// UnmarshalFlag satisifes the flags.Unmarshaler interface.
func (a *AmountFlag) UnmarshalFlag(value string) error {
value = strings.TrimSuffix(value, " BTC")
valueF64, err := strconv.ParseFloat(value, 64)
if err != nil {
return err
}
amount, err := btcutil.NewAmount(valueF64)
if err != nil {
return err
}
a.Amount = amount
return nil
}
// makeInputSource creates an InputSource that creates inputs for every unspent
// output with non-zero output values. The target amount is ignored since every
// output is consumed. The InputSource does not return any previous output
// scripts as they are not needed for creating the unsinged transaction and are
// looked up again by the wallet during the call to signrawtransaction.
func makeInputSource(outputs []btcjson.ListUnspentResult) txauthor.InputSource {
var (
totalInputValue btcutil.Amount
inputs = make([]*wire.TxIn, 0, len(outputs))
sourceErr error
)
for _, output := range outputs {
outputAmount, err := btcutil.NewAmount(output.Amount)
if err != nil {
sourceErr = fmt.Errorf(
"invalid amount `%v` in listunspent result",
output.Amount)
break
}
if outputAmount == 0 {
continue
}
if !saneOutputValue(outputAmount) {
sourceErr = fmt.Errorf(
"impossible output amount `%v` in listunspent result",
outputAmount)
break
}
totalInputValue += outputAmount
previousOutPoint, err := parseOutPoint(&output)
if err != nil {
sourceErr = fmt.Errorf(
"invalid data in listunspent result: %v",
err)
break
}
inputs = append(inputs, wire.NewTxIn(&previousOutPoint, nil))
}
if sourceErr == nil && totalInputValue == 0 {
sourceErr = noInputValue{}
}
return func(btcutil.Amount) (btcutil.Amount, []*wire.TxIn, [][]byte, error) {
return totalInputValue, inputs, nil, sourceErr
}
}
// TestScriptValidTests ensures all of the tests in script_valid.json pass as
// expected.
func TestScriptValidTests(t *testing.T) {
file, err := ioutil.ReadFile("data/script_valid.json")
if err != nil {
t.Errorf("TestBitcoinValidTests: %v\n", err)
return
}
var tests [][]interface{}
err = json.Unmarshal(file, &tests)
if err != nil {
t.Errorf("TestBitcoindValidTests couldn't Unmarshal: %v",
err)
return
}
sigCache := NewSigCache(10)
sigCacheToggle := []bool{true, false}
for _, useSigCache := range sigCacheToggle {
for i, test := range tests {
// Skip comments
if len(test) == 1 {
continue
}
name, err := testName(test)
if err != nil {
t.Errorf("TestBitcoindValidTests: invalid test #%d",
i)
continue
}
var (
witness [][]byte
index int
inputAmt btcutil.Amount
)
if len(test) == 5 {
witTest := test[0].([]interface{})
// If this is a witness test, then the final
// element within the slice is the input
// amount, so we ignore all but the last
// element in order to parse the witness stack.
strWitnesses := witTest[:len(witTest)-1]
witness, err = parseWitnessStack(strWitnesses)
if err != nil {
t.Errorf("%s: can't parse witness; %v", name, err)
continue
}
inputAmt, err = btcutil.NewAmount(witTest[len(witTest)-1].(float64))
if err != nil {
t.Errorf("%s: can't parse input amt: %v",
name, err)
continue
}
index += 1
}
scriptSig, err := parseShortForm(test[index].(string))
if err != nil {
t.Errorf("%s: can't parse scriptSig; %v", name, err)
continue
}
scriptPubKey, err := parseShortForm(test[index+1].(string))
if err != nil {
t.Errorf("%s: can't parse scriptPubkey; %v", name, err)
continue
}
flags, err := parseScriptFlags(test[index+2].(string))
if err != nil {
t.Errorf("%s: %v", name, err)
continue
}
tx := createSpendingTx(witness, scriptSig, scriptPubKey,
int64(inputAmt))
var vm *Engine
if useSigCache {
vm, err = NewEngine(scriptPubKey, tx, 0, flags,
sigCache, nil, int64(inputAmt))
} else {
vm, err = NewEngine(scriptPubKey, tx, 0, flags,
nil, nil, int64(inputAmt))
}
if err != nil {
t.Errorf("%s failed to create script: %v", name, err)
continue
}
err = vm.Execute()
if err != nil {
t.Errorf("%s failed to execute: %v", name, err)
continue
}
}
}
}
// loadConfig initializes and parses the config using a config file and command
// line options.
//
// The configuration proceeds as follows:
// 1) Start with a default config with sane settings
// 2) Pre-parse the command line to check for an alternative config file
// 3) Load configuration file overwriting defaults with any specified options
// 4) Parse CLI options and overwrite/add any specified options
//
// The above results in btcd functioning properly without any config settings
// while still allowing the user to override settings with config files and
// command line options. Command line options always take precedence.
func loadConfig() (*config, []string, error) {
// Default config.
cfg := config{
ConfigFile: defaultConfigFile,
DebugLevel: defaultLogLevel,
MaxPeers: defaultMaxPeers,
BanDuration: defaultBanDuration,
BanThreshold: defaultBanThreshold,
RPCMaxClients: defaultMaxRPCClients,
RPCMaxWebsockets: defaultMaxRPCWebsockets,
RPCMaxConcurrentReqs: defaultMaxRPCConcurrentReqs,
DataDir: defaultDataDir,
LogDir: defaultLogDir,
DbType: defaultDbType,
RPCKey: defaultRPCKeyFile,
RPCCert: defaultRPCCertFile,
MinRelayTxFee: mempool.DefaultMinRelayTxFee.ToBTC(),
FreeTxRelayLimit: defaultFreeTxRelayLimit,
BlockMinSize: defaultBlockMinSize,
BlockMaxSize: defaultBlockMaxSize,
BlockMinWeight: defaultBlockMinWeight,
BlockMaxWeight: defaultBlockMaxWeight,
BlockPrioritySize: mempool.DefaultBlockPrioritySize,
MaxOrphanTxs: defaultMaxOrphanTransactions,
SigCacheMaxSize: defaultSigCacheMaxSize,
Generate: defaultGenerate,
TxIndex: defaultTxIndex,
AddrIndex: defaultAddrIndex,
}
// Service options which are only added on Windows.
serviceOpts := serviceOptions{}
// Pre-parse the command line options to see if an alternative config
// file or the version flag was specified. Any errors aside from the
// help message error can be ignored here since they will be caught by
// the final parse below.
preCfg := cfg
preParser := newConfigParser(&preCfg, &serviceOpts, flags.HelpFlag)
_, err := preParser.Parse()
if err != nil {
if e, ok := err.(*flags.Error); ok && e.Type == flags.ErrHelp {
fmt.Fprintln(os.Stderr, err)
return nil, nil, err
}
}
// Show the version and exit if the version flag was specified.
appName := filepath.Base(os.Args[0])
appName = strings.TrimSuffix(appName, filepath.Ext(appName))
usageMessage := fmt.Sprintf("Use %s -h to show usage", appName)
if preCfg.ShowVersion {
fmt.Println(appName, "version", version())
os.Exit(0)
}
// Perform service command and exit if specified. Invalid service
// commands show an appropriate error. Only runs on Windows since
// the runServiceCommand function will be nil when not on Windows.
if serviceOpts.ServiceCommand != "" && runServiceCommand != nil {
err := runServiceCommand(serviceOpts.ServiceCommand)
if err != nil {
fmt.Fprintln(os.Stderr, err)
}
os.Exit(0)
}
// Load additional config from file.
var configFileError error
parser := newConfigParser(&cfg, &serviceOpts, flags.Default)
if !(preCfg.RegressionTest || preCfg.SimNet) || preCfg.ConfigFile !=
defaultConfigFile {
if _, err := os.Stat(preCfg.ConfigFile); os.IsNotExist(err) {
err := createDefaultConfigFile(preCfg.ConfigFile)
if err != nil {
fmt.Fprintf(os.Stderr, "Error creating a "+
"default config file: %v\n", err)
}
}
err := flags.NewIniParser(parser).ParseFile(preCfg.ConfigFile)
if err != nil {
if _, ok := err.(*os.PathError); !ok {
fmt.Fprintf(os.Stderr, "Error parsing config "+
"file: %v\n", err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
configFileError = err
}
}
// Don't add peers from the config file when in regression test mode.
if preCfg.RegressionTest && len(cfg.AddPeers) > 0 {
cfg.AddPeers = nil
}
// Parse command line options again to ensure they take precedence.
remainingArgs, err := parser.Parse()
if err != nil {
if e, ok := err.(*flags.Error); !ok || e.Type != flags.ErrHelp {
fmt.Fprintln(os.Stderr, usageMessage)
}
return nil, nil, err
}
// Create the home directory if it doesn't already exist.
funcName := "loadConfig"
err = os.MkdirAll(defaultHomeDir, 0700)
if err != nil {
// Show a nicer error message if it's because a symlink is
// linked to a directory that does not exist (probably because
// it's not mounted).
if e, ok := err.(*os.PathError); ok && os.IsExist(err) {
if link, lerr := os.Readlink(e.Path); lerr == nil {
str := "is symlink %s -> %s mounted?"
err = fmt.Errorf(str, e.Path, link)
}
}
str := "%s: Failed to create home directory: %v"
err := fmt.Errorf(str, funcName, err)
fmt.Fprintln(os.Stderr, err)
return nil, nil, err
}
// Multiple networks can't be selected simultaneously.
numNets := 0
// Count number of network flags passed; assign active network params
// while we're at it
if cfg.TestNet3 {
numNets++
activeNetParams = &testNet3Params
}
if cfg.RegressionTest {
numNets++
activeNetParams = ®ressionNetParams
}
if cfg.SimNet {
numNets++
// Also disable dns seeding on the simulation test network.
activeNetParams = &simNetParams
cfg.DisableDNSSeed = true
}
if numNets > 1 {
str := "%s: The testnet, regtest, segnet, and simnet params " +
"can't be used together -- choose one of the four"
err := fmt.Errorf(str, funcName)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
// Set the default policy for relaying non-standard transactions
// according to the default of the active network. The set
// configuration value takes precedence over the default value for the
// selected network.
relayNonStd := activeNetParams.RelayNonStdTxs
switch {
case cfg.RelayNonStd && cfg.RejectNonStd:
str := "%s: rejectnonstd and relaynonstd cannot be used " +
"together -- choose only one"
err := fmt.Errorf(str, funcName)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
case cfg.RejectNonStd:
relayNonStd = false
case cfg.RelayNonStd:
relayNonStd = true
}
cfg.RelayNonStd = relayNonStd
// Append the network type to the data directory so it is "namespaced"
// per network. In addition to the block database, there are other
// pieces of data that are saved to disk such as address manager state.
// All data is specific to a network, so namespacing the data directory
// means each individual piece of serialized data does not have to
// worry about changing names per network and such.
cfg.DataDir = cleanAndExpandPath(cfg.DataDir)
cfg.DataDir = filepath.Join(cfg.DataDir, netName(activeNetParams))
// Append the network type to the log directory so it is "namespaced"
// per network in the same fashion as the data directory.
cfg.LogDir = cleanAndExpandPath(cfg.LogDir)
cfg.LogDir = filepath.Join(cfg.LogDir, netName(activeNetParams))
// Special show command to list supported subsystems and exit.
if cfg.DebugLevel == "show" {
fmt.Println("Supported subsystems", supportedSubsystems())
os.Exit(0)
}
// Initialize logging at the default logging level.
initSeelogLogger(filepath.Join(cfg.LogDir, defaultLogFilename))
setLogLevels(defaultLogLevel)
// Parse, validate, and set debug log level(s).
if err := parseAndSetDebugLevels(cfg.DebugLevel); err != nil {
err := fmt.Errorf("%s: %v", funcName, err.Error())
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
// Validate database type.
if !validDbType(cfg.DbType) {
str := "%s: The specified database type [%v] is invalid -- " +
"supported types %v"
err := fmt.Errorf(str, funcName, cfg.DbType, knownDbTypes)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
// Validate profile port number
if cfg.Profile != "" {
profilePort, err := strconv.Atoi(cfg.Profile)
if err != nil || profilePort < 1024 || profilePort > 65535 {
str := "%s: The profile port must be between 1024 and 65535"
err := fmt.Errorf(str, funcName)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
}
// Don't allow ban durations that are too short.
if cfg.BanDuration < time.Second {
str := "%s: The banduration option may not be less than 1s -- parsed [%v]"
err := fmt.Errorf(str, funcName, cfg.BanDuration)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
// --addPeer and --connect do not mix.
if len(cfg.AddPeers) > 0 && len(cfg.ConnectPeers) > 0 {
str := "%s: the --addpeer and --connect options can not be " +
"mixed"
err := fmt.Errorf(str, funcName)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
// --proxy or --connect without --listen disables listening.
if (cfg.Proxy != "" || len(cfg.ConnectPeers) > 0) &&
len(cfg.Listeners) == 0 {
cfg.DisableListen = true
}
// Connect means no DNS seeding.
if len(cfg.ConnectPeers) > 0 {
cfg.DisableDNSSeed = true
}
// Add the default listener if none were specified. The default
// listener is all addresses on the listen port for the network
// we are to connect to.
if len(cfg.Listeners) == 0 {
cfg.Listeners = []string{
net.JoinHostPort("", activeNetParams.DefaultPort),
}
}
// Check to make sure limited and admin users don't have the same username
if cfg.RPCUser == cfg.RPCLimitUser && cfg.RPCUser != "" {
str := "%s: --rpcuser and --rpclimituser must not specify the " +
"same username"
err := fmt.Errorf(str, funcName)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
// Check to make sure limited and admin users don't have the same password
if cfg.RPCPass == cfg.RPCLimitPass && cfg.RPCPass != "" {
str := "%s: --rpcpass and --rpclimitpass must not specify the " +
"same password"
err := fmt.Errorf(str, funcName)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
// The RPC server is disabled if no username or password is provided.
if (cfg.RPCUser == "" || cfg.RPCPass == "") &&
(cfg.RPCLimitUser == "" || cfg.RPCLimitPass == "") {
cfg.DisableRPC = true
}
// Default RPC to listen on localhost only.
if !cfg.DisableRPC && len(cfg.RPCListeners) == 0 {
addrs, err := net.LookupHost("localhost")
if err != nil {
return nil, nil, err
}
cfg.RPCListeners = make([]string, 0, len(addrs))
for _, addr := range addrs {
addr = net.JoinHostPort(addr, activeNetParams.rpcPort)
cfg.RPCListeners = append(cfg.RPCListeners, addr)
}
}
if cfg.RPCMaxConcurrentReqs < 0 {
str := "%s: The rpcmaxwebsocketconcurrentrequests option may " +
"not be less than 0 -- parsed [%d]"
err := fmt.Errorf(str, funcName, cfg.RPCMaxConcurrentReqs)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
// Validate the the minrelaytxfee.
cfg.minRelayTxFee, err = btcutil.NewAmount(cfg.MinRelayTxFee)
if err != nil {
str := "%s: invalid minrelaytxfee: %v"
err := fmt.Errorf(str, funcName, err)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
// Limit the max block size to a sane value.
if cfg.BlockMaxSize < blockMaxSizeMin || cfg.BlockMaxSize >
blockMaxSizeMax {
str := "%s: The blockmaxsize option must be in between %d " +
"and %d -- parsed [%d]"
err := fmt.Errorf(str, funcName, blockMaxSizeMin,
blockMaxSizeMax, cfg.BlockMaxSize)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
// Limit the max block weight to a sane value.
if cfg.BlockMaxWeight < blockMaxWeightMin ||
cfg.BlockMaxWeight > blockMaxWeightMax {
str := "%s: The blockmaxweight option must be in between %d " +
"and %d -- parsed [%d]"
err := fmt.Errorf(str, funcName, blockMaxWeightMin,
blockMaxWeightMax, cfg.BlockMaxWeight)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
// Limit the max orphan count to a sane vlue.
if cfg.MaxOrphanTxs < 0 {
str := "%s: The maxorphantx option may not be less than 0 " +
"-- parsed [%d]"
err := fmt.Errorf(str, funcName, cfg.MaxOrphanTxs)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
// Limit the block priority and minimum block sizes to max block size.
cfg.BlockPrioritySize = minUint32(cfg.BlockPrioritySize, cfg.BlockMaxSize)
cfg.BlockMinSize = minUint32(cfg.BlockMinSize, cfg.BlockMaxSize)
cfg.BlockMinWeight = minUint32(cfg.BlockMinWeight, cfg.BlockMaxWeight)
// TODO(roasbeef): need to do multi-dimensional limiting based on if
// both weight AND size are set, or just one.
// --txindex and --droptxindex do not mix.
if cfg.TxIndex && cfg.DropTxIndex {
err := fmt.Errorf("%s: the --txindex and --droptxindex "+
"options may not be activated at the same time",
funcName)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
// --addrindex and --dropaddrindex do not mix.
if cfg.AddrIndex && cfg.DropAddrIndex {
err := fmt.Errorf("%s: the --addrindex and --dropaddrindex "+
"options may not be activated at the same time",
funcName)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
// --addrindex and --droptxindex do not mix.
if cfg.AddrIndex && cfg.DropTxIndex {
err := fmt.Errorf("%s: the --addrindex and --droptxindex "+
"options may not be activated at the same time "+
"because the address index relies on the transaction "+
"index",
funcName)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
// Check getwork keys are valid and saved parsed versions.
cfg.miningAddrs = make([]btcutil.Address, 0, len(cfg.GetWorkKeys)+
len(cfg.MiningAddrs))
for _, strAddr := range cfg.GetWorkKeys {
addr, err := btcutil.DecodeAddress(strAddr,
activeNetParams.Params)
if err != nil {
str := "%s: getworkkey '%s' failed to decode: %v"
err := fmt.Errorf(str, funcName, strAddr, err)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
if !addr.IsForNet(activeNetParams.Params) {
str := "%s: getworkkey '%s' is on the wrong network"
err := fmt.Errorf(str, funcName, strAddr)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
cfg.miningAddrs = append(cfg.miningAddrs, addr)
}
// Check mining addresses are valid and saved parsed versions.
for _, strAddr := range cfg.MiningAddrs {
addr, err := btcutil.DecodeAddress(strAddr, activeNetParams.Params)
if err != nil {
str := "%s: mining address '%s' failed to decode: %v"
err := fmt.Errorf(str, funcName, strAddr, err)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
if !addr.IsForNet(activeNetParams.Params) {
str := "%s: mining address '%s' is on the wrong network"
err := fmt.Errorf(str, funcName, strAddr)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
cfg.miningAddrs = append(cfg.miningAddrs, addr)
}
// Ensure there is at least one mining address when the generate flag is
// set.
if cfg.Generate && len(cfg.MiningAddrs) == 0 {
str := "%s: the generate flag is set, but there are no mining " +
"addresses specified "
err := fmt.Errorf(str, funcName)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
// Add default port to all listener addresses if needed and remove
// duplicate addresses.
cfg.Listeners = normalizeAddresses(cfg.Listeners,
activeNetParams.DefaultPort)
// Add default port to all rpc listener addresses if needed and remove
// duplicate addresses.
cfg.RPCListeners = normalizeAddresses(cfg.RPCListeners,
activeNetParams.rpcPort)
// Only allow TLS to be disabled if the RPC is bound to localhost
// addresses.
if !cfg.DisableRPC && cfg.DisableTLS {
allowedTLSListeners := map[string]struct{}{
"localhost": {},
"127.0.0.1": {},
"::1": {},
}
for _, addr := range cfg.RPCListeners {
host, _, err := net.SplitHostPort(addr)
if err != nil {
str := "%s: RPC listen interface '%s' is " +
"invalid: %v"
err := fmt.Errorf(str, funcName, addr, err)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
if _, ok := allowedTLSListeners[host]; !ok {
str := "%s: the --notls option may not be used " +
"when binding RPC to non localhost " +
"addresses: %s"
err := fmt.Errorf(str, funcName, addr)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
}
}
// Add default port to all added peer addresses if needed and remove
// duplicate addresses.
cfg.AddPeers = normalizeAddresses(cfg.AddPeers,
activeNetParams.DefaultPort)
cfg.ConnectPeers = normalizeAddresses(cfg.ConnectPeers,
activeNetParams.DefaultPort)
// Tor stream isolation requires either proxy or onion proxy to be set.
if cfg.TorIsolation && cfg.Proxy == "" && cfg.OnionProxy == "" {
str := "%s: Tor stream isolation requires either proxy or " +
"onionproxy to be set"
err := fmt.Errorf(str, funcName)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
// Setup dial and DNS resolution (lookup) functions depending on the
// specified options. The default is to use the standard net.Dial
// function as well as the system DNS resolver. When a proxy is
// specified, the dial function is set to the proxy specific dial
// function and the lookup is set to use tor (unless --noonion is
// specified in which case the system DNS resolver is used).
cfg.dial = net.Dial
cfg.lookup = net.LookupIP
if cfg.Proxy != "" {
_, _, err := net.SplitHostPort(cfg.Proxy)
if err != nil {
str := "%s: Proxy address '%s' is invalid: %v"
err := fmt.Errorf(str, funcName, cfg.Proxy, err)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
if cfg.TorIsolation &&
(cfg.ProxyUser != "" || cfg.ProxyPass != "") {
fmt.Fprintln(os.Stderr, "Tor isolation set -- "+
"overriding specified proxy user credentials")
}
proxy := &socks.Proxy{
Addr: cfg.Proxy,
Username: cfg.ProxyUser,
Password: cfg.ProxyPass,
TorIsolation: cfg.TorIsolation,
}
cfg.dial = proxy.Dial
if !cfg.NoOnion {
cfg.lookup = func(host string) ([]net.IP, error) {
return connmgr.TorLookupIP(host, cfg.Proxy)
}
}
}
// Setup onion address dial and DNS resolution (lookup) functions
// depending on the specified options. The default is to use the
// same dial and lookup functions selected above. However, when an
// onion-specific proxy is specified, the onion address dial and
// lookup functions are set to use the onion-specific proxy while
// leaving the normal dial and lookup functions as selected above.
// This allows .onion address traffic to be routed through a different
// proxy than normal traffic.
if cfg.OnionProxy != "" {
_, _, err := net.SplitHostPort(cfg.OnionProxy)
if err != nil {
str := "%s: Onion proxy address '%s' is invalid: %v"
err := fmt.Errorf(str, funcName, cfg.OnionProxy, err)
fmt.Fprintln(os.Stderr, err)
fmt.Fprintln(os.Stderr, usageMessage)
return nil, nil, err
}
if cfg.TorIsolation &&
(cfg.OnionProxyUser != "" || cfg.OnionProxyPass != "") {
fmt.Fprintln(os.Stderr, "Tor isolation set -- "+
"overriding specified onionproxy user "+
"credentials ")
}
cfg.oniondial = func(a, b string) (net.Conn, error) {
proxy := &socks.Proxy{
Addr: cfg.OnionProxy,
Username: cfg.OnionProxyUser,
Password: cfg.OnionProxyPass,
TorIsolation: cfg.TorIsolation,
}
return proxy.Dial(a, b)
}
cfg.onionlookup = func(host string) ([]net.IP, error) {
return connmgr.TorLookupIP(host, cfg.OnionProxy)
}
} else {
cfg.oniondial = cfg.dial
cfg.onionlookup = cfg.lookup
}
// Specifying --noonion means the onion address dial and DNS resolution
// (lookup) functions result in an error.
if cfg.NoOnion {
cfg.oniondial = func(a, b string) (net.Conn, error) {
return nil, errors.New("tor has been disabled")
}
cfg.onionlookup = func(a string) ([]net.IP, error) {
return nil, errors.New("tor has been disabled")
}
}
// Warn about missing config file only after all other configuration is
// done. This prevents the warning on help messages and invalid
// options. Note this should go directly before the return.
if configFileError != nil {
btcdLog.Warnf("%v", configFileError)
}
return &cfg, remainingArgs, nil
}