {
			return nil, nil, cmd, fmt.Errorf("Invalid port format for --expose: %s", e)
		}
		//support two formats for expose, original format <portnum>/[<proto>] or <startport-endport>/[<proto>]
		proto, port := nat.SplitProtoPort(e)
		//parse the start and end port and create a sequence of ports to expose
		//if expose a port, the start and end port are the same
		start, end, err := parsers.ParsePortRange(port)
		if err != nil {
			return nil, nil, cmd, fmt.Errorf("Invalid range format for --expose: %s, error: %s", e, err)
		}
		for i := start; i <= end; i++ {
			p := nat.NewPort(proto, strconv.FormatUint(i, 10))
			if _, exists := ports[p]; !exists {
				ports[p] = struct{}{}
			}
		}
	}

	// parse device mappings
	deviceMappings := []DeviceMapping{}
	for _, device := range flDevices.GetAll() {
		deviceMapping, err := ParseDevice(device)
		if err != nil {
			return nil, nil, cmd, err
		}
		deviceMappings = append(deviceMappings, deviceMapping)
	}

	// collect all the environment variables for the container
	envVariables, err := readKVStrings(flEnvFile.GetAll(), flEnv.GetAll())
	if err != nil {
		return nil, nil, cmd, err
	}

	// collect all the labels for the container
	labels, err := readKVStrings(flLabelsFile.GetAll(), flLabels.GetAll())
	if err != nil {
		return nil, nil, cmd, err
	}

	ipcMode := IpcMode(*flIpcMode)
	if !ipcMode.Valid() {
		return nil, nil, cmd, fmt.Errorf("--ipc: invalid IPC mode")
	}

	pidMode := PidMode(*flPidMode)
	if !pidMode.Valid() {
		return nil, nil, cmd, fmt.Errorf("--pid: invalid PID mode")
	}

	utsMode := UTSMode(*flUTSMode)
	if !utsMode.Valid() {
		return nil, nil, cmd, fmt.Errorf("--uts: invalid UTS mode")
	}

	restartPolicy, err := ParseRestartPolicy(*flRestartPolicy)
	if err != nil {
		return nil, nil, cmd, err
	}

	loggingOpts, err := parseLoggingOpts(*flLoggingDriver, flLoggingOpts.GetAll())
	if err != nil {
		return nil, nil, cmd, err
	}

	config := &Config{
		Hostname:        hostname,
		Domainname:      domainname,
		ExposedPorts:    ports,
		User:            *flUser,
		Tty:             *flTty,
		NetworkDisabled: !*flNetwork,
		OpenStdin:       *flStdin,
		AttachStdin:     attachStdin,
		AttachStdout:    attachStdout,
		AttachStderr:    attachStderr,
		Env:             envVariables,
		Cmd:             runCmd,
		Image:           image,
		Volumes:         flVolumes.GetMap(),
		MacAddress:      *flMacAddress,
		Entrypoint:      entrypoint,
		WorkingDir:      *flWorkingDir,
		Labels:          convertKVStringsToMap(labels),
	}

	hostConfig := &HostConfig{
		Binds:            binds,
		ContainerIDFile:  *flContainerIDFile,
		LxcConf:          lxcConf,
		Memory:           flMemory,
		MemorySwap:       MemorySwap,
		CpuShares:        *flCpuShares,
		CpuPeriod:        *flCpuPeriod,
		CpusetCpus:       *flCpusetCpus,
		CpusetMems:       *flCpusetMems,
		CpuQuota:         *flCpuQuota,
		BlkioWeight:      *flBlkioWeight,
		OomKillDisable:   *flOomKillDisable,
		MemorySwappiness: flSwappiness,
		Privileged:       *flPrivileged,
		PortBindings:     portBindings,
		Links:            flLinks.GetAll(),
		PublishAllPorts:  *flPublishAll,
		Dns:              flDns.GetAll(),
		DnsSearch:        flDnsSearch.GetAll(),
		ExtraHosts:       flExtraHosts.GetAll(),
		VolumesFrom:      flVolumesFrom.GetAll(),
		NetworkMode:      netMode,
		IpcMode:          ipcMode,
		PidMode:          pidMode,
		UTSMode:          utsMode,
		Devices:          deviceMappings,
		CapAdd:           NewCapList(flCapAdd.GetAll()),
		CapDrop:          NewCapList(flCapDrop.GetAll()),
		GroupAdd:         flGroupAdd.GetAll(),
		RestartPolicy:    restartPolicy,
		SecurityOpt:      flSecurityOpt.GetAll(),
		ReadonlyRootfs:   *flReadonlyRootfs,
		Ulimits:          flUlimits.GetList(),
		LogConfig:        LogConfig{Type: *flLoggingDriver, Config: loggingOpts},
		CgroupParent:     *flCgroupParent,
	}

	applyExperimentalFlags(expFlags, config, hostConfig)

	// When allocating stdin in attached mode, close stdin at client disconnect
	if config.OpenStdin && config.AttachStdin {
		config.StdinOnce = true
	}
	return config, hostConfig, cmd, nil
}
Esempio n. 6
0
// CmdBuild builds a new image from the source code at a given path.
//
// If '-' is provided instead of a path or URL, Docker will build an image from either a Dockerfile or tar archive read from STDIN.
//
// Usage: docker build [OPTIONS] PATH | URL | -
func (cli *DockerCli) CmdBuild(args ...string) error {
	cmd := Cli.Subcmd("build", []string{"PATH | URL | -"}, Cli.DockerCommands["build"].Description, true)
	flTags := opts.NewListOpts(validateTag)
	cmd.Var(&flTags, []string{"t", "-tag"}, "Name and optionally a tag in the 'name:tag' format")
	suppressOutput := cmd.Bool([]string{"q", "-quiet"}, false, "Suppress the verbose output generated by the containers")
	noCache := cmd.Bool([]string{"#no-cache", "-no-cache"}, false, "Do not use cache when building the image")
	rm := cmd.Bool([]string{"#rm", "-rm"}, true, "Remove intermediate containers after a successful build")
	forceRm := cmd.Bool([]string{"-force-rm"}, false, "Always remove intermediate containers")
	pull := cmd.Bool([]string{"-pull"}, false, "Always attempt to pull a newer version of the image")
	dockerfileName := cmd.String([]string{"f", "-file"}, "", "Name of the Dockerfile (Default is 'PATH/Dockerfile')")
	flMemoryString := cmd.String([]string{"m", "-memory"}, "", "Memory limit")
	flMemorySwap := cmd.String([]string{"-memory-swap"}, "", "Total memory (memory + swap), '-1' to disable swap")
	flCPUShares := cmd.Int64([]string{"#c", "-cpu-shares"}, 0, "CPU shares (relative weight)")
	flCPUPeriod := cmd.Int64([]string{"-cpu-period"}, 0, "Limit the CPU CFS (Completely Fair Scheduler) period")
	flCPUQuota := cmd.Int64([]string{"-cpu-quota"}, 0, "Limit the CPU CFS (Completely Fair Scheduler) quota")
	flCPUSetCpus := cmd.String([]string{"-cpuset-cpus"}, "", "CPUs in which to allow execution (0-3, 0,1)")
	flCPUSetMems := cmd.String([]string{"-cpuset-mems"}, "", "MEMs in which to allow execution (0-3, 0,1)")
	flCgroupParent := cmd.String([]string{"-cgroup-parent"}, "", "Optional parent cgroup for the container")
	flBuildArg := opts.NewListOpts(opts.ValidateEnv)
	cmd.Var(&flBuildArg, []string{"-build-arg"}, "Set build-time variables")

	ulimits := make(map[string]*ulimit.Ulimit)
	flUlimits := opts.NewUlimitOpt(&ulimits)
	cmd.Var(flUlimits, []string{"-ulimit"}, "Ulimit options")

	cmd.Require(flag.Exact, 1)

	// For trusted pull on "FROM <image>" instruction.
	addTrustedFlags(cmd, true)

	cmd.ParseFlags(args, true)

	var (
		context  io.ReadCloser
		isRemote bool
		err      error
	)

	_, err = exec.LookPath("git")
	hasGit := err == nil

	specifiedContext := cmd.Arg(0)

	var (
		contextDir    string
		tempDir       string
		relDockerfile string
	)

	switch {
	case specifiedContext == "-":
		tempDir, relDockerfile, err = getContextFromReader(cli.in, *dockerfileName)
	case urlutil.IsGitURL(specifiedContext) && hasGit:
		tempDir, relDockerfile, err = getContextFromGitURL(specifiedContext, *dockerfileName)
	case urlutil.IsURL(specifiedContext):
		tempDir, relDockerfile, err = getContextFromURL(cli.out, specifiedContext, *dockerfileName)
	default:
		contextDir, relDockerfile, err = getContextFromLocalDir(specifiedContext, *dockerfileName)
	}

	if err != nil {
		return fmt.Errorf("unable to prepare context: %s", err)
	}

	if tempDir != "" {
		defer os.RemoveAll(tempDir)
		contextDir = tempDir
	}

	// Resolve the FROM lines in the Dockerfile to trusted digest references
	// using Notary. On a successful build, we must tag the resolved digests
	// to the original name specified in the Dockerfile.
	newDockerfile, resolvedTags, err := rewriteDockerfileFrom(filepath.Join(contextDir, relDockerfile), cli.trustedReference)
	if err != nil {
		return fmt.Errorf("unable to process Dockerfile: %v", err)
	}
	defer newDockerfile.Close()

	// And canonicalize dockerfile name to a platform-independent one
	relDockerfile, err = archive.CanonicalTarNameForPath(relDockerfile)
	if err != nil {
		return fmt.Errorf("cannot canonicalize dockerfile path %s: %v", relDockerfile, err)
	}

	f, err := os.Open(filepath.Join(contextDir, ".dockerignore"))
	if err != nil && !os.IsNotExist(err) {
		return err
	}

	var excludes []string
	if err == nil {
		excludes, err = utils.ReadDockerIgnore(f)
		if err != nil {
			return err
		}
	}

	if err := utils.ValidateContextDirectory(contextDir, excludes); err != nil {
		return fmt.Errorf("Error checking context: '%s'.", err)
	}

	// If .dockerignore mentions .dockerignore or the Dockerfile
	// then make sure we send both files over to the daemon
	// because Dockerfile is, obviously, needed no matter what, and
	// .dockerignore is needed to know if either one needs to be
	// removed.  The deamon will remove them for us, if needed, after it
	// parses the Dockerfile. Ignore errors here, as they will have been
	// caught by ValidateContextDirectory above.
	var includes = []string{"."}
	keepThem1, _ := fileutils.Matches(".dockerignore", excludes)
	keepThem2, _ := fileutils.Matches(relDockerfile, excludes)
	if keepThem1 || keepThem2 {
		includes = append(includes, ".dockerignore", relDockerfile)
	}

	context, err = archive.TarWithOptions(contextDir, &archive.TarOptions{
		Compression:     archive.Uncompressed,
		ExcludePatterns: excludes,
		IncludeFiles:    includes,
	})
	if err != nil {
		return err
	}

	// Wrap the tar archive to replace the Dockerfile entry with the rewritten
	// Dockerfile which uses trusted pulls.
	context = replaceDockerfileTarWrapper(context, newDockerfile, relDockerfile)

	// Setup an upload progress bar
	// FIXME: ProgressReader shouldn't be this annoying to use
	sf := streamformatter.NewStreamFormatter()
	var body io.Reader = progressreader.New(progressreader.Config{
		In:        context,
		Out:       cli.out,
		Formatter: sf,
		NewLines:  true,
		ID:        "",
		Action:    "Sending build context to Docker daemon",
	})

	var memory int64
	if *flMemoryString != "" {
		parsedMemory, err := units.RAMInBytes(*flMemoryString)
		if err != nil {
			return err
		}
		memory = parsedMemory
	}

	var memorySwap int64
	if *flMemorySwap != "" {
		if *flMemorySwap == "-1" {
			memorySwap = -1
		} else {
			parsedMemorySwap, err := units.RAMInBytes(*flMemorySwap)
			if err != nil {
				return err
			}
			memorySwap = parsedMemorySwap
		}
	}

	// Send the build context
	v := url.Values{
		"t": flTags.GetAll(),
	}
	if *suppressOutput {
		v.Set("q", "1")
	}
	if isRemote {
		v.Set("remote", cmd.Arg(0))
	}
	if *noCache {
		v.Set("nocache", "1")
	}
	if *rm {
		v.Set("rm", "1")
	} else {
		v.Set("rm", "0")
	}

	if *forceRm {
		v.Set("forcerm", "1")
	}

	if *pull {
		v.Set("pull", "1")
	}

	v.Set("cpusetcpus", *flCPUSetCpus)
	v.Set("cpusetmems", *flCPUSetMems)
	v.Set("cpushares", strconv.FormatInt(*flCPUShares, 10))
	v.Set("cpuquota", strconv.FormatInt(*flCPUQuota, 10))
	v.Set("cpuperiod", strconv.FormatInt(*flCPUPeriod, 10))
	v.Set("memory", strconv.FormatInt(memory, 10))
	v.Set("memswap", strconv.FormatInt(memorySwap, 10))
	v.Set("cgroupparent", *flCgroupParent)

	v.Set("dockerfile", relDockerfile)

	ulimitsVar := flUlimits.GetList()
	ulimitsJSON, err := json.Marshal(ulimitsVar)
	if err != nil {
		return err
	}
	v.Set("ulimits", string(ulimitsJSON))

	// collect all the build-time environment variables for the container
	buildArgs := runconfig.ConvertKVStringsToMap(flBuildArg.GetAll())
	buildArgsJSON, err := json.Marshal(buildArgs)
	if err != nil {
		return err
	}
	v.Set("buildargs", string(buildArgsJSON))

	headers := http.Header(make(map[string][]string))
	buf, err := json.Marshal(cli.configFile.AuthConfigs)
	if err != nil {
		return err
	}
	headers.Add("X-Registry-Config", base64.URLEncoding.EncodeToString(buf))
	headers.Set("Content-Type", "application/tar")

	sopts := &streamOpts{
		rawTerminal: true,
		in:          body,
		out:         cli.out,
		headers:     headers,
	}

	serverResp, err := cli.stream("POST", fmt.Sprintf("/build?%s", v.Encode()), sopts)

	// Windows: show error message about modified file permissions.
	if runtime.GOOS == "windows" {
		h, err := httputils.ParseServerHeader(serverResp.header.Get("Server"))
		if err == nil {
			if h.OS != "windows" {
				fmt.Fprintln(cli.err, `SECURITY WARNING: You are building a Docker image from Windows against a non-Windows Docker host. All files and directories added to build context will have '-rwxr-xr-x' permissions. It is recommended to double check and reset permissions for sensitive files and directories.`)
			}
		}
	}

	if jerr, ok := err.(*jsonmessage.JSONError); ok {
		// If no error code is set, default to 1
		if jerr.Code == 0 {
			jerr.Code = 1
		}
		return Cli.StatusError{Status: jerr.Message, StatusCode: jerr.Code}
	}

	if err != nil {
		return err
	}

	// Since the build was successful, now we must tag any of the resolved
	// images from the above Dockerfile rewrite.
	for _, resolved := range resolvedTags {
		if err := cli.tagTrusted(resolved.repoInfo, resolved.digestRef, resolved.tagRef); err != nil {
			return err
		}
	}

	return nil
}
Esempio n. 7
0
// CmdBuild builds a new image from the source code at a given path.
//
// If '-' is provided instead of a path or URL, Docker will build an image from either a Dockerfile or tar archive read from STDIN.
//
// Usage: docker build [OPTIONS] PATH | URL | -
func (cli *DockerCli) CmdBuild(args ...string) error {
	cmd := Cli.Subcmd("build", []string{"PATH | URL | -"}, Cli.DockerCommands["build"].Description, true)
	flTags := opts.NewListOpts(validateTag)
	cmd.Var(&flTags, []string{"t", "-tag"}, "Name and optionally a tag in the 'name:tag' format")
	suppressOutput := cmd.Bool([]string{"q", "-quiet"}, false, "Suppress the verbose output generated by the containers")
	noCache := cmd.Bool([]string{"-no-cache"}, false, "Do not use cache when building the image")
	rm := cmd.Bool([]string{"-rm"}, true, "Remove intermediate containers after a successful build")
	forceRm := cmd.Bool([]string{"-force-rm"}, false, "Always remove intermediate containers")
	pull := cmd.Bool([]string{"-pull"}, false, "Always attempt to pull a newer version of the image")
	dockerfileName := cmd.String([]string{"f", "-file"}, "", "Name of the Dockerfile (Default is 'PATH/Dockerfile')")
	flMemoryString := cmd.String([]string{"m", "-memory"}, "", "Memory limit")
	flMemorySwap := cmd.String([]string{"-memory-swap"}, "", "Total memory (memory + swap), '-1' to disable swap")
	flShmSize := cmd.String([]string{"-shm-size"}, "", "Size of /dev/shm, default value is 64MB")
	flCPUShares := cmd.Int64([]string{"#c", "-cpu-shares"}, 0, "CPU shares (relative weight)")
	flCPUPeriod := cmd.Int64([]string{"-cpu-period"}, 0, "Limit the CPU CFS (Completely Fair Scheduler) period")
	flCPUQuota := cmd.Int64([]string{"-cpu-quota"}, 0, "Limit the CPU CFS (Completely Fair Scheduler) quota")
	flCPUSetCpus := cmd.String([]string{"-cpuset-cpus"}, "", "CPUs in which to allow execution (0-3, 0,1)")
	flCPUSetMems := cmd.String([]string{"-cpuset-mems"}, "", "MEMs in which to allow execution (0-3, 0,1)")
	flCgroupParent := cmd.String([]string{"-cgroup-parent"}, "", "Optional parent cgroup for the container")
	flBuildArg := opts.NewListOpts(opts.ValidateEnv)
	cmd.Var(&flBuildArg, []string{"-build-arg"}, "Set build-time variables")
	isolation := cmd.String([]string{"-isolation"}, "", "Container isolation level")

	ulimits := make(map[string]*ulimit.Ulimit)
	flUlimits := opts.NewUlimitOpt(&ulimits)
	cmd.Var(flUlimits, []string{"-ulimit"}, "Ulimit options")

	cmd.Require(flag.Exact, 1)

	// For trusted pull on "FROM <image>" instruction.
	addTrustedFlags(cmd, true)

	cmd.ParseFlags(args, true)

	var (
		context  io.ReadCloser
		isRemote bool
		err      error
	)

	_, err = exec.LookPath("git")
	hasGit := err == nil

	specifiedContext := cmd.Arg(0)

	var (
		contextDir    string
		tempDir       string
		relDockerfile string
	)

	switch {
	case specifiedContext == "-":
		tempDir, relDockerfile, err = getContextFromReader(cli.in, *dockerfileName)
	case urlutil.IsGitURL(specifiedContext) && hasGit:
		tempDir, relDockerfile, err = getContextFromGitURL(specifiedContext, *dockerfileName)
	case urlutil.IsURL(specifiedContext):
		tempDir, relDockerfile, err = getContextFromURL(cli.out, specifiedContext, *dockerfileName)
	default:
		contextDir, relDockerfile, err = getContextFromLocalDir(specifiedContext, *dockerfileName)
	}

	if err != nil {
		return fmt.Errorf("unable to prepare context: %s", err)
	}

	if tempDir != "" {
		defer os.RemoveAll(tempDir)
		contextDir = tempDir
	}

	// Resolve the FROM lines in the Dockerfile to trusted digest references
	// using Notary. On a successful build, we must tag the resolved digests
	// to the original name specified in the Dockerfile.
	newDockerfile, resolvedTags, err := rewriteDockerfileFrom(filepath.Join(contextDir, relDockerfile), cli.trustedReference)
	if err != nil {
		return fmt.Errorf("unable to process Dockerfile: %v", err)
	}
	defer newDockerfile.Close()

	// And canonicalize dockerfile name to a platform-independent one
	relDockerfile, err = archive.CanonicalTarNameForPath(relDockerfile)
	if err != nil {
		return fmt.Errorf("cannot canonicalize dockerfile path %s: %v", relDockerfile, err)
	}

	f, err := os.Open(filepath.Join(contextDir, ".dockerignore"))
	if err != nil && !os.IsNotExist(err) {
		return err
	}

	var excludes []string
	if err == nil {
		excludes, err = dockerignore.ReadAll(f)
		if err != nil {
			return err
		}
	}

	if err := utils.ValidateContextDirectory(contextDir, excludes); err != nil {
		return fmt.Errorf("Error checking context: '%s'.", err)
	}

	// If .dockerignore mentions .dockerignore or the Dockerfile
	// then make sure we send both files over to the daemon
	// because Dockerfile is, obviously, needed no matter what, and
	// .dockerignore is needed to know if either one needs to be
	// removed. The daemon will remove them for us, if needed, after it
	// parses the Dockerfile. Ignore errors here, as they will have been
	// caught by ValidateContextDirectory above.
	var includes = []string{"."}
	keepThem1, _ := fileutils.Matches(".dockerignore", excludes)
	keepThem2, _ := fileutils.Matches(relDockerfile, excludes)
	if keepThem1 || keepThem2 {
		includes = append(includes, ".dockerignore", relDockerfile)
	}

	context, err = archive.TarWithOptions(contextDir, &archive.TarOptions{
		Compression:     archive.Uncompressed,
		ExcludePatterns: excludes,
		IncludeFiles:    includes,
	})
	if err != nil {
		return err
	}

	// Wrap the tar archive to replace the Dockerfile entry with the rewritten
	// Dockerfile which uses trusted pulls.
	context = replaceDockerfileTarWrapper(context, newDockerfile, relDockerfile)

	// Setup an upload progress bar
	progressOutput := streamformatter.NewStreamFormatter().NewProgressOutput(cli.out, true)

	var body io.Reader = progress.NewProgressReader(context, progressOutput, 0, "", "Sending build context to Docker daemon")

	var memory int64
	if *flMemoryString != "" {
		parsedMemory, err := units.RAMInBytes(*flMemoryString)
		if err != nil {
			return err
		}
		memory = parsedMemory
	}

	var memorySwap int64
	if *flMemorySwap != "" {
		if *flMemorySwap == "-1" {
			memorySwap = -1
		} else {
			parsedMemorySwap, err := units.RAMInBytes(*flMemorySwap)
			if err != nil {
				return err
			}
			memorySwap = parsedMemorySwap
		}
	}

	var remoteContext string
	if isRemote {
		remoteContext = cmd.Arg(0)
	}

	options := types.ImageBuildOptions{
		Context:        body,
		Memory:         memory,
		MemorySwap:     memorySwap,
		Tags:           flTags.GetAll(),
		SuppressOutput: *suppressOutput,
		RemoteContext:  remoteContext,
		NoCache:        *noCache,
		Remove:         *rm,
		ForceRemove:    *forceRm,
		PullParent:     *pull,
		Isolation:      *isolation,
		CPUSetCPUs:     *flCPUSetCpus,
		CPUSetMems:     *flCPUSetMems,
		CPUShares:      *flCPUShares,
		CPUQuota:       *flCPUQuota,
		CPUPeriod:      *flCPUPeriod,
		CgroupParent:   *flCgroupParent,
		ShmSize:        *flShmSize,
		Dockerfile:     relDockerfile,
		Ulimits:        flUlimits.GetList(),
		BuildArgs:      flBuildArg.GetAll(),
		AuthConfigs:    cli.configFile.AuthConfigs,
	}

	response, err := cli.client.ImageBuild(options)
	if err != nil {
		return err
	}

	err = jsonmessage.DisplayJSONMessagesStream(response.Body, cli.out, cli.outFd, cli.isTerminalOut)
	if err != nil {
		if jerr, ok := err.(*jsonmessage.JSONError); ok {
			// If no error code is set, default to 1
			if jerr.Code == 0 {
				jerr.Code = 1
			}
			return Cli.StatusError{Status: jerr.Message, StatusCode: jerr.Code}
		}
	}

	// Windows: show error message about modified file permissions.
	if response.OSType == "windows" {
		fmt.Fprintln(cli.err, `SECURITY WARNING: You are building a Docker image from Windows against a non-Windows Docker host. All files and directories added to build context will have '-rwxr-xr-x' permissions. It is recommended to double check and reset permissions for sensitive files and directories.`)
	}

	// Since the build was successful, now we must tag any of the resolved
	// images from the above Dockerfile rewrite.
	for _, resolved := range resolvedTags {
		if err := cli.tagTrusted(resolved.digestRef, resolved.tagRef); err != nil {
			return err
		}
	}

	return nil
}
Esempio n. 8
0
File: build.go Progetto: reem/docker
// CmdBuild builds a new image from the source code at a given path.
//
// If '-' is provided instead of a path or URL, Docker will build an image from either a Dockerfile or tar archive read from STDIN.
//
// Usage: docker build [OPTIONS] PATH | URL | -
func (cli *DockerCli) CmdBuild(args ...string) error {
	cmd := Cli.Subcmd("build", []string{"PATH | URL | -"}, "Build a new image from the source code at PATH", true)
	tag := cmd.String([]string{"t", "-tag"}, "", "Repository name (and optionally a tag) for the image")
	suppressOutput := cmd.Bool([]string{"q", "-quiet"}, false, "Suppress the verbose output generated by the containers")
	noCache := cmd.Bool([]string{"#no-cache", "-no-cache"}, false, "Do not use cache when building the image")
	rm := cmd.Bool([]string{"#rm", "-rm"}, true, "Remove intermediate containers after a successful build")
	forceRm := cmd.Bool([]string{"-force-rm"}, false, "Always remove intermediate containers")
	pull := cmd.Bool([]string{"-pull"}, false, "Always attempt to pull a newer version of the image")
	dockerfileName := cmd.String([]string{"f", "-file"}, "", "Name of the Dockerfile (Default is 'PATH/Dockerfile')")
	flMemoryString := cmd.String([]string{"m", "-memory"}, "", "Memory limit")
	flMemorySwap := cmd.String([]string{"-memory-swap"}, "", "Total memory (memory + swap), '-1' to disable swap")
	flCPUShares := cmd.Int64([]string{"c", "-cpu-shares"}, 0, "CPU shares (relative weight)")
	flCpuPeriod := cmd.Int64([]string{"-cpu-period"}, 0, "Limit the CPU CFS (Completely Fair Scheduler) period")
	flCpuQuota := cmd.Int64([]string{"-cpu-quota"}, 0, "Limit the CPU CFS (Completely Fair Scheduler) quota")
	flCPUSetCpus := cmd.String([]string{"-cpuset-cpus"}, "", "CPUs in which to allow execution (0-3, 0,1)")
	flCPUSetMems := cmd.String([]string{"-cpuset-mems"}, "", "MEMs in which to allow execution (0-3, 0,1)")
	flCgroupParent := cmd.String([]string{"-cgroup-parent"}, "", "Optional parent cgroup for the container")

	ulimits := make(map[string]*ulimit.Ulimit)
	flUlimits := opts.NewUlimitOpt(&ulimits)
	cmd.Var(flUlimits, []string{"-ulimit"}, "Ulimit options")

	cmd.Require(flag.Exact, 1)

	cmd.ParseFlags(args, true)

	var (
		context  archive.Archive
		isRemote bool
		err      error
	)

	_, err = exec.LookPath("git")
	hasGit := err == nil
	if cmd.Arg(0) == "-" {
		// As a special case, 'docker build -' will build from either an empty context with the
		// contents of stdin as a Dockerfile, or a tar-ed context from stdin.
		buf := bufio.NewReader(cli.in)
		magic, err := buf.Peek(tarHeaderSize)
		if err != nil && err != io.EOF {
			return fmt.Errorf("failed to peek context header from STDIN: %v", err)
		}
		if !archive.IsArchive(magic) {
			dockerfile, err := ioutil.ReadAll(buf)
			if err != nil {
				return fmt.Errorf("failed to read Dockerfile from STDIN: %v", err)
			}

			// -f option has no meaning when we're reading it from stdin,
			// so just use our default Dockerfile name
			*dockerfileName = api.DefaultDockerfileName
			context, err = archive.Generate(*dockerfileName, string(dockerfile))
		} else {
			context = ioutil.NopCloser(buf)
		}
	} else if urlutil.IsURL(cmd.Arg(0)) && (!urlutil.IsGitURL(cmd.Arg(0)) || !hasGit) {
		isRemote = true
	} else {
		root := cmd.Arg(0)
		if urlutil.IsGitURL(root) {
			root, err = utils.GitClone(root)
			if err != nil {
				return err
			}
			defer os.RemoveAll(root)
		}
		if _, err := os.Stat(root); err != nil {
			return err
		}

		absRoot, err := filepath.Abs(root)
		if err != nil {
			return err
		}

		filename := *dockerfileName // path to Dockerfile

		if *dockerfileName == "" {
			// No -f/--file was specified so use the default
			*dockerfileName = api.DefaultDockerfileName
			filename = filepath.Join(absRoot, *dockerfileName)

			// Just to be nice ;-) look for 'dockerfile' too but only
			// use it if we found it, otherwise ignore this check
			if _, err = os.Lstat(filename); os.IsNotExist(err) {
				tmpFN := path.Join(absRoot, strings.ToLower(*dockerfileName))
				if _, err = os.Lstat(tmpFN); err == nil {
					*dockerfileName = strings.ToLower(*dockerfileName)
					filename = tmpFN
				}
			}
		}

		origDockerfile := *dockerfileName // used for error msg
		if filename, err = filepath.Abs(filename); err != nil {
			return err
		}

		// Verify that 'filename' is within the build context
		filename, err = symlink.FollowSymlinkInScope(filename, absRoot)
		if err != nil {
			return fmt.Errorf("The Dockerfile (%s) must be within the build context (%s)", origDockerfile, root)
		}

		// Now reset the dockerfileName to be relative to the build context
		*dockerfileName, err = filepath.Rel(absRoot, filename)
		if err != nil {
			return err
		}
		// And canonicalize dockerfile name to a platform-independent one
		*dockerfileName, err = archive.CanonicalTarNameForPath(*dockerfileName)
		if err != nil {
			return fmt.Errorf("Cannot canonicalize dockerfile path %s: %v", *dockerfileName, err)
		}

		if _, err = os.Lstat(filename); os.IsNotExist(err) {
			return fmt.Errorf("Cannot locate Dockerfile: %s", origDockerfile)
		}
		var includes = []string{"."}

		excludes, err := utils.ReadDockerIgnore(path.Join(root, ".dockerignore"))
		if err != nil {
			return err
		}

		// If .dockerignore mentions .dockerignore or the Dockerfile
		// then make sure we send both files over to the daemon
		// because Dockerfile is, obviously, needed no matter what, and
		// .dockerignore is needed to know if either one needs to be
		// removed.  The deamon will remove them for us, if needed, after it
		// parses the Dockerfile.
		keepThem1, _ := fileutils.Matches(".dockerignore", excludes)
		keepThem2, _ := fileutils.Matches(*dockerfileName, excludes)
		if keepThem1 || keepThem2 {
			includes = append(includes, ".dockerignore", *dockerfileName)
		}

		if err := utils.ValidateContextDirectory(root, excludes); err != nil {
			return fmt.Errorf("Error checking context: '%s'.", err)
		}
		options := &archive.TarOptions{
			Compression:     archive.Uncompressed,
			ExcludePatterns: excludes,
			IncludeFiles:    includes,
		}
		context, err = archive.TarWithOptions(root, options)
		if err != nil {
			return err
		}
	}

	var body io.Reader
	// Setup an upload progress bar
	// FIXME: ProgressReader shouldn't be this annoying to use
	if context != nil {
		sf := streamformatter.NewStreamFormatter()
		body = progressreader.New(progressreader.Config{
			In:        context,
			Out:       cli.out,
			Formatter: sf,
			NewLines:  true,
			ID:        "",
			Action:    "Sending build context to Docker daemon",
		})
	}

	var memory int64
	if *flMemoryString != "" {
		parsedMemory, err := units.RAMInBytes(*flMemoryString)
		if err != nil {
			return err
		}
		memory = parsedMemory
	}

	var memorySwap int64
	if *flMemorySwap != "" {
		if *flMemorySwap == "-1" {
			memorySwap = -1
		} else {
			parsedMemorySwap, err := units.RAMInBytes(*flMemorySwap)
			if err != nil {
				return err
			}
			memorySwap = parsedMemorySwap
		}
	}
	// Send the build context
	v := &url.Values{}

	//Check if the given image name can be resolved
	if *tag != "" {
		repository, tag := parsers.ParseRepositoryTag(*tag)
		if err := registry.ValidateRepositoryName(repository); err != nil {
			return err
		}
		if len(tag) > 0 {
			if err := tags.ValidateTagName(tag); err != nil {
				return err
			}
		}
	}

	v.Set("t", *tag)

	if *suppressOutput {
		v.Set("q", "1")
	}
	if isRemote {
		v.Set("remote", cmd.Arg(0))
	}
	if *noCache {
		v.Set("nocache", "1")
	}
	if *rm {
		v.Set("rm", "1")
	} else {
		v.Set("rm", "0")
	}

	if *forceRm {
		v.Set("forcerm", "1")
	}

	if *pull {
		v.Set("pull", "1")
	}

	v.Set("cpusetcpus", *flCPUSetCpus)
	v.Set("cpusetmems", *flCPUSetMems)
	v.Set("cpushares", strconv.FormatInt(*flCPUShares, 10))
	v.Set("cpuquota", strconv.FormatInt(*flCpuQuota, 10))
	v.Set("cpuperiod", strconv.FormatInt(*flCpuPeriod, 10))
	v.Set("memory", strconv.FormatInt(memory, 10))
	v.Set("memswap", strconv.FormatInt(memorySwap, 10))
	v.Set("cgroupparent", *flCgroupParent)

	v.Set("dockerfile", *dockerfileName)

	ulimitsVar := flUlimits.GetList()
	ulimitsJson, err := json.Marshal(ulimitsVar)
	if err != nil {
		return err
	}
	v.Set("ulimits", string(ulimitsJson))

	headers := http.Header(make(map[string][]string))
	buf, err := json.Marshal(cli.configFile.AuthConfigs)
	if err != nil {
		return err
	}
	headers.Add("X-Registry-Config", base64.URLEncoding.EncodeToString(buf))

	if context != nil {
		headers.Set("Content-Type", "application/tar")
	}
	sopts := &streamOpts{
		rawTerminal: true,
		in:          body,
		out:         cli.out,
		headers:     headers,
	}

	serverResp, err := cli.stream("POST", fmt.Sprintf("/build?%s", v.Encode()), sopts)

	// Windows: show error message about modified file permissions.
	if runtime.GOOS == "windows" {
		h, err := httputils.ParseServerHeader(serverResp.header.Get("Server"))
		if err == nil {
			if h.OS != "windows" {
				fmt.Fprintln(cli.err, `SECURITY WARNING: You are building a Docker image from Windows against a non-Windows Docker host. All files and directories added to build context will have '-rwxr-xr-x' permissions. It is recommended to double check and reset permissions for sensitive files and directories.`)
			}
		}
	}

	if jerr, ok := err.(*jsonmessage.JSONError); ok {
		// If no error code is set, default to 1
		if jerr.Code == 0 {
			jerr.Code = 1
		}
		return Cli.StatusError{Status: jerr.Message, StatusCode: jerr.Code}
	}
	return err
}
Esempio n. 9
0
func Parse(cmd *flag.FlagSet, args []string) (*Config, *HostConfig, *flag.FlagSet, error) {
	var (
		// FIXME: use utils.ListOpts for attach and volumes?
		flAttach  = opts.NewListOpts(opts.ValidateAttach)
		flVolumes = opts.NewListOpts(opts.ValidatePath)
		flLinks   = opts.NewListOpts(opts.ValidateLink)
		flEnv     = opts.NewListOpts(opts.ValidateEnv)
		flDevices = opts.NewListOpts(opts.ValidatePath)

		ulimits   = make(map[string]*ulimit.Ulimit)
		flUlimits = opts.NewUlimitOpt(ulimits)

		flPublish     = opts.NewListOpts(nil)
		flExpose      = opts.NewListOpts(nil)
		flDns         = opts.NewListOpts(opts.ValidateIPAddress)
		flDnsSearch   = opts.NewListOpts(opts.ValidateDnsSearch)
		flExtraHosts  = opts.NewListOpts(opts.ValidateExtraHost)
		flVolumesFrom = opts.NewListOpts(nil)
		flLxcOpts     = opts.NewListOpts(nil)
		flEnvFile     = opts.NewListOpts(nil)
		flCapAdd      = opts.NewListOpts(nil)
		flCapDrop     = opts.NewListOpts(nil)
		flSecurityOpt = opts.NewListOpts(nil)

		flNetwork         = cmd.Bool([]string{"#n", "#-networking"}, true, "Enable networking for this container")
		flPrivileged      = cmd.Bool([]string{"#privileged", "-privileged"}, false, "Give extended privileges to this container")
		flPidMode         = cmd.String([]string{"-pid"}, "", "PID namespace to use")
		flPublishAll      = cmd.Bool([]string{"P", "-publish-all"}, false, "Publish all exposed ports to random ports")
		flStdin           = cmd.Bool([]string{"i", "-interactive"}, false, "Keep STDIN open even if not attached")
		flTty             = cmd.Bool([]string{"t", "-tty"}, false, "Allocate a pseudo-TTY")
		flContainerIDFile = cmd.String([]string{"#cidfile", "-cidfile"}, "", "Write the container ID to the file")
		flEntrypoint      = cmd.String([]string{"#entrypoint", "-entrypoint"}, "", "Overwrite the default ENTRYPOINT of the image")
		flHostname        = cmd.String([]string{"h", "-hostname"}, "", "Container host name")
		flMemoryString    = cmd.String([]string{"m", "-memory"}, "", "Memory limit")
		flMemorySwap      = cmd.String([]string{"-memory-swap"}, "", "Total memory (memory + swap), '-1' to disable swap")
		flUser            = cmd.String([]string{"u", "-user"}, "", "Username or UID (format: <name|uid>[:<group|gid>])")
		flWorkingDir      = cmd.String([]string{"w", "-workdir"}, "", "Working directory inside the container")
		flCpuShares       = cmd.Int64([]string{"c", "-cpu-shares"}, 0, "CPU shares (relative weight)")
		flCpuset          = cmd.String([]string{"-cpuset"}, "", "CPUs in which to allow execution (0-3, 0,1)")
		flNetMode         = cmd.String([]string{"-net"}, "bridge", "Set the Network mode for the container")
		flMacAddress      = cmd.String([]string{"-mac-address"}, "", "Container MAC address (e.g. 92:d0:c6:0a:29:33)")
		flIpcMode         = cmd.String([]string{"-ipc"}, "", "IPC namespace to use")
		flRestartPolicy   = cmd.String([]string{"-restart"}, "", "Restart policy to apply when a container exits")
		flReadonlyRootfs  = cmd.Bool([]string{"-read-only"}, false, "Mount the container's root filesystem as read only")
	)

	cmd.Var(&flAttach, []string{"a", "-attach"}, "Attach to STDIN, STDOUT or STDERR")
	cmd.Var(&flVolumes, []string{"v", "-volume"}, "Bind mount a volume")
	cmd.Var(&flLinks, []string{"#link", "-link"}, "Add link to another container")
	cmd.Var(&flDevices, []string{"-device"}, "Add a host device to the container")
	cmd.Var(&flEnv, []string{"e", "-env"}, "Set environment variables")
	cmd.Var(&flEnvFile, []string{"-env-file"}, "Read in a file of environment variables")
	cmd.Var(&flPublish, []string{"p", "-publish"}, "Publish a container's port(s) to the host")
	cmd.Var(&flExpose, []string{"#expose", "-expose"}, "Expose a port or a range of ports")
	cmd.Var(&flDns, []string{"#dns", "-dns"}, "Set custom DNS servers")
	cmd.Var(&flDnsSearch, []string{"-dns-search"}, "Set custom DNS search domains")
	cmd.Var(&flExtraHosts, []string{"-add-host"}, "Add a custom host-to-IP mapping (host:ip)")
	cmd.Var(&flVolumesFrom, []string{"#volumes-from", "-volumes-from"}, "Mount volumes from the specified container(s)")
	cmd.Var(&flLxcOpts, []string{"#lxc-conf", "-lxc-conf"}, "Add custom lxc options")
	cmd.Var(&flCapAdd, []string{"-cap-add"}, "Add Linux capabilities")
	cmd.Var(&flCapDrop, []string{"-cap-drop"}, "Drop Linux capabilities")
	cmd.Var(&flSecurityOpt, []string{"-security-opt"}, "Security Options")
	cmd.Var(flUlimits, []string{"-ulimit"}, "Ulimit options")

	cmd.Require(flag.Min, 1)

	if err := utils.ParseFlags(cmd, args, true); err != nil {
		return nil, nil, cmd, err
	}

	// Validate input params
	if *flWorkingDir != "" && !path.IsAbs(*flWorkingDir) {
		return nil, nil, cmd, ErrInvalidWorkingDirectory
	}

	// Validate the input mac address
	if *flMacAddress != "" {
		if _, err := opts.ValidateMACAddress(*flMacAddress); err != nil {
			return nil, nil, cmd, fmt.Errorf("%s is not a valid mac address", *flMacAddress)
		}
	}
	var (
		attachStdin  = flAttach.Get("stdin")
		attachStdout = flAttach.Get("stdout")
		attachStderr = flAttach.Get("stderr")
	)

	if *flNetMode != "bridge" && *flNetMode != "none" && *flHostname != "" {
		return nil, nil, cmd, ErrConflictNetworkHostname
	}

	if *flNetMode == "host" && flLinks.Len() > 0 {
		return nil, nil, cmd, ErrConflictHostNetworkAndLinks
	}

	if *flNetMode == "container" && flLinks.Len() > 0 {
		return nil, nil, cmd, ErrConflictContainerNetworkAndLinks
	}

	if *flNetMode == "host" && flDns.Len() > 0 {
		return nil, nil, cmd, ErrConflictHostNetworkAndDns
	}

	if *flNetMode == "container" && flDns.Len() > 0 {
		return nil, nil, cmd, ErrConflictContainerNetworkAndDns
	}

	// If neither -d or -a are set, attach to everything by default
	if flAttach.Len() == 0 {
		attachStdout = true
		attachStderr = true
		if *flStdin {
			attachStdin = true
		}
	}

	var flMemory int64
	if *flMemoryString != "" {
		parsedMemory, err := units.RAMInBytes(*flMemoryString)
		if err != nil {
			return nil, nil, cmd, err
		}
		flMemory = parsedMemory
	}

	var MemorySwap int64
	if *flMemorySwap != "" {
		if *flMemorySwap == "-1" {
			MemorySwap = -1
		} else {
			parsedMemorySwap, err := units.RAMInBytes(*flMemorySwap)
			if err != nil {
				return nil, nil, cmd, err
			}
			MemorySwap = parsedMemorySwap
		}
	}

	var binds []string
	// add any bind targets to the list of container volumes
	for bind := range flVolumes.GetMap() {
		if arr := strings.Split(bind, ":"); len(arr) > 1 {
			if arr[1] == "/" {
				return nil, nil, cmd, fmt.Errorf("Invalid bind mount: destination can't be '/'")
			}
			// after creating the bind mount we want to delete it from the flVolumes values because
			// we do not want bind mounts being committed to image configs
			binds = append(binds, bind)
			flVolumes.Delete(bind)
		} else if bind == "/" {
			return nil, nil, cmd, fmt.Errorf("Invalid volume: path can't be '/'")
		}
	}

	var (
		parsedArgs = cmd.Args()
		runCmd     []string
		entrypoint []string
		image      = cmd.Arg(0)
	)
	if len(parsedArgs) > 1 {
		runCmd = parsedArgs[1:]
	}
	if *flEntrypoint != "" {
		entrypoint = []string{*flEntrypoint}
	}

	lxcConf, err := parseKeyValueOpts(flLxcOpts)
	if err != nil {
		return nil, nil, cmd, err
	}

	var (
		domainname string
		hostname   = *flHostname
		parts      = strings.SplitN(hostname, ".", 2)
	)
	if len(parts) > 1 {
		hostname = parts[0]
		domainname = parts[1]
	}

	ports, portBindings, err := nat.ParsePortSpecs(flPublish.GetAll())
	if err != nil {
		return nil, nil, cmd, err
	}

	// Merge in exposed ports to the map of published ports
	for _, e := range flExpose.GetAll() {
		if strings.Contains(e, ":") {
			return nil, nil, cmd, fmt.Errorf("Invalid port format for --expose: %s", e)
		}
		//support two formats for expose, original format <portnum>/[<proto>] or <startport-endport>/[<proto>]
		proto, port := nat.SplitProtoPort(e)
		//parse the start and end port and create a sequence of ports to expose
		//if expose a port, the start and end port are the same
		start, end, err := parsers.ParsePortRange(port)
		if err != nil {
			return nil, nil, cmd, fmt.Errorf("Invalid range format for --expose: %s, error: %s", e, err)
		}
		for i := start; i <= end; i++ {
			p := nat.NewPort(proto, strconv.FormatUint(i, 10))
			if _, exists := ports[p]; !exists {
				ports[p] = struct{}{}
			}
		}
	}

	// parse device mappings
	deviceMappings := []DeviceMapping{}
	for _, device := range flDevices.GetAll() {
		deviceMapping, err := ParseDevice(device)
		if err != nil {
			return nil, nil, cmd, err
		}
		deviceMappings = append(deviceMappings, deviceMapping)
	}

	// collect all the environment variables for the container
	envVariables := []string{}
	for _, ef := range flEnvFile.GetAll() {
		parsedVars, err := opts.ParseEnvFile(ef)
		if err != nil {
			return nil, nil, cmd, err
		}
		envVariables = append(envVariables, parsedVars...)
	}
	// parse the '-e' and '--env' after, to allow override
	envVariables = append(envVariables, flEnv.GetAll()...)

	ipcMode := IpcMode(*flIpcMode)
	if !ipcMode.Valid() {
		return nil, nil, cmd, fmt.Errorf("--ipc: invalid IPC mode")
	}

	pidMode := PidMode(*flPidMode)
	if !pidMode.Valid() {
		return nil, nil, cmd, fmt.Errorf("--pid: invalid PID mode")
	}

	netMode, err := parseNetMode(*flNetMode)
	if err != nil {
		return nil, nil, cmd, fmt.Errorf("--net: invalid net mode: %v", err)
	}

	restartPolicy, err := parseRestartPolicy(*flRestartPolicy)
	if err != nil {
		return nil, nil, cmd, err
	}

	config := &Config{
		Hostname:        hostname,
		Domainname:      domainname,
		PortSpecs:       nil, // Deprecated
		ExposedPorts:    ports,
		User:            *flUser,
		Tty:             *flTty,
		NetworkDisabled: !*flNetwork,
		OpenStdin:       *flStdin,
		Memory:          flMemory,
		MemorySwap:      MemorySwap,
		CpuShares:       *flCpuShares,
		Cpuset:          *flCpuset,
		AttachStdin:     attachStdin,
		AttachStdout:    attachStdout,
		AttachStderr:    attachStderr,
		Env:             envVariables,
		Cmd:             runCmd,
		Image:           image,
		Volumes:         flVolumes.GetMap(),
		MacAddress:      *flMacAddress,
		Entrypoint:      entrypoint,
		WorkingDir:      *flWorkingDir,
	}

	hostConfig := &HostConfig{
		Binds:           binds,
		ContainerIDFile: *flContainerIDFile,
		LxcConf:         lxcConf,
		Privileged:      *flPrivileged,
		PortBindings:    portBindings,
		Links:           flLinks.GetAll(),
		PublishAllPorts: *flPublishAll,
		Dns:             flDns.GetAll(),
		DnsSearch:       flDnsSearch.GetAll(),
		ExtraHosts:      flExtraHosts.GetAll(),
		VolumesFrom:     flVolumesFrom.GetAll(),
		NetworkMode:     netMode,
		IpcMode:         ipcMode,
		PidMode:         pidMode,
		Devices:         deviceMappings,
		CapAdd:          flCapAdd.GetAll(),
		CapDrop:         flCapDrop.GetAll(),
		RestartPolicy:   restartPolicy,
		SecurityOpt:     flSecurityOpt.GetAll(),
		ReadonlyRootfs:  *flReadonlyRootfs,
		Ulimits:         flUlimits.GetList(),
	}

	// When allocating stdin in attached mode, close stdin at client disconnect
	if config.OpenStdin && config.AttachStdin {
		config.StdinOnce = true
	}
	return config, hostConfig, cmd, nil
}
Esempio n. 10
0
// addFlags adds all command line flags that will be used by parse to the FlagSet
func addFlags(flags *pflag.FlagSet) *containerOptions {
	copts := &containerOptions{
		aliases:           opts.NewListOpts(nil),
		attach:            opts.NewListOpts(validateAttach),
		blkioWeightDevice: opts.NewWeightdeviceOpt(opts.ValidateWeightDevice),
		capAdd:            opts.NewListOpts(nil),
		capDrop:           opts.NewListOpts(nil),
		dns:               opts.NewListOpts(opts.ValidateIPAddress),
		dnsOptions:        opts.NewListOpts(nil),
		dnsSearch:         opts.NewListOpts(opts.ValidateDNSSearch),
		deviceReadBps:     opts.NewThrottledeviceOpt(opts.ValidateThrottleBpsDevice),
		deviceReadIOps:    opts.NewThrottledeviceOpt(opts.ValidateThrottleIOpsDevice),
		deviceWriteBps:    opts.NewThrottledeviceOpt(opts.ValidateThrottleBpsDevice),
		deviceWriteIOps:   opts.NewThrottledeviceOpt(opts.ValidateThrottleIOpsDevice),
		devices:           opts.NewListOpts(validateDevice),
		env:               opts.NewListOpts(opts.ValidateEnv),
		envFile:           opts.NewListOpts(nil),
		expose:            opts.NewListOpts(nil),
		extraHosts:        opts.NewListOpts(opts.ValidateExtraHost),
		groupAdd:          opts.NewListOpts(nil),
		labels:            opts.NewListOpts(opts.ValidateEnv),
		labelsFile:        opts.NewListOpts(nil),
		linkLocalIPs:      opts.NewListOpts(nil),
		links:             opts.NewListOpts(opts.ValidateLink),
		loggingOpts:       opts.NewListOpts(nil),
		publish:           opts.NewListOpts(nil),
		securityOpt:       opts.NewListOpts(nil),
		storageOpt:        opts.NewListOpts(nil),
		sysctls:           opts.NewMapOpts(nil, opts.ValidateSysctl),
		tmpfs:             opts.NewListOpts(nil),
		ulimits:           opts.NewUlimitOpt(nil),
		volumes:           opts.NewListOpts(nil),
		volumesFrom:       opts.NewListOpts(nil),
	}

	// General purpose flags
	flags.VarP(&copts.attach, "attach", "a", "Attach to STDIN, STDOUT or STDERR")
	flags.Var(&copts.devices, "device", "Add a host device to the container")
	flags.VarP(&copts.env, "env", "e", "Set environment variables")
	flags.Var(&copts.envFile, "env-file", "Read in a file of environment variables")
	flags.StringVar(&copts.entrypoint, "entrypoint", "", "Overwrite the default ENTRYPOINT of the image")
	flags.Var(&copts.groupAdd, "group-add", "Add additional groups to join")
	flags.StringVarP(&copts.hostname, "hostname", "h", "", "Container host name")
	flags.BoolVarP(&copts.stdin, "interactive", "i", false, "Keep STDIN open even if not attached")
	flags.VarP(&copts.labels, "label", "l", "Set meta data on a container")
	flags.Var(&copts.labelsFile, "label-file", "Read in a line delimited file of labels")
	flags.BoolVar(&copts.readonlyRootfs, "read-only", false, "Mount the container's root filesystem as read only")
	flags.StringVar(&copts.restartPolicy, "restart", "no", "Restart policy to apply when a container exits")
	flags.StringVar(&copts.stopSignal, "stop-signal", signal.DefaultStopSignal, fmt.Sprintf("Signal to stop a container, %v by default", signal.DefaultStopSignal))
	flags.IntVar(&copts.stopTimeout, "stop-timeout", 0, "Timeout (in seconds) to stop a container")
	flags.SetAnnotation("stop-timeout", "version", []string{"1.25"})
	flags.Var(copts.sysctls, "sysctl", "Sysctl options")
	flags.BoolVarP(&copts.tty, "tty", "t", false, "Allocate a pseudo-TTY")
	flags.Var(copts.ulimits, "ulimit", "Ulimit options")
	flags.StringVarP(&copts.user, "user", "u", "", "Username or UID (format: <name|uid>[:<group|gid>])")
	flags.StringVarP(&copts.workingDir, "workdir", "w", "", "Working directory inside the container")
	flags.BoolVar(&copts.autoRemove, "rm", false, "Automatically remove the container when it exits")

	// Security
	flags.Var(&copts.capAdd, "cap-add", "Add Linux capabilities")
	flags.Var(&copts.capDrop, "cap-drop", "Drop Linux capabilities")
	flags.BoolVar(&copts.privileged, "privileged", false, "Give extended privileges to this container")
	flags.Var(&copts.securityOpt, "security-opt", "Security Options")
	flags.StringVar(&copts.usernsMode, "userns", "", "User namespace to use")
	flags.StringVar(&copts.credentialSpec, "credentialspec", "", "Credential spec for managed service account (Windows only)")

	// Network and port publishing flag
	flags.Var(&copts.extraHosts, "add-host", "Add a custom host-to-IP mapping (host:ip)")
	flags.Var(&copts.dns, "dns", "Set custom DNS servers")
	// We allow for both "--dns-opt" and "--dns-option", although the latter is the recommended way.
	// This is to be consistent with service create/update
	flags.Var(&copts.dnsOptions, "dns-opt", "Set DNS options")
	flags.Var(&copts.dnsOptions, "dns-option", "Set DNS options")
	flags.MarkHidden("dns-opt")
	flags.Var(&copts.dnsSearch, "dns-search", "Set custom DNS search domains")
	flags.Var(&copts.expose, "expose", "Expose a port or a range of ports")
	flags.StringVar(&copts.ipv4Address, "ip", "", "IPv4 address (e.g., 172.30.100.104)")
	flags.StringVar(&copts.ipv6Address, "ip6", "", "IPv6 address (e.g., 2001:db8::33)")
	flags.Var(&copts.links, "link", "Add link to another container")
	flags.Var(&copts.linkLocalIPs, "link-local-ip", "Container IPv4/IPv6 link-local addresses")
	flags.StringVar(&copts.macAddress, "mac-address", "", "Container MAC address (e.g., 92:d0:c6:0a:29:33)")
	flags.VarP(&copts.publish, "publish", "p", "Publish a container's port(s) to the host")
	flags.BoolVarP(&copts.publishAll, "publish-all", "P", false, "Publish all exposed ports to random ports")
	// We allow for both "--net" and "--network", although the latter is the recommended way.
	flags.StringVar(&copts.netMode, "net", "default", "Connect a container to a network")
	flags.StringVar(&copts.netMode, "network", "default", "Connect a container to a network")
	flags.MarkHidden("net")
	// We allow for both "--net-alias" and "--network-alias", although the latter is the recommended way.
	flags.Var(&copts.aliases, "net-alias", "Add network-scoped alias for the container")
	flags.Var(&copts.aliases, "network-alias", "Add network-scoped alias for the container")
	flags.MarkHidden("net-alias")

	// Logging and storage
	flags.StringVar(&copts.loggingDriver, "log-driver", "", "Logging driver for the container")
	flags.StringVar(&copts.volumeDriver, "volume-driver", "", "Optional volume driver for the container")
	flags.Var(&copts.loggingOpts, "log-opt", "Log driver options")
	flags.Var(&copts.storageOpt, "storage-opt", "Storage driver options for the container")
	flags.Var(&copts.tmpfs, "tmpfs", "Mount a tmpfs directory")
	flags.Var(&copts.volumesFrom, "volumes-from", "Mount volumes from the specified container(s)")
	flags.VarP(&copts.volumes, "volume", "v", "Bind mount a volume")

	// Health-checking
	flags.StringVar(&copts.healthCmd, "health-cmd", "", "Command to run to check health")
	flags.DurationVar(&copts.healthInterval, "health-interval", 0, "Time between running the check (ns|us|ms|s|m|h) (default 0s)")
	flags.IntVar(&copts.healthRetries, "health-retries", 0, "Consecutive failures needed to report unhealthy")
	flags.DurationVar(&copts.healthTimeout, "health-timeout", 0, "Maximum time to allow one check to run (ns|us|ms|s|m|h) (default 0s)")
	flags.BoolVar(&copts.noHealthcheck, "no-healthcheck", false, "Disable any container-specified HEALTHCHECK")

	// Resource management
	flags.Uint16Var(&copts.blkioWeight, "blkio-weight", 0, "Block IO (relative weight), between 10 and 1000, or 0 to disable (default 0)")
	flags.Var(&copts.blkioWeightDevice, "blkio-weight-device", "Block IO weight (relative device weight)")
	flags.StringVar(&copts.containerIDFile, "cidfile", "", "Write the container ID to the file")
	flags.StringVar(&copts.cpusetCpus, "cpuset-cpus", "", "CPUs in which to allow execution (0-3, 0,1)")
	flags.StringVar(&copts.cpusetMems, "cpuset-mems", "", "MEMs in which to allow execution (0-3, 0,1)")
	flags.Int64Var(&copts.cpuCount, "cpu-count", 0, "CPU count (Windows only)")
	flags.Int64Var(&copts.cpuPercent, "cpu-percent", 0, "CPU percent (Windows only)")
	flags.Int64Var(&copts.cpuPeriod, "cpu-period", 0, "Limit CPU CFS (Completely Fair Scheduler) period")
	flags.Int64Var(&copts.cpuQuota, "cpu-quota", 0, "Limit CPU CFS (Completely Fair Scheduler) quota")
	flags.Int64Var(&copts.cpuRealtimePeriod, "cpu-rt-period", 0, "Limit CPU real-time period in microseconds")
	flags.Int64Var(&copts.cpuRealtimeRuntime, "cpu-rt-runtime", 0, "Limit CPU real-time runtime in microseconds")
	flags.Int64VarP(&copts.cpuShares, "cpu-shares", "c", 0, "CPU shares (relative weight)")
	flags.Var(&copts.cpus, "cpus", "Number of CPUs")
	flags.Var(&copts.deviceReadBps, "device-read-bps", "Limit read rate (bytes per second) from a device")
	flags.Var(&copts.deviceReadIOps, "device-read-iops", "Limit read rate (IO per second) from a device")
	flags.Var(&copts.deviceWriteBps, "device-write-bps", "Limit write rate (bytes per second) to a device")
	flags.Var(&copts.deviceWriteIOps, "device-write-iops", "Limit write rate (IO per second) to a device")
	flags.StringVar(&copts.ioMaxBandwidth, "io-maxbandwidth", "", "Maximum IO bandwidth limit for the system drive (Windows only)")
	flags.Uint64Var(&copts.ioMaxIOps, "io-maxiops", 0, "Maximum IOps limit for the system drive (Windows only)")
	flags.StringVar(&copts.kernelMemory, "kernel-memory", "", "Kernel memory limit")
	flags.StringVarP(&copts.memoryString, "memory", "m", "", "Memory limit")
	flags.StringVar(&copts.memoryReservation, "memory-reservation", "", "Memory soft limit")
	flags.StringVar(&copts.memorySwap, "memory-swap", "", "Swap limit equal to memory plus swap: '-1' to enable unlimited swap")
	flags.Int64Var(&copts.swappiness, "memory-swappiness", -1, "Tune container memory swappiness (0 to 100)")
	flags.BoolVar(&copts.oomKillDisable, "oom-kill-disable", false, "Disable OOM Killer")
	flags.IntVar(&copts.oomScoreAdj, "oom-score-adj", 0, "Tune host's OOM preferences (-1000 to 1000)")
	flags.Int64Var(&copts.pidsLimit, "pids-limit", 0, "Tune container pids limit (set -1 for unlimited)")

	// Low-level execution (cgroups, namespaces, ...)
	flags.StringVar(&copts.cgroupParent, "cgroup-parent", "", "Optional parent cgroup for the container")
	flags.StringVar(&copts.ipcMode, "ipc", "", "IPC namespace to use")
	flags.StringVar(&copts.isolation, "isolation", "", "Container isolation technology")
	flags.StringVar(&copts.pidMode, "pid", "", "PID namespace to use")
	flags.StringVar(&copts.shmSize, "shm-size", "", "Size of /dev/shm, default value is 64MB")
	flags.StringVar(&copts.utsMode, "uts", "", "UTS namespace to use")
	flags.StringVar(&copts.runtime, "runtime", "", "Runtime to use for this container")

	flags.BoolVar(&copts.init, "init", false, "Run an init inside the container that forwards signals and reaps processes")
	flags.StringVar(&copts.initPath, "init-path", "", "Path to the docker-init binary")
	return copts
}
Esempio n. 11
0
// Parse parses the specified args for the specified command and generates a Config,
// a HostConfig and returns them with the specified command.
// If the specified args are not valid, it will return an error.
func Parse(cmd *flag.FlagSet, args []string) (*Config, *HostConfig, *flag.FlagSet, error) {
	var (
		// FIXME: use utils.ListOpts for attach and volumes?
		flAttach  = opts.NewListOpts(opts.ValidateAttach)
		flVolumes = opts.NewListOpts(opts.ValidatePath)
		flLinks   = opts.NewListOpts(opts.ValidateLink)
		flEnv     = opts.NewListOpts(opts.ValidateEnv)
		flLabels  = opts.NewListOpts(opts.ValidateEnv)
		flDevices = opts.NewListOpts(opts.ValidateDevice)

		flUlimits = opts.NewUlimitOpt(nil)

		flPublish     = opts.NewListOpts(nil)
		flExpose      = opts.NewListOpts(nil)
		flDNS         = opts.NewListOpts(opts.ValidateIPAddress)
		flDNSSearch   = opts.NewListOpts(opts.ValidateDNSSearch)
		flExtraHosts  = opts.NewListOpts(opts.ValidateExtraHost)
		flVolumesFrom = opts.NewListOpts(nil)
		flLxcOpts     = opts.NewListOpts(nil)
		flEnvFile     = opts.NewListOpts(nil)
		flCapAdd      = opts.NewListOpts(nil)
		flCapDrop     = opts.NewListOpts(nil)
		flGroupAdd    = opts.NewListOpts(nil)
		flSecurityOpt = opts.NewListOpts(nil)
		flLabelsFile  = opts.NewListOpts(nil)
		flLoggingOpts = opts.NewListOpts(nil)

		flNetwork         = cmd.Bool([]string{"#n", "#-networking"}, true, "Enable networking for this container")
		flPrivileged      = cmd.Bool([]string{"#privileged", "-privileged"}, false, "Give extended privileges to this container")
		flPidMode         = cmd.String([]string{"-pid"}, "", "PID namespace to use")
		flUTSMode         = cmd.String([]string{"-uts"}, "", "UTS namespace to use")
		flPublishAll      = cmd.Bool([]string{"P", "-publish-all"}, false, "Publish all exposed ports to random ports")
		flStdin           = cmd.Bool([]string{"i", "-interactive"}, false, "Keep STDIN open even if not attached")
		flTty             = cmd.Bool([]string{"t", "-tty"}, false, "Allocate a pseudo-TTY")
		flOomKillDisable  = cmd.Bool([]string{"-oom-kill-disable"}, false, "Disable OOM Killer")
		flContainerIDFile = cmd.String([]string{"#cidfile", "-cidfile"}, "", "Write the container ID to the file")
		flEntrypoint      = cmd.String([]string{"#entrypoint", "-entrypoint"}, "", "Overwrite the default ENTRYPOINT of the image")
		flHostname        = cmd.String([]string{"h", "-hostname"}, "", "Container host name")
		flMemoryString    = cmd.String([]string{"m", "-memory"}, "", "Memory limit")
		flMemorySwap      = cmd.String([]string{"-memory-swap"}, "", "Total memory (memory + swap), '-1' to disable swap")
		flKernelMemory    = cmd.String([]string{"-kernel-memory"}, "", "Kernel memory limit")
		flUser            = cmd.String([]string{"u", "-user"}, "", "Username or UID (format: <name|uid>[:<group|gid>])")
		flWorkingDir      = cmd.String([]string{"w", "-workdir"}, "", "Working directory inside the container")
		flCPUShares       = cmd.Int64([]string{"c", "-cpu-shares"}, 0, "CPU shares (relative weight)")
		flCPUPeriod       = cmd.Int64([]string{"-cpu-period"}, 0, "Limit CPU CFS (Completely Fair Scheduler) period")
		flCPUQuota        = cmd.Int64([]string{"-cpu-quota"}, 0, "Limit CPU CFS (Completely Fair Scheduler) quota")
		flCpusetCpus      = cmd.String([]string{"#-cpuset", "-cpuset-cpus"}, "", "CPUs in which to allow execution (0-3, 0,1)")
		flCpusetMems      = cmd.String([]string{"-cpuset-mems"}, "", "MEMs in which to allow execution (0-3, 0,1)")
		flBlkioWeight     = cmd.Int64([]string{"-blkio-weight"}, 0, "Block IO (relative weight), between 10 and 1000")
		flSwappiness      = cmd.Int64([]string{"-memory-swappiness"}, -1, "Tuning container memory swappiness (0 to 100)")
		flNetMode         = cmd.String([]string{"-net"}, "default", "Set the Network mode for the container")
		flMacAddress      = cmd.String([]string{"-mac-address"}, "", "Container MAC address (e.g. 92:d0:c6:0a:29:33)")
		flIpcMode         = cmd.String([]string{"-ipc"}, "", "IPC namespace to use")
		flRestartPolicy   = cmd.String([]string{"-restart"}, "no", "Restart policy to apply when a container exits")
		flReadonlyRootfs  = cmd.Bool([]string{"-read-only"}, false, "Mount the container's root filesystem as read only")
		flLoggingDriver   = cmd.String([]string{"-log-driver"}, "", "Logging driver for container")
		flCgroupParent    = cmd.String([]string{"-cgroup-parent"}, "", "Optional parent cgroup for the container")
		flVolumeDriver    = cmd.String([]string{"-volume-driver"}, "", "Optional volume driver for the container")
	)

	cmd.Var(&flAttach, []string{"a", "-attach"}, "Attach to STDIN, STDOUT or STDERR")
	cmd.Var(&flVolumes, []string{"v", "-volume"}, "Bind mount a volume")
	cmd.Var(&flLinks, []string{"#link", "-link"}, "Add link to another container")
	cmd.Var(&flDevices, []string{"-device"}, "Add a host device to the container")
	cmd.Var(&flLabels, []string{"l", "-label"}, "Set meta data on a container")
	cmd.Var(&flLabelsFile, []string{"-label-file"}, "Read in a line delimited file of labels")
	cmd.Var(&flEnv, []string{"e", "-env"}, "Set environment variables")
	cmd.Var(&flEnvFile, []string{"-env-file"}, "Read in a file of environment variables")
	cmd.Var(&flPublish, []string{"p", "-publish"}, "Publish a container's port(s) to the host")
	cmd.Var(&flExpose, []string{"#expose", "-expose"}, "Expose a port or a range of ports")
	cmd.Var(&flDNS, []string{"#dns", "-dns"}, "Set custom DNS servers")
	cmd.Var(&flDNSSearch, []string{"-dns-search"}, "Set custom DNS search domains")
	cmd.Var(&flExtraHosts, []string{"-add-host"}, "Add a custom host-to-IP mapping (host:ip)")
	cmd.Var(&flVolumesFrom, []string{"#volumes-from", "-volumes-from"}, "Mount volumes from the specified container(s)")
	cmd.Var(&flLxcOpts, []string{"#lxc-conf", "-lxc-conf"}, "Add custom lxc options")
	cmd.Var(&flCapAdd, []string{"-cap-add"}, "Add Linux capabilities")
	cmd.Var(&flCapDrop, []string{"-cap-drop"}, "Drop Linux capabilities")
	cmd.Var(&flGroupAdd, []string{"-group-add"}, "Add additional groups to join")
	cmd.Var(&flSecurityOpt, []string{"-security-opt"}, "Security Options")
	cmd.Var(flUlimits, []string{"-ulimit"}, "Ulimit options")
	cmd.Var(&flLoggingOpts, []string{"-log-opt"}, "Log driver options")

	expFlags := attachExperimentalFlags(cmd)

	cmd.Require(flag.Min, 1)

	i