Esempio n. 1
0
// handleUDPChannel implements UDP port forwarding. A single UDP
// SSH channel follows the udpgw protocol, which multiplexes many
// UDP port forwards.
//
// The udpgw protocol and original server implementation:
// Copyright (c) 2009, Ambroz Bizjak <*****@*****.**>
// https://github.com/ambrop72/badvpn
//
func (sshClient *sshClient) handleUDPChannel(newChannel ssh.NewChannel) {

	// Accept this channel immediately. This channel will replace any
	// previously existing UDP channel for this client.

	sshChannel, requests, err := newChannel.Accept()
	if err != nil {
		log.WithContextFields(LogFields{"error": err}).Warning("accept new channel failed")
		return
	}
	go ssh.DiscardRequests(requests)
	defer sshChannel.Close()

	sshClient.setUDPChannel(sshChannel)

	multiplexer := &udpPortForwardMultiplexer{
		sshClient:      sshClient,
		sshChannel:     sshChannel,
		portForwards:   make(map[uint16]*udpPortForward),
		portForwardLRU: common.NewLRUConns(),
		relayWaitGroup: new(sync.WaitGroup),
	}
	multiplexer.run()
}
Esempio n. 2
0
func (sshClient *sshClient) handleTCPChannel(
	hostToConnect string,
	portToConnect int,
	newChannel ssh.NewChannel) {

	isWebServerPortForward := false
	config := sshClient.sshServer.support.Config
	if config.WebServerPortForwardAddress != "" {
		destination := net.JoinHostPort(hostToConnect, strconv.Itoa(portToConnect))
		if destination == config.WebServerPortForwardAddress {
			isWebServerPortForward = true
			if config.WebServerPortForwardRedirectAddress != "" {
				// Note: redirect format is validated when config is loaded
				host, portStr, _ := net.SplitHostPort(config.WebServerPortForwardRedirectAddress)
				port, _ := strconv.Atoi(portStr)
				hostToConnect = host
				portToConnect = port
			}
		}
	}

	if !isWebServerPortForward && !sshClient.isPortForwardPermitted(
		portForwardTypeTCP, hostToConnect, portToConnect) {

		sshClient.rejectNewChannel(
			newChannel, ssh.Prohibited, "port forward not permitted")
		return
	}

	var bytesUp, bytesDown int64
	sshClient.openedPortForward(portForwardTypeTCP)
	defer func() {
		sshClient.closedPortForward(
			portForwardTypeTCP, atomic.LoadInt64(&bytesUp), atomic.LoadInt64(&bytesDown))
	}()

	// TOCTOU note: important to increment the port forward count (via
	// openPortForward) _before_ checking isPortForwardLimitExceeded
	// otherwise, the client could potentially consume excess resources
	// by initiating many port forwards concurrently.
	// TODO: close LRU connection (after successful Dial) instead of
	// rejecting new connection?
	if maxCount, exceeded := sshClient.isPortForwardLimitExceeded(portForwardTypeTCP); exceeded {

		// Close the oldest TCP port forward. CloseOldest() closes
		// the conn and the port forward's goroutine will complete
		// the cleanup asynchronously.
		//
		// Some known limitations:
		//
		// - Since CloseOldest() closes the upstream socket but does not
		//   clean up all resources associated with the port forward. These
		//   include the goroutine(s) relaying traffic as well as the SSH
		//   channel. Closing the socket will interrupt the goroutines which
		//   will then complete the cleanup. But, since the full cleanup is
		//   asynchronous, there exists a possibility that a client can consume
		//   more than max port forward resources -- just not upstream sockets.
		//
		// - An LRU list entry for this port forward is not added until
		//   after the dial completes, but the port forward is counted
		//   towards max limits. This means many dials in progress will
		//   put established connections in jeopardy.
		//
		// - We're closing the oldest open connection _before_ successfully
		//   dialing the new port forward. This means we are potentially
		//   discarding a good connection to make way for a failed connection.
		//   We cannot simply dial first and still maintain a limit on
		//   resources used, so to address this we'd need to add some
		//   accounting for connections still establishing.

		sshClient.tcpPortForwardLRU.CloseOldest()

		log.WithContextFields(
			LogFields{
				"maxCount": maxCount,
			}).Debug("closed LRU TCP port forward")
	}

	// Dial the target remote address. This is done in a goroutine to
	// ensure the shutdown signal is handled immediately.

	remoteAddr := fmt.Sprintf("%s:%d", hostToConnect, portToConnect)

	log.WithContextFields(LogFields{"remoteAddr": remoteAddr}).Debug("dialing")

	type dialTcpResult struct {
		conn net.Conn
		err  error
	}

	resultChannel := make(chan *dialTcpResult, 1)

	go func() {
		// TODO: on EADDRNOTAVAIL, temporarily suspend new clients
		// TODO: IPv6 support
		conn, err := net.DialTimeout(
			"tcp4", remoteAddr, SSH_TCP_PORT_FORWARD_DIAL_TIMEOUT)
		resultChannel <- &dialTcpResult{conn, err}
	}()

	var result *dialTcpResult
	select {
	case result = <-resultChannel:
	case <-sshClient.stopBroadcast:
		// Note: may leave dial in progress (TODO: use DialContext to cancel)
		return
	}

	if result.err != nil {
		sshClient.rejectNewChannel(newChannel, ssh.ConnectionFailed, result.err.Error())
		return
	}

	// The upstream TCP port forward connection has been established. Schedule
	// some cleanup and notify the SSH client that the channel is accepted.

	fwdConn := result.conn
	defer fwdConn.Close()

	fwdChannel, requests, err := newChannel.Accept()
	if err != nil {
		log.WithContextFields(LogFields{"error": err}).Warning("accept new channel failed")
		return
	}
	go ssh.DiscardRequests(requests)
	defer fwdChannel.Close()

	// ActivityMonitoredConn monitors the TCP port forward I/O and updates
	// its LRU status. ActivityMonitoredConn also times out I/O on the port
	// forward if both reads and writes have been idle for the specified
	// duration.

	lruEntry := sshClient.tcpPortForwardLRU.Add(fwdConn)
	defer lruEntry.Remove()

	fwdConn, err = common.NewActivityMonitoredConn(
		fwdConn,
		sshClient.idleTCPPortForwardTimeout(),
		true,
		lruEntry)
	if result.err != nil {
		log.WithContextFields(LogFields{"error": err}).Error("NewActivityMonitoredConn failed")
		return
	}

	// Relay channel to forwarded connection.

	log.WithContextFields(LogFields{"remoteAddr": remoteAddr}).Debug("relaying")

	// TODO: relay errors to fwdChannel.Stderr()?
	relayWaitGroup := new(sync.WaitGroup)
	relayWaitGroup.Add(1)
	go func() {
		defer relayWaitGroup.Done()
		// io.Copy allocates a 32K temporary buffer, and each port forward relay uses
		// two of these buffers; using io.CopyBuffer with a smaller buffer reduces the
		// overall memory footprint.
		bytes, err := io.CopyBuffer(
			fwdChannel, fwdConn, make([]byte, SSH_TCP_PORT_FORWARD_COPY_BUFFER_SIZE))
		atomic.AddInt64(&bytesDown, bytes)
		if err != nil && err != io.EOF {
			// Debug since errors such as "connection reset by peer" occur during normal operation
			log.WithContextFields(LogFields{"error": err}).Debug("downstream TCP relay failed")
		}
		// Interrupt upstream io.Copy when downstream is shutting down.
		// TODO: this is done to quickly cleanup the port forward when
		// fwdConn has a read timeout, but is it clean -- upstream may still
		// be flowing?
		fwdChannel.Close()
	}()
	bytes, err := io.CopyBuffer(
		fwdConn, fwdChannel, make([]byte, SSH_TCP_PORT_FORWARD_COPY_BUFFER_SIZE))
	atomic.AddInt64(&bytesUp, bytes)
	if err != nil && err != io.EOF {
		log.WithContextFields(LogFields{"error": err}).Debug("upstream TCP relay failed")
	}
	// Shutdown special case: fwdChannel will be closed and return EOF when
	// the SSH connection is closed, but we need to explicitly close fwdConn
	// to interrupt the downstream io.Copy, which may be blocked on a
	// fwdConn.Read().
	fwdConn.Close()

	relayWaitGroup.Wait()

	log.WithContextFields(
		LogFields{
			"remoteAddr": remoteAddr,
			"bytesUp":    atomic.LoadInt64(&bytesUp),
			"bytesDown":  atomic.LoadInt64(&bytesDown)}).Debug("exiting")
}