Esempio n. 1
0
func (d *dsImpl) Count(fq *ds.FinalizedQuery) (ret int64, err error) {
	idx, head := d.data.getQuerySnaps(!fq.EventuallyConsistent())
	ret, err = countQuery(fq, d.data.aid, d.ns, false, idx, head)
	if d.data.maybeAutoIndex(err) {
		idx, head := d.data.getQuerySnaps(!fq.EventuallyConsistent())
		ret, err = countQuery(fq, d.data.aid, d.ns, false, idx, head)
	}
	return
}
Esempio n. 2
0
func pickQueryStrategy(fq *ds.FinalizedQuery, rq *reducedQuery, cb ds.RawRunCB, head *memStore) queryStrategy {
	if fq.KeysOnly() {
		return &keysOnlyStrategy{cb, stringset.New(0)}
	}
	if len(fq.Project()) > 0 {
		return newProjectionStrategy(fq, rq, cb)
	}
	return newNormalStrategy(rq.aid, rq.ns, cb, head)
}
Esempio n. 3
0
func (d *dsImpl) Run(fq *ds.FinalizedQuery, cb ds.RawRunCB) error {
	idx, head := d.data.getQuerySnaps(!fq.EventuallyConsistent())
	err := executeQuery(fq, d.data.aid, d.ns, false, idx, head, cb)
	if d.data.maybeAutoIndex(err) {
		idx, head = d.data.getQuerySnaps(!fq.EventuallyConsistent())
		err = executeQuery(fq, d.data.aid, d.ns, false, idx, head, cb)
	}
	return err
}
Esempio n. 4
0
func (d *dsTxnBuf) Run(fq *ds.FinalizedQuery, cb ds.RawRunCB) error {
	if start, end := fq.Bounds(); start != nil || end != nil {
		return errors.New("txnBuf filter does not support query cursors")
	}

	limit, limitSet := fq.Limit()
	offset, _ := fq.Offset()
	keysOnly := fq.KeysOnly()

	project := fq.Project()

	bufDS, parentDS, sizes := func() (ds.RawInterface, ds.RawInterface, *sizeTracker) {
		if !d.haveLock {
			d.state.Lock()
			defer d.state.Unlock()
		}
		return d.state.bufDS, d.state.parentDS, d.state.entState.dup()
	}()

	return runMergedQueries(fq, sizes, bufDS, parentDS, func(key *ds.Key, data ds.PropertyMap) error {
		if offset > 0 {
			offset--
			return nil
		}
		if limitSet {
			if limit == 0 {
				return ds.Stop
			}
			limit--
		}
		if keysOnly {
			data = nil
		} else if len(project) > 0 {
			newData := make(ds.PropertyMap, len(project))
			for _, p := range project {
				newData[p] = data[p]
			}
			data = newData
		}
		return cb(key, data, nil)
	})
}
Esempio n. 5
0
func numComponents(fq *ds.FinalizedQuery) int {
	numComponents := len(fq.Orders())
	if p, _, _ := fq.IneqFilterLow(); p != "" {
		numComponents++
	}
	if p, _, _ := fq.IneqFilterHigh(); p != "" {
		numComponents++
	}
	for _, v := range fq.EqFilters() {
		numComponents += v.Len()
	}
	return numComponents
}
Esempio n. 6
0
func newProjectionStrategy(fq *ds.FinalizedQuery, rq *reducedQuery, cb ds.RawRunCB) queryStrategy {
	proj := fq.Project()

	projectionLookups := make([]projectionLookup, len(proj))
	for i, prop := range proj {
		projectionLookups[i].propertyName = prop
		lookupErr := fmt.Errorf("planning a strategy for an unfulfillable query?")
		for j, col := range rq.suffixFormat {
			if col.Property == prop {
				projectionLookups[i].suffixIndex = j
				lookupErr = nil
				break
			}
		}
		impossible(lookupErr)
	}
	ret := &projectionStrategy{cb: cb, project: projectionLookups}
	if fq.Distinct() {
		ret.distinct = stringset.New(0)
	}
	return ret
}
Esempio n. 7
0
// adjustQuery applies various mutations to the query to make it suitable for
// merging. In general, this removes limits and offsets the 'distinct' modifier,
// and it ensures that if there are sort orders which won't appear in the
// result data that the query is transformed into a projection query which
// contains all of the data. A non-projection query will never be transformed
// in this way.
func adjustQuery(fq *ds.FinalizedQuery) (*ds.FinalizedQuery, error) {
	q := fq.Original()

	// The limit and offset must be done in-memory because otherwise we may
	// request too few entities from the underlying store if many matching
	// entities have been deleted in the buffered transaction.
	q = q.Limit(-1)
	q = q.Offset(-1)

	// distinction must be done in-memory, because otherwise there's no way
	// to merge in the effect of the in-flight changes (because there's no way
	// to push back to the datastore "yeah, I know you told me that the (1, 2)
	// result came from `/Bob,1`, but would you mind pretending that it didn't
	// and tell me next the one instead?
	q = q.Distinct(false)

	// since we need to merge results, we must have all order-related fields
	// in each result. The only time we wouldn't have all the data available would
	// be for a keys-only or projection query. To fix this, we convert all
	// Projection and KeysOnly queries to project on /all/ Orders.
	//
	// FinalizedQuery already guarantees that all projected fields show up in
	// the Orders, but the projected fields could be a subset of the orders.
	//
	// Additionally on a keys-only query, any orders other than __key__ require
	// conversion of this query to a projection query including those orders in
	// order to merge the results correctly.
	//
	// In both cases, the resulting objects returned to the higher layers of the
	// stack will only include the information requested by the user; keys-only
	// queries will discard all PropertyMap data, and projection queries will
	// discard any field data that the user didn't ask for.
	orders := fq.Orders()
	if len(fq.Project()) > 0 || (fq.KeysOnly() && len(orders) > 1) {
		q = q.KeysOnly(false)

		for _, o := range orders {
			if o.Property == "__key__" {
				continue
			}
			q = q.Project(o.Property)
		}
	}

	return q.Finalize()
}
Esempio n. 8
0
// GetBinaryBounds gets the binary encoding of the upper and lower bounds of
// the inequality filter on fq, if any is defined. If a bound does not exist,
// it is nil.
//
// NOTE: if fq specifies a descending sort order for the inequality, the bounds
// will be inverted, incremented, and flipped.
func GetBinaryBounds(fq *ds.FinalizedQuery) (lower, upper []byte) {
	// Pick up the start/end range from the inequalities, if any.
	//
	// start and end in the reducedQuery are normalized so that `start >=
	// X < end`. Because of that, we need to tweak the inequality filters
	// contained in the query if they use the > or <= operators.
	if ineqProp := fq.IneqFilterProp(); ineqProp != "" {
		_, startOp, startV := fq.IneqFilterLow()
		if startOp != "" {
			lower = serialize.ToBytes(startV)
			if startOp == ">" {
				lower = increment(lower)
			}
		}

		_, endOp, endV := fq.IneqFilterHigh()
		if endOp != "" {
			upper = serialize.ToBytes(endV)
			if endOp == "<=" {
				upper = increment(upper)
			}
		}

		// The inequality is specified in natural (ascending) order in the query's
		// Filter syntax, but the order information may indicate to use a descending
		// index column for it. If that's the case, then we must invert, swap and
		// increment the inequality endpoints.
		//
		// Invert so that the desired numbers are represented correctly in the index.
		// Swap so that our iterators still go from >= start to < end.
		// Increment so that >= and < get correctly bounded (since the iterator is
		// still using natrual bytes ordering)
		if fq.Orders()[0].Descending {
			hi, lo := []byte(nil), []byte(nil)
			if len(lower) > 0 {
				lo = increment(serialize.Invert(lower))
			}
			if len(upper) > 0 {
				hi = increment(serialize.Invert(upper))
			}
			upper, lower = lo, hi
		}
	}
	return
}
Esempio n. 9
0
func countQuery(fq *ds.FinalizedQuery, aid, ns string, isTxn bool, idx, head *memStore) (ret int64, err error) {
	if len(fq.Project()) == 0 && !fq.KeysOnly() {
		fq, err = fq.Original().KeysOnly(true).Finalize()
		if err != nil {
			return
		}
	}
	err = executeQuery(fq, aid, ns, isTxn, idx, head, func(_ *ds.Key, _ ds.PropertyMap, _ ds.CursorCB) error {
		ret++
		return nil
	})
	return
}
Esempio n. 10
0
func (d *dsTxnBuf) Count(fq *ds.FinalizedQuery) (count int64, err error) {
	// Unfortunately there's no fast-path here. We literally have to run the
	// query and count. Fortunately we can optimize to count keys if it's not
	// a projection query. This will save on bandwidth a bit.
	if len(fq.Project()) == 0 && !fq.KeysOnly() {
		fq, err = fq.Original().KeysOnly(true).Finalize()
		if err != nil {
			return
		}
	}
	err = d.Run(fq, func(_ *ds.Key, _ ds.PropertyMap, _ ds.CursorCB) error {
		count++
		return nil
	})
	return
}
Esempio n. 11
0
func (d rdsImpl) fixQuery(fq *ds.FinalizedQuery) (*datastore.Query, error) {
	ret := datastore.NewQuery(fq.Kind())

	start, end := fq.Bounds()
	if start != nil {
		ret = ret.Start(start.(datastore.Cursor))
	}
	if end != nil {
		ret = ret.End(end.(datastore.Cursor))
	}

	for prop, vals := range fq.EqFilters() {
		if prop == "__ancestor__" {
			p, err := dsF2RProp(d.aeCtx, vals[0])
			if err != nil {
				return nil, err
			}
			ret = ret.Ancestor(p.Value.(*datastore.Key))
		} else {
			filt := prop + "="
			for _, v := range vals {
				p, err := dsF2RProp(d.aeCtx, v)
				if err != nil {
					return nil, err
				}

				ret = ret.Filter(filt, p.Value)
			}
		}
	}

	if lnam, lop, lprop := fq.IneqFilterLow(); lnam != "" {
		p, err := dsF2RProp(d.aeCtx, lprop)
		if err != nil {
			return nil, err
		}
		ret = ret.Filter(lnam+" "+lop, p.Value)
	}

	if hnam, hop, hprop := fq.IneqFilterHigh(); hnam != "" {
		p, err := dsF2RProp(d.aeCtx, hprop)
		if err != nil {
			return nil, err
		}
		ret = ret.Filter(hnam+" "+hop, p.Value)
	}

	if fq.EventuallyConsistent() {
		ret = ret.EventualConsistency()
	}

	if fq.KeysOnly() {
		ret = ret.KeysOnly()
	}

	if lim, ok := fq.Limit(); ok {
		ret = ret.Limit(int(lim))
	}

	if off, ok := fq.Offset(); ok {
		ret = ret.Offset(int(off))
	}

	for _, o := range fq.Orders() {
		ret = ret.Order(o.String())
	}

	ret = ret.Project(fq.Project()...)
	if fq.Distinct() {
		ret = ret.Distinct()
	}

	return ret, nil
}
Esempio n. 12
0
func executeQuery(fq *ds.FinalizedQuery, aid, ns string, isTxn bool, idx, head *memStore, cb ds.RawRunCB) error {
	rq, err := reduce(fq, aid, ns, isTxn)
	if err == ds.ErrNullQuery {
		return nil
	}
	if err != nil {
		return err
	}

	idxs, err := getIndexes(rq, idx)
	if err == ds.ErrNullQuery {
		return nil
	}
	if err != nil {
		return err
	}

	strategy := pickQueryStrategy(fq, rq, cb, head)
	if strategy == nil {
		// e.g. the normalStrategy found that there were NO entities in the current
		// namespace.
		return nil
	}

	offset, _ := fq.Offset()
	limit, hasLimit := fq.Limit()

	cursorPrefix := []byte(nil)
	getCursorFn := func(suffix []byte) func() (ds.Cursor, error) {
		return func() (ds.Cursor, error) {
			if cursorPrefix == nil {
				buf := &bytes.Buffer{}
				_, err := cmpbin.WriteUint(buf, uint64(len(rq.suffixFormat)))
				memoryCorruption(err)

				for _, col := range rq.suffixFormat {
					err := serialize.WriteIndexColumn(buf, col)
					memoryCorruption(err)
				}
				cursorPrefix = buf.Bytes()
			}
			// TODO(riannucci): Do we need to decrement suffix instead of increment
			// if we're sorting by __key__ DESCENDING?
			return queryCursor(serialize.Join(cursorPrefix, increment(suffix))), nil
		}
	}

	return multiIterate(idxs, func(suffix []byte) error {
		if offset > 0 {
			offset--
			return nil
		}
		if hasLimit {
			if limit <= 0 {
				return ds.Stop
			}
			limit--
		}

		rawData, decodedProps := parseSuffix(aid, ns, rq.suffixFormat, suffix, -1)

		keyProp := decodedProps[len(decodedProps)-1]
		if keyProp.Type() != ds.PTKey {
			impossible(fmt.Errorf("decoded index row doesn't end with a Key: %#v", keyProp))
		}

		return strategy.handle(
			rawData, decodedProps, keyProp.Value().(*ds.Key),
			getCursorFn(suffix))
	})
}
Esempio n. 13
0
func reduce(fq *ds.FinalizedQuery, aid, ns string, isTxn bool) (*reducedQuery, error) {
	if err := fq.Valid(aid, ns); err != nil {
		return nil, err
	}
	if isTxn && fq.Ancestor() == nil {
		return nil, fmt.Errorf("queries within a transaction must include an Ancestor filter")
	}
	if num := numComponents(fq); num > MaxQueryComponents {
		return nil, fmt.Errorf(
			"gae/memory: query is too large. may not have more than "+
				"%d filters + sort orders + ancestor total: had %d",
			MaxQueryComponents, num)
	}

	ret := &reducedQuery{
		aid:          aid,
		ns:           ns,
		kind:         fq.Kind(),
		suffixFormat: fq.Orders(),
	}

	eqFilts := fq.EqFilters()
	ret.eqFilters = make(map[string]stringset.Set, len(eqFilts))
	for prop, vals := range eqFilts {
		sVals := stringset.New(len(vals))
		for _, v := range vals {
			sVals.Add(string(serialize.ToBytes(v)))
		}
		ret.eqFilters[prop] = sVals
	}

	startD, endD := GetBinaryBounds(fq)

	// Now we check the start and end cursors.
	//
	// Cursors are composed of a list of IndexColumns at the beginning, followed
	// by the raw bytes to use for the suffix. The cursor is only valid if all of
	// its IndexColumns match our proposed suffixFormat, as calculated above.
	//
	// Cursors are mutually exclusive with the start/end we picked up from the
	// inequality. In a well formed query, they indicate a subset of results
	// bounded by the inequality. Technically if the start cursor is not >= the
	// low bound, or the end cursor is < the high bound, it's an error, but for
	// simplicity we just cap to the narrowest intersection of the inequality and
	// cursors.
	ret.start = startD
	ret.end = endD
	if start, end := fq.Bounds(); start != nil || end != nil {
		if start != nil {
			if c, ok := start.(queryCursor); ok {
				startCols, startD, err := c.decode()
				if err != nil {
					return nil, err
				}

				if !sortOrdersEqual(startCols, ret.suffixFormat) {
					return nil, errors.New("gae/memory: start cursor is invalid for this query")
				}
				if ret.start == nil || bytes.Compare(ret.start, startD) < 0 {
					ret.start = startD
				}
			} else {
				return nil, errors.New("gae/memory: bad cursor type")
			}
		}

		if end != nil {
			if c, ok := end.(queryCursor); ok {
				endCols, endD, err := c.decode()
				if err != nil {
					return nil, err
				}

				if !sortOrdersEqual(endCols, ret.suffixFormat) {
					return nil, errors.New("gae/memory: end cursor is invalid for this query")
				}
				if ret.end == nil || bytes.Compare(endD, ret.end) < 0 {
					ret.end = endD
				}
			} else {
				return nil, errors.New("gae/memory: bad cursor type")
			}
		}
	}

	// Finally, verify that we could even /potentially/ do work. If we have
	// overlapping range ends, then we don't have anything to do.
	if ret.end != nil && bytes.Compare(ret.start, ret.end) >= 0 {
		return nil, ds.ErrNullQuery
	}

	ret.numCols = len(ret.suffixFormat)
	for prop, vals := range ret.eqFilters {
		if len(ret.suffixFormat) == 1 && prop == "__ancestor__" {
			continue
		}
		ret.numCols += vals.Len()
	}

	return ret, nil
}
Esempio n. 14
0
// runMergedQueries executes a user query `fq` against the parent datastore as
// well as the in-memory datastore, calling `cb` with the merged result set.
//
// It's expected that the caller of this function will apply limit and offset
// if the query contains those restrictions. This may convert the query to
// an expanded projection query with more data than the user asked for. It's the
// caller's responsibility to prune away the extra data.
//
// See also `dsTxnBuf.Run()`.
func runMergedQueries(fq *ds.FinalizedQuery, sizes *sizeTracker,
	memDS, parentDS ds.RawInterface, cb func(k *ds.Key, data ds.PropertyMap) error) error {

	toRun, err := adjustQuery(fq)
	if err != nil {
		return err
	}

	cmpLower, cmpUpper := memory.GetBinaryBounds(fq)
	cmpOrder := fq.Orders()
	cmpFn := func(i *item) string {
		return i.getCmpRow(cmpLower, cmpUpper, cmpOrder)
	}

	dedup := stringset.Set(nil)
	distinct := stringset.Set(nil)
	distinctOrder := []ds.IndexColumn(nil)
	if len(fq.Project()) > 0 { // the original query was a projection query
		if fq.Distinct() {
			// it was a distinct projection query, so we need to dedup by distinct
			// options.
			distinct = stringset.New(0)
			proj := fq.Project()
			distinctOrder = make([]ds.IndexColumn, len(proj))
			for i, p := range proj {
				distinctOrder[i].Property = p
			}
		}
	} else {
		// the original was a normal or keys-only query, so we need to dedup by keys.
		dedup = stringset.New(0)
	}

	stopChan := make(chan struct{})

	parIter := queryToIter(stopChan, toRun, parentDS)
	memIter := queryToIter(stopChan, toRun, memDS)

	parItemGet := func() (*item, error) {
		for {
			itm, err := parIter()
			if itm == nil || err != nil {
				return nil, err
			}
			encKey := itm.getEncKey()
			if sizes.has(encKey) || (dedup != nil && dedup.Has(encKey)) {
				continue
			}
			return itm, nil
		}
	}
	memItemGet := func() (*item, error) {
		for {
			itm, err := memIter()
			if itm == nil || err != nil {
				return nil, err
			}
			if dedup != nil && dedup.Has(itm.getEncKey()) {
				continue
			}
			return itm, nil
		}
	}

	defer func() {
		close(stopChan)
		parItemGet()
		memItemGet()
	}()

	pitm, err := parItemGet()
	if err != nil {
		return err
	}

	mitm, err := memItemGet()
	if err != nil {
		return err
	}

	for {
		// the err can be set during the loop below. If we come around the bend and
		// it's set, then we need to return it. We don't check it immediately
		// because it's set after we already have a good result to return to the
		// user.
		if err != nil {
			return err
		}

		usePitm := pitm != nil
		if pitm != nil && mitm != nil {
			usePitm = cmpFn(pitm) < cmpFn(mitm)
		} else if pitm == nil && mitm == nil {
			break
		}

		toUse := (*item)(nil)
		// we check the error at the beginning of the loop.
		if usePitm {
			toUse = pitm
			pitm, err = parItemGet()
		} else {
			toUse = mitm
			mitm, err = memItemGet()
		}

		if dedup != nil {
			if !dedup.Add(toUse.getEncKey()) {
				continue
			}
		}
		if distinct != nil {
			// NOTE: We know that toUse will not be used after this point for
			// comparison purposes, so re-use its cmpRow property for our distinct
			// filter here.
			toUse.cmpRow = ""
			if !distinct.Add(toUse.getCmpRow(nil, nil, distinctOrder)) {
				continue
			}
		}
		if err := cb(toUse.key, toUse.data); err != nil {
			if err == ds.Stop {
				return nil
			}
			return err
		}
	}

	return nil
}