// Like GosaDecrypt() but operates in-place on buf.
// Returns true if decryption successful and false if not.
// If false is returned, the buffer contents may be destroyed, but only
// if further decryption attempts with other keys would be pointless anyway,
// because of some fatal condition (such as the data not being a multiple of
// the cipher's block size).
func GosaDecryptBuffer(buf *bytes.Buffer, key string) bool {
buf.TrimSpace()
if buf.Len() < 11 {
return false
} // minimum length of unencrypted <xml></xml>
data := buf.Bytes()
if string(data[0:5]) == "<xml>" {
return true
}
// Fixes the following:
// * gosa-si bug in the following line:
// if( $client_answer =~ s/session_id=(\d+)$// ) {
// This leaves the "." before "session_id" which breaks base64
// * new gosa-si protocol has ";IP:PORT" appended to message
// which also breaks base64
for semicolon_period := 0; semicolon_period < len(data); semicolon_period++ {
if data[semicolon_period] == ';' || data[semicolon_period] == '.' {
buf.Trim(0, semicolon_period)
data = buf.Bytes()
break
}
}
aescipher, _ := aes.NewCipher([]byte(util.Md5sum(key)))
crypter := cipher.NewCBCDecrypter(aescipher, config.InitializationVector)
cryptotest := make([]byte, (((3*aes.BlockSize)+2)/3)<<2)
n := copy(cryptotest, data)
cryptotest = cryptotest[0:n]
cryptotest = util.Base64DecodeInPlace(cryptotest)
n = (len(cryptotest) / aes.BlockSize) * aes.BlockSize
cryptotest = cryptotest[0:n]
crypter.CryptBlocks(cryptotest, cryptotest)
if !strings.Contains(string(cryptotest), "<xml>") {
return false
}
data = util.Base64DecodeInPlace(data)
buf.Trim(0, len(data))
data = buf.Bytes()
if buf.Len()%aes.BlockSize != 0 {
// this condition is fatal => further decryption attempts are pointless
buf.Reset()
return false
}
crypter = cipher.NewCBCDecrypter(aescipher, config.InitializationVector)
crypter.CryptBlocks(data, data)
buf.TrimSpace() // removes 0 padding, too
return true
}
func faiConnection(conn *net.TCPConn) {
defer conn.Close()
var err error
err = conn.SetKeepAlive(true)
if err != nil {
util.Log(0, "ERROR! SetKeepAlive: %v", err)
}
var buf bytes.Buffer
defer buf.Reset()
readbuf := make([]byte, 4096)
n := 1
for n != 0 {
n, err = conn.Read(readbuf)
if err != nil && err != io.EOF {
util.Log(0, "ERROR! Read: %v", err)
}
if n == 0 && err == nil {
util.Log(0, "ERROR! Read 0 bytes but no error reported")
}
// Find complete lines terminated by '\n' and process them.
for start := 0; ; {
eol := start
for ; eol < n; eol++ {
if readbuf[eol] == '\n' {
break
}
}
// no \n found, append to buf and continue reading
if eol == n {
buf.Write(readbuf[start:n])
break
}
// append to rest of line to buffered contents
buf.Write(readbuf[start:eol])
start = eol + 1
buf.TrimSpace()
util.Log(2, "DEBUG! FAI monitor message from %v: %v", conn.RemoteAddr(), buf.String())
buf.Reset()
}
}
if buf.Len() != 0 {
util.Log(2, "DEBUG! Incomplete FAI monitor message (i.e. not terminated by \"\\n\") from %v: %v", conn.RemoteAddr(), buf.String())
}
}
func testBuffer() {
var b bytes.Buffer
check(b.String(), "") // String() on fresh variable
b.Reset() // Reset() on fresh variable
check(b.String(), "") // String() after Reset()
b.Reset() // Reset() after Reset()
check(b.String(), "")
check(b.Len(), 0)
// same tests as above with pointer
b2 := &bytes.Buffer{}
check(b2.String(), "")
b2.Reset()
check(b2.String(), "")
b2.Reset()
check(b2.String(), "")
check(b2.Len(), 0)
b2.WriteString("Dies ist ein Test!")
check(b2.String(), "Dies ist ein Test!")
check(b2.Len(), 18)
n, err := b.Write(nil)
check(n, 0)
check(err, nil)
check(b.String(), "")
n, err = b.Write([]byte{})
check(n, 0)
check(err, nil)
check(b.String(), "")
check(b.Pointer(), nil)
check(b.Capacity(), 0)
check(b.Len(), 0)
func() {
defer func() {
check(recover(), bytes.ErrTooLarge)
}()
b.Grow(-1)
}()
n, err = b.Write([]byte{'a'})
check(n, 1)
check(err, nil)
check(b.String(), "a")
check(b.Capacity() >= 1, true)
check(b.Len(), 1)
check(b.Pointer() != nil, true)
check(b.Grow(11), 1)
check(b.Capacity() >= 12, true)
c := b.Capacity()
p := b.Pointer()
check(b.Grow(11), 1) // should not cause actual growth
check(b.Pointer(), p)
check(b.Capacity(), c)
check(b.Len(), 1)
((*[2]byte)(b.Pointer()))[1] = 'z'
check(b.Contains("z"), false)
n, err = b.WriteString("Hallo")
check(n, 5)
check(err, nil)
check(b.String(), "aHallo")
check(b.Pointer(), p)
check(b.Capacity(), c)
check(b.Len(), 6)
b.Reset()
check(b.String(), "")
check(b.Pointer(), nil)
check(b.Capacity(), 0)
check(b.Contains(""), true)
check(b.Contains("a"), false)
b.WriteString("Hallo")
b.WriteByte(' ')
b.Write([]byte{'d', 'i', 'e', 's'})
b.WriteByte(' ')
b.WriteString("ist ")
b.WriteString("ein ")
b.Write([]byte("Test"))
check(b.String(), "Hallo dies ist ein Test")
check(b.Contains("Hallo dies ist ein Test"), true)
check(b.Contains("Test"), true)
check(b.Contains("Hallo"), true)
check(b.Contains("allo"), true)
check(b.Contains(""), true)
check(b.Split(" "), []string{"Hallo", "dies", "ist", "ein", "Test"})
check(b.Split("X"), []string{"Hallo dies ist ein Test"})
check(b.Split("Hallo dies ist ein Test"), []string{"", ""})
check(b.Split("H"), []string{"", "allo dies ist ein Test"})
check(b.Split("Test"), []string{"Hallo dies ist ein ", ""})
check(b.Split("es"), []string{"Hallo di", " ist ein T", "t"})
b.Reset()
b.WriteString(" \n\t Hallo \t\v\n")
check(b.Len(), 15)
p = b.Pointer()
b.TrimSpace()
check(b.String(), "Hallo")
check(b.Len(), 5)
check(b.Pointer(), p)
b.Reset()
b.WriteString(" \n\t \t\v\n")
check(b.Len(), 10)
b.TrimSpace()
check(b.Pointer(), nil)
check(b.Len(), 0)
check(b.Capacity(), 0)
b.TrimSpace()
check(b.Pointer(), nil)
check(b.Len(), 0)
check(b.Capacity(), 0)
b.Reset()
b.WriteString(" \n\t Hallo")
check(b.Len(), 10)
p = b.Pointer()
b.TrimSpace()
check(b.String(), "Hallo")
check(b.Len(), 5)
check(b.Pointer(), p)
b.Reset()
b.WriteString("Hallo \t\v\n")
check(b.Len(), 10)
p = b.Pointer()
b.TrimSpace()
check(b.String(), "Hallo")
check(b.Len(), 5)
check(b.Pointer(), p)
b.Reset()
b.WriteString(" ")
check(b.Len(), 1)
b.TrimSpace()
check(b.Pointer(), nil)
check(b.Len(), 0)
check(b.Capacity(), 0)
b.Reset()
b.WriteString("Der Cottbuser Postkutscher kotzt in den Cottbuser Postkotzkasten")
n = b.Len()
c = b.Capacity()
p = b.Pointer()
b.Trim(-10, 2000)
check(b.Len(), n)
check(b.Capacity(), c)
check(b.Pointer(), p)
b.Trim(2000, -10)
check(b.Len(), 0)
check(b.Capacity(), 0)
check(b.Pointer(), nil)
b.WriteString("Der Cottbuser Postkutscher kotzt in den Cottbuser Postkotzkasten")
b.Trim(4, 4)
check(b.Len(), 0)
check(b.Capacity(), 0)
check(b.Pointer(), nil)
b.WriteString("Der Cottbuser Postkutscher kotzt in den Cottbuser Postkotzkasten")
n = b.Len()
c = b.Capacity()
p = b.Pointer()
b.Trim(0, b.Len()-6)
check(b.Len(), n-6)
check(b.Capacity(), c)
check(b.Pointer(), p)
check(b.String(), "Der Cottbuser Postkutscher kotzt in den Cottbuser Postkotz")
b.Trim(27, b.Len())
check(b.Len(), n-6-27)
check(b.Capacity(), c)
check(b.Pointer(), p)
check(b.String(), "kotzt in den Cottbuser Postkotz")
b.Trim(1, b.Len()-1)
check(b.Len(), n-6-27-2)
check(b.Capacity(), c)
check(b.Pointer(), p)
check(b.String(), "otzt in den Cottbuser Postkot")
b.Reset()
b.Write0(-1)
b.Write0(-100)
b.Write0(0)
check(b.Len(), 0)
check(b.Capacity(), 0)
check(b.Pointer(), nil)
b.Write0(1)
check(b.Len(), 1)
check(b.Capacity(), 1)
check(b.Bytes(), []byte{0})
b.WriteByte(111)
b.Write0(1)
b.WriteByte(222)
b.Write0(2)
b.WriteByte(99)
check(b.Len(), 7)
check(b.Bytes(), []byte{0, 111, 0, 222, 0, 0, 99})
b2.Reset()
slices := [][]byte{}
total := 0
numfakeerrs := 0
for total < 100000 {
c = rand.Intn(30000)
total += c
sl := make([]byte, c)
for i := range sl {
sl[i] = byte(rand.Intn(256))
}
slices = append(slices, sl)
b2.Write(sl)
if total/30000 > numfakeerrs {
slices = append(slices, nil)
numfakeerrs++
}
}
check(numfakeerrs, 3)
slcopy := make([][]byte, len(slices))
copy(slcopy, slices)
slret := &sliceReturner{Slices: slcopy}
b.Reset()
check(b.Capacity(), 0)
check(b.Len(), 0)
check(b.Pointer(), nil)
n = 0
for i := 0; i < numfakeerrs; i++ {
n64, err := b.ReadFrom(slret)
n += int(n64)
check(err, FakeError)
}
n64, err := b.ReadFrom(slret)
n += int(n64)
check(err, nil)
check(n, total)
check(b.Capacity() > b.Len(), true)
check(b.Len(), total)
contents := b.Bytes()
contents2 := b2.Bytes()
check(len(contents), len(contents2))
n = 0
for i := range contents {
if contents[i] != contents2[i] {
break
}
n++
}
check(n, total)
b2.Reset()
for i := range slices {
for k := range slices[i] {
slices[i][k] = 11
}
n, err = b.Read(slices[i])
check(n, len(slices[i]))
check(err, nil)
b2.Write(slices[i])
}
check(b2.Len(), total)
n, err = b.Read(slices[0])
check(n, 0)
check(err, io.EOF)
contents = b.Bytes()
contents2 = b2.Bytes()
check(len(contents), len(contents2))
n = 0
for i := range contents {
if contents[i] != contents2[i] {
break
}
n++
}
check(n, total)
b.WriteString("foo")
foo := make([]byte, 10)
n, err = b.Read(foo)
check(n, 3)
check(err, nil)
check(string(foo[0:3]), "foo")
n64, err = b.Seek(6700, 0)
check(n64, 6700)
check(err, nil)
n64, err = b.Seek(-6000, 1)
check(n64, 700)
check(err, nil)
n64, err = b.Seek(815, 1)
check(n64, 1515)
check(err, nil)
n, err = b.Read(foo)
check(n, len(foo))
check(err, nil)
check(foo, b2.Bytes()[1515:1515+len(foo)])
n64, err = b.Seek(-3, 2)
check(n64, total)
check(err, nil)
n, err = b.Read(foo)
check(n, 3)
check(err, nil)
check(string(foo[0:3]), "foo")
n64, err = b.Seek(999999, 0)
check(n64, b.Len())
check(err, nil)
n64, err = b.Seek(-3, 1)
check(n64, total)
check(err, nil)
n, err = b.Read(foo)
check(n, 3)
check(err, nil)
check(string(foo[0:3]), "foo")
n64, err = b.Seek(-815, 0)
check(n64, 0)
check(err, nil)
n, err = b.Read(foo)
check(n, len(foo))
check(err, nil)
check(foo, b2.Bytes()[0:len(foo)])
}
// Handles one or more messages received over conn. Each message is a single
// line terminated by \n. The message may be encrypted as by security.GosaEncrypt().
func handle_request(tcpconn *net.TCPConn) {
defer tcpconn.Close()
defer atomic.AddInt32(&ActiveConnections, -1)
// defer util.Log(2, "DEBUG! Connection to %v closed", tcpconn.RemoteAddr())
// util.Log(2, "DEBUG! Connection from %v", tcpconn.RemoteAddr())
var err error
err = tcpconn.SetKeepAlive(true)
if err != nil {
util.Log(0, "ERROR! SetKeepAlive: %v", err)
}
var buf bytes.Buffer
defer buf.Reset()
readbuf := make([]byte, 4096)
var conn net.Conn
conn = tcpconn
n := 1
if config.TLSServerConfig != nil {
// If TLS is required, we need to see a STARTTLS before the timeout.
// If TLS is optional we need to accept idle connections for backwards compatibility
if config.TLSRequired {
conn.SetDeadline(time.Now().Add(config.TimeoutTLS))
}
for i := range starttls {
n, err = conn.Read(readbuf[0:1])
if n == 0 {
if i != 0 { // Do not log an error for a port scan that just opens a connection and closes it immediately
util.Log(0, "ERROR! Read error while looking for STARTTLS from %v: %v", conn.RemoteAddr(), err)
}
return
}
buf.Write(readbuf[0:1])
if readbuf[0] == '\r' && starttls[i] == '\n' {
// Read the \n that must follow \r (we don't support lone CR line endings)
conn.Read(readbuf[0:1]) // ignore error. It will pop up again further down the line.
}
if readbuf[0] != starttls[i] {
if config.TLSRequired {
util.Log(0, "ERROR! No STARTTLS from %v, but TLS is required", conn.RemoteAddr())
util.WriteAll(conn, []byte(message.ErrorReply("STARTTLS is required to connect")))
return
}
break
}
if readbuf[0] == '\n' {
buf.Reset() // purge STARTTLS\n from buffer
conn = tls.Server(conn, config.TLSServerConfig)
}
}
}
context := security.ContextFor(conn)
if context == nil {
return
}
for n != 0 {
//util.Log(2, "DEBUG! Receiving from %v", conn.RemoteAddr())
n, err = conn.Read(readbuf)
if err != nil && err != io.EOF {
util.Log(0, "ERROR! Read: %v", err)
}
if err == io.EOF {
util.Log(2, "DEBUG! Connection closed by %v", conn.RemoteAddr())
}
if n == 0 && err == nil {
util.Log(0, "ERROR! Read 0 bytes but no error reported")
}
// Find complete lines terminated by '\n' and process them.
for start := 0; ; {
eol := start
for ; eol < n; eol++ {
if readbuf[eol] == '\n' {
break
}
}
// no \n found, append to buf and continue reading
if eol == n {
buf.Write(readbuf[start:n])
break
}
// append to rest of line to buffered contents
buf.Write(readbuf[start:eol])
start = eol + 1
buf.TrimSpace()
// process the message and get a reply (if applicable)
if buf.Len() > 0 { // ignore empty lines
request_start := time.Now()
reply, disconnect := message.ProcessEncryptedMessage(&buf, context)
buf.Reset()
request_time := time.Since(request_start)
RequestProcessingTimes.Push(request_time)
request_time -= RequestProcessingTimes.Next().(time.Duration)
atomic.AddInt64(&message.RequestProcessingTime, int64(request_time))
if reply.Len() > 0 {
util.Log(2, "DEBUG! Sending %v bytes reply to %v", reply.Len(), conn.RemoteAddr())
var deadline time.Time // zero value means "no deadline"
if config.Timeout >= 0 {
deadline = time.Now().Add(config.Timeout)
}
conn.SetWriteDeadline(deadline)
_, err := util.WriteAll(conn, reply.Bytes())
if err != nil {
util.Log(0, "ERROR! WriteAll: %v", err)
}
reply.Reset()
util.WriteAll(conn, []byte{'\r', '\n'})
}
if disconnect {
util.Log(1, "INFO! Forcing disconnect of %v because of error", conn.RemoteAddr())
return
}
if Shutdown {
util.Log(1, "INFO! Forcing disconnect of %v because of go-susi shutdown", conn.RemoteAddr())
return
}
}
}
}
if buf.Len() != 0 {
util.Log(0, "ERROR! Incomplete message from %v (i.e. not terminated by \"\\n\") of %v bytes: %v", conn.RemoteAddr(), buf.Len(), buf.String())
}
}