// newReplicationManager configures a replication manager with the specified event recorder
func newReplicationManager(eventRecorder record.EventRecorder, podInformer cache.SharedIndexInformer, kubeClient clientset.Interface, resyncPeriod controller.ResyncPeriodFunc, burstReplicas int, lookupCacheSize int, garbageCollectorEnabled bool) *ReplicationManager {
if kubeClient != nil && kubeClient.Core().RESTClient().GetRateLimiter() != nil {
metrics.RegisterMetricAndTrackRateLimiterUsage("replication_controller", kubeClient.Core().RESTClient().GetRateLimiter())
}
rm := &ReplicationManager{
kubeClient: kubeClient,
podControl: controller.RealPodControl{
KubeClient: kubeClient,
Recorder: eventRecorder,
},
burstReplicas: burstReplicas,
expectations: controller.NewUIDTrackingControllerExpectations(controller.NewControllerExpectations()),
queue: workqueue.NewNamedRateLimitingQueue(workqueue.DefaultControllerRateLimiter(), "replicationmanager"),
garbageCollectorEnabled: garbageCollectorEnabled,
}
rm.rcStore.Indexer, rm.rcController = cache.NewIndexerInformer(
&cache.ListWatch{
ListFunc: func(options api.ListOptions) (runtime.Object, error) {
return rm.kubeClient.Core().ReplicationControllers(api.NamespaceAll).List(options)
},
WatchFunc: func(options api.ListOptions) (watch.Interface, error) {
return rm.kubeClient.Core().ReplicationControllers(api.NamespaceAll).Watch(options)
},
},
&api.ReplicationController{},
// TODO: Can we have much longer period here?
FullControllerResyncPeriod,
cache.ResourceEventHandlerFuncs{
AddFunc: rm.enqueueController,
UpdateFunc: rm.updateRC,
// This will enter the sync loop and no-op, because the controller has been deleted from the store.
// Note that deleting a controller immediately after scaling it to 0 will not work. The recommended
// way of achieving this is by performing a `stop` operation on the controller.
DeleteFunc: rm.enqueueController,
},
cache.Indexers{cache.NamespaceIndex: cache.MetaNamespaceIndexFunc},
)
podInformer.AddEventHandler(cache.ResourceEventHandlerFuncs{
AddFunc: rm.addPod,
// This invokes the rc for every pod change, eg: host assignment. Though this might seem like overkill
// the most frequent pod update is status, and the associated rc will only list from local storage, so
// it should be ok.
UpdateFunc: rm.updatePod,
DeleteFunc: rm.deletePod,
})
rm.podStore.Indexer = podInformer.GetIndexer()
rm.podController = podInformer.GetController()
rm.syncHandler = rm.syncReplicationController
rm.podStoreSynced = rm.podController.HasSynced
rm.lookupCache = controller.NewMatchingCache(lookupCacheSize)
return rm
}
// newReplicaSetController configures a replica set controller with the specified event recorder
func newReplicaSetController(eventRecorder record.EventRecorder, podInformer framework.SharedIndexInformer, kubeClient clientset.Interface, resyncPeriod controller.ResyncPeriodFunc, burstReplicas int, lookupCacheSize int, garbageCollectorEnabled bool) *ReplicaSetController {
if kubeClient != nil && kubeClient.Core().GetRESTClient().GetRateLimiter() != nil {
metrics.RegisterMetricAndTrackRateLimiterUsage("replicaset_controller", kubeClient.Core().GetRESTClient().GetRateLimiter())
}
rsc := &ReplicaSetController{
kubeClient: kubeClient,
podControl: controller.RealPodControl{
KubeClient: kubeClient,
Recorder: eventRecorder,
},
burstReplicas: burstReplicas,
expectations: controller.NewUIDTrackingControllerExpectations(controller.NewControllerExpectations()),
queue: workqueue.New(),
garbageCollectorEnabled: garbageCollectorEnabled,
}
rsc.rsStore.Store, rsc.rsController = framework.NewInformer(
&cache.ListWatch{
ListFunc: func(options api.ListOptions) (runtime.Object, error) {
return rsc.kubeClient.Extensions().ReplicaSets(api.NamespaceAll).List(options)
},
WatchFunc: func(options api.ListOptions) (watch.Interface, error) {
return rsc.kubeClient.Extensions().ReplicaSets(api.NamespaceAll).Watch(options)
},
},
&extensions.ReplicaSet{},
// TODO: Can we have much longer period here?
FullControllerResyncPeriod,
framework.ResourceEventHandlerFuncs{
AddFunc: rsc.enqueueReplicaSet,
UpdateFunc: rsc.updateRS,
// This will enter the sync loop and no-op, because the replica set has been deleted from the store.
// Note that deleting a replica set immediately after scaling it to 0 will not work. The recommended
// way of achieving this is by performing a `stop` operation on the replica set.
DeleteFunc: rsc.enqueueReplicaSet,
},
)
podInformer.AddEventHandler(framework.ResourceEventHandlerFuncs{
AddFunc: rsc.addPod,
// This invokes the ReplicaSet for every pod change, eg: host assignment. Though this might seem like
// overkill the most frequent pod update is status, and the associated ReplicaSet will only list from
// local storage, so it should be ok.
UpdateFunc: rsc.updatePod,
DeleteFunc: rsc.deletePod,
})
rsc.podStore.Indexer = podInformer.GetIndexer()
rsc.podController = podInformer.GetController()
rsc.syncHandler = rsc.syncReplicaSet
rsc.podStoreSynced = rsc.podController.HasSynced
rsc.lookupCache = controller.NewMatchingCache(lookupCacheSize)
return rsc
}
// NewReplicationManager configures a replication manager with the specified event recorder
func NewReplicationManager(podInformer, rcInformer cache.SharedIndexInformer, kubeClient clientset.Interface, burstReplicas int, lookupCacheSize int, garbageCollectorEnabled bool) *ReplicationManager {
if kubeClient != nil && kubeClient.Core().RESTClient().GetRateLimiter() != nil {
metrics.RegisterMetricAndTrackRateLimiterUsage("replication_controller", kubeClient.Core().RESTClient().GetRateLimiter())
}
eventBroadcaster := record.NewBroadcaster()
eventBroadcaster.StartLogging(glog.Infof)
eventBroadcaster.StartRecordingToSink(&v1core.EventSinkImpl{Interface: kubeClient.Core().Events("")})
rm := &ReplicationManager{
kubeClient: kubeClient,
podControl: controller.RealPodControl{
KubeClient: kubeClient,
Recorder: eventBroadcaster.NewRecorder(v1.EventSource{Component: "replication-controller"}),
},
burstReplicas: burstReplicas,
expectations: controller.NewUIDTrackingControllerExpectations(controller.NewControllerExpectations()),
queue: workqueue.NewNamedRateLimitingQueue(workqueue.DefaultControllerRateLimiter(), "replicationmanager"),
garbageCollectorEnabled: garbageCollectorEnabled,
}
rcInformer.AddEventHandler(cache.ResourceEventHandlerFuncs{
AddFunc: rm.enqueueController,
UpdateFunc: rm.updateRC,
// This will enter the sync loop and no-op, because the controller has been deleted from the store.
// Note that deleting a controller immediately after scaling it to 0 will not work. The recommended
// way of achieving this is by performing a `stop` operation on the controller.
DeleteFunc: rm.enqueueController,
})
podInformer.AddEventHandler(cache.ResourceEventHandlerFuncs{
AddFunc: rm.addPod,
// This invokes the rc for every pod change, eg: host assignment. Though this might seem like overkill
// the most frequent pod update is status, and the associated rc will only list from local storage, so
// it should be ok.
UpdateFunc: rm.updatePod,
DeleteFunc: rm.deletePod,
})
rm.syncHandler = rm.syncReplicationController
rm.rcLister.Indexer = rcInformer.GetIndexer()
rm.podLister.Indexer = podInformer.GetIndexer()
rm.podListerSynced = podInformer.HasSynced
rm.lookupCache = controller.NewMatchingCache(lookupCacheSize)
return rm
}
func NewDaemonSetsController(podInformer framework.SharedIndexInformer, kubeClient clientset.Interface, resyncPeriod controller.ResyncPeriodFunc, lookupCacheSize int) *DaemonSetsController {
eventBroadcaster := record.NewBroadcaster()
eventBroadcaster.StartLogging(glog.Infof)
// TODO: remove the wrapper when every clients have moved to use the clientset.
eventBroadcaster.StartRecordingToSink(&unversionedcore.EventSinkImpl{Interface: kubeClient.Core().Events("")})
if kubeClient != nil && kubeClient.Core().GetRESTClient().GetRateLimiter() != nil {
metrics.RegisterMetricAndTrackRateLimiterUsage("daemon_controller", kubeClient.Core().GetRESTClient().GetRateLimiter())
}
dsc := &DaemonSetsController{
kubeClient: kubeClient,
eventRecorder: eventBroadcaster.NewRecorder(api.EventSource{Component: "daemonset-controller"}),
podControl: controller.RealPodControl{
KubeClient: kubeClient,
Recorder: eventBroadcaster.NewRecorder(api.EventSource{Component: "daemon-set"}),
},
burstReplicas: BurstReplicas,
expectations: controller.NewControllerExpectations(),
queue: workqueue.New(),
}
// Manage addition/update of daemon sets.
dsc.dsStore.Store, dsc.dsController = framework.NewInformer(
&cache.ListWatch{
ListFunc: func(options api.ListOptions) (runtime.Object, error) {
return dsc.kubeClient.Extensions().DaemonSets(api.NamespaceAll).List(options)
},
WatchFunc: func(options api.ListOptions) (watch.Interface, error) {
return dsc.kubeClient.Extensions().DaemonSets(api.NamespaceAll).Watch(options)
},
},
&extensions.DaemonSet{},
// TODO: Can we have much longer period here?
FullDaemonSetResyncPeriod,
framework.ResourceEventHandlerFuncs{
AddFunc: func(obj interface{}) {
ds := obj.(*extensions.DaemonSet)
glog.V(4).Infof("Adding daemon set %s", ds.Name)
dsc.enqueueDaemonSet(ds)
},
UpdateFunc: func(old, cur interface{}) {
oldDS := old.(*extensions.DaemonSet)
curDS := cur.(*extensions.DaemonSet)
// We should invalidate the whole lookup cache if a DS's selector has been updated.
//
// Imagine that you have two RSs:
// * old DS1
// * new DS2
// You also have a pod that is attached to DS2 (because it doesn't match DS1 selector).
// Now imagine that you are changing DS1 selector so that it is now matching that pod,
// in such case we must invalidate the whole cache so that pod could be adopted by DS1
//
// This makes the lookup cache less helpful, but selector update does not happen often,
// so it's not a big problem
if !reflect.DeepEqual(oldDS.Spec.Selector, curDS.Spec.Selector) {
dsc.lookupCache.InvalidateAll()
}
glog.V(4).Infof("Updating daemon set %s", oldDS.Name)
dsc.enqueueDaemonSet(curDS)
},
DeleteFunc: dsc.deleteDaemonset,
},
)
// Watch for creation/deletion of pods. The reason we watch is that we don't want a daemon set to create/delete
// more pods until all the effects (expectations) of a daemon set's create/delete have been observed.
podInformer.AddEventHandler(framework.ResourceEventHandlerFuncs{
AddFunc: dsc.addPod,
UpdateFunc: dsc.updatePod,
DeleteFunc: dsc.deletePod,
})
dsc.podStore.Indexer = podInformer.GetIndexer()
dsc.podController = podInformer.GetController()
dsc.podStoreSynced = podInformer.HasSynced
// Watch for new nodes or updates to nodes - daemon pods are launched on new nodes, and possibly when labels on nodes change,
dsc.nodeStore.Store, dsc.nodeController = framework.NewInformer(
&cache.ListWatch{
ListFunc: func(options api.ListOptions) (runtime.Object, error) {
return dsc.kubeClient.Core().Nodes().List(options)
},
WatchFunc: func(options api.ListOptions) (watch.Interface, error) {
return dsc.kubeClient.Core().Nodes().Watch(options)
},
},
&api.Node{},
resyncPeriod(),
framework.ResourceEventHandlerFuncs{
AddFunc: dsc.addNode,
UpdateFunc: dsc.updateNode,
},
)
dsc.syncHandler = dsc.syncDaemonSet
dsc.lookupCache = controller.NewMatchingCache(lookupCacheSize)
return dsc
}
// NewReplicaSetController creates a new ReplicaSetController.
func NewReplicaSetController(kubeClient clientset.Interface, resyncPeriod controller.ResyncPeriodFunc, burstReplicas int, lookupCacheSize int) *ReplicaSetController {
eventBroadcaster := record.NewBroadcaster()
eventBroadcaster.StartLogging(glog.Infof)
eventBroadcaster.StartRecordingToSink(&unversionedcore.EventSinkImpl{Interface: kubeClient.Core().Events("")})
if kubeClient != nil && kubeClient.Core().GetRESTClient().GetRateLimiter() != nil {
metrics.RegisterMetricAndTrackRateLimiterUsage("replicaset_controller", kubeClient.Core().GetRESTClient().GetRateLimiter())
}
rsc := &ReplicaSetController{
kubeClient: kubeClient,
podControl: controller.RealPodControl{
KubeClient: kubeClient,
Recorder: eventBroadcaster.NewRecorder(api.EventSource{Component: "replicaset-controller"}),
},
burstReplicas: burstReplicas,
expectations: controller.NewUIDTrackingControllerExpectations(controller.NewControllerExpectations()),
queue: workqueue.New(),
}
rsc.rsStore.Store, rsc.rsController = framework.NewInformer(
&cache.ListWatch{
ListFunc: func(options api.ListOptions) (runtime.Object, error) {
return rsc.kubeClient.Extensions().ReplicaSets(api.NamespaceAll).List(options)
},
WatchFunc: func(options api.ListOptions) (watch.Interface, error) {
return rsc.kubeClient.Extensions().ReplicaSets(api.NamespaceAll).Watch(options)
},
},
&extensions.ReplicaSet{},
// TODO: Can we have much longer period here?
FullControllerResyncPeriod,
framework.ResourceEventHandlerFuncs{
AddFunc: rsc.enqueueReplicaSet,
UpdateFunc: func(old, cur interface{}) {
oldRS := old.(*extensions.ReplicaSet)
curRS := cur.(*extensions.ReplicaSet)
// We should invalidate the whole lookup cache if a RS's selector has been updated.
//
// Imagine that you have two RSs:
// * old RS1
// * new RS2
// You also have a pod that is attached to RS2 (because it doesn't match RS1 selector).
// Now imagine that you are changing RS1 selector so that it is now matching that pod,
// in such case we must invalidate the whole cache so that pod could be adopted by RS1
//
// This makes the lookup cache less helpful, but selector update does not happen often,
// so it's not a big problem
if !reflect.DeepEqual(oldRS.Spec.Selector, curRS.Spec.Selector) {
rsc.lookupCache.InvalidateAll()
}
// You might imagine that we only really need to enqueue the
// replica set when Spec changes, but it is safer to sync any
// time this function is triggered. That way a full informer
// resync can requeue any replica set that don't yet have pods
// but whose last attempts at creating a pod have failed (since
// we don't block on creation of pods) instead of those
// replica sets stalling indefinitely. Enqueueing every time
// does result in some spurious syncs (like when Status.Replica
// is updated and the watch notification from it retriggers
// this function), but in general extra resyncs shouldn't be
// that bad as ReplicaSets that haven't met expectations yet won't
// sync, and all the listing is done using local stores.
if oldRS.Status.Replicas != curRS.Status.Replicas {
glog.V(4).Infof("Observed updated replica count for ReplicaSet: %v, %d->%d", curRS.Name, oldRS.Status.Replicas, curRS.Status.Replicas)
}
rsc.enqueueReplicaSet(cur)
},
// This will enter the sync loop and no-op, because the replica set has been deleted from the store.
// Note that deleting a replica set immediately after scaling it to 0 will not work. The recommended
// way of achieving this is by performing a `stop` operation on the replica set.
DeleteFunc: rsc.enqueueReplicaSet,
},
)
rsc.podStore.Indexer, rsc.podController = framework.NewIndexerInformer(
&cache.ListWatch{
ListFunc: func(options api.ListOptions) (runtime.Object, error) {
return rsc.kubeClient.Core().Pods(api.NamespaceAll).List(options)
},
WatchFunc: func(options api.ListOptions) (watch.Interface, error) {
return rsc.kubeClient.Core().Pods(api.NamespaceAll).Watch(options)
},
},
&api.Pod{},
resyncPeriod(),
framework.ResourceEventHandlerFuncs{
AddFunc: rsc.addPod,
// This invokes the ReplicaSet for every pod change, eg: host assignment. Though this might seem like
// overkill the most frequent pod update is status, and the associated ReplicaSet will only list from
// local storage, so it should be ok.
UpdateFunc: rsc.updatePod,
DeleteFunc: rsc.deletePod,
},
cache.Indexers{cache.NamespaceIndex: cache.MetaNamespaceIndexFunc},
)
rsc.syncHandler = rsc.syncReplicaSet
rsc.podStoreSynced = rsc.podController.HasSynced
rsc.lookupCache = controller.NewMatchingCache(lookupCacheSize)
return rsc
}
// newReplicationManagerInternal configures a replication manager with the specified event recorder
func newReplicationManagerInternal(eventRecorder record.EventRecorder, podInformer framework.SharedIndexInformer, kubeClient clientset.Interface, resyncPeriod controller.ResyncPeriodFunc, burstReplicas int, lookupCacheSize int) *ReplicationManager {
if kubeClient != nil && kubeClient.Core().GetRESTClient().GetRateLimiter() != nil {
metrics.RegisterMetricAndTrackRateLimiterUsage("replication_controller", kubeClient.Core().GetRESTClient().GetRateLimiter())
}
rm := &ReplicationManager{
kubeClient: kubeClient,
podControl: controller.RealPodControl{
KubeClient: kubeClient,
Recorder: eventRecorder,
},
burstReplicas: burstReplicas,
expectations: controller.NewUIDTrackingControllerExpectations(controller.NewControllerExpectations()),
queue: workqueue.New(),
}
rm.rcStore.Indexer, rm.rcController = framework.NewIndexerInformer(
&cache.ListWatch{
ListFunc: func(options api.ListOptions) (runtime.Object, error) {
return rm.kubeClient.Core().ReplicationControllers(api.NamespaceAll).List(options)
},
WatchFunc: func(options api.ListOptions) (watch.Interface, error) {
return rm.kubeClient.Core().ReplicationControllers(api.NamespaceAll).Watch(options)
},
},
&api.ReplicationController{},
// TODO: Can we have much longer period here?
FullControllerResyncPeriod,
framework.ResourceEventHandlerFuncs{
AddFunc: rm.enqueueController,
UpdateFunc: func(old, cur interface{}) {
oldRC := old.(*api.ReplicationController)
curRC := cur.(*api.ReplicationController)
// We should invalidate the whole lookup cache if a RC's selector has been updated.
//
// Imagine that you have two RCs:
// * old RC1
// * new RC2
// You also have a pod that is attached to RC2 (because it doesn't match RC1 selector).
// Now imagine that you are changing RC1 selector so that it is now matching that pod,
// in such case, we must invalidate the whole cache so that pod could be adopted by RC1
//
// This makes the lookup cache less helpful, but selector update does not happen often,
// so it's not a big problem
if !reflect.DeepEqual(oldRC.Spec.Selector, curRC.Spec.Selector) {
rm.lookupCache.InvalidateAll()
}
// You might imagine that we only really need to enqueue the
// controller when Spec changes, but it is safer to sync any
// time this function is triggered. That way a full informer
// resync can requeue any controllers that don't yet have pods
// but whose last attempts at creating a pod have failed (since
// we don't block on creation of pods) instead of those
// controllers stalling indefinitely. Enqueueing every time
// does result in some spurious syncs (like when Status.Replica
// is updated and the watch notification from it retriggers
// this function), but in general extra resyncs shouldn't be
// that bad as rcs that haven't met expectations yet won't
// sync, and all the listing is done using local stores.
if oldRC.Status.Replicas != curRC.Status.Replicas {
glog.V(4).Infof("Observed updated replica count for rc: %v, %d->%d", curRC.Name, oldRC.Status.Replicas, curRC.Status.Replicas)
}
rm.enqueueController(cur)
},
// This will enter the sync loop and no-op, because the controller has been deleted from the store.
// Note that deleting a controller immediately after scaling it to 0 will not work. The recommended
// way of achieving this is by performing a `stop` operation on the controller.
DeleteFunc: rm.enqueueController,
},
cache.Indexers{cache.NamespaceIndex: cache.MetaNamespaceIndexFunc},
)
podInformer.AddEventHandler(framework.ResourceEventHandlerFuncs{
AddFunc: rm.addPod,
// This invokes the rc for every pod change, eg: host assignment. Though this might seem like overkill
// the most frequent pod update is status, and the associated rc will only list from local storage, so
// it should be ok.
UpdateFunc: rm.updatePod,
DeleteFunc: rm.deletePod,
})
rm.podStore.Indexer = podInformer.GetIndexer()
rm.podController = podInformer.GetController()
rm.syncHandler = rm.syncReplicationController
rm.podStoreSynced = rm.podController.HasSynced
rm.lookupCache = controller.NewMatchingCache(lookupCacheSize)
return rm
}
func NewDaemonSetsController(daemonSetInformer informers.DaemonSetInformer, podInformer informers.PodInformer, nodeInformer informers.NodeInformer, kubeClient clientset.Interface, lookupCacheSize int) *DaemonSetsController {
eventBroadcaster := record.NewBroadcaster()
eventBroadcaster.StartLogging(glog.Infof)
// TODO: remove the wrapper when every clients have moved to use the clientset.
eventBroadcaster.StartRecordingToSink(&v1core.EventSinkImpl{Interface: kubeClient.Core().Events("")})
if kubeClient != nil && kubeClient.Core().RESTClient().GetRateLimiter() != nil {
metrics.RegisterMetricAndTrackRateLimiterUsage("daemon_controller", kubeClient.Core().RESTClient().GetRateLimiter())
}
dsc := &DaemonSetsController{
kubeClient: kubeClient,
eventRecorder: eventBroadcaster.NewRecorder(v1.EventSource{Component: "daemonset-controller"}),
podControl: controller.RealPodControl{
KubeClient: kubeClient,
Recorder: eventBroadcaster.NewRecorder(v1.EventSource{Component: "daemon-set"}),
},
burstReplicas: BurstReplicas,
expectations: controller.NewControllerExpectations(),
queue: workqueue.NewNamedRateLimitingQueue(workqueue.DefaultControllerRateLimiter(), "daemonset"),
}
daemonSetInformer.Informer().AddEventHandler(cache.ResourceEventHandlerFuncs{
AddFunc: func(obj interface{}) {
ds := obj.(*extensions.DaemonSet)
glog.V(4).Infof("Adding daemon set %s", ds.Name)
dsc.enqueueDaemonSet(ds)
},
UpdateFunc: func(old, cur interface{}) {
oldDS := old.(*extensions.DaemonSet)
curDS := cur.(*extensions.DaemonSet)
// We should invalidate the whole lookup cache if a DS's selector has been updated.
//
// Imagine that you have two RSs:
// * old DS1
// * new DS2
// You also have a pod that is attached to DS2 (because it doesn't match DS1 selector).
// Now imagine that you are changing DS1 selector so that it is now matching that pod,
// in such case we must invalidate the whole cache so that pod could be adopted by DS1
//
// This makes the lookup cache less helpful, but selector update does not happen often,
// so it's not a big problem
if !reflect.DeepEqual(oldDS.Spec.Selector, curDS.Spec.Selector) {
dsc.lookupCache.InvalidateAll()
}
glog.V(4).Infof("Updating daemon set %s", oldDS.Name)
dsc.enqueueDaemonSet(curDS)
},
DeleteFunc: dsc.deleteDaemonset,
})
dsc.dsStore = daemonSetInformer.Lister()
dsc.dsStoreSynced = daemonSetInformer.Informer().HasSynced
// Watch for creation/deletion of pods. The reason we watch is that we don't want a daemon set to create/delete
// more pods until all the effects (expectations) of a daemon set's create/delete have been observed.
podInformer.Informer().AddEventHandler(cache.ResourceEventHandlerFuncs{
AddFunc: dsc.addPod,
UpdateFunc: dsc.updatePod,
DeleteFunc: dsc.deletePod,
})
dsc.podStore = podInformer.Lister()
dsc.podStoreSynced = podInformer.Informer().HasSynced
nodeInformer.Informer().AddEventHandler(cache.ResourceEventHandlerFuncs{
AddFunc: dsc.addNode,
UpdateFunc: dsc.updateNode,
},
)
dsc.nodeStoreSynced = nodeInformer.Informer().HasSynced
dsc.nodeStore = nodeInformer.Lister()
dsc.syncHandler = dsc.syncDaemonSet
dsc.lookupCache = controller.NewMatchingCache(lookupCacheSize)
return dsc
}