コード例 #1
0
ファイル: kill.go プロジェクト: hallyn/docker
// Kill forcefully terminates a container.
func (daemon *Daemon) Kill(container *container.Container) error {
	if !container.IsRunning() {
		return derr.ErrorCodeNotRunning.WithArgs(container.ID)
	}

	// 1. Send SIGKILL
	if err := daemon.killPossiblyDeadProcess(container, int(syscall.SIGKILL)); err != nil {
		// While normally we might "return err" here we're not going to
		// because if we can't stop the container by this point then
		// its probably because its already stopped. Meaning, between
		// the time of the IsRunning() call above and now it stopped.
		// Also, since the err return will be exec driver specific we can't
		// look for any particular (common) error that would indicate
		// that the process is already dead vs something else going wrong.
		// So, instead we'll give it up to 2 more seconds to complete and if
		// by that time the container is still running, then the error
		// we got is probably valid and so we return it to the caller.

		if container.IsRunning() {
			container.WaitStop(2 * time.Second)
			if container.IsRunning() {
				return err
			}
		}
	}

	// 2. Wait for the process to die, in last resort, try to kill the process directly
	if err := killProcessDirectly(container); err != nil {
		return err
	}

	container.WaitStop(-1 * time.Second)
	return nil
}
コード例 #2
0
ファイル: stop.go プロジェクト: hallyn/docker
// containerStop halts a container by sending a stop signal, waiting for the given
// duration in seconds, and then calling SIGKILL and waiting for the
// process to exit. If a negative duration is given, Stop will wait
// for the initial signal forever. If the container is not running Stop returns
// immediately.
func (daemon *Daemon) containerStop(container *container.Container, seconds int) error {
	if !container.IsRunning() {
		return nil
	}

	stopSignal := container.StopSignal()
	// 1. Send a stop signal
	if err := daemon.killPossiblyDeadProcess(container, stopSignal); err != nil {
		logrus.Infof("Failed to send signal %d to the process, force killing", stopSignal)
		if err := daemon.killPossiblyDeadProcess(container, 9); err != nil {
			return err
		}
	}

	// 2. Wait for the process to exit on its own
	if _, err := container.WaitStop(time.Duration(seconds) * time.Second); err != nil {
		logrus.Infof("Container %v failed to exit within %d seconds of signal %d - using the force", container.ID, seconds, stopSignal)
		// 3. If it doesn't, then send SIGKILL
		if err := daemon.Kill(container); err != nil {
			container.WaitStop(-1 * time.Second)
			logrus.Warn(err) // Don't return error because we only care that container is stopped, not what function stopped it
		}
	}

	daemon.LogContainerEvent(container, "stop")
	return nil
}
コード例 #3
0
ファイル: attach.go プロジェクト: contiv/docker
func (daemon *Daemon) containerAttach(container *container.Container, stdin io.ReadCloser, stdout, stderr io.Writer, logs, stream bool, keys []byte) error {
	if logs {
		logDriver, err := daemon.getLogger(container)
		if err != nil {
			return err
		}
		cLog, ok := logDriver.(logger.LogReader)
		if !ok {
			return logger.ErrReadLogsNotSupported
		}
		logs := cLog.ReadLogs(logger.ReadConfig{Tail: -1})

	LogLoop:
		for {
			select {
			case msg, ok := <-logs.Msg:
				if !ok {
					break LogLoop
				}
				if msg.Source == "stdout" && stdout != nil {
					stdout.Write(msg.Line)
				}
				if msg.Source == "stderr" && stderr != nil {
					stderr.Write(msg.Line)
				}
			case err := <-logs.Err:
				logrus.Errorf("Error streaming logs: %v", err)
				break LogLoop
			}
		}
	}

	daemon.LogContainerEvent(container, "attach")

	//stream
	if stream {
		var stdinPipe io.ReadCloser
		if stdin != nil {
			r, w := io.Pipe()
			go func() {
				defer w.Close()
				defer logrus.Debugf("Closing buffered stdin pipe")
				io.Copy(w, stdin)
			}()
			stdinPipe = r
		}
		<-container.Attach(stdinPipe, stdout, stderr, keys)
		// If we are in stdinonce mode, wait for the process to end
		// otherwise, simply return
		if container.Config.StdinOnce && !container.Config.Tty {
			container.WaitStop(-1 * time.Second)
		}
	}
	return nil
}
コード例 #4
0
ファイル: stop.go プロジェクト: docker/docker
// containerStop halts a container by sending a stop signal, waiting for the given
// duration in seconds, and then calling SIGKILL and waiting for the
// process to exit. If a negative duration is given, Stop will wait
// for the initial signal forever. If the container is not running Stop returns
// immediately.
func (daemon *Daemon) containerStop(container *container.Container, seconds int) error {
	if !container.IsRunning() {
		return nil
	}

	daemon.stopHealthchecks(container)

	stopSignal := container.StopSignal()
	// 1. Send a stop signal
	if err := daemon.killPossiblyDeadProcess(container, stopSignal); err != nil {
		// While normally we might "return err" here we're not going to
		// because if we can't stop the container by this point then
		// it's probably because it's already stopped. Meaning, between
		// the time of the IsRunning() call above and now it stopped.
		// Also, since the err return will be environment specific we can't
		// look for any particular (common) error that would indicate
		// that the process is already dead vs something else going wrong.
		// So, instead we'll give it up to 2 more seconds to complete and if
		// by that time the container is still running, then the error
		// we got is probably valid and so we force kill it.
		if _, err := container.WaitStop(2 * time.Second); err != nil {
			logrus.Infof("Container failed to stop after sending signal %d to the process, force killing", stopSignal)
			if err := daemon.killPossiblyDeadProcess(container, 9); err != nil {
				return err
			}
		}
	}

	// 2. Wait for the process to exit on its own
	if _, err := container.WaitStop(time.Duration(seconds) * time.Second); err != nil {
		logrus.Infof("Container %v failed to exit within %d seconds of signal %d - using the force", container.ID, seconds, stopSignal)
		// 3. If it doesn't, then send SIGKILL
		if err := daemon.Kill(container); err != nil {
			container.WaitStop(-1 * time.Second)
			logrus.Warn(err) // Don't return error because we only care that container is stopped, not what function stopped it
		}
	}

	daemon.LogContainerEvent(container, "stop")
	return nil
}
コード例 #5
0
ファイル: internals.go プロジェクト: jameseggers/docker
func (b *Builder) run(c *container.Container) error {
	var errCh chan error
	if b.Verbose {
		errCh = c.Attach(nil, b.Stdout, b.Stderr)
	}

	//start the container
	if err := b.docker.Start(c); err != nil {
		return err
	}

	finished := make(chan struct{})
	defer close(finished)
	go func() {
		select {
		case <-b.cancelled:
			logrus.Debugln("Build cancelled, killing and removing container:", c.ID)
			b.docker.Kill(c)
			b.removeContainer(c.ID)
		case <-finished:
		}
	}()

	if b.Verbose {
		// Block on reading output from container, stop on err or chan closed
		if err := <-errCh; err != nil {
			return err
		}
	}

	// Wait for it to finish
	if ret, _ := c.WaitStop(-1 * time.Second); ret != 0 {
		// TODO: change error type, because jsonmessage.JSONError assumes HTTP
		return &jsonmessage.JSONError{
			Message: fmt.Sprintf("The command '%s' returned a non-zero code: %d", b.runConfig.Cmd.ToString(), ret),
			Code:    ret,
		}
	}

	return nil
}
コード例 #6
0
func killProcessDirectly(container *container.Container) error {
	if _, err := container.WaitStop(10 * time.Second); err != nil {
		// Ensure that we don't kill ourselves
		if pid := container.GetPID(); pid != 0 {
			logrus.Infof("Container %s failed to exit within 10 seconds of kill - trying direct SIGKILL", stringid.TruncateID(container.ID))
			if err := syscall.Kill(pid, 9); err != nil {
				if err != syscall.ESRCH {
					return err
				}
				logrus.Debugf("Cannot kill process (pid=%d) with signal 9: no such process.", pid)
			}
		}
	}
	return nil
}
コード例 #7
0
ファイル: daemon.go プロジェクト: kasisnu/docker
func (daemon *Daemon) shutdownContainer(c *container.Container) error {
	stopTimeout := c.StopTimeout()

	// TODO(windows): Handle docker restart with paused containers
	if c.IsPaused() {
		// To terminate a process in freezer cgroup, we should send
		// SIGTERM to this process then unfreeze it, and the process will
		// force to terminate immediately.
		logrus.Debugf("Found container %s is paused, sending SIGTERM before unpausing it", c.ID)
		sig, ok := signal.SignalMap["TERM"]
		if !ok {
			return fmt.Errorf("System does not support SIGTERM")
		}
		if err := daemon.kill(c, int(sig)); err != nil {
			return fmt.Errorf("sending SIGTERM to container %s with error: %v", c.ID, err)
		}
		if err := daemon.containerUnpause(c); err != nil {
			return fmt.Errorf("Failed to unpause container %s with error: %v", c.ID, err)
		}
		if _, err := c.WaitStop(time.Duration(stopTimeout) * time.Second); err != nil {
			logrus.Debugf("container %s failed to exit in %d second of SIGTERM, sending SIGKILL to force", c.ID, stopTimeout)
			sig, ok := signal.SignalMap["KILL"]
			if !ok {
				return fmt.Errorf("System does not support SIGKILL")
			}
			if err := daemon.kill(c, int(sig)); err != nil {
				logrus.Errorf("Failed to SIGKILL container %s", c.ID)
			}
			c.WaitStop(-1 * time.Second)
			return err
		}
	}
	// If container failed to exit in stopTimeout seconds of SIGTERM, then using the force
	if err := daemon.containerStop(c, stopTimeout); err != nil {
		return fmt.Errorf("Failed to stop container %s with error: %v", c.ID, err)
	}

	c.WaitStop(-1 * time.Second)
	return nil
}