//RotatorTranslatorToSuper superimposes the set of cartesian coordinates given as the rows of the matrix test on the gnOnes of the rows
//of the matrix templa. Returns the transformed matrix, the rotation matrix, 2 translation row vectors
//For the superposition plus an error. In order to perform the superposition, without using the transformed
//the first translation vector has to be added first to the moving matrix, then the rotation must be performed
//and finally the second translation has to be added.
//This is a low level function, although one can use it directly since it returns the transformed matrix.
//The math for this function is by Prof. Veronica Jimenez-Curihual, University of Concepcion, Chile.
func RotatorTranslatorToSuper(test, templa *v3.Matrix) (*v3.Matrix, *v3.Matrix, *v3.Matrix, *v3.Matrix, error) {
tmr, tmc := templa.Dims()
tsr, tsc := test.Dims()
if tmr != tsr || tmc != 3 || tsc != 3 {
return nil, nil, nil, nil, CError{"goChem: Ill-formed matrices", []string{"RotatorTranslatorToSuper"}}
}
var Scal float64
Scal = float64(1.0) / float64(tmr)
j := gnOnes(tmr, 1) //Mass is not important for this matter so we'll just use this.
ctest, distest, err := MassCenter(test, test, j)
if err != nil {
return nil, nil, nil, nil, errDecorate(err, "RotatorTranslatorToSuper")
}
ctempla, distempla, err := MassCenter(templa, templa, j)
if err != nil {
return nil, nil, nil, nil, errDecorate(err, "RotatorTranslatorToSuper")
}
Mid := gnEye(tmr)
jT := gnT(j)
ScaledjProd := gnMul(j, jT)
ScaledjProd.Scale(Scal, ScaledjProd)
aux2 := gnMul(gnT(ctempla), Mid)
r, _ := aux2.Dims()
Maux := v3.Zeros(r)
Maux.Mul(aux2, ctest)
Maux.Tr() //Dont understand why this is needed
factors := mat64.SVD(v3.Matrix2Dense(Maux), appzero, math.SmallestNonzeroFloat64, true, true)
U := factors.U
V := factors.V
// if err != nil {
// return nil, nil, nil, nil, err //I'm not sure what err is this one
// }
U.Scale(-1, U)
V.Scale(-1, V)
//SVD gives different results here than in numpy. U and V are multiplide by -1 in one of them
//and gomatrix gives as V the transpose of the matrix given as V by numpy. I guess is not an
//error, but don't know for sure.
vtr, _ := V.Dims()
Rotation := v3.Zeros(vtr)
Rotation.Mul(V, gnT(U))
Rotation.Tr() //Don't know why does this work :(
RightHand := gnEye(3)
if det(Rotation) < 0 {
RightHand.Set(2, 2, -1)
Rotation.Mul(V, RightHand)
Rotation.Mul(Rotation, gnT(U)) //If I get this to work Ill arrange so gnT(U) is calculated once, not twice as now.
Rotation.Tr() //TransposeTMP contains the transpose of the original Rotation //Same, no ide why I need this
//return nil, nil, nil, nil, fmt.Errorf("Got a reflection instead of a translations. The objects may be specular images of each others")
}
jT.Scale(Scal, jT)
subtempla := v3.Zeros(tmr)
subtempla.Copy(ctempla)
sub := v3.Zeros(ctest.NVecs())
sub.Mul(ctest, Rotation)
subtempla.Sub(subtempla, sub)
jtr, _ := jT.Dims()
Translation := v3.Zeros(jtr)
Translation.Mul(jT, subtempla)
Translation.Add(Translation, distempla)
//This alings the transformed with the original template, not the mean centrate one
transformed := v3.Zeros(ctest.NVecs())
transformed.Mul(ctest, Rotation)
transformed.AddVec(transformed, Translation)
//end transformed
distest.Scale(-1, distest)
return transformed, Rotation, distest, Translation, nil
}
//Next Reads the next frame in a XTCObj that has been initialized for read
//With initread. If keep is true, returns a pointer to matrix.DenseMatrix
//With the coordinates read, otherwiser, it discards the coordinates and
//returns nil.
func (X *XTCObj) Next(output *v3.Matrix) error {
if !X.Readable() {
return Error{TrajUnIni, X.filename, []string{"Next"}, true}
}
cnatoms := C.int(X.natoms)
worked := C.get_coords(X.fp, &X.cCoords[0], cnatoms)
if worked == 11 {
X.readable = false
return newlastFrameError(X.filename, "Next") //This is not really an error and should be catched in the calling function
}
if worked != 0 {
X.readable = false
return Error{ReadError, X.filename, []string{"Next"}, true}
}
if output != nil { //col the frame
r, c := output.Dims()
if r < (X.natoms) {
panic("Buffer v3.Matrix too small to hold trajectory frame")
}
for j := 0; j < r; j++ {
for k := 0; k < c; k++ {
l := k + (3 * j)
output.Set(j, k, (10 * float64(X.cCoords[l]))) //nm to Angstroms
}
}
return nil
}
return nil //Just drop the frame
}
//BestPlane returns a row vector that is normal to the plane that best contains the molecule
//if passed a nil Masser, it will simply set all masses to 1.
func BestPlane(coords *v3.Matrix, mol Masser) (*v3.Matrix, error) {
var err error
var Mmass []float64
cr, _ := coords.Dims()
if mol != nil {
Mmass, err = mol.Masses()
if err != nil {
return nil, errDecorate(err, "BestPlane")
}
if len(Mmass) != cr {
return nil, CError{fmt.Sprintf("Inconsistent coordinates(%d)/atoms(%d)", len(Mmass), cr), []string{"BestPlane"}}
}
}
moment, err := MomentTensor(coords, Mmass)
if err != nil {
return nil, errDecorate(err, "BestPlane")
}
evecs, _, err := v3.EigenWrap(moment, appzero)
if err != nil {
return nil, errDecorate(err, "BestPlane")
}
normal, err := BestPlaneP(evecs)
if err != nil {
return nil, errDecorate(err, "BestPlane")
}
//MomentTensor(, mass)
return normal, err
}
//MomentTensor returns the moment tensor for a matrix A of coordinates and a column
//vector mass with the respective massess.
func MomentTensor(A *v3.Matrix, massslice []float64) (*v3.Matrix, error) {
ar, ac := A.Dims()
var err error
var mass *mat64.Dense
if massslice == nil {
mass = gnOnes(ar, 1)
} else {
mass = mat64.NewDense(ar, 1, massslice)
// if err != nil {
// return nil, err
// }
}
center, _, err := MassCenter(A, v3.Dense2Matrix(gnCopy(A)), mass)
if err != nil {
return nil, errDecorate(err, "MomentTensor")
}
sqrmass := gnZeros(ar, 1)
// sqrmass.Pow(mass,0.5)
pow(mass, sqrmass, 0.5) //the result is stored in sqrmass
// fmt.Println(center,sqrmass) ////////////////////////
center.ScaleByCol(center, sqrmass)
// fmt.Println(center,"scaled center")
centerT := gnZeros(ac, ar)
centerT.Copy(center.T())
moment := gnMul(centerT, center)
return v3.Dense2Matrix(moment), nil
}
//MassCenter centers in in the center of mass of oref. Mass must be
//A column vector. Returns the centered matrix and the displacement matrix.
func MassCenter(in, oref *v3.Matrix, mass *mat64.Dense) (*v3.Matrix, *v3.Matrix, error) {
or, _ := oref.Dims()
ir, _ := in.Dims()
if mass == nil { //just obtain the geometric center
tmp := ones(or)
mass = mat64.NewDense(or, 1, tmp) //gnOnes(or, 1)
}
ref := v3.Zeros(or)
ref.Copy(oref)
gnOnesvector := gnOnes(1, or)
f := func() { ref.ScaleByCol(ref, mass) }
if err := gnMaybe(gnPanicker(f)); err != nil {
return nil, nil, CError{err.Error(), []string{"v3.Matrix.ScaleByCol", "MassCenter"}}
}
ref2 := v3.Zeros(1)
g := func() { ref2.Mul(gnOnesvector, ref) }
if err := gnMaybe(gnPanicker(g)); err != nil {
return nil, nil, CError{err.Error(), []string{"v3.gOnesVector", "MassCenter"}}
}
ref2.Scale(1.0/mass.Sum(), ref2)
returned := v3.Zeros(ir)
returned.Copy(in)
returned.SubVec(returned, ref2)
/* for i := 0; i < ir; i++ {
if err := returned.GetRowVector(i).Subtract(ref2); err != nil {
return nil, nil, err
}
}
*/
return returned, ref2, nil
}
//PDBStringWrite writes a string in PDB format for a given reference, coordinate set and bfactor set, which must match each other
//returns the written string and error or nil.
func PDBStringWrite(coords *v3.Matrix, mol Atomer, bfact []float64) (string, error) {
if bfact == nil {
bfact = make([]float64, mol.Len())
}
cr, _ := coords.Dims()
br := len(bfact)
if cr != mol.Len() || cr != br {
return "", CError{"Ref and Coords and/or Bfactors dont have the same number of atoms", []string{"PDBStringWrite"}}
}
chainprev := mol.Atom(0).Chain //this is to know when the chain changes.
var outline string
var outstring string
var err error
for i := 0; i < mol.Len(); i++ {
// r,c:=coords.Dims()
// fmt.Println("IIIIIIIIIIIi", i,coords,r,c, "lllllll")
writecoord := coords.VecView(i)
outline, chainprev, err = writePDBLine(mol.Atom(i), writecoord, bfact[i], chainprev)
if err != nil {
return "", errDecorate(err, "PDBStringWrite "+fmt.Sprintf("Could not print PDB line: %d", i))
}
outstring = strings.Join([]string{outstring, outline}, "")
}
outstring = strings.Join([]string{outstring, "END\n"}, "")
return outstring, nil
}
func pdbWrite(out io.Writer, coords *v3.Matrix, mol Atomer, bfact []float64) error {
if bfact == nil {
bfact = make([]float64, mol.Len())
}
cr, _ := coords.Dims()
br := len(bfact)
if cr != mol.Len() || cr != br {
return CError{"Ref and Coords and/or Bfactors dont have the same number of atoms", []string{"pdbWrite"}}
}
chainprev := mol.Atom(0).Chain //this is to know when the chain changes.
var outline string
var err error
iowriteError := func(err error) error {
return CError{"Failed to write in io.Writer" + err.Error(), []string{"io.Write.Write", "pdbWrite"}}
}
for i := 0; i < mol.Len(); i++ {
// r,c:=coords.Dims()
// fmt.Println("IIIIIIIIIIIi", i,coords,r,c, "lllllll")
writecoord := coords.VecView(i)
outline, chainprev, err = writePDBLine(mol.Atom(i), writecoord, bfact[i], chainprev)
if err != nil {
return errDecorate(err, "pdbWrite "+fmt.Sprintf("Could not print PDB line: %d", i))
}
_, err := out.Write([]byte(outline))
if err != nil {
return iowriteError(err)
}
}
_, err = out.Write([]byte("END")) //no newline, this is in case the write is part of a PDB and one needs to write "ENDMODEL".
if err != nil {
return iowriteError(err)
}
return nil
}
//ScaleBond takes a C-H bond and moves the H (in place) so the distance between them is the one given (bond).
//CAUTION: I have only tested it for the case where the original distance>bond, although I expect it to also work in the other case.
func ScaleBond(C, H *v3.Matrix, bond float64) {
Odist := v3.Zeros(1)
Odist.Sub(H, C)
distance := Odist.Norm(0)
Odist.Scale((distance-bond)/distance, Odist)
H.Sub(H, Odist)
}
//Projection returns the projection of test in ref.
func Projection(test, ref *v3.Matrix) *v3.Matrix {
rr, _ := ref.Dims()
Uref := v3.Zeros(rr)
Uref.Unit(ref)
scalar := test.Dot(Uref) //math.Abs(la)*math.Cos(angle)
Uref.Scale(scalar, Uref)
return Uref
}
//BestPlaneP takes sorted evecs, according to the eval,s and returns a row vector that is normal to the
//Plane that best contains the molecule. Notice that the function can't possibly check
//that the vectors are sorted. The P at the end of the name is for Performance. If
//That is not an issue it is safer to use the BestPlane function that wraps this one.
func BestPlaneP(evecs *v3.Matrix) (*v3.Matrix, error) {
evr, evc := evecs.Dims()
if evr != 3 || evc != 3 {
return evecs, CError{"goChem: Eigenvectors matrix must be 3x3", []string{"BestPlaneP"}} //maybe this should be a panic
}
v1 := evecs.VecView(2)
v2 := evecs.VecView(1)
normal := v3.Zeros(1)
normal.Cross(v1, v2)
return normal, nil
}
func EncodeCoords(coords *v3.Matrix, enc *json.Encoder) *Error {
c := new(Coords)
t := make([]float64, 3, 3)
for i := 0; i < coords.NVecs(); i++ {
c.Coords = coords.Row(t, i)
if err := enc.Encode(c); err != nil {
return NewError("postprocess", "chemjson.EncodeCoords", err)
}
}
return nil
}
//SelCone, Given a set of cartesian points in sellist, obtains a vector "plane" normal to the best plane passing through the points.
//It selects atoms from the set A that are inside a cone in the direction of "plane" that starts from the geometric center of the cartesian points,
//and has an angle of angle (radians), up to a distance distance. The cone is approximated by a set of radius-increasing cilinders with height thickness.
//If one starts from one given point, 2 cgnOnes, one in each direction, are possible. If whatcone is 0, both cgnOnes are considered.
//if whatcone<0, only the cone opposite to the plane vector direction. If whatcone>0, only the cone in the plane vector direction.
//the 'initial' argument allows the construction of a truncate cone with a radius of initial.
func SelCone(B, selection *v3.Matrix, angle, distance, thickness, initial float64, whatcone int) []int {
A := v3.Zeros(B.NVecs())
A.Copy(B) //We will be altering the input so its better to work with a copy.
ar, _ := A.Dims()
selected := make([]int, 0, 3)
neverselected := make([]int, 0, 30000) //waters that are too far to ever be selected
nevercutoff := distance / math.Cos(angle) //cutoff to be added to neverselected
A, _, err := MassCenter(A, selection, nil) //Centrate A in the geometric center of the selection, Its easier for the following calculations
if err != nil {
panic(PanicMsg(err.Error()))
}
selection, _, _ = MassCenter(selection, selection, nil) //Centrate the selection as well
plane, err := BestPlane(selection, nil) //I have NO idea which direction will this vector point. We might need its negative.
if err != nil {
panic(PanicMsg(err.Error()))
}
for i := thickness / 2; i <= distance; i += thickness {
maxdist := math.Tan(angle)*i + initial //this should give me the radius of the cone at this point
for j := 0; j < ar; j++ {
if isInInt(selected, j) || isInInt(neverselected, j) { //we dont scan things that we have already selected, or are too far
continue
}
atom := A.VecView(j)
proj := Projection(atom, plane)
norm := proj.Norm(0)
//Now at what side of the plane is the atom?
angle := Angle(atom, plane)
if whatcone > 0 {
if angle > math.Pi/2 {
continue
}
} else if whatcone < 0 {
if angle < math.Pi/2 {
continue
}
}
if norm > i+(thickness/2.0) || norm < (i-thickness/2.0) {
continue
}
proj.Sub(proj, atom)
projnorm := proj.Norm(0)
if projnorm <= maxdist {
selected = append(selected, j)
}
if projnorm >= nevercutoff {
neverselected = append(neverselected, j)
}
}
}
return selected
}
//ScaleBonds scales all bonds between atoms in the same residue with names n1, n2 to a final lenght finallengt, by moving the atoms n2.
//the operation is executed in place.
func ScaleBonds(coords *v3.Matrix, mol Atomer, n1, n2 string, finallenght float64) {
for i := 0; i < mol.Len(); i++ {
c1 := mol.Atom(i)
if c1.Name != n1 {
continue
}
for j := 0; j < mol.Len(); j++ {
c2 := mol.Atom(j)
if c1.MolID == c2.MolID && c1.Name == n1 && c2.Name == n2 {
A := coords.VecView(i)
B := coords.VecView(j)
ScaleBond(A, B, finallenght)
}
}
}
}
//XYZStringWrite writes the mol Ref and the Coord coordinates in an XYZ-formatted string.
func XYZStringWrite(Coords *v3.Matrix, mol Atomer) (string, error) {
var out string
if mol.Len() != Coords.NVecs() {
return "", CError{"Ref and Coords dont have the same number of atoms", []string{"XYZStringWrite"}}
}
c := make([]float64, 3, 3)
out = fmt.Sprintf("%-4d\n\n", mol.Len())
//towrite := Coords.Arrays() //An array of array with the data in the matrix
for i := 0; i < mol.Len(); i++ {
//c := towrite[i] //coordinates for the corresponding atoms
c = Coords.Row(c, i)
temp := fmt.Sprintf("%-2s %12.6f%12.6f%12.6f \n", mol.Atom(i).Symbol, c[0], c[1], c[2])
out = strings.Join([]string{out, temp}, "")
}
return out, nil
}
//CenterOfMass returns the center of mass the atoms represented by the coordinates in geometry
//and the masses in mass, and an error. If mass is nil, it calculates the geometric center
func CenterOfMass(geometry *v3.Matrix, mass *mat64.Dense) (*v3.Matrix, error) {
if geometry == nil {
return nil, CError{"goChem: nil matrix to get the center of mass", []string{"CenterOfMass"}}
}
gr, _ := geometry.Dims()
if mass == nil { //just obtain the geometric center
tmp := ones(gr)
mass = mat64.NewDense(gr, 1, tmp) //gnOnes(gr, 1)
}
tmp2 := ones(gr)
gnOnesvector := mat64.NewDense(1, gr, tmp2) //gnOnes(1, gr)
ref := v3.Zeros(gr)
ref.ScaleByCol(geometry, mass)
ref2 := v3.Zeros(1)
ref2.Mul(gnOnesvector, ref)
ref2.Scale(1.0/mass.Sum(), ref2)
return ref2, nil
}
//Super determines the best rotation and translations to superimpose the coords in test
//listed in testlst on te atoms of molecule templa, frame frametempla, listed in templalst.
//It applies those rotation and translations to the whole frame frametest of molecule test, in palce.
//testlst and templalst must have the same number of elements. If any of the two slices, or both, are
//nil or have a zero lenght, they will be replaced by a list containing the number of all atoms in the
//corresponding molecule.
func Super(test, templa *v3.Matrix, testlst, templalst []int) (*v3.Matrix, error) {
//_, testcols := test.Dims()
//_, templacols := templa.Dims()
structs := []*v3.Matrix{test, templa}
lists := [][]int{testlst, templalst}
//In case one or both lists are nil or have lenght zero.
for k, v := range lists {
if v == nil || len(v) == 0 {
lists[k] = make([]int, structs[k].NVecs(), structs[k].NVecs())
for k2, _ := range lists[k] {
lists[k][k2] = k2
}
}
}
//fmt.Println(lists[0])
if len(lists[0]) != len(lists[1]) {
return nil, CError{fmt.Sprintf("Mismatched template and test atom numbers: %d, %d", len(lists[1]), len(lists[0])), []string{"Super"}}
}
ctest := v3.Zeros(len(lists[0]))
ctest.SomeVecs(test, lists[0])
ctempla := v3.Zeros(len(lists[1]))
ctempla.SomeVecs(templa, lists[1])
_, rotation, trans1, trans2, err1 := RotatorTranslatorToSuper(ctest, ctempla)
if err1 != nil {
return nil, errDecorate(err1, "Super")
}
test.AddVec(test, trans1)
// fmt.Println("test1",test, rotation) /////////////77
test.Mul(test, rotation)
// fmt.Println("test2",test) ///////////
test.AddVec(test, trans2)
// fmt.Println("test3",test) ///////
return test, nil
}
//writePDBLine writes a line in PDB format from the data passed as a parameters. It takes the chain of the previous atom
//and returns the written line, the chain of the just-written atom, and error or nil.
func writePDBLine(atom *Atom, coord *v3.Matrix, bfact float64, chainprev string) (string, string, error) {
var ter string
var out string
if atom.Chain != chainprev {
ter = fmt.Sprint(out, "TER\n")
chainprev = atom.Chain
}
first := "ATOM"
if atom.Het {
first = "HETATM"
}
formatstring := "%-6s%5d %-3s %-4s%1s%4d %8.3f%8.3f%8.3f%6.2f%6.2f %2s \n"
//4 chars for the atom name are used when hydrogens are included.
//This has not been tested
if len(atom.Name) == 4 {
formatstring = strings.Replace(formatstring, "%-3s ", "%-4s", 1)
} else if len(atom.Name) > 4 {
return "", chainprev, CError{"Cant print PDB line", []string{"writePDBLine"}}
}
//"%-6s%5d %-3s %3s %1c%4d %8.3f%8.3f%8.3f%6.2f%6.2f %2s \n"
out = fmt.Sprintf(formatstring, first, atom.ID, atom.Name, atom.Molname, atom.Chain,
atom.MolID, coord.At(0, 0), coord.At(0, 1), coord.At(0, 2), atom.Occupancy, bfact, atom.Symbol)
out = strings.Join([]string{ter, out}, "")
return out, chainprev, nil
}
//EulerRotateAbout uses Euler angles to rotate the coordinates in coordsorig around by angle
//radians around the axis given by the vector axis. It returns the rotated coordsorig,
//since the original is not affected. It seems more clunky than the RotateAbout, which uses Clifford algebra.
//I leave it for benchmark, mostly, and might remove it later. There is no test for this function!
func EulerRotateAbout(coordsorig, ax1, ax2 *v3.Matrix, angle float64) (*v3.Matrix, error) {
r, _ := coordsorig.Dims()
coords := v3.Zeros(r)
translation := v3.Zeros(ax1.NVecs())
translation.Copy(ax1)
axis := v3.Zeros(ax2.NVecs())
axis.Sub(ax2, ax1) //now it became the rotation axis
f := func() { coords.SubVec(coordsorig, translation) }
if err := gnMaybe(gnPanicker(f)); err != nil {
return nil, CError{err.Error(), []string{"v3.Matrix.Subvec", "EulerRotateAbout"}}
}
Zswitch := RotatorToNewZ(axis)
coords.Mul(coords, Zswitch) //rotated
Zrot, err := RotatorAroundZ(angle)
if err != nil {
return nil, errDecorate(err, "EulerRotateAbout")
}
// Zsr, _ := Zswitch.Dims()
// RevZ := v3.Zeros(Zsr)
RevZ, err := gnInverse(Zswitch)
if err != nil {
return nil, errDecorate(err, "EulerRotateAbout")
}
coords.Mul(coords, Zrot) //rotated
coords.Mul(coords, RevZ)
coords.AddVec(coords, translation)
return coords, nil
}
//XYZStringWrite writes the mol Ref and the Coord coordinates in an XYZ-formatted string.
func XYZWrite(out io.Writer, Coords *v3.Matrix, mol Atomer) error {
iowriterError := func(err error) error {
return CError{"Failed to write in io.Writer" + err.Error(), []string{"io.Writer.Write", "XYZWrite"}}
}
if mol.Len() != Coords.NVecs() {
return CError{"Ref and Coords dont have the same number of atoms", []string{"XYZWrite"}}
}
c := make([]float64, 3, 3)
_, err := out.Write([]byte(fmt.Sprintf("%-4d\n\n", mol.Len())))
if err != nil {
return iowriterError(err)
}
//towrite := Coords.Arrays() //An array of array with the data in the matrix
for i := 0; i < mol.Len(); i++ {
//c := towrite[i] //coordinates for the corresponding atoms
c = Coords.Row(c, i)
temp := fmt.Sprintf("%-2s %12.6f%12.6f%12.6f \n", mol.Atom(i).Symbol, c[0], c[1], c[2])
_, err := out.Write([]byte(temp))
if err != nil {
return iowriterError(err)
}
}
return nil
}
//AntiProjection returns a vector in the direction of ref with the magnitude of
//a vector A would have if |test| was the magnitude of its projection
//in the direction of test.
func AntiProjection(test, ref *v3.Matrix) *v3.Matrix {
rr, _ := ref.Dims()
testnorm := test.Norm(0)
Uref := v3.Zeros(rr)
Uref.Unit(ref)
scalar := test.Dot(Uref)
scalar = (testnorm * testnorm) / scalar
Uref.Scale(scalar, Uref)
return Uref
}
//Angle takes 2 vectors and calculate the angle in radians between them
//It does not check for correctness or return errors!
func Angle(v1, v2 *v3.Matrix) float64 {
normproduct := v1.Norm(0) * v2.Norm(0)
dotprod := v1.Dot(v2)
argument := dotprod / normproduct
//Take care of floating point math errors
if math.Abs(argument-1) <= appzero {
argument = 1
} else if math.Abs(argument+1) <= appzero {
argument = -1
}
//fmt.Println(dotprod/normproduct,argument) //dotprod/normproduct, dotprod, normproduct,v1.TwoNorm(),v2.TwoNorm())
angle := math.Acos(argument)
if math.Abs(angle) <= appzero {
return 0.00
}
return angle
}
//RMSD returns the RSMD (root of the mean square deviation) for the sets of cartesian
//coordinates in test and template.
func RMSD(test, template *v3.Matrix) (float64, error) {
//This is a VERY naive implementation.
tmr, tmc := template.Dims()
tsr, tsc := test.Dims()
if tmr != tsr || tmc != 3 || tsc != 3 {
return 0, fmt.Errorf("Ill formed matrices for RMSD calculation")
}
tr := tmr
ctempla := v3.Zeros(template.NVecs())
ctempla.Copy(template)
//the maybe thing might not be needed since we check the dimensions before.
f := func() { ctempla.Sub(ctempla, test) }
if err := gnMaybe(gnPanicker(f)); err != nil {
return 0, CError{err.Error(), []string{"v3.Matrix.Sub", "RMSD"}}
}
var RMSD float64
for i := 0; i < template.NVecs(); i++ {
temp := ctempla.VecView(i)
RMSD += math.Pow(temp.Norm(0), 2)
}
RMSD = RMSD / float64(tr)
RMSD = math.Sqrt(RMSD)
return RMSD, nil
}
//RotatorToNewY takes a set of coordinates (mol) and a vector (y). It returns
//a rotation matrix that, when applied to mol, will rotate it around the Z axis
//in such a way that the projection of newy in the XY plane will be aligned with
//the Y axis.
func RotatorAroundZToNewY(newy *v3.Matrix) (*v3.Matrix, error) {
nr, nc := newy.Dims()
if nc != 3 || nr != 1 {
return nil, CError{"Wrong newy vector", []string{"RotatorAroundZtoNewY"}}
}
if nc != 3 {
return nil, CError{"Wrong mol vector", []string{"RotatorAroundZtoNewY"}} //this one doesn't seem reachable
}
gamma := math.Atan2(newy.At(0, 0), newy.At(0, 1))
singamma := math.Sin(gamma)
cosgamma := math.Cos(gamma)
operator := []float64{cosgamma, singamma, 0,
-singamma, cosgamma, 0,
0, 0, 1}
return v3.NewMatrix(operator)
}
//RotateAbout about rotates the coordinates in coordsorig around by angle radians around the axis
//given by the vector axis. It returns the rotated coordsorig, since the original is not affected.
//Uses Clifford algebra.
func RotateAbout(coordsorig, ax1, ax2 *v3.Matrix, angle float64) (*v3.Matrix, error) {
coordsLen := coordsorig.NVecs()
coords := v3.Zeros(coordsLen)
translation := v3.Zeros(ax1.NVecs())
translation.Copy(ax1)
axis := v3.Zeros(ax2.NVecs())
axis.Sub(ax2, ax1) // the rotation axis
f := func() { coords.SubVec(coordsorig, translation) }
if err := gnMaybe(gnPanicker(f)); err != nil {
return nil, CError{err.Error(), []string{"v3.Matrix.SubVec", "RotateAbout"}}
}
Rot := v3.Zeros(coordsLen)
Rot = Rotate(coords, Rot, axis, angle)
g := func() { Rot.AddVec(Rot, translation) }
if err := gnMaybe(gnPanicker(g)); err != nil {
return nil, CError{err.Error(), []string{"v3.Matrix.AddVec", "RotateAbout"}}
}
return Rot, nil
}
// RamaCalc Obtains the values for the phi and psi dihedrals indicated in []Ramaset, for the
// structure M. It returns a slice of 2-element slices, one for the phi the next for the psi
// dihedral, a and an error or nil.
func RamaCalc(M *v3.Matrix, dihedrals []RamaSet) ([][]float64, error) {
if M == nil || dihedrals == nil {
return nil, Error{ErrNilData, "", "RamaCalc", "", true}
}
r, _ := M.Dims()
Rama := make([][]float64, 0, len(dihedrals))
for _, j := range dihedrals {
if j.Npost >= r {
return nil, Error{ErrOutOfRange, "", "RamaCalc", "", true}
}
Cprev := M.VecView(j.Cprev)
N := M.VecView(j.N)
Ca := M.VecView(j.Ca)
C := M.VecView(j.C)
Npost := M.VecView(j.Npost)
phi := chem.Dihedral(Cprev, N, Ca, C)
psi := chem.Dihedral(N, Ca, C, Npost)
temp := []float64{phi * (180 / math.Pi), psi * (180 / math.Pi)}
Rama = append(Rama, temp)
}
return Rama, nil
}
func main() {
//This is the part that collects all the data from PyMOL, with all the proper error checking.
stdin := bufio.NewReader(os.Stdin)
options, err := chemjson.DecodeOptions(stdin)
if err != nil {
fmt.Fprint(os.Stderr, err.Marshal())
log.Fatal(err)
}
mainName := options.SelNames[0]
if len(options.AtomsPerSel) > 1 {
for _, v := range options.SelNames[1:] {
mainName = mainName + "__" + v //inefficient but there should never be THAT many selections.
}
}
dielectric := options.FloatOptions[0][0]
charge := options.IntOptions[0][0]
multi := options.IntOptions[0][1]
qmprogram := options.StringOptions[0][0]
method := options.StringOptions[0][1]
calctype := options.StringOptions[0][2]
var osidemol *chem.Topology
var osidecoords, sidecoords *v3.Matrix
var sidelist, sidefrozen []int
selindex := 0
total := 0
selections := len(options.AtomsPerSel)
if options.BoolOptions[0][0] { //sidechain selections exist
sidecoords, osidecoords, osidemol, sidelist, sidefrozen = SideChains(stdin, options)
selections--
total += osidemol.Len()
selindex++
}
fmt.Fprint(os.Stderr, selections)
obbmol := make([]*chem.Topology, selections, selections)
obbcoords := make([]*v3.Matrix, selections, selections)
bbcoords := make([]*v3.Matrix, selections, selections)
bblist := make([][]int, selections, selections)
bbfrozen := make([][]int, selections, selections)
for i := 0; i < selections; i++ {
bbcoords[i], obbcoords[i], obbmol[i], bblist[i], bbfrozen[i] = BackBone(stdin, options, selindex)
total += obbmol[i].Len()
selindex++
fmt.Fprint(os.Stderr, "chetumanga")
}
//Now we put the juit together
bigC := v3.Zeros(total)
bigA := chem.NewTopology([]*chem.Atom{}, 0, 0)
bigFroz := make([]int, 0, total)
setoffset := 0
if options.BoolOptions[0][0] {
bigC.SetMatrix(0, 0, osidecoords)
setoffset += osidecoords.NVecs()
bigA = chem.MergeAtomers(bigA, osidemol)
// bigA = osidemol
bigFroz = append(bigFroz, sidefrozen...)
}
for k, v := range obbcoords {
bigC.SetMatrix(setoffset, 0, v)
bigA = chem.MergeAtomers(bigA, obbmol[k])
tmpfroz := SliceOffset(bbfrozen[k], setoffset)
bigFroz = append(bigFroz, tmpfroz...)
setoffset += v.NVecs()
}
bigA.SetCharge(charge)
bigA.SetMulti(multi)
chem.PDBFileWrite(mainName+"toOPT.pdb", bigC, bigA, nil) /////////////////////////////////////
chem.XYZFileWrite(mainName+"toOPT.xyz", bigC, bigA) /////////////////////////////////////
//Ok, we have now one big matrix and one big atom set, now the optimization
calc := new(qm.Calc)
if calctype == "Optimization" {
calc.Optimize = true
}
calc.RI = true //some options, including this one, are meaningless for MOPAC
calc.CConstraints = bigFroz
calc.Dielectric = dielectric
calc.SCFTightness = 1
calc.Dispersion = "D3"
calc.Method = "TPSS"
if method == "Cheap" {
calc.BSSE = "gcp"
if qmprogram == "ORCA" {
calc.Method = "HF-3c"
calc.RI = false
} else if qmprogram == "MOPAC2012" {
calc.Method = "PM6-D3H4 NOMM MOZYME"
} else {
calc.Basis = "def2-SVP"
}
} else {
calc.Basis = "def2-TZVP"
}
//We will use the default methods and basis sets of each program. In the case of MOPAC, that is currently PM6-D3H4.
var QM qm.Handle
switch qmprogram {
case "ORCA":
orca := qm.NewOrcaHandle()
orca.SetnCPU(runtime.NumCPU())
QM = qm.Handle(orca)
case "TURBOMOLE":
QM = qm.Handle(qm.NewTMHandle())
case "NWCHEM":
QM = qm.Handle(qm.NewNWChemHandle())
calc.SCFConvHelp = 1
default:
QM = qm.Handle(qm.NewMopacHandle())
}
QM.SetName(mainName)
QM.BuildInput(bigC, bigA, calc)
fmt.Fprint(os.Stderr, options.BoolOptions)
if options.BoolOptions[0][2] {
return //Dry run
}
if err2 := QM.Run(true); err != nil {
log.Fatal(err2.Error())
}
//Now we ran the calculation, we must retrive the geometry and divide the coordinates among the original selections.
var newBigC *v3.Matrix
info := new(chemjson.Info) //Contains the return info
var err2 error
if calc.Optimize {
newBigC, err2 = QM.OptimizedGeometry(bigA)
if err2 != nil {
log.Fatal(err2.Error())
}
if qmprogram == "NWCHEM" { //NWchem translates/rotates the system before optimizing so we need to superimpose with the original geometry in order for them to match.
newBigC, err2 = chem.Super(newBigC, bigC, bigFroz, bigFroz)
if err2 != nil {
log.Fatal(err2.Error())
}
}
info.Molecules = len(options.AtomsPerSel)
geooffset := 0
if options.BoolOptions[0][0] {
tmp := newBigC.View(geooffset, 0, len(sidelist), 3) //This is likely to change when we agree on a change for the gonum API!!!!
sidecoords.SetVecs(tmp, sidelist)
info.FramesPerMolecule = []int{1}
info.AtomsPerMolecule = []int{sidecoords.NVecs()}
//I DO NOT understand why the next line is += len(sidelist)-1 instead of len(sidelist), but it works. If a bug appears
//take a look at this line, and the equivalent in the for loop that follows.
geooffset += (len(sidelist) - 1)
}
for k, v := range bbcoords {
//Take a look here in case of bugs.
tmp := newBigC.View(geooffset, 0, len(bblist[k]), 3) //This is likely to change when we agree on a change for the gonum API!!!!
v.SetVecs(tmp, bblist[k])
info.FramesPerMolecule = append(info.FramesPerMolecule, 1)
info.AtomsPerMolecule = append(info.AtomsPerMolecule, v.NVecs())
geooffset += (len(bblist[k]) - 1)
}
// for k,v:=range(bbcoords){
// chem.XYZWrite(fmt.Sprintf("opti%d.xyz",k), , newcoords)
// }
} else {
//nothing here, the else part will get deleted after tests
}
energy, err2 := QM.Energy()
if err2 != nil {
log.Fatal(err2.Error())
}
//Start transfering data back
info.Energies = []float64{energy}
if err2 := info.Send(os.Stdout); err2 != nil {
fmt.Fprint(os.Stderr, err2)
log.Fatal(err2)
}
// fmt.Fprint(os.Stdout,mar)
// fmt.Fprint(os.Stdout,"\n")
// A loop again to transmit the info.
if options.BoolOptions[0][0] {
if err := chemjson.SendMolecule(nil, []*v3.Matrix{sidecoords}, nil, nil, os.Stdout); err2 != nil {
fmt.Fprint(os.Stderr, err)
log.Fatal(err)
}
}
for _, v := range bbcoords {
fmt.Fprintln(os.Stderr, "BB transmit!", v.NVecs())
if err := chemjson.SendMolecule(nil, []*v3.Matrix{v}, nil, nil, os.Stdout); err2 != nil {
fmt.Fprint(os.Stderr, err)
log.Fatal(err)
}
}
}
//BuildInput builds an input for NWChem based int the data in atoms, coords and C.
//returns only error.
func (O *NWChemHandle) BuildInput(coords *v3.Matrix, atoms chem.AtomMultiCharger, Q *Calc) error {
//Only error so far
if atoms == nil || coords == nil {
return Error{ErrMissingCharges, NWChem, O.inputname, "", []string{"BuildInput"}, true}
}
if Q.Basis == "" {
log.Printf("no basis set assigned for NWChem calculation, will use the default %s, \n", O.defbasis)
Q.Basis = O.defbasis
}
if Q.Method == "" {
log.Printf("no method assigned for NWChem calculation, will use the default %s, \n", O.defmethod)
Q.Method = O.defmethod
Q.RI = true
}
if O.inputname == "" {
O.inputname = "gochem"
}
//The initial guess
vectors := fmt.Sprintf("output %s.movecs", O.inputname) //The initial guess
switch Q.Guess {
case "":
case "hcore": //This option is not a great idea, apparently.
vectors = fmt.Sprintf("input hcore %s", vectors)
default:
if !Q.OldMO {
//If the user gives something in Q.Guess but DOES NOT want an old MO to be used, I assume he/she wants to put whatever
//is in Q.Guess directly in the vector keyword. If you want the default put an empty string in Q.Guess.
vectors = fmt.Sprintf("%s %s", Q.Guess, vectors)
break
}
//I assume the user gave a basis set name in Q.Guess which I can use to project vectors from a previous run.
moname := getOldMO(O.previousMO)
if moname == "" {
break
}
if strings.ToLower(Q.Guess) == strings.ToLower(Q.Basis) {
//Useful if you only change functionals.
vectors = fmt.Sprintf("input %s %s", moname, vectors)
} else {
//This will NOT work if one assigns different basis sets to different atoms.
vectors = fmt.Sprintf("input project %s %s %s", strings.ToLower(Q.Guess), moname, vectors)
}
}
vectors = "vectors " + vectors
disp, ok := nwchemDisp[Q.Dispersion]
if !ok {
disp = "vdw 3"
}
tightness := ""
switch Q.SCFTightness {
case 1:
tightness = "convergence energy 5.000000E-08\n convergence density 5.000000E-09\n convergence gradient 1E-05"
case 2:
//NO idea if this will work, or the criteria will be stronger than the criteria for the intergral evaluation
//and thus the SCF will never converge. Delete when properly tested.
tightness = "convergence energy 1.000000E-10\n convergence density 5.000000E-11\n convergence gradient 1E-07"
}
//For now, the only convergence help I trust is to run a little HF calculation before and use the orbitals as a guess.
//It works quite nicely. When the NWChem people get their shit together and fix the bugs with cgmin and RI and cgmin and
//COSMO, cgmin will be a great option also.
scfiters := "iterations 60"
prevscf := ""
if Q.SCFConvHelp > 0 {
scfiters = "iterations 200"
if Q.Guess == "" {
prevscf = fmt.Sprintf("\nbasis \"3-21g\"\n * library 3-21g\nend\nset \"ao basis\" 3-21g\nscf\n maxiter 200\n vectors output hf.movecs\n %s\nend\ntask scf energy\n\n", strings.ToLower(mopacMultiplicity[atoms.Multi()]))
vectors = fmt.Sprintf("vectors input project \"3-21g\" hf.movecs output %s.movecs", O.inputname)
}
}
grid, ok := nwchemGrid[Q.Grid]
if !ok {
grid = "medium"
}
if Q.SCFTightness > 0 { //We need this if we want the SCF to converge.
grid = "xfine"
}
grid = fmt.Sprintf("grid %s", grid)
var err error
//Only cartesian constraints supported by now.
constraints := ""
if len(Q.CConstraints) > 0 {
constraints = "constraints\n fix atom"
for _, v := range Q.CConstraints {
constraints = fmt.Sprintf("%s %d", constraints, v+1) //goChem numbering starts from 0, apparently NWChem starts from 1, hence the v+1
}
constraints = constraints + "\nend"
}
cosmo := ""
if Q.Dielectric > 0 {
//SmartCosmo in a single-point means that do_gasphase False is used, nothing fancy.
if Q.Job.Opti || O.smartCosmo {
cosmo = fmt.Sprintf("cosmo\n dielec %4.1f\n do_gasphase False\nend", Q.Dielectric)
} else {
cosmo = fmt.Sprintf("cosmo\n dielec %4.1f\n do_gasphase True\nend", Q.Dielectric)
}
}
memory := ""
if Q.Memory != 0 {
memory = fmt.Sprintf("memory total %d mb", Q.Memory)
}
m := strings.ToLower(Q.Method)
method, ok := nwchemMethods[m]
if !ok {
method = "xtpss03 ctpss03"
}
method = fmt.Sprintf("xc %s", method)
task := "dft energy"
driver := ""
preopt := ""
jc := jobChoose{}
jc.opti = func() {
eprec := "" //The available presition is set to default except if tighter SCF convergene criteria are being used.
if Q.SCFTightness > 0 {
eprec = " eprec 1E-7\n"
}
if Q.Dielectric > 0 && O.smartCosmo {
//If COSMO is used, and O.SmartCosmo is enabled, we start the optimization with a rather loose SCF (the default).
//and use that denisty as a starting point for the next calculation. The idea is to
//avoid the gas phase calculation in COSMO.
//This procedure doesn't seem to help at all, and just using do_gasphase False appears to be good enough in my tests.
preopt = fmt.Sprintf("cosmo\n dielec %4.1f\n do_gasphase True\nend\n", Q.Dielectric)
preopt = fmt.Sprintf("%sdft\n iterations 100\n %s\n %s\n print low\nend\ntask dft energy\n", preopt, vectors, method)
vectors = fmt.Sprintf("vectors input %s.movecs output %s.movecs", O.inputname, O.inputname) //We must modify the initial guess so we use the vectors we have just generated
}
//The NWCHem optimizer is horrible. To try to get something out of it we use this 3-step optimization scheme where we try to compensate for the lack of
//variable trust radius in nwchem.
task = "dft optimize"
//First an optimization with very loose convergency and the standard trust radius.
driver = fmt.Sprintf("driver\n maxiter 200\n%s trust 0.3\n gmax 0.0500\n grms 0.0300\n xmax 0.1800\n xrms 0.1200\n xyz %s_prev\nend\ntask dft optimize", eprec, O.inputname)
//Then a second optimization with a looser convergency and a 0.1 trust radius
driver = fmt.Sprintf("%s\ndriver\n maxiter 200\n%s trust 0.1\n gmax 0.009\n grms 0.001\n xmax 0.04 \n xrms 0.02\n xyz %s_prev2\nend\ntask dft optimize", driver, eprec, O.inputname)
//Then the final optimization with a small trust radius and the NWChem default convergence criteria.
driver = fmt.Sprintf("%s\ndriver\n maxiter 200\n%s trust 0.05\n xyz %s\nend\n", driver, eprec, O.inputname)
//Old criteria (ORCA): gmax 0.003\n grms 0.0001\n xmax 0.004 \n xrms 0.002\n
}
Q.Job.Do(jc)
//////////////////////////////////////////////////////////////
//Now lets write the thing. Ill process/write the basis later
//////////////////////////////////////////////////////////////
file, err := os.Create(fmt.Sprintf("%s.nw", O.inputname))
if err != nil {
return Error{err.Error(), NWChem, O.inputname, "", []string{"os.Create", "BuildInput"}, true}
}
defer file.Close()
start := "start"
if O.restart {
start = "restart"
}
_, err = fmt.Fprintf(file, "%s %s\n", start, O.inputname)
//after this check its assumed that the file is ok.
if err != nil {
return Error{err.Error(), NWChem, O.inputname, "", []string{"fmt.Fprintf", "BuildInput"}, true}
}
fmt.Fprint(file, "echo\n") //echo input in the output.
fmt.Fprintf(file, "charge %d\n", atoms.Charge())
if memory != "" {
fmt.Fprintf(file, "%s\n", memory) //the memory
}
//Now the geometry:
//If we have cartesian constraints we give the directive noautoz to optimize in cartesian coordinates.
autoz := ""
if len(Q.CConstraints) > 0 {
autoz = "noautoz"
}
fmt.Fprintf(file, "geometry units angstroms noautosym %s\n", autoz)
elements := make([]string, 0, 5) //I will collect the different elements that are in the molecule using the same loop as the geometry.
for i := 0; i < atoms.Len(); i++ {
symbol := atoms.Atom(i).Symbol
//In the following if/else I try to set up basis for specific atoms. Not SO sure it works.
if isInInt(Q.HBAtoms, i) {
symbol = symbol + "1"
} else if isInInt(Q.LBAtoms, i) {
symbol = symbol + "2"
}
fmt.Fprintf(file, " %-2s %8.3f%8.3f%8.3f \n", symbol, coords.At(i, 0), coords.At(i, 1), coords.At(i, 2))
if !isInString(elements, symbol) {
elements = append(elements, symbol)
}
}
fmt.Fprintf(file, "end\n")
fmt.Fprintf(file, prevscf) //The preeliminar SCF if exists.
//The basis. First the ao basis (required)
decap := strings.ToLower //hoping to make the next for loop less ugly
basis := make([]string, 1, 2)
basis[0] = "\"ao basis\""
fmt.Fprintf(file, "basis \"large\" spherical\n") //According to the manual this fails with COSMO. The calculations dont crash. Need to compare energies and geometries with Turbomole in order to be sure.
for _, el := range elements {
if isInString(Q.HBElements, el) || strings.HasSuffix(el, "1") {
fmt.Fprintf(file, " %-2s library %s\n", el, decap(Q.HighBasis))
} else if isInString(Q.LBElements, el) || strings.HasSuffix(el, "2") {
fmt.Fprintf(file, " %-2s library %s\n", el, decap(Q.LowBasis))
} else {
fmt.Fprintf(file, " %-2s library %s\n", el, decap(Q.Basis))
}
}
fmt.Fprintf(file, "end\n")
fmt.Fprintf(file, "set \"ao basis\" large\n")
//Only Ahlrichs basis are supported for RI. USE AHLRICHS BASIS, PERKELE! :-)
//The only Ahlrichs J basis in NWchem appear to be equivalent to def2-TZVPP/J (orca nomenclature). I suppose that they are still faster
//than not using RI if the main basis is SVP. One can also hope that they are good enough if the main basis is QZVPP or something.
//(about the last point, it appears that in Turbomole, the aux basis also go up to TZVPP).
//This comment is based on the H, Be and C basis.
if Q.RI {
fmt.Fprint(file, "basis \"cd basis\"\n * library \"Ahlrichs Coulomb Fitting\"\nend\n")
}
//Now the geometry constraints. I kind of assume they are
if constraints != "" {
fmt.Fprintf(file, "%s\n", constraints)
}
fmt.Fprintf(file, preopt)
if cosmo != "" {
fmt.Fprintf(file, "%s\n", cosmo)
}
//The DFT block
fmt.Fprint(file, "dft\n")
fmt.Fprintf(file, " %s\n", vectors)
fmt.Fprintf(file, " %s\n", scfiters)
if tightness != "" {
fmt.Fprintf(file, " %s\n", tightness)
}
fmt.Fprintf(file, " %s\n", grid)
fmt.Fprintf(file, " %s\n", method)
if disp != "" {
fmt.Fprintf(file, " disp %s\n", disp)
}
if Q.Job.Opti {
fmt.Fprintf(file, " print convergence\n")
}
//task part
fmt.Fprintf(file, " mult %d\n", atoms.Multi())
fmt.Fprint(file, "end\n")
fmt.Fprintf(file, "%s", driver)
fmt.Fprintf(file, "task %s\n", task)
return nil
}
//MakeWater Creates a water molecule at distance Angstroms from a2, in a direction that is angle radians from the axis defined by a1 and a2.
//Notice that the exact position of the water is not well defined when angle is not zero. One can always use the RotateAbout
//function to move the molecule to the desired location. If oxygen is true, the oxygen will be pointing to a2. Otherwise,
//one of the hydrogens will.
func MakeWater(a1, a2 *v3.Matrix, distance, angle float64, oxygen bool) *v3.Matrix {
water := v3.Zeros(3)
const WaterOHDist = 0.96
const WaterAngle = 52.25
const deg2rad = 0.0174533
w := water.VecView(0) //we first set the O coordinates
w.Copy(a2)
w.Sub(w, a1)
w.Unit(w)
dist := v3.Zeros(1)
dist.Sub(a1, a2)
a1a2dist := dist.Norm(0)
fmt.Println("ala2dist", a1a2dist, distance) ////////////////7777
w.Scale(distance+a1a2dist, w)
w.Add(w, a1)
for i := 0; i <= 1; i++ {
o := water.VecView(0)
w = water.VecView(i + 1)
w.Copy(o)
fmt.Println("w1", w) ////////
w.Sub(w, a2)
fmt.Println("w12", w) ///////////////
w.Unit(w)
fmt.Println("w4", w)
w.Scale(WaterOHDist+distance, w)
fmt.Println("w3", w, WaterOHDist, distance)
o.Sub(o, a2)
t, _ := v3.NewMatrix([]float64{0, 0, 1})
upp := v3.Zeros(1)
upp.Cross(w, t)
fmt.Println("upp", upp, w, t)
upp.Add(upp, o)
upp.Add(upp, a2)
//water.SetMatrix(3,0,upp)
w.Add(w, a2)
o.Add(o, a2)
sign := 1.0
if i == 1 {
sign = -1.0
}
temp, _ := RotateAbout(w, o, upp, deg2rad*WaterAngle*sign)
w.SetMatrix(0, 0, temp)
}
var v1, v2 *v3.Matrix
if angle != 0 {
v1 = v3.Zeros(1)
v2 = v3.Zeros(1)
v1.Sub(a2, a1)
v2.Copy(v1)
v2.Set(0, 2, v2.At(0, 2)+1) //a "random" modification. The idea is that its not colinear with v1
v3 := cross(v1, v2)
v3.Add(v3, a2)
water, _ = RotateAbout(water, a2, v3, angle)
}
if oxygen {
return water
}
//we move things so an hydrogen points to a2 and modify the distance acordingly.
e1 := water.VecView(0)
e2 := water.VecView(1)
e3 := water.VecView(2)
if v1 == nil {
v1 = v3.Zeros(1)
}
if v2 == nil {
v2 = v3.Zeros(1)
}
v1.Sub(e2, e1)
v2.Sub(e3, e1)
axis := cross(v1, v2)
axis.Add(axis, e1)
water, _ = RotateAbout(water, e1, axis, deg2rad*(180-WaterAngle))
v1.Sub(e1, a2)
v1.Unit(v1)
v1.Scale(WaterOHDist, v1)
water.AddVec(water, v1)
return water
}
//RotatorToNewZ takes a matrix a row vector (newz).
//It returns a linear operator such that, when applied to a matrix mol ( with the operator on the right side)
//it will rotate mol such that the z axis is aligned with newz.
func RotatorToNewZ(newz *v3.Matrix) *v3.Matrix {
r, c := newz.Dims()
if c != 3 || r != 1 {
panic("Wrong newz vector")
}
normxy := math.Sqrt(math.Pow(newz.At(0, 0), 2) + math.Pow(newz.At(0, 1), 2))
theta := math.Atan2(normxy, newz.At(0, 2)) //Around the new y
phi := math.Atan2(newz.At(0, 1), newz.At(0, 0)) //First around z
psi := 0.000000000000 // second around z
sinphi := math.Sin(phi)
cosphi := math.Cos(phi)
sintheta := math.Sin(theta)
costheta := math.Cos(theta)
sinpsi := math.Sin(psi)
cospsi := math.Cos(psi)
operator := []float64{cosphi*costheta*cospsi - sinphi*sinpsi, -sinphi*cospsi - cosphi*costheta*sinpsi, cosphi * sintheta,
sinphi*costheta*cospsi + cosphi*sinpsi, -sinphi*costheta*sinpsi + cosphi*cospsi, sintheta * sinphi,
-sintheta * cospsi, sintheta * sinpsi, costheta}
finalop, _ := v3.NewMatrix(operator) //we are hardcoding opperator so it must have the right dimensions.
return finalop
}
//BuildInput builds an input for Fermions++ based int the data in atoms, coords and C.
//returns only error.
func (O *FermionsHandle) BuildInput(coords *v3.Matrix, atoms chem.AtomMultiCharger, Q *Calc) error {
//Only error so far
if atoms == nil || coords == nil {
return Error{ErrMissingCharges, Fermions, O.inputname, "", []string{"BuildInput"}, true}
}
if Q.Basis == "" {
log.Printf("no basis set assigned for Fermions++ calculation, will used the default %s, \n", O.defbasis)
Q.Basis = O.defbasis
}
if Q.Method == "" {
log.Printf("no method assigned for Fermions++ calculation, will used the default %s, \n", O.defmethod)
Q.Method = O.defmethod
}
disp, ok := fermionsDisp[strings.ToLower(Q.Dispersion)]
if !ok {
disp = "disp_corr D3"
}
grid, ok := fermionsGrid[Q.Grid]
if !ok {
grid = "M3"
}
grid = fmt.Sprintf("GRID_RAD_TYPE %s", grid)
var err error
m := strings.ToLower(Q.Method)
method, ok := fermionsMethods[m]
if !ok {
method = "EXC XC_GGA_X_PBE_R\n ECORR XC_GGA_C_PBE"
}
task := "SinglePoint"
dloptions := ""
jc := jobChoose{}
jc.opti = func() {
task = "DLF_OPTIMIZE"
dloptions = fmt.Sprintf("*start::dlfind\n JOB std\n method l-bfgs\n trust_radius energy\n dcd %s.dcd\n maxcycle 300\n maxene 200\n coord_type cartesian\n*end\n", O.inputname)
//Only cartesian constraints supported by now.
if len(Q.CConstraints) > 0 {
dloptions = fmt.Sprintf("%s\n*start::dlf_constraints\n", dloptions)
for _, v := range Q.CConstraints {
dloptions = fmt.Sprintf("%s cart %d\n", dloptions, v+1) //fortran numbering, starts with 1.
}
dloptions = fmt.Sprintf("%s*end\n", dloptions)
}
}
Q.Job.Do(jc)
cosmo := ""
if Q.Dielectric > 0 {
cosmo = fmt.Sprintf("*start::solvate\n pcm_model cpcm\n epsilon %f\n cavity_model bondi\n*end\n", Q.Dielectric)
}
//////////////////////////////////////////////////////////////
//Now lets write the thing.
//////////////////////////////////////////////////////////////
file, err := os.Create(fmt.Sprintf("%s.in", O.inputname))
if err != nil {
return Error{ErrCantInput, Fermions, O.inputname, err.Error(), []string{"os.Create", "BuildInput"}, true}
}
defer file.Close()
//Start with the geometry part (coords, charge and multiplicity)
fmt.Fprintf(file, "*start::geo\n")
fmt.Fprintf(file, "%d %d\n", atoms.Charge(), atoms.Multi())
for i := 0; i < atoms.Len(); i++ {
fmt.Fprintf(file, "%-2s %8.3f%8.3f%8.3f\n", atoms.Atom(i).Symbol, coords.At(i, 0), coords.At(i, 1), coords.At(i, 2))
}
fmt.Fprintf(file, "*end\n\n")
fmt.Fprintf(file, "*start::sys\n")
fmt.Fprintf(file, " TODO %s\n", task)
fmt.Fprintf(file, " BASIS %s\n PC pure\n", strings.ToLower(Q.Basis))
fmt.Fprintf(file, " %s\n", method)
fmt.Fprintf(file, " %s\n", grid)
fmt.Fprintf(file, " %s\n", disp)
fmt.Fprintf(file, " %s\n", O.gpu)
if !Q.Job.Opti {
fmt.Fprintf(file, " INFO 2\n")
}
fmt.Fprintf(file, "*end\n\n")
fmt.Fprintf(file, "%s\n", cosmo)
fmt.Fprintf(file, "%s\n", dloptions)
return nil
}