func (v versionToResourceToFieldMapping) filterField(groupVersion unversioned.GroupVersion, resourceType, field, value string) (newField, newValue string, err error) {
rMapping, ok := v[groupVersion]
if !ok {
glog.Warningf("Field selector: %v - %v - %v - %v: need to check if this is versioned correctly.", groupVersion, resourceType, field, value)
return field, value, nil
}
newField, newValue, err = rMapping.filterField(resourceType, field, value)
if err != nil {
// This is only a warning until we find and fix all of the client's usages.
glog.Warningf("Field selector: %v - %v - %v - %v: need to check if this is versioned correctly.", groupVersion, resourceType, field, value)
return field, value, nil
}
return newField, newValue, nil
}
// GetMountRefs finds all other references to the device referenced
// by mountPath; returns a list of paths.
func GetMountRefs(mounter Interface, mountPath string) ([]string, error) {
mps, err := mounter.List()
if err != nil {
return nil, err
}
// Find the device name.
deviceName := ""
for i := range mps {
if mps[i].Path == mountPath {
deviceName = mps[i].Device
break
}
}
// Find all references to the device.
var refs []string
if deviceName == "" {
glog.Warningf("could not determine device for path: %q", mountPath)
} else {
for i := range mps {
if mps[i].Device == deviceName && mps[i].Path != mountPath {
refs = append(refs, mps[i].Path)
}
}
}
return refs, nil
}
// forward dials the remote host specific in req, upgrades the request, starts
// listeners for each port specified in ports, and forwards local connections
// to the remote host via streams.
func (pf *PortForwarder) forward() error {
var err error
listenSuccess := false
for _, port := range pf.ports {
err = pf.listenOnPort(&port)
switch {
case err == nil:
listenSuccess = true
default:
glog.Warningf("Unable to listen on port %d: %v", port.Local, err)
}
}
if !listenSuccess {
return fmt.Errorf("Unable to listen on any of the requested ports: %v", pf.ports)
}
close(pf.Ready)
// wait for interrupt or conn closure
select {
case <-pf.stopChan:
case <-pf.streamConn.CloseChan():
util.HandleError(errors.New("lost connection to pod"))
}
return nil
}
// WarnWordSepNormalizeFunc changes and warns for flags that contain "_" separators
func WarnWordSepNormalizeFunc(f *pflag.FlagSet, name string) pflag.NormalizedName {
if strings.Contains(name, "_") {
nname := strings.Replace(name, "_", "-", -1)
glog.Warningf("%s is DEPRECATED and will be removed in a future version. Use %s instead.", name, nname)
return pflag.NormalizedName(nname)
}
return pflag.NormalizedName(name)
}
// newSpdyStream is the internal new stream handler used by spdystream.Connection.Serve.
// It calls connection's newStreamHandler, giving it the opportunity to accept or reject
// the stream. If newStreamHandler returns an error, the stream is rejected. If not, the
// stream is accepted and registered with the connection.
func (c *connection) newSpdyStream(stream *spdystream.Stream) {
err := c.newStreamHandler(stream)
rejectStream := (err != nil)
if rejectStream {
glog.Warningf("Stream rejected: %v", err)
stream.Reset()
return
}
c.registerStream(stream)
stream.SendReply(http.Header{}, rejectStream)
}
// BuildConfigFromFlags is a helper function that builds configs from a master
// url or a kubeconfig filepath. These are passed in as command line flags for cluster
// components. Warnings should reflect this usage. If neither masterUrl or kubeconfigPath
// are passed in we fallback to inClusterConfig. If inClusterConfig fails, we fallback
// to the default config.
func BuildConfigFromFlags(masterUrl, kubeconfigPath string) (*client.Config, error) {
if kubeconfigPath == "" && masterUrl == "" {
glog.Warningf("Neither --kubeconfig nor --master was specified. Using the inClusterConfig. This might not work.")
kubeconfig, err := client.InClusterConfig()
if err == nil {
return kubeconfig, nil
}
glog.Warning("error creating inClusterConfig, falling back to default config: %v", err)
}
return NewNonInteractiveDeferredLoadingClientConfig(
&ClientConfigLoadingRules{ExplicitPath: kubeconfigPath},
&ConfigOverrides{ClusterInfo: clientcmdapi.Cluster{Server: masterUrl}}).ClientConfig()
}
// New returns a new Interface which will exec iptables.
func New(exec utilexec.Interface, dbus utildbus.Interface, protocol Protocol) Interface {
vstring, err := getIptablesVersionString(exec)
if err != nil {
glog.Warningf("Error checking iptables version, assuming version at least %s: %v", MinCheckVersion, err)
vstring = MinCheckVersion
}
runner := &runner{
exec: exec,
dbus: dbus,
protocol: protocol,
hasCheck: getIptablesHasCheckCommand(vstring),
waitFlag: getIptablesWaitFlag(vstring),
}
runner.connectToFirewallD()
return runner
}
// formatAndMount uses unix utils to format and mount the given disk
func (mounter *SafeFormatAndMount) formatAndMount(source string, target string, fstype string, options []string) error {
options = append(options, "defaults")
// Run fsck on the disk to fix repairable issues
args := []string{"-a", source}
cmd := mounter.Runner.Command("fsck", args...)
out, err := cmd.CombinedOutput()
if err != nil {
ee, isExitError := err.(utilExec.ExitError)
switch {
case err == utilExec.ErrExecutableNotFound:
glog.Warningf("'fsck' not found on system; continuing mount without running 'fsck'.")
case isExitError && ee.ExitStatus() == fsckErrorsCorrected:
glog.Infof("Device %s has errors which were corrected by fsck.", source)
case isExitError && ee.ExitStatus() == fsckErrorsUncorrected:
return fmt.Errorf("'fsck' found errors on device %s but could not correct them: %s.", source, string(out))
case isExitError && ee.ExitStatus() > fsckErrorsUncorrected:
glog.Infof("`fsck` error %s", string(out))
}
}
// Try to mount the disk
err = mounter.Interface.Mount(source, target, fstype, options)
if err != nil {
// It is possible that this disk is not formatted. Double check using diskLooksUnformatted
notFormatted, err := mounter.diskLooksUnformatted(source)
if err == nil && notFormatted {
args = []string{source}
// Disk is unformatted so format it.
// Use 'ext4' as the default
if len(fstype) == 0 {
fstype = "ext4"
}
if fstype == "ext4" || fstype == "ext3" {
args = []string{"-E", "lazy_itable_init=0,lazy_journal_init=0", "-F", source}
}
cmd := mounter.Runner.Command("mkfs."+fstype, args...)
_, err := cmd.CombinedOutput()
if err == nil {
// the disk has been formatted sucessfully try to mount it again.
return mounter.Interface.Mount(source, target, fstype, options)
}
return err
}
}
return err
}
func DialURL(url *url.URL, transport http.RoundTripper) (net.Conn, error) {
dialAddr := netutil.CanonicalAddr(url)
dialer, _ := util.Dialer(transport)
switch url.Scheme {
case "http":
if dialer != nil {
return dialer("tcp", dialAddr)
}
return net.Dial("tcp", dialAddr)
case "https":
// Get the tls config from the transport if we recognize it
var tlsConfig *tls.Config
var tlsConn *tls.Conn
var err error
tlsConfig, _ = util.TLSClientConfig(transport)
if dialer != nil {
// We have a dialer; use it to open the connection, then
// create a tls client using the connection.
netConn, err := dialer("tcp", dialAddr)
if err != nil {
return nil, err
}
if tlsConfig == nil {
// tls.Client requires non-nil config
glog.Warningf("using custom dialer with no TLSClientConfig. Defaulting to InsecureSkipVerify")
// tls.Handshake() requires ServerName or InsecureSkipVerify
tlsConfig = &tls.Config{
InsecureSkipVerify: true,
}
} else if len(tlsConfig.ServerName) == 0 && !tlsConfig.InsecureSkipVerify {
// tls.Handshake() requires ServerName or InsecureSkipVerify
// infer the ServerName from the hostname we're connecting to.
inferredHost := dialAddr
if host, _, err := net.SplitHostPort(dialAddr); err == nil {
inferredHost = host
}
// Make a copy to avoid polluting the provided config
tlsConfigCopy := *tlsConfig
tlsConfigCopy.ServerName = inferredHost
tlsConfig = &tlsConfigCopy
}
tlsConn = tls.Client(netConn, tlsConfig)
if err := tlsConn.Handshake(); err != nil {
netConn.Close()
return nil, err
}
} else {
// Dial
tlsConn, err = tls.Dial("tcp", dialAddr, tlsConfig)
if err != nil {
return nil, err
}
}
// Return if we were configured to skip validation
if tlsConfig != nil && tlsConfig.InsecureSkipVerify {
return tlsConn, nil
}
// Verify
host, _, _ := net.SplitHostPort(dialAddr)
if err := tlsConn.VerifyHostname(host); err != nil {
tlsConn.Close()
return nil, err
}
return tlsConn, nil
default:
return nil, fmt.Errorf("Unknown scheme: %s", url.Scheme)
}
}
