// InstallFlags adds command-line options to the top-level flag parser for
// the current process.
func (options *Options) InstallFlags(cmd *flag.FlagSet, usageFn func(string) string) {
options.Mirrors = opts.NewListOpts(ValidateMirror)
cmd.Var(&options.Mirrors, []string{"-registry-mirror"}, usageFn("Preferred Docker registry mirror"))
options.InsecureRegistries = opts.NewListOpts(ValidateIndexName)
cmd.Var(&options.InsecureRegistries, []string{"-insecure-registry"}, usageFn("Enable insecure registry communication"))
cmd.BoolVar(&V2Only, []string{"-disable-legacy-registry"}, false, "Do not contact legacy registries")
}
// InstallFlags adds command-line options to the top-level flag parser for
// the current process.
// Subsequent calls to `flag.Parse` will populate config with values parsed
// from the command-line.
func (config *Config) InstallFlags(cmd *flag.FlagSet, usageFn func(string) string) {
// First handle install flags which are consistent cross-platform
config.InstallCommonFlags(cmd, usageFn)
// Then platform-specific install flags
cmd.BoolVar(&config.EnableSelinuxSupport, []string{"-selinux-enabled"}, false, usageFn("Enable selinux support"))
cmd.StringVar(&config.SocketGroup, []string{"G", "-group"}, "docker", usageFn("Group for the unix socket"))
config.Ulimits = make(map[string]*units.Ulimit)
cmd.Var(runconfigopts.NewUlimitOpt(&config.Ulimits), []string{"-default-ulimit"}, usageFn("Set default ulimits for containers"))
cmd.BoolVar(&config.bridgeConfig.EnableIPTables, []string{"#iptables", "-iptables"}, true, usageFn("Enable addition of iptables rules"))
cmd.BoolVar(&config.bridgeConfig.EnableIPForward, []string{"#ip-forward", "-ip-forward"}, true, usageFn("Enable net.ipv4.ip_forward"))
cmd.BoolVar(&config.bridgeConfig.EnableIPMasq, []string{"-ip-masq"}, true, usageFn("Enable IP masquerading"))
cmd.BoolVar(&config.bridgeConfig.EnableIPv6, []string{"-ipv6"}, false, usageFn("Enable IPv6 networking"))
cmd.StringVar(&config.ExecRoot, []string{"-exec-root"}, defaultExecRoot, usageFn("Root directory for execution state files"))
cmd.StringVar(&config.bridgeConfig.IP, []string{"#bip", "-bip"}, "", usageFn("Specify network bridge IP"))
cmd.StringVar(&config.bridgeConfig.Iface, []string{"b", "-bridge"}, "", usageFn("Attach containers to a network bridge"))
cmd.StringVar(&config.bridgeConfig.FixedCIDR, []string{"-fixed-cidr"}, "", usageFn("IPv4 subnet for fixed IPs"))
cmd.StringVar(&config.bridgeConfig.FixedCIDRv6, []string{"-fixed-cidr-v6"}, "", usageFn("IPv6 subnet for fixed IPs"))
cmd.Var(opts.NewIPOpt(&config.bridgeConfig.DefaultGatewayIPv4, ""), []string{"-default-gateway"}, usageFn("Container default gateway IPv4 address"))
cmd.Var(opts.NewIPOpt(&config.bridgeConfig.DefaultGatewayIPv6, ""), []string{"-default-gateway-v6"}, usageFn("Container default gateway IPv6 address"))
cmd.BoolVar(&config.bridgeConfig.InterContainerCommunication, []string{"#icc", "-icc"}, true, usageFn("Enable inter-container communication"))
cmd.Var(opts.NewIPOpt(&config.bridgeConfig.DefaultIP, "0.0.0.0"), []string{"#ip", "-ip"}, usageFn("Default IP when binding container ports"))
cmd.BoolVar(&config.bridgeConfig.EnableUserlandProxy, []string{"-userland-proxy"}, true, usageFn("Use userland proxy for loopback traffic"))
cmd.BoolVar(&config.EnableCors, []string{"#api-enable-cors", "#-api-enable-cors"}, false, usageFn("Enable CORS headers in the remote API, this is deprecated by --api-cors-header"))
cmd.StringVar(&config.CgroupParent, []string{"-cgroup-parent"}, "", usageFn("Set parent cgroup for all containers"))
cmd.StringVar(&config.RemappedRoot, []string{"-userns-remap"}, "", usageFn("User/Group setting for user namespaces"))
cmd.StringVar(&config.ContainerdAddr, []string{"-containerd"}, "", usageFn("Path to containerd socket"))
cmd.BoolVar(&config.LiveRestore, []string{"-live-restore"}, false, usageFn("Enable live restore of docker when containers are still running"))
config.Runtimes = make(map[string]types.Runtime)
cmd.Var(runconfigopts.NewNamedRuntimeOpt("runtimes", &config.Runtimes, stockRuntimeName), []string{"-add-runtime"}, usageFn("Register an additional OCI compatible runtime"))
cmd.StringVar(&config.DefaultRuntime, []string{"-default-runtime"}, stockRuntimeName, usageFn("Default OCI runtime to be used"))
cmd.IntVar(&config.OOMScoreAdjust, []string{"-oom-score-adjust"}, -500, usageFn("Set the oom_score_adj for the daemon"))
config.attachExperimentalFlags(cmd, usageFn)
}
// InstallCliFlags adds command-line options to the top-level flag parser for
// the current process.
func (options *ServiceOptions) InstallCliFlags(cmd *flag.FlagSet, usageFn func(string) string) {
mirrors := opts.NewNamedListOptsRef("registry-mirrors", &options.Mirrors, ValidateMirror)
cmd.Var(mirrors, []string{"-registry-mirror"}, usageFn("Preferred Docker registry mirror"))
insecureRegistries := opts.NewNamedListOptsRef("insecure-registries", &options.InsecureRegistries, ValidateIndexName)
cmd.Var(insecureRegistries, []string{"-insecure-registry"}, usageFn("Enable insecure registry communication"))
cmd.BoolVar(&options.V2Only, []string{"-disable-legacy-registry"}, false, usageFn("Disable contacting legacy registries"))
}
// InstallCliFlags adds command-line options to the top-level flag parser for
// the current process.
func (options *ServiceOptions) InstallCliFlags(cmd *flag.FlagSet, usageFn func(string) string) {
mirrors := opts.NewNamedListOptsRef("registry-mirrors", &options.Mirrors, ValidateMirror)
cmd.Var(mirrors, []string{"-registry-mirror"}, usageFn("Preferred Docker registry mirror"))
insecureRegistries := opts.NewNamedListOptsRef("insecure-registries", &options.InsecureRegistries, ValidateIndexName)
cmd.Var(insecureRegistries, []string{"-insecure-registry"}, usageFn("Enable insecure registry communication"))
options.installCliPlatformFlags(cmd, usageFn)
}
// InstallFlags adds command-line options to the top-level flag parser for
// the current process.
// Subsequent calls to `flag.Parse` will populate config with values parsed
// from the command-line.
func (config *Config) InstallFlags(cmd *flag.FlagSet, usageFn func(string) string) {
// First handle install flags which are consistent cross-platform
config.InstallCommonFlags(cmd, usageFn)
// Then platform-specific install flags
cmd.BoolVar(&config.EnableSelinuxSupport, []string{"-selinux-enabled"}, false, usageFn("Enable selinux support"))
cmd.StringVar(&config.SocketGroup, []string{"G", "-group"}, "docker", usageFn("Group for the unix socket"))
config.Ulimits = make(map[string]*ulimit.Ulimit)
cmd.Var(opts.NewUlimitOpt(&config.Ulimits), []string{"-default-ulimit"}, usageFn("Set default ulimits for containers"))
cmd.BoolVar(&config.Bridge.EnableIPTables, []string{"#iptables", "-iptables"}, true, usageFn("Enable addition of iptables rules"))
cmd.BoolVar(&config.Bridge.EnableIPForward, []string{"#ip-forward", "-ip-forward"}, true, usageFn("Enable net.ipv4.ip_forward"))
cmd.BoolVar(&config.Bridge.EnableIPMasq, []string{"-ip-masq"}, true, usageFn("Enable IP masquerading"))
cmd.BoolVar(&config.Bridge.EnableIPv6, []string{"-ipv6"}, false, usageFn("Enable IPv6 networking"))
cmd.StringVar(&config.Bridge.IP, []string{"#bip", "-bip"}, "", usageFn("Specify network bridge IP"))
cmd.StringVar(&config.Bridge.Iface, []string{"b", "-bridge"}, "", usageFn("Attach containers to a network bridge"))
cmd.StringVar(&config.Bridge.FixedCIDR, []string{"-fixed-cidr"}, "", usageFn("IPv4 subnet for fixed IPs"))
cmd.StringVar(&config.Bridge.FixedCIDRv6, []string{"-fixed-cidr-v6"}, "", usageFn("IPv6 subnet for fixed IPs"))
cmd.Var(opts.NewIPOpt(&config.Bridge.DefaultGatewayIPv4, ""), []string{"-default-gateway"}, usageFn("Container default gateway IPv4 address"))
cmd.Var(opts.NewIPOpt(&config.Bridge.DefaultGatewayIPv6, ""), []string{"-default-gateway-v6"}, usageFn("Container default gateway IPv6 address"))
cmd.BoolVar(&config.Bridge.InterContainerCommunication, []string{"#icc", "-icc"}, true, usageFn("Enable inter-container communication"))
cmd.Var(opts.NewIPOpt(&config.Bridge.DefaultIP, "0.0.0.0"), []string{"#ip", "-ip"}, usageFn("Default IP when binding container ports"))
cmd.BoolVar(&config.Bridge.EnableUserlandProxy, []string{"-userland-proxy"}, true, usageFn("Use userland proxy for loopback traffic"))
cmd.BoolVar(&config.EnableCors, []string{"#api-enable-cors", "#-api-enable-cors"}, false, usageFn("Enable CORS headers in the remote API, this is deprecated by --api-cors-header"))
cmd.StringVar(&config.CorsHeaders, []string{"-api-cors-header"}, "", usageFn("Set CORS headers in the remote API"))
config.attachExperimentalFlags(cmd, usageFn)
}
// InstallCommonFlags adds command-line options to the top-level flag parser for
// the current process.
// Subsequent calls to `flag.Parse` will populate config with values parsed
// from the command-line.
func (config *Config) InstallCommonFlags(cmd *flag.FlagSet, usageFn func(string) string) {
cmd.Var(opts.NewListOptsRef(&config.GraphOptions, nil), []string{"-storage-opt"}, usageFn("Set storage driver options"))
cmd.Var(opts.NewListOptsRef(&config.ExecOptions, nil), []string{"-exec-opt"}, usageFn("Set exec driver options"))
cmd.StringVar(&config.Pidfile, []string{"p", "-pidfile"}, defaultPidFile, usageFn("Path to use for daemon PID file"))
cmd.StringVar(&config.Root, []string{"g", "-graph"}, defaultGraph, usageFn("Root of the Docker runtime"))
cmd.StringVar(&config.ExecRoot, []string{"-exec-root"}, "/var/run/docker", usageFn("Root of the Docker execdriver"))
cmd.BoolVar(&config.AutoRestart, []string{"#r", "#-restart"}, true, usageFn("--restart on the daemon has been deprecated in favor of --restart policies on docker run"))
cmd.StringVar(&config.GraphDriver, []string{"s", "-storage-driver"}, "", usageFn("Storage driver to use"))
cmd.StringVar(&config.ExecDriver, []string{"e", "-exec-driver"}, defaultExec, usageFn("Exec driver to use"))
cmd.IntVar(&config.Mtu, []string{"#mtu", "-mtu"}, 0, usageFn("Set the containers network MTU"))
// FIXME: why the inconsistency between "hosts" and "sockets"?
cmd.Var(opts.NewListOptsRef(&config.DNS, opts.ValidateIPAddress), []string{"#dns", "-dns"}, usageFn("DNS server to use"))
cmd.Var(opts.NewListOptsRef(&config.DNSOptions, nil), []string{"-dns-opt"}, usageFn("DNS options to use"))
cmd.Var(opts.NewListOptsRef(&config.DNSSearch, opts.ValidateDNSSearch), []string{"-dns-search"}, usageFn("DNS search domains to use"))
cmd.Var(opts.NewListOptsRef(&config.Labels, opts.ValidateLabel), []string{"-label"}, usageFn("Set key=value labels to the daemon"))
cmd.StringVar(&config.LogConfig.Type, []string{"-log-driver"}, "json-file", usageFn("Default driver for container logs"))
cmd.Var(opts.NewMapOpts(config.LogConfig.Config, nil), []string{"-log-opt"}, usageFn("Set log driver options"))
}
// InstallFlags adds command-line options to the top-level flag parser for
// the current process.
func (options *Options) InstallFlags(cmd *flag.FlagSet, usageFn func(string) string) {
options.Mirrors = opts.NewListOpts(ValidateMirror)
cmd.Var(&options.Mirrors, []string{"-registry-mirror"}, usageFn("Preferred Docker registry mirror"))
options.InsecureRegistries = opts.NewListOpts(ValidateIndexName)
cmd.Var(&options.InsecureRegistries, []string{"-insecure-registry"}, usageFn("Enable insecure registry communication"))
}
// Parse parses the specified args for the specified command and generates a Config,
// a HostConfig and returns them with the specified command.
// If the specified args are not valid, it will return an error.
func Parse(cmd *flag.FlagSet, args []string) (*Config, *HostConfig, *flag.FlagSet, error) {
var (
// FIXME: use utils.ListOpts for attach and volumes?
flAttach = opts.NewListOpts(opts.ValidateAttach)
flVolumes = opts.NewListOpts(nil)
flBlkioWeightDevice = opts.NewWeightdeviceOpt(opts.ValidateWeightDevice)
flLinks = opts.NewListOpts(opts.ValidateLink)
flEnv = opts.NewListOpts(opts.ValidateEnv)
flLabels = opts.NewListOpts(opts.ValidateEnv)
flDevices = opts.NewListOpts(opts.ValidateDevice)
flUlimits = opts.NewUlimitOpt(nil)
flPublish = opts.NewListOpts(nil)
flExpose = opts.NewListOpts(nil)
flDNS = opts.NewListOpts(opts.ValidateIPAddress)
flDNSSearch = opts.NewListOpts(opts.ValidateDNSSearch)
flDNSOptions = opts.NewListOpts(nil)
flExtraHosts = opts.NewListOpts(opts.ValidateExtraHost)
flVolumesFrom = opts.NewListOpts(nil)
flEnvFile = opts.NewListOpts(nil)
flCapAdd = opts.NewListOpts(nil)
flCapDrop = opts.NewListOpts(nil)
flGroupAdd = opts.NewListOpts(nil)
flSecurityOpt = opts.NewListOpts(nil)
flLabelsFile = opts.NewListOpts(nil)
flLoggingOpts = opts.NewListOpts(nil)
flPrivileged = cmd.Bool([]string{"-privileged"}, false, "Give extended privileges to this container")
flPidMode = cmd.String([]string{"-pid"}, "", "PID namespace to use")
flUTSMode = cmd.String([]string{"-uts"}, "", "UTS namespace to use")
flPublishAll = cmd.Bool([]string{"P", "-publish-all"}, false, "Publish all exposed ports to random ports")
flStdin = cmd.Bool([]string{"i", "-interactive"}, false, "Keep STDIN open even if not attached")
flTty = cmd.Bool([]string{"t", "-tty"}, false, "Allocate a pseudo-TTY")
flOomKillDisable = cmd.Bool([]string{"-oom-kill-disable"}, false, "Disable OOM Killer")
flContainerIDFile = cmd.String([]string{"-cidfile"}, "", "Write the container ID to the file")
flEntrypoint = cmd.String([]string{"-entrypoint"}, "", "Overwrite the default ENTRYPOINT of the image")
flHostname = cmd.String([]string{"h", "-hostname"}, "", "Container host name")
flMemoryString = cmd.String([]string{"m", "-memory"}, "", "Memory limit")
flMemoryReservation = cmd.String([]string{"-memory-reservation"}, "", "Memory soft limit")
flMemorySwap = cmd.String([]string{"-memory-swap"}, "", "Total memory (memory + swap), '-1' to disable swap")
flKernelMemory = cmd.String([]string{"-kernel-memory"}, "", "Kernel memory limit")
flUser = cmd.String([]string{"u", "-user"}, "", "Username or UID (format: <name|uid>[:<group|gid>])")
flWorkingDir = cmd.String([]string{"w", "-workdir"}, "", "Working directory inside the container")
flCPUShares = cmd.Int64([]string{"#c", "-cpu-shares"}, 0, "CPU shares (relative weight)")
flCPUPeriod = cmd.Int64([]string{"-cpu-period"}, 0, "Limit CPU CFS (Completely Fair Scheduler) period")
flCPUQuota = cmd.Int64([]string{"-cpu-quota"}, 0, "Limit CPU CFS (Completely Fair Scheduler) quota")
flCpusetCpus = cmd.String([]string{"-cpuset-cpus"}, "", "CPUs in which to allow execution (0-3, 0,1)")
flCpusetMems = cmd.String([]string{"-cpuset-mems"}, "", "MEMs in which to allow execution (0-3, 0,1)")
flBlkioWeight = cmd.Uint16([]string{"-blkio-weight"}, 0, "Block IO (relative weight), between 10 and 1000")
flSwappiness = cmd.Int64([]string{"-memory-swappiness"}, -1, "Tuning container memory swappiness (0 to 100)")
flNetMode = cmd.String([]string{"-net"}, "default", "Set the Network for the container")
flMacAddress = cmd.String([]string{"-mac-address"}, "", "Container MAC address (e.g. 92:d0:c6:0a:29:33)")
flIpcMode = cmd.String([]string{"-ipc"}, "", "IPC namespace to use")
flRestartPolicy = cmd.String([]string{"-restart"}, "no", "Restart policy to apply when a container exits")
flReadonlyRootfs = cmd.Bool([]string{"-read-only"}, false, "Mount the container's root filesystem as read only")
flLoggingDriver = cmd.String([]string{"-log-driver"}, "", "Logging driver for container")
flCgroupParent = cmd.String([]string{"-cgroup-parent"}, "", "Optional parent cgroup for the container")
flVolumeDriver = cmd.String([]string{"-volume-driver"}, "", "Optional volume driver for the container")
flStopSignal = cmd.String([]string{"-stop-signal"}, signal.DefaultStopSignal, fmt.Sprintf("Signal to stop a container, %v by default", signal.DefaultStopSignal))
flIsolation = cmd.String([]string{"-isolation"}, "", "Container isolation level")
flShmSize = cmd.String([]string{"-shm-size"}, "", "Size of /dev/shm, default value is 64MB")
)
cmd.Var(&flAttach, []string{"a", "-attach"}, "Attach to STDIN, STDOUT or STDERR")
cmd.Var(&flBlkioWeightDevice, []string{"-blkio-weight-device"}, "Block IO weight (relative device weight)")
cmd.Var(&flVolumes, []string{"v", "-volume"}, "Bind mount a volume")
cmd.Var(&flLinks, []string{"-link"}, "Add link to another container")
cmd.Var(&flDevices, []string{"-device"}, "Add a host device to the container")
cmd.Var(&flLabels, []string{"l", "-label"}, "Set meta data on a container")
cmd.Var(&flLabelsFile, []string{"-label-file"}, "Read in a line delimited file of labels")
cmd.Var(&flEnv, []string{"e", "-env"}, "Set environment variables")
cmd.Var(&flEnvFile, []string{"-env-file"}, "Read in a file of environment variables")
cmd.Var(&flPublish, []string{"p", "-publish"}, "Publish a container's port(s) to the host")
cmd.Var(&flExpose, []string{"-expose"}, "Expose a port or a range of ports")
cmd.Var(&flDNS, []string{"-dns"}, "Set custom DNS servers")
cmd.Var(&flDNSSearch, []string{"-dns-search"}, "Set custom DNS search domains")
cmd.Var(&flDNSOptions, []string{"-dns-opt"}, "Set DNS options")
cmd.Var(&flExtraHosts, []string{"-add-host"}, "Add a custom host-to-IP mapping (host:ip)")
cmd.Var(&flVolumesFrom, []string{"-volumes-from"}, "Mount volumes from the specified container(s)")
cmd.Var(&flCapAdd, []string{"-cap-add"}, "Add Linux capabilities")
cmd.Var(&flCapDrop, []string{"-cap-drop"}, "Drop Linux capabilities")
cmd.Var(&flGroupAdd, []string{"-group-add"}, "Add additional groups to join")
cmd.Var(&flSecurityOpt, []string{"-security-opt"}, "Security Options")
cmd.Var(flUlimits, []string{"-ulimit"}, "Ulimit options")
cmd.Var(&flLoggingOpts, []string{"-log-opt"}, "Log driver options")
cmd.Require(flag.Min, 1)
if err := cmd.ParseFlags(args, true); err != nil {
return nil, nil, cmd, err
}
var (
attachStdin = flAttach.Get("stdin")
attachStdout = flAttach.Get("stdout")
attachStderr = flAttach.Get("stderr")
)
// Validate the input mac address
if *flMacAddress != "" {
if _, err := opts.ValidateMACAddress(*flMacAddress); err != nil {
return nil, nil, cmd, fmt.Errorf("%s is not a valid mac address", *flMacAddress)
}
}
if *flStdin {
attachStdin = true
}
// If -a is not set attach to the output stdio
if flAttach.Len() == 0 {
attachStdout = true
attachStderr = true
}
var err error
var flMemory int64
if *flMemoryString != "" {
flMemory, err = units.RAMInBytes(*flMemoryString)
if err != nil {
return nil, nil, cmd, err
}
}
var MemoryReservation int64
if *flMemoryReservation != "" {
MemoryReservation, err = units.RAMInBytes(*flMemoryReservation)
if err != nil {
return nil, nil, cmd, err
}
}
var memorySwap int64
if *flMemorySwap != "" {
if *flMemorySwap == "-1" {
memorySwap = -1
} else {
memorySwap, err = units.RAMInBytes(*flMemorySwap)
if err != nil {
return nil, nil, cmd, err
}
}
}
var KernelMemory int64
if *flKernelMemory != "" {
KernelMemory, err = units.RAMInBytes(*flKernelMemory)
if err != nil {
return nil, nil, cmd, err
}
}
swappiness := *flSwappiness
if swappiness != -1 && (swappiness < 0 || swappiness > 100) {
return nil, nil, cmd, fmt.Errorf("Invalid value: %d. Valid memory swappiness range is 0-100", swappiness)
}
var parsedShm *int64
if *flShmSize != "" {
shmSize, err := units.RAMInBytes(*flShmSize)
if err != nil {
return nil, nil, cmd, err
}
parsedShm = &shmSize
}
var binds []string
// add any bind targets to the list of container volumes
for bind := range flVolumes.GetMap() {
if arr := volume.SplitN(bind, 2); len(arr) > 1 {
// after creating the bind mount we want to delete it from the flVolumes values because
// we do not want bind mounts being committed to image configs
binds = append(binds, bind)
flVolumes.Delete(bind)
}
}
var (
parsedArgs = cmd.Args()
runCmd *stringutils.StrSlice
entrypoint *stringutils.StrSlice
image = cmd.Arg(0)
)
if len(parsedArgs) > 1 {
runCmd = stringutils.NewStrSlice(parsedArgs[1:]...)
}
if *flEntrypoint != "" {
entrypoint = stringutils.NewStrSlice(*flEntrypoint)
}
var (
domainname string
hostname = *flHostname
parts = strings.SplitN(hostname, ".", 2)
)
if len(parts) > 1 {
hostname = parts[0]
domainname = parts[1]
}
ports, portBindings, err := nat.ParsePortSpecs(flPublish.GetAll())
if err != nil {
return nil, nil, cmd, err
}
// Merge in exposed ports to the map of published ports
for _, e := range flExpose.GetAll() {
if strings.Contains(e, ":") {
return nil, nil, cmd, fmt.Errorf("Invalid port format for --expose: %s", e)
}
//support two formats for expose, original format <portnum>/[<proto>] or <startport-endport>/[<proto>]
proto, port := nat.SplitProtoPort(e)
//parse the start and end port and create a sequence of ports to expose
//if expose a port, the start and end port are the same
start, end, err := parsers.ParsePortRange(port)
if err != nil {
return nil, nil, cmd, fmt.Errorf("Invalid range format for --expose: %s, error: %s", e, err)
}
for i := start; i <= end; i++ {
p, err := nat.NewPort(proto, strconv.FormatUint(i, 10))
if err != nil {
return nil, nil, cmd, err
}
if _, exists := ports[p]; !exists {
ports[p] = struct{}{}
}
}
}
// parse device mappings
deviceMappings := []DeviceMapping{}
for _, device := range flDevices.GetAll() {
deviceMapping, err := ParseDevice(device)
if err != nil {
return nil, nil, cmd, err
}
deviceMappings = append(deviceMappings, deviceMapping)
}
// collect all the environment variables for the container
envVariables, err := readKVStrings(flEnvFile.GetAll(), flEnv.GetAll())
if err != nil {
return nil, nil, cmd, err
}
// collect all the labels for the container
labels, err := readKVStrings(flLabelsFile.GetAll(), flLabels.GetAll())
if err != nil {
return nil, nil, cmd, err
}
ipcMode := IpcMode(*flIpcMode)
if !ipcMode.Valid() {
return nil, nil, cmd, fmt.Errorf("--ipc: invalid IPC mode")
}
pidMode := PidMode(*flPidMode)
if !pidMode.Valid() {
return nil, nil, cmd, fmt.Errorf("--pid: invalid PID mode")
}
utsMode := UTSMode(*flUTSMode)
if !utsMode.Valid() {
return nil, nil, cmd, fmt.Errorf("--uts: invalid UTS mode")
}
restartPolicy, err := ParseRestartPolicy(*flRestartPolicy)
if err != nil {
return nil, nil, cmd, err
}
loggingOpts, err := parseLoggingOpts(*flLoggingDriver, flLoggingOpts.GetAll())
if err != nil {
return nil, nil, cmd, err
}
resources := Resources{
CgroupParent: *flCgroupParent,
Memory: flMemory,
MemoryReservation: MemoryReservation,
MemorySwap: memorySwap,
MemorySwappiness: flSwappiness,
KernelMemory: KernelMemory,
CPUShares: *flCPUShares,
CPUPeriod: *flCPUPeriod,
CpusetCpus: *flCpusetCpus,
CpusetMems: *flCpusetMems,
CPUQuota: *flCPUQuota,
BlkioWeight: *flBlkioWeight,
BlkioWeightDevice: flBlkioWeightDevice.GetList(),
Ulimits: flUlimits.GetList(),
Devices: deviceMappings,
}
config := &Config{
Hostname: hostname,
Domainname: domainname,
ExposedPorts: ports,
User: *flUser,
Tty: *flTty,
// TODO: deprecated, it comes from -n, --networking
// it's still needed internally to set the network to disabled
// if e.g. bridge is none in daemon opts, and in inspect
NetworkDisabled: false,
OpenStdin: *flStdin,
AttachStdin: attachStdin,
AttachStdout: attachStdout,
AttachStderr: attachStderr,
Env: envVariables,
Cmd: runCmd,
Image: image,
Volumes: flVolumes.GetMap(),
MacAddress: *flMacAddress,
Entrypoint: entrypoint,
WorkingDir: *flWorkingDir,
Labels: ConvertKVStringsToMap(labels),
StopSignal: *flStopSignal,
}
hostConfig := &HostConfig{
Binds: binds,
ContainerIDFile: *flContainerIDFile,
OomKillDisable: *flOomKillDisable,
Privileged: *flPrivileged,
PortBindings: portBindings,
Links: flLinks.GetAll(),
PublishAllPorts: *flPublishAll,
// Make sure the dns fields are never nil.
// New containers don't ever have those fields nil,
// but pre created containers can still have those nil values.
// See https://github.com/docker/docker/pull/17779
// for a more detailed explanation on why we don't want that.
DNS: flDNS.GetAllOrEmpty(),
DNSSearch: flDNSSearch.GetAllOrEmpty(),
DNSOptions: flDNSOptions.GetAllOrEmpty(),
ExtraHosts: flExtraHosts.GetAll(),
VolumesFrom: flVolumesFrom.GetAll(),
NetworkMode: NetworkMode(*flNetMode),
IpcMode: ipcMode,
PidMode: pidMode,
UTSMode: utsMode,
CapAdd: stringutils.NewStrSlice(flCapAdd.GetAll()...),
CapDrop: stringutils.NewStrSlice(flCapDrop.GetAll()...),
GroupAdd: flGroupAdd.GetAll(),
RestartPolicy: restartPolicy,
SecurityOpt: flSecurityOpt.GetAll(),
ReadonlyRootfs: *flReadonlyRootfs,
LogConfig: LogConfig{Type: *flLoggingDriver, Config: loggingOpts},
VolumeDriver: *flVolumeDriver,
Isolation: IsolationLevel(*flIsolation),
ShmSize: parsedShm,
Resources: resources,
}
// When allocating stdin in attached mode, close stdin at client disconnect
if config.OpenStdin && config.AttachStdin {
config.StdinOnce = true
}
return config, hostConfig, cmd, nil
}
func Parse(cmd *flag.FlagSet, args []string) (*Config, *HostConfig, *flag.FlagSet, error) {
var (
// FIXME: use utils.ListOpts for attach and volumes?
flAttach = opts.NewListOpts(opts.ValidateAttach)
flVolumes = opts.NewListOpts(opts.ValidatePath)
flLinks = opts.NewListOpts(opts.ValidateLink)
flEnv = opts.NewListOpts(opts.ValidateEnv)
flLabels = opts.NewListOpts(opts.ValidateEnv)
flDevices = opts.NewListOpts(opts.ValidatePath)
ulimits = make(map[string]*ulimit.Ulimit)
flUlimits = opts.NewUlimitOpt(ulimits)
flPublish = opts.NewListOpts(nil)
flExpose = opts.NewListOpts(nil)
flDns = opts.NewListOpts(opts.ValidateIPAddress)
flDnsSearch = opts.NewListOpts(opts.ValidateDnsSearch)
flExtraHosts = opts.NewListOpts(opts.ValidateExtraHost)
flVolumesFrom = opts.NewListOpts(nil)
flLxcOpts = opts.NewListOpts(nil)
flEnvFile = opts.NewListOpts(nil)
flCapAdd = opts.NewListOpts(nil)
flCapDrop = opts.NewListOpts(nil)
flGroupAdd = opts.NewListOpts(nil)
flSecurityOpt = opts.NewListOpts(nil)
flLabelsFile = opts.NewListOpts(nil)
flLoggingOpts = opts.NewListOpts(nil)
flNetwork = cmd.Bool([]string{"#n", "#-networking"}, true, "Enable networking for this container")
flPrivileged = cmd.Bool([]string{"#privileged", "-privileged"}, false, "Give extended privileges to this container")
flPidMode = cmd.String([]string{"-pid"}, "", "PID namespace to use")
flUTSMode = cmd.String([]string{"-uts"}, "", "UTS namespace to use")
flPublishAll = cmd.Bool([]string{"P", "-publish-all"}, false, "Publish all exposed ports to random ports")
flStdin = cmd.Bool([]string{"i", "-interactive"}, false, "Keep STDIN open even if not attached")
flTty = cmd.Bool([]string{"t", "-tty"}, false, "Allocate a pseudo-TTY")
flOomKillDisable = cmd.Bool([]string{"-oom-kill-disable"}, false, "Disable OOM Killer")
flSwappinessStr = cmd.String([]string{"-memory-swappiness"}, "", "Tuning container memory swappiness (0 to 100)")
flContainerIDFile = cmd.String([]string{"#cidfile", "-cidfile"}, "", "Write the container ID to the file")
flEntrypoint = cmd.String([]string{"#entrypoint", "-entrypoint"}, "", "Overwrite the default ENTRYPOINT of the image")
flHostname = cmd.String([]string{"h", "-hostname"}, "", "Container host name")
flMemoryString = cmd.String([]string{"m", "-memory"}, "", "Memory limit")
flMemorySwap = cmd.String([]string{"-memory-swap"}, "", "Total memory (memory + swap), '-1' to disable swap")
flUser = cmd.String([]string{"u", "-user"}, "", "Username or UID (format: <name|uid>[:<group|gid>])")
flWorkingDir = cmd.String([]string{"w", "-workdir"}, "", "Working directory inside the container")
flCpuShares = cmd.Int64([]string{"c", "-cpu-shares"}, 0, "CPU shares (relative weight)")
flCpuPeriod = cmd.Int64([]string{"-cpu-period"}, 0, "Limit CPU CFS (Completely Fair Scheduler) period")
flCpusetCpus = cmd.String([]string{"#-cpuset", "-cpuset-cpus"}, "", "CPUs in which to allow execution (0-3, 0,1)")
flCpusetMems = cmd.String([]string{"-cpuset-mems"}, "", "MEMs in which to allow execution (0-3, 0,1)")
flCpuQuota = cmd.Int64([]string{"-cpu-quota"}, 0, "Limit the CPU CFS quota")
flBlkioWeight = cmd.Int64([]string{"-blkio-weight"}, 0, "Block IO (relative weight), between 10 and 1000")
flNetMode = cmd.String([]string{"-net"}, "default", "Set the Network mode for the container")
flMacAddress = cmd.String([]string{"-mac-address"}, "", "Container MAC address (e.g. 92:d0:c6:0a:29:33)")
flIpcMode = cmd.String([]string{"-ipc"}, "", "IPC namespace to use")
flRestartPolicy = cmd.String([]string{"-restart"}, "no", "Restart policy to apply when a container exits")
flReadonlyRootfs = cmd.Bool([]string{"-read-only"}, false, "Mount the container's root filesystem as read only")
flLoggingDriver = cmd.String([]string{"-log-driver"}, "", "Logging driver for container")
flCgroupParent = cmd.String([]string{"-cgroup-parent"}, "", "Optional parent cgroup for the container")
)
cmd.Var(&flAttach, []string{"a", "-attach"}, "Attach to STDIN, STDOUT or STDERR")
cmd.Var(&flVolumes, []string{"v", "-volume"}, "Bind mount a volume")
cmd.Var(&flLinks, []string{"#link", "-link"}, "Add link to another container")
cmd.Var(&flDevices, []string{"-device"}, "Add a host device to the container")
cmd.Var(&flLabels, []string{"l", "-label"}, "Set meta data on a container")
cmd.Var(&flLabelsFile, []string{"-label-file"}, "Read in a line delimited file of labels")
cmd.Var(&flEnv, []string{"e", "-env"}, "Set environment variables")
cmd.Var(&flEnvFile, []string{"-env-file"}, "Read in a file of environment variables")
cmd.Var(&flPublish, []string{"p", "-publish"}, "Publish a container's port(s) to the host")
cmd.Var(&flExpose, []string{"#expose", "-expose"}, "Expose a port or a range of ports")
cmd.Var(&flDns, []string{"#dns", "-dns"}, "Set custom DNS servers")
cmd.Var(&flDnsSearch, []string{"-dns-search"}, "Set custom DNS search domains")
cmd.Var(&flExtraHosts, []string{"-add-host"}, "Add a custom host-to-IP mapping (host:ip)")
cmd.Var(&flVolumesFrom, []string{"#volumes-from", "-volumes-from"}, "Mount volumes from the specified container(s)")
cmd.Var(&flLxcOpts, []string{"#lxc-conf", "-lxc-conf"}, "Add custom lxc options")
cmd.Var(&flCapAdd, []string{"-cap-add"}, "Add Linux capabilities")
cmd.Var(&flCapDrop, []string{"-cap-drop"}, "Drop Linux capabilities")
cmd.Var(&flGroupAdd, []string{"-group-add"}, "Add additional groups to join")
cmd.Var(&flSecurityOpt, []string{"-security-opt"}, "Security Options")
cmd.Var(flUlimits, []string{"-ulimit"}, "Ulimit options")
cmd.Var(&flLoggingOpts, []string{"-log-opt"}, "Log driver options")
expFlags := attachExperimentalFlags(cmd)
cmd.Require(flag.Min, 1)
if err := cmd.ParseFlags(args, true); err != nil {
return nil, nil, cmd, err
}
var (
attachStdin = flAttach.Get("stdin")
attachStdout = flAttach.Get("stdout")
attachStderr = flAttach.Get("stderr")
)
netMode, err := parseNetMode(*flNetMode)
if err != nil {
return nil, nil, cmd, fmt.Errorf("--net: invalid net mode: %v", err)
}
vals := validateNM{
netMode: netMode,
flHostname: flHostname,
flLinks: flLinks,
flDns: flDns,
flExtraHosts: flExtraHosts,
flMacAddress: flMacAddress,
flPublish: flPublish,
flPublishAll: flPublishAll,
flExpose: flExpose,
}
if err := validateNetMode(&vals); err != nil {
return nil, nil, cmd, err
}
// Validate the input mac address
if *flMacAddress != "" {
if _, err := opts.ValidateMACAddress(*flMacAddress); err != nil {
return nil, nil, cmd, fmt.Errorf("%s is not a valid mac address", *flMacAddress)
}
}
if *flStdin {
attachStdin = true
}
// If -a is not set attach to the output stdio
if flAttach.Len() == 0 {
attachStdout = true
attachStderr = true
}
var flMemory int64
if *flMemoryString != "" {
parsedMemory, err := units.RAMInBytes(*flMemoryString)
if err != nil {
return nil, nil, cmd, err
}
flMemory = parsedMemory
}
var MemorySwap int64
if *flMemorySwap != "" {
if *flMemorySwap == "-1" {
MemorySwap = -1
} else {
parsedMemorySwap, err := units.RAMInBytes(*flMemorySwap)
if err != nil {
return nil, nil, cmd, err
}
MemorySwap = parsedMemorySwap
}
}
var parsedSwappiness int64
var flSwappiness int64
if *flSwappinessStr != "" {
parsedSwappiness, err = strconv.ParseInt(*flSwappinessStr, 10, 64)
if err != nil || parsedSwappiness < 0 || parsedSwappiness > 100 {
return nil, nil, cmd, fmt.Errorf("invalid value:%s. valid memory swappiness range is 0-100", *flSwappinessStr)
}
flSwappiness = parsedSwappiness
} else {
flSwappiness = -1
}
var binds []string
// add any bind targets to the list of container volumes
for bind := range flVolumes.GetMap() {
if arr := strings.Split(bind, ":"); len(arr) > 1 {
if arr[1] == "/" {
return nil, nil, cmd, fmt.Errorf("Invalid bind mount: destination can't be '/'")
}
// after creating the bind mount we want to delete it from the flVolumes values because
// we do not want bind mounts being committed to image configs
binds = append(binds, bind)
flVolumes.Delete(bind)
} else if bind == "/" {
return nil, nil, cmd, fmt.Errorf("Invalid volume: path can't be '/'")
}
}
var (
parsedArgs = cmd.Args()
runCmd *Command
entrypoint *Entrypoint
image = cmd.Arg(0)
)
if len(parsedArgs) > 1 {
runCmd = NewCommand(parsedArgs[1:]...)
}
if *flEntrypoint != "" {
entrypoint = NewEntrypoint(*flEntrypoint)
}
lc, err := parseKeyValueOpts(flLxcOpts)
if err != nil {
return nil, nil, cmd, err
}
lxcConf := NewLxcConfig(lc)
var (
domainname string
hostname = *flHostname
parts = strings.SplitN(hostname, ".", 2)
)
if len(parts) > 1 {
hostname = parts[0]
domainname = parts[1]
}
ports, portBindings, err := nat.ParsePortSpecs(flPublish.GetAll())
if err != nil {
return nil, nil, cmd, err
}
// Merge in exposed ports to the map of published ports
for _, e := range flExpose.GetAll() {
if strings.Contains(e, ":") {
return nil, nil, cmd, fmt.Errorf("Invalid port format for --expose: %s", e)
}
//support two formats for expose, original format <portnum>/[<proto>] or <startport-endport>/[<proto>]
proto, port := nat.SplitProtoPort(e)
//parse the start and end port and create a sequence of ports to expose
//if expose a port, the start and end port are the same
start, end, err := parsers.ParsePortRange(port)
if err != nil {
return nil, nil, cmd, fmt.Errorf("Invalid range format for --expose: %s, error: %s", e, err)
}
for i := start; i <= end; i++ {
p := nat.NewPort(proto, strconv.FormatUint(i, 10))
if _, exists := ports[p]; !exists {
ports[p] = struct{}{}
}
}
}
// parse device mappings
deviceMappings := []DeviceMapping{}
for _, device := range flDevices.GetAll() {
deviceMapping, err := ParseDevice(device)
if err != nil {
return nil, nil, cmd, err
}
deviceMappings = append(deviceMappings, deviceMapping)
}
// collect all the environment variables for the container
envVariables, err := readKVStrings(flEnvFile.GetAll(), flEnv.GetAll())
if err != nil {
return nil, nil, cmd, err
}
// collect all the labels for the container
labels, err := readKVStrings(flLabelsFile.GetAll(), flLabels.GetAll())
if err != nil {
return nil, nil, cmd, err
}
ipcMode := IpcMode(*flIpcMode)
if !ipcMode.Valid() {
return nil, nil, cmd, fmt.Errorf("--ipc: invalid IPC mode")
}
pidMode := PidMode(*flPidMode)
if !pidMode.Valid() {
return nil, nil, cmd, fmt.Errorf("--pid: invalid PID mode")
}
utsMode := UTSMode(*flUTSMode)
if !utsMode.Valid() {
return nil, nil, cmd, fmt.Errorf("--uts: invalid UTS mode")
}
restartPolicy, err := ParseRestartPolicy(*flRestartPolicy)
if err != nil {
return nil, nil, cmd, err
}
loggingOpts, err := parseLoggingOpts(*flLoggingDriver, flLoggingOpts.GetAll())
if err != nil {
return nil, nil, cmd, err
}
config := &Config{
Hostname: hostname,
Domainname: domainname,
ExposedPorts: ports,
User: *flUser,
Tty: *flTty,
NetworkDisabled: !*flNetwork,
OpenStdin: *flStdin,
AttachStdin: attachStdin,
AttachStdout: attachStdout,
AttachStderr: attachStderr,
Env: envVariables,
Cmd: runCmd,
Image: image,
Volumes: flVolumes.GetMap(),
MacAddress: *flMacAddress,
Entrypoint: entrypoint,
WorkingDir: *flWorkingDir,
Labels: convertKVStringsToMap(labels),
}
hostConfig := &HostConfig{
Binds: binds,
ContainerIDFile: *flContainerIDFile,
LxcConf: lxcConf,
Memory: flMemory,
MemorySwap: MemorySwap,
CpuShares: *flCpuShares,
CpuPeriod: *flCpuPeriod,
CpusetCpus: *flCpusetCpus,
CpusetMems: *flCpusetMems,
CpuQuota: *flCpuQuota,
BlkioWeight: *flBlkioWeight,
OomKillDisable: *flOomKillDisable,
MemorySwappiness: flSwappiness,
Privileged: *flPrivileged,
PortBindings: portBindings,
Links: flLinks.GetAll(),
PublishAllPorts: *flPublishAll,
Dns: flDns.GetAll(),
DnsSearch: flDnsSearch.GetAll(),
ExtraHosts: flExtraHosts.GetAll(),
VolumesFrom: flVolumesFrom.GetAll(),
NetworkMode: netMode,
IpcMode: ipcMode,
PidMode: pidMode,
UTSMode: utsMode,
Devices: deviceMappings,
CapAdd: NewCapList(flCapAdd.GetAll()),
CapDrop: NewCapList(flCapDrop.GetAll()),
GroupAdd: flGroupAdd.GetAll(),
RestartPolicy: restartPolicy,
SecurityOpt: flSecurityOpt.GetAll(),
ReadonlyRootfs: *flReadonlyRootfs,
Ulimits: flUlimits.GetList(),
LogConfig: LogConfig{Type: *flLoggingDriver, Config: loggingOpts},
CgroupParent: *flCgroupParent,
}
applyExperimentalFlags(expFlags, config, hostConfig)
// When allocating stdin in attached mode, close stdin at client disconnect
if config.OpenStdin && config.AttachStdin {
config.StdinOnce = true
}
return config, hostConfig, cmd, nil
}
func Parse(cmd *flag.FlagSet, args []string) (*Config, *HostConfig, *flag.FlagSet, error) {
var (
// FIXME: use utils.ListOpts for attach and volumes?
flAttach = opts.NewListOpts(opts.ValidateAttach)
flVolumes = opts.NewListOpts(opts.ValidatePath)
flLinks = opts.NewListOpts(opts.ValidateLink)
flEnv = opts.NewListOpts(opts.ValidateEnv)
flDevices = opts.NewListOpts(opts.ValidatePath)
flPublish = opts.NewListOpts(nil)
flExpose = opts.NewListOpts(nil)
flDns = opts.NewListOpts(opts.ValidateIPAddress)
flDnsSearch = opts.NewListOpts(opts.ValidateDnsSearch)
flExtraHosts = opts.NewListOpts(opts.ValidateExtraHost)
flVolumesFrom = opts.NewListOpts(nil)
flLxcOpts = opts.NewListOpts(nil)
flEnvFile = opts.NewListOpts(nil)
flCapAdd = opts.NewListOpts(nil)
flCapDrop = opts.NewListOpts(nil)
flSecurityOpt = opts.NewListOpts(nil)
flNetwork = cmd.Bool([]string{"#n", "#-networking"}, true, "Enable networking for this container")
flPrivileged = cmd.Bool([]string{"#privileged", "-privileged"}, false, "Give extended privileges to this container")
flPidMode = cmd.String([]string{"-pid"}, "", "PID namespace to use")
flPublishAll = cmd.Bool([]string{"P", "-publish-all"}, false, "Publish all exposed ports to random ports")
flStdin = cmd.Bool([]string{"i", "-interactive"}, false, "Keep STDIN open even if not attached")
flTty = cmd.Bool([]string{"t", "-tty"}, false, "Allocate a pseudo-TTY")
flContainerIDFile = cmd.String([]string{"#cidfile", "-cidfile"}, "", "Write the container ID to the file")
flEntrypoint = cmd.String([]string{"#entrypoint", "-entrypoint"}, "", "Overwrite the default ENTRYPOINT of the image")
flHostname = cmd.String([]string{"h", "-hostname"}, "", "Container host name")
flMemoryString = cmd.String([]string{"m", "-memory"}, "", "Memory limit")
flMemorySwap = cmd.String([]string{"-memory-swap"}, "", "Total memory (memory + swap), '-1' to disable swap")
flUser = cmd.String([]string{"u", "-user"}, "", "Username or UID (format: <name|uid>[:<group|gid>])")
flWorkingDir = cmd.String([]string{"w", "-workdir"}, "", "Working directory inside the container")
flCpuShares = cmd.Int64([]string{"c", "-cpu-shares"}, 0, "CPU shares (relative weight)")
flCpuset = cmd.String([]string{"-cpuset"}, "", "CPUs in which to allow execution (0-3, 0,1)")
flNetMode = cmd.String([]string{"-net"}, "bridge", "Set the Network mode for the container")
flMacAddress = cmd.String([]string{"-mac-address"}, "", "Container MAC address (e.g. 92:d0:c6:0a:29:33)")
flIpcMode = cmd.String([]string{"-ipc"}, "", "IPC namespace to use")
flRestartPolicy = cmd.String([]string{"-restart"}, "", "Restart policy to apply when a container exits")
flReadonlyRootfs = cmd.Bool([]string{"-read-only"}, false, "Mount the container's root filesystem as read only")
)
cmd.Var(&flAttach, []string{"a", "-attach"}, "Attach to STDIN, STDOUT or STDERR.")
cmd.Var(&flVolumes, []string{"v", "-volume"}, "Bind mount a volume")
cmd.Var(&flLinks, []string{"#link", "-link"}, "Add link to another container")
cmd.Var(&flDevices, []string{"-device"}, "Add a host device to the container")
cmd.Var(&flEnv, []string{"e", "-env"}, "Set environment variables")
cmd.Var(&flEnvFile, []string{"-env-file"}, "Read in a file of environment variables")
cmd.Var(&flPublish, []string{"p", "-publish"}, "Publish a container's port(s) to the host")
cmd.Var(&flExpose, []string{"#expose", "-expose"}, "Expose a port or a range of ports")
cmd.Var(&flDns, []string{"#dns", "-dns"}, "Set custom DNS servers")
cmd.Var(&flDnsSearch, []string{"-dns-search"}, "Set custom DNS search domains")
cmd.Var(&flExtraHosts, []string{"-add-host"}, "Add a custom host-to-IP mapping (host:ip)")
cmd.Var(&flVolumesFrom, []string{"#volumes-from", "-volumes-from"}, "Mount volumes from the specified container(s)")
cmd.Var(&flLxcOpts, []string{"#lxc-conf", "-lxc-conf"}, "Add custom lxc options")
cmd.Var(&flCapAdd, []string{"-cap-add"}, "Add Linux capabilities")
cmd.Var(&flCapDrop, []string{"-cap-drop"}, "Drop Linux capabilities")
cmd.Var(&flSecurityOpt, []string{"-security-opt"}, "Security Options")
cmd.Require(flag.Min, 1)
if err := utils.ParseFlags(cmd, args, true); err != nil {
return nil, nil, cmd, err
}
// Validate input params
if *flWorkingDir != "" && !path.IsAbs(*flWorkingDir) {
return nil, nil, cmd, ErrInvalidWorkingDirectory
}
var (
attachStdin = flAttach.Get("stdin")
attachStdout = flAttach.Get("stdout")
attachStderr = flAttach.Get("stderr")
)
if *flNetMode != "bridge" && *flNetMode != "none" && *flHostname != "" {
return nil, nil, cmd, ErrConflictNetworkHostname
}
if *flNetMode == "host" && flLinks.Len() > 0 {
return nil, nil, cmd, ErrConflictHostNetworkAndLinks
}
if *flNetMode == "container" && flLinks.Len() > 0 {
return nil, nil, cmd, ErrConflictContainerNetworkAndLinks
}
if *flNetMode == "host" && flDns.Len() > 0 {
return nil, nil, cmd, ErrConflictHostNetworkAndDns
}
if *flNetMode == "container" && flDns.Len() > 0 {
return nil, nil, cmd, ErrConflictContainerNetworkAndDns
}
// If neither -d or -a are set, attach to everything by default
if flAttach.Len() == 0 {
attachStdout = true
attachStderr = true
if *flStdin {
attachStdin = true
}
}
var flMemory int64
if *flMemoryString != "" {
parsedMemory, err := units.RAMInBytes(*flMemoryString)
if err != nil {
return nil, nil, cmd, err
}
flMemory = parsedMemory
}
var MemorySwap int64
if *flMemorySwap != "" {
if *flMemorySwap == "-1" {
MemorySwap = -1
} else {
parsedMemorySwap, err := units.RAMInBytes(*flMemorySwap)
if err != nil {
return nil, nil, cmd, err
}
MemorySwap = parsedMemorySwap
}
}
var binds []string
// add any bind targets to the list of container volumes
for bind := range flVolumes.GetMap() {
if arr := strings.Split(bind, ":"); len(arr) > 1 {
if arr[1] == "/" {
return nil, nil, cmd, fmt.Errorf("Invalid bind mount: destination can't be '/'")
}
// after creating the bind mount we want to delete it from the flVolumes values because
// we do not want bind mounts being committed to image configs
binds = append(binds, bind)
flVolumes.Delete(bind)
} else if bind == "/" {
return nil, nil, cmd, fmt.Errorf("Invalid volume: path can't be '/'")
}
}
var (
parsedArgs = cmd.Args()
runCmd []string
entrypoint []string
image = cmd.Arg(0)
)
if len(parsedArgs) > 1 {
runCmd = parsedArgs[1:]
}
if *flEntrypoint != "" {
entrypoint = []string{*flEntrypoint}
}
lxcConf, err := parseKeyValueOpts(flLxcOpts)
if err != nil {
return nil, nil, cmd, err
}
var (
domainname string
hostname = *flHostname
parts = strings.SplitN(hostname, ".", 2)
)
if len(parts) > 1 {
hostname = parts[0]
domainname = parts[1]
}
ports, portBindings, err := nat.ParsePortSpecs(flPublish.GetAll())
if err != nil {
return nil, nil, cmd, err
}
// Merge in exposed ports to the map of published ports
for _, e := range flExpose.GetAll() {
if strings.Contains(e, ":") {
return nil, nil, cmd, fmt.Errorf("Invalid port format for --expose: %s", e)
}
//support two formats for expose, original format <portnum>/[<proto>] or <startport-endport>/[<proto>]
proto, port := nat.SplitProtoPort(e)
//parse the start and end port and create a sequence of ports to expose
//if expose a port, the start and end port are the same
start, end, err := parsers.ParsePortRange(port)
if err != nil {
return nil, nil, cmd, fmt.Errorf("Invalid range format for --expose: %s, error: %s", e, err)
}
for i := start; i <= end; i++ {
p := nat.NewPort(proto, strconv.FormatUint(i, 10))
if _, exists := ports[p]; !exists {
ports[p] = struct{}{}
}
}
}
// parse device mappings
deviceMappings := []DeviceMapping{}
for _, device := range flDevices.GetAll() {
deviceMapping, err := ParseDevice(device)
if err != nil {
return nil, nil, cmd, err
}
deviceMappings = append(deviceMappings, deviceMapping)
}
// collect all the environment variables for the container
envVariables := []string{}
for _, ef := range flEnvFile.GetAll() {
parsedVars, err := opts.ParseEnvFile(ef)
if err != nil {
return nil, nil, cmd, err
}
envVariables = append(envVariables, parsedVars...)
}
// parse the '-e' and '--env' after, to allow override
envVariables = append(envVariables, flEnv.GetAll()...)
ipcMode := IpcMode(*flIpcMode)
if !ipcMode.Valid() {
return nil, nil, cmd, fmt.Errorf("--ipc: invalid IPC mode")
}
pidMode := PidMode(*flPidMode)
if !pidMode.Valid() {
return nil, nil, cmd, fmt.Errorf("--pid: invalid PID mode")
}
netMode, err := parseNetMode(*flNetMode)
if err != nil {
return nil, nil, cmd, fmt.Errorf("--net: invalid net mode: %v", err)
}
restartPolicy, err := parseRestartPolicy(*flRestartPolicy)
if err != nil {
return nil, nil, cmd, err
}
config := &Config{
Hostname: hostname,
Domainname: domainname,
PortSpecs: nil, // Deprecated
ExposedPorts: ports,
User: *flUser,
Tty: *flTty,
NetworkDisabled: !*flNetwork,
OpenStdin: *flStdin,
Memory: flMemory,
MemorySwap: MemorySwap,
CpuShares: *flCpuShares,
Cpuset: *flCpuset,
AttachStdin: attachStdin,
AttachStdout: attachStdout,
AttachStderr: attachStderr,
Env: envVariables,
Cmd: runCmd,
Image: image,
Volumes: flVolumes.GetMap(),
MacAddress: *flMacAddress,
Entrypoint: entrypoint,
WorkingDir: *flWorkingDir,
}
hostConfig := &HostConfig{
Binds: binds,
ContainerIDFile: *flContainerIDFile,
LxcConf: lxcConf,
Privileged: *flPrivileged,
PortBindings: portBindings,
Links: flLinks.GetAll(),
PublishAllPorts: *flPublishAll,
Dns: flDns.GetAll(),
DnsSearch: flDnsSearch.GetAll(),
ExtraHosts: flExtraHosts.GetAll(),
VolumesFrom: flVolumesFrom.GetAll(),
NetworkMode: netMode,
IpcMode: ipcMode,
PidMode: pidMode,
Devices: deviceMappings,
CapAdd: flCapAdd.GetAll(),
CapDrop: flCapDrop.GetAll(),
RestartPolicy: restartPolicy,
SecurityOpt: flSecurityOpt.GetAll(),
ReadonlyRootfs: *flReadonlyRootfs,
}
// When allocating stdin in attached mode, close stdin at client disconnect
if config.OpenStdin && config.AttachStdin {
config.StdinOnce = true
}
return config, hostConfig, cmd, nil
}
func Parse(cmd *flag.FlagSet, args []string, sysInfo *sysinfo.SysInfo) (*Config, *HostConfig, *flag.FlagSet, error) {
var (
// FIXME: use utils.ListOpts for attach and volumes?
flAttach = opts.NewListOpts(opts.ValidateAttach)
flVolumes = opts.NewListOpts(opts.ValidatePath)
flLinks = opts.NewListOpts(opts.ValidateLink)
flEnv = opts.NewListOpts(opts.ValidateEnv)
flDevices = opts.NewListOpts(opts.ValidatePath)
flPublish = opts.NewListOpts(nil)
flExpose = opts.NewListOpts(nil)
flDns = opts.NewListOpts(opts.ValidateIPAddress)
flDnsSearch = opts.NewListOpts(opts.ValidateDnsSearch)
flExtraHosts = opts.NewListOpts(opts.ValidateExtraHost)
flVolumesFrom = opts.NewListOpts(nil)
flLxcOpts = opts.NewListOpts(nil)
flEnvFile = opts.NewListOpts(nil)
flCapAdd = opts.NewListOpts(nil)
flCapDrop = opts.NewListOpts(nil)
flSecurityOpt = opts.NewListOpts(nil)
flNetwork = cmd.Bool([]string{"#n", "#-networking"}, true, "Enable networking for this container")
flPrivileged = cmd.Bool([]string{"#privileged", "-privileged"}, false, "Give extended privileges to this container")
flPublishAll = cmd.Bool([]string{"P", "-publish-all"}, false, "Publish all exposed ports to the host interfaces")
flStdin = cmd.Bool([]string{"i", "-interactive"}, false, "Keep STDIN open even if not attached")
flTty = cmd.Bool([]string{"t", "-tty"}, false, "Allocate a pseudo-TTY")
flContainerIDFile = cmd.String([]string{"#cidfile", "-cidfile"}, "", "Write the container ID to the file")
flEntrypoint = cmd.String([]string{"#entrypoint", "-entrypoint"}, "", "Overwrite the default ENTRYPOINT of the image")
flHostname = cmd.String([]string{"h", "-hostname"}, "", "Container host name")
flMemoryString = cmd.String([]string{"m", "-memory"}, "", "Memory limit (format: <number><optional unit>, where unit = b, k, m or g)")
flUser = cmd.String([]string{"u", "-user"}, "", "Username or UID")
flWorkingDir = cmd.String([]string{"w", "-workdir"}, "", "Working directory inside the container")
flCpuShares = cmd.Int64([]string{"c", "-cpu-shares"}, 0, "CPU shares (relative weight)")
flCpuset = cmd.String([]string{"-cpuset"}, "", "CPUs in which to allow execution (0-3, 0,1)")
flNetMode = cmd.String([]string{"-net"}, "bridge", "Set the Network mode for the container\n'bridge': creates a new network stack for the container on the docker bridge\n'none': no networking for this container\n'container:<name|id>': reuses another container network stack\n'host': use the host network stack inside the container. Note: the host mode gives the container full access to local system services such as D-bus and is therefore considered insecure.")
flRestartPolicy = cmd.String([]string{"-restart"}, "", "Restart policy to apply when a container exits (no, on-failure[:max-retry], always)")
flMonitorDriver = cmd.String([]string{"-mon"}, "builtin", "Monitor driver")
)
cmd.Var(&flAttach, []string{"a", "-attach"}, "Attach to STDIN, STDOUT or STDERR.")
cmd.Var(&flVolumes, []string{"v", "-volume"}, "Bind mount a volume (e.g., from the host: -v /host:/container, from Docker: -v /container)")
cmd.Var(&flLinks, []string{"#link", "-link"}, "Add link to another container in the form of name:alias")
cmd.Var(&flDevices, []string{"-device"}, "Add a host device to the container (e.g. --device=/dev/sdc:/dev/xvdc)")
cmd.Var(&flEnv, []string{"e", "-env"}, "Set environment variables")
cmd.Var(&flEnvFile, []string{"-env-file"}, "Read in a line delimited file of environment variables")
cmd.Var(&flPublish, []string{"p", "-publish"}, fmt.Sprintf("Publish a container's port to the host\nformat: %s\n(use 'docker port' to see the actual mapping)", nat.PortSpecTemplateFormat))
cmd.Var(&flExpose, []string{"#expose", "-expose"}, "Expose a port from the container without publishing it to your host")
cmd.Var(&flDns, []string{"#dns", "-dns"}, "Set custom DNS servers")
cmd.Var(&flDnsSearch, []string{"-dns-search"}, "Set custom DNS search domains")
cmd.Var(&flExtraHosts, []string{"-add-host"}, "Add a custom host-to-IP mapping (host:ip)")
cmd.Var(&flVolumesFrom, []string{"#volumes-from", "-volumes-from"}, "Mount volumes from the specified container(s)")
cmd.Var(&flLxcOpts, []string{"#lxc-conf", "-lxc-conf"}, "(lxc exec-driver only) Add custom lxc options --lxc-conf=\"lxc.cgroup.cpuset.cpus = 0,1\"")
cmd.Var(&flCapAdd, []string{"-cap-add"}, "Add Linux capabilities")
cmd.Var(&flCapDrop, []string{"-cap-drop"}, "Drop Linux capabilities")
cmd.Var(&flSecurityOpt, []string{"-security-opt"}, "Security Options")
if err := cmd.Parse(args); err != nil {
return nil, nil, cmd, err
}
// Check if the kernel supports memory limit cgroup.
if sysInfo != nil && *flMemoryString != "" && !sysInfo.MemoryLimit {
*flMemoryString = ""
}
// Validate input params
if *flWorkingDir != "" && !path.IsAbs(*flWorkingDir) {
return nil, nil, cmd, ErrInvalidWorkingDirectory
}
var (
attachStdin = flAttach.Get("stdin")
attachStdout = flAttach.Get("stdout")
attachStderr = flAttach.Get("stderr")
)
if *flNetMode != "bridge" && *flNetMode != "none" && *flHostname != "" {
return nil, nil, cmd, ErrConflictNetworkHostname
}
if *flNetMode == "host" && flLinks.Len() > 0 {
return nil, nil, cmd, ErrConflictHostNetworkAndLinks
}
if *flNetMode == "container" && flLinks.Len() > 0 {
return nil, nil, cmd, ErrConflictContainerNetworkAndLinks
}
if *flNetMode == "host" && flDns.Len() > 0 {
return nil, nil, cmd, ErrConflictHostNetworkAndDns
}
if *flNetMode == "container" && flDns.Len() > 0 {
return nil, nil, cmd, ErrConflictContainerNetworkAndDns
}
// If neither -d or -a are set, attach to everything by default
if flAttach.Len() == 0 {
attachStdout = true
attachStderr = true
if *flStdin {
attachStdin = true
}
}
var flMemory int64
if *flMemoryString != "" {
parsedMemory, err := units.RAMInBytes(*flMemoryString)
if err != nil {
return nil, nil, cmd, err
}
flMemory = parsedMemory
}
var binds []string
// add any bind targets to the list of container volumes
for bind := range flVolumes.GetMap() {
if arr := strings.Split(bind, ":"); len(arr) > 1 {
if arr[1] == "/" {
return nil, nil, cmd, fmt.Errorf("Invalid bind mount: destination can't be '/'")
}
// after creating the bind mount we want to delete it from the flVolumes values because
// we do not want bind mounts being committed to image configs
binds = append(binds, bind)
flVolumes.Delete(bind)
} else if bind == "/" {
return nil, nil, cmd, fmt.Errorf("Invalid volume: path can't be '/'")
}
}
var (
parsedArgs = cmd.Args()
runCmd []string
entrypoint []string
image string
)
if len(parsedArgs) >= 1 {
image = cmd.Arg(0)
}
if len(parsedArgs) > 1 {
runCmd = parsedArgs[1:]
}
if *flEntrypoint != "" {
entrypoint = []string{*flEntrypoint}
}
lxcConf, err := parseKeyValueOpts(flLxcOpts)
if err != nil {
return nil, nil, cmd, err
}
var (
domainname string
hostname = *flHostname
parts = strings.SplitN(hostname, ".", 2)
)
if len(parts) > 1 {
hostname = parts[0]
domainname = parts[1]
}
ports, portBindings, err := nat.ParsePortSpecs(flPublish.GetAll())
if err != nil {
return nil, nil, cmd, err
}
// Merge in exposed ports to the map of published ports
for _, e := range flExpose.GetAll() {
if strings.Contains(e, ":") {
return nil, nil, cmd, fmt.Errorf("Invalid port format for --expose: %s", e)
}
p := nat.NewPort(nat.SplitProtoPort(e))
if _, exists := ports[p]; !exists {
ports[p] = struct{}{}
}
}
// parse device mappings
deviceMappings := []DeviceMapping{}
for _, device := range flDevices.GetAll() {
deviceMapping, err := ParseDevice(device)
if err != nil {
return nil, nil, cmd, err
}
deviceMappings = append(deviceMappings, deviceMapping)
}
// collect all the environment variables for the container
envVariables := []string{}
for _, ef := range flEnvFile.GetAll() {
parsedVars, err := opts.ParseEnvFile(ef)
if err != nil {
return nil, nil, cmd, err
}
envVariables = append(envVariables, parsedVars...)
}
// parse the '-e' and '--env' after, to allow override
envVariables = append(envVariables, flEnv.GetAll()...)
netMode, err := parseNetMode(*flNetMode)
if err != nil {
return nil, nil, cmd, fmt.Errorf("--net: invalid net mode: %v", err)
}
restartPolicy, err := parseRestartPolicy(*flRestartPolicy)
if err != nil {
return nil, nil, cmd, err
}
config := &Config{
Hostname: hostname,
Domainname: domainname,
PortSpecs: nil, // Deprecated
ExposedPorts: ports,
User: *flUser,
Tty: *flTty,
NetworkDisabled: !*flNetwork,
OpenStdin: *flStdin,
Memory: flMemory,
CpuShares: *flCpuShares,
Cpuset: *flCpuset,
AttachStdin: attachStdin,
AttachStdout: attachStdout,
AttachStderr: attachStderr,
Env: envVariables,
Cmd: runCmd,
Image: image,
Volumes: flVolumes.GetMap(),
Entrypoint: entrypoint,
WorkingDir: *flWorkingDir,
MonitorDriver: *flMonitorDriver,
}
hostConfig := &HostConfig{
Binds: binds,
ContainerIDFile: *flContainerIDFile,
LxcConf: lxcConf,
Privileged: *flPrivileged,
PortBindings: portBindings,
Links: flLinks.GetAll(),
PublishAllPorts: *flPublishAll,
Dns: flDns.GetAll(),
DnsSearch: flDnsSearch.GetAll(),
ExtraHosts: flExtraHosts.GetAll(),
VolumesFrom: flVolumesFrom.GetAll(),
NetworkMode: netMode,
Devices: deviceMappings,
CapAdd: flCapAdd.GetAll(),
CapDrop: flCapDrop.GetAll(),
RestartPolicy: restartPolicy,
SecurityOpt: flSecurityOpt.GetAll(),
}
if sysInfo != nil && flMemory > 0 && !sysInfo.SwapLimit {
//fmt.Fprintf(stdout, "WARNING: Your kernel does not support swap limit capabilities. Limitation discarded.\n")
config.MemorySwap = -1
}
// When allocating stdin in attached mode, close stdin at client disconnect
if config.OpenStdin && config.AttachStdin {
config.StdinOnce = true
}
return config, hostConfig, cmd, nil
}
// Parse parses the specified args for the specified command and generates a Config,
// a HostConfig and returns them with the specified command.
// If the specified args are not valid, it will return an error.
func Parse(cmd *flag.FlagSet, args []string) (*container.Config, *container.HostConfig, *networktypes.NetworkingConfig, *flag.FlagSet, error) {
var (
// FIXME: use utils.ListOpts for attach and volumes?
flAttach = opts.NewListOpts(ValidateAttach)
flVolumes = opts.NewListOpts(nil)
flTmpfs = opts.NewListOpts(nil)
flBlkioWeightDevice = NewWeightdeviceOpt(ValidateWeightDevice)
flDeviceReadBps = NewThrottledeviceOpt(ValidateThrottleBpsDevice)
flDeviceWriteBps = NewThrottledeviceOpt(ValidateThrottleBpsDevice)
flLinks = opts.NewListOpts(ValidateLink)
flAliases = opts.NewListOpts(nil)
flDeviceReadIOps = NewThrottledeviceOpt(ValidateThrottleIOpsDevice)
flDeviceWriteIOps = NewThrottledeviceOpt(ValidateThrottleIOpsDevice)
flEnv = opts.NewListOpts(ValidateEnv)
flLabels = opts.NewListOpts(ValidateEnv)
flDevices = opts.NewListOpts(ValidateDevice)
flUlimits = NewUlimitOpt(nil)
flPublish = opts.NewListOpts(nil)
flExpose = opts.NewListOpts(nil)
flDNS = opts.NewListOpts(opts.ValidateIPAddress)
flDNSSearch = opts.NewListOpts(opts.ValidateDNSSearch)
flDNSOptions = opts.NewListOpts(nil)
flExtraHosts = opts.NewListOpts(ValidateExtraHost)
flVolumesFrom = opts.NewListOpts(nil)
flEnvFile = opts.NewListOpts(nil)
flCapAdd = opts.NewListOpts(nil)
flCapDrop = opts.NewListOpts(nil)
flGroupAdd = opts.NewListOpts(nil)
flSecurityOpt = opts.NewListOpts(nil)
flStorageOpt = opts.NewListOpts(nil)
flLabelsFile = opts.NewListOpts(nil)
flLoggingOpts = opts.NewListOpts(nil)
flPrivileged = cmd.Bool([]string{"-privileged"}, false, "Give extended privileges to this container")
flPidMode = cmd.String([]string{"-pid"}, "", "PID namespace to use")
flUTSMode = cmd.String([]string{"-uts"}, "", "UTS namespace to use")
flUsernsMode = cmd.String([]string{"-userns"}, "", "User namespace to use")
flPublishAll = cmd.Bool([]string{"P", "-publish-all"}, false, "Publish all exposed ports to random ports")
flStdin = cmd.Bool([]string{"i", "-interactive"}, false, "Keep STDIN open even if not attached")
flTty = cmd.Bool([]string{"t", "-tty"}, false, "Allocate a pseudo-TTY")
flOomKillDisable = cmd.Bool([]string{"-oom-kill-disable"}, false, "Disable OOM Killer")
flOomScoreAdj = cmd.Int([]string{"-oom-score-adj"}, 0, "Tune host's OOM preferences (-1000 to 1000)")
flContainerIDFile = cmd.String([]string{"-cidfile"}, "", "Write the container ID to the file")
flEntrypoint = cmd.String([]string{"-entrypoint"}, "", "Overwrite the default ENTRYPOINT of the image")
flHostname = cmd.String([]string{"h", "-hostname"}, "", "Container host name")
flMemoryString = cmd.String([]string{"m", "-memory"}, "", "Memory limit")
flMemoryReservation = cmd.String([]string{"-memory-reservation"}, "", "Memory soft limit")
flMemorySwap = cmd.String([]string{"-memory-swap"}, "", "Swap limit equal to memory plus swap: '-1' to enable unlimited swap")
flKernelMemory = cmd.String([]string{"-kernel-memory"}, "", "Kernel memory limit")
flUser = cmd.String([]string{"u", "-user"}, "", "Username or UID (format: <name|uid>[:<group|gid>])")
flWorkingDir = cmd.String([]string{"w", "-workdir"}, "", "Working directory inside the container")
flCPUShares = cmd.Int64([]string{"#c", "-cpu-shares"}, 0, "CPU shares (relative weight)")
flCPUPeriod = cmd.Int64([]string{"-cpu-period"}, 0, "Limit CPU CFS (Completely Fair Scheduler) period")
flCPUQuota = cmd.Int64([]string{"-cpu-quota"}, 0, "Limit CPU CFS (Completely Fair Scheduler) quota")
flCpusetCpus = cmd.String([]string{"-cpuset-cpus"}, "", "CPUs in which to allow execution (0-3, 0,1)")
flCpusetMems = cmd.String([]string{"-cpuset-mems"}, "", "MEMs in which to allow execution (0-3, 0,1)")
flBlkioWeight = cmd.Uint16([]string{"-blkio-weight"}, 0, "Block IO (relative weight), between 10 and 1000")
flSwappiness = cmd.Int64([]string{"-memory-swappiness"}, -1, "Tune container memory swappiness (0 to 100)")
flNetMode = cmd.String([]string{"-net"}, "default", "Connect a container to a network")
flMacAddress = cmd.String([]string{"-mac-address"}, "", "Container MAC address (e.g. 92:d0:c6:0a:29:33)")
flIPv4Address = cmd.String([]string{"-ip"}, "", "Container IPv4 address (e.g. 172.30.100.104)")
flIPv6Address = cmd.String([]string{"-ip6"}, "", "Container IPv6 address (e.g. 2001:db8::33)")
flIpcMode = cmd.String([]string{"-ipc"}, "", "IPC namespace to use")
flPidsLimit = cmd.Int64([]string{"-pids-limit"}, 0, "Tune container pids limit (set -1 for unlimited)")
flRestartPolicy = cmd.String([]string{"-restart"}, "no", "Restart policy to apply when a container exits")
flReadonlyRootfs = cmd.Bool([]string{"-read-only"}, false, "Mount the container's root filesystem as read only")
flLoggingDriver = cmd.String([]string{"-log-driver"}, "", "Logging driver for container")
flCgroupParent = cmd.String([]string{"-cgroup-parent"}, "", "Optional parent cgroup for the container")
flVolumeDriver = cmd.String([]string{"-volume-driver"}, "", "Optional volume driver for the container")
flStopSignal = cmd.String([]string{"-stop-signal"}, signal.DefaultStopSignal, fmt.Sprintf("Signal to stop a container, %v by default", signal.DefaultStopSignal))
flIsolation = cmd.String([]string{"-isolation"}, "", "Container isolation technology")
flShmSize = cmd.String([]string{"-shm-size"}, "", "Size of /dev/shm, default value is 64MB")
)
cmd.Var(&flAttach, []string{"a", "-attach"}, "Attach to STDIN, STDOUT or STDERR")
cmd.Var(&flBlkioWeightDevice, []string{"-blkio-weight-device"}, "Block IO weight (relative device weight)")
cmd.Var(&flDeviceReadBps, []string{"-device-read-bps"}, "Limit read rate (bytes per second) from a device")
cmd.Var(&flDeviceWriteBps, []string{"-device-write-bps"}, "Limit write rate (bytes per second) to a device")
cmd.Var(&flDeviceReadIOps, []string{"-device-read-iops"}, "Limit read rate (IO per second) from a device")
cmd.Var(&flDeviceWriteIOps, []string{"-device-write-iops"}, "Limit write rate (IO per second) to a device")
cmd.Var(&flVolumes, []string{"v", "-volume"}, "Bind mount a volume")
cmd.Var(&flTmpfs, []string{"-tmpfs"}, "Mount a tmpfs directory")
cmd.Var(&flLinks, []string{"-link"}, "Add link to another container")
cmd.Var(&flAliases, []string{"-net-alias"}, "Add network-scoped alias for the container")
cmd.Var(&flDevices, []string{"-device"}, "Add a host device to the container")
cmd.Var(&flLabels, []string{"l", "-label"}, "Set meta data on a container")
cmd.Var(&flLabelsFile, []string{"-label-file"}, "Read in a line delimited file of labels")
cmd.Var(&flEnv, []string{"e", "-env"}, "Set environment variables")
cmd.Var(&flEnvFile, []string{"-env-file"}, "Read in a file of environment variables")
cmd.Var(&flPublish, []string{"p", "-publish"}, "Publish a container's port(s) to the host")
cmd.Var(&flExpose, []string{"-expose"}, "Expose a port or a range of ports")
cmd.Var(&flDNS, []string{"-dns"}, "Set custom DNS servers")
cmd.Var(&flDNSSearch, []string{"-dns-search"}, "Set custom DNS search domains")
cmd.Var(&flDNSOptions, []string{"-dns-opt"}, "Set DNS options")
cmd.Var(&flExtraHosts, []string{"-add-host"}, "Add a custom host-to-IP mapping (host:ip)")
cmd.Var(&flVolumesFrom, []string{"-volumes-from"}, "Mount volumes from the specified container(s)")
cmd.Var(&flCapAdd, []string{"-cap-add"}, "Add Linux capabilities")
cmd.Var(&flCapDrop, []string{"-cap-drop"}, "Drop Linux capabilities")
cmd.Var(&flGroupAdd, []string{"-group-add"}, "Add additional groups to join")
cmd.Var(&flSecurityOpt, []string{"-security-opt"}, "Security Options")
cmd.Var(&flStorageOpt, []string{"-storage-opt"}, "Set storage driver options per container")
cmd.Var(flUlimits, []string{"-ulimit"}, "Ulimit options")
cmd.Var(&flLoggingOpts, []string{"-log-opt"}, "Log driver options")
cmd.Require(flag.Min, 1)
if err := cmd.ParseFlags(args, true); err != nil {
return nil, nil, nil, cmd, err
}
var (
attachStdin = flAttach.Get("stdin")
attachStdout = flAttach.Get("stdout")
attachStderr = flAttach.Get("stderr")
)
// Validate the input mac address
if *flMacAddress != "" {
if _, err := ValidateMACAddress(*flMacAddress); err != nil {
return nil, nil, nil, cmd, fmt.Errorf("%s is not a valid mac address", *flMacAddress)
}
}
if *flStdin {
attachStdin = true
}
// If -a is not set attach to the output stdio
if flAttach.Len() == 0 {
attachStdout = true
attachStderr = true
}
var err error
var flMemory int64
if *flMemoryString != "" {
flMemory, err = units.RAMInBytes(*flMemoryString)
if err != nil {
return nil, nil, nil, cmd, err
}
}
var MemoryReservation int64
if *flMemoryReservation != "" {
MemoryReservation, err = units.RAMInBytes(*flMemoryReservation)
if err != nil {
return nil, nil, nil, cmd, err
}
}
var memorySwap int64
if *flMemorySwap != "" {
if *flMemorySwap == "-1" {
memorySwap = -1
} else {
memorySwap, err = units.RAMInBytes(*flMemorySwap)
if err != nil {
return nil, nil, nil, cmd, err
}
}
}
var KernelMemory int64
if *flKernelMemory != "" {
KernelMemory, err = units.RAMInBytes(*flKernelMemory)
if err != nil {
return nil, nil, nil, cmd, err
}
}
swappiness := *flSwappiness
if swappiness != -1 && (swappiness < 0 || swappiness > 100) {
return nil, nil, nil, cmd, fmt.Errorf("invalid value: %d. Valid memory swappiness range is 0-100", swappiness)
}
var shmSize int64
if *flShmSize != "" {
shmSize, err = units.RAMInBytes(*flShmSize)
if err != nil {
return nil, nil, nil, cmd, err
}
}
var binds []string
// add any bind targets to the list of container volumes
for bind := range flVolumes.GetMap() {
if arr := volumeSplitN(bind, 2); len(arr) > 1 {
// after creating the bind mount we want to delete it from the flVolumes values because
// we do not want bind mounts being committed to image configs
binds = append(binds, bind)
flVolumes.Delete(bind)
}
}
// Can't evaluate options passed into --tmpfs until we actually mount
tmpfs := make(map[string]string)
for _, t := range flTmpfs.GetAll() {
if arr := strings.SplitN(t, ":", 2); len(arr) > 1 {
if _, _, err := mount.ParseTmpfsOptions(arr[1]); err != nil {
return nil, nil, nil, cmd, err
}
tmpfs[arr[0]] = arr[1]
} else {
tmpfs[arr[0]] = ""
}
}
var (
parsedArgs = cmd.Args()
runCmd strslice.StrSlice
entrypoint strslice.StrSlice
image = cmd.Arg(0)
)
if len(parsedArgs) > 1 {
runCmd = strslice.StrSlice(parsedArgs[1:])
}
if *flEntrypoint != "" {
entrypoint = strslice.StrSlice{*flEntrypoint}
}
// Validate if the given hostname is RFC 1123 (https://tools.ietf.org/html/rfc1123) compliant.
hostname := *flHostname
if hostname != "" {
// Linux hostname is limited to HOST_NAME_MAX=64, not not including the terminating null byte.
matched, _ := regexp.MatchString("^(([[:alnum:]]|[[:alnum:]][[:alnum:]\\-]*[[:alnum:]])\\.)*([[:alnum:]]|[[:alnum:]][[:alnum:]\\-]*[[:alnum:]])$", hostname)
if len(hostname) > 64 || !matched {
return nil, nil, nil, cmd, fmt.Errorf("invalid hostname format for --hostname: %s", hostname)
}
}
ports, portBindings, err := nat.ParsePortSpecs(flPublish.GetAll())
if err != nil {
return nil, nil, nil, cmd, err
}
// Merge in exposed ports to the map of published ports
for _, e := range flExpose.GetAll() {
if strings.Contains(e, ":") {
return nil, nil, nil, cmd, fmt.Errorf("invalid port format for --expose: %s", e)
}
//support two formats for expose, original format <portnum>/[<proto>] or <startport-endport>/[<proto>]
proto, port := nat.SplitProtoPort(e)
//parse the start and end port and create a sequence of ports to expose
//if expose a port, the start and end port are the same
start, end, err := nat.ParsePortRange(port)
if err != nil {
return nil, nil, nil, cmd, fmt.Errorf("invalid range format for --expose: %s, error: %s", e, err)
}
for i := start; i <= end; i++ {
p, err := nat.NewPort(proto, strconv.FormatUint(i, 10))
if err != nil {
return nil, nil, nil, cmd, err
}
if _, exists := ports[p]; !exists {
ports[p] = struct{}{}
}
}
}
// parse device mappings
deviceMappings := []container.DeviceMapping{}
for _, device := range flDevices.GetAll() {
deviceMapping, err := ParseDevice(device)
if err != nil {
return nil, nil, nil, cmd, err
}
deviceMappings = append(deviceMappings, deviceMapping)
}
// collect all the environment variables for the container
envVariables, err := readKVStrings(flEnvFile.GetAll(), flEnv.GetAll())
if err != nil {
return nil, nil, nil, cmd, err
}
// collect all the labels for the container
labels, err := readKVStrings(flLabelsFile.GetAll(), flLabels.GetAll())
if err != nil {
return nil, nil, nil, cmd, err
}
ipcMode := container.IpcMode(*flIpcMode)
if !ipcMode.Valid() {
return nil, nil, nil, cmd, fmt.Errorf("--ipc: invalid IPC mode")
}
pidMode := container.PidMode(*flPidMode)
if !pidMode.Valid() {
return nil, nil, nil, cmd, fmt.Errorf("--pid: invalid PID mode")
}
utsMode := container.UTSMode(*flUTSMode)
if !utsMode.Valid() {
return nil, nil, nil, cmd, fmt.Errorf("--uts: invalid UTS mode")
}
usernsMode := container.UsernsMode(*flUsernsMode)
if !usernsMode.Valid() {
return nil, nil, nil, cmd, fmt.Errorf("--userns: invalid USER mode")
}
restartPolicy, err := ParseRestartPolicy(*flRestartPolicy)
if err != nil {
return nil, nil, nil, cmd, err
}
loggingOpts, err := parseLoggingOpts(*flLoggingDriver, flLoggingOpts.GetAll())
if err != nil {
return nil, nil, nil, cmd, err
}
securityOpts, err := parseSecurityOpts(flSecurityOpt.GetAll())
if err != nil {
return nil, nil, nil, cmd, err
}
storageOpts, err := parseStorageOpts(flStorageOpt.GetAll())
if err != nil {
return nil, nil, nil, cmd, err
}
resources := container.Resources{
CgroupParent: *flCgroupParent,
Memory: flMemory,
MemoryReservation: MemoryReservation,
MemorySwap: memorySwap,
MemorySwappiness: flSwappiness,
KernelMemory: KernelMemory,
OomKillDisable: flOomKillDisable,
CPUShares: *flCPUShares,
CPUPeriod: *flCPUPeriod,
CpusetCpus: *flCpusetCpus,
CpusetMems: *flCpusetMems,
CPUQuota: *flCPUQuota,
PidsLimit: *flPidsLimit,
BlkioWeight: *flBlkioWeight,
BlkioWeightDevice: flBlkioWeightDevice.GetList(),
BlkioDeviceReadBps: flDeviceReadBps.GetList(),
BlkioDeviceWriteBps: flDeviceWriteBps.GetList(),
BlkioDeviceReadIOps: flDeviceReadIOps.GetList(),
BlkioDeviceWriteIOps: flDeviceWriteIOps.GetList(),
Ulimits: flUlimits.GetList(),
Devices: deviceMappings,
}
config := &container.Config{
Hostname: *flHostname,
ExposedPorts: ports,
User: *flUser,
Tty: *flTty,
// TODO: deprecated, it comes from -n, --networking
// it's still needed internally to set the network to disabled
// if e.g. bridge is none in daemon opts, and in inspect
NetworkDisabled: false,
OpenStdin: *flStdin,
AttachStdin: attachStdin,
AttachStdout: attachStdout,
AttachStderr: attachStderr,
Env: envVariables,
Cmd: runCmd,
Image: image,
Volumes: flVolumes.GetMap(),
MacAddress: *flMacAddress,
Entrypoint: entrypoint,
WorkingDir: *flWorkingDir,
Labels: ConvertKVStringsToMap(labels),
}
if cmd.IsSet("-stop-signal") {
config.StopSignal = *flStopSignal
}
hostConfig := &container.HostConfig{
Binds: binds,
ContainerIDFile: *flContainerIDFile,
OomScoreAdj: *flOomScoreAdj,
Privileged: *flPrivileged,
PortBindings: portBindings,
Links: flLinks.GetAll(),
PublishAllPorts: *flPublishAll,
// Make sure the dns fields are never nil.
// New containers don't ever have those fields nil,
// but pre created containers can still have those nil values.
// See https://github.com/docker/docker/pull/17779
// for a more detailed explanation on why we don't want that.
DNS: flDNS.GetAllOrEmpty(),
DNSSearch: flDNSSearch.GetAllOrEmpty(),
DNSOptions: flDNSOptions.GetAllOrEmpty(),
ExtraHosts: flExtraHosts.GetAll(),
VolumesFrom: flVolumesFrom.GetAll(),
NetworkMode: container.NetworkMode(*flNetMode),
IpcMode: ipcMode,
PidMode: pidMode,
UTSMode: utsMode,
UsernsMode: usernsMode,
CapAdd: strslice.StrSlice(flCapAdd.GetAll()),
CapDrop: strslice.StrSlice(flCapDrop.GetAll()),
GroupAdd: flGroupAdd.GetAll(),
RestartPolicy: restartPolicy,
SecurityOpt: securityOpts,
StorageOpt: storageOpts,
ReadonlyRootfs: *flReadonlyRootfs,
LogConfig: container.LogConfig{Type: *flLoggingDriver, Config: loggingOpts},
VolumeDriver: *flVolumeDriver,
Isolation: container.Isolation(*flIsolation),
ShmSize: shmSize,
Resources: resources,
Tmpfs: tmpfs,
}
// When allocating stdin in attached mode, close stdin at client disconnect
if config.OpenStdin && config.AttachStdin {
config.StdinOnce = true
}
networkingConfig := &networktypes.NetworkingConfig{
EndpointsConfig: make(map[string]*networktypes.EndpointSettings),
}
if *flIPv4Address != "" || *flIPv6Address != "" {
networkingConfig.EndpointsConfig[string(hostConfig.NetworkMode)] = &networktypes.EndpointSettings{
IPAMConfig: &networktypes.EndpointIPAMConfig{
IPv4Address: *flIPv4Address,
IPv6Address: *flIPv6Address,
},
}
}
if hostConfig.NetworkMode.IsUserDefined() && len(hostConfig.Links) > 0 {
epConfig := networkingConfig.EndpointsConfig[string(hostConfig.NetworkMode)]
if epConfig == nil {
epConfig = &networktypes.EndpointSettings{}
}
epConfig.Links = make([]string, len(hostConfig.Links))
copy(epConfig.Links, hostConfig.Links)
networkingConfig.EndpointsConfig[string(hostConfig.NetworkMode)] = epConfig
}
if flAliases.Len() > 0 {
epConfig := networkingConfig.EndpointsConfig[string(hostConfig.NetworkMode)]
if epConfig == nil {
epConfig = &networktypes.EndpointSettings{}
}
epConfig.Aliases = make([]string, flAliases.Len())
copy(epConfig.Aliases, flAliases.GetAll())
networkingConfig.EndpointsConfig[string(hostConfig.NetworkMode)] = epConfig
}
return config, hostConfig, networkingConfig, cmd, nil
}
// InstallCommonFlags adds command-line options to the top-level flag parser for
// the current process.
// Subsequent calls to `flag.Parse` will populate config with values parsed
// from the command-line.
func (config *Config) InstallCommonFlags(cmd *flag.FlagSet, usageFn func(string) string) {
config.ServiceOptions.InstallCliFlags(cmd, usageFn)
cmd.Var(opts.NewNamedListOptsRef("storage-opts", &config.GraphOptions, nil), []string{"-storage-opt"}, usageFn("Set storage driver options"))
cmd.Var(opts.NewNamedListOptsRef("authorization-plugins", &config.AuthorizationPlugins, nil), []string{"-authorization-plugin"}, usageFn("List authorization plugins in order from first evaluator to last"))
cmd.Var(opts.NewNamedListOptsRef("exec-opts", &config.ExecOptions, nil), []string{"-exec-opt"}, usageFn("Set runtime execution options"))
cmd.StringVar(&config.Pidfile, []string{"p", "-pidfile"}, defaultPidFile, usageFn("Path to use for daemon PID file"))
cmd.StringVar(&config.Root, []string{"g", "-graph"}, defaultGraph, usageFn("Root of the Docker runtime"))
cmd.BoolVar(&config.AutoRestart, []string{"#r", "#-restart"}, true, usageFn("--restart on the daemon has been deprecated in favor of --restart policies on docker run"))
cmd.StringVar(&config.GraphDriver, []string{"s", "-storage-driver"}, "", usageFn("Storage driver to use"))
cmd.IntVar(&config.Mtu, []string{"#mtu", "-mtu"}, 0, usageFn("Set the containers network MTU"))
cmd.BoolVar(&config.RawLogs, []string{"-raw-logs"}, false, usageFn("Full timestamps without ANSI coloring"))
// FIXME: why the inconsistency between "hosts" and "sockets"?
cmd.Var(opts.NewListOptsRef(&config.DNS, opts.ValidateIPAddress), []string{"#dns", "-dns"}, usageFn("DNS server to use"))
cmd.Var(opts.NewNamedListOptsRef("dns-opts", &config.DNSOptions, nil), []string{"-dns-opt"}, usageFn("DNS options to use"))
cmd.Var(opts.NewListOptsRef(&config.DNSSearch, opts.ValidateDNSSearch), []string{"-dns-search"}, usageFn("DNS search domains to use"))
cmd.Var(opts.NewNamedListOptsRef("labels", &config.Labels, opts.ValidateLabel), []string{"-label"}, usageFn("Set key=value labels to the daemon"))
cmd.StringVar(&config.LogConfig.Type, []string{"-log-driver"}, "json-file", usageFn("Default driver for container logs"))
cmd.Var(opts.NewNamedMapOpts("log-opts", config.LogConfig.Config, nil), []string{"-log-opt"}, usageFn("Set log driver options"))
cmd.StringVar(&config.ClusterAdvertise, []string{"-cluster-advertise"}, "", usageFn("Address or interface name to advertise"))
cmd.StringVar(&config.ClusterStore, []string{"-cluster-store"}, "", usageFn("Set the cluster store"))
cmd.Var(opts.NewNamedMapOpts("cluster-store-opts", config.ClusterOpts, nil), []string{"-cluster-store-opt"}, usageFn("Set cluster store options"))
}
// InstallCommonFlags adds command-line options to the top-level flag parser for
// the current process.
// Subsequent calls to `flag.Parse` will populate config with values parsed
// from the command-line.
func (config *Config) InstallCommonFlags(cmd *flag.FlagSet, usageFn func(string) string) {
var maxConcurrentDownloads, maxConcurrentUploads int
config.ServiceOptions.InstallCliFlags(cmd, usageFn)
cmd.Var(opts.NewNamedListOptsRef("storage-opts", &config.GraphOptions, nil), []string{"-storage-opt"}, usageFn("Storage driver options"))
cmd.Var(opts.NewNamedListOptsRef("authorization-plugins", &config.AuthorizationPlugins, nil), []string{"-authorization-plugin"}, usageFn("Authorization plugins to load"))
cmd.Var(opts.NewNamedListOptsRef("exec-opts", &config.ExecOptions, nil), []string{"-exec-opt"}, usageFn("Runtime execution options"))
cmd.StringVar(&config.Pidfile, []string{"p", "-pidfile"}, defaultPidFile, usageFn("Path to use for daemon PID file"))
cmd.StringVar(&config.Root, []string{"g", "-graph"}, defaultGraph, usageFn("Root of the Docker runtime"))
cmd.BoolVar(&config.AutoRestart, []string{"#r", "#-restart"}, true, usageFn("--restart on the daemon has been deprecated in favor of --restart policies on docker run"))
cmd.StringVar(&config.GraphDriver, []string{"s", "-storage-driver"}, "", usageFn("Storage driver to use"))
cmd.IntVar(&config.Mtu, []string{"#mtu", "-mtu"}, 0, usageFn("Set the containers network MTU"))
cmd.BoolVar(&config.RawLogs, []string{"-raw-logs"}, false, usageFn("Full timestamps without ANSI coloring"))
// FIXME: why the inconsistency between "hosts" and "sockets"?
cmd.Var(opts.NewListOptsRef(&config.DNS, opts.ValidateIPAddress), []string{"#dns", "-dns"}, usageFn("DNS server to use"))
cmd.Var(opts.NewNamedListOptsRef("dns-opts", &config.DNSOptions, nil), []string{"-dns-opt"}, usageFn("DNS options to use"))
cmd.Var(opts.NewListOptsRef(&config.DNSSearch, opts.ValidateDNSSearch), []string{"-dns-search"}, usageFn("DNS search domains to use"))
cmd.Var(opts.NewNamedListOptsRef("labels", &config.Labels, opts.ValidateLabel), []string{"-label"}, usageFn("Set key=value labels to the daemon"))
cmd.StringVar(&config.LogConfig.Type, []string{"-log-driver"}, "json-file", usageFn("Default driver for container logs"))
cmd.Var(opts.NewNamedMapOpts("log-opts", config.LogConfig.Config, nil), []string{"-log-opt"}, usageFn("Default log driver options for containers"))
cmd.StringVar(&config.ClusterAdvertise, []string{"-cluster-advertise"}, "", usageFn("Address or interface name to advertise"))
cmd.StringVar(&config.ClusterStore, []string{"-cluster-store"}, "", usageFn("URL of the distributed storage backend"))
cmd.Var(opts.NewNamedMapOpts("cluster-store-opts", config.ClusterOpts, nil), []string{"-cluster-store-opt"}, usageFn("Set cluster store options"))
cmd.StringVar(&config.CorsHeaders, []string{"-api-cors-header"}, "", usageFn("Set CORS headers in the remote API"))
cmd.IntVar(&maxConcurrentDownloads, []string{"-max-concurrent-downloads"}, defaultMaxConcurrentDownloads, usageFn("Set the max concurrent downloads for each pull"))
cmd.IntVar(&maxConcurrentUploads, []string{"-max-concurrent-uploads"}, defaultMaxConcurrentUploads, usageFn("Set the max concurrent uploads for each push"))
cmd.StringVar(&config.SwarmDefaultAdvertiseAddr, []string{"-swarm-default-advertise-addr"}, "", usageFn("Set default address or interface for swarm advertised address"))
config.MaxConcurrentDownloads = &maxConcurrentDownloads
config.MaxConcurrentUploads = &maxConcurrentUploads
}
// Parse parses the specified args for the specified command and generates a Config,
// a HostConfig and returns them with the specified command.
// If the specified args are not valid, it will return an error.
func Parse(cmd *flag.FlagSet, args []string) (*Config, *HostConfig, *flag.FlagSet, error) {
var (
// FIXME: use utils.ListOpts for attach and volumes?
flAttach = opts.NewListOpts(opts.ValidateAttach)
flVolumes = opts.NewListOpts(opts.ValidatePath)
flLinks = opts.NewListOpts(opts.ValidateLink)
flEnv = opts.NewListOpts(opts.ValidateEnv)
flLabels = opts.NewListOpts(opts.ValidateEnv)
flDevices = opts.NewListOpts(opts.ValidateDevice)
flUlimits = opts.NewUlimitOpt(nil)
flPublish = opts.NewListOpts(nil)
flExpose = opts.NewListOpts(nil)
flDNS = opts.NewListOpts(opts.ValidateIPAddress)
flDNSSearch = opts.NewListOpts(opts.ValidateDNSSearch)
flExtraHosts = opts.NewListOpts(opts.ValidateExtraHost)
flVolumesFrom = opts.NewListOpts(nil)
flLxcOpts = opts.NewListOpts(nil)
flEnvFile = opts.NewListOpts(nil)
flCapAdd = opts.NewListOpts(nil)
flCapDrop = opts.NewListOpts(nil)
flGroupAdd = opts.NewListOpts(nil)
flSecurityOpt = opts.NewListOpts(nil)
flLabelsFile = opts.NewListOpts(nil)
flLoggingOpts = opts.NewListOpts(nil)
flNetwork = cmd.Bool([]string{"#n", "#-networking"}, true, "Enable networking for this container")
flPrivileged = cmd.Bool([]string{"#privileged", "-privileged"}, false, "Give extended privileges to this container")
flPidMode = cmd.String([]string{"-pid"}, "", "PID namespace to use")
flUTSMode = cmd.String([]string{"-uts"}, "", "UTS namespace to use")
flPublishAll = cmd.Bool([]string{"P", "-publish-all"}, false, "Publish all exposed ports to random ports")
flStdin = cmd.Bool([]string{"i", "-interactive"}, false, "Keep STDIN open even if not attached")
flTty = cmd.Bool([]string{"t", "-tty"}, false, "Allocate a pseudo-TTY")
flOomKillDisable = cmd.Bool([]string{"-oom-kill-disable"}, false, "Disable OOM Killer")
flContainerIDFile = cmd.String([]string{"#cidfile", "-cidfile"}, "", "Write the container ID to the file")
flEntrypoint = cmd.String([]string{"#entrypoint", "-entrypoint"}, "", "Overwrite the default ENTRYPOINT of the image")
flHostname = cmd.String([]string{"h", "-hostname"}, "", "Container host name")
flMemoryString = cmd.String([]string{"m", "-memory"}, "", "Memory limit")
flMemorySwap = cmd.String([]string{"-memory-swap"}, "", "Total memory (memory + swap), '-1' to disable swap")
flKernelMemory = cmd.String([]string{"-kernel-memory"}, "", "Kernel memory limit")
flUser = cmd.String([]string{"u", "-user"}, "", "Username or UID (format: <name|uid>[:<group|gid>])")
flWorkingDir = cmd.String([]string{"w", "-workdir"}, "", "Working directory inside the container")
flCPUShares = cmd.Int64([]string{"c", "-cpu-shares"}, 0, "CPU shares (relative weight)")
flCPUPeriod = cmd.Int64([]string{"-cpu-period"}, 0, "Limit CPU CFS (Completely Fair Scheduler) period")
flCPUQuota = cmd.Int64([]string{"-cpu-quota"}, 0, "Limit CPU CFS (Completely Fair Scheduler) quota")
flCpusetCpus = cmd.String([]string{"#-cpuset", "-cpuset-cpus"}, "", "CPUs in which to allow execution (0-3, 0,1)")
flCpusetMems = cmd.String([]string{"-cpuset-mems"}, "", "MEMs in which to allow execution (0-3, 0,1)")
flBlkioWeight = cmd.Int64([]string{"-blkio-weight"}, 0, "Block IO (relative weight), between 10 and 1000")
flSwappiness = cmd.Int64([]string{"-memory-swappiness"}, -1, "Tuning container memory swappiness (0 to 100)")
flNetMode = cmd.String([]string{"-net"}, "default", "Set the Network mode for the container")
flMacAddress = cmd.String([]string{"-mac-address"}, "", "Container MAC address (e.g. 92:d0:c6:0a:29:33)")
flIpcMode = cmd.String([]string{"-ipc"}, "", "IPC namespace to use")
flRestartPolicy = cmd.String([]string{"-restart"}, "no", "Restart policy to apply when a container exits")
flReadonlyRootfs = cmd.Bool([]string{"-read-only"}, false, "Mount the container's root filesystem as read only")
flLoggingDriver = cmd.String([]string{"-log-driver"}, "", "Logging driver for container")
flCgroupParent = cmd.String([]string{"-cgroup-parent"}, "", "Optional parent cgroup for the container")
flVolumeDriver = cmd.String([]string{"-volume-driver"}, "", "Optional volume driver for the container")
)
cmd.Var(&flAttach, []string{"a", "-attach"}, "Attach to STDIN, STDOUT or STDERR")
cmd.Var(&flVolumes, []string{"v", "-volume"}, "Bind mount a volume")
cmd.Var(&flLinks, []string{"#link", "-link"}, "Add link to another container")
cmd.Var(&flDevices, []string{"-device"}, "Add a host device to the container")
cmd.Var(&flLabels, []string{"l", "-label"}, "Set meta data on a container")
cmd.Var(&flLabelsFile, []string{"-label-file"}, "Read in a line delimited file of labels")
cmd.Var(&flEnv, []string{"e", "-env"}, "Set environment variables")
cmd.Var(&flEnvFile, []string{"-env-file"}, "Read in a file of environment variables")
cmd.Var(&flPublish, []string{"p", "-publish"}, "Publish a container's port(s) to the host")
cmd.Var(&flExpose, []string{"#expose", "-expose"}, "Expose a port or a range of ports")
cmd.Var(&flDNS, []string{"#dns", "-dns"}, "Set custom DNS servers")
cmd.Var(&flDNSSearch, []string{"-dns-search"}, "Set custom DNS search domains")
cmd.Var(&flExtraHosts, []string{"-add-host"}, "Add a custom host-to-IP mapping (host:ip)")
cmd.Var(&flVolumesFrom, []string{"#volumes-from", "-volumes-from"}, "Mount volumes from the specified container(s)")
cmd.Var(&flLxcOpts, []string{"#lxc-conf", "-lxc-conf"}, "Add custom lxc options")
cmd.Var(&flCapAdd, []string{"-cap-add"}, "Add Linux capabilities")
cmd.Var(&flCapDrop, []string{"-cap-drop"}, "Drop Linux capabilities")
cmd.Var(&flGroupAdd, []string{"-group-add"}, "Add additional groups to join")
cmd.Var(&flSecurityOpt, []string{"-security-opt"}, "Security Options")
cmd.Var(flUlimits, []string{"-ulimit"}, "Ulimit options")
cmd.Var(&flLoggingOpts, []string{"-log-opt"}, "Log driver options")
expFlags := attachExperimentalFlags(cmd)
cmd.Require(flag.Min, 1)
i