コード例 #1
0
/**
直接读取一个slice的值,这个slice的值可能是string也可能是数字
*/
func getSliceValue(pre uint8, suf uint8, array *[]byte, inputFile string, param *Parameters) string {
	var returnValue string
	switch pre {
	case 0: //then the next 6 bits represent the length
		reIndex(array, inputFile, uint64(suf), param)
		returnValue = assembelString(getArraySlice((*param).SliceStart, (*param).SliceEnd, array))
	case 64: //then an additional byte is read from the stream. The combined 14 bits represent the length
		reIndexSliceEnd(array, inputFile, 1, param)
		slice := getArraySlice((*param).SliceStart, (*param).SliceEnd, array)
		//把slice里边的两个字节转换成数字
		slice_value := changeByteToUint64(slice, binary.BigEndian)
		value := slice_value & 0x3FFF
		reIndex(array, inputFile, uint64(value), param)
		returnValue = assembelString(getArraySlice((*param).SliceStart, (*param).SliceEnd, array))
	case 128: //hen the remaining 6 bits are discarded. Additional 4 bytes are read from the stream, and those 4 bytes represent the length
		// (in big endian format in RDB version 6)
		var slice_value uint64
		reIndex(array, inputFile, 4, param)
		slice := getArraySlice((*param).SliceStart, (*param).SliceEnd, array)
		//把slice里边的四个字节转换成数字
		slice_value = changeByteToUint64(slice, binary.BigEndian)
		reIndex(array, inputFile, slice_value, param)
		returnValue = assembelString(getArraySlice((*param).SliceStart, (*param).SliceEnd, array))
	case 192: //then the next object is encoded in a special format. The remaining 6 bits indicate the format
		switch suf {
		case 0: //0 indicates that an 8 bit integer follows.
			reIndex(array, inputFile, 1, param)
			returnValue = strconv.FormatInt(changeByteToInt64(getArraySlice((*param).SliceStart, (*param).SliceEnd, array), binary.LittleEndian), 10)
		case 1: //1 indicates that a 16 bit integer follows.
			reIndex(array, inputFile, 2, param)
			returnValue = strconv.FormatInt(changeByteToInt64(getArraySlice((*param).SliceStart, (*param).SliceEnd, array), binary.LittleEndian), 10)
		case 2: //2 indicates that a 32 bit integer follows.
			reIndex(array, inputFile, 4, param)
			returnValue = strconv.FormatInt(changeByteToInt64(getArraySlice((*param).SliceStart, (*param).SliceEnd, array), binary.LittleEndian), 10)
		case 3, 4: //实验证明C3代表压缩的字符串,不是C4
			//读取压缩字符串的长度
			compressed_length := readOneByteAndGetNum(array, inputFile, param)
			//读取未压缩字符串的长度
			uncompressed_length := readOneByteAndGetNum(array, inputFile, param)
			//解压缩字符串
			reIndex(array, inputFile, compressed_length, param)
			in_data := (*array)[(*param).SliceStart:(*param).SliceEnd]
			uncompressedByte := lzf.Lzf_dcompress(in_data, uncompressed_length)
			str := string(uncompressedByte)
			returnValue = str
		}
	}
	return returnValue
}
コード例 #2
0
/**
读取代表内容的字节,并根据值类型解析
此方法只被:ZipMap Encoding, ZipList Encoding, parseIntSetEncoding调用,因为
他们在压缩的时候是所有值联合压缩
*/
func readContentByteAndParse(array *[]byte, types int, inputFile string, param *Parameters) int {

	var length int
	var pContentSlice *[]byte
	//首先读取一个字节,按照这个字节的前两个bit和后六个bit的值来判断
	//改如何读取后边的Content内容
	slice := readNextNByte(array, inputFile, 1, param)
	pre, suf := calByte(slice[0])

	switch pre {
	case 0: //then the next 6 bits represent the length
		contentSlice := readNextNByte(array, inputFile, uint64(suf), param)
		pContentSlice = &contentSlice
		length = callParseFunc(pContentSlice, types, param)
	case 64: //then an additional byte is read from the stream. The combined 14 bits represent the length

		reIndexSliceEnd(array, inputFile, 1, param)
		slice := getArraySlice((*param).SliceStart, (*param).SliceEnd, array)
		//把slice里边的两个字节转换成数字
		slice_value := changeByteToUint64(slice, binary.BigEndian)
		//获取后14个bit代表的数字
		value := slice_value & 0x3FFF
		contentSlice := readNextNByte(array, inputFile, uint64(value), param)
		pContentSlice = &contentSlice
		length = callParseFunc(pContentSlice, types, param)
	case 128: //hen the remaining 6 bits are discarded. Additional 4 bytes are read from the stream, and those 4 bytes represent the length
		//(in big endian format in RDB version 6)
		var slice_value uint64

		//读取后4个bytes
		reIndex(array, inputFile, 4, param)
		slice := getArraySlice((*param).SliceStart, (*param).SliceEnd, array)

		//把slice里边的四个字节转换成数字
		slice_value = changeByteToUint64(slice, binary.BigEndian)

		//读取这4bytes代表的数字的字节
		contentSlice := readNextNByte(array, inputFile, uint64(slice_value), param)
		pContentSlice = &contentSlice
		length = callParseFunc(pContentSlice, types, param)
	case 192: //then the next object is encoded in a special format. The remaining 6 bits indicate the format
		//在读取代表内容的字节里边,这里应该用不到,除了压缩
		switch suf {
		case 0: //0 indicates that an 8 bit integer follows.
			reIndex(array, inputFile, 1, param)
			slice_value := changeByteToInt64(getArraySlice((*param).SliceStart, (*param).SliceEnd, array), binary.LittleEndian)
			contentSlice := readNextNByte(array, inputFile, uint64(slice_value), param)
			pContentSlice = &contentSlice
			length = callParseFunc(pContentSlice, types, param)
		case 1: //1 indicates that a 16 bit integer follows.
			reIndex(array, inputFile, 2, param)
			slice_value := changeByteToInt64(getArraySlice((*param).SliceStart, (*param).SliceEnd, array), binary.LittleEndian)
			contentSlice := readNextNByte(array, inputFile, uint64(slice_value), param)
			pContentSlice = &contentSlice
			length = callParseFunc(pContentSlice, types, param)
		case 2: //2 indicates that a 32 bit integer follows.
			reIndex(array, inputFile, 4, param)
			slice_value := changeByteToInt64(getArraySlice((*param).SliceStart, (*param).SliceEnd, array), binary.LittleEndian)
			contentSlice := readNextNByte(array, inputFile, uint64(slice_value), param)
			pContentSlice = &contentSlice
			length = callParseFunc(pContentSlice, types, param)
		case 3, 4: //4 indicates that a compressed string follows.
			//读取压缩字符串的长度
			compressed_length := readOneByteAndGetNum(array, inputFile, param)
			//读取未压缩字符串的长度
			uncompressed_length := readOneByteAndGetNum(array, inputFile, param)
			//解压缩字符串
			reIndex(array, inputFile, compressed_length, param)
			in_data := (*array)[(*param).SliceStart:(*param).SliceEnd]
			unComByte := lzf.Lzf_dcompress(in_data, uncompressed_length)
			var pUnComByte *[]byte = &unComByte
			length = callParseFunc(pUnComByte, types, param)
		}
	}
	return length
}