Esempio n. 1
0
//
// readSingleDocument is called by readSingleRecord when it has determined that the server
// has sent a docuemnt ('d'), not flat data ('f') or raw bytes ('b').
// It should be called *after* the single byte below on the first line has been already
// read and determined to be 'd'.  The rest the stream (NOT including the EOT byte) will
// be read.  The serialized document will be turned into an oschema.ODocument.
//
//     Writing byte (1 byte): 100 [OChannelBinaryServer]   <- 'd'=document ('f'=flat data, 'b'=raw bytes)
//     Writing short (2 bytes): 11 [OChannelBinaryServer]  <- cluster-id  (RID part 1)
//     Writing long (8 bytes): 0 [OChannelBinaryServer]    <- cluster-pos (RID part 2)
//     Writing int (4 bytes): 1 [OChannelBinaryServer]     <- version
//     Writing bytes (4+26=30 bytes): [0, 14, 80, 97, 116, ... , 110, 107, 1] <- serialized record
//
func readSingleDocument(dbc *DBClient) (*oschema.ODocument, error) {
	clusterId, err := rw.ReadShort(dbc.conx)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	clusterPos, err := rw.ReadLong(dbc.conx)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	recVersion, err := rw.ReadInt(dbc.conx)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	recBytes, err := rw.ReadBytes(dbc.conx)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}
	rid := oschema.ORID{ClusterID: clusterId, ClusterPos: clusterPos}
	doc, err := createDocumentFromBytes(rid, recVersion, recBytes, dbc)
	ogl.Debugf("::single record doc:::::: %v\n", doc)
	return doc, err
}
Esempio n. 2
0
//
// FetchFirstKeyOfRemoteLinkBag is the entry point for retrieving links from
// a remote server-side side LinkBag.  In general, this method should not be
// called by end users. Instead, end users should call FetchEntriesOfRemoteLinkBag
//
// TODO: make this an unexported func?
//
func FetchFirstKeyOfRemoteLinkBag(dbc *DBClient, linkBag *oschema.OLinkBag) (*oschema.OLink, error) {
	dbc.buf.Reset()

	err := writeCommandAndSessionId(dbc, REQUEST_SBTREE_BONSAI_FIRST_KEY)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	err = writeLinkBagCollectionPointer(dbc.buf, linkBag)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	// send to the OrientDB server
	_, err = dbc.conx.Write(dbc.buf.Bytes())
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	/* ---[ Read Response ]--- */

	err = readStatusCodeAndSessionId(dbc)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	firstKeyBytes, err := rw.ReadBytes(dbc.conx)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	var (
		typeByte  byte
		typeSerde binserde.OBinaryTypeSerializer
	)

	typeByte = firstKeyBytes[0]
	typeSerde = binserde.TypeSerializers[typeByte]
	result, err := typeSerde.Deserialize(bytes.NewBuffer(firstKeyBytes[1:]))
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	firstLink, ok := result.(*oschema.OLink)

	if !ok {
		// TODO: fmt.Errorf is an anti-pattern
		return nil, fmt.Errorf("Typecast error. Expected *oschema.OLink but is %T", result)
	}

	return firstLink, nil
}
Esempio n. 3
0
//
// readResultSet should be called for collections (resultType = 'l')
// from a SQLQuery call.
//
func readResultSet(dbc *DBClient) ([]*oschema.ODocument, error) {
	// for Collection
	// next val is: (collection-size:int)
	// and then each record is serialized according to format:
	// (0:short)(record-type:byte)(cluster-id:short)(cluster-position:long)(record-version:int)(record-content:bytes)

	resultSetSize, err := rw.ReadInt(dbc.conx)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	rsize := int(resultSetSize)
	docs := make([]*oschema.ODocument, rsize)

	for i := 0; i < rsize; i++ {
		// TODO: move code below to readRecordInResultSet
		// this apparently should always be zero for serialized records -> not sure it's meaning
		zero, err := rw.ReadShort(dbc.conx)
		if err != nil {
			return nil, oerror.NewTrace(err)
		}
		if zero != int16(0) {
			return nil, fmt.Errorf("ERROR: readResultSet: expected short value of 0 but is %d", zero)
		}

		recType, err := rw.ReadByte(dbc.conx)
		if err != nil {
			return nil, oerror.NewTrace(err)
		}

		// TODO: may need to check recType here => not sure that clusterId, clusterPos and version follow next if
		//       type is 'b' (raw bytes) or 'f' (flat record)
		//       see the readSingleDocument method (and probably call that one instead?)
		clusterId, err := rw.ReadShort(dbc.conx)
		if err != nil {
			return nil, oerror.NewTrace(err)
		}

		clusterPos, err := rw.ReadLong(dbc.conx)
		if err != nil {
			return nil, oerror.NewTrace(err)
		}

		recVersion, err := rw.ReadInt(dbc.conx)
		if err != nil {
			return nil, oerror.NewTrace(err)
		}
		if recType == byte('d') { // Document
			var doc *oschema.ODocument
			rid := oschema.ORID{ClusterID: clusterId, ClusterPos: clusterPos}
			recBytes, err := rw.ReadBytes(dbc.conx)
			if err != nil {
				return nil, oerror.NewTrace(err)
			}
			doc, err = createDocumentFromBytes(rid, recVersion, recBytes, dbc)
			if err != nil {
				return nil, oerror.NewTrace(err)
			}
			docs[i] = doc

		} else {
			_, file, line, _ := runtime.Caller(0)
			return nil, fmt.Errorf("%v: %v: Record type %v is not yet supported", file, line+1, recType)
		}
	} // end for loop

	// end, err := rw.ReadByte(dbc.conx)
	// if err != nil {
	// 	return nil, oerror.NewTrace(err)
	// }
	// if end != byte(0) {
	// 	return nil, fmt.Errorf("Final Byte read from collection result set was not 0, but was: %v", end)
	// }
	return docs, nil
}
Esempio n. 4
0
//
// SQLCommand executes SQL commands that are not queries. Any SQL statement
// that does not being with "SELECT" should be sent here.  All SELECT
// statements should go to the SQLQuery function.
//
// Commands can be optionally paramterized using ?, such as:
//
//     INSERT INTO Foo VALUES(a, b, c) (?, ?, ?)
//
// The values for the placeholders (currently) must be provided as strings.
//
// Constraints (for now):
// 1. cmds with only simple positional parameters allowed
// 2. cmds with lists of parameters ("complex") NOT allowed
// 3. parameter types allowed: string only for now
//
// SQL commands in OrientDB tend to return one of two types - a string return value or
// one or more documents. The meaning are specific to the type of query.
//
// ----------------
// For example:
// ----------------
//  for a DELETE statement:
//    retval = number of rows deleted (as a string)
//    docs = empty list
//
//  for an INSERT statement:
//    n = ?
//    docs = ?
//
//  for an CREATE CLASS statement:
//    retval = cluster id of the class (TODO: or it might be number of classes in cluster)
//    docs = empty list
//
//  for an DROP CLASS statement:
//    retval = "true" if successful, "" if class didn't exist (technically it returns null)
//    docs = empty list
//
func SQLCommand(dbc *DBClient, sql string, params ...string) (retval string, docs []*oschema.ODocument, err error) {
	dbc.buf.Reset()

	err = writeCommandAndSessionId(dbc, REQUEST_COMMAND)
	if err != nil {
		return "", nil, oerror.NewTrace(err)
	}

	mode := byte('s') // synchronous only supported for now
	err = rw.WriteByte(dbc.buf, mode)
	if err != nil {
		return "", nil, oerror.NewTrace(err)
	}

	// need a separate buffer to write the command-payload to, so
	// we can calculate its length before writing it to main dbc.buf
	commandBuf := new(bytes.Buffer)

	// "classname" (command-type, really) and the sql command
	err = rw.WriteStrings(commandBuf, "c", sql) // c for command(non-idempotent)
	if err != nil {
		return "", nil, oerror.NewTrace(err)
	}

	// SQLCommand
	//  (text:string)
	//  (has-simple-parameters:boolean)
	//  (simple-paremeters:bytes[])  -> serialized Map (EMBEDDEDMAP??)
	//  (has-complex-parameters:boolean)
	//  (complex-parameters:bytes[])  -> serialized Map (EMBEDDEDMAP??)

	serializedParams, err := serializeSimpleSQLParams(dbc, params)
	if err != nil {
		return "", nil, oerror.NewTrace(err)
	}

	// has-simple-parameters
	err = rw.WriteBool(commandBuf, serializedParams != nil)
	if err != nil {
		return "", nil, oerror.NewTrace(err)
	}

	if serializedParams != nil {
		rw.WriteBytes(commandBuf, serializedParams)
	}

	// FIXME: no complex parameters yet since I don't understand what they are
	// has-complex-paramters => HARDCODING FALSE FOR NOW
	err = rw.WriteBool(commandBuf, false)
	if err != nil {
		return "", nil, oerror.NewTrace(err)
	}

	serializedCmd := commandBuf.Bytes()

	// command-payload-length and command-payload
	err = rw.WriteBytes(dbc.buf, serializedCmd)
	if err != nil {
		return "", nil, oerror.NewTrace(err)
	}

	// send to the OrientDB server
	_, err = dbc.conx.Write(dbc.buf.Bytes())
	if err != nil {
		return "", nil, oerror.NewTrace(err)
	}

	/* ---[ Read Response ]--- */

	err = readStatusCodeAndSessionId(dbc)
	if err != nil {
		return "", nil, oerror.NewTrace(err)
	}

	// for synchronous commands the remaining content is an array of form:
	// [(synch-result-type:byte)[(synch-result-content:?)]]+
	// so the final value will by byte(0) to indicate the end of the array
	// and we must use a loop here

	for {
		resType, err := rw.ReadByte(dbc.conx)
		if err != nil {
			return "", nil, oerror.NewTrace(err)
		}
		// This implementation assumes that SQLCommand can never have "supplementary records"
		// from an extended fetchPlan
		if resType == byte(0) {
			break
		}

		resultType := rune(resType)
		ogl.Debugf("resultType for SQLCommand: %v (%s)\n", resultType, string(rune(resultType)))

		if resultType == 'n' { // null result
			// do nothing - anything need to be done here?

		} else if resultType == 'r' { // single record
			doc, err := readSingleRecord(dbc)
			if err != nil {
				return "", nil, oerror.NewTrace(err)
			}

			ogl.Debugf("r>doc = %v\n", doc) // DEBUG
			if doc != nil {
				docs = make([]*oschema.ODocument, 1)
				docs[0] = doc
			}

		} else if resultType == 'l' { // collection of records
			ogl.Debugln("... resultType l")
			collectionDocs, err := readResultSet(dbc)
			if err != nil {
				return "", nil, oerror.NewTrace(err)
			}

			if docs == nil {
				docs = collectionDocs
			} else {
				docs = append(docs, collectionDocs...)
			}

		} else if resultType == 'a' { // serialized type
			serializedRec, err := rw.ReadBytes(dbc.conx)
			if err != nil {
				return "", nil, oerror.NewTrace(err)
			}
			// TODO: for now I'm going to assume that this always just returns a string
			//       need a use case that violates this assumption
			retval = string(serializedRec)
			if err != nil {
				return "", nil, oerror.NewTrace(err)
			}

		} else {
			_, file, line, _ := runtime.Caller(0)
			// TODO: I've not yet tested this route of code -> how do so?
			ogl.Warnf(">> Got back resultType %v (%v): Not yet supported: line:%d; file:%s\n",
				resultType, string(rune(resultType)), line, file)
			// TODO: returning here is NOT the correct long-term behavior
			return "", nil, fmt.Errorf("Got back resultType %v (%v): Not yet supported: line:%d; file:%s\n",
				resultType, string(rune(resultType)), line, file)
		}
	}

	return retval, docs, err
}
Esempio n. 5
0
//
// FetchEntriesOfRemoteLinkBag fills in the links of an OLinkBag that is remote
// (tree-based) rather than embedded.  This function will fill in the links
// of the passed in OLinkBag, rather than returning the new links. The Links
// will have RIDs only, not full Records (ODocuments).  If you then want the
// Records filled in, call the ResolveLinks function.
//
func FetchEntriesOfRemoteLinkBag(dbc *DBClient, linkBag *oschema.OLinkBag, inclusive bool) error {
	var (
		firstLink *oschema.OLink
		linkSerde binserde.OBinaryTypeSerializer
		err       error
	)

	firstLink, err = FetchFirstKeyOfRemoteLinkBag(dbc, linkBag)
	if err != nil {
		return oerror.NewTrace(err)
	}

	dbc.buf.Reset()

	err = writeCommandAndSessionId(dbc, REQUEST_SBTREE_BONSAI_GET_ENTRIES_MAJOR)
	if err != nil {
		return oerror.NewTrace(err)
	}

	err = writeLinkBagCollectionPointer(dbc.buf, linkBag)
	if err != nil {
		return oerror.NewTrace(err)
	}

	typeByte := byte(9)
	linkSerde = binserde.TypeSerializers[typeByte] // the OLinkSerializer

	linkBytes, err := linkSerde.Serialize(firstLink)
	if err != nil {
		return oerror.NewTrace(err)
	}

	err = rw.WriteBytes(dbc.buf, linkBytes)
	if err != nil {
		return oerror.NewTrace(err)
	}

	err = rw.WriteBool(dbc.buf, inclusive)
	if err != nil {
		return oerror.NewTrace(err)
	}

	// copied from Java client OSBTreeBonsaiRemote#fetchEntriesMajor
	if dbc.binaryProtocolVersion >= 21 {
		err = rw.WriteInt(dbc.buf, 128)
	}

	// send to the OrientDB server
	_, err = dbc.conx.Write(dbc.buf.Bytes())
	if err != nil {
		return oerror.NewTrace(err)
	}

	/* ---[ Read Response ]--- */

	err = readStatusCodeAndSessionId(dbc)
	if err != nil {
		return oerror.NewTrace(err)
	}

	linkEntryBytes, err := rw.ReadBytes(dbc.conx)
	if err != nil {
		return oerror.NewTrace(err)
	}

	// all the rest of the response from the server in in this byte slice so
	// we can reset the dbc.buf and reuse it to deserialize the serialized links
	dbc.buf.Reset()
	// ignoring error since doc says this method panics rather than return
	// non-nil error
	n, _ := dbc.buf.Write(linkEntryBytes)
	if n != len(linkEntryBytes) {
		return fmt.Errorf("Unexpected error when writing bytes to bytes.Buffer")
	}

	nrecs, err := rw.ReadInt(dbc.buf)
	if err != nil {
		return oerror.NewTrace(err)
	}

	var result interface{}
	nr := int(nrecs)
	// loop over all the serialized links
	for i := 0; i < nr; i++ {
		result, err = linkSerde.Deserialize(dbc.buf)
		if err != nil {
			return oerror.NewTrace(err)
		}
		linkBag.AddLink(result.(*oschema.OLink))

		// FIXME: for some reason the server returns a serialized link
		//        followed by an integer (so far always a 1 in my expts).
		//        Not sure what to do with this int, so ignore for now
		intval, err := rw.ReadInt(dbc.buf)
		if err != nil {
			return oerror.NewTrace(err)
		}
		if intval != int32(1) {
			ogl.Warnf("DEBUG: Found a use case where the val pair of a link was not 1: %d\n", intval)
		}
	}

	return nil
}
Esempio n. 6
0
//
// FetchRecordByRID takes an ORID and reads that record from the database.
// NOTE: for now I'm assuming all records are Documents (they can also be "raw bytes" or "flat data")
// and for some reason I don't understand, multiple records can be returned, so I'm returning
// a slice of ODocument
//
// TODO: may also want to expose options: ignoreCache, loadTombstones bool
// TODO: need to properly handle fetchPlan
func FetchRecordByRID(dbc *DBClient, orid oschema.ORID, fetchPlan string) ([]*oschema.ODocument, error) {
	dbc.buf.Reset()

	err := writeCommandAndSessionId(dbc, REQUEST_RECORD_LOAD)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	err = rw.WriteShort(dbc.buf, orid.ClusterID)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	err = rw.WriteLong(dbc.buf, orid.ClusterPos)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	err = rw.WriteString(dbc.buf, fetchPlan)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	ignoreCache := true // hardcoding for now
	err = rw.WriteBool(dbc.buf, ignoreCache)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	loadTombstones := false // hardcoding for now
	err = rw.WriteBool(dbc.buf, loadTombstones)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	// send to the OrientDB server
	_, err = dbc.conx.Write(dbc.buf.Bytes())
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	/* ---[ Read Response ]--- */

	err = readStatusCodeAndSessionId(dbc)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	// this query can return multiple records (though I don't understand why)
	// so must do this in a loop
	docs := make([]*oschema.ODocument, 0, 1)
	for {
		payloadStatus, err := rw.ReadByte(dbc.conx)
		if err != nil {
			return nil, oerror.NewTrace(err)
		}

		if payloadStatus == byte(0) {
			break
		}

		rectype, err := rw.ReadByte(dbc.conx)
		if err != nil {
			return nil, oerror.NewTrace(err)
		}

		recversion, err := rw.ReadInt(dbc.conx)
		if err != nil {
			return nil, oerror.NewTrace(err)
		}

		databytes, err := rw.ReadBytes(dbc.conx)
		if err != nil {
			return nil, oerror.NewTrace(err)
		}

		ogl.Debugf("rectype:%v, recversion:%v, len(databytes):%v\n", rectype, recversion, len(databytes))

		if rectype == 'd' {
			// we don't know the classname so set empty value
			doc := oschema.NewDocument("")
			doc.RID = orid
			doc.Version = recversion

			// the first byte specifies record serialization version
			// use it to look up serializer
			serde := dbc.RecordSerDes[int(databytes[0])]
			// then strip off the version byte and send the data to the serde
			err = serde.Deserialize(dbc, doc, obuf.NewReadBuffer(databytes[1:]))
			if err != nil {
				return nil, fmt.Errorf("ERROR in Deserialize for rid %v: %v\n", orid, err)
			}
			docs = append(docs, doc)

		} else {
			return nil,
				fmt.Errorf("Only `document` records are currently supported by the client. Record returned was type: %v", rectype)
		}
	}

	return docs, nil
}
Esempio n. 7
0
//
// OpenDatabase sends the REQUEST_DB_OPEN command to the OrientDB server to
// open the db in read/write mode.  The database name and type are required, plus
// username and password.  Database type should be one of the obinary constants:
// DocumentDBType or GraphDBType.
//
func OpenDatabase(dbc *DBClient, dbname string, dbtype constants.DatabaseType, username, passw string) error {
	buf := dbc.buf
	buf.Reset()

	// first byte specifies request type
	err := rw.WriteByte(buf, REQUEST_DB_OPEN)
	if err != nil {
		return oerror.NewTrace(err)
	}

	// session-id - send a negative number to create a new server-side conx
	err = rw.WriteInt(buf, RequestNewSession)
	if err != nil {
		return oerror.NewTrace(err)
	}

	err = rw.WriteStrings(buf, DriverName, DriverVersion)
	if err != nil {
		return oerror.NewTrace(err)
	}

	err = rw.WriteShort(buf, dbc.binaryProtocolVersion)
	if err != nil {
		return oerror.NewTrace(err)
	}

	// dbclient id - send as null, but cannot be null if clustered config
	// TODO: change to use dbc.clusteredConfig once that is added
	err = rw.WriteNull(buf)
	if err != nil {
		return oerror.NewTrace(err)
	}

	// serialization-impl
	err = rw.WriteString(buf, dbc.serializationType)
	if err != nil {
		return oerror.NewTrace(err)
	}

	// token-session  // TODO: hardcoded as false for now -> change later based on ClientOptions settings
	err = rw.WriteBool(buf, false)
	if err != nil {
		return oerror.NewTrace(err)
	}

	// dbname, dbtype, username, password
	err = rw.WriteStrings(buf, dbname, string(dbtype), username, passw)
	if err != nil {
		return oerror.NewTrace(err)
	}

	// now send to the OrientDB server
	_, err = dbc.conx.Write(buf.Bytes())
	if err != nil {
		return oerror.NewTrace(err)
	}

	/* ---[ read back response ]--- */

	// first byte indicates success/error
	status, err := rw.ReadByte(dbc.conx)
	if err != nil {
		return oerror.NewTrace(err)
	}

	dbc.currDB = NewDatabase(dbname, dbtype)

	// the first int returned is the session id sent - which was the `RequestNewSession` sentinel
	sessionValSent, err := rw.ReadInt(dbc.conx)
	if err != nil {
		return oerror.NewTrace(err)
	}
	if sessionValSent != RequestNewSession {
		return errors.New("Unexpected Error: Server did not return expected session-request-val that was sent")
	}

	// if status returned was ERROR, then the rest of server data is the exception info
	if status != RESPONSE_STATUS_OK {
		exceptions, err := rw.ReadErrorResponse(dbc.conx)
		if err != nil {
			return oerror.NewTrace(err)
		}
		return fmt.Errorf("Server Error(s): %v", exceptions)
	}

	// for the REQUEST_DB_OPEN case, another int is returned which is the new sessionId
	sessionId, err := rw.ReadInt(dbc.conx)
	if err != nil {
		return oerror.NewTrace(err)
	}
	dbc.sessionId = sessionId

	// next is the token, which may be null
	tokenBytes, err := rw.ReadBytes(dbc.conx)
	if err != nil {
		return oerror.NewTrace(err)
	}
	dbc.token = tokenBytes

	// array of cluster info in this db // TODO: do we need to retain all this in memory?
	numClusters, err := rw.ReadShort(dbc.conx)
	if err != nil {
		return oerror.NewTrace(err)
	}

	clusters := make([]OCluster, 0, numClusters)

	for i := 0; i < int(numClusters); i++ {
		clusterName, err := rw.ReadString(dbc.conx)
		if err != nil {
			return oerror.NewTrace(err)
		}
		clusterId, err := rw.ReadShort(dbc.conx)
		if err != nil {
			return oerror.NewTrace(err)
		}
		clusters = append(clusters, OCluster{Name: clusterName, Id: clusterId})
	}
	dbc.currDB.Clusters = clusters

	// cluster-config - bytes - null unless running server in clustered config
	// TODO: treating this as an opaque blob for now
	clusterCfg, err := rw.ReadBytes(dbc.conx)
	if err != nil {
		return oerror.NewTrace(err)
	}
	dbc.currDB.ClustCfg = clusterCfg

	// orientdb server release - throwing away for now // TODO: need this?
	_, err = rw.ReadString(dbc.conx)
	if err != nil {
		return oerror.NewTrace(err)
	}

	//
	/* ---[ load #0:0 - config record ]--- */
	schemaRIDStr, err := loadConfigRecord(dbc)
	if err != nil {
		return oerror.NewTrace(err)
	}
	clusterID, clusterPos, err := parseRid(schemaRIDStr)
	if err != nil {
		return oerror.NewTrace(err)
	}

	//
	/* ---[ load #0:1 - schema record ]--- */
	err = loadSchema(dbc, oschema.ORID{ClusterID: clusterID, ClusterPos: clusterPos})
	if err != nil {
		return oerror.NewTrace(err)
	}

	return nil
}
Esempio n. 8
0
//
// loadConfigRecord loads record #0:0 for the current database, caching
// some of the information returned into OStorageConfiguration
//
func loadConfigRecord(dbc *DBClient) (schemaRID string, err error) {
	// The config record comes back as type 'b' (raw bytes), which should
	// just be converted to a string then tokenized by the pipe char

	dbc.buf.Reset()
	var (
		clusterId  int16
		clusterPos int64
	)
	err = writeCommandAndSessionId(dbc, REQUEST_RECORD_LOAD)
	if err != nil {
		return schemaRID, err
	}

	clusterId = 0
	err = rw.WriteShort(dbc.buf, clusterId)
	if err != nil {
		return schemaRID, err
	}

	clusterPos = 0
	err = rw.WriteLong(dbc.buf, clusterPos)
	if err != nil {
		return schemaRID, err
	}

	fetchPlan := "*:-1 index:0"
	err = rw.WriteString(dbc.buf, fetchPlan)
	if err != nil {
		return schemaRID, err
	}

	ignoreCache := true
	err = rw.WriteBool(dbc.buf, ignoreCache)
	if err != nil {
		return schemaRID, err
	}

	loadTombstones := true // based on Java client code
	err = rw.WriteBool(dbc.buf, loadTombstones)
	if err != nil {
		return schemaRID, err
	}

	// send to the OrientDB server
	_, err = dbc.conx.Write(dbc.buf.Bytes())
	if err != nil {
		return schemaRID, err
	}

	/* ---[ Read Response ]--- */

	err = readStatusCodeAndSessionId(dbc)
	if err != nil {
		return schemaRID, err
	}

	payloadStatus, err := rw.ReadByte(dbc.conx)
	if err != nil {
		return schemaRID, err
	}

	if payloadStatus == byte(0) {
		return schemaRID, errors.New("Payload status for #0:0 load was 0. No config data returned.")
	}

	rectype, err := rw.ReadByte(dbc.conx)
	if err != nil {
		return schemaRID, err
	}

	// this is the record version - don't see a reason to check or cache it right now
	_, err = rw.ReadInt(dbc.conx)
	if err != nil {
		return schemaRID, err
	}

	databytes, err := rw.ReadBytes(dbc.conx)
	if err != nil {
		return schemaRID, err
	}

	if rectype != 'b' {
		if err != nil {
			return schemaRID, fmt.Errorf("Expected rectype %d, but was: %d", 'b', rectype)
		}
	}

	payloadStatus, err = rw.ReadByte(dbc.conx)
	if err != nil {
		return schemaRID, err
	}

	if payloadStatus != byte(0) {
		return schemaRID,
			errors.New("Second Payload status for #0:0 load was not 0. More than one record returned unexpectedly")
	}

	err = parseConfigRecord(dbc.currDB, string(databytes))
	if err != nil {
		return schemaRID, err
	}

	schemaRID = dbc.currDB.StorageCfg.schemaRID
	return schemaRID, err
}
Esempio n. 9
0
//
// RequestDBList works like the "list databases" command from the OrientDB client.
// The result is put into a map, where the key of the map is the name of the
// database and the value is the type concatenated with the path, like so:
//
//     key:  cars
//     val:  plocal:/path/to/orientdb-community-2.0.1/databases/cars
//
func RequestDBList(dbc *DBClient) (map[string]string, error) {
	dbc.buf.Reset()

	if dbc.sessionId == NoSessionID {
		return nil, oerror.SessionNotInitialized{}
	}

	// cmd
	err := rw.WriteByte(dbc.buf, REQUEST_DB_LIST)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	// session id
	err = rw.WriteInt(dbc.buf, dbc.sessionId)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	// send to the OrientDB server
	_, err = dbc.conx.Write(dbc.buf.Bytes())
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	status, err := rw.ReadByte(dbc.conx)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	err = readAndValidateSessionId(dbc.conx, dbc.sessionId)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	if status == RESPONSE_STATUS_ERROR {
		serverExceptions, err := rw.ReadErrorResponse(dbc.conx)
		if err != nil {
			return nil, oerror.NewTrace(err)
		}
		return nil, fmt.Errorf("Server Error(s): %v", serverExceptions)
	}

	// the bytes returned as a serialized EMBEDDEDMAP, so send it to the SerDe
	responseBytes, err := rw.ReadBytes(dbc.conx)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	serde := dbc.RecordSerDes[int(responseBytes[0])]
	buf := obuf.NewReadBuffer(responseBytes[1:])
	doc := oschema.NewDocument("")
	err = serde.Deserialize(dbc, doc, buf)
	if err != nil {
		return nil, oerror.NewTrace(err)
	}

	m := make(map[string]string)
	fldMap := doc.GetField("databases").Value.(map[string]interface{})
	for k, v := range fldMap {
		m[k] = v.(string)
	}

	return m, nil
}
Esempio n. 10
0
//
// ConnectToServer logs into the OrientDB server with the appropriate
// admin privileges in order to execute server-level commands (as opposed
// to database-level commands). This must be called to establish a server
// session before any other server-level commands. The username and password
// required are for the server (admin) not any particular database.
//
func ConnectToServer(dbc *DBClient, adminUser, adminPassw string) error {
	buf := dbc.buf
	buf.Reset()

	// first byte specifies request type
	err := rw.WriteByte(buf, REQUEST_CONNECT)
	if err != nil {
		return err
	}

	// session-id - send a negative number to create a new server-side conx
	err = rw.WriteInt(buf, RequestNewSession)
	if err != nil {
		return err
	}

	err = rw.WriteStrings(buf, DriverName, DriverVersion)
	if err != nil {
		return err
	}

	err = rw.WriteShort(buf, dbc.binaryProtocolVersion)
	if err != nil {
		return err
	}

	// dbclient id - send as null, but cannot be null if clustered config
	// TODO: change to use dbc.clusteredConfig once that is added
	err = rw.WriteNull(buf)
	if err != nil {
		return err
	}

	// serialization-impl
	err = rw.WriteString(buf, dbc.serializationType)
	if err != nil {
		return err
	}

	// token-session  // TODO: hardcoded as false for now -> change later based on ClientOptions settings
	err = rw.WriteBool(buf, false)
	if err != nil {
		return err
	}

	// admin username, password
	err = rw.WriteStrings(buf, adminUser, adminPassw)
	if err != nil {
		return err
	}

	// send to OrientDB server
	_, err = dbc.conx.Write(buf.Bytes())
	if err != nil {
		return err
	}

	/* ---[ Read Server Response ]--- */

	// first byte indicates success/error
	status, err := rw.ReadByte(dbc.conx)
	if err != nil {
		return err
	}

	// the first int returned is the session id sent - which was the `RequestNewSession` sentinel
	sessionValSent, err := rw.ReadInt(dbc.conx)
	if err != nil {
		return err
	}
	if sessionValSent != RequestNewSession {
		return errors.New("Unexpected Error: Server did not return expected session-request-val that was sent")
	}

	// if status returned was ERROR, then the rest of server data is the exception info
	if status != RESPONSE_STATUS_OK {
		exceptions, err := rw.ReadErrorResponse(dbc.conx)
		if err != nil {
			return err
		}
		return fmt.Errorf("Server Error(s): %v", exceptions)
	}

	// for the REQUEST_CONNECT case, another int is returned which is the new sessionId
	sessionId, err := rw.ReadInt(dbc.conx)
	if err != nil {
		return err
	}
	// TODO: this assumes you can only have one sessionId - but perhaps can have a server sessionid
	//       and one or more database sessions open at the same time ?????
	dbc.sessionId = sessionId

	tokenBytes, err := rw.ReadBytes(dbc.conx)
	if err != nil {
		return err
	}
	dbc.token = tokenBytes
	return nil
}