Esempio n. 1
0
/*
 * WriteToRabbit connects to the rabbitMQ queue defined in the config
 * (if it does not exit, it will error). Then it pushes to messages on that
 * queue whenever it gets a new one on the jobs channel.
 */
func (conn *Connection) WriteToRabbit(queueName string, jobs <-chan interface{}) {

	ch, err := conn.rabbitConnection.Channel()
	rabbitbeans.FailOnError(err, "Failed to open a channel")
	defer ch.Close() // Clean up by closing channel when function exits

	q, err := ch.QueueInspect( // Make sure queue exists - don't create one otherwise and err.
		queueName, // queue name
	)
	rabbitbeans.FailOnError(err, fmt.Sprintf("Failed to find queue named: %s", queueName))
	log.Printf("Connected to queue: %s", q.Name)

	if err := ch.Confirm(
		false, // noWait = false - means, please do wait for confirms
	); err != nil {
		rabbitbeans.FailOnError(err, "Could not set channel confirm mode on")
	}

	// Buffer of 1 for our single outstanding publishing
	confirms := ch.NotifyPublish(make(chan amqp.Confirmation, 1))

	log.Printf(" [*] Sending rabbits. To exit press CTRL+C")
	for j := range jobs {
		job, ok := j.(rabbitbeans.Job)
		if !ok {
			rabbitbeans.LogOnError(errors.New("Unreadable job on the channel"), "Skipping item")
			continue
		}
		if !conn.config.Quiet {
			log.Printf("Sending rabbit to queue: %s", string(job.Body))
		}
		err = ch.Publish(
			"",        // exchange
			queueName, // routing key
			false,     // mandatory
			false,     // immediate
			amqp.Publishing{
				ContentType: job.ContentType,
				Body:        job.Body,
			})
		if err != nil {
			job.Nack(job.Id)
		} else {
			// only ack the source delivery when the destination acks the publishing
			if confirmed := <-confirms; confirmed.Ack {
				job.Ack(job.Id)
			} else {
				job.Nack(job.Id)
			}
			rabbitbeans.FailOnError(err, fmt.Sprintf("Failed to find queue named: %s", queueName))
		}
	}
}
Esempio n. 2
0
/*
 * WriteToBeanstalkd puts jobs onto beanstalkd
 */
func (conn *Connection) WriteToBeanstalkd(jobs <-chan interface{}) {

	log.Printf(" [*] Publishing beans. To exit press CTRL+C")
	for j := range jobs {
		job, ok := j.(rabbitbeans.Job)
		if !ok {
			rabbitbeans.FailOnError(errors.New("Unknown message on channel"), "Can't put message on rabbit")
		}
		if !conn.config.Quiet {
			log.Printf("Received a bean to create: %s", job.Body)
		}
		id, err := conn.beansConnection.Put(
			job.Body,     //body
			job.Priority, //pri uint32
			job.Delay,    //delay
			job.TTR,      // TTR time to run -- is an integer number of seconds to allow a worker to run this job
		)
		rabbitbeans.LogOnError(err, fmt.Sprintf("Failed to put job on beanstalkd %s", job.Body))
		if err != nil {
			job.Nack(id)
		} else {
			job.Ack(id)
		}
		if !conn.config.Quiet {
			fmt.Println("Created job", id)
		}
	}
}
Esempio n. 3
0
/*
 * Creates a new Pipe that has access to Redis.
 */
func NewRedisPipe(redisPool pool.Pool) rabbitbeans.Pipe {
	client, err := redisPool.Get()
	if err != nil {
		// handle error
		rabbitbeans.FailOnError(err, "Cannot get redis connection from pool")
	}
	return RedisPipe{client}
}
Esempio n. 4
0
func (me *TestBeanHandler) WriteToBeanstalkd(c <-chan interface{}) {
	for n := 0; n < me.NumToProduce; n++ {
		m := <-c
		msg, ok := m.(rabbitbeans.Job)
		if !ok {
			rabbitbeans.FailOnError(errors.New("Unknown message on channel"), "Can't put job on beanstalkd")
		}
		msg.Ack(0)
	}
}
Esempio n. 5
0
/*
 * ReadFromRabbit connects to the rabbitMQ queue defined in the config
 * (if it does not exit, it will error). Then it listens to messages on that
 * queue and redirects then to the jobs channnel
 */
func (conn *Connection) ReadFromRabbit(queueName string, jobs chan<- interface{}) {

	ch, err := conn.rabbitConnection.Channel()
	rabbitbeans.FailOnError(err, "Failed to open a channel")
	defer ch.Close() // Clean up by closing channel when function exits

	q, err := ch.QueueInspect( // Make sure queue exists - don't create one otherwise and err.
		queueName, // queue name
	)
	rabbitbeans.FailOnError(err, fmt.Sprintf("Failed to find queue named: %s", queueName))
	log.Printf("Connected to queue: %s", queueName)

	msgs, err := ch.Consume(
		q.Name, // queue
		"",     // consumer
		false,  // auto-ack
		false,  // exclusive
		false,  // no-local
		false,  // no-wait
		nil,    // args
	)
	rabbitbeans.FailOnError(err, "Failed to register a consumer")

	log.Printf(" [*] Waiting for rabbits. To exit press CTRL+C")
	for d := range msgs {
		if !conn.config.Quiet {
			log.Printf("Received a rabbit from queue: %s", d.Body)
		}
		job := &rabbitbeans.Job{
			0,
			d.Body,
			//			d.Ack,
			//			d.Nack,
			RabbitAcknowledger{d},
			d.ContentType,
			uint32(d.Priority),
			0,
			time.Minute * 50, // TTR 50 minutes
			"",
		}
		jobs <- *job
	}
}
Esempio n. 6
0
func (me *TestRabbitHandler) WriteToRabbit(c <-chan interface{}) {
	for n := 0; n < me.NumToProduce; n++ {
		j := <-c
		job, ok := j.(rabbitbeans.Job)
		if !ok {
			rabbitbeans.FailOnError(errors.New("Unknown message on channel"), "Can't put message on rabbit")
		}
		job.Ack(job.Id)
	}
}
Esempio n. 7
0
/*
 * NewRedisPool creates a new pool of redis connections
 */
func NewRedisPool(config RedisConfig) *pool.Pool {
	initConfig(&config)
	log.Printf("Creating Redis pool with config: %v", config)
	p, err := pool.New(protocol, fmt.Sprintf("%s:%s", config.Host, config.Port), config.PoolSize)
	if err != nil {
		// fatal error
		rabbitbeans.FailOnError(err, "Cannot create redis pool")
	}

	return p
}
Esempio n. 8
0
/*
 * Dial connects to an amqp URL where it expects a rabbitMQ instance to be running.
 * Returns a multiplexable connection that can then be used to produce/consume on different queues
 */
func Dial(config Config) RabbitHandler {

	if config.AmqpUrl == "" {
		config.AmqpUrl = LocalhostAmqpUrl
	}

	conn, err := amqp.DialConfig(config.AmqpUrl, config.AmqpConfig)
	rabbitbeans.FailOnError(err, "Failed to connect to RabbitMQ")
	return &Connection{
		config,
		conn,
	}
}
Esempio n. 9
0
/*
 * ReadFromBeanstalkd reads jobs off of beanstalkd.
 */
func (conn *Connection) ReadFromBeanstalkd(jobs chan<- interface{}) {

	log.Printf(" [*] Consuming beans. To exit press CTRL+C")

	ticker := time.NewTicker(time.Duration(conn.config.TickInterval) * time.Second)
	go func() {
		for {
			select {
			case <-ticker.C:
				log.Printf("Polling beanstalkd for beans")
				var i = 0
				for {
					id, body, err := conn.beansConnection.Reserve(5 * time.Second)
					if cerr, ok := err.(beanstalk.ConnError); !ok {
						rabbitbeans.FailOnError(err, "expected connError")
					} else if cerr.Err != beanstalk.ErrTimeout {
						rabbitbeans.LogOnError(err, fmt.Sprintf("expected timeout on reserve %d", id))
						// Means the job deadline is real soon!! Reserve job anyways
					} else {
						break
					}
					if !conn.config.Quiet {
						log.Printf("Reserved job %v %s", id, body)
					}
					jobs <- rabbitbeans.Job{
						id,
						body,
						conn,
						"application/json",
						0,
						0,
						0,
						"",
					}
					i++
					if i == conn.config.BatchSize {
						break
					}
				}
				log.Printf("Processed %d jobs this tick", i)
			}
		}
	}()
}
Esempio n. 10
0
/*
 * Dial connects to a beanstalkd instance.
 * Returns a multiplexable connection that can then be used to put/reserve jobs.
 */
func Dial(config Config) BeanHandler {

	if config.Host == "" {
		config.Host = defaultHost
	}
	if config.Port == "" {
		config.Port = defaultPort
	}
	if config.TickInterval == 0 {
		config.TickInterval = defaultTickInterval
	}
	if config.BatchSize == 0 {
		config.BatchSize = defaultBatchSize
	}

	var connString = fmt.Sprintf("%s:%s", config.Host, config.Port)
	conn, err := beanstalk.Dial(protocol, connString)
	rabbitbeans.FailOnError(err, fmt.Sprintf("Failed to connect to Beanstalkd at: %s", connString))
	return &Connection{
		config,
		conn,
	}
}