// make push instruction function
func makePush(size uint64, bsize *big.Int) instrFn {
return func(instr instruction, pc *uint64, env Environment, contract *Contract, memory *Memory, stack *stack) {
byts := getData(contract.Code, new(big.Int).SetUint64(*pc+1), bsize)
stack.push(common.Bytes2Big(byts))
*pc += size
}
}
func ecrecoverFunc(in []byte) []byte {
in = common.RightPadBytes(in, 128)
// "in" is (hash, v, r, s), each 32 bytes
// but for ecrecover we want (r, s, v)
r := common.BytesToBig(in[64:96])
s := common.BytesToBig(in[96:128])
// Treat V as a 256bit integer
vbig := common.Bytes2Big(in[32:64])
v := byte(vbig.Uint64())
if !crypto.ValidateSignatureValues(v, r, s) {
glog.V(logger.Debug).Infof("EC RECOVER FAIL: v, r or s value invalid")
return nil
}
// v needs to be at the end and normalized for libsecp256k1
vbignormal := new(big.Int).Sub(vbig, big.NewInt(27))
vnormal := byte(vbignormal.Uint64())
rsv := append(in[64:128], vnormal)
pubKey, err := crypto.Ecrecover(in[:32], rsv)
// make sure the public key is a valid one
if err != nil {
glog.V(logger.Error).Infof("EC RECOVER FAIL: ", err)
return nil
}
// the first byte of pubkey is bitcoin heritage
return common.LeftPadBytes(crypto.Sha3(pubKey[1:])[12:], 32)
}
func opCalldataLoad(instr instruction, pc *uint64, env Environment, contract *Contract, memory *Memory, stack *stack) {
stack.push(common.Bytes2Big(getData(contract.Input, stack.pop(), common.Big32)))
}
func opCaller(instr instruction, pc *uint64, env Environment, contract *Contract, memory *Memory, stack *stack) {
stack.push(common.Bytes2Big(contract.caller.Address().Bytes()))
}
// CompileProgram compiles the given program and return an error when it fails
func CompileProgram(program *Program) (err error) {
if progStatus(atomic.LoadInt32(&program.status)) == progCompile {
return nil
}
atomic.StoreInt32(&program.status, int32(progCompile))
defer func() {
if err != nil {
atomic.StoreInt32(&program.status, int32(progError))
} else {
atomic.StoreInt32(&program.status, int32(progReady))
}
}()
if glog.V(logger.Debug) {
glog.Infof("compiling %x\n", program.Id[:4])
tstart := time.Now()
defer func() {
glog.Infof("compiled %x instrc: %d time: %v\n", program.Id[:4], len(program.instructions), time.Since(tstart))
}()
}
// loop thru the opcodes and "compile" in to instructions
for pc := uint64(0); pc < uint64(len(program.code)); pc++ {
switch op := OpCode(program.code[pc]); op {
case ADD:
program.addInstr(op, pc, opAdd, nil)
case SUB:
program.addInstr(op, pc, opSub, nil)
case MUL:
program.addInstr(op, pc, opMul, nil)
case DIV:
program.addInstr(op, pc, opDiv, nil)
case SDIV:
program.addInstr(op, pc, opSdiv, nil)
case MOD:
program.addInstr(op, pc, opMod, nil)
case SMOD:
program.addInstr(op, pc, opSmod, nil)
case EXP:
program.addInstr(op, pc, opExp, nil)
case SIGNEXTEND:
program.addInstr(op, pc, opSignExtend, nil)
case NOT:
program.addInstr(op, pc, opNot, nil)
case LT:
program.addInstr(op, pc, opLt, nil)
case GT:
program.addInstr(op, pc, opGt, nil)
case SLT:
program.addInstr(op, pc, opSlt, nil)
case SGT:
program.addInstr(op, pc, opSgt, nil)
case EQ:
program.addInstr(op, pc, opEq, nil)
case ISZERO:
program.addInstr(op, pc, opIszero, nil)
case AND:
program.addInstr(op, pc, opAnd, nil)
case OR:
program.addInstr(op, pc, opOr, nil)
case XOR:
program.addInstr(op, pc, opXor, nil)
case BYTE:
program.addInstr(op, pc, opByte, nil)
case ADDMOD:
program.addInstr(op, pc, opAddmod, nil)
case MULMOD:
program.addInstr(op, pc, opMulmod, nil)
case SHA3:
program.addInstr(op, pc, opSha3, nil)
case ADDRESS:
program.addInstr(op, pc, opAddress, nil)
case BALANCE:
program.addInstr(op, pc, opBalance, nil)
case ORIGIN:
program.addInstr(op, pc, opOrigin, nil)
case CALLER:
program.addInstr(op, pc, opCaller, nil)
case CALLVALUE:
program.addInstr(op, pc, opCallValue, nil)
case CALLDATALOAD:
program.addInstr(op, pc, opCalldataLoad, nil)
case CALLDATASIZE:
program.addInstr(op, pc, opCalldataSize, nil)
case CALLDATACOPY:
program.addInstr(op, pc, opCalldataCopy, nil)
case CODESIZE:
program.addInstr(op, pc, opCodeSize, nil)
case EXTCODESIZE:
program.addInstr(op, pc, opExtCodeSize, nil)
case CODECOPY:
program.addInstr(op, pc, opCodeCopy, nil)
case EXTCODECOPY:
program.addInstr(op, pc, opExtCodeCopy, nil)
case GASPRICE:
program.addInstr(op, pc, opGasprice, nil)
case BLOCKHASH:
program.addInstr(op, pc, opBlockhash, nil)
case COINBASE:
program.addInstr(op, pc, opCoinbase, nil)
case TIMESTAMP:
program.addInstr(op, pc, opTimestamp, nil)
case NUMBER:
program.addInstr(op, pc, opNumber, nil)
case DIFFICULTY:
program.addInstr(op, pc, opDifficulty, nil)
case GASLIMIT:
program.addInstr(op, pc, opGasLimit, nil)
case PUSH1, PUSH2, PUSH3, PUSH4, PUSH5, PUSH6, PUSH7, PUSH8, PUSH9, PUSH10, PUSH11, PUSH12, PUSH13, PUSH14, PUSH15, PUSH16, PUSH17, PUSH18, PUSH19, PUSH20, PUSH21, PUSH22, PUSH23, PUSH24, PUSH25, PUSH26, PUSH27, PUSH28, PUSH29, PUSH30, PUSH31, PUSH32:
size := uint64(op - PUSH1 + 1)
bytes := getData([]byte(program.code), new(big.Int).SetUint64(pc+1), new(big.Int).SetUint64(size))
program.addInstr(op, pc, opPush, common.Bytes2Big(bytes))
pc += size
case POP:
program.addInstr(op, pc, opPop, nil)
case DUP1, DUP2, DUP3, DUP4, DUP5, DUP6, DUP7, DUP8, DUP9, DUP10, DUP11, DUP12, DUP13, DUP14, DUP15, DUP16:
program.addInstr(op, pc, opDup, big.NewInt(int64(op-DUP1+1)))
case SWAP1, SWAP2, SWAP3, SWAP4, SWAP5, SWAP6, SWAP7, SWAP8, SWAP9, SWAP10, SWAP11, SWAP12, SWAP13, SWAP14, SWAP15, SWAP16:
program.addInstr(op, pc, opSwap, big.NewInt(int64(op-SWAP1+2)))
case LOG0, LOG1, LOG2, LOG3, LOG4:
program.addInstr(op, pc, opLog, big.NewInt(int64(op-LOG0)))
case MLOAD:
program.addInstr(op, pc, opMload, nil)
case MSTORE:
program.addInstr(op, pc, opMstore, nil)
case MSTORE8:
program.addInstr(op, pc, opMstore8, nil)
case SLOAD:
program.addInstr(op, pc, opSload, nil)
case SSTORE:
program.addInstr(op, pc, opSstore, nil)
case JUMP:
program.addInstr(op, pc, opJump, nil)
case JUMPI:
program.addInstr(op, pc, opJumpi, nil)
case JUMPDEST:
program.addInstr(op, pc, opJumpdest, nil)
program.destinations[pc] = struct{}{}
case PC:
program.addInstr(op, pc, opPc, big.NewInt(int64(pc)))
case MSIZE:
program.addInstr(op, pc, opMsize, nil)
case GAS:
program.addInstr(op, pc, opGas, nil)
case CREATE:
program.addInstr(op, pc, opCreate, nil)
case CALL:
program.addInstr(op, pc, opCall, nil)
case CALLCODE:
program.addInstr(op, pc, opCallCode, nil)
case RETURN:
program.addInstr(op, pc, opReturn, nil)
case SUICIDE:
program.addInstr(op, pc, opSuicide, nil)
case STOP: // Stop the contract
program.addInstr(op, pc, opStop, nil)
default:
program.addInstr(op, pc, nil, nil)
}
}
optimiseProgram(program)
return nil
}
func (b Bloom) Big() *big.Int {
return common.Bytes2Big(b[:])
}
